| /*************************************************************************** | |
| * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> * | |
| * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> * | |
| * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> * | |
| * * | |
| * This program is free software; you can redistribute it and/or modify * | |
| * it under the terms of the GNU General Public License as published by * | |
| * the Free Software Foundation; either version 2 of the License, or * | |
| * (at your option) any later version. * | |
| * * | |
| * This program is distributed in the hope that it will be useful, * | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of * | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * | |
| * GNU General Public License for more details. * | |
| * * | |
| * You should have received a copy of the GNU General Public License * | |
| * along with this program; if not, write to the * | |
| * Free Software Foundation, Inc., * | |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * | |
| ***************************************************************************/ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/err.h> | |
| #include <linux/fs.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/ioport.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/notifier.h> | |
| #include <linux/reboot.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/watchdog.h> | |
| #define DRVNAME "f71808e_wdt" | |
| #define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */ | |
| #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ | |
| #define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ | |
| #define SIO_REG_LDSEL 0x07 /* Logical device select */ | |
| #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ | |
| #define SIO_REG_DEVREV 0x22 /* Device revision */ | |
| #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ | |
| #define SIO_REG_ROM_ADDR_SEL 0x27 /* ROM address select */ | |
| #define SIO_F81866_REG_PORT_SEL 0x27 /* F81866 Multi-Function Register */ | |
| #define SIO_REG_MFUNCT1 0x29 /* Multi function select 1 */ | |
| #define SIO_REG_MFUNCT2 0x2a /* Multi function select 2 */ | |
| #define SIO_REG_MFUNCT3 0x2b /* Multi function select 3 */ | |
| #define SIO_F81866_REG_GPIO1 0x2c /* F81866 GPIO1 Enable Register */ | |
| #define SIO_REG_ENABLE 0x30 /* Logical device enable */ | |
| #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ | |
| #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */ | |
| #define SIO_F71808_ID 0x0901 /* Chipset ID */ | |
| #define SIO_F71858_ID 0x0507 /* Chipset ID */ | |
| #define SIO_F71862_ID 0x0601 /* Chipset ID */ | |
| #define SIO_F71869_ID 0x0814 /* Chipset ID */ | |
| #define SIO_F71869A_ID 0x1007 /* Chipset ID */ | |
| #define SIO_F71882_ID 0x0541 /* Chipset ID */ | |
| #define SIO_F71889_ID 0x0723 /* Chipset ID */ | |
| #define SIO_F81865_ID 0x0704 /* Chipset ID */ | |
| #define SIO_F81866_ID 0x1010 /* Chipset ID */ | |
| #define F71808FG_REG_WDO_CONF 0xf0 | |
| #define F71808FG_REG_WDT_CONF 0xf5 | |
| #define F71808FG_REG_WD_TIME 0xf6 | |
| #define F71808FG_FLAG_WDOUT_EN 7 | |
| #define F71808FG_FLAG_WDTMOUT_STS 6 | |
| #define F71808FG_FLAG_WD_EN 5 | |
| #define F71808FG_FLAG_WD_PULSE 4 | |
| #define F71808FG_FLAG_WD_UNIT 3 | |
| #define F81865_REG_WDO_CONF 0xfa | |
| #define F81865_FLAG_WDOUT_EN 0 | |
| /* Default values */ | |
| #define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */ | |
| #define WATCHDOG_MAX_TIMEOUT (60 * 255) | |
| #define WATCHDOG_PULSE_WIDTH 125 /* 125 ms, default pulse width for | |
| watchdog signal */ | |
| #define WATCHDOG_F71862FG_PIN 63 /* default watchdog reset output | |
| pin number 63 */ | |
| static unsigned short force_id; | |
| module_param(force_id, ushort, 0); | |
| MODULE_PARM_DESC(force_id, "Override the detected device ID"); | |
| static const int max_timeout = WATCHDOG_MAX_TIMEOUT; | |
| static int timeout = WATCHDOG_TIMEOUT; /* default timeout in seconds */ | |
| module_param(timeout, int, 0); | |
| MODULE_PARM_DESC(timeout, | |
