| /* | |
| * Watchdog Timer Driver | |
| * for ITE IT87xx Environment Control - Low Pin Count Input / Output | |
| * | |
| * (c) Copyright 2007 Oliver Schuster <olivers137@aol.com> | |
| * | |
| * Based on softdog.c by Alan Cox, | |
| * 83977f_wdt.c by Jose Goncalves, | |
| * it87.c by Chris Gauthron, Jean Delvare | |
| * | |
| * Data-sheets: Publicly available at the ITE website | |
| * http://www.ite.com.tw/ | |
| * | |
| * Support of the watchdog timers, which are available on | |
| * IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, | |
| * IT8728 and IT8783. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <linux/fs.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/watchdog.h> | |
| #include <linux/notifier.h> | |
| #include <linux/reboot.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/io.h> | |
| #define WATCHDOG_VERSION "1.14" | |
| #define WATCHDOG_NAME "IT87 WDT" | |
| #define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" | |
| #define WD_MAGIC 'V' | |
| /* Defaults for Module Parameter */ | |
| #define DEFAULT_NOGAMEPORT 0 | |
| #define DEFAULT_NOCIR 0 | |
| #define DEFAULT_EXCLUSIVE 1 | |
| #define DEFAULT_TIMEOUT 60 | |
| #define DEFAULT_TESTMODE 0 | |
| #define DEFAULT_NOWAYOUT WATCHDOG_NOWAYOUT | |
| /* IO Ports */ | |
| #define REG 0x2e | |
| #define VAL 0x2f | |
| /* Logical device Numbers LDN */ | |
| #define GPIO 0x07 | |
| #define GAMEPORT 0x09 | |
| #define CIR 0x0a | |
| /* Configuration Registers and Functions */ | |
| #define LDNREG 0x07 | |
| #define CHIPID 0x20 | |
| #define CHIPREV 0x22 | |
| #define ACTREG 0x30 | |
| #define BASEREG 0x60 | |
| /* Chip Id numbers */ | |
| #define NO_DEV_ID 0xffff | |
| #define IT8702_ID 0x8702 | |
| #define IT8705_ID 0x8705 | |
| #define IT8712_ID 0x8712 | |
| #define IT8716_ID 0x8716 | |
| #define IT8718_ID 0x8718 | |
| #define IT8720_ID 0x8720 | |
| #define IT8721_ID 0x8721 | |
| #define IT8726_ID 0x8726 /* the data sheet suggest wrongly 0x8716 */ | |
| #define IT8728_ID 0x8728 | |
| #define IT8783_ID 0x8783 | |
| /* GPIO Configuration Registers LDN=0x07 */ | |
| #define WDTCTRL 0x71 | |
| #define WDTCFG 0x72 | |
| #define WDTVALLSB 0x73 | |
| #define WDTVALMSB 0x74 | |
| /* GPIO Bits WDTCTRL */ | |
| #define WDT_CIRINT 0x80 | |
| #define WDT_MOUSEINT 0x40 | |
| #define WDT_KYBINT 0x20 | |
| #define WDT_GAMEPORT 0x10 /* not in it8718, it8720, it8721, it8728 */ | |
| #define WDT_FORCE 0x02 | |
| #define WDT_ZERO 0x01 | |
| /* GPIO Bits WDTCFG */ | |
| #define WDT_TOV1 0x80 | |
| #define WDT_KRST 0x40 | |
| #define WDT_TOVE 0x20 | |
| #define WDT_PWROK 0x10 /* not in it8721 */ | |
| #define WDT_INT_MASK 0x0f | |
| /* CIR Configuration Register LDN=0x0a */ | |
| #define CIR_ILS 0x70 | |
| /* The default Base address is not always available, we use this */ | |
| #define CIR_BASE 0x0208 | |
| /* CIR Controller */ | |
| #define CIR_DR(b) (b) | |
| #define CIR_IER(b) (b + 1) | |
| #define CIR_RCR(b) (b + 2) | |
| #define CIR_TCR1(b) (b + 3) | |
| #define CIR_TCR2(b) (b + 4) | |
| #define CIR_TSR(b) (b + 5) | |
| #define CIR_RSR(b) (b + 6) | |
| #define CIR_BDLR(b) (b + 5) | |
| #define CIR_BDHR(b) (b + 6) | |
| #define CIR_IIR(b) (b + 7) | |
| /* Default Base address of Game port */ | |
| #define GP_BASE_DEFAULT 0x0201 | |
| /* wdt_status */ | |
| #define WDTS_TIMER_RUN 0 | |
| #define WDTS_DEV_OPEN 1 | |
| #define WDTS_KEEPALIVE 2 | |
| #define WDTS_LOCKED 3 | |
| #define WDTS_USE_GP 4 | |
| #define WDTS_EXPECTED 5 | |
