| /* | |
| * Virtio memory mapped device driver | |
| * | |
| * Copyright 2011-2014, ARM Ltd. | |
| * | |
| * This module allows virtio devices to be used over a virtual, memory mapped | |
| * platform device. | |
| * | |
| * The guest device(s) may be instantiated in one of three equivalent ways: | |
| * | |
| * 1. Static platform device in board's code, eg.: | |
| * | |
| * static struct platform_device v2m_virtio_device = { | |
| * .name = "virtio-mmio", | |
| * .id = -1, | |
| * .num_resources = 2, | |
| * .resource = (struct resource []) { | |
| * { | |
| * .start = 0x1001e000, | |
| * .end = 0x1001e0ff, | |
| * .flags = IORESOURCE_MEM, | |
| * }, { | |
| * .start = 42 + 32, | |
| * .end = 42 + 32, | |
| * .flags = IORESOURCE_IRQ, | |
| * }, | |
| * } | |
| * }; | |
| * | |
| * 2. Device Tree node, eg.: | |
| * | |
| * virtio_block@1e000 { | |
| * compatible = "virtio,mmio"; | |
| * reg = <0x1e000 0x100>; | |
| * interrupts = <42>; | |
| * } | |
| * | |
| * 3. Kernel module (or command line) parameter. Can be used more than once - | |
| * one device will be created for each one. Syntax: | |
| * | |
| * [virtio_mmio.]device=<size>@<baseaddr>:<irq>[:<id>] | |
| * where: | |
| * <size> := size (can use standard suffixes like K, M or G) | |
| * <baseaddr> := physical base address | |
| * <irq> := interrupt number (as passed to request_irq()) | |
| * <id> := (optional) platform device id | |
| * eg.: | |
| * virtio_mmio.device=0x100@0x100b0000:48 \ | |
| * virtio_mmio.device=1K@0x1001e000:74 | |
| * | |
| * | |
| * | |
| * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007 | |
| * | |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. | |
| * See the COPYING file in the top-level directory. | |
| */ | |
| #define pr_fmt(fmt) "virtio-mmio: " fmt | |
| #include <linux/acpi.h> | |
| #include <linux/highmem.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/virtio.h> | |
| #include <linux/virtio_config.h> | |
| #include <linux/virtio_mmio.h> | |
| #include <linux/virtio_ring.h> | |
| /* The alignment to use between consumer and producer parts of vring. | |
| * Currently hardcoded to the page size. */ | |
| #define VIRTIO_MMIO_VRING_ALIGN PAGE_SIZE | |
| #define to_virtio_mmio_device(_plat_dev) \ | |
| container_of(_plat_dev, struct virtio_mmio_device, vdev) | |
| struct virtio_mmio_device { | |
| struct virtio_device vdev; | |
| struct platform_device *pdev; | |
| void __iomem *base; | |
| unsigned long version; | |
| /* a list of queues so we can dispatch IRQs */ | |
| spinlock_t lock; | |
| struct list_head virtqueues; | |
| }; | |
| struct virtio_mmio_vq_info { | |
| /* the actual virtqueue */ | |
| struct virtqueue *vq; | |
| /* the list node for the virtqueues list */ | |
| struct list_head node; | |
| }; | |
| /* Configuration interface */ | |
| static u64 vm_get_features(struct virtio_device *vdev) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| u64 features; | |
| writel(1, vm_dev->base + VIRTIO_MMIO_DEVICE_FEATURES_SEL); | |
| features = readl(vm_dev->base + VIRTIO_MMIO_DEVICE_FEATURES); | |
| features <<= 32; | |
| writel(0, vm_dev->base + VIRTIO_MMIO_DEVICE_FEATURES_SEL); | |
| features |= readl(vm_dev->base + VIRTIO_MMIO_DEVICE_FEATURES); | |
| return features; | |
| } | |
| static int vm_finalize_features(struct virtio_device *vdev) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| /* Give virtio_ring a chance to accept features. */ | |