| "Watchdog timeout in seconds. 1<= timeout <=" | |
| __MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default=" | |
| __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); | |
| static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH; | |
| module_param(pulse_width, uint, 0); | |
| MODULE_PARM_DESC(pulse_width, | |
| "Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms" | |
| " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")"); | |
| static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN; | |
| module_param(f71862fg_pin, uint, 0); | |
| MODULE_PARM_DESC(f71862fg_pin, | |
| "Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63" | |
| " (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")"); | |
| static bool nowayout = WATCHDOG_NOWAYOUT; | |
| module_param(nowayout, bool, 0444); | |
| MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); | |
| static unsigned int start_withtimeout; | |
| module_param(start_withtimeout, uint, 0); | |
| MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" | |
| " given initial timeout. Zero (default) disables this feature."); | |
| enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865, | |
| f81866}; | |
| static const char *f71808e_names[] = { | |
| "f71808fg", | |
| "f71858fg", | |
| "f71862fg", | |
| "f71869", | |
| "f71882fg", | |
| "f71889fg", | |
| "f81865", | |
| "f81866", | |
| }; | |
| /* Super-I/O Function prototypes */ | |
| static inline int superio_inb(int base, int reg); | |
| static inline int superio_inw(int base, int reg); | |
| static inline void superio_outb(int base, int reg, u8 val); | |
| static inline void superio_set_bit(int base, int reg, int bit); | |
| static inline void superio_clear_bit(int base, int reg, int bit); | |
| static inline int superio_enter(int base); | |
| static inline void superio_select(int base, int ld); | |
| static inline void superio_exit(int base); | |
| struct watchdog_data { | |
| unsigned short sioaddr; | |
| enum chips type; | |
| unsigned long opened; | |
| struct mutex lock; | |
| char expect_close; | |
| struct watchdog_info ident; | |
| unsigned short timeout; | |
| u8 timer_val; /* content for the wd_time register */ | |
| char minutes_mode; | |
| u8 pulse_val; /* pulse width flag */ | |
| char pulse_mode; /* enable pulse output mode? */ | |
| char caused_reboot; /* last reboot was by the watchdog */ | |
| }; | |
| static struct watchdog_data watchdog = { | |
| .lock = __MUTEX_INITIALIZER(watchdog.lock), | |
| }; | |
| /* Super I/O functions */ | |
| static inline int superio_inb(int base, int reg) | |
| { | |
| outb(reg, base); | |
| return inb(base + 1); | |
| } | |
| static int superio_inw(int base, int reg) | |
| { | |
| int val; | |
| val = superio_inb(base, reg) << 8; | |
| val |= superio_inb(base, reg + 1); | |
| return val; | |
| } | |
| static inline void superio_outb(int base, int reg, u8 val) | |
| { | |
| outb(reg, base); | |
| outb(val, base + 1); | |
| } | |
| static inline void superio_set_bit(int base, int reg, int bit) | |
| { | |
| unsigned long val = superio_inb(base, reg); | |
| __set_bit(bit, &val); | |
| superio_outb(base, reg, val); | |
| } | |
| static inline void superio_clear_bit(int base, int reg, int bit) | |
| { | |
| unsigned long val = superio_inb(base, reg); | |
| __clear_bit(bit, &val); | |
| superio_outb(base, reg, val); | |
| } | |
| static inline int superio_enter(int base) | |
| { | |
| /* Don't step on other drivers' I/O space by accident */ | |
| if (!request_muxed_region(base, 2, DRVNAME)) { | |
| pr_err("I/O address 0x%04x already in use\n", (int)base); | |
| return -EBUSY; | |
| } | |
| /* according to the datasheet the key must be sent twice! */ | |
| outb(SIO_UNLOCK_KEY, base); | |
| outb(SIO_UNLOCK_KEY, base); | |
| return 0; | |
| } | |
| static inline void superio_select(int base, int ld) | |
| { | |
| outb(SIO_REG_LDSEL, base); | |
| outb(ld, base + 1); | |
| } | |
| static inline void superio_exit(int base) | |
| { | |
| outb(SIO_LOCK_KEY, base); | |
| release_region(base, 2); | |
| } | |
| static int watchdog_set_timeout(int timeout) | |
| { | |