| #define WDTS_USE_CIR 6 | |
| static unsigned int base, gpact, ciract, max_units, chip_type; | |
| static unsigned long wdt_status; | |
| static int nogameport = DEFAULT_NOGAMEPORT; | |
| static int nocir = DEFAULT_NOCIR; | |
| static int exclusive = DEFAULT_EXCLUSIVE; | |
| static int timeout = DEFAULT_TIMEOUT; | |
| static int testmode = DEFAULT_TESTMODE; | |
| static bool nowayout = DEFAULT_NOWAYOUT; | |
| module_param(nogameport, int, 0); | |
| MODULE_PARM_DESC(nogameport, "Forbid the activation of game port, default=" | |
| __MODULE_STRING(DEFAULT_NOGAMEPORT)); | |
| module_param(nocir, int, 0); | |
| MODULE_PARM_DESC(nocir, "Forbid the use of Consumer IR interrupts to reset timer, default=" | |
| __MODULE_STRING(DEFAULT_NOCIR)); | |
| module_param(exclusive, int, 0); | |
| MODULE_PARM_DESC(exclusive, "Watchdog exclusive device open, default=" | |
| __MODULE_STRING(DEFAULT_EXCLUSIVE)); | |
| module_param(timeout, int, 0); | |
| MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default=" | |
| __MODULE_STRING(DEFAULT_TIMEOUT)); | |
| module_param(testmode, int, 0); | |
| MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default=" | |
| __MODULE_STRING(DEFAULT_TESTMODE)); | |
| module_param(nowayout, bool, 0); | |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default=" | |
| __MODULE_STRING(WATCHDOG_NOWAYOUT)); | |
| /* Superio Chip */ | |
| static inline int superio_enter(void) | |
| { | |
| /* | |
| * Try to reserve REG and REG + 1 for exclusive access. | |
| */ | |
| if (!request_muxed_region(REG, 2, WATCHDOG_NAME)) | |
| return -EBUSY; | |
| outb(0x87, REG); | |
| outb(0x01, REG); | |
| outb(0x55, REG); | |
| outb(0x55, REG); | |
| return 0; | |
| } | |
| static inline void superio_exit(void) | |
| { | |
| outb(0x02, REG); | |
| outb(0x02, VAL); | |
| release_region(REG, 2); | |
| } | |
| static inline void superio_select(int ldn) | |
| { | |
| outb(LDNREG, REG); | |
| outb(ldn, VAL); | |
| } | |
| static inline int superio_inb(int reg) | |
| { | |
| outb(reg, REG); | |
| return inb(VAL); | |
| } | |
| static inline void superio_outb(int val, int reg) | |
| { | |
| outb(reg, REG); | |
| outb(val, VAL); | |
| } | |
| static inline int superio_inw(int reg) | |
| { | |
| int val; | |
| outb(reg++, REG); | |
| val = inb(VAL) << 8; | |
| outb(reg, REG); | |
| val |= inb(VAL); | |
| return val; | |
| } | |
| static inline void superio_outw(int val, int reg) | |
| { | |
| outb(reg++, REG); | |
| outb(val >> 8, VAL); | |
| outb(reg, REG); | |
| outb(val, VAL); | |
| } | |
| /* Internal function, should be called after superio_select(GPIO) */ | |
| static void wdt_update_timeout(void) | |
| { | |
| unsigned char cfg = WDT_KRST; | |
| int tm = timeout; | |
| if (testmode) | |
| cfg = 0; | |
| if (tm <= max_units) | |
| cfg |= WDT_TOV1; | |
| else | |
| tm /= 60; | |
| if (chip_type != IT8721_ID) | |
| cfg |= WDT_PWROK; | |
| superio_outb(cfg, WDTCFG); | |
| superio_outb(tm, WDTVALLSB); | |
| if (max_units > 255) | |
| superio_outb(tm>>8, WDTVALMSB); | |
| } | |
| static int wdt_round_time(int t) | |
| { | |
| t += 59; | |
| t -= t % 60; | |
| return t; | |
| } | |
| /* watchdog timer handling */ | |
| static void wdt_keepalive(void) | |
| { | |
| if (test_bit(WDTS_USE_GP, &wdt_status)) | |
| inb(base); | |
| else if (test_bit(WDTS_USE_CIR, &wdt_status)) | |
| /* The timer reloads with around 5 msec delay */ | |
| outb(0x55, CIR_DR(base)); | |
| else { | |
| if (superio_enter()) | |
| return; | |