| vring_transport_features(vdev); | |
| /* Make sure there is are no mixed devices */ | |
| if (vm_dev->version == 2 && | |
| !__virtio_test_bit(vdev, VIRTIO_F_VERSION_1)) { | |
| dev_err(&vdev->dev, "New virtio-mmio devices (version 2) must provide VIRTIO_F_VERSION_1 feature!\n"); | |
| return -EINVAL; | |
| } | |
| writel(1, vm_dev->base + VIRTIO_MMIO_DRIVER_FEATURES_SEL); | |
| writel((u32)(vdev->features >> 32), | |
| vm_dev->base + VIRTIO_MMIO_DRIVER_FEATURES); | |
| writel(0, vm_dev->base + VIRTIO_MMIO_DRIVER_FEATURES_SEL); | |
| writel((u32)vdev->features, | |
| vm_dev->base + VIRTIO_MMIO_DRIVER_FEATURES); | |
| return 0; | |
| } | |
| static void vm_get(struct virtio_device *vdev, unsigned offset, | |
| void *buf, unsigned len) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| void __iomem *base = vm_dev->base + VIRTIO_MMIO_CONFIG; | |
| u8 b; | |
| __le16 w; | |
| __le32 l; | |
| if (vm_dev->version == 1) { | |
| u8 *ptr = buf; | |
| int i; | |
| for (i = 0; i < len; i++) | |
| ptr[i] = readb(base + offset + i); | |
| return; | |
| } | |
| switch (len) { | |
| case 1: | |
| b = readb(base + offset); | |
| memcpy(buf, &b, sizeof b); | |
| break; | |
| case 2: | |
| w = cpu_to_le16(readw(base + offset)); | |
| memcpy(buf, &w, sizeof w); | |
| break; | |
| case 4: | |
| l = cpu_to_le32(readl(base + offset)); | |
| memcpy(buf, &l, sizeof l); | |
| break; | |
| case 8: | |
| l = cpu_to_le32(readl(base + offset)); | |
| memcpy(buf, &l, sizeof l); | |
| l = cpu_to_le32(ioread32(base + offset + sizeof l)); | |
| memcpy(buf + sizeof l, &l, sizeof l); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| static void vm_set(struct virtio_device *vdev, unsigned offset, | |
| const void *buf, unsigned len) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| void __iomem *base = vm_dev->base + VIRTIO_MMIO_CONFIG; | |
| u8 b; | |
| __le16 w; | |
| __le32 l; | |
| if (vm_dev->version == 1) { | |
| const u8 *ptr = buf; | |
| int i; | |
| for (i = 0; i < len; i++) | |
| writeb(ptr[i], base + offset + i); | |
| return; | |
| } | |
| switch (len) { | |
| case 1: | |
| memcpy(&b, buf, sizeof b); | |
| writeb(b, base + offset); | |
| break; | |
| case 2: | |
| memcpy(&w, buf, sizeof w); | |
| writew(le16_to_cpu(w), base + offset); | |
| break; | |
| case 4: | |
| memcpy(&l, buf, sizeof l); | |
| writel(le32_to_cpu(l), base + offset); | |
| break; | |
| case 8: | |
| memcpy(&l, buf, sizeof l); | |
| writel(le32_to_cpu(l), base + offset); | |
| memcpy(&l, buf + sizeof l, sizeof l); | |
| writel(le32_to_cpu(l), base + offset + sizeof l); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| static u32 vm_generation(struct virtio_device *vdev) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| if (vm_dev->version == 1) | |
| return 0; | |
| else | |
| return readl(vm_dev->base + VIRTIO_MMIO_CONFIG_GENERATION); | |
| } | |
| static u8 vm_get_status(struct virtio_device *vdev) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| return readl(vm_dev->base + VIRTIO_MMIO_STATUS) & 0xff; | |
| } | |
| static void vm_set_status(struct virtio_device *vdev, u8 status) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| /* We should never be setting status to 0. */ | |
| BUG_ON(status == 0); | |
| writel(status, vm_dev->base + VIRTIO_MMIO_STATUS); | |
| } | |