| if (timeout <= 0 | |
| || timeout > max_timeout) { | |
| pr_err("watchdog timeout out of range\n"); | |
| return -EINVAL; | |
| } | |
| mutex_lock(&watchdog.lock); | |
| watchdog.timeout = timeout; | |
| if (timeout > 0xff) { | |
| watchdog.timer_val = DIV_ROUND_UP(timeout, 60); | |
| watchdog.minutes_mode = true; | |
| } else { | |
| watchdog.timer_val = timeout; | |
| watchdog.minutes_mode = false; | |
| } | |
| mutex_unlock(&watchdog.lock); | |
| return 0; | |
| } | |
| static int watchdog_set_pulse_width(unsigned int pw) | |
| { | |
| int err = 0; | |
| mutex_lock(&watchdog.lock); | |
| if (pw <= 1) { | |
| watchdog.pulse_val = 0; | |
| } else if (pw <= 25) { | |
| watchdog.pulse_val = 1; | |
| } else if (pw <= 125) { | |
| watchdog.pulse_val = 2; | |
| } else if (pw <= 5000) { | |
| watchdog.pulse_val = 3; | |
| } else { | |
| pr_err("pulse width out of range\n"); | |
| err = -EINVAL; | |
| goto exit_unlock; | |
| } | |
| watchdog.pulse_mode = pw; | |
| exit_unlock: | |
| mutex_unlock(&watchdog.lock); | |
| return err; | |
| } | |
| static int watchdog_keepalive(void) | |
| { | |
| int err = 0; | |
| mutex_lock(&watchdog.lock); | |
| err = superio_enter(watchdog.sioaddr); | |
| if (err) | |
| goto exit_unlock; | |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); | |
| if (watchdog.minutes_mode) | |
| /* select minutes for timer units */ | |
| superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, | |
| F71808FG_FLAG_WD_UNIT); | |
| else | |
| /* select seconds for timer units */ | |
| superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, | |
| F71808FG_FLAG_WD_UNIT); | |
| /* Set timer value */ | |
| superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME, | |
| watchdog.timer_val); | |
| superio_exit(watchdog.sioaddr); | |
| exit_unlock: | |
| mutex_unlock(&watchdog.lock); | |
| return err; | |
| } | |
| static int f71862fg_pin_configure(unsigned short ioaddr) | |
| { | |
| /* When ioaddr is non-zero the calling function has to take care of | |
| mutex handling and superio preparation! */ | |
| if (f71862fg_pin == 63) { | |
| if (ioaddr) { | |
| /* SPI must be disabled first to use this pin! */ | |
| superio_clear_bit(ioaddr, SIO_REG_ROM_ADDR_SEL, 6); | |
| superio_set_bit(ioaddr, SIO_REG_MFUNCT3, 4); | |
| } | |
| } else if (f71862fg_pin == 56) { | |
| if (ioaddr) | |
| superio_set_bit(ioaddr, SIO_REG_MFUNCT1, 1); | |
| } else { | |
| pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int watchdog_start(void) | |
| { | |
| /* Make sure we don't die as soon as the watchdog is enabled below */ | |
| int err = watchdog_keepalive(); | |
| if (err) | |
| return err; | |
| mutex_lock(&watchdog.lock); | |
| err = superio_enter(watchdog.sioaddr); | |
| if (err) | |
| goto exit_unlock; | |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); | |
| /* Watchdog pin configuration */ | |
| switch (watchdog.type) { | |
| case f71808fg: | |
| /* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */ | |
| superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT2, 3); | |
| superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 3); | |
| break; | |
| case f71862fg: | |
| err = f71862fg_pin_configure(watchdog.sioaddr); | |
| if (err) | |
| goto exit_superio; | |
| break; | |
| case f71869: | |
| /* GPIO14 --> WDTRST# */ | |
| superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4); | |
| break; | |
| case f71882fg: | |
| /* Set pin 56 to WDTRST# */ | |
| superio_set_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 1); | |
| break; | |
| case f71889fg: | |
| /* set pin 40 to WDTRST# */ | |
| superio_outb(watchdog.sioaddr, SIO_REG_MFUNCT3, | |
| superio_inb(watchdog.sioaddr, SIO_REG_MFUNCT3) & 0xcf); | |
| break; | |
| case f81865: | |
| /* Set pin 70 to WDTRST# */ | |
| superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 5); | |
| break; | |
| case f81866: | |
| /* Set pin 70 to WDTRST# */ | |
| superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, | |
| BIT(3) | BIT(0)); | |
| superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL, | |
| BIT(2)); | |
| /* | |
| * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0. | |
| * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch: | |
| * BIT5: 0 -> WDTRST# | |
| * 1 -> GPIO15 | |
| */ | |
| superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1, | |
| BIT(5)); | |
| break; | |
| default: | |
| /* | |
| * 'default' label to shut up the compiler and catch | |
| * programmer errors | |
| */ | |
| err = -ENODEV; | |
| goto exit_superio; | |
| } | |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); | |
| superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0); | |
| if (watchdog.type == f81865 || watchdog.type == f81866) | |
| superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF, | |
| F81865_FLAG_WDOUT_EN); | |
| else | |
| superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF, | |
| F71808FG_FLAG_WDOUT_EN); | |
| superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, | |
| F71808FG_FLAG_WD_EN); | |
| if (watchdog.pulse_mode) { | |
| /* Select "pulse" output mode with given duration */ | |
| u8 wdt_conf = superio_inb(watchdog.sioaddr, | |
| F71808FG_REG_WDT_CONF); | |
| /* Set WD_PSWIDTH bits (1:0) */ | |
| wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03); | |
| /* Set WD_PULSE to "pulse" mode */ | |
| wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE); | |
| superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF, | |
| wdt_conf); | |
| } else { | |
| /* Select "level" output mode */ | |
| superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, | |
| F71808FG_FLAG_WD_PULSE); | |
| } | |
| exit_superio: | |
| superio_exit(watchdog.sioaddr); | |
| exit_unlock: | |
| mutex_unlock(&watchdog.lock); | |
| return err; | |
| } | |
| static int watchdog_stop(void) | |
| { | |
| int err = 0; | |
| mutex_lock(&watchdog.lock); | |
| err = superio_enter(watchdog.sioaddr); | |
| if (err) | |
| goto exit_unlock; | |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); | |
| superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF, | |
| F71808FG_FLAG_WD_EN); | |
| superio_exit(watchdog.sioaddr); | |
| exit_unlock: | |
| mutex_unlock(&watchdog.lock); | |
| return err; | |
| } | |
| static int watchdog_get_status(void) | |
| { | |
| int status = 0; | |
| mutex_lock(&watchdog.lock); | |
| status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0; | |
| mutex_unlock(&watchdog.lock); | |
| return status; | |
| } | |
| static bool watchdog_is_running(void) | |
| { | |
| /* | |
| * if we fail to determine the watchdog's status assume it to be | |
| * running to be on the safe side | |
| */ | |
| bool is_running = true; | |
| mutex_lock(&watchdog.lock); | |
| if (superio_enter(watchdog.sioaddr)) | |
| goto exit_unlock; | |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); | |
| is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0)) | |
| && (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF) | |
| & F71808FG_FLAG_WD_EN); | |
| superio_exit(watchdog.sioaddr); | |
| exit_unlock: | |
| mutex_unlock(&watchdog.lock); | |
| return is_running; | |
| } | |
| /* /dev/watchdog api */ | |
| static int watchdog_open(struct inode *inode, struct file *file) | |
| { | |
| int err; | |
| /* If the watchdog is alive we don't need to start it again */ | |
| if (test_and_set_bit(0, &watchdog.opened)) | |
| return -EBUSY; | |
| err = watchdog_start(); | |
| if (err) { | |
| clear_bit(0, &watchdog.opened); | |
| return err; | |
| } | |
| if (nowayout) | |
| __module_get(THIS_MODULE); | |
| watchdog.expect_close = 0; | |
| return nonseekable_open(inode, file); | |
| } | |
| static int watchdog_release(struct inode *inode, struct file *file) | |
| { | |
| clear_bit(0, &watchdog.opened); | |
| if (!watchdog.expect_close) { | |
| watchdog_keepalive(); | |
| pr_crit("Unexpected close, not stopping watchdog!\n"); | |
| } else if (!nowayout) { | |
| watchdog_stop(); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * watchdog_write: | |
| * @file: file handle to the watchdog | |
| * @buf: buffer to write | |
| * @count: count of bytes | |
| * @ppos: pointer to the position to write. No seeks allowed | |