| superio_select(GPIO); | |
| wdt_update_timeout(); | |
| superio_exit(); | |
| } | |
| set_bit(WDTS_KEEPALIVE, &wdt_status); | |
| } | |
| static int wdt_start(void) | |
| { | |
| int ret = superio_enter(); | |
| if (ret) | |
| return ret; | |
| superio_select(GPIO); | |
| if (test_bit(WDTS_USE_GP, &wdt_status)) | |
| superio_outb(WDT_GAMEPORT, WDTCTRL); | |
| else if (test_bit(WDTS_USE_CIR, &wdt_status)) | |
| superio_outb(WDT_CIRINT, WDTCTRL); | |
| wdt_update_timeout(); | |
| superio_exit(); | |
| return 0; | |
| } | |
| static int wdt_stop(void) | |
| { | |
| int ret = superio_enter(); | |
| if (ret) | |
| return ret; | |
| superio_select(GPIO); | |
| superio_outb(0x00, WDTCTRL); | |
| superio_outb(WDT_TOV1, WDTCFG); | |
| superio_outb(0x00, WDTVALLSB); | |
| if (max_units > 255) | |
| superio_outb(0x00, WDTVALMSB); | |
| superio_exit(); | |
| return 0; | |
| } | |
| /** | |
| * wdt_set_timeout - set a new timeout value with watchdog ioctl | |
| * @t: timeout value in seconds | |
| * | |
| * The hardware device has a 8 or 16 bit watchdog timer (depends on | |
| * chip version) that can be configured to count seconds or minutes. | |
| * | |
| * Used within WDIOC_SETTIMEOUT watchdog device ioctl. | |
| */ | |
| static int wdt_set_timeout(int t) | |
| { | |
| if (t < 1 || t > max_units * 60) | |
| return -EINVAL; | |
| if (t > max_units) | |
| timeout = wdt_round_time(t); | |
| else | |
| timeout = t; | |
| if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { | |
| int ret = superio_enter(); | |
| if (ret) | |
| return ret; | |
| superio_select(GPIO); | |
| wdt_update_timeout(); | |
| superio_exit(); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * wdt_get_status - determines the status supported by watchdog ioctl | |
| * @status: status returned to user space | |
| * | |
| * The status bit of the device does not allow to distinguish | |
| * between a regular system reset and a watchdog forced reset. | |
| * But, in test mode it is useful, so it is supported through | |
| * WDIOC_GETSTATUS watchdog ioctl. Additionally the driver | |
| * reports the keepalive signal and the acception of the magic. | |
| * | |
| * Used within WDIOC_GETSTATUS watchdog device ioctl. | |
| */ | |
| static int wdt_get_status(int *status) | |
| { | |
| *status = 0; | |
| if (testmode) { | |
| int ret = superio_enter(); | |
| if (ret) | |
| return ret; | |
| superio_select(GPIO); | |
| if (superio_inb(WDTCTRL) & WDT_ZERO) { | |
| superio_outb(0x00, WDTCTRL); | |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); | |
| *status |= WDIOF_CARDRESET; | |
| } | |
| superio_exit(); | |
| } | |
| if (test_and_clear_bit(WDTS_KEEPALIVE, &wdt_status)) | |
| *status |= WDIOF_KEEPALIVEPING; | |
| if (test_bit(WDTS_EXPECTED, &wdt_status)) | |
| *status |= WDIOF_MAGICCLOSE; | |
| return 0; | |
| } | |
| /* /dev/watchdog handling */ | |
| /** | |
| * wdt_open - watchdog file_operations .open | |
| * @inode: inode of the device | |
| * @file: file handle to the device | |
| * | |
| * The watchdog timer starts by opening the device. | |
| * | |
| * Used within the file operation of the watchdog device. | |
| */ | |
| static int wdt_open(struct inode *inode, struct file *file) | |
| { | |
| if (exclusive && test_and_set_bit(WDTS_DEV_OPEN, &wdt_status)) | |
| return -EBUSY; | |
| if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { | |
| int ret; | |
| if (nowayout && !test_and_set_bit(WDTS_LOCKED, &wdt_status)) | |
