| /* | |
| * This file is part of UBIFS. | |
| * | |
| * Copyright (C) 2006-2008 Nokia Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published by | |
| * the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| * You should have received a copy of the GNU General Public License along with | |
| * this program; if not, write to the Free Software Foundation, Inc., 51 | |
| * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| * | |
| * Authors: Artem Bityutskiy (Битюцкий Артём) | |
| * Adrian Hunter | |
| */ | |
| /* | |
| * This file implements UBIFS journal. | |
| * | |
| * The journal consists of 2 parts - the log and bud LEBs. The log has fixed | |
| * length and position, while a bud logical eraseblock is any LEB in the main | |
| * area. Buds contain file system data - data nodes, inode nodes, etc. The log | |
| * contains only references to buds and some other stuff like commit | |
| * start node. The idea is that when we commit the journal, we do | |
| * not copy the data, the buds just become indexed. Since after the commit the | |
| * nodes in bud eraseblocks become leaf nodes of the file system index tree, we | |
| * use term "bud". Analogy is obvious, bud eraseblocks contain nodes which will | |
| * become leafs in the future. | |
| * | |
| * The journal is multi-headed because we want to write data to the journal as | |
| * optimally as possible. It is nice to have nodes belonging to the same inode | |
| * in one LEB, so we may write data owned by different inodes to different | |
| * journal heads, although at present only one data head is used. | |
| * | |
| * For recovery reasons, the base head contains all inode nodes, all directory | |
| * entry nodes and all truncate nodes. This means that the other heads contain | |
| * only data nodes. | |
| * | |
| * Bud LEBs may be half-indexed. For example, if the bud was not full at the | |
| * time of commit, the bud is retained to continue to be used in the journal, | |
| * even though the "front" of the LEB is now indexed. In that case, the log | |
| * reference contains the offset where the bud starts for the purposes of the | |
| * journal. | |
| * | |
| * The journal size has to be limited, because the larger is the journal, the | |
| * longer it takes to mount UBIFS (scanning the journal) and the more memory it | |
| * takes (indexing in the TNC). | |
| * | |
| * All the journal write operations like 'ubifs_jnl_update()' here, which write | |
| * multiple UBIFS nodes to the journal at one go, are atomic with respect to | |
| * unclean reboots. Should the unclean reboot happen, the recovery code drops | |
| * all the nodes. | |
| */ | |
| #include "ubifs.h" | |
| /** | |
| * zero_ino_node_unused - zero out unused fields of an on-flash inode node. | |
| * @ino: the inode to zero out | |
| */ | |
| static inline void zero_ino_node_unused(struct ubifs_ino_node *ino) | |
| { | |
| memset(ino->padding1, 0, 4); | |
| memset(ino->padding2, 0, 26); | |
| } | |
| /** | |
| * zero_dent_node_unused - zero out unused fields of an on-flash directory | |
| * entry node. | |
| * @dent: the directory entry to zero out | |
| */ | |
| static inline void zero_dent_node_unused(struct ubifs_dent_node *dent) | |
| { | |
| dent->padding1 = 0; | |
| memset(dent->padding2, 0, 4); | |
| } | |
| /** | |
| * zero_data_node_unused - zero out unused fields of an on-flash data node. | |
| * @data: the data node to zero out | |
| */ | |
| static inline void zero_data_node_unused(struct ubifs_data_node *data) | |
| { | |
| memset(data->padding, 0, 2); | |
| } | |
| /** | |
| * zero_trun_node_unused - zero out unused fields of an on-flash truncation | |
| * node. | |
| * @trun: the truncation node to zero out | |
| */ | |
| static inline void zero_trun_node_unused(struct ubifs_trun_node *trun) | |
| { | |
| memset(trun->padding, 0, 12); | |
| } | |
| /** | |
| * reserve_space - reserve space in the journal. | |
| * @c: UBIFS file-system description object | |
| * @jhead: journal head number | |
| * @len: node length | |
| * | |
| * This function reserves space in journal head @head. If the reservation | |
| * succeeded, the journal head stays locked and later has to be unlocked using | |
| * 'release_head()'. 'write_node()' and 'write_head()' functions also unlock | |
| * it. Returns zero in case of success, %-EAGAIN if commit has to be done, and | |
| * other negative error codes in case of other failures. | |
| */ | |
| static int reserve_space(struct ubifs_info *c, int jhead, int len) | |
| { | |
| int err = 0, err1, retries = 0, avail, lnum, offs, squeeze; | |
| struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; | |
| /* | |
| * Typically, the base head has smaller nodes written to it, so it is | |
| * better to try to allocate space at the ends of eraseblocks. This is | |
| * what the squeeze parameter does. | |
| */ | |
| ubifs_assert(!c->ro_media && !c->ro_mount); | |
| squeeze = (jhead == BASEHD); | |
| again: | |
| mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); | |
| if (c->ro_error) { | |
| err = -EROFS; | |
| goto out_unlock; | |
| } | |
| avail = c->leb_size - wbuf->offs - wbuf->used; | |
| if (wbuf->lnum != -1 && avail >= len) | |
| return 0; | |
| /* | |
| * Write buffer wasn't seek'ed or there is no enough space - look for an | |
| * LEB with some empty space. | |
| */ | |
| lnum = ubifs_find_free_space(c, len, &offs, squeeze); | |
| if (lnum >= 0) | |
| goto out; | |
| err = lnum; | |
| if (err != -ENOSPC) | |
| goto out_unlock; | |
| /* | |
| * No free space, we have to run garbage collector to make | |
| * some. But the write-buffer mutex has to be unlocked because | |
| * GC also takes it. | |
| */ | |
| dbg_jnl("no free space in jhead %s, run GC", dbg_jhead(jhead)); | |
| mutex_unlock(&wbuf->io_mutex); | |
| lnum = ubifs_garbage_collect(c, 0); | |
| if (lnum < 0) { | |
| err = lnum; | |
| if (err != -ENOSPC) | |
| return err; | |
| /* | |
| * GC could not make a free LEB. But someone else may | |
| * have allocated new bud for this journal head, | |
| * because we dropped @wbuf->io_mutex, so try once | |
