| /* | |
| * drivers/mb862xx/mb862xxfb_accel.c | |
| * | |
| * Fujitsu Carmine/Coral-P(A)/Lime framebuffer driver acceleration support | |
| * | |
| * (C) 2007 Alexander Shishkin <virtuoso@slind.org> | |
| * (C) 2009 Valentin Sitdikov <v.sitdikov@gmail.com> | |
| * (C) 2009 Siemens AG | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| */ | |
| #include <linux/fb.h> | |
| #include <linux/delay.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/slab.h> | |
| #if defined(CONFIG_OF) | |
| #include <linux/of_platform.h> | |
| #endif | |
| #include "mb862xxfb.h" | |
| #include "mb862xx_reg.h" | |
| #include "mb862xxfb_accel.h" | |
| static void mb862xxfb_write_fifo(u32 count, u32 *data, struct fb_info *info) | |
| { | |
| struct mb862xxfb_par *par = info->par; | |
| static u32 free; | |
| u32 total = 0; | |
| while (total < count) { | |
| if (free) { | |
| outreg(geo, GDC_GEO_REG_INPUT_FIFO, data[total]); | |
| total++; | |
| free--; | |
| } else { | |
| free = (u32) inreg(draw, GDC_REG_FIFO_COUNT); | |
| } | |
| } | |
| } | |
| static void mb86290fb_copyarea(struct fb_info *info, | |
| const struct fb_copyarea *area) | |
| { | |
| __u32 cmd[6]; | |
| cmd[0] = (GDC_TYPE_SETREGISTER << 24) | (1 << 16) | GDC_REG_MODE_BITMAP; | |
| /* Set raster operation */ | |
| cmd[1] = (2 << 7) | (GDC_ROP_COPY << 9); | |
| cmd[2] = GDC_TYPE_BLTCOPYP << 24; | |
| if (area->sx >= area->dx && area->sy >= area->dy) | |
| cmd[2] |= GDC_CMD_BLTCOPY_TOP_LEFT << 16; | |
| else if (area->sx >= area->dx && area->sy <= area->dy) | |
| cmd[2] |= GDC_CMD_BLTCOPY_BOTTOM_LEFT << 16; | |
| else if (area->sx <= area->dx && area->sy >= area->dy) | |
| cmd[2] |= GDC_CMD_BLTCOPY_TOP_RIGHT << 16; | |
| else | |
| cmd[2] |= GDC_CMD_BLTCOPY_BOTTOM_RIGHT << 16; | |
| cmd[3] = (area->sy << 16) | area->sx; | |
| cmd[4] = (area->dy << 16) | area->dx; | |
| cmd[5] = (area->height << 16) | area->width; | |
| mb862xxfb_write_fifo(6, cmd, info); | |
| } | |
| /* | |
| * Fill in the cmd array /GDC FIFO commands/ to draw a 1bit image. | |
| * Make sure cmd has enough room! | |
| */ | |
| static void mb86290fb_imageblit1(u32 *cmd, u16 step, u16 dx, u16 dy, | |
| u16 width, u16 height, u32 fgcolor, | |
| u32 bgcolor, const struct fb_image *image, | |
| struct fb_info *info) | |
| { | |
| int i; | |
| unsigned const char *line; | |
| u16 bytes; | |
| /* set colors and raster operation regs */ | |
| cmd[0] = (GDC_TYPE_SETREGISTER << 24) | (1 << 16) | GDC_REG_MODE_BITMAP; | |
| /* Set raster operation */ | |
| cmd[1] = (2 << 7) | (GDC_ROP_COPY << 9); | |
| cmd[2] = | |
| (GDC_TYPE_SETCOLORREGISTER << 24) | (GDC_CMD_BODY_FORE_COLOR << 16); | |
| cmd[3] = fgcolor; | |
| cmd[4] = | |
| (GDC_TYPE_SETCOLORREGISTER << 24) | (GDC_CMD_BODY_BACK_COLOR << 16); | |
| cmd[5] = bgcolor; | |
| i = 0; | |
| line = image->data; | |
| bytes = (image->width + 7) >> 3; | |
| /* and the image */ | |
| cmd[6] = (GDC_TYPE_DRAWBITMAPP << 24) | | |
| (GDC_CMD_BITMAP << 16) | (2 + (step * height)); | |
| cmd[7] = (dy << 16) | dx; | |
| cmd[8] = (height << 16) | width; | |
| while (i < height) { | |
| memcpy(&cmd[9 + i * step], line, step << 2); | |
