| /* | |
| * fs/logfs/gc.c - garbage collection code | |
| * | |
| * As should be obvious for Linux kernel code, license is GPLv2 | |
| * | |
| * Copyright (c) 2005-2008 Joern Engel <joern@logfs.org> | |
| */ | |
| #include "logfs.h" | |
| #include <linux/sched.h> | |
| #include <linux/slab.h> | |
| /* | |
| * Wear leveling needs to kick in when the difference between low erase | |
| * counts and high erase counts gets too big. A good value for "too big" | |
| * may be somewhat below 10% of maximum erase count for the device. | |
| * Why not 397, to pick a nice round number with no specific meaning? :) | |
| * | |
| * WL_RATELIMIT is the minimum time between two wear level events. A huge | |
| * number of segments may fulfil the requirements for wear leveling at the | |
| * same time. If that happens we don't want to cause a latency from hell, | |
| * but just gently pick one segment every so often and minimize overhead. | |
| */ | |
| #define WL_DELTA 397 | |
| #define WL_RATELIMIT 100 | |
| #define MAX_OBJ_ALIASES 2600 | |
| #define SCAN_RATIO 512 /* number of scanned segments per gc'd segment */ | |
| #define LIST_SIZE 64 /* base size of candidate lists */ | |
| #define SCAN_ROUNDS 128 /* maximum number of complete medium scans */ | |
| #define SCAN_ROUNDS_HIGH 4 /* maximum number of higher-level scans */ | |
| static int no_free_segments(struct super_block *sb) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| return super->s_free_list.count; | |
| } | |
| /* journal has distance -1, top-most ifile layer distance 0 */ | |
| static u8 root_distance(struct super_block *sb, gc_level_t __gc_level) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| u8 gc_level = (__force u8)__gc_level; | |
| switch (gc_level) { | |
| case 0: /* fall through */ | |
| case 1: /* fall through */ | |
| case 2: /* fall through */ | |
| case 3: | |
| /* file data or indirect blocks */ | |
| return super->s_ifile_levels + super->s_iblock_levels - gc_level; | |
| case 6: /* fall through */ | |
| case 7: /* fall through */ | |
| case 8: /* fall through */ | |
| case 9: | |
| /* inode file data or indirect blocks */ | |
| return super->s_ifile_levels - (gc_level - 6); | |
| default: | |
| printk(KERN_ERR"LOGFS: segment of unknown level %x found\n", | |
| gc_level); | |
| WARN_ON(1); | |
| return super->s_ifile_levels + super->s_iblock_levels; | |
| } | |
| } | |
| static int segment_is_reserved(struct super_block *sb, u32 segno) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| struct logfs_area *area; | |
| void *reserved; | |
| int i; | |
| /* Some segments are reserved. Just pretend they were all valid */ | |
| reserved = btree_lookup32(&super->s_reserved_segments, segno); | |
| if (reserved) | |
| return 1; | |
| /* Currently open segments */ | |
| for_each_area(i) { | |
| area = super->s_area[i]; | |
| if (area->a_is_open && area->a_segno == segno) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static void logfs_mark_segment_bad(struct super_block *sb, u32 segno) | |
| { | |
| BUG(); | |
| } | |
| /* | |
| * Returns the bytes consumed by valid objects in this segment. Object headers | |
| * are counted, the segment header is not. | |
| */ | |
| static u32 logfs_valid_bytes(struct super_block *sb, u32 segno, u32 *ec, | |
| gc_level_t *gc_level) | |
| { | |
| struct logfs_segment_entry se; | |
| u32 ec_level; | |
| logfs_get_segment_entry(sb, segno, &se); | |
| if (se.ec_level == cpu_to_be32(BADSEG) || | |
| se.valid == cpu_to_be32(RESERVED)) | |
| return RESERVED; | |
| ec_level = be32_to_cpu(se.ec_level); | |
| *ec = ec_level >> 4; | |
| *gc_level = GC_LEVEL(ec_level & 0xf); | |
| return be32_to_cpu(se.valid); | |
| } | |
| static void logfs_cleanse_block(struct super_block *sb, u64 ofs, u64 ino, | |
| u64 bix, gc_level_t gc_level) | |
| { | |
| struct inode *inode; | |
| int err, cookie; | |
| inode = logfs_safe_iget(sb, ino, &cookie); | |