| __module_get(THIS_MODULE); | |
| ret = wdt_start(); | |
| if (ret) { | |
| clear_bit(WDTS_LOCKED, &wdt_status); | |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); | |
| clear_bit(WDTS_DEV_OPEN, &wdt_status); | |
| return ret; | |
| } | |
| } | |
| return nonseekable_open(inode, file); | |
| } | |
| /** | |
| * wdt_release - watchdog file_operations .release | |
| * @inode: inode of the device | |
| * @file: file handle to the device | |
| * | |
| * Closing the watchdog device either stops the watchdog timer | |
| * or in the case, that nowayout is set or the magic character | |
| * wasn't written, a critical warning about an running watchdog | |
| * timer is given. | |
| * | |
| * Used within the file operation of the watchdog device. | |
| */ | |
| static int wdt_release(struct inode *inode, struct file *file) | |
| { | |
| if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { | |
| if (test_and_clear_bit(WDTS_EXPECTED, &wdt_status)) { | |
| int ret = wdt_stop(); | |
| if (ret) { | |
| /* | |
| * Stop failed. Just keep the watchdog alive | |
| * and hope nothing bad happens. | |
| */ | |
| set_bit(WDTS_EXPECTED, &wdt_status); | |
| wdt_keepalive(); | |
| return ret; | |
| } | |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); | |
| } else { | |
| wdt_keepalive(); | |
| pr_crit("unexpected close, not stopping watchdog!\n"); | |
| } | |
| } | |
| clear_bit(WDTS_DEV_OPEN, &wdt_status); | |
| return 0; | |
| } | |
| /** | |
| * wdt_write - watchdog file_operations .write | |
| * @file: file handle to the watchdog | |
| * @buf: buffer to write | |
| * @count: count of bytes | |
| * @ppos: pointer to the position to write. No seeks allowed | |
| * | |
| * A write to a watchdog device is defined as a keepalive signal. Any | |
| * write of data will do, as we don't define content meaning. | |
| * | |
| * Used within the file operation of the watchdog device. | |
| */ | |
| static ssize_t wdt_write(struct file *file, const char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| if (count) { | |
| clear_bit(WDTS_EXPECTED, &wdt_status); | |
| wdt_keepalive(); | |
| } | |
| if (!nowayout) { | |
| size_t ofs; | |
| /* note: just in case someone wrote the magic character long ago */ | |
| for (ofs = 0; ofs != count; ofs++) { | |
| char c; | |
| if (get_user(c, buf + ofs)) | |
| return -EFAULT; | |
| if (c == WD_MAGIC) | |
| set_bit(WDTS_EXPECTED, &wdt_status); | |
| } | |
| } | |
| return count; | |
| } | |
| static const struct watchdog_info ident = { | |
| .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, | |
| .firmware_version = 1, | |
| .identity = WATCHDOG_NAME, | |
| }; | |
| /** | |
| * wdt_ioctl - watchdog file_operations .unlocked_ioctl | |
| * @file: file handle to the device | |
| * @cmd: watchdog command | |
| * @arg: argument pointer | |
| * | |
| * The watchdog API defines a common set of functions for all watchdogs | |
| * according to their available features. | |
| * | |
| * Used within the file operation of the watchdog device. | |
| */ | |
| static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | |
| { | |
| int rc = 0, status, new_options, new_timeout; | |
| union { | |
| struct watchdog_info __user *ident; | |
| int __user *i; | |
| } uarg; | |
| uarg.i = (int __user *)arg; | |
| switch (cmd) { | |
| case WDIOC_GETSUPPORT: | |
| return copy_to_user(uarg.ident, | |
| &ident, sizeof(ident)) ? -EFAULT : 0; | |
| case WDIOC_GETSTATUS: | |
| rc = wdt_get_status(&status); | |
