| /* | |
| * linux/drivers/video/omap2/dss/rfbi.c | |
| * | |
| * Copyright (C) 2009 Nokia Corporation | |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> | |
| * | |
| * Some code and ideas taken from drivers/video/omap/ driver | |
| * by Imre Deak. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published by | |
| * the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program. If not, see <http://www.gnu.org/licenses/>. | |
| */ | |
| #define DSS_SUBSYS_NAME "RFBI" | |
| #include <linux/kernel.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/export.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/delay.h> | |
| #include <linux/kfifo.h> | |
| #include <linux/ktime.h> | |
| #include <linux/hrtimer.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/semaphore.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/component.h> | |
| #include <video/omapfb_dss.h> | |
| #include "dss.h" | |
| struct rfbi_reg { u16 idx; }; | |
| #define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) | |
| #define RFBI_REVISION RFBI_REG(0x0000) | |
| #define RFBI_SYSCONFIG RFBI_REG(0x0010) | |
| #define RFBI_SYSSTATUS RFBI_REG(0x0014) | |
| #define RFBI_CONTROL RFBI_REG(0x0040) | |
| #define RFBI_PIXEL_CNT RFBI_REG(0x0044) | |
| #define RFBI_LINE_NUMBER RFBI_REG(0x0048) | |
| #define RFBI_CMD RFBI_REG(0x004c) | |
| #define RFBI_PARAM RFBI_REG(0x0050) | |
| #define RFBI_DATA RFBI_REG(0x0054) | |
| #define RFBI_READ RFBI_REG(0x0058) | |
| #define RFBI_STATUS RFBI_REG(0x005c) | |
| #define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) | |
| #define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) | |
| #define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) | |
| #define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) | |
| #define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) | |
| #define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) | |
| #define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) | |
| #define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) | |
| #define REG_FLD_MOD(idx, val, start, end) \ | |
| rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) | |
| enum omap_rfbi_cycleformat { | |
| OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, | |
| OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, | |
| OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, | |
| OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, | |
| }; | |
| enum omap_rfbi_datatype { | |
| OMAP_DSS_RFBI_DATATYPE_12 = 0, | |
| OMAP_DSS_RFBI_DATATYPE_16 = 1, | |
| OMAP_DSS_RFBI_DATATYPE_18 = 2, | |
| OMAP_DSS_RFBI_DATATYPE_24 = 3, | |
| }; | |
| enum omap_rfbi_parallelmode { | |
| OMAP_DSS_RFBI_PARALLELMODE_8 = 0, | |
| OMAP_DSS_RFBI_PARALLELMODE_9 = 1, | |
| OMAP_DSS_RFBI_PARALLELMODE_12 = 2, | |
| OMAP_DSS_RFBI_PARALLELMODE_16 = 3, | |
| }; | |
| static int rfbi_convert_timings(struct rfbi_timings *t); | |
| static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); | |
| static struct { | |
| struct platform_device *pdev; | |
| void __iomem *base; | |
| unsigned long l4_khz; | |
| enum omap_rfbi_datatype datatype; | |
| enum omap_rfbi_parallelmode parallelmode; | |
| enum omap_rfbi_te_mode te_mode; | |
| int te_enabled; | |
| void (*framedone_callback)(void *data); | |
| void *framedone_callback_data; | |
| struct omap_dss_device *dssdev[2]; | |
| struct semaphore bus_lock; | |
| struct omap_video_timings timings; | |
| int pixel_size; | |
| int data_lines; | |
| struct rfbi_timings intf_timings; | |