| * again. | |
| */ | |
| dbg_jnl("GC couldn't make a free LEB for jhead %s", | |
| dbg_jhead(jhead)); | |
| if (retries++ < 2) { | |
| dbg_jnl("retry (%d)", retries); | |
| goto again; | |
| } | |
| dbg_jnl("return -ENOSPC"); | |
| return err; | |
| } | |
| mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); | |
| dbg_jnl("got LEB %d for jhead %s", lnum, dbg_jhead(jhead)); | |
| avail = c->leb_size - wbuf->offs - wbuf->used; | |
| if (wbuf->lnum != -1 && avail >= len) { | |
| /* | |
| * Someone else has switched the journal head and we have | |
| * enough space now. This happens when more than one process is | |
| * trying to write to the same journal head at the same time. | |
| */ | |
| dbg_jnl("return LEB %d back, already have LEB %d:%d", | |
| lnum, wbuf->lnum, wbuf->offs + wbuf->used); | |
| err = ubifs_return_leb(c, lnum); | |
| if (err) | |
| goto out_unlock; | |
| return 0; | |
| } | |
| offs = 0; | |
| out: | |
| /* | |
| * Make sure we synchronize the write-buffer before we add the new bud | |
| * to the log. Otherwise we may have a power cut after the log | |
| * reference node for the last bud (@lnum) is written but before the | |
| * write-buffer data are written to the next-to-last bud | |
| * (@wbuf->lnum). And the effect would be that the recovery would see | |
| * that there is corruption in the next-to-last bud. | |
| */ | |
| err = ubifs_wbuf_sync_nolock(wbuf); | |
| if (err) | |
| goto out_return; | |
| err = ubifs_add_bud_to_log(c, jhead, lnum, offs); | |
| if (err) | |
| goto out_return; | |
| err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs); | |
| if (err) | |
| goto out_unlock; | |
| return 0; | |
| out_unlock: | |
| mutex_unlock(&wbuf->io_mutex); | |
| return err; | |
| out_return: | |
| /* An error occurred and the LEB has to be returned to lprops */ | |
| ubifs_assert(err < 0); | |
| err1 = ubifs_return_leb(c, lnum); | |
| if (err1 && err == -EAGAIN) | |
| /* | |
| * Return original error code only if it is not %-EAGAIN, | |
| * which is not really an error. Otherwise, return the error | |
| * code of 'ubifs_return_leb()'. | |
| */ | |
| err = err1; | |
| mutex_unlock(&wbuf->io_mutex); | |
| return err; | |
| } | |
| /** | |
| * write_node - write node to a journal head. | |
| * @c: UBIFS file-system description object | |
| * @jhead: journal head | |
| * @node: node to write | |
| * @len: node length | |
| * @lnum: LEB number written is returned here | |
| * @offs: offset written is returned here | |
| * | |
| * This function writes a node to reserved space of journal head @jhead. | |
| * Returns zero in case of success and a negative error code in case of | |
| * failure. | |
| */ | |
| static int write_node(struct ubifs_info *c, int jhead, void *node, int len, | |
| int *lnum, int *offs) | |
| { | |
| struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; | |
| ubifs_assert(jhead != GCHD); | |
| *lnum = c->jheads[jhead].wbuf.lnum; | |
| *offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used; | |
| dbg_jnl("jhead %s, LEB %d:%d, len %d", | |
| dbg_jhead(jhead), *lnum, *offs, len); | |
| ubifs_prepare_node(c, node, len, 0); | |
| return ubifs_wbuf_write_nolock(wbuf, node, len); | |
| } | |
| /** | |
| * write_head - write data to a journal head. | |
| * @c: UBIFS file-system description object | |
| * @jhead: journal head | |
| * @buf: buffer to write | |
| * @len: length to write | |
| * @lnum: LEB number written is returned here | |
| * @offs: offset written is returned here | |
| * @sync: non-zero if the write-buffer has to by synchronized | |
| * | |
| * This function is the same as 'write_node()' but it does not assume the | |
| * buffer it is writing is a node, so it does not prepare it (which means | |
| * initializing common header and calculating CRC). | |
| */ | |
| static int write_head(struct ubifs_info *c, int jhead, void *buf, int len, | |
| int *lnum, int *offs, int sync) | |
| { | |
| int err; | |
| struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; | |
| ubifs_assert(jhead != GCHD); | |
| *lnum = c->jheads[jhead].wbuf.lnum; | |
| *offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used; | |
| dbg_jnl("jhead %s, LEB %d:%d, len %d", | |
| dbg_jhead(jhead), *lnum, *offs, len); | |
| err = ubifs_wbuf_write_nolock(wbuf, buf, len); | |
| if (err) | |
| return err; | |
| if (sync) | |
| err = ubifs_wbuf_sync_nolock(wbuf); | |
| return err; | |
| } | |
| /** | |
| * make_reservation - reserve journal space. | |
| * @c: UBIFS file-system description object | |
| * @jhead: journal head | |
| * @len: how many bytes to reserve | |
| * | |
| * This function makes space reservation in journal head @jhead. The function | |
| * takes the commit lock and locks the journal head, and the caller has to | |
| * unlock the head and finish the reservation with 'finish_reservation()'. | |
| * Returns zero in case of success and a negative error code in case of | |
| * failure. | |
| * | |
| * Note, the journal head may be unlocked as soon as the data is written, while | |
| * the commit lock has to be released after the data has been added to the | |
| * TNC. | |
| */ | |
| static int make_reservation(struct ubifs_info *c, int jhead, int len) | |
| { | |
| int err, cmt_retries = 0, nospc_retries = 0; | |
| again: | |
| down_read(&c->commit_sem); | |
| err = reserve_space(c, jhead, len); | |
| if (!err) | |
| return 0; | |
| up_read(&c->commit_sem); | |
| if (err == -ENOSPC) { | |
| /* | |
| * GC could not make any progress. We should try to commit | |
| * once because it could make some dirty space and GC would | |
| * make progress, so make the error -EAGAIN so that the below | |
| * will commit and re-try. | |
| */ | |
| if (nospc_retries++ < 2) { | |
| dbg_jnl("no space, retry"); | |
| err = -EAGAIN; | |
| } | |
| /* | |
| * This means that the budgeting is incorrect. We always have | |
| * to be able to write to the media, because all operations are | |
| * budgeted. Deletions are not budgeted, though, but we reserve | |
| * an extra LEB for them. | |
| */ | |
| } | |
| if (err != -EAGAIN) | |
| goto out; | |
| /* | |