| static void vm_reset(struct virtio_device *vdev) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| /* 0 status means a reset. */ | |
| writel(0, vm_dev->base + VIRTIO_MMIO_STATUS); | |
| } | |
| /* Transport interface */ | |
| /* the notify function used when creating a virt queue */ | |
| static bool vm_notify(struct virtqueue *vq) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev); | |
| /* We write the queue's selector into the notification register to | |
| * signal the other end */ | |
| writel(vq->index, vm_dev->base + VIRTIO_MMIO_QUEUE_NOTIFY); | |
| return true; | |
| } | |
| /* Notify all virtqueues on an interrupt. */ | |
| static irqreturn_t vm_interrupt(int irq, void *opaque) | |
| { | |
| struct virtio_mmio_device *vm_dev = opaque; | |
| struct virtio_mmio_vq_info *info; | |
| unsigned long status; | |
| unsigned long flags; | |
| irqreturn_t ret = IRQ_NONE; | |
| /* Read and acknowledge interrupts */ | |
| status = readl(vm_dev->base + VIRTIO_MMIO_INTERRUPT_STATUS); | |
| writel(status, vm_dev->base + VIRTIO_MMIO_INTERRUPT_ACK); | |
| if (unlikely(status & VIRTIO_MMIO_INT_CONFIG)) { | |
| virtio_config_changed(&vm_dev->vdev); | |
| ret = IRQ_HANDLED; | |
| } | |
| if (likely(status & VIRTIO_MMIO_INT_VRING)) { | |
| spin_lock_irqsave(&vm_dev->lock, flags); | |
| list_for_each_entry(info, &vm_dev->virtqueues, node) | |
| ret |= vring_interrupt(irq, info->vq); | |
| spin_unlock_irqrestore(&vm_dev->lock, flags); | |
| } | |
| return ret; | |
| } | |
| static void vm_del_vq(struct virtqueue *vq) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev); | |
| struct virtio_mmio_vq_info *info = vq->priv; | |
| unsigned long flags; | |
| unsigned int index = vq->index; | |
| spin_lock_irqsave(&vm_dev->lock, flags); | |
| list_del(&info->node); | |
| spin_unlock_irqrestore(&vm_dev->lock, flags); | |
| /* Select and deactivate the queue */ | |
| writel(index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL); | |
| if (vm_dev->version == 1) { | |
| writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN); | |
| } else { | |
| writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_READY); | |
| WARN_ON(readl(vm_dev->base + VIRTIO_MMIO_QUEUE_READY)); | |
| } | |
| vring_del_virtqueue(vq); | |
| kfree(info); | |
| } | |
| static void vm_del_vqs(struct virtio_device *vdev) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| struct virtqueue *vq, *n; | |
| list_for_each_entry_safe(vq, n, &vdev->vqs, list) | |
| vm_del_vq(vq); | |
| free_irq(platform_get_irq(vm_dev->pdev, 0), vm_dev); | |
| } | |
| static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index, | |
| void (*callback)(struct virtqueue *vq), | |
| const char *name) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| struct virtio_mmio_vq_info *info; | |
| struct virtqueue *vq; | |
| unsigned long flags; | |
| unsigned int num; | |
| int err; | |
| if (!name) | |
| return NULL; | |
| /* Select the queue we're interested in */ | |
| writel(index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL); | |
| /* Queue shouldn't already be set up. */ | |
| if (readl(vm_dev->base + (vm_dev->version == 1 ? | |
| VIRTIO_MMIO_QUEUE_PFN : VIRTIO_MMIO_QUEUE_READY))) { | |
| err = -ENOENT; | |
| goto error_available; | |
| } | |
| /* Allocate and fill out our active queue description */ | |
| info = kmalloc(sizeof(*info), GFP_KERNEL); | |
| if (!info) { | |
