| /* | |
| * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved. | |
| * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public | |
| * License as published by the Free Software Foundation; | |
| * either version 2, or (at your option) any later version. | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even | |
| * the implied warranty of MERCHANTABILITY or FITNESS FOR | |
| * A PARTICULAR PURPOSE.See the GNU General Public License | |
| * for more details. | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., | |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | |
| */ | |
| #include <linux/via-core.h> | |
| #include <linux/via_i2c.h> | |
| #include "global.h" | |
| static void tmds_register_write(int index, u8 data); | |
| static int tmds_register_read(int index); | |
| static int tmds_register_read_bytes(int index, u8 *buff, int buff_len); | |
| static void dvi_get_panel_size_from_DDCv1( | |
| struct tmds_chip_information *tmds_chip, | |
| struct tmds_setting_information *tmds_setting); | |
| static int viafb_dvi_query_EDID(void); | |
| static inline bool check_tmds_chip(int device_id_subaddr, int device_id) | |
| { | |
| return tmds_register_read(device_id_subaddr) == device_id; | |
| } | |
| void viafb_init_dvi_size(struct tmds_chip_information *tmds_chip, | |
| struct tmds_setting_information *tmds_setting) | |
| { | |
| DEBUG_MSG(KERN_INFO "viafb_init_dvi_size()\n"); | |
| viafb_dvi_sense(); | |
| if (viafb_dvi_query_EDID() == 1) | |
| dvi_get_panel_size_from_DDCv1(tmds_chip, tmds_setting); | |
| return; | |
| } | |
| bool viafb_tmds_trasmitter_identify(void) | |
| { | |
| unsigned char sr2a = 0, sr1e = 0, sr3e = 0; | |
| /* Turn on ouputting pad */ | |
| switch (viaparinfo->chip_info->gfx_chip_name) { | |
| case UNICHROME_K8M890: | |
| /*=* DFP Low Pad on *=*/ | |
| sr2a = viafb_read_reg(VIASR, SR2A); | |
| viafb_write_reg_mask(SR2A, VIASR, 0x03, BIT0 + BIT1); | |
| break; | |
| case UNICHROME_P4M900: | |
| case UNICHROME_P4M890: | |
| /* DFP Low Pad on */ | |
| sr2a = viafb_read_reg(VIASR, SR2A); | |
| viafb_write_reg_mask(SR2A, VIASR, 0x03, BIT0 + BIT1); | |
| /* DVP0 Pad on */ | |
| sr1e = viafb_read_reg(VIASR, SR1E); | |
| viafb_write_reg_mask(SR1E, VIASR, 0xC0, BIT6 + BIT7); | |
| break; | |
| default: | |
| /* DVP0/DVP1 Pad on */ | |
| sr1e = viafb_read_reg(VIASR, SR1E); | |
| viafb_write_reg_mask(SR1E, VIASR, 0xF0, BIT4 + | |
| BIT5 + BIT6 + BIT7); | |
| /* SR3E[1]Multi-function selection: | |
| 0 = Emulate I2C and DDC bus by GPIO2/3/4. */ | |
| sr3e = viafb_read_reg(VIASR, SR3E); | |
| viafb_write_reg_mask(SR3E, VIASR, 0x0, BIT5); | |
| break; | |
| } | |
| /* Check for VT1632: */ | |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = VT1632_TMDS; | |
| viaparinfo->chip_info-> | |
| tmds_chip_info.tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR; | |
| viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_31; | |
| if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID)) { | |
| /* | |
| * Currently only support 12bits,dual edge,add 24bits mode later | |
| */ | |
| tmds_register_write(0x08, 0x3b); | |
| DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n"); | |
| DEBUG_MSG(KERN_INFO "\n %2d", | |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_name); | |
| DEBUG_MSG(KERN_INFO "\n %2d", | |
| viaparinfo->chip_info->tmds_chip_info.i2c_port); | |
| return true; | |
| } else { | |
| viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_2C; | |
| if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID)) { | |
| tmds_register_write(0x08, 0x3b); | |
| DEBUG_MSG(KERN_INFO "\n VT1632 TMDS ! \n"); | |