| * -EAGAIN means that the journal is full or too large, or the above | |
| * code wants to do one commit. Do this and re-try. | |
| */ | |
| if (cmt_retries > 128) { | |
| /* | |
| * This should not happen unless the journal size limitations | |
| * are too tough. | |
| */ | |
| ubifs_err(c, "stuck in space allocation"); | |
| err = -ENOSPC; | |
| goto out; | |
| } else if (cmt_retries > 32) | |
| ubifs_warn(c, "too many space allocation re-tries (%d)", | |
| cmt_retries); | |
| dbg_jnl("-EAGAIN, commit and retry (retried %d times)", | |
| cmt_retries); | |
| cmt_retries += 1; | |
| err = ubifs_run_commit(c); | |
| if (err) | |
| return err; | |
| goto again; | |
| out: | |
| ubifs_err(c, "cannot reserve %d bytes in jhead %d, error %d", | |
| len, jhead, err); | |
| if (err == -ENOSPC) { | |
| /* This are some budgeting problems, print useful information */ | |
| down_write(&c->commit_sem); | |
| dump_stack(); | |
| ubifs_dump_budg(c, &c->bi); | |
| ubifs_dump_lprops(c); | |
| cmt_retries = dbg_check_lprops(c); | |
| up_write(&c->commit_sem); | |
| } | |
| return err; | |
| } | |
| /** | |
| * release_head - release a journal head. | |
| * @c: UBIFS file-system description object | |
| * @jhead: journal head | |
| * | |
| * This function releases journal head @jhead which was locked by | |
| * the 'make_reservation()' function. It has to be called after each successful | |
| * 'make_reservation()' invocation. | |
| */ | |
| static inline void release_head(struct ubifs_info *c, int jhead) | |
| { | |
| mutex_unlock(&c->jheads[jhead].wbuf.io_mutex); | |
| } | |
| /** | |
| * finish_reservation - finish a reservation. | |
| * @c: UBIFS file-system description object | |
| * | |
| * This function finishes journal space reservation. It must be called after | |
| * 'make_reservation()'. | |
| */ | |
| static void finish_reservation(struct ubifs_info *c) | |
| { | |
| up_read(&c->commit_sem); | |
| } | |
| /** | |
| * get_dent_type - translate VFS inode mode to UBIFS directory entry type. | |
| * @mode: inode mode | |
| */ | |
| static int get_dent_type(int mode) | |
| { | |
| switch (mode & S_IFMT) { | |
| case S_IFREG: | |
| return UBIFS_ITYPE_REG; | |
| case S_IFDIR: | |
| return UBIFS_ITYPE_DIR; | |
| case S_IFLNK: | |
| return UBIFS_ITYPE_LNK; | |
| case S_IFBLK: | |
| return UBIFS_ITYPE_BLK; | |
| case S_IFCHR: | |
| return UBIFS_ITYPE_CHR; | |
| case S_IFIFO: | |
| return UBIFS_ITYPE_FIFO; | |
| case S_IFSOCK: | |
| return UBIFS_ITYPE_SOCK; | |
| default: | |
| BUG(); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * pack_inode - pack an inode node. | |
| * @c: UBIFS file-system description object | |
| * @ino: buffer in which to pack inode node | |
| * @inode: inode to pack | |
| * @last: indicates the last node of the group | |
| */ | |
| static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino, | |
| const struct inode *inode, int last) | |
| { | |
| int data_len = 0, last_reference = !inode->i_nlink; | |
| struct ubifs_inode *ui = ubifs_inode(inode); | |
| ino->ch.node_type = UBIFS_INO_NODE; | |
| ino_key_init_flash(c, &ino->key, inode->i_ino); | |
| ino->creat_sqnum = cpu_to_le64(ui->creat_sqnum); | |
| ino->atime_sec = cpu_to_le64(inode->i_atime.tv_sec); | |
| ino->atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec); | |
| ino->ctime_sec = cpu_to_le64(inode->i_ctime.tv_sec); | |
| ino->ctime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec); | |
| ino->mtime_sec = cpu_to_le64(inode->i_mtime.tv_sec); | |
| ino->mtime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec); | |
| ino->uid = cpu_to_le32(i_uid_read(inode)); | |
| ino->gid = cpu_to_le32(i_gid_read(inode)); | |
| ino->mode = cpu_to_le32(inode->i_mode); | |
| ino->flags = cpu_to_le32(ui->flags); | |
| ino->size = cpu_to_le64(ui->ui_size); | |
| ino->nlink = cpu_to_le32(inode->i_nlink); | |
| ino->compr_type = cpu_to_le16(ui->compr_type); | |
| ino->data_len = cpu_to_le32(ui->data_len); | |
| ino->xattr_cnt = cpu_to_le32(ui->xattr_cnt); | |
| ino->xattr_size = cpu_to_le32(ui->xattr_size); | |
| ino->xattr_names = cpu_to_le32(ui->xattr_names); | |
| zero_ino_node_unused(ino); | |
| /* | |
| * Drop the attached data if this is a deletion inode, the data is not | |
| * needed anymore. | |
| */ | |
| if (!last_reference) { | |
| memcpy(ino->data, ui->data, ui->data_len); | |
| data_len = ui->data_len; | |
| } | |
| ubifs_prep_grp_node(c, ino, UBIFS_INO_NODE_SZ + data_len, last); | |
| } | |
| /** | |
| * mark_inode_clean - mark UBIFS inode as clean. | |
| * @c: UBIFS file-system description object | |
| * @ui: UBIFS inode to mark as clean | |
| * | |
| * This helper function marks UBIFS inode @ui as clean by cleaning the | |
| * @ui->dirty flag and releasing its budget. Note, VFS may still treat the | |
| * inode as dirty and try to write it back, but 'ubifs_write_inode()' would | |
| * just do nothing. | |
| */ | |
| static void mark_inode_clean(struct ubifs_info *c, struct ubifs_inode *ui) | |
| { | |
| if (ui->dirty) | |
| ubifs_release_dirty_inode_budget(c, ui); | |
| ui->dirty = 0; | |
| } | |
| /** | |
| * ubifs_jnl_update - update inode. | |
| * @c: UBIFS file-system description object | |
| * @dir: parent inode or host inode in case of extended attributes | |
| * @nm: directory entry name | |
| * @inode: inode to update | |
| * @deletion: indicates a directory entry deletion i.e unlink or rmdir | |
| * @xent: non-zero if the directory entry is an extended attribute entry | |
| * | |
| * This function updates an inode by writing a directory entry (or extended | |
| * attribute entry), the inode itself, and the parent directory inode (or the | |
| * host inode) to the journal. | |
| * | |
| * The function writes the host inode @dir last, which is important in case of | |
| * extended attributes. Indeed, then we guarantee that if the host inode gets | |
| * synchronized (with 'fsync()'), and the write-buffer it sits in gets flushed, | |
| * the extended attribute inode gets flushed too. And this is exactly what the | |
| * user expects - synchronizing the host inode synchronizes its extended | |