| err = -ENOMEM; | |
| goto error_kmalloc; | |
| } | |
| num = readl(vm_dev->base + VIRTIO_MMIO_QUEUE_NUM_MAX); | |
| if (num == 0) { | |
| err = -ENOENT; | |
| goto error_new_virtqueue; | |
| } | |
| /* Create the vring */ | |
| vq = vring_create_virtqueue(index, num, VIRTIO_MMIO_VRING_ALIGN, vdev, | |
| true, true, vm_notify, callback, name); | |
| if (!vq) { | |
| err = -ENOMEM; | |
| goto error_new_virtqueue; | |
| } | |
| /* Activate the queue */ | |
| writel(virtqueue_get_vring_size(vq), vm_dev->base + VIRTIO_MMIO_QUEUE_NUM); | |
| if (vm_dev->version == 1) { | |
| writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_QUEUE_ALIGN); | |
| writel(virtqueue_get_desc_addr(vq) >> PAGE_SHIFT, | |
| vm_dev->base + VIRTIO_MMIO_QUEUE_PFN); | |
| } else { | |
| u64 addr; | |
| addr = virtqueue_get_desc_addr(vq); | |
| writel((u32)addr, vm_dev->base + VIRTIO_MMIO_QUEUE_DESC_LOW); | |
| writel((u32)(addr >> 32), | |
| vm_dev->base + VIRTIO_MMIO_QUEUE_DESC_HIGH); | |
| addr = virtqueue_get_avail_addr(vq); | |
| writel((u32)addr, vm_dev->base + VIRTIO_MMIO_QUEUE_AVAIL_LOW); | |
| writel((u32)(addr >> 32), | |
| vm_dev->base + VIRTIO_MMIO_QUEUE_AVAIL_HIGH); | |
| addr = virtqueue_get_used_addr(vq); | |
| writel((u32)addr, vm_dev->base + VIRTIO_MMIO_QUEUE_USED_LOW); | |
| writel((u32)(addr >> 32), | |
| vm_dev->base + VIRTIO_MMIO_QUEUE_USED_HIGH); | |
| writel(1, vm_dev->base + VIRTIO_MMIO_QUEUE_READY); | |
| } | |
| vq->priv = info; | |
| info->vq = vq; | |
| spin_lock_irqsave(&vm_dev->lock, flags); | |
| list_add(&info->node, &vm_dev->virtqueues); | |
| spin_unlock_irqrestore(&vm_dev->lock, flags); | |
| return vq; | |
| error_new_virtqueue: | |
| if (vm_dev->version == 1) { | |
| writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN); | |
| } else { | |
| writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_READY); | |
| WARN_ON(readl(vm_dev->base + VIRTIO_MMIO_QUEUE_READY)); | |
| } | |
| kfree(info); | |
| error_kmalloc: | |
| error_available: | |
| return ERR_PTR(err); | |
| } | |
| static int vm_find_vqs(struct virtio_device *vdev, unsigned nvqs, | |
| struct virtqueue *vqs[], | |
| vq_callback_t *callbacks[], | |
| const char * const names[]) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| unsigned int irq = platform_get_irq(vm_dev->pdev, 0); | |
| int i, err; | |
| err = request_irq(irq, vm_interrupt, IRQF_SHARED, | |
| dev_name(&vdev->dev), vm_dev); | |
| if (err) | |
| return err; | |
| for (i = 0; i < nvqs; ++i) { | |
| vqs[i] = vm_setup_vq(vdev, i, callbacks[i], names[i]); | |
| if (IS_ERR(vqs[i])) { | |
| vm_del_vqs(vdev); | |
| return PTR_ERR(vqs[i]); | |
| } | |
| } | |
| return 0; | |
| } | |
| static const char *vm_bus_name(struct virtio_device *vdev) | |
| { | |
| struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev); | |
| return vm_dev->pdev->name; | |
| } | |
| static const struct virtio_config_ops virtio_mmio_config_ops = { | |
| .get = vm_get, | |
| .set = vm_set, | |
| .generation = vm_generation, | |
| .get_status = vm_get_status, | |
| .set_status = vm_set_status, | |
| .reset = vm_reset, | |
| .find_vqs = vm_find_vqs, | |
| .del_vqs = vm_del_vqs, | |
| .get_features = vm_get_features, | |
| .finalize_features = vm_finalize_features, | |
| .bus_name = vm_bus_name, | |
| }; | |
| /* Platform device */ | |
| static int virtio_mmio_probe(struct platform_device *pdev) | |