| * | |
| * A write to a watchdog device is defined as a keepalive signal. Any | |
| * write of data will do, as we we don't define content meaning. | |
| */ | |
| static ssize_t watchdog_write(struct file *file, const char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| if (count) { | |
| if (!nowayout) { | |
| size_t i; | |
| /* In case it was set long ago */ | |
| bool expect_close = false; | |
| for (i = 0; i != count; i++) { | |
| char c; | |
| if (get_user(c, buf + i)) | |
| return -EFAULT; | |
| expect_close = (c == 'V'); | |
| } | |
| /* Properly order writes across fork()ed processes */ | |
| mutex_lock(&watchdog.lock); | |
| watchdog.expect_close = expect_close; | |
| mutex_unlock(&watchdog.lock); | |
| } | |
| /* someone wrote to us, we should restart timer */ | |
| watchdog_keepalive(); | |
| } | |
| return count; | |
| } | |
| /* | |
| * watchdog_ioctl: | |
| * @inode: inode of the device | |
| * @file: file handle to the device | |
| * @cmd: watchdog command | |
| * @arg: argument pointer | |
| * | |
| * The watchdog API defines a common set of functions for all watchdogs | |
| * according to their available features. | |
| */ | |
| static long watchdog_ioctl(struct file *file, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| int status; | |
| int new_options; | |
| int new_timeout; | |
| union { | |
| struct watchdog_info __user *ident; | |
| int __user *i; | |
| } uarg; | |
| uarg.i = (int __user *)arg; | |
| switch (cmd) { | |
| case WDIOC_GETSUPPORT: | |
| return copy_to_user(uarg.ident, &watchdog.ident, | |
| sizeof(watchdog.ident)) ? -EFAULT : 0; | |
| case WDIOC_GETSTATUS: | |
| status = watchdog_get_status(); | |
| if (status < 0) | |
| return status; | |
| return put_user(status, uarg.i); | |
| case WDIOC_GETBOOTSTATUS: | |
| return put_user(0, uarg.i); | |
| case WDIOC_SETOPTIONS: | |
| if (get_user(new_options, uarg.i)) | |
| return -EFAULT; | |
| if (new_options & WDIOS_DISABLECARD) | |
| watchdog_stop(); | |
| if (new_options & WDIOS_ENABLECARD) | |
| return watchdog_start(); | |
| case WDIOC_KEEPALIVE: | |
| watchdog_keepalive(); | |
| return 0; | |
| case WDIOC_SETTIMEOUT: | |
| if (get_user(new_timeout, uarg.i)) | |
| return -EFAULT; | |
| if (watchdog_set_timeout(new_timeout)) | |
| return -EINVAL; | |
| watchdog_keepalive(); | |
| /* Fall */ | |
| case WDIOC_GETTIMEOUT: | |
| return put_user(watchdog.timeout, uarg.i); | |
| default: | |
| return -ENOTTY; | |
| } | |
| } | |
| static int watchdog_notify_sys(struct notifier_block *this, unsigned long code, | |
| void *unused) | |
| { | |
| if (code == SYS_DOWN || code == SYS_HALT) | |
| watchdog_stop(); | |
| return NOTIFY_DONE; | |
| } | |
| static const struct file_operations watchdog_fops = { | |
| .owner = THIS_MODULE, | |
| .llseek = no_llseek, | |
| .open = watchdog_open, | |
| .release = watchdog_release, | |
| .write = watchdog_write, | |
| .unlocked_ioctl = watchdog_ioctl, | |
| }; | |
| static struct miscdevice watchdog_miscdev = { | |
| .minor = WATCHDOG_MINOR, | |
| .name = "watchdog", | |
| .fops = &watchdog_fops, | |
| }; | |
| static struct notifier_block watchdog_notifier = { | |
| .notifier_call = watchdog_notify_sys, | |
| }; | |
| static int __init watchdog_init(int sioaddr) | |
| { | |
| int wdt_conf, err = 0; | |
| /* No need to lock watchdog.lock here because no entry points | |
| * into the module have been registered yet. | |
| */ | |
| watchdog.sioaddr = sioaddr; | |
| watchdog.ident.options = WDIOC_SETTIMEOUT | |
| | WDIOF_MAGICCLOSE | |
| | WDIOF_KEEPALIVEPING; | |
| snprintf(watchdog.ident.identity, | |
| sizeof(watchdog.ident.identity), "%s watchdog", | |
| f71808e_names[watchdog.type]); | |
| err = superio_enter(sioaddr); | |
| if (err) | |
| return err; | |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); | |
| wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF); | |
| watchdog.caused_reboot = wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS); | |
| superio_exit(sioaddr); | |
| err = watchdog_set_timeout(timeout); | |
| if (err) | |
| return err; | |
| err = watchdog_set_pulse_width(pulse_width); | |