| err = logfs_rewrite_block(inode, bix, ofs, gc_level, 0); | |
| BUG_ON(err); | |
| logfs_safe_iput(inode, cookie); | |
| } | |
| static u32 logfs_gc_segment(struct super_block *sb, u32 segno) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| struct logfs_segment_header sh; | |
| struct logfs_object_header oh; | |
| u64 ofs, ino, bix; | |
| u32 seg_ofs, logical_segno, cleaned = 0; | |
| int err, len, valid; | |
| gc_level_t gc_level; | |
| LOGFS_BUG_ON(segment_is_reserved(sb, segno), sb); | |
| btree_insert32(&super->s_reserved_segments, segno, (void *)1, GFP_NOFS); | |
| err = wbuf_read(sb, dev_ofs(sb, segno, 0), sizeof(sh), &sh); | |
| BUG_ON(err); | |
| gc_level = GC_LEVEL(sh.level); | |
| logical_segno = be32_to_cpu(sh.segno); | |
| if (sh.crc != logfs_crc32(&sh, sizeof(sh), 4)) { | |
| logfs_mark_segment_bad(sb, segno); | |
| cleaned = -1; | |
| goto out; | |
| } | |
| for (seg_ofs = LOGFS_SEGMENT_HEADERSIZE; | |
| seg_ofs + sizeof(oh) < super->s_segsize; ) { | |
| ofs = dev_ofs(sb, logical_segno, seg_ofs); | |
| err = wbuf_read(sb, dev_ofs(sb, segno, seg_ofs), sizeof(oh), | |
| &oh); | |
| BUG_ON(err); | |
| if (!memchr_inv(&oh, 0xff, sizeof(oh))) | |
| break; | |
| if (oh.crc != logfs_crc32(&oh, sizeof(oh) - 4, 4)) { | |
| logfs_mark_segment_bad(sb, segno); | |
| cleaned = super->s_segsize - 1; | |
| goto out; | |
| } | |
| ino = be64_to_cpu(oh.ino); | |
| bix = be64_to_cpu(oh.bix); | |
| len = sizeof(oh) + be16_to_cpu(oh.len); | |
| valid = logfs_is_valid_block(sb, ofs, ino, bix, gc_level); | |
| if (valid == 1) { | |
| logfs_cleanse_block(sb, ofs, ino, bix, gc_level); | |
| cleaned += len; | |
| } else if (valid == 2) { | |
| /* Will be invalid upon journal commit */ | |
| cleaned += len; | |
| } | |
| seg_ofs += len; | |
| } | |
| out: | |
| btree_remove32(&super->s_reserved_segments, segno); | |
| return cleaned; | |
| } | |
| static struct gc_candidate *add_list(struct gc_candidate *cand, | |
| struct candidate_list *list) | |
| { | |
| struct rb_node **p = &list->rb_tree.rb_node; | |
| struct rb_node *parent = NULL; | |
| struct gc_candidate *cur; | |
| int comp; | |
| cand->list = list; | |
| while (*p) { | |
| parent = *p; | |
| cur = rb_entry(parent, struct gc_candidate, rb_node); | |
| if (list->sort_by_ec) | |
| comp = cand->erase_count < cur->erase_count; | |
| else | |
| comp = cand->valid < cur->valid; | |
| if (comp) | |
| p = &parent->rb_left; | |
| else | |
| p = &parent->rb_right; | |
| } | |
| rb_link_node(&cand->rb_node, parent, p); | |
| rb_insert_color(&cand->rb_node, &list->rb_tree); | |
| if (list->count <= list->maxcount) { | |
| list->count++; | |
| return NULL; | |
| } | |
| cand = rb_entry(rb_last(&list->rb_tree), struct gc_candidate, rb_node); | |
| rb_erase(&cand->rb_node, &list->rb_tree); | |
| cand->list = NULL; | |
| return cand; | |
| } | |
| static void remove_from_list(struct gc_candidate *cand) | |
| { | |
| struct candidate_list *list = cand->list; | |
| rb_erase(&cand->rb_node, &list->rb_tree); | |
| list->count--; | |
| } | |
| static void free_candidate(struct super_block *sb, struct gc_candidate *cand) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| btree_remove32(&super->s_cand_tree, cand->segno); | |
| kfree(cand); | |
| } | |
| u32 get_best_cand(struct super_block *sb, struct candidate_list *list, u32 *ec) | |
| { | |
| struct gc_candidate *cand; | |
| u32 segno; | |
| BUG_ON(list->count == 0); | |
| cand = rb_entry(rb_first(&list->rb_tree), struct gc_candidate, rb_node); | |
| remove_from_list(cand); | |
| segno = cand->segno; | |
| if (ec) | |
| *ec = cand->erase_count; | |
| free_candidate(sb, cand); | |
| return segno; | |
| } | |
| /* | |
| * We have several lists to manage segments with. The reserve_list is used to | |
| * deal with bad blocks. We try to keep the best (lowest ec) segments on this | |
| * list. | |