| { | |
| struct virtio_mmio_device *vm_dev; | |
| struct resource *mem; | |
| unsigned long magic; | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (!mem) | |
| return -EINVAL; | |
| if (!devm_request_mem_region(&pdev->dev, mem->start, | |
| resource_size(mem), pdev->name)) | |
| return -EBUSY; | |
| vm_dev = devm_kzalloc(&pdev->dev, sizeof(*vm_dev), GFP_KERNEL); | |
| if (!vm_dev) | |
| return -ENOMEM; | |
| vm_dev->vdev.dev.parent = &pdev->dev; | |
| vm_dev->vdev.config = &virtio_mmio_config_ops; | |
| vm_dev->pdev = pdev; | |
| INIT_LIST_HEAD(&vm_dev->virtqueues); | |
| spin_lock_init(&vm_dev->lock); | |
| vm_dev->base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem)); | |
| if (vm_dev->base == NULL) | |
| return -EFAULT; | |
| /* Check magic value */ | |
| magic = readl(vm_dev->base + VIRTIO_MMIO_MAGIC_VALUE); | |
| if (magic != ('v' | 'i' << 8 | 'r' << 16 | 't' << 24)) { | |
| dev_warn(&pdev->dev, "Wrong magic value 0x%08lx!\n", magic); | |
| return -ENODEV; | |
| } | |
| /* Check device version */ | |
| vm_dev->version = readl(vm_dev->base + VIRTIO_MMIO_VERSION); | |
| if (vm_dev->version < 1 || vm_dev->version > 2) { | |
| dev_err(&pdev->dev, "Version %ld not supported!\n", | |
| vm_dev->version); | |
| return -ENXIO; | |
| } | |
| vm_dev->vdev.id.device = readl(vm_dev->base + VIRTIO_MMIO_DEVICE_ID); | |
| if (vm_dev->vdev.id.device == 0) { | |
| /* | |
| * virtio-mmio device with an ID 0 is a (dummy) placeholder | |
| * with no function. End probing now with no error reported. | |
| */ | |
| return -ENODEV; | |
| } | |
| vm_dev->vdev.id.vendor = readl(vm_dev->base + VIRTIO_MMIO_VENDOR_ID); | |
| if (vm_dev->version == 1) | |
| writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE); | |
| platform_set_drvdata(pdev, vm_dev); | |
| return register_virtio_device(&vm_dev->vdev); | |
| } | |
| static int virtio_mmio_remove(struct platform_device *pdev) | |
| { | |
| struct virtio_mmio_device *vm_dev = platform_get_drvdata(pdev); | |
| unregister_virtio_device(&vm_dev->vdev); | |
| return 0; | |
| } | |
| /* Devices list parameter */ | |
| #if defined(CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES) | |
| static struct device vm_cmdline_parent = { | |
| .init_name = "virtio-mmio-cmdline", | |
| }; | |
| static int vm_cmdline_parent_registered; | |
| static int vm_cmdline_id; | |
| static int vm_cmdline_set(const char *device, | |
| const struct kernel_param *kp) | |
| { | |
| int err; | |
| struct resource resources[2] = {}; | |
| char *str; | |
| long long int base, size; | |
| unsigned int irq; | |
| int processed, consumed = 0; | |
| struct platform_device *pdev; | |
| /* Consume "size" part of the command line parameter */ | |
| size = memparse(device, &str); | |
| /* Get "@<base>:<irq>[:<id>]" chunks */ | |
| processed = sscanf(str, "@%lli:%u%n:%d%n", | |
| &base, &irq, &consumed, | |
| &vm_cmdline_id, &consumed); | |
| /* | |
| * sscanf() must processes at least 2 chunks; also there | |
| * must be no extra characters after the last chunk, so | |
| * str[consumed] must be '\0' | |
| */ | |
| if (processed < 2 || str[consumed]) | |
| return -EINVAL; | |
| resources[0].flags = IORESOURCE_MEM; | |
| resources[0].start = base; | |
| resources[0].end = base + size - 1; | |
| resources[1].flags = IORESOURCE_IRQ; | |
| resources[1].start = resources[1].end = irq; | |