| DEBUG_MSG(KERN_INFO "\n %2d", | |
| viaparinfo->chip_info-> | |
| tmds_chip_info.tmds_chip_name); | |
| DEBUG_MSG(KERN_INFO "\n %2d", | |
| viaparinfo->chip_info-> | |
| tmds_chip_info.i2c_port); | |
| return true; | |
| } | |
| } | |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = INTEGRATED_TMDS; | |
| if ((viaparinfo->chip_info->gfx_chip_name == UNICHROME_CX700) && | |
| ((viafb_display_hardware_layout == HW_LAYOUT_DVI_ONLY) || | |
| (viafb_display_hardware_layout == HW_LAYOUT_LCD_DVI))) { | |
| DEBUG_MSG(KERN_INFO "\n Integrated TMDS ! \n"); | |
| return true; | |
| } | |
| switch (viaparinfo->chip_info->gfx_chip_name) { | |
| case UNICHROME_K8M890: | |
| viafb_write_reg(SR2A, VIASR, sr2a); | |
| break; | |
| case UNICHROME_P4M900: | |
| case UNICHROME_P4M890: | |
| viafb_write_reg(SR2A, VIASR, sr2a); | |
| viafb_write_reg(SR1E, VIASR, sr1e); | |
| break; | |
| default: | |
| viafb_write_reg(SR1E, VIASR, sr1e); | |
| viafb_write_reg(SR3E, VIASR, sr3e); | |
| break; | |
| } | |
| viaparinfo->chip_info-> | |
| tmds_chip_info.tmds_chip_name = NON_TMDS_TRANSMITTER; | |
| viaparinfo->chip_info->tmds_chip_info. | |
| tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR; | |
| return false; | |
| } | |
| static void tmds_register_write(int index, u8 data) | |
| { | |
| viafb_i2c_writebyte(viaparinfo->chip_info->tmds_chip_info.i2c_port, | |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr, | |
| index, data); | |
| } | |
| static int tmds_register_read(int index) | |
| { | |
| u8 data; | |
| viafb_i2c_readbyte(viaparinfo->chip_info->tmds_chip_info.i2c_port, | |
| (u8) viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr, | |
| (u8) index, &data); | |
| return data; | |
| } | |
| static int tmds_register_read_bytes(int index, u8 *buff, int buff_len) | |
| { | |
| viafb_i2c_readbytes(viaparinfo->chip_info->tmds_chip_info.i2c_port, | |
| (u8) viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr, | |
| (u8) index, buff, buff_len); | |
| return 0; | |
| } | |
| /* DVI Set Mode */ | |
| void viafb_dvi_set_mode(const struct fb_var_screeninfo *var, | |
| u16 cxres, u16 cyres, int iga) | |
| { | |
| struct fb_var_screeninfo dvi_var = *var; | |
| const struct fb_videomode *rb_mode; | |
| int maxPixelClock; | |
| maxPixelClock = viaparinfo->shared->tmds_setting_info.max_pixel_clock; | |
| if (maxPixelClock && PICOS2KHZ(var->pixclock) / 1000 > maxPixelClock) { | |
| rb_mode = viafb_get_best_rb_mode(var->xres, var->yres, 60); | |
| if (rb_mode) | |
| viafb_fill_var_timing_info(&dvi_var, rb_mode); | |
| } | |
| viafb_fill_crtc_timing(&dvi_var, cxres, cyres, iga); | |
| } | |
| /* Sense DVI Connector */ | |
| int viafb_dvi_sense(void) | |
| { | |
| u8 RegSR1E = 0, RegSR3E = 0, RegCR6B = 0, RegCR91 = 0, | |
| RegCR93 = 0, RegCR9B = 0, data; | |
| int ret = false; | |
| DEBUG_MSG(KERN_INFO "viafb_dvi_sense!!\n"); | |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) { | |
| /* DI1 Pad on */ | |
| RegSR1E = viafb_read_reg(VIASR, SR1E); | |
| viafb_write_reg(SR1E, VIASR, RegSR1E | 0x30); | |
| /* CR6B[0]VCK Input Selection: 1 = External clock. */ | |
| RegCR6B = viafb_read_reg(VIACR, CR6B); | |
| viafb_write_reg(CR6B, VIACR, RegCR6B | 0x08); | |
| /* CR91[4] VDD On [3] Data On [2] VEE On [1] Back Light Off | |
| [0] Software Control Power Sequence */ | |
| RegCR91 = viafb_read_reg(VIACR, CR91); | |
| viafb_write_reg(CR91, VIACR, 0x1D); | |
| /* CR93[7] DI1 Data Source Selection: 1 = DSP2. | |
| CR93[5] DI1 Clock Source: 1 = internal. | |
| CR93[4] DI1 Clock Polarity. | |
| CR93[3:1] DI1 Clock Adjust. CR93[0] DI1 enable */ | |