| #ifdef __LITTLE_ENDIAN | |
| { | |
| int k = 0; | |
| for (k = 0; k < step; k++) | |
| cmd[9 + i * step + k] = | |
| cpu_to_be32(cmd[9 + i * step + k]); | |
| } | |
| #endif | |
| line += bytes; | |
| i++; | |
| } | |
| } | |
| /* | |
| * Fill in the cmd array /GDC FIFO commands/ to draw a 8bit image. | |
| * Make sure cmd has enough room! | |
| */ | |
| static void mb86290fb_imageblit8(u32 *cmd, u16 step, u16 dx, u16 dy, | |
| u16 width, u16 height, u32 fgcolor, | |
| u32 bgcolor, const struct fb_image *image, | |
| struct fb_info *info) | |
| { | |
| int i, j; | |
| unsigned const char *line, *ptr; | |
| u16 bytes; | |
| cmd[0] = (GDC_TYPE_DRAWBITMAPP << 24) | | |
| (GDC_CMD_BLT_DRAW << 16) | (2 + (height * step)); | |
| cmd[1] = (dy << 16) | dx; | |
| cmd[2] = (height << 16) | width; | |
| i = 0; | |
| line = ptr = image->data; | |
| bytes = image->width; | |
| while (i < height) { | |
| ptr = line; | |
| for (j = 0; j < step; j++) { | |
| cmd[3 + i * step + j] = | |
| (((u32 *) (info->pseudo_palette))[*ptr]) & 0xffff; | |
| ptr++; | |
| cmd[3 + i * step + j] |= | |
| ((((u32 *) (info-> | |
| pseudo_palette))[*ptr]) & 0xffff) << 16; | |
| ptr++; | |
| } | |
| line += bytes; | |
| i++; | |
| } | |
| } | |
| /* | |
| * Fill in the cmd array /GDC FIFO commands/ to draw a 16bit image. | |
| * Make sure cmd has enough room! | |
| */ | |
| static void mb86290fb_imageblit16(u32 *cmd, u16 step, u16 dx, u16 dy, | |
| u16 width, u16 height, u32 fgcolor, | |
| u32 bgcolor, const struct fb_image *image, | |
| struct fb_info *info) | |
| { | |
| int i; | |
| unsigned const char *line; | |
| u16 bytes; | |
| i = 0; | |
| line = image->data; | |
| bytes = image->width << 1; | |
| cmd[0] = (GDC_TYPE_DRAWBITMAPP << 24) | | |
| (GDC_CMD_BLT_DRAW << 16) | (2 + step * height); | |
| cmd[1] = (dy << 16) | dx; | |
| cmd[2] = (height << 16) | width; | |
| while (i < height) { | |
| memcpy(&cmd[3 + i * step], line, step); | |
| line += bytes; | |
| i++; | |
| } | |
| } | |
| static void mb86290fb_imageblit(struct fb_info *info, | |
| const struct fb_image *image) | |
| { | |
| int mdr; | |
| u32 *cmd = NULL; | |
| void (*cmdfn) (u32 *, u16, u16, u16, u16, u16, u32, u32, | |
| const struct fb_image *, struct fb_info *) = NULL; | |
| u32 cmdlen; | |
| u32 fgcolor = 0, bgcolor = 0; | |
| u16 step; | |
| u16 width = image->width, height = image->height; | |
| u16 dx = image->dx, dy = image->dy; | |
| int x2, y2, vxres, vyres; | |
| mdr = (GDC_ROP_COPY << 9); | |
| x2 = image->dx + image->width; | |
| y2 = image->dy + image->height; | |
| vxres = info->var.xres_virtual; | |
| vyres = info->var.yres_virtual; | |
| x2 = min(x2, vxres); | |
| y2 = min(y2, vyres); | |
| width = x2 - dx; | |
| height = y2 - dy; | |
| switch (image->depth) { | |
| case 1: | |
| step = (width + 31) >> 5; | |
| cmdlen = 9 + height * step; | |
| cmdfn = mb86290fb_imageblit1; | |
| if (info->fix.visual == FB_VISUAL_TRUECOLOR || | |
| info->fix.visual == FB_VISUAL_DIRECTCOLOR) { | |
| fgcolor = | |
| ((u32 *) (info->pseudo_palette))[image->fg_color]; | |
| bgcolor = | |
| ((u32 *) (info->pseudo_palette))[image->bg_color]; | |
| } else { | |