| * The free_list contains free segments for normal usage. It usually gets the | |
| * second pick after the reserve_list. But when the free_list is running short | |
| * it is more important to keep the free_list full than to keep a reserve. | |
| * | |
| * Segments that are not free are put onto a per-level low_list. If we have | |
| * to run garbage collection, we pick a candidate from there. All segments on | |
| * those lists should have at least some free space so GC will make progress. | |
| * | |
| * And last we have the ec_list, which is used to pick segments for wear | |
| * leveling. | |
| * | |
| * If all appropriate lists are full, we simply free the candidate and forget | |
| * about that segment for a while. We have better candidates for each purpose. | |
| */ | |
| static void __add_candidate(struct super_block *sb, struct gc_candidate *cand) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| u32 full = super->s_segsize - LOGFS_SEGMENT_RESERVE; | |
| if (cand->valid == 0) { | |
| /* 100% free segments */ | |
| log_gc_noisy("add reserve segment %x (ec %x) at %llx\n", | |
| cand->segno, cand->erase_count, | |
| dev_ofs(sb, cand->segno, 0)); | |
| cand = add_list(cand, &super->s_reserve_list); | |
| if (cand) { | |
| log_gc_noisy("add free segment %x (ec %x) at %llx\n", | |
| cand->segno, cand->erase_count, | |
| dev_ofs(sb, cand->segno, 0)); | |
| cand = add_list(cand, &super->s_free_list); | |
| } | |
| } else { | |
| /* good candidates for Garbage Collection */ | |
| if (cand->valid < full) | |
| cand = add_list(cand, &super->s_low_list[cand->dist]); | |
| /* good candidates for wear leveling, | |
| * segments that were recently written get ignored */ | |
| if (cand) | |
| cand = add_list(cand, &super->s_ec_list); | |
| } | |
| if (cand) | |
| free_candidate(sb, cand); | |
| } | |
| static int add_candidate(struct super_block *sb, u32 segno, u32 valid, u32 ec, | |
| u8 dist) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| struct gc_candidate *cand; | |
| cand = kmalloc(sizeof(*cand), GFP_NOFS); | |
| if (!cand) | |
| return -ENOMEM; | |
| cand->segno = segno; | |
| cand->valid = valid; | |
| cand->erase_count = ec; | |
| cand->dist = dist; | |
| btree_insert32(&super->s_cand_tree, segno, cand, GFP_NOFS); | |
| __add_candidate(sb, cand); | |
| return 0; | |
| } | |
| static void remove_segment_from_lists(struct super_block *sb, u32 segno) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| struct gc_candidate *cand; | |
| cand = btree_lookup32(&super->s_cand_tree, segno); | |
| if (cand) { | |
| remove_from_list(cand); | |
| free_candidate(sb, cand); | |
| } | |
| } | |
| static void scan_segment(struct super_block *sb, u32 segno) | |
| { | |
| u32 valid, ec = 0; | |
| gc_level_t gc_level = 0; | |
| u8 dist; | |
| if (segment_is_reserved(sb, segno)) | |
| return; | |
| remove_segment_from_lists(sb, segno); | |
| valid = logfs_valid_bytes(sb, segno, &ec, &gc_level); | |
| if (valid == RESERVED) | |
| return; | |
| dist = root_distance(sb, gc_level); | |
| add_candidate(sb, segno, valid, ec, dist); | |
| } | |
| static struct gc_candidate *first_in_list(struct candidate_list *list) | |
| { | |
| if (list->count == 0) | |
| return NULL; | |
| return rb_entry(rb_first(&list->rb_tree), struct gc_candidate, rb_node); | |
| } | |
| /* | |
| * Find the best segment for garbage collection. Main criterion is | |
| * the segment requiring the least effort to clean. Secondary | |
| * criterion is to GC on the lowest level available. | |
| * | |
| * So we search the least effort segment on the lowest level first, | |
| * then move up and pick another segment iff is requires significantly | |
| * less effort. Hence the LOGFS_MAX_OBJECTSIZE in the comparison. | |
| */ | |
| static struct gc_candidate *get_candidate(struct super_block *sb) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| int i, max_dist; | |