| * attributes. Similarly, this guarantees that if @dir is synchronized, its | |
| * directory entry corresponding to @nm gets synchronized too. | |
| * | |
| * If the inode (@inode) or the parent directory (@dir) are synchronous, this | |
| * function synchronizes the write-buffer. | |
| * | |
| * This function marks the @dir and @inode inodes as clean and returns zero on | |
| * success. In case of failure, a negative error code is returned. | |
| */ | |
| int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir, | |
| const struct qstr *nm, const struct inode *inode, | |
| int deletion, int xent) | |
| { | |
| int err, dlen, ilen, len, lnum, ino_offs, dent_offs; | |
| int aligned_dlen, aligned_ilen, sync = IS_DIRSYNC(dir); | |
| int last_reference = !!(deletion && inode->i_nlink == 0); | |
| struct ubifs_inode *ui = ubifs_inode(inode); | |
| struct ubifs_inode *host_ui = ubifs_inode(dir); | |
| struct ubifs_dent_node *dent; | |
| struct ubifs_ino_node *ino; | |
| union ubifs_key dent_key, ino_key; | |
| dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu", | |
| inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino); | |
| ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); | |
| dlen = UBIFS_DENT_NODE_SZ + nm->len + 1; | |
| ilen = UBIFS_INO_NODE_SZ; | |
| /* | |
| * If the last reference to the inode is being deleted, then there is | |
| * no need to attach and write inode data, it is being deleted anyway. | |
| * And if the inode is being deleted, no need to synchronize | |
| * write-buffer even if the inode is synchronous. | |
| */ | |
| if (!last_reference) { | |
| ilen += ui->data_len; | |
| sync |= IS_SYNC(inode); | |
| } | |
| aligned_dlen = ALIGN(dlen, 8); | |
| aligned_ilen = ALIGN(ilen, 8); | |
| len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ; | |
| /* Make sure to also account for extended attributes */ | |
| len += host_ui->data_len; | |
| dent = kmalloc(len, GFP_NOFS); | |
| if (!dent) | |
| return -ENOMEM; | |
| /* Make reservation before allocating sequence numbers */ | |
| err = make_reservation(c, BASEHD, len); | |
| if (err) | |
| goto out_free; | |
| if (!xent) { | |
| dent->ch.node_type = UBIFS_DENT_NODE; | |
| dent_key_init(c, &dent_key, dir->i_ino, nm); | |
| } else { | |
| dent->ch.node_type = UBIFS_XENT_NODE; | |
| xent_key_init(c, &dent_key, dir->i_ino, nm); | |
| } | |
| key_write(c, &dent_key, dent->key); | |
| dent->inum = deletion ? 0 : cpu_to_le64(inode->i_ino); | |
| dent->type = get_dent_type(inode->i_mode); | |
| dent->nlen = cpu_to_le16(nm->len); | |
| memcpy(dent->name, nm->name, nm->len); | |
| dent->name[nm->len] = '\0'; | |
| zero_dent_node_unused(dent); | |
| ubifs_prep_grp_node(c, dent, dlen, 0); | |
| ino = (void *)dent + aligned_dlen; | |
| pack_inode(c, ino, inode, 0); | |
| ino = (void *)ino + aligned_ilen; | |
| pack_inode(c, ino, dir, 1); | |
| if (last_reference) { | |
| err = ubifs_add_orphan(c, inode->i_ino); | |
| if (err) { | |
| release_head(c, BASEHD); | |
| goto out_finish; | |
| } | |
| ui->del_cmtno = c->cmt_no; | |
| } | |
| err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync); | |
| if (err) | |
| goto out_release; | |
| if (!sync) { | |
| struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; | |
| ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino); | |
| ubifs_wbuf_add_ino_nolock(wbuf, dir->i_ino); | |
| } | |
| release_head(c, BASEHD); | |
| kfree(dent); | |
| if (deletion) { | |
| err = ubifs_tnc_remove_nm(c, &dent_key, nm); | |
| if (err) | |
| goto out_ro; | |
| err = ubifs_add_dirt(c, lnum, dlen); | |
| } else | |
| err = ubifs_tnc_add_nm(c, &dent_key, lnum, dent_offs, dlen, nm); | |
| if (err) | |
| goto out_ro; | |
| /* | |
| * Note, we do not remove the inode from TNC even if the last reference | |
| * to it has just been deleted, because the inode may still be opened. | |
| * Instead, the inode has been added to orphan lists and the orphan | |
| * subsystem will take further care about it. | |
| */ | |
| ino_key_init(c, &ino_key, inode->i_ino); | |
| ino_offs = dent_offs + aligned_dlen; | |
| err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, ilen); | |
| if (err) | |
| goto out_ro; | |
| ino_key_init(c, &ino_key, dir->i_ino); | |
| ino_offs += aligned_ilen; | |
| err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, | |
| UBIFS_INO_NODE_SZ + host_ui->data_len); | |
| if (err) | |
| goto out_ro; | |
| finish_reservation(c); | |
| spin_lock(&ui->ui_lock); | |
| ui->synced_i_size = ui->ui_size; | |
| spin_unlock(&ui->ui_lock); | |
| mark_inode_clean(c, ui); | |
| mark_inode_clean(c, host_ui); | |
| return 0; | |
| out_finish: | |
| finish_reservation(c); | |
| out_free: | |
| kfree(dent); | |
| return err; | |
| out_release: | |
| release_head(c, BASEHD); | |
| kfree(dent); | |
| out_ro: | |
| ubifs_ro_mode(c, err); | |
| if (last_reference) | |
| ubifs_delete_orphan(c, inode->i_ino); | |
| finish_reservation(c); | |
| return err; | |
| } | |
| /** | |
| * ubifs_jnl_write_data - write a data node to the journal. | |
| * @c: UBIFS file-system description object | |
| * @inode: inode the data node belongs to | |
| * @key: node key | |
| * @buf: buffer to write | |
| * @len: data length (must not exceed %UBIFS_BLOCK_SIZE) | |
| * | |
| * This function writes a data node to the journal. Returns %0 if the data node | |
| * was successfully written, and a negative error code in case of failure. | |
| */ | |
| int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode, | |
| const union ubifs_key *key, const void *buf, int len) | |
| { | |
| struct ubifs_data_node *data; | |
| int err, lnum, offs, compr_type, out_len; | |
| int dlen = COMPRESSED_DATA_NODE_BUF_SZ, allocated = 1; | |
| struct ubifs_inode *ui = ubifs_inode(inode); | |
| dbg_jnlk(key, "ino %lu, blk %u, len %d, key ", | |
| (unsigned long)key_inum(c, key), key_block(c, key), len); | |
| ubifs_assert(len <= UBIFS_BLOCK_SIZE); | |
| data = kmalloc(dlen, GFP_NOFS | __GFP_NOWARN); | |
| if (!data) { | |
| /* | |
| * Fall-back to the write reserve buffer. Note, we might be | |
| * currently on the memory reclaim path, when the kernel is | |