| if (!vm_cmdline_parent_registered) { | |
| err = device_register(&vm_cmdline_parent); | |
| if (err) { | |
| pr_err("Failed to register parent device!\n"); | |
| return err; | |
| } | |
| vm_cmdline_parent_registered = 1; | |
| } | |
| pr_info("Registering device virtio-mmio.%d at 0x%llx-0x%llx, IRQ %d.\n", | |
| vm_cmdline_id, | |
| (unsigned long long)resources[0].start, | |
| (unsigned long long)resources[0].end, | |
| (int)resources[1].start); | |
| pdev = platform_device_register_resndata(&vm_cmdline_parent, | |
| "virtio-mmio", vm_cmdline_id++, | |
| resources, ARRAY_SIZE(resources), NULL, 0); | |
| if (IS_ERR(pdev)) | |
| return PTR_ERR(pdev); | |
| return 0; | |
| } | |
| static int vm_cmdline_get_device(struct device *dev, void *data) | |
| { | |
| char *buffer = data; | |
| unsigned int len = strlen(buffer); | |
| struct platform_device *pdev = to_platform_device(dev); | |
| snprintf(buffer + len, PAGE_SIZE - len, "0x%llx@0x%llx:%llu:%d\n", | |
| pdev->resource[0].end - pdev->resource[0].start + 1ULL, | |
| (unsigned long long)pdev->resource[0].start, | |
| (unsigned long long)pdev->resource[1].start, | |
| pdev->id); | |
| return 0; | |
| } | |
| static int vm_cmdline_get(char *buffer, const struct kernel_param *kp) | |
| { | |
| buffer[0] = '\0'; | |
| device_for_each_child(&vm_cmdline_parent, buffer, | |
| vm_cmdline_get_device); | |
| return strlen(buffer) + 1; | |
| } | |
| static const struct kernel_param_ops vm_cmdline_param_ops = { | |
| .set = vm_cmdline_set, | |
| .get = vm_cmdline_get, | |
| }; | |
| device_param_cb(device, &vm_cmdline_param_ops, NULL, S_IRUSR); | |
| static int vm_unregister_cmdline_device(struct device *dev, | |
| void *data) | |
| { | |
| platform_device_unregister(to_platform_device(dev)); | |
| return 0; | |
| } | |
| static void vm_unregister_cmdline_devices(void) | |
| { | |
| if (vm_cmdline_parent_registered) { | |
| device_for_each_child(&vm_cmdline_parent, NULL, | |
| vm_unregister_cmdline_device); | |
| device_unregister(&vm_cmdline_parent); | |
| vm_cmdline_parent_registered = 0; | |
| } | |
| } | |
| #else | |
| static void vm_unregister_cmdline_devices(void) | |
| { | |
| } | |
| #endif | |
| /* Platform driver */ | |
| static struct of_device_id virtio_mmio_match[] = { | |
| { .compatible = "virtio,mmio", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, virtio_mmio_match); | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id virtio_mmio_acpi_match[] = { | |
| { "LNRO0005", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, virtio_mmio_acpi_match); | |
| #endif | |
| static struct platform_driver virtio_mmio_driver = { | |
| .probe = virtio_mmio_probe, | |
| .remove = virtio_mmio_remove, | |
| .driver = { | |
| .name = "virtio-mmio", | |
| .of_match_table = virtio_mmio_match, | |
| .acpi_match_table = ACPI_PTR(virtio_mmio_acpi_match), | |
| }, | |
| }; | |
| static int __init virtio_mmio_init(void) | |
| { | |
| return platform_driver_register(&virtio_mmio_driver); | |
| } | |
| static void __exit virtio_mmio_exit(void) | |
| { | |
| platform_driver_unregister(&virtio_mmio_driver); | |
| vm_unregister_cmdline_devices(); | |
| } | |
| module_init(virtio_mmio_init); | |
| module_exit(virtio_mmio_exit); | |
| MODULE_AUTHOR("Pawel Moll <pawel.moll@arm.com>"); | |
| MODULE_DESCRIPTION("Platform bus driver for memory mapped virtio devices"); | |
| MODULE_LICENSE("GPL"); |