| /* | |
| * w83627hf/thf WDT driver | |
| * | |
| * (c) Copyright 2013 Guenter Roeck | |
| * converted to watchdog infrastructure | |
| * | |
| * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com> | |
| * added support for W83627THF. | |
| * | |
| * (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com> | |
| * | |
| * Based on advantechwdt.c which is based on wdt.c. | |
| * Original copyright messages: | |
| * | |
| * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> | |
| * | |
| * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, | |
| * All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| * | |
| * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide | |
| * warranty for any of this software. This material is provided | |
| * "AS-IS" and at no charge. | |
| * | |
| * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk> | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/types.h> | |
| #include <linux/watchdog.h> | |
| #include <linux/ioport.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT" | |
| #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ | |
| static int wdt_io; | |
| static int cr_wdt_timeout; /* WDT timeout register */ | |
| static int cr_wdt_control; /* WDT control register */ | |
| static int cr_wdt_csr; /* WDT control & status register */ | |
| enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf, | |
| w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, | |
| w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 }; | |
| static int timeout; /* in seconds */ | |
| module_param(timeout, int, 0); | |
| MODULE_PARM_DESC(timeout, | |
| "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" | |
| __MODULE_STRING(WATCHDOG_TIMEOUT) "."); | |
| static bool nowayout = WATCHDOG_NOWAYOUT; | |
| module_param(nowayout, bool, 0); | |
| MODULE_PARM_DESC(nowayout, | |
| "Watchdog cannot be stopped once started (default=" | |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | |
| static int early_disable; | |
| module_param(early_disable, int, 0); | |
| MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)"); | |
| /* | |
| * Kernel methods. | |
| */ | |
| #define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */ | |
| #define WDT_EFIR (wdt_io+0) /* Extended Function Index Register | |
| (same as EFER) */ | |
| #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */ | |
| #define W83627HF_LD_WDT 0x08 | |
| #define W83627HF_ID 0x52 | |
| #define W83627S_ID 0x59 | |
| #define W83697HF_ID 0x60 | |
| #define W83697UG_ID 0x68 | |
| #define W83637HF_ID 0x70 | |
| #define W83627THF_ID 0x82 | |
| #define W83687THF_ID 0x85 | |
| #define W83627EHF_ID 0x88 | |
| #define W83627DHG_ID 0xa0 | |
| #define W83627UHG_ID 0xa2 | |
| #define W83667HG_ID 0xa5 | |
| #define W83627DHG_P_ID 0xb0 | |
| #define W83667HG_B_ID 0xb3 | |
| #define NCT6775_ID 0xb4 | |
| #define NCT6776_ID 0xc3 | |
| #define NCT6102_ID 0xc4 | |
| #define NCT6779_ID 0xc5 | |
| #define NCT6791_ID 0xc8 | |
| #define NCT6792_ID 0xc9 | |
| #define W83627HF_WDT_TIMEOUT 0xf6 | |
| #define W83697HF_WDT_TIMEOUT 0xf4 | |
| #define NCT6102D_WDT_TIMEOUT 0xf1 | |
| #define W83627HF_WDT_CONTROL 0xf5 | |
| #define W83697HF_WDT_CONTROL 0xf3 | |
| #define NCT6102D_WDT_CONTROL 0xf0 | |
| #define W836X7HF_WDT_CSR 0xf7 | |
| #define NCT6102D_WDT_CSR 0xf2 | |
| static void superio_outb(int reg, int val) | |
| { | |
| outb(reg, WDT_EFER); | |
| outb(val, WDT_EFDR); | |
| } | |
| static inline int superio_inb(int reg) | |
| { | |
| outb(reg, WDT_EFER); | |
| return inb(WDT_EFDR); | |
| } | |
| static int superio_enter(void) | |
| { | |
| if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME)) | |
| return -EBUSY; | |
| outb_p(0x87, WDT_EFER); /* Enter extended function mode */ | |
| outb_p(0x87, WDT_EFER); /* Again according to manual */ | |
| return 0; | |
| } | |
| static void superio_select(int ld) | |
| { | |
| superio_outb(0x07, ld); | |
| } | |
| static void superio_exit(void) | |
| { | |
| outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ | |
| release_region(wdt_io, 2); | |
| } | |
| static int w83627hf_init(struct watchdog_device *wdog, enum chips chip) | |
| { | |
| int ret; | |
| unsigned char t; | |
| ret = superio_enter(); | |
| if (ret) | |
| return ret; | |
| superio_select(W83627HF_LD_WDT); | |
| /* set CR30 bit 0 to activate GPIO2 */ | |
| t = superio_inb(0x30); | |
| if (!(t & 0x01)) | |
| superio_outb(0x30, t | 0x01); | |
| switch (chip) { | |
| case w83627hf: | |
| case w83627s: | |
| t = superio_inb(0x2B) & ~0x10; | |
| superio_outb(0x2B, t); /* set GPIO24 to WDT0 */ | |
| break; | |
| case w83697hf: | |
| /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ | |
| t = superio_inb(0x29) & ~0x60; | |
| t |= 0x20; | |
| superio_outb(0x29, t); | |
| break; | |
| case w83697ug: | |
| /* Set pin 118 to WDTO# mode */ | |
| t = superio_inb(0x2b) & ~0x04; | |
| superio_outb(0x2b, t); | |
| break; | |
| case w83627thf: | |
| t = (superio_inb(0x2B) & ~0x08) | 0x04; | |
| superio_outb(0x2B, t); /* set GPIO3 to WDT0 */ | |
| break; | |
| case w83627dhg: | |
| case w83627dhg_p: | |
| t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */ | |
| superio_outb(0x2D, t); /* set GPIO5 to WDT0 */ | |
| t = superio_inb(cr_wdt_control); | |
| t |= 0x02; /* enable the WDTO# output low pulse | |
| * to the KBRST# pin */ | |
| superio_outb(cr_wdt_control, t); | |
| break; | |
| case w83637hf: | |
| break; | |
| case w83687thf: | |
| t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */ | |
| superio_outb(0x2C, t); | |
| break; | |
| case w83627ehf: | |
| case w83627uhg: | |
| case w83667hg: | |
| case w83667hg_b: | |
| case nct6775: | |
| case nct6776: | |
| case nct6779: | |
| case nct6791: | |
| case nct6792: | |
| case nct6102: | |
| /* | |
| * These chips have a fixed WDTO# output pin (W83627UHG), | |
| * or support more than one WDTO# output pin. | |
| * Don't touch its configuration, and hope the BIOS | |
| * does the right thing. | |
| */ | |
| t = superio_inb(cr_wdt_control); | |
| t |= 0x02; /* enable the WDTO# output low pulse | |
| * to the KBRST# pin */ | |
| superio_outb(cr_wdt_control, t); | |
| break; | |
| default: | |
| break; | |
| } | |
| t = superio_inb(cr_wdt_timeout); | |
| if (t != 0) { | |
| if (early_disable) { | |
| pr_warn("Stopping previously enabled watchdog until userland kicks in\n"); | |
| superio_outb(cr_wdt_timeout, 0); | |
| } else { | |
| pr_info("Watchdog already running. Resetting timeout to %d sec\n", | |
| wdog->timeout); | |
| superio_outb(cr_wdt_timeout, wdog->timeout); | |
| } | |
| } | |
| /* set second mode & disable keyboard turning off watchdog */ | |
| t = superio_inb(cr_wdt_control) & ~0x0C; | |
| superio_outb(cr_wdt_control, t); | |
| /* reset trigger, disable keyboard & mouse turning off watchdog */ | |
| t = superio_inb(cr_wdt_csr) & ~0xD0; | |
| superio_outb(cr_wdt_csr, t); | |
| superio_exit(); | |
| return 0; | |
| } | |
| static int wdt_set_time(unsigned int timeout) | |
| { | |
| int ret; | |
| ret = superio_enter(); | |
| if (ret) | |
| return ret; | |
| superio_select(W83627HF_LD_WDT); | |
| superio_outb(cr_wdt_timeout, timeout); | |
| superio_exit(); | |
| return 0; | |
| } | |
| static int wdt_start(struct watchdog_device *wdog) | |
| { | |
| return wdt_set_time(wdog->timeout); | |
| } | |
| static int wdt_stop(struct watchdog_device *wdog) | |
| { | |
| return wdt_set_time(0); | |
| } | |
| static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout) | |
| { | |
| wdog->timeout = timeout; | |
| return 0; | |
| } | |
| static unsigned int wdt_get_time(struct watchdog_device *wdog) | |
| { | |
| unsigned int timeleft; | |
| int ret; | |
| ret = superio_enter(); | |
| if (ret) | |
| return 0; | |
| superio_select(W83627HF_LD_WDT); | |
| timeleft = superio_inb(cr_wdt_timeout); | |
| superio_exit(); | |
| return timeleft; | |
| } | |
| /* | |
| * Kernel Interfaces | |
| */ | |
| static struct watchdog_info wdt_info = { | |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, | |
| .identity = "W83627HF Watchdog", | |