| * trying to free some memory by writing out dirty pages. The | |
| * write reserve buffer helps us to guarantee that we are | |
| * always able to write the data. | |
| */ | |
| allocated = 0; | |
| mutex_lock(&c->write_reserve_mutex); | |
| data = c->write_reserve_buf; | |
| } | |
| data->ch.node_type = UBIFS_DATA_NODE; | |
| key_write(c, key, &data->key); | |
| data->size = cpu_to_le32(len); | |
| zero_data_node_unused(data); | |
| if (!(ui->flags & UBIFS_COMPR_FL)) | |
| /* Compression is disabled for this inode */ | |
| compr_type = UBIFS_COMPR_NONE; | |
| else | |
| compr_type = ui->compr_type; | |
| out_len = dlen - UBIFS_DATA_NODE_SZ; | |
| ubifs_compress(c, buf, len, &data->data, &out_len, &compr_type); | |
| ubifs_assert(out_len <= UBIFS_BLOCK_SIZE); | |
| dlen = UBIFS_DATA_NODE_SZ + out_len; | |
| data->compr_type = cpu_to_le16(compr_type); | |
| /* Make reservation before allocating sequence numbers */ | |
| err = make_reservation(c, DATAHD, dlen); | |
| if (err) | |
| goto out_free; | |
| err = write_node(c, DATAHD, data, dlen, &lnum, &offs); | |
| if (err) | |
| goto out_release; | |
| ubifs_wbuf_add_ino_nolock(&c->jheads[DATAHD].wbuf, key_inum(c, key)); | |
| release_head(c, DATAHD); | |
| err = ubifs_tnc_add(c, key, lnum, offs, dlen); | |
| if (err) | |
| goto out_ro; | |
| finish_reservation(c); | |
| if (!allocated) | |
| mutex_unlock(&c->write_reserve_mutex); | |
| else | |
| kfree(data); | |
| return 0; | |
| out_release: | |
| release_head(c, DATAHD); | |
| out_ro: | |
| ubifs_ro_mode(c, err); | |
| finish_reservation(c); | |
| out_free: | |
| if (!allocated) | |
| mutex_unlock(&c->write_reserve_mutex); | |
| else | |
| kfree(data); | |
| return err; | |
| } | |
| /** | |
| * ubifs_jnl_write_inode - flush inode to the journal. | |
| * @c: UBIFS file-system description object | |
| * @inode: inode to flush | |
| * | |
| * This function writes inode @inode to the journal. If the inode is | |
| * synchronous, it also synchronizes the write-buffer. Returns zero in case of | |
| * success and a negative error code in case of failure. | |
| */ | |
| int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode) | |
| { | |
| int err, lnum, offs; | |
| struct ubifs_ino_node *ino; | |
| struct ubifs_inode *ui = ubifs_inode(inode); | |
| int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink; | |
| dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink); | |
| /* | |
| * If the inode is being deleted, do not write the attached data. No | |
| * need to synchronize the write-buffer either. | |
| */ | |
| if (!last_reference) { | |
| len += ui->data_len; | |
| sync = IS_SYNC(inode); | |
| } | |
| ino = kmalloc(len, GFP_NOFS); | |
| if (!ino) | |
| return -ENOMEM; | |
| /* Make reservation before allocating sequence numbers */ | |
| err = make_reservation(c, BASEHD, len); | |
| if (err) | |
| goto out_free; | |
| pack_inode(c, ino, inode, 1); | |
| err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); | |
| if (err) | |
| goto out_release; | |
| if (!sync) | |
| ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, | |
| inode->i_ino); | |
| release_head(c, BASEHD); | |
| if (last_reference) { | |
| err = ubifs_tnc_remove_ino(c, inode->i_ino); | |
| if (err) | |
| goto out_ro; | |
| ubifs_delete_orphan(c, inode->i_ino); | |
| err = ubifs_add_dirt(c, lnum, len); | |
| } else { | |
| union ubifs_key key; | |
| ino_key_init(c, &key, inode->i_ino); | |
| err = ubifs_tnc_add(c, &key, lnum, offs, len); | |
| } | |
| if (err) | |
| goto out_ro; | |
| finish_reservation(c); | |
| spin_lock(&ui->ui_lock); | |
| ui->synced_i_size = ui->ui_size; | |
| spin_unlock(&ui->ui_lock); | |
| kfree(ino); | |
| return 0; | |
| out_release: | |
| release_head(c, BASEHD); | |
| out_ro: | |
| ubifs_ro_mode(c, err); | |
| finish_reservation(c); | |
| out_free: | |
| kfree(ino); | |
| return err; | |
| } | |
| /** | |
| * ubifs_jnl_delete_inode - delete an inode. | |
| * @c: UBIFS file-system description object | |
| * @inode: inode to delete | |
| * | |
| * This function deletes inode @inode which includes removing it from orphans, | |
| * deleting it from TNC and, in some cases, writing a deletion inode to the | |
| * journal. | |
| * | |
| * When regular file inodes are unlinked or a directory inode is removed, the | |
| * 'ubifs_jnl_update()' function writes a corresponding deletion inode and | |
| * direntry to the media, and adds the inode to orphans. After this, when the | |
| * last reference to this inode has been dropped, this function is called. In | |
| * general, it has to write one more deletion inode to the media, because if | |
| * a commit happened between 'ubifs_jnl_update()' and | |
| * 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal | |
| * anymore, and in fact it might not be on the flash anymore, because it might | |
| * have been garbage-collected already. And for optimization reasons UBIFS does | |
| * not read the orphan area if it has been unmounted cleanly, so it would have | |
| * no indication in the journal that there is a deleted inode which has to be | |
| * removed from TNC. | |
| * | |
| * However, if there was no commit between 'ubifs_jnl_update()' and | |
| * 'ubifs_jnl_delete_inode()', then there is no need to write the deletion | |
| * inode to the media for the second time. And this is quite a typical case. | |
| * | |
| * This function returns zero in case of success and a negative error code in | |
| * case of failure. | |
| */ | |
| int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode) | |
| { | |
| int err; | |
| struct ubifs_inode *ui = ubifs_inode(inode); | |
| ubifs_assert(inode->i_nlink == 0); | |
| if (ui->del_cmtno != c->cmt_no) | |
| /* A commit happened for sure */ | |
| return ubifs_jnl_write_inode(c, inode); | |
| down_read(&c->commit_sem); | |
| /* | |
| * Check commit number again, because the first test has been done | |
| * without @c->commit_sem, so a commit might have happened. | |
| */ | |
| if (ui->del_cmtno != c->cmt_no) { | |
| up_read(&c->commit_sem); | |
| return ubifs_jnl_write_inode(c, inode); | |