| if (err) | |
| return err; | |
| err = register_reboot_notifier(&watchdog_notifier); | |
| if (err) | |
| return err; | |
| err = misc_register(&watchdog_miscdev); | |
| if (err) { | |
| pr_err("cannot register miscdev on minor=%d\n", | |
| watchdog_miscdev.minor); | |
| goto exit_reboot; | |
| } | |
| if (start_withtimeout) { | |
| if (start_withtimeout <= 0 | |
| || start_withtimeout > max_timeout) { | |
| pr_err("starting timeout out of range\n"); | |
| err = -EINVAL; | |
| goto exit_miscdev; | |
| } | |
| err = watchdog_start(); | |
| if (err) { | |
| pr_err("cannot start watchdog timer\n"); | |
| goto exit_miscdev; | |
| } | |
| mutex_lock(&watchdog.lock); | |
| err = superio_enter(sioaddr); | |
| if (err) | |
| goto exit_unlock; | |
| superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT); | |
| if (start_withtimeout > 0xff) { | |
| /* select minutes for timer units */ | |
| superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF, | |
| F71808FG_FLAG_WD_UNIT); | |
| superio_outb(sioaddr, F71808FG_REG_WD_TIME, | |
| DIV_ROUND_UP(start_withtimeout, 60)); | |
| } else { | |
| /* select seconds for timer units */ | |
| superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF, | |
| F71808FG_FLAG_WD_UNIT); | |
| superio_outb(sioaddr, F71808FG_REG_WD_TIME, | |
| start_withtimeout); | |
| } | |
| superio_exit(sioaddr); | |
| mutex_unlock(&watchdog.lock); | |
| if (nowayout) | |
| __module_get(THIS_MODULE); | |
| pr_info("watchdog started with initial timeout of %u sec\n", | |
| start_withtimeout); | |
| } | |
| return 0; | |
| exit_unlock: | |
| mutex_unlock(&watchdog.lock); | |
| exit_miscdev: | |
| misc_deregister(&watchdog_miscdev); | |
| exit_reboot: | |
| unregister_reboot_notifier(&watchdog_notifier); | |
| return err; | |
| } | |
| static int __init f71808e_find(int sioaddr) | |
| { | |
| u16 devid; | |
| int err = superio_enter(sioaddr); | |
| if (err) | |
| return err; | |
| devid = superio_inw(sioaddr, SIO_REG_MANID); | |
| if (devid != SIO_FINTEK_ID) { | |
| pr_debug("Not a Fintek device\n"); | |
| err = -ENODEV; | |
| goto exit; | |
| } | |
| devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); | |
| switch (devid) { | |
| case SIO_F71808_ID: | |
| watchdog.type = f71808fg; | |
| break; | |
| case SIO_F71862_ID: | |
| watchdog.type = f71862fg; | |
| err = f71862fg_pin_configure(0); /* validate module parameter */ | |
| break; | |
| case SIO_F71869_ID: | |
| case SIO_F71869A_ID: | |
| watchdog.type = f71869; | |
| break; | |
| case SIO_F71882_ID: | |
| watchdog.type = f71882fg; | |
| break; | |
| case SIO_F71889_ID: | |
| watchdog.type = f71889fg; | |
| break; | |
| case SIO_F71858_ID: | |
| /* Confirmed (by datasheet) not to have a watchdog. */ | |
| err = -ENODEV; | |
| goto exit; | |
| case SIO_F81865_ID: | |
| watchdog.type = f81865; | |
| break; | |
| case SIO_F81866_ID: | |
| watchdog.type = f81866; | |
| break; | |
| default: | |
| pr_info("Unrecognized Fintek device: %04x\n", | |
| (unsigned int)devid); | |
| err = -ENODEV; | |
| goto exit; | |
| } | |
| pr_info("Found %s watchdog chip, revision %d\n", | |
| f71808e_names[watchdog.type], | |
| (int)superio_inb(sioaddr, SIO_REG_DEVREV)); | |
| exit: | |
| superio_exit(sioaddr); | |
| return err; | |
| } | |
| static int __init f71808e_init(void) | |
| { | |
| static const unsigned short addrs[] = { 0x2e, 0x4e }; | |
| int err = -ENODEV; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(addrs); i++) { | |
| err = f71808e_find(addrs[i]); | |
| if (err == 0) | |
| break; | |
| } | |
| if (i == ARRAY_SIZE(addrs)) | |
| return err; | |
| return watchdog_init(addrs[i]); | |
| } | |
| static void __exit f71808e_exit(void) | |
| { | |
| if (watchdog_is_running()) { | |
| pr_warn("Watchdog timer still running, stopping it\n"); | |
| watchdog_stop(); | |
| } | |
| misc_deregister(&watchdog_miscdev); | |
| unregister_reboot_notifier(&watchdog_notifier); | |
| } | |
| MODULE_DESCRIPTION("F71808E Watchdog Driver"); | |
| MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(f71808e_init); | |
| module_exit(f71808e_exit); |