| fgcolor = image->fg_color; | |
| bgcolor = image->bg_color; | |
| } | |
| break; | |
| case 8: | |
| step = (width + 1) >> 1; | |
| cmdlen = 3 + height * step; | |
| cmdfn = mb86290fb_imageblit8; | |
| break; | |
| case 16: | |
| step = (width + 1) >> 1; | |
| cmdlen = 3 + height * step; | |
| cmdfn = mb86290fb_imageblit16; | |
| break; | |
| default: | |
| cfb_imageblit(info, image); | |
| return; | |
| } | |
| cmd = kmalloc(cmdlen * 4, GFP_DMA); | |
| if (!cmd) | |
| return cfb_imageblit(info, image); | |
| cmdfn(cmd, step, dx, dy, width, height, fgcolor, bgcolor, image, info); | |
| mb862xxfb_write_fifo(cmdlen, cmd, info); | |
| kfree(cmd); | |
| } | |
| static void mb86290fb_fillrect(struct fb_info *info, | |
| const struct fb_fillrect *rect) | |
| { | |
| u32 x2, y2, vxres, vyres, height, width, fg; | |
| u32 cmd[7]; | |
| vxres = info->var.xres_virtual; | |
| vyres = info->var.yres_virtual; | |
| if (!rect->width || !rect->height || rect->dx > vxres | |
| || rect->dy > vyres) | |
| return; | |
| /* We could use hardware clipping but on many cards you get around | |
| * hardware clipping by writing to framebuffer directly. */ | |
| x2 = rect->dx + rect->width; | |
| y2 = rect->dy + rect->height; | |
| x2 = min(x2, vxres); | |
| y2 = min(y2, vyres); | |
| width = x2 - rect->dx; | |
| height = y2 - rect->dy; | |
| if (info->fix.visual == FB_VISUAL_TRUECOLOR || | |
| info->fix.visual == FB_VISUAL_DIRECTCOLOR) | |
| fg = ((u32 *) (info->pseudo_palette))[rect->color]; | |
| else | |
| fg = rect->color; | |
| switch (rect->rop) { | |
| case ROP_XOR: | |
| /* Set raster operation */ | |
| cmd[1] = (2 << 7) | (GDC_ROP_XOR << 9); | |
| break; | |
| case ROP_COPY: | |
| /* Set raster operation */ | |
| cmd[1] = (2 << 7) | (GDC_ROP_COPY << 9); | |
| break; | |
| } | |
| cmd[0] = (GDC_TYPE_SETREGISTER << 24) | (1 << 16) | GDC_REG_MODE_BITMAP; | |
| /* cmd[1] set earlier */ | |
| cmd[2] = | |
| (GDC_TYPE_SETCOLORREGISTER << 24) | (GDC_CMD_BODY_FORE_COLOR << 16); | |
| cmd[3] = fg; | |
| cmd[4] = (GDC_TYPE_DRAWRECTP << 24) | (GDC_CMD_BLT_FILL << 16); | |
| cmd[5] = (rect->dy << 16) | (rect->dx); | |
| cmd[6] = (height << 16) | width; | |
| mb862xxfb_write_fifo(7, cmd, info); | |
| } | |
| void mb862xxfb_init_accel(struct fb_info *info, int xres) | |
| { | |
| struct mb862xxfb_par *par = info->par; | |
| if (info->var.bits_per_pixel == 32) { | |
| info->fbops->fb_fillrect = cfb_fillrect; | |
| info->fbops->fb_copyarea = cfb_copyarea; | |
| info->fbops->fb_imageblit = cfb_imageblit; | |
| } else { | |
| outreg(disp, GC_L0EM, 3); | |
| info->fbops->fb_fillrect = mb86290fb_fillrect; | |
| info->fbops->fb_copyarea = mb86290fb_copyarea; | |
| info->fbops->fb_imageblit = mb86290fb_imageblit; | |
| } | |
| outreg(draw, GDC_REG_DRAW_BASE, 0); | |
| outreg(draw, GDC_REG_MODE_MISC, 0x8000); | |
| outreg(draw, GDC_REG_X_RESOLUTION, xres); | |
| info->flags |= | |
| FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT | | |
| FBINFO_HWACCEL_IMAGEBLIT; | |
| info->fix.accel = 0xff; /*FIXME: add right define */ | |
| } | |
| EXPORT_SYMBOL(mb862xxfb_init_accel); | |
| MODULE_LICENSE("GPL v2"); |