| if (rc) | |
| return rc; | |
| return put_user(status, uarg.i); | |
| case WDIOC_GETBOOTSTATUS: | |
| return put_user(0, uarg.i); | |
| case WDIOC_KEEPALIVE: | |
| wdt_keepalive(); | |
| return 0; | |
| case WDIOC_SETOPTIONS: | |
| if (get_user(new_options, uarg.i)) | |
| return -EFAULT; | |
| switch (new_options) { | |
| case WDIOS_DISABLECARD: | |
| if (test_bit(WDTS_TIMER_RUN, &wdt_status)) { | |
| rc = wdt_stop(); | |
| if (rc) | |
| return rc; | |
| } | |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); | |
| return 0; | |
| case WDIOS_ENABLECARD: | |
| if (!test_and_set_bit(WDTS_TIMER_RUN, &wdt_status)) { | |
| rc = wdt_start(); | |
| if (rc) { | |
| clear_bit(WDTS_TIMER_RUN, &wdt_status); | |
| return rc; | |
| } | |
| } | |
| return 0; | |
| default: | |
| return -EFAULT; | |
| } | |
| case WDIOC_SETTIMEOUT: | |
| if (get_user(new_timeout, uarg.i)) | |
| return -EFAULT; | |
| rc = wdt_set_timeout(new_timeout); | |
| case WDIOC_GETTIMEOUT: | |
| if (put_user(timeout, uarg.i)) | |
| return -EFAULT; | |
| return rc; | |
| default: | |
| return -ENOTTY; | |
| } | |
| } | |
| static int wdt_notify_sys(struct notifier_block *this, unsigned long code, | |
| void *unused) | |
| { | |
| if (code == SYS_DOWN || code == SYS_HALT) | |
| wdt_stop(); | |
| return NOTIFY_DONE; | |
| } | |
| static const struct file_operations wdt_fops = { | |
| .owner = THIS_MODULE, | |
| .llseek = no_llseek, | |
| .write = wdt_write, | |
| .unlocked_ioctl = wdt_ioctl, | |
| .open = wdt_open, | |
| .release = wdt_release, | |
| }; | |
| static struct miscdevice wdt_miscdev = { | |
| .minor = WATCHDOG_MINOR, | |
| .name = "watchdog", | |
| .fops = &wdt_fops, | |
| }; | |
| static struct notifier_block wdt_notifier = { | |
| .notifier_call = wdt_notify_sys, | |
| }; | |
| static int __init it87_wdt_init(void) | |
| { | |
| int rc = 0; | |
| int try_gameport = !nogameport; | |
| u8 chip_rev; | |
| int gp_rreq_fail = 0; | |
| wdt_status = 0; | |
| rc = superio_enter(); | |
| if (rc) | |
| return rc; | |
| chip_type = superio_inw(CHIPID); | |
| chip_rev = superio_inb(CHIPREV) & 0x0f; | |
| superio_exit(); | |
| switch (chip_type) { | |
| case IT8702_ID: | |
| max_units = 255; | |
| break; | |
| case IT8712_ID: | |
| max_units = (chip_rev < 8) ? 255 : 65535; | |
| break; | |
| case IT8716_ID: | |
| case IT8726_ID: | |
| max_units = 65535; | |
| break; | |
| case IT8718_ID: | |
| case IT8720_ID: | |
| case IT8721_ID: | |
| case IT8728_ID: | |
| case IT8783_ID: | |
| max_units = 65535; | |
| try_gameport = 0; | |
| break; | |
| case IT8705_ID: | |
| pr_err("Unsupported Chip found, Chip %04x Revision %02x\n", | |
| chip_type, chip_rev); | |
| return -ENODEV; | |
| case NO_DEV_ID: | |
| pr_err("no device\n"); | |
| return -ENODEV; | |
| default: | |
| pr_err("Unknown Chip found, Chip %04x Revision %04x\n", | |
| chip_type, chip_rev); | |
| return -ENODEV; | |
| } | |
| rc = superio_enter(); | |
| if (rc) | |
| return rc; | |
| superio_select(GPIO); | |
| superio_outb(WDT_TOV1, WDTCFG); | |
| superio_outb(0x00, WDTCTRL); | |
| /* First try to get Gameport support */ | |
| if (try_gameport) { | |
| superio_select(GAMEPORT); | |
| base = superio_inw(BASEREG); | |
| if (!base) { | |
| base = GP_BASE_DEFAULT; | |
| superio_outw(base, BASEREG); | |
| } | |
| gpact = superio_inb(ACTREG); | |
| superio_outb(0x01, ACTREG); | |
| if (request_region(base, 1, WATCHDOG_NAME)) | |
| set_bit(WDTS_USE_GP, &wdt_status); | |
| else | |
| gp_rreq_fail = 1; | |