| struct gc_candidate *cand = NULL, *this; | |
| max_dist = min(no_free_segments(sb), LOGFS_NO_AREAS - 1); | |
| for (i = max_dist; i >= 0; i--) { | |
| this = first_in_list(&super->s_low_list[i]); | |
| if (!this) | |
| continue; | |
| if (!cand) | |
| cand = this; | |
| if (this->valid + LOGFS_MAX_OBJECTSIZE <= cand->valid) | |
| cand = this; | |
| } | |
| return cand; | |
| } | |
| static int __logfs_gc_once(struct super_block *sb, struct gc_candidate *cand) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| gc_level_t gc_level; | |
| u32 cleaned, valid, segno, ec; | |
| u8 dist; | |
| if (!cand) { | |
| log_gc("GC attempted, but no candidate found\n"); | |
| return 0; | |
| } | |
| segno = cand->segno; | |
| dist = cand->dist; | |
| valid = logfs_valid_bytes(sb, segno, &ec, &gc_level); | |
| free_candidate(sb, cand); | |
| log_gc("GC segment #%02x at %llx, %x required, %x free, %x valid, %llx free\n", | |
| segno, (u64)segno << super->s_segshift, | |
| dist, no_free_segments(sb), valid, | |
| super->s_free_bytes); | |
| cleaned = logfs_gc_segment(sb, segno); | |
| log_gc("GC segment #%02x complete - now %x valid\n", segno, | |
| valid - cleaned); | |
| BUG_ON(cleaned != valid); | |
| return 1; | |
| } | |
| static int logfs_gc_once(struct super_block *sb) | |
| { | |
| struct gc_candidate *cand; | |
| cand = get_candidate(sb); | |
| if (cand) | |
| remove_from_list(cand); | |
| return __logfs_gc_once(sb, cand); | |
| } | |
| /* returns 1 if a wrap occurs, 0 otherwise */ | |
| static int logfs_scan_some(struct super_block *sb) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| u32 segno; | |
| int i, ret = 0; | |
| segno = super->s_sweeper; | |
| for (i = SCAN_RATIO; i > 0; i--) { | |
| segno++; | |
| if (segno >= super->s_no_segs) { | |
| segno = 0; | |
| ret = 1; | |
| /* Break out of the loop. We want to read a single | |
| * block from the segment size on next invocation if | |
| * SCAN_RATIO is set to match block size | |
| */ | |
| break; | |
| } | |
| scan_segment(sb, segno); | |
| } | |
| super->s_sweeper = segno; | |
| return ret; | |
| } | |
| /* | |
| * In principle, this function should loop forever, looking for GC candidates | |
| * and moving data. LogFS is designed in such a way that this loop is | |
| * guaranteed to terminate. | |
| * | |
| * Limiting the loop to some iterations serves purely to catch cases when | |
| * these guarantees have failed. An actual endless loop is an obvious bug | |
| * and should be reported as such. | |
| */ | |
| static void __logfs_gc_pass(struct super_block *sb, int target) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| struct logfs_block *block; | |
| int round, progress, last_progress = 0; | |
| /* | |
| * Doing too many changes to the segfile at once would result | |
| * in a large number of aliases. Write the journal before | |
| * things get out of hand. | |
| */ | |
| if (super->s_shadow_tree.no_shadowed_segments >= MAX_OBJ_ALIASES) | |
| logfs_write_anchor(sb); | |
| if (no_free_segments(sb) >= target && | |
| super->s_no_object_aliases < MAX_OBJ_ALIASES) | |
| return; | |
| log_gc("__logfs_gc_pass(%x)\n", target); | |
| for (round = 0; round < SCAN_ROUNDS; ) { | |
| if (no_free_segments(sb) >= target) | |
| goto write_alias; | |
| /* Sync in-memory state with on-medium state in case they | |
| * diverged */ | |
| logfs_write_anchor(sb); | |
| round += logfs_scan_some(sb); | |
| if (no_free_segments(sb) >= target) | |
| goto write_alias; | |
| progress = logfs_gc_once(sb); | |
| if (progress) | |
| last_progress = round; | |
| else if (round - last_progress > 2) | |
| break; | |
| continue; | |
| /* | |
| * The goto logic is nasty, I just don't know a better way to | |
| * code it. GC is supposed to ensure two things: | |
| * 1. Enough free segments are available. | |
| * 2. The number of aliases is bounded. | |