| RegCR93 = viafb_read_reg(VIACR, CR93); | |
| viafb_write_reg(CR93, VIACR, 0x01); | |
| } else { | |
| /* DVP0/DVP1 Pad on */ | |
| RegSR1E = viafb_read_reg(VIASR, SR1E); | |
| viafb_write_reg(SR1E, VIASR, RegSR1E | 0xF0); | |
| /* SR3E[1]Multi-function selection: | |
| 0 = Emulate I2C and DDC bus by GPIO2/3/4. */ | |
| RegSR3E = viafb_read_reg(VIASR, SR3E); | |
| viafb_write_reg(SR3E, VIASR, RegSR3E & (~0x20)); | |
| /* CR91[4] VDD On [3] Data On [2] VEE On [1] Back Light Off | |
| [0] Software Control Power Sequence */ | |
| RegCR91 = viafb_read_reg(VIACR, CR91); | |
| viafb_write_reg(CR91, VIACR, 0x1D); | |
| /*CR9B[4] DVP1 Data Source Selection: 1 = From secondary | |
| display.CR9B[2:0] DVP1 Clock Adjust */ | |
| RegCR9B = viafb_read_reg(VIACR, CR9B); | |
| viafb_write_reg(CR9B, VIACR, 0x01); | |
| } | |
| data = (u8) tmds_register_read(0x09); | |
| if (data & 0x04) | |
| ret = true; | |
| if (ret == false) { | |
| if (viafb_dvi_query_EDID()) | |
| ret = true; | |
| } | |
| /* Restore status */ | |
| viafb_write_reg(SR1E, VIASR, RegSR1E); | |
| viafb_write_reg(CR91, VIACR, RegCR91); | |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) { | |
| viafb_write_reg(CR6B, VIACR, RegCR6B); | |
| viafb_write_reg(CR93, VIACR, RegCR93); | |
| } else { | |
| viafb_write_reg(SR3E, VIASR, RegSR3E); | |
| viafb_write_reg(CR9B, VIACR, RegCR9B); | |
| } | |
| return ret; | |
| } | |
| /* Query Flat Panel's EDID Table Version Through DVI Connector */ | |
| static int viafb_dvi_query_EDID(void) | |
| { | |
| u8 data0, data1; | |
| int restore; | |
| DEBUG_MSG(KERN_INFO "viafb_dvi_query_EDID!!\n"); | |
| restore = viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr; | |
| viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr = 0xA0; | |
| data0 = (u8) tmds_register_read(0x00); | |
| data1 = (u8) tmds_register_read(0x01); | |
| if ((data0 == 0) && (data1 == 0xFF)) { | |
| viaparinfo->chip_info-> | |
| tmds_chip_info.tmds_chip_slave_addr = restore; | |
| return EDID_VERSION_1; /* Found EDID1 Table */ | |
| } | |
| return false; | |
| } | |
| /* Get Panel Size Using EDID1 Table */ | |
| static void dvi_get_panel_size_from_DDCv1( | |
| struct tmds_chip_information *tmds_chip, | |
| struct tmds_setting_information *tmds_setting) | |
| { | |
| int i, restore; | |
| unsigned char EDID_DATA[18]; | |
| DEBUG_MSG(KERN_INFO "\n dvi_get_panel_size_from_DDCv1 \n"); | |
| restore = tmds_chip->tmds_chip_slave_addr; | |
| tmds_chip->tmds_chip_slave_addr = 0xA0; | |
| for (i = 0x25; i < 0x6D; i++) { | |
| switch (i) { | |
| case 0x36: | |
| case 0x48: | |
| case 0x5A: | |
| case 0x6C: | |
| tmds_register_read_bytes(i, EDID_DATA, 10); | |
| if (!(EDID_DATA[0] || EDID_DATA[1])) { | |
| /* The first two byte must be zero. */ | |
| if (EDID_DATA[3] == 0xFD) { | |
| /* To get max pixel clock. */ | |
| tmds_setting->max_pixel_clock = | |
| EDID_DATA[9] * 10; | |
| } | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| DEBUG_MSG(KERN_INFO "DVI max pixelclock = %d\n", | |
| tmds_setting->max_pixel_clock); | |
| tmds_chip->tmds_chip_slave_addr = restore; | |
| } | |
| /* If Disable DVI, turn off pad */ | |
| void viafb_dvi_disable(void) | |
| { | |
| if (viaparinfo->chip_info-> | |
| tmds_chip_info.output_interface == INTERFACE_TMDS) | |
| /* Turn off TMDS power. */ | |
| viafb_write_reg(CRD2, VIACR, | |
| viafb_read_reg(VIACR, CRD2) | 0x08); | |
| } | |
| static void dvi_patch_skew_dvp0(void) | |
| { | |
| /* Reset data driving first: */ | |
| viafb_write_reg_mask(SR1B, VIASR, 0, BIT1); | |
| viafb_write_reg_mask(SR2A, VIASR, 0, BIT4); | |
| switch (viaparinfo->chip_info->gfx_chip_name) { | |