| struct omap_dss_device output; | |
| } rfbi; | |
| static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) | |
| { | |
| __raw_writel(val, rfbi.base + idx.idx); | |
| } | |
| static inline u32 rfbi_read_reg(const struct rfbi_reg idx) | |
| { | |
| return __raw_readl(rfbi.base + idx.idx); | |
| } | |
| static int rfbi_runtime_get(void) | |
| { | |
| int r; | |
| DSSDBG("rfbi_runtime_get\n"); | |
| r = pm_runtime_get_sync(&rfbi.pdev->dev); | |
| WARN_ON(r < 0); | |
| return r < 0 ? r : 0; | |
| } | |
| static void rfbi_runtime_put(void) | |
| { | |
| int r; | |
| DSSDBG("rfbi_runtime_put\n"); | |
| r = pm_runtime_put_sync(&rfbi.pdev->dev); | |
| WARN_ON(r < 0 && r != -ENOSYS); | |
| } | |
| static void rfbi_bus_lock(void) | |
| { | |
| down(&rfbi.bus_lock); | |
| } | |
| static void rfbi_bus_unlock(void) | |
| { | |
| up(&rfbi.bus_lock); | |
| } | |
| static void rfbi_write_command(const void *buf, u32 len) | |
| { | |
| switch (rfbi.parallelmode) { | |
| case OMAP_DSS_RFBI_PARALLELMODE_8: | |
| { | |
| const u8 *b = buf; | |
| for (; len; len--) | |
| rfbi_write_reg(RFBI_CMD, *b++); | |
| break; | |
| } | |
| case OMAP_DSS_RFBI_PARALLELMODE_16: | |
| { | |
| const u16 *w = buf; | |
| BUG_ON(len & 1); | |
| for (; len; len -= 2) | |
| rfbi_write_reg(RFBI_CMD, *w++); | |
| break; | |
| } | |
| case OMAP_DSS_RFBI_PARALLELMODE_9: | |
| case OMAP_DSS_RFBI_PARALLELMODE_12: | |
| default: | |
| BUG(); | |
| } | |
| } | |
| static void rfbi_read_data(void *buf, u32 len) | |
| { | |
| switch (rfbi.parallelmode) { | |
| case OMAP_DSS_RFBI_PARALLELMODE_8: | |
| { | |
| u8 *b = buf; | |
| for (; len; len--) { | |
| rfbi_write_reg(RFBI_READ, 0); | |
| *b++ = rfbi_read_reg(RFBI_READ); | |
| } | |
| break; | |
| } | |
| case OMAP_DSS_RFBI_PARALLELMODE_16: | |
| { | |
| u16 *w = buf; | |
| BUG_ON(len & ~1); | |
| for (; len; len -= 2) { | |
| rfbi_write_reg(RFBI_READ, 0); | |
| *w++ = rfbi_read_reg(RFBI_READ); | |
| } | |
| break; | |
| } | |
| case OMAP_DSS_RFBI_PARALLELMODE_9: | |
| case OMAP_DSS_RFBI_PARALLELMODE_12: | |
| default: | |
| BUG(); | |
| } | |
| } | |
| static void rfbi_write_data(const void *buf, u32 len) | |
| { | |
| switch (rfbi.parallelmode) { | |
| case OMAP_DSS_RFBI_PARALLELMODE_8: | |
| { | |
| const u8 *b = buf; | |
| for (; len; len--) | |
| rfbi_write_reg(RFBI_PARAM, *b++); | |
| break; | |
| } | |
| case OMAP_DSS_RFBI_PARALLELMODE_16: | |
| { | |
| const u16 *w = buf; | |
| BUG_ON(len & 1); | |
| for (; len; len -= 2) | |
| rfbi_write_reg(RFBI_PARAM, *w++); | |
| break; | |
| } | |
| case OMAP_DSS_RFBI_PARALLELMODE_9: | |
| case OMAP_DSS_RFBI_PARALLELMODE_12: | |
| default: | |
| BUG(); | |
| } | |
| } | |
| static void rfbi_write_pixels(const void __iomem *buf, int scr_width, | |
| u16 x, u16 y, | |
| u16 w, u16 h) | |
| { | |
| int start_offset = scr_width * y + x; | |
| int horiz_offset = scr_width - w; | |
| int i; | |
| if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && | |
| rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { | |
| const u16 __iomem *pd = buf; | |
| pd += start_offset; | |
| for (; h; --h) { | |
| for (i = 0; i < w; ++i) { | |
| const u8 __iomem *b = (const u8 __iomem *)pd; | |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); | |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); | |
| ++pd; | |
| } | |
| pd += horiz_offset; | |
| } | |
| } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && | |
| rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { | |
| const u32 __iomem *pd = buf; | |
| pd += start_offset; | |
| for (; h; --h) { | |
| for (i = 0; i < w; ++i) { | |
| const u8 __iomem *b = (const u8 __iomem *)pd; | |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2)); | |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); | |
| rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); | |
| ++pd; | |
| } | |
| pd += horiz_offset; | |
| } | |
| } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && | |
| rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { | |
| const u16 __iomem *pd = buf; | |
| pd += start_offset; | |
| for (; h; --h) { | |
| for (i = 0; i < w; ++i) { | |
| rfbi_write_reg(RFBI_PARAM, __raw_readw(pd)); | |
| ++pd; | |
| } | |
| pd += horiz_offset; | |
| } | |
| } else { | |
| BUG(); | |
| } | |
| } | |
| static int rfbi_transfer_area(struct omap_dss_device *dssdev, | |
| void (*callback)(void *data), void *data) | |
| { | |
| u32 l; | |
| int r; | |
| struct omap_overlay_manager *mgr = rfbi.output.manager; | |
| u16 width = rfbi.timings.x_res; | |
| u16 height = rfbi.timings.y_res; | |
| /*BUG_ON(callback == 0);*/ | |
| BUG_ON(rfbi.framedone_callback != NULL); | |
| DSSDBG("rfbi_transfer_area %dx%d\n", width, height); | |
| dss_mgr_set_timings(mgr, &rfbi.timings); | |
| r = dss_mgr_enable(mgr); | |
| if (r) | |
| return r; | |
| rfbi.framedone_callback = callback; | |
| rfbi.framedone_callback_data = data; | |
| rfbi_write_reg(RFBI_PIXEL_CNT, width * height); | |
| l = rfbi_read_reg(RFBI_CONTROL); | |
| l = FLD_MOD(l, 1, 0, 0); /* enable */ | |
| if (!rfbi.te_enabled) | |
| l = FLD_MOD(l, 1, 4, 4); /* ITE */ | |
| rfbi_write_reg(RFBI_CONTROL, l); | |
| return 0; | |
| } | |
| static void framedone_callback(void *data) | |
| { | |
| void (*callback)(void *data); | |
| DSSDBG("FRAMEDONE\n"); | |
| REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); | |
| callback = rfbi.framedone_callback; | |
| rfbi.framedone_callback = NULL; | |
| if (callback != NULL) | |
| callback(rfbi.framedone_callback_data); | |
| } | |
| #if 1 /* VERBOSE */ | |
| static void rfbi_print_timings(void) | |
| { | |
| u32 l; | |
| u32 time; | |
| l = rfbi_read_reg(RFBI_CONFIG(0)); | |
| time = 1000000000 / rfbi.l4_khz; | |
| if (l & (1 << 4)) | |
| time *= 2; | |
| DSSDBG("Tick time %u ps\n", time); | |
| l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); | |
| DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " | |
| "REONTIME %d, REOFFTIME %d\n", | |
| l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, | |
| (l >> 20) & 0x0f, (l >> 24) & 0x3f); | |
| l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); | |
| DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " | |
| "ACCESSTIME %d\n", | |
| (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, | |
| (l >> 22) & 0x3f); | |
| } | |
| #else | |
| static void rfbi_print_timings(void) {} | |
| #endif | |
| static u32 extif_clk_period; | |
| static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) | |
| { | |
| int bus_tick = extif_clk_period * div; | |
| return (ps + bus_tick - 1) / bus_tick * bus_tick; | |
| } | |
| static int calc_reg_timing(struct rfbi_timings *t, int div) | |
| { | |
| t->clk_div = div; | |
| t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); | |
| t->we_on_time = round_to_extif_ticks(t->we_on_time, div); | |
| t->we_off_time = round_to_extif_ticks(t->we_off_time, div); | |
| t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); | |
| t->re_on_time = round_to_extif_ticks(t->re_on_time, div); | |