| * When 1. is achieved, we take a look at 2. and write back | |
| * some alias-containing blocks, if necessary. However, after | |
| * each such write we need to go back to 1., as writes can | |
| * consume free segments. | |
| */ | |
| write_alias: | |
| if (super->s_no_object_aliases < MAX_OBJ_ALIASES) | |
| return; | |
| if (list_empty(&super->s_object_alias)) { | |
| /* All aliases are still in btree */ | |
| return; | |
| } | |
| log_gc("Write back one alias\n"); | |
| block = list_entry(super->s_object_alias.next, | |
| struct logfs_block, alias_list); | |
| block->ops->write_block(block); | |
| /* | |
| * To round off the nasty goto logic, we reset round here. It | |
| * is a safety-net for GC not making any progress and limited | |
| * to something reasonably small. If incremented it for every | |
| * single alias, the loop could terminate rather quickly. | |
| */ | |
| round = 0; | |
| } | |
| LOGFS_BUG(sb); | |
| } | |
| static int wl_ratelimit(struct super_block *sb, u64 *next_event) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| if (*next_event < super->s_gec) { | |
| *next_event = super->s_gec + WL_RATELIMIT; | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static void logfs_wl_pass(struct super_block *sb) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| struct gc_candidate *wl_cand, *free_cand; | |
| if (wl_ratelimit(sb, &super->s_wl_gec_ostore)) | |
| return; | |
| wl_cand = first_in_list(&super->s_ec_list); | |
| if (!wl_cand) | |
| return; | |
| free_cand = first_in_list(&super->s_free_list); | |
| if (!free_cand) | |
| return; | |
| if (wl_cand->erase_count < free_cand->erase_count + WL_DELTA) { | |
| remove_from_list(wl_cand); | |
| __logfs_gc_once(sb, wl_cand); | |
| } | |
| } | |
| /* | |
| * The journal needs wear leveling as well. But moving the journal is an | |
| * expensive operation so we try to avoid it as much as possible. And if we | |
| * have to do it, we move the whole journal, not individual segments. | |
| * | |
| * Ratelimiting is not strictly necessary here, it mainly serves to avoid the | |
| * calculations. First we check whether moving the journal would be a | |
| * significant improvement. That means that a) the current journal segments | |
| * have more wear than the future journal segments and b) the current journal | |
| * segments have more wear than normal ostore segments. | |
| * Rationale for b) is that we don't have to move the journal if it is aging | |
| * less than the ostore, even if the reserve segments age even less (they are | |
| * excluded from wear leveling, after all). | |
| * Next we check that the superblocks have less wear than the journal. Since | |
| * moving the journal requires writing the superblocks, we have to protect the | |
| * superblocks even more than the journal. | |
| * | |
| * Also we double the acceptable wear difference, compared to ostore wear | |
| * leveling. Journal data is read and rewritten rapidly, comparatively. So | |
| * soft errors have much less time to accumulate and we allow the journal to | |
| * be a bit worse than the ostore. | |
| */ | |
| static void logfs_journal_wl_pass(struct super_block *sb) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| struct gc_candidate *cand; | |
| u32 min_journal_ec = -1, max_reserve_ec = 0; | |
| int i; | |
| if (wl_ratelimit(sb, &super->s_wl_gec_journal)) | |
| return; | |
| if (super->s_reserve_list.count < super->s_no_journal_segs) { | |
| /* Reserve is not full enough to move complete journal */ | |
| return; | |
| } | |
| journal_for_each(i) | |
| if (super->s_journal_seg[i]) | |
| min_journal_ec = min(min_journal_ec, | |
| super->s_journal_ec[i]); | |
| cand = rb_entry(rb_first(&super->s_free_list.rb_tree), | |
| struct gc_candidate, rb_node); | |
| max_reserve_ec = cand->erase_count; | |
| for (i = 0; i < 2; i++) { | |
| struct logfs_segment_entry se; | |
| u32 segno = seg_no(sb, super->s_sb_ofs[i]); | |