| case UNICHROME_P4M890: | |
| { | |
| if ((viaparinfo->tmds_setting_info->h_active == 1600) && | |
| (viaparinfo->tmds_setting_info->v_active == | |
| 1200)) | |
| viafb_write_reg_mask(CR96, VIACR, 0x03, | |
| BIT0 + BIT1 + BIT2); | |
| else | |
| viafb_write_reg_mask(CR96, VIACR, 0x07, | |
| BIT0 + BIT1 + BIT2); | |
| break; | |
| } | |
| case UNICHROME_P4M900: | |
| { | |
| viafb_write_reg_mask(CR96, VIACR, 0x07, | |
| BIT0 + BIT1 + BIT2 + BIT3); | |
| viafb_write_reg_mask(SR1B, VIASR, 0x02, BIT1); | |
| viafb_write_reg_mask(SR2A, VIASR, 0x10, BIT4); | |
| break; | |
| } | |
| default: | |
| { | |
| break; | |
| } | |
| } | |
| } | |
| static void dvi_patch_skew_dvp_low(void) | |
| { | |
| switch (viaparinfo->chip_info->gfx_chip_name) { | |
| case UNICHROME_K8M890: | |
| { | |
| viafb_write_reg_mask(CR99, VIACR, 0x03, BIT0 + BIT1); | |
| break; | |
| } | |
| case UNICHROME_P4M900: | |
| { | |
| viafb_write_reg_mask(CR99, VIACR, 0x08, | |
| BIT0 + BIT1 + BIT2 + BIT3); | |
| break; | |
| } | |
| case UNICHROME_P4M890: | |
| { | |
| viafb_write_reg_mask(CR99, VIACR, 0x0F, | |
| BIT0 + BIT1 + BIT2 + BIT3); | |
| break; | |
| } | |
| default: | |
| { | |
| break; | |
| } | |
| } | |
| } | |
| /* If Enable DVI, turn off pad */ | |
| void viafb_dvi_enable(void) | |
| { | |
| u8 data; | |
| switch (viaparinfo->chip_info->tmds_chip_info.output_interface) { | |
| case INTERFACE_DVP0: | |
| viafb_write_reg_mask(CR6B, VIACR, 0x01, BIT0); | |
| viafb_write_reg_mask(CR6C, VIACR, 0x21, BIT0 + BIT5); | |
| dvi_patch_skew_dvp0(); | |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) | |
| tmds_register_write(0x88, 0x3b); | |
| else | |
| /*clear CR91[5] to direct on display period | |
| in the secondary diplay path */ | |
| via_write_reg_mask(VIACR, 0x91, 0x00, 0x20); | |
| break; | |
| case INTERFACE_DVP1: | |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) | |
| viafb_write_reg_mask(CR93, VIACR, 0x21, BIT0 + BIT5); | |
| /*fix dvi cann't be enabled with MB VT5718C4 - Al Zhang */ | |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) | |
| tmds_register_write(0x88, 0x3b); | |
| else | |
| /*clear CR91[5] to direct on display period | |
| in the secondary diplay path */ | |
| via_write_reg_mask(VIACR, 0x91, 0x00, 0x20); | |
| /*fix DVI cannot enable on EPIA-M board */ | |
| if (viafb_platform_epia_dvi == 1) { | |
| viafb_write_reg_mask(CR91, VIACR, 0x1f, 0x1f); | |
| viafb_write_reg_mask(CR88, VIACR, 0x00, BIT6 + BIT0); | |
| if (viafb_bus_width == 24) { | |
| if (viafb_device_lcd_dualedge == 1) | |
| data = 0x3F; | |
| else | |
| data = 0x37; | |
| viafb_i2c_writebyte(viaparinfo->chip_info-> | |
| tmds_chip_info.i2c_port, | |
| viaparinfo->chip_info-> | |
| tmds_chip_info.tmds_chip_slave_addr, | |
| 0x08, data); | |
| } | |
| } | |
| break; | |
| case INTERFACE_DFP_HIGH: | |
| if (viaparinfo->chip_info->gfx_chip_name != UNICHROME_CLE266) | |
| via_write_reg_mask(VIACR, CR97, 0x03, 0x03); | |
| via_write_reg_mask(VIACR, 0x91, 0x00, 0x20); | |
| break; | |
| case INTERFACE_DFP_LOW: | |
| if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) | |
| break; | |
| dvi_patch_skew_dvp_low(); | |
| via_write_reg_mask(VIACR, 0x91, 0x00, 0x20); | |
| break; | |
| case INTERFACE_TMDS: | |
| /* Turn on Display period in the panel path. */ | |
| viafb_write_reg_mask(CR91, VIACR, 0, BIT7); | |
| /* Turn on TMDS power. */ | |
| viafb_write_reg_mask(CRD2, VIACR, 0, BIT3); | |
| break; | |
| } | |
| if (viaparinfo->tmds_setting_info->iga_path == IGA2) { | |
| /* Disable LCD Scaling */ | |
| viafb_write_reg_mask(CR79, VIACR, 0x00, BIT0); | |
| } | |
| } |