| t->re_off_time = round_to_extif_ticks(t->re_off_time, div); | |
| t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); | |
| t->access_time = round_to_extif_ticks(t->access_time, div); | |
| t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); | |
| t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); | |
| DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", | |
| t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); | |
| DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", | |
| t->we_on_time, t->we_off_time, t->re_cycle_time, | |
| t->we_cycle_time); | |
| DSSDBG("[reg]rdaccess %d cspulse %d\n", | |
| t->access_time, t->cs_pulse_width); | |
| return rfbi_convert_timings(t); | |
| } | |
| static int calc_extif_timings(struct rfbi_timings *t) | |
| { | |
| u32 max_clk_div; | |
| int div; | |
| rfbi_get_clk_info(&extif_clk_period, &max_clk_div); | |
| for (div = 1; div <= max_clk_div; div++) { | |
| if (calc_reg_timing(t, div) == 0) | |
| break; | |
| } | |
| if (div <= max_clk_div) | |
| return 0; | |
| DSSERR("can't setup timings\n"); | |
| return -1; | |
| } | |
| static void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) | |
| { | |
| int r; | |
| if (!t->converted) { | |
| r = calc_extif_timings(t); | |
| if (r < 0) | |
| DSSERR("Failed to calc timings\n"); | |
| } | |
| BUG_ON(!t->converted); | |
| rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); | |
| rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); | |
| /* TIMEGRANULARITY */ | |
| REG_FLD_MOD(RFBI_CONFIG(rfbi_module), | |
| (t->tim[2] ? 1 : 0), 4, 4); | |
| rfbi_print_timings(); | |
| } | |
| static int ps_to_rfbi_ticks(int time, int div) | |
| { | |
| unsigned long tick_ps; | |
| int ret; | |
| /* Calculate in picosecs to yield more exact results */ | |
| tick_ps = 1000000000 / (rfbi.l4_khz) * div; | |
| ret = (time + tick_ps - 1) / tick_ps; | |
| return ret; | |
| } | |
| static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) | |
| { | |
| *clk_period = 1000000000 / rfbi.l4_khz; | |
| *max_clk_div = 2; | |
| } | |
| static int rfbi_convert_timings(struct rfbi_timings *t) | |
| { | |
| u32 l; | |
| int reon, reoff, weon, weoff, cson, csoff, cs_pulse; | |
| int actim, recyc, wecyc; | |
| int div = t->clk_div; | |
| if (div <= 0 || div > 2) | |
| return -1; | |
| /* Make sure that after conversion it still holds that: | |
| * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, | |
| * csoff > cson, csoff >= max(weoff, reoff), actim > reon | |
| */ | |
| weon = ps_to_rfbi_ticks(t->we_on_time, div); | |
| weoff = ps_to_rfbi_ticks(t->we_off_time, div); | |
| if (weoff <= weon) | |
| weoff = weon + 1; | |
| if (weon > 0x0f) | |
| return -1; | |
| if (weoff > 0x3f) | |
| return -1; | |
| reon = ps_to_rfbi_ticks(t->re_on_time, div); | |
| reoff = ps_to_rfbi_ticks(t->re_off_time, div); | |
| if (reoff <= reon) | |
| reoff = reon + 1; | |
| if (reon > 0x0f) | |
| return -1; | |
| if (reoff > 0x3f) | |
| return -1; | |
| cson = ps_to_rfbi_ticks(t->cs_on_time, div); | |
| csoff = ps_to_rfbi_ticks(t->cs_off_time, div); | |
| if (csoff <= cson) | |
| csoff = cson + 1; | |
| if (csoff < max(weoff, reoff)) | |
| csoff = max(weoff, reoff); | |
| if (cson > 0x0f) | |
| return -1; | |
| if (csoff > 0x3f) | |
| return -1; | |
| l = cson; | |
| l |= csoff << 4; | |
| l |= weon << 10; | |
| l |= weoff << 14; | |
| l |= reon << 20; | |
| l |= reoff << 24; | |
| t->tim[0] = l; | |
| actim = ps_to_rfbi_ticks(t->access_time, div); | |
| if (actim <= reon) | |