| } | |
| err = ubifs_tnc_remove_ino(c, inode->i_ino); | |
| if (err) | |
| ubifs_ro_mode(c, err); | |
| else | |
| ubifs_delete_orphan(c, inode->i_ino); | |
| up_read(&c->commit_sem); | |
| return err; | |
| } | |
| /** | |
| * ubifs_jnl_xrename - cross rename two directory entries. | |
| * @c: UBIFS file-system description object | |
| * @fst_dir: parent inode of 1st directory entry to exchange | |
| * @fst_dentry: 1st directory entry to exchange | |
| * @snd_dir: parent inode of 2nd directory entry to exchange | |
| * @snd_dentry: 2nd directory entry to exchange | |
| * @sync: non-zero if the write-buffer has to be synchronized | |
| * | |
| * This function implements the cross rename operation which may involve | |
| * writing 2 inodes and 2 directory entries. It marks the written inodes as clean | |
| * and returns zero on success. In case of failure, a negative error code is | |
| * returned. | |
| */ | |
| int ubifs_jnl_xrename(struct ubifs_info *c, const struct inode *fst_dir, | |
| const struct dentry *fst_dentry, | |
| const struct inode *snd_dir, | |
| const struct dentry *snd_dentry, int sync) | |
| { | |
| union ubifs_key key; | |
| struct ubifs_dent_node *dent1, *dent2; | |
| int err, dlen1, dlen2, lnum, offs, len, plen = UBIFS_INO_NODE_SZ; | |
| int aligned_dlen1, aligned_dlen2; | |
| int twoparents = (fst_dir != snd_dir); | |
| const struct inode *fst_inode = d_inode(fst_dentry); | |
| const struct inode *snd_inode = d_inode(snd_dentry); | |
| void *p; | |
| dbg_jnl("dent '%pd' in dir ino %lu between dent '%pd' in dir ino %lu", | |
| fst_dentry, fst_dir->i_ino, snd_dentry, snd_dir->i_ino); | |
| ubifs_assert(ubifs_inode(fst_dir)->data_len == 0); | |
| ubifs_assert(ubifs_inode(snd_dir)->data_len == 0); | |
| ubifs_assert(mutex_is_locked(&ubifs_inode(fst_dir)->ui_mutex)); | |
| ubifs_assert(mutex_is_locked(&ubifs_inode(snd_dir)->ui_mutex)); | |
| dlen1 = UBIFS_DENT_NODE_SZ + snd_dentry->d_name.len + 1; | |
| dlen2 = UBIFS_DENT_NODE_SZ + fst_dentry->d_name.len + 1; | |
| aligned_dlen1 = ALIGN(dlen1, 8); | |
| aligned_dlen2 = ALIGN(dlen2, 8); | |
| len = aligned_dlen1 + aligned_dlen2 + ALIGN(plen, 8); | |
| if (twoparents) | |
| len += plen; | |
| dent1 = kmalloc(len, GFP_NOFS); | |
| if (!dent1) | |
| return -ENOMEM; | |
| /* Make reservation before allocating sequence numbers */ | |
| err = make_reservation(c, BASEHD, len); | |
| if (err) | |
| goto out_free; | |
| /* Make new dent for 1st entry */ | |
| dent1->ch.node_type = UBIFS_DENT_NODE; | |
| dent_key_init_flash(c, &dent1->key, snd_dir->i_ino, &snd_dentry->d_name); | |
| dent1->inum = cpu_to_le64(fst_inode->i_ino); | |
| dent1->type = get_dent_type(fst_inode->i_mode); | |
| dent1->nlen = cpu_to_le16(snd_dentry->d_name.len); | |
| memcpy(dent1->name, snd_dentry->d_name.name, snd_dentry->d_name.len); | |
| dent1->name[snd_dentry->d_name.len] = '\0'; | |
| zero_dent_node_unused(dent1); | |
| ubifs_prep_grp_node(c, dent1, dlen1, 0); | |
| /* Make new dent for 2nd entry */ | |
| dent2 = (void *)dent1 + aligned_dlen1; | |
| dent2->ch.node_type = UBIFS_DENT_NODE; | |
| dent_key_init_flash(c, &dent2->key, fst_dir->i_ino, &fst_dentry->d_name); | |
| dent2->inum = cpu_to_le64(snd_inode->i_ino); | |
| dent2->type = get_dent_type(snd_inode->i_mode); | |
| dent2->nlen = cpu_to_le16(fst_dentry->d_name.len); | |
| memcpy(dent2->name, fst_dentry->d_name.name, fst_dentry->d_name.len); | |
| dent2->name[fst_dentry->d_name.len] = '\0'; | |
| zero_dent_node_unused(dent2); | |
| ubifs_prep_grp_node(c, dent2, dlen2, 0); | |
| p = (void *)dent2 + aligned_dlen2; | |
| if (!twoparents) | |
| pack_inode(c, p, fst_dir, 1); | |
| else { | |
| pack_inode(c, p, fst_dir, 0); | |
| p += ALIGN(plen, 8); | |
| pack_inode(c, p, snd_dir, 1); | |
| } | |
| err = write_head(c, BASEHD, dent1, len, &lnum, &offs, sync); | |
| if (err) | |
| goto out_release; | |
| if (!sync) { | |
| struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; | |
| ubifs_wbuf_add_ino_nolock(wbuf, fst_dir->i_ino); | |
| ubifs_wbuf_add_ino_nolock(wbuf, snd_dir->i_ino); | |
| } | |
| release_head(c, BASEHD); | |
| dent_key_init(c, &key, snd_dir->i_ino, &snd_dentry->d_name); | |
| err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen1, &snd_dentry->d_name); | |
| if (err) | |
| goto out_ro; | |
| offs += aligned_dlen1; | |
| dent_key_init(c, &key, fst_dir->i_ino, &fst_dentry->d_name); | |
| err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen2, &fst_dentry->d_name); | |
| if (err) | |
| goto out_ro; | |
| offs += aligned_dlen2; | |
| ino_key_init(c, &key, fst_dir->i_ino); | |
| err = ubifs_tnc_add(c, &key, lnum, offs, plen); | |
| if (err) | |
| goto out_ro; | |
| if (twoparents) { | |
| offs += ALIGN(plen, 8); | |
| ino_key_init(c, &key, snd_dir->i_ino); | |
| err = ubifs_tnc_add(c, &key, lnum, offs, plen); | |
| if (err) | |
| goto out_ro; | |
| } | |
| finish_reservation(c); | |
| mark_inode_clean(c, ubifs_inode(fst_dir)); | |
| if (twoparents) | |
| mark_inode_clean(c, ubifs_inode(snd_dir)); | |
| kfree(dent1); | |
| return 0; | |
| out_release: | |
| release_head(c, BASEHD); | |
| out_ro: | |
| ubifs_ro_mode(c, err); | |
| finish_reservation(c); | |
| out_free: | |
| kfree(dent1); | |
| return err; | |
| } | |
| /** | |
| * ubifs_jnl_rename - rename a directory entry. | |
| * @c: UBIFS file-system description object | |
| * @old_dir: parent inode of directory entry to rename | |
| * @old_dentry: directory entry to rename | |
| * @new_dir: parent inode of directory entry to rename | |
| * @new_dentry: new directory entry (or directory entry to replace) | |
| * @sync: non-zero if the write-buffer has to be synchronized | |
| * | |
| * This function implements the re-name operation which may involve writing up | |
| * to 4 inodes and 2 directory entries. It marks the written inodes as clean | |
| * and returns zero on success. In case of failure, a negative error code is | |
| * returned. | |
| */ | |
| int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, | |
| const struct dentry *old_dentry, | |
| const struct inode *new_dir, | |