| }; | |
| static const struct watchdog_ops wdt_ops = { | |
| .owner = THIS_MODULE, | |
| .start = wdt_start, | |
| .stop = wdt_stop, | |
| .set_timeout = wdt_set_timeout, | |
| .get_timeleft = wdt_get_time, | |
| }; | |
| static struct watchdog_device wdt_dev = { | |
| .info = &wdt_info, | |
| .ops = &wdt_ops, | |
| .timeout = WATCHDOG_TIMEOUT, | |
| .min_timeout = 1, | |
| .max_timeout = 255, | |
| }; | |
| /* | |
| * The WDT needs to learn about soft shutdowns in order to | |
| * turn the timebomb registers off. | |
| */ | |
| static int wdt_find(int addr) | |
| { | |
| u8 val; | |
| int ret; | |
| cr_wdt_timeout = W83627HF_WDT_TIMEOUT; | |
| cr_wdt_control = W83627HF_WDT_CONTROL; | |
| cr_wdt_csr = W836X7HF_WDT_CSR; | |
| ret = superio_enter(); | |
| if (ret) | |
| return ret; | |
| superio_select(W83627HF_LD_WDT); | |
| val = superio_inb(0x20); | |
| switch (val) { | |
| case W83627HF_ID: | |
| ret = w83627hf; | |
| break; | |
| case W83627S_ID: | |
| ret = w83627s; | |
| break; | |
| case W83697HF_ID: | |
| ret = w83697hf; | |
| cr_wdt_timeout = W83697HF_WDT_TIMEOUT; | |
| cr_wdt_control = W83697HF_WDT_CONTROL; | |
| break; | |
| case W83697UG_ID: | |
| ret = w83697ug; | |
| cr_wdt_timeout = W83697HF_WDT_TIMEOUT; | |
| cr_wdt_control = W83697HF_WDT_CONTROL; | |
| break; | |
| case W83637HF_ID: | |
| ret = w83637hf; | |
| break; | |
| case W83627THF_ID: | |
| ret = w83627thf; | |
| break; | |
| case W83687THF_ID: | |
| ret = w83687thf; | |
| break; | |
| case W83627EHF_ID: | |
| ret = w83627ehf; | |
| break; | |
| case W83627DHG_ID: | |
| ret = w83627dhg; | |
| break; | |
| case W83627DHG_P_ID: | |
| ret = w83627dhg_p; | |
| break; | |
| case W83627UHG_ID: | |
| ret = w83627uhg; | |
| break; | |
| case W83667HG_ID: | |
| ret = w83667hg; | |
| break; | |
| case W83667HG_B_ID: | |
| ret = w83667hg_b; | |
| break; | |
| case NCT6775_ID: | |
| ret = nct6775; | |
| break; | |
| case NCT6776_ID: | |
| ret = nct6776; | |
| break; | |
| case NCT6779_ID: | |
| ret = nct6779; | |
| break; | |
| case NCT6791_ID: | |
| ret = nct6791; | |
| break; | |
| case NCT6792_ID: | |
| ret = nct6792; | |
| break; | |
| case NCT6102_ID: | |
| ret = nct6102; | |
| cr_wdt_timeout = NCT6102D_WDT_TIMEOUT; | |
| cr_wdt_control = NCT6102D_WDT_CONTROL; | |
| cr_wdt_csr = NCT6102D_WDT_CSR; | |
| break; | |
| case 0xff: | |
| ret = -ENODEV; | |
| break; | |
| default: | |
| ret = -ENODEV; | |
| pr_err("Unsupported chip ID: 0x%02x\n", val); | |
| break; | |
| } | |
| superio_exit(); | |
| return ret; | |
| } | |
| static int __init wdt_init(void) | |
| { | |
| int ret; | |
| int chip; | |
| const char * const chip_name[] = { | |
| "W83627HF", | |
| "W83627S", | |
| "W83697HF", | |
| "W83697UG", | |
| "W83637HF", | |
| "W83627THF", | |
| "W83687THF", | |
| "W83627EHF", | |
| "W83627DHG", | |
| "W83627UHG", | |
| "W83667HG", | |
| "W83667DHG-P", | |
| "W83667HG-B", | |
| "NCT6775", | |
| "NCT6776", | |
| "NCT6779", | |
| "NCT6791", | |
| "NCT6792", | |
| "NCT6102", | |
| }; | |
| wdt_io = 0x2e; | |
| chip = wdt_find(0x2e); | |
| if (chip < 0) { | |
| wdt_io = 0x4e; | |
| chip = wdt_find(0x4e); | |
| if (chip < 0) | |
| return chip; | |
| } | |
| pr_info("WDT driver for %s Super I/O chip initialising\n", | |
| chip_name[chip]); | |
| watchdog_init_timeout(&wdt_dev, timeout, NULL); | |
| watchdog_set_nowayout(&wdt_dev, nowayout); | |
| watchdog_stop_on_reboot(&wdt_dev); | |
| ret = w83627hf_init(&wdt_dev, chip); | |
| if (ret) { | |
| pr_err("failed to initialize watchdog (err=%d)\n", ret); | |
| return ret; | |
| } | |
| ret = watchdog_register_device(&wdt_dev); | |
| if (ret) | |
| return ret; | |
| pr_info("initialized. timeout=%d sec (nowayout=%d)\n", | |
| wdt_dev.timeout, nowayout); | |
| return ret; | |
| } | |
| static void __exit wdt_exit(void) | |
| { | |
| watchdog_unregister_device(&wdt_dev); | |
| } | |
| module_init(wdt_init); | |
| module_exit(wdt_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>"); | |
| MODULE_DESCRIPTION("w83627hf/thf WDT driver"); |