| actim = reon + 1; | |
| if (actim > 0x3f) | |
| return -1; | |
| wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); | |
| if (wecyc < weoff) | |
| wecyc = weoff; | |
| if (wecyc > 0x3f) | |
| return -1; | |
| recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); | |
| if (recyc < reoff) | |
| recyc = reoff; | |
| if (recyc > 0x3f) | |
| return -1; | |
| cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); | |
| if (cs_pulse > 0x3f) | |
| return -1; | |
| l = wecyc; | |
| l |= recyc << 6; | |
| l |= cs_pulse << 12; | |
| l |= actim << 22; | |
| t->tim[1] = l; | |
| t->tim[2] = div - 1; | |
| t->converted = 1; | |
| return 0; | |
| } | |
| /* xxx FIX module selection missing */ | |
| static int rfbi_setup_te(enum omap_rfbi_te_mode mode, | |
| unsigned hs_pulse_time, unsigned vs_pulse_time, | |
| int hs_pol_inv, int vs_pol_inv, int extif_div) | |
| { | |
| int hs, vs; | |
| int min; | |
| u32 l; | |
| hs = ps_to_rfbi_ticks(hs_pulse_time, 1); | |
| vs = ps_to_rfbi_ticks(vs_pulse_time, 1); | |
| if (hs < 2) | |
| return -EDOM; | |
| if (mode == OMAP_DSS_RFBI_TE_MODE_2) | |
| min = 2; | |
| else /* OMAP_DSS_RFBI_TE_MODE_1 */ | |
| min = 4; | |
| if (vs < min) | |
| return -EDOM; | |
| if (vs == hs) | |
| return -EINVAL; | |
| rfbi.te_mode = mode; | |
| DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", | |
| mode, hs, vs, hs_pol_inv, vs_pol_inv); | |
| rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); | |
| rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); | |
| l = rfbi_read_reg(RFBI_CONFIG(0)); | |
| if (hs_pol_inv) | |
| l &= ~(1 << 21); | |
| else | |
| l |= 1 << 21; | |
| if (vs_pol_inv) | |
| l &= ~(1 << 20); | |
| else | |
| l |= 1 << 20; | |
| return 0; | |
| } | |
| /* xxx FIX module selection missing */ | |
| static int rfbi_enable_te(bool enable, unsigned line) | |
| { | |
| u32 l; | |
| DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); | |
| if (line > (1 << 11) - 1) | |
| return -EINVAL; | |
| l = rfbi_read_reg(RFBI_CONFIG(0)); | |
| l &= ~(0x3 << 2); | |
| if (enable) { | |
| rfbi.te_enabled = 1; | |
| l |= rfbi.te_mode << 2; | |
| } else | |
| rfbi.te_enabled = 0; | |
| rfbi_write_reg(RFBI_CONFIG(0), l); | |
| rfbi_write_reg(RFBI_LINE_NUMBER, line); | |
| return 0; | |
| } | |
| static int rfbi_configure_bus(int rfbi_module, int bpp, int lines) | |
| { | |
| u32 l; | |
| int cycle1 = 0, cycle2 = 0, cycle3 = 0; | |
| enum omap_rfbi_cycleformat cycleformat; | |
| enum omap_rfbi_datatype datatype; | |
| enum omap_rfbi_parallelmode parallelmode; | |
| switch (bpp) { | |
| case 12: | |
| datatype = OMAP_DSS_RFBI_DATATYPE_12; | |
| break; | |
| case 16: | |
| datatype = OMAP_DSS_RFBI_DATATYPE_16; | |
| break; | |
| case 18: | |
| datatype = OMAP_DSS_RFBI_DATATYPE_18; | |
| break; | |
| case 24: | |
| datatype = OMAP_DSS_RFBI_DATATYPE_24; | |
| break; | |
| default: | |
| BUG(); | |
| return 1; | |
| } | |
| rfbi.datatype = datatype; | |
| switch (lines) { | |
| case 8: | |
| parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; | |
| break; | |
| case 9: | |
| parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; | |
| break; | |
| case 12: | |
| parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; | |
| break; | |
| case 16: | |
| parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; | |
| break; | |
| default: | |
| BUG(); | |
| return 1; | |
| } | |
| rfbi.parallelmode = parallelmode; | |
| if ((bpp % lines) == 0) { | |
| switch (bpp / lines) { | |
| case 1: | |
| cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; | |
| break; | |
| case 2: | |
| cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; | |
| break; | |
| case 3: | |
| cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; | |
| break; | |
| default: | |
| BUG(); | |
| return 1; | |
| } | |
| } else if ((2 * bpp % lines) == 0) { | |
| if ((2 * bpp / lines) == 3) | |
| cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; | |
| else { | |
| BUG(); | |
| return 1; | |
| } | |
| } else { | |
| BUG(); | |
| return 1; | |
| } | |
| switch (cycleformat) { | |
| case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: | |
| cycle1 = lines; | |
| break; | |
| case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: | |
| cycle1 = lines; | |
| cycle2 = lines; | |
| break; | |
| case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: | |
| cycle1 = lines; | |
| cycle2 = lines; | |
| cycle3 = lines; | |
| break; | |
| case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: | |
| cycle1 = lines; | |
| cycle2 = (lines / 2) | ((lines / 2) << 16); | |
| cycle3 = (lines << 16); | |
| break; | |
| } | |
| REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ | |
| l = 0; | |
| l |= FLD_VAL(parallelmode, 1, 0); | |
| l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ | |
| l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ | |
| l |= FLD_VAL(datatype, 6, 5); | |
| /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ | |
| l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ | |
| l |= FLD_VAL(cycleformat, 10, 9); | |
| l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ | |
| l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ | |
| l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ | |
| l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ | |
| l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ | |
| l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ | |
| l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ | |
| rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); | |
| rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); | |
| rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); | |
| rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); | |
| l = rfbi_read_reg(RFBI_CONTROL); | |
| l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ | |
| l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ | |
| rfbi_write_reg(RFBI_CONTROL, l); | |
| DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", | |
| bpp, lines, cycle1, cycle2, cycle3); | |
| return 0; | |
| } | |
| static int rfbi_configure(struct omap_dss_device *dssdev) | |
| { | |
| return rfbi_configure_bus(dssdev->phy.rfbi.channel, rfbi.pixel_size, | |
| rfbi.data_lines); | |
| } | |
| static int rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *), | |
| void *data) | |
| { | |
| return rfbi_transfer_area(dssdev, callback, data); | |
| } | |
| static void rfbi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h) | |
| { | |
| rfbi.timings.x_res = w; | |
| rfbi.timings.y_res = h; | |
| } | |
| static void rfbi_set_pixel_size(struct omap_dss_device *dssdev, int pixel_size) | |
| { | |
| rfbi.pixel_size = pixel_size; | |
| } | |
| static void rfbi_set_data_lines(struct omap_dss_device *dssdev, int data_lines) | |
| { | |
| rfbi.data_lines = data_lines; | |
| } | |
| static void rfbi_set_interface_timings(struct omap_dss_device *dssdev, | |
| struct rfbi_timings *timings) | |
| { | |
| rfbi.intf_timings = *timings; | |
| } | |
