| /* | |
| * Copyright (C) 2012 Bachmann electronic GmbH | |
| * Christian Gmeiner <christian.gmeiner@gmail.com> | |
| * | |
| * Backlight driver for ot200 visualisation device from | |
| * Bachmann electronic GmbH. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published by | |
| * the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/fb.h> | |
| #include <linux/backlight.h> | |
| #include <linux/gpio.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/cs5535.h> | |
| static struct cs5535_mfgpt_timer *pwm_timer; | |
| /* this array defines the mapping of brightness in % to pwm frequency */ | |
| static const u8 dim_table[101] = {0, 0, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, | |
| 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, | |
| 4, 5, 5, 5, 5, 6, 6, 6, 7, 7, 7, 8, 8, 9, 9, | |
| 10, 10, 11, 11, 12, 12, 13, 14, 15, 15, 16, | |
| 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, | |
| 30, 31, 33, 35, 37, 39, 41, 43, 45, 47, 50, | |
| 53, 55, 58, 61, 65, 68, 72, 75, 79, 84, 88, | |
| 93, 97, 103, 108, 114, 120, 126, 133, 140, | |
| 147, 155, 163}; | |
| struct ot200_backlight_data { | |
| int current_brightness; | |
| }; | |
| #define GPIO_DIMM 27 | |
| #define SCALE 1 | |
| #define CMP1MODE 0x2 /* compare on GE; output high on compare | |
| * greater than or equal */ | |
| #define PWM_SETUP (SCALE | CMP1MODE << 6 | MFGPT_SETUP_CNTEN) | |
| #define MAX_COMP2 163 | |
| static int ot200_backlight_update_status(struct backlight_device *bl) | |
| { | |
| struct ot200_backlight_data *data = bl_get_data(bl); | |
| int brightness = bl->props.brightness; | |
| if (bl->props.state & BL_CORE_FBBLANK) | |
| brightness = 0; | |
| /* enable or disable PWM timer */ | |
| if (brightness == 0) | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, 0); | |
| else if (data->current_brightness == 0) { | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_COUNTER, 0); | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, | |
| MFGPT_SETUP_CNTEN); | |
| } | |
| /* apply new brightness value */ | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1, | |
| MAX_COMP2 - dim_table[brightness]); | |
| data->current_brightness = brightness; | |
| return 0; | |
| } | |
| static int ot200_backlight_get_brightness(struct backlight_device *bl) | |
| { | |
| struct ot200_backlight_data *data = bl_get_data(bl); | |
| return data->current_brightness; | |
| } | |
| static const struct backlight_ops ot200_backlight_ops = { | |
| .update_status = ot200_backlight_update_status, | |
| .get_brightness = ot200_backlight_get_brightness, | |
| }; | |
| static int ot200_backlight_probe(struct platform_device *pdev) | |
| { | |
| struct backlight_device *bl; | |
| struct ot200_backlight_data *data; | |
| struct backlight_properties props; | |
| int retval = 0; | |
| /* request gpio */ | |
| if (devm_gpio_request(&pdev->dev, GPIO_DIMM, | |
| "ot200 backlight dimmer") < 0) { | |
| dev_err(&pdev->dev, "failed to request GPIO %d\n", GPIO_DIMM); | |
| return -ENODEV; | |
| } | |
| /* request timer */ | |
| pwm_timer = cs5535_mfgpt_alloc_timer(7, MFGPT_DOMAIN_ANY); | |
| if (!pwm_timer) { | |
| dev_err(&pdev->dev, "MFGPT 7 not available\n"); | |
| return -ENODEV; | |
| } | |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); | |
| if (!data) { | |
| retval = -ENOMEM; | |
| goto error_devm_kzalloc; | |
| } | |
| /* setup gpio */ | |
| cs5535_gpio_set(GPIO_DIMM, GPIO_OUTPUT_ENABLE); | |
| cs5535_gpio_set(GPIO_DIMM, GPIO_OUTPUT_AUX1); | |
| /* setup timer */ | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1, 0); | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP2, MAX_COMP2); | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, PWM_SETUP); | |
| data->current_brightness = 100; | |
| props.max_brightness = 100; | |
| props.brightness = 100; | |
| props.type = BACKLIGHT_RAW; | |
| bl = devm_backlight_device_register(&pdev->dev, dev_name(&pdev->dev), | |
| &pdev->dev, data, &ot200_backlight_ops, | |
| &props); | |
| if (IS_ERR(bl)) { | |
| dev_err(&pdev->dev, "failed to register backlight\n"); | |
| retval = PTR_ERR(bl); | |
| goto error_devm_kzalloc; | |
| } | |
| platform_set_drvdata(pdev, bl); | |
| return 0; | |
| error_devm_kzalloc: | |
| cs5535_mfgpt_free_timer(pwm_timer); | |
| return retval; | |
| } | |
| static int ot200_backlight_remove(struct platform_device *pdev) | |
| { | |
| /* on module unload set brightness to 100% */ | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_COUNTER, 0); | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); | |
| cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1, | |
| MAX_COMP2 - dim_table[100]); | |
| cs5535_mfgpt_free_timer(pwm_timer); | |
| return 0; | |
| } | |
| static struct platform_driver ot200_backlight_driver = { | |
| .driver = { | |
| .name = "ot200-backlight", | |
| }, | |
| .probe = ot200_backlight_probe, | |
| .remove = ot200_backlight_remove, | |
| }; | |
| module_platform_driver(ot200_backlight_driver); | |
| MODULE_DESCRIPTION("backlight driver for ot200 visualisation device"); | |
| MODULE_AUTHOR("Christian Gmeiner <christian.gmeiner@gmail.com>"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:ot200-backlight"); |