| const struct dentry *new_dentry, | |
| const struct inode *whiteout, int sync) | |
| { | |
| void *p; | |
| union ubifs_key key; | |
| struct ubifs_dent_node *dent, *dent2; | |
| int err, dlen1, dlen2, ilen, lnum, offs, len; | |
| const struct inode *old_inode = d_inode(old_dentry); | |
| const struct inode *new_inode = d_inode(new_dentry); | |
| int aligned_dlen1, aligned_dlen2, plen = UBIFS_INO_NODE_SZ; | |
| int last_reference = !!(new_inode && new_inode->i_nlink == 0); | |
| int move = (old_dir != new_dir); | |
| struct ubifs_inode *uninitialized_var(new_ui); | |
| dbg_jnl("dent '%pd' in dir ino %lu to dent '%pd' in dir ino %lu", | |
| old_dentry, old_dir->i_ino, new_dentry, new_dir->i_ino); | |
| ubifs_assert(ubifs_inode(old_dir)->data_len == 0); | |
| ubifs_assert(ubifs_inode(new_dir)->data_len == 0); | |
| ubifs_assert(mutex_is_locked(&ubifs_inode(old_dir)->ui_mutex)); | |
| ubifs_assert(mutex_is_locked(&ubifs_inode(new_dir)->ui_mutex)); | |
| dlen1 = UBIFS_DENT_NODE_SZ + new_dentry->d_name.len + 1; | |
| dlen2 = UBIFS_DENT_NODE_SZ + old_dentry->d_name.len + 1; | |
| if (new_inode) { | |
| new_ui = ubifs_inode(new_inode); | |
| ubifs_assert(mutex_is_locked(&new_ui->ui_mutex)); | |
| ilen = UBIFS_INO_NODE_SZ; | |
| if (!last_reference) | |
| ilen += new_ui->data_len; | |
| } else | |
| ilen = 0; | |
| aligned_dlen1 = ALIGN(dlen1, 8); | |
| aligned_dlen2 = ALIGN(dlen2, 8); | |
| len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8); | |
| if (move) | |
| len += plen; | |
| dent = kmalloc(len, GFP_NOFS); | |
| if (!dent) | |
| return -ENOMEM; | |
| /* Make reservation before allocating sequence numbers */ | |
| err = make_reservation(c, BASEHD, len); | |
| if (err) | |
| goto out_free; | |
| /* Make new dent */ | |
| dent->ch.node_type = UBIFS_DENT_NODE; | |
| dent_key_init_flash(c, &dent->key, new_dir->i_ino, &new_dentry->d_name); | |
| dent->inum = cpu_to_le64(old_inode->i_ino); | |
| dent->type = get_dent_type(old_inode->i_mode); | |
| dent->nlen = cpu_to_le16(new_dentry->d_name.len); | |
| memcpy(dent->name, new_dentry->d_name.name, new_dentry->d_name.len); | |
| dent->name[new_dentry->d_name.len] = '\0'; | |
| zero_dent_node_unused(dent); | |
| ubifs_prep_grp_node(c, dent, dlen1, 0); | |
| dent2 = (void *)dent + aligned_dlen1; | |
| dent2->ch.node_type = UBIFS_DENT_NODE; | |
| dent_key_init_flash(c, &dent2->key, old_dir->i_ino, | |
| &old_dentry->d_name); | |
| if (whiteout) { | |
| dent2->inum = cpu_to_le64(whiteout->i_ino); | |
| dent2->type = get_dent_type(whiteout->i_mode); | |
| } else { | |
| /* Make deletion dent */ | |
| dent2->inum = 0; | |
| dent2->type = DT_UNKNOWN; | |
| } | |
| dent2->nlen = cpu_to_le16(old_dentry->d_name.len); | |
| memcpy(dent2->name, old_dentry->d_name.name, old_dentry->d_name.len); | |
| dent2->name[old_dentry->d_name.len] = '\0'; | |
| zero_dent_node_unused(dent2); | |
| ubifs_prep_grp_node(c, dent2, dlen2, 0); | |
| p = (void *)dent2 + aligned_dlen2; | |
| if (new_inode) { | |
| pack_inode(c, p, new_inode, 0); | |
| p += ALIGN(ilen, 8); | |
| } | |
| if (!move) | |
| pack_inode(c, p, old_dir, 1); | |
| else { | |
| pack_inode(c, p, old_dir, 0); | |
| p += ALIGN(plen, 8); | |
| pack_inode(c, p, new_dir, 1); | |
| } | |
| if (last_reference) { | |
| err = ubifs_add_orphan(c, new_inode->i_ino); | |
| if (err) { | |
| release_head(c, BASEHD); | |
| goto out_finish; | |
| } | |
| new_ui->del_cmtno = c->cmt_no; | |
| } | |
| err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync); | |
| if (err) | |
| goto out_release; | |
| if (!sync) { | |
| struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; | |
| ubifs_wbuf_add_ino_nolock(wbuf, new_dir->i_ino); | |
| ubifs_wbuf_add_ino_nolock(wbuf, old_dir->i_ino); | |
| if (new_inode) | |
| ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, | |
| new_inode->i_ino); | |
| } | |
| release_head(c, BASEHD); | |
| dent_key_init(c, &key, new_dir->i_ino, &new_dentry->d_name); | |
| err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen1, &new_dentry->d_name); | |
| if (err) | |
| goto out_ro; | |
| offs += aligned_dlen1; | |
| if (whiteout) { | |
| dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name); | |
| err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen2, &old_dentry->d_name); | |
| if (err) | |
| goto out_ro; | |
| ubifs_delete_orphan(c, whiteout->i_ino); | |
| } else { | |
| err = ubifs_add_dirt(c, lnum, dlen2); | |
| if (err) | |
| goto out_ro; | |
| dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name); | |
| err = ubifs_tnc_remove_nm(c, &key, &old_dentry->d_name); | |
| if (err) | |
| goto out_ro; | |
| } | |
| offs += aligned_dlen2; | |
| if (new_inode) { | |
| ino_key_init(c, &key, new_inode->i_ino); | |
| err = ubifs_tnc_add(c, &key, lnum, offs, ilen); | |
| if (err) | |
| goto out_ro; | |
| offs += ALIGN(ilen, 8); | |
| } | |
| ino_key_init(c, &key, old_dir->i_ino); | |
| err = ubifs_tnc_add(c, &key, lnum, offs, plen); | |
| if (err) | |
| goto out_ro; | |
| if (move) { | |
| offs += ALIGN(plen, 8); | |
| ino_key_init(c, &key, new_dir->i_ino); | |
| err = ubifs_tnc_add(c, &key, lnum, offs, plen); | |
| if (err) | |
| goto out_ro; | |
| } | |
| finish_reservation(c); | |
| if (new_inode) { | |
| mark_inode_clean(c, new_ui); | |
| spin_lock(&new_ui->ui_lock); | |
| new_ui->synced_i_size = new_ui->ui_size; | |
| spin_unlock(&new_ui->ui_lock); | |
| } | |
| mark_inode_clean(c, ubifs_inode(old_dir)); | |
| if (move) | |
| mark_inode_clean(c, ubifs_inode(new_dir)); | |
| kfree(dent); | |
| return 0; | |
| out_release: | |
| release_head(c, BASEHD); | |
| out_ro: | |
| ubifs_ro_mode(c, err); | |
| if (last_reference) | |
| ubifs_delete_orphan(c, new_inode->i_ino); | |
| out_finish: | |
| finish_reservation(c); | |
| out_free: | |
| kfree(dent); | |
| return err; | |
| } | |
| /** | |
| * recomp_data_node - re-compress a truncated data node. | |
| * @dn: data node to re-compress | |
| * @new_len: new length | |
| * | |
| * This function is used when an inode is truncated and the last data node of | |
| * the inode has to be re-compressed and re-written. | |
| */ | |