| u32 ec; | |
| logfs_get_segment_entry(sb, segno, &se); | |
| ec = be32_to_cpu(se.ec_level) >> 4; | |
| max_reserve_ec = max(max_reserve_ec, ec); | |
| } | |
| if (min_journal_ec > max_reserve_ec + 2 * WL_DELTA) { | |
| do_logfs_journal_wl_pass(sb); | |
| } | |
| } | |
| void logfs_gc_pass(struct super_block *sb) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| //BUG_ON(mutex_trylock(&logfs_super(sb)->s_w_mutex)); | |
| /* Write journal before free space is getting saturated with dirty | |
| * objects. | |
| */ | |
| if (super->s_dirty_used_bytes + super->s_dirty_free_bytes | |
| + LOGFS_MAX_OBJECTSIZE >= super->s_free_bytes) | |
| logfs_write_anchor(sb); | |
| __logfs_gc_pass(sb, super->s_total_levels); | |
| logfs_wl_pass(sb); | |
| logfs_journal_wl_pass(sb); | |
| } | |
| static int check_area(struct super_block *sb, int i) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| struct logfs_area *area = super->s_area[i]; | |
| gc_level_t gc_level; | |
| u32 cleaned, valid, ec; | |
| u32 segno = area->a_segno; | |
| u64 ofs = dev_ofs(sb, area->a_segno, area->a_written_bytes); | |
| if (!area->a_is_open) | |
| return 0; | |
| if (super->s_devops->can_write_buf(sb, ofs) == 0) | |
| return 0; | |
| printk(KERN_INFO"LogFS: Possibly incomplete write at %llx\n", ofs); | |
| /* | |
| * The device cannot write back the write buffer. Most likely the | |
| * wbuf was already written out and the system crashed at some point | |
| * before the journal commit happened. In that case we wouldn't have | |
| * to do anything. But if the crash happened before the wbuf was | |
| * written out correctly, we must GC this segment. So assume the | |
| * worst and always do the GC run. | |
| */ | |
| area->a_is_open = 0; | |
| valid = logfs_valid_bytes(sb, segno, &ec, &gc_level); | |
| cleaned = logfs_gc_segment(sb, segno); | |
| if (cleaned != valid) | |
| return -EIO; | |
| return 0; | |
| } | |
| int logfs_check_areas(struct super_block *sb) | |
| { | |
| int i, err; | |
| for_each_area(i) { | |
| err = check_area(sb, i); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void logfs_init_candlist(struct candidate_list *list, int maxcount, | |
| int sort_by_ec) | |
| { | |
| list->count = 0; | |
| list->maxcount = maxcount; | |
| list->sort_by_ec = sort_by_ec; | |
| list->rb_tree = RB_ROOT; | |
| } | |
| int logfs_init_gc(struct super_block *sb) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| int i; | |
| btree_init_mempool32(&super->s_cand_tree, super->s_btree_pool); | |
| logfs_init_candlist(&super->s_free_list, LIST_SIZE + SCAN_RATIO, 1); | |
| logfs_init_candlist(&super->s_reserve_list, | |
| super->s_bad_seg_reserve, 1); | |
| for_each_area(i) | |
| logfs_init_candlist(&super->s_low_list[i], LIST_SIZE, 0); | |
| logfs_init_candlist(&super->s_ec_list, LIST_SIZE, 1); | |
| return 0; | |
| } | |
| static void logfs_cleanup_list(struct super_block *sb, | |
| struct candidate_list *list) | |
| { | |
| struct gc_candidate *cand; | |
| while (list->count) { | |
| cand = rb_entry(list->rb_tree.rb_node, struct gc_candidate, | |
| rb_node); | |
| remove_from_list(cand); | |
| free_candidate(sb, cand); | |
| } | |
| BUG_ON(list->rb_tree.rb_node); | |
| } | |
| void logfs_cleanup_gc(struct super_block *sb) | |
| { | |
| struct logfs_super *super = logfs_super(sb); | |
| int i; | |
| if (!super->s_free_list.count) | |
| return; | |
| /* | |
| * FIXME: The btree may still contain a single empty node. So we | |
| * call the grim visitor to clean up that mess. Btree code should | |
| * do it for us, really. | |
| */ | |
| btree_grim_visitor32(&super->s_cand_tree, 0, NULL); | |
| logfs_cleanup_list(sb, &super->s_free_list); | |
| logfs_cleanup_list(sb, &super->s_reserve_list); | |
| for_each_area(i) | |
| logfs_cleanup_list(sb, &super->s_low_list[i]); | |
| logfs_cleanup_list(sb, &super->s_ec_list); | |
| } |