| static void rfbi_dump_regs(struct seq_file *s) | |
| { | |
| #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r)) | |
| if (rfbi_runtime_get()) | |
| return; | |
| DUMPREG(RFBI_REVISION); | |
| DUMPREG(RFBI_SYSCONFIG); | |
| DUMPREG(RFBI_SYSSTATUS); | |
| DUMPREG(RFBI_CONTROL); | |
| DUMPREG(RFBI_PIXEL_CNT); | |
| DUMPREG(RFBI_LINE_NUMBER); | |
| DUMPREG(RFBI_CMD); | |
| DUMPREG(RFBI_PARAM); | |
| DUMPREG(RFBI_DATA); | |
| DUMPREG(RFBI_READ); | |
| DUMPREG(RFBI_STATUS); | |
| DUMPREG(RFBI_CONFIG(0)); | |
| DUMPREG(RFBI_ONOFF_TIME(0)); | |
| DUMPREG(RFBI_CYCLE_TIME(0)); | |
| DUMPREG(RFBI_DATA_CYCLE1(0)); | |
| DUMPREG(RFBI_DATA_CYCLE2(0)); | |
| DUMPREG(RFBI_DATA_CYCLE3(0)); | |
| DUMPREG(RFBI_CONFIG(1)); | |
| DUMPREG(RFBI_ONOFF_TIME(1)); | |
| DUMPREG(RFBI_CYCLE_TIME(1)); | |
| DUMPREG(RFBI_DATA_CYCLE1(1)); | |
| DUMPREG(RFBI_DATA_CYCLE2(1)); | |
| DUMPREG(RFBI_DATA_CYCLE3(1)); | |
| DUMPREG(RFBI_VSYNC_WIDTH); | |
| DUMPREG(RFBI_HSYNC_WIDTH); | |
| rfbi_runtime_put(); | |
| #undef DUMPREG | |
| } | |
| static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev) | |
| { | |
| struct omap_overlay_manager *mgr = rfbi.output.manager; | |
| struct dss_lcd_mgr_config mgr_config; | |
| mgr_config.io_pad_mode = DSS_IO_PAD_MODE_RFBI; | |
| mgr_config.stallmode = true; | |
| /* Do we need fifohandcheck for RFBI? */ | |
| mgr_config.fifohandcheck = false; | |
| mgr_config.video_port_width = rfbi.pixel_size; | |
| mgr_config.lcden_sig_polarity = 0; | |
| dss_mgr_set_lcd_config(mgr, &mgr_config); | |
| /* | |
| * Set rfbi.timings with default values, the x_res and y_res fields | |
| * are expected to be already configured by the panel driver via | |
| * omapdss_rfbi_set_size() | |
| */ | |
| rfbi.timings.hsw = 1; | |
| rfbi.timings.hfp = 1; | |
| rfbi.timings.hbp = 1; | |
| rfbi.timings.vsw = 1; | |
| rfbi.timings.vfp = 0; | |
| rfbi.timings.vbp = 0; | |
| rfbi.timings.interlace = false; | |
| rfbi.timings.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH; | |
| rfbi.timings.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH; | |
| rfbi.timings.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; | |
| rfbi.timings.de_level = OMAPDSS_SIG_ACTIVE_HIGH; | |
| rfbi.timings.sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE; | |
| dss_mgr_set_timings(mgr, &rfbi.timings); | |
| } | |
| static int rfbi_display_enable(struct omap_dss_device *dssdev) | |
| { | |
| struct omap_dss_device *out = &rfbi.output; | |
| int r; | |
| if (out->manager == NULL) { | |
| DSSERR("failed to enable display: no output/manager\n"); | |
| return -ENODEV; | |
| } | |
| r = rfbi_runtime_get(); | |
| if (r) | |
| return r; | |
| r = dss_mgr_register_framedone_handler(out->manager, | |
| framedone_callback, NULL); | |
| if (r) { | |
| DSSERR("can't get FRAMEDONE irq\n"); | |
| goto err1; | |
| } | |
| rfbi_config_lcd_manager(dssdev); | |
| rfbi_configure_bus(dssdev->phy.rfbi.channel, rfbi.pixel_size, | |
| rfbi.data_lines); | |
| rfbi_set_timings(dssdev->phy.rfbi.channel, &rfbi.intf_timings); | |
| return 0; | |
| err1: | |
| rfbi_runtime_put(); | |
| return r; | |
| } | |
| static void rfbi_display_disable(struct omap_dss_device *dssdev) | |
| { | |
| struct omap_dss_device *out = &rfbi.output; | |
| dss_mgr_unregister_framedone_handler(out->manager, | |
| framedone_callback, NULL); | |
| rfbi_runtime_put(); | |
| } | |
| static int rfbi_init_display(struct omap_dss_device *dssdev) | |
| { | |
| rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev; | |
| return 0; | |