| } | |
| /* If we haven't Gameport support, try to get CIR support */ | |
| if (!nocir && !test_bit(WDTS_USE_GP, &wdt_status)) { | |
| if (!request_region(CIR_BASE, 8, WATCHDOG_NAME)) { | |
| if (gp_rreq_fail) | |
| pr_err("I/O Address 0x%04x and 0x%04x already in use\n", | |
| base, CIR_BASE); | |
| else | |
| pr_err("I/O Address 0x%04x already in use\n", | |
| CIR_BASE); | |
| rc = -EIO; | |
| goto err_out; | |
| } | |
| base = CIR_BASE; | |
| superio_select(CIR); | |
| superio_outw(base, BASEREG); | |
| superio_outb(0x00, CIR_ILS); | |
| ciract = superio_inb(ACTREG); | |
| superio_outb(0x01, ACTREG); | |
| if (gp_rreq_fail) { | |
| superio_select(GAMEPORT); | |
| superio_outb(gpact, ACTREG); | |
| } | |
| set_bit(WDTS_USE_CIR, &wdt_status); | |
| } | |
| if (timeout < 1 || timeout > max_units * 60) { | |
| timeout = DEFAULT_TIMEOUT; | |
| pr_warn("Timeout value out of range, use default %d sec\n", | |
| DEFAULT_TIMEOUT); | |
| } | |
| if (timeout > max_units) | |
| timeout = wdt_round_time(timeout); | |
| rc = register_reboot_notifier(&wdt_notifier); | |
| if (rc) { | |
| pr_err("Cannot register reboot notifier (err=%d)\n", rc); | |
| goto err_out_region; | |
| } | |
| rc = misc_register(&wdt_miscdev); | |
| if (rc) { | |
| pr_err("Cannot register miscdev on minor=%d (err=%d)\n", | |
| wdt_miscdev.minor, rc); | |
| goto err_out_reboot; | |
| } | |
| /* Initialize CIR to use it as keepalive source */ | |
| if (test_bit(WDTS_USE_CIR, &wdt_status)) { | |
| outb(0x00, CIR_RCR(base)); | |
| outb(0xc0, CIR_TCR1(base)); | |
| outb(0x5c, CIR_TCR2(base)); | |
| outb(0x10, CIR_IER(base)); | |
| outb(0x00, CIR_BDHR(base)); | |
| outb(0x01, CIR_BDLR(base)); | |
| outb(0x09, CIR_IER(base)); | |
| } | |
| pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d exclusive=%d nogameport=%d nocir=%d)\n", | |
| chip_type, chip_rev, timeout, | |
| nowayout, testmode, exclusive, nogameport, nocir); | |
| superio_exit(); | |
| return 0; | |
| err_out_reboot: | |
| unregister_reboot_notifier(&wdt_notifier); | |
| err_out_region: | |
| if (test_bit(WDTS_USE_GP, &wdt_status)) | |
| release_region(base, 1); | |
| else if (test_bit(WDTS_USE_CIR, &wdt_status)) { | |
| release_region(base, 8); | |
| superio_select(CIR); | |
| superio_outb(ciract, ACTREG); | |
| } | |
| err_out: | |
| if (try_gameport) { | |
| superio_select(GAMEPORT); | |
| superio_outb(gpact, ACTREG); | |
| } | |
| superio_exit(); | |
| return rc; | |
| } | |
| static void __exit it87_wdt_exit(void) | |
| { | |
| if (superio_enter() == 0) { | |
| superio_select(GPIO); | |
| superio_outb(0x00, WDTCTRL); | |
| superio_outb(0x00, WDTCFG); | |
| superio_outb(0x00, WDTVALLSB); | |
| if (max_units > 255) | |
| superio_outb(0x00, WDTVALMSB); | |
| if (test_bit(WDTS_USE_GP, &wdt_status)) { | |
| superio_select(GAMEPORT); | |
| superio_outb(gpact, ACTREG); | |
| } else if (test_bit(WDTS_USE_CIR, &wdt_status)) { | |
| superio_select(CIR); | |
| superio_outb(ciract, ACTREG); | |
| } | |
| superio_exit(); | |
| } | |
| misc_deregister(&wdt_miscdev); | |
| unregister_reboot_notifier(&wdt_notifier); | |
| if (test_bit(WDTS_USE_GP, &wdt_status)) | |
| release_region(base, 1); | |
| else if (test_bit(WDTS_USE_CIR, &wdt_status)) | |
| release_region(base, 8); | |
| } | |
| module_init(it87_wdt_init); | |
| module_exit(it87_wdt_exit); | |
| MODULE_AUTHOR("Oliver Schuster"); | |
| MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O"); | |
| MODULE_LICENSE("GPL"); |