| } | |
| static void rfbi_init_output(struct platform_device *pdev) | |
| { | |
| struct omap_dss_device *out = &rfbi.output; | |
| out->dev = &pdev->dev; | |
| out->id = OMAP_DSS_OUTPUT_DBI; | |
| out->output_type = OMAP_DISPLAY_TYPE_DBI; | |
| out->name = "rfbi.0"; | |
| out->dispc_channel = OMAP_DSS_CHANNEL_LCD; | |
| out->owner = THIS_MODULE; | |
| omapdss_register_output(out); | |
| } | |
| static void rfbi_uninit_output(struct platform_device *pdev) | |
| { | |
| struct omap_dss_device *out = &rfbi.output; | |
| omapdss_unregister_output(out); | |
| } | |
| /* RFBI HW IP initialisation */ | |
| static int rfbi_bind(struct device *dev, struct device *master, void *data) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| u32 rev; | |
| struct resource *rfbi_mem; | |
| struct clk *clk; | |
| int r; | |
| rfbi.pdev = pdev; | |
| sema_init(&rfbi.bus_lock, 1); | |
| rfbi_mem = platform_get_resource(rfbi.pdev, IORESOURCE_MEM, 0); | |
| if (!rfbi_mem) { | |
| DSSERR("can't get IORESOURCE_MEM RFBI\n"); | |
| return -EINVAL; | |
| } | |
| rfbi.base = devm_ioremap(&pdev->dev, rfbi_mem->start, | |
| resource_size(rfbi_mem)); | |
| if (!rfbi.base) { | |
| DSSERR("can't ioremap RFBI\n"); | |
| return -ENOMEM; | |
| } | |
| clk = clk_get(&pdev->dev, "ick"); | |
| if (IS_ERR(clk)) { | |
| DSSERR("can't get ick\n"); | |
| return PTR_ERR(clk); | |
| } | |
| rfbi.l4_khz = clk_get_rate(clk) / 1000; | |
| clk_put(clk); | |
| pm_runtime_enable(&pdev->dev); | |
| r = rfbi_runtime_get(); | |
| if (r) | |
| goto err_runtime_get; | |
| msleep(10); | |
| rev = rfbi_read_reg(RFBI_REVISION); | |
| dev_dbg(&pdev->dev, "OMAP RFBI rev %d.%d\n", | |
| FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); | |
| rfbi_runtime_put(); | |
| dss_debugfs_create_file("rfbi", rfbi_dump_regs); | |
| rfbi_init_output(pdev); | |
| return 0; | |
| err_runtime_get: | |
| pm_runtime_disable(&pdev->dev); | |
| return r; | |
| } | |
| static void rfbi_unbind(struct device *dev, struct device *master, void *data) | |
| { | |
| struct platform_device *pdev = to_platform_device(dev); | |
| rfbi_uninit_output(pdev); | |
| pm_runtime_disable(&pdev->dev); | |
| return 0; | |
| } | |
| static const struct component_ops rfbi_component_ops = { | |
| .bind = rfbi_bind, | |
| .unbind = rfbi_unbind, | |
| }; | |
| static int rfbi_probe(struct platform_device *pdev) | |
| { | |
| return component_add(&pdev->dev, &rfbi_component_ops); | |
| } | |
| static int rfbi_remove(struct platform_device *pdev) | |
| { | |
| component_del(&pdev->dev, &rfbi_component_ops); | |
| return 0; | |
| } | |
| static int rfbi_runtime_suspend(struct device *dev) | |
| { | |
| dispc_runtime_put(); | |
| return 0; | |
| } | |
| static int rfbi_runtime_resume(struct device *dev) | |
| { | |
| int r; | |
| r = dispc_runtime_get(); | |
| if (r < 0) | |
| return r; | |
| return 0; | |
| } | |
| static const struct dev_pm_ops rfbi_pm_ops = { | |
| .runtime_suspend = rfbi_runtime_suspend, | |
| .runtime_resume = rfbi_runtime_resume, | |
| }; | |
| static struct platform_driver omap_rfbihw_driver = { | |
| .probe = rfbi_probe, | |
| .remove = rfbi_remove, | |
| .driver = { | |
| .name = "omapdss_rfbi", | |
| .pm = &rfbi_pm_ops, | |
| .suppress_bind_attrs = true, | |
| }, | |
| }; | |
| int __init rfbi_init_platform_driver(void) | |
| { | |
| return platform_driver_register(&omap_rfbihw_driver); | |
| } | |
| void rfbi_uninit_platform_driver(void) | |
| { | |
| platform_driver_unregister(&omap_rfbihw_driver); | |
| } |