| static int recomp_data_node(const struct ubifs_info *c, | |
| struct ubifs_data_node *dn, int *new_len) | |
| { | |
| void *buf; | |
| int err, len, compr_type, out_len; | |
| out_len = le32_to_cpu(dn->size); | |
| buf = kmalloc(out_len * WORST_COMPR_FACTOR, GFP_NOFS); | |
| if (!buf) | |
| return -ENOMEM; | |
| len = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ; | |
| compr_type = le16_to_cpu(dn->compr_type); | |
| err = ubifs_decompress(c, &dn->data, len, buf, &out_len, compr_type); | |
| if (err) | |
| goto out; | |
| ubifs_compress(c, buf, *new_len, &dn->data, &out_len, &compr_type); | |
| ubifs_assert(out_len <= UBIFS_BLOCK_SIZE); | |
| dn->compr_type = cpu_to_le16(compr_type); | |
| dn->size = cpu_to_le32(*new_len); | |
| *new_len = UBIFS_DATA_NODE_SZ + out_len; | |
| out: | |
| kfree(buf); | |
| return err; | |
| } | |
| /** | |
| * ubifs_jnl_truncate - update the journal for a truncation. | |
| * @c: UBIFS file-system description object | |
| * @inode: inode to truncate | |
| * @old_size: old size | |
| * @new_size: new size | |
| * | |
| * When the size of a file decreases due to truncation, a truncation node is | |
| * written, the journal tree is updated, and the last data block is re-written | |
| * if it has been affected. The inode is also updated in order to synchronize | |
| * the new inode size. | |
| * | |
| * This function marks the inode as clean and returns zero on success. In case | |
| * of failure, a negative error code is returned. | |
| */ | |
| int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode, | |
| loff_t old_size, loff_t new_size) | |
| { | |
| union ubifs_key key, to_key; | |
| struct ubifs_ino_node *ino; | |
| struct ubifs_trun_node *trun; | |
| struct ubifs_data_node *uninitialized_var(dn); | |
| int err, dlen, len, lnum, offs, bit, sz, sync = IS_SYNC(inode); | |
| struct ubifs_inode *ui = ubifs_inode(inode); | |
| ino_t inum = inode->i_ino; | |
| unsigned int blk; | |
| dbg_jnl("ino %lu, size %lld -> %lld", | |
| (unsigned long)inum, old_size, new_size); | |
| ubifs_assert(!ui->data_len); | |
| ubifs_assert(S_ISREG(inode->i_mode)); | |
| ubifs_assert(mutex_is_locked(&ui->ui_mutex)); | |
| sz = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ + | |
| UBIFS_MAX_DATA_NODE_SZ * WORST_COMPR_FACTOR; | |
| ino = kmalloc(sz, GFP_NOFS); | |
| if (!ino) | |
| return -ENOMEM; | |
| trun = (void *)ino + UBIFS_INO_NODE_SZ; | |
| trun->ch.node_type = UBIFS_TRUN_NODE; | |
| trun->inum = cpu_to_le32(inum); | |
| trun->old_size = cpu_to_le64(old_size); | |
| trun->new_size = cpu_to_le64(new_size); | |
| zero_trun_node_unused(trun); | |
| dlen = new_size & (UBIFS_BLOCK_SIZE - 1); | |
| if (dlen) { | |
| /* Get last data block so it can be truncated */ | |
| dn = (void *)trun + UBIFS_TRUN_NODE_SZ; | |
| blk = new_size >> UBIFS_BLOCK_SHIFT; | |
| data_key_init(c, &key, inum, blk); | |
| dbg_jnlk(&key, "last block key "); | |
| err = ubifs_tnc_lookup(c, &key, dn); | |
| if (err == -ENOENT) | |
| dlen = 0; /* Not found (so it is a hole) */ | |
| else if (err) | |
| goto out_free; | |
| else { | |
| if (le32_to_cpu(dn->size) <= dlen) | |
| dlen = 0; /* Nothing to do */ | |
| else { | |
| int compr_type = le16_to_cpu(dn->compr_type); | |
| if (compr_type != UBIFS_COMPR_NONE) { | |
| err = recomp_data_node(c, dn, &dlen); | |
| if (err) | |
| goto out_free; | |
| } else { | |
| dn->size = cpu_to_le32(dlen); | |
| dlen += UBIFS_DATA_NODE_SZ; | |
| } | |
| zero_data_node_unused(dn); | |
| } | |
| } | |
| } | |
| /* Must make reservation before allocating sequence numbers */ | |
| len = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ; | |
| if (dlen) | |
| len += dlen; | |
| err = make_reservation(c, BASEHD, len); | |
| if (err) | |
| goto out_free; | |
| pack_inode(c, ino, inode, 0); | |
| ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1); | |
| if (dlen) | |
| ubifs_prep_grp_node(c, dn, dlen, 1); | |
| err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); | |
| if (err) | |
| goto out_release; | |
| if (!sync) | |
| ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, inum); | |
| release_head(c, BASEHD); | |
| if (dlen) { | |
| sz = offs + UBIFS_INO_NODE_SZ + UBIFS_TRUN_NODE_SZ; | |
| err = ubifs_tnc_add(c, &key, lnum, sz, dlen); | |
| if (err) | |
| goto out_ro; | |
| } | |
| ino_key_init(c, &key, inum); | |
| err = ubifs_tnc_add(c, &key, lnum, offs, UBIFS_INO_NODE_SZ); | |
| if (err) | |
| goto out_ro; | |
| err = ubifs_add_dirt(c, lnum, UBIFS_TRUN_NODE_SZ); | |
| if (err) | |
| goto out_ro; | |
| bit = new_size & (UBIFS_BLOCK_SIZE - 1); | |
| blk = (new_size >> UBIFS_BLOCK_SHIFT) + (bit ? 1 : 0); | |
| data_key_init(c, &key, inum, blk); | |
| bit = old_size & (UBIFS_BLOCK_SIZE - 1); | |
| blk = (old_size >> UBIFS_BLOCK_SHIFT) - (bit ? 0 : 1); | |
| data_key_init(c, &to_key, inum, blk); | |
| err = ubifs_tnc_remove_range(c, &key, &to_key); | |
| if (err) | |
| goto out_ro; | |
| finish_reservation(c); | |
| spin_lock(&ui->ui_lock); | |
| ui->synced_i_size = ui->ui_size; | |
| spin_unlock(&ui->ui_lock); | |
| mark_inode_clean(c, ui); | |
| kfree(ino); | |
| return 0; | |
| out_release: | |
| release_head(c, BASEHD); | |
| out_ro: | |
| ubifs_ro_mode(c, err); | |
| finish_reservation(c); | |
| out_free: | |
| kfree(ino); | |
| return err; | |
| } | |
| /** | |
| * ubifs_jnl_delete_xattr - delete an extended attribute. | |
| * @c: UBIFS file-system description object | |
| * @host: host inode | |
| * @inode: extended attribute inode | |
| * @nm: extended attribute entry name | |
| * | |
| * This function delete an extended attribute which is very similar to | |
| * un-linking regular files - it writes a deletion xentry, a deletion inode and | |
| * updates the target inode. Returns zero in case of success and a negative | |
| * error code in case of failure. | |
| */ | |
| int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host, | |
| const struct inode *inode, const struct qstr *nm) | |
| { | |
| int err, xlen, hlen, len, lnum, xent_offs, aligned_xlen; | |
| struct ubifs_dent_node *xent; | |
| struct ubifs_ino_node *ino; | |
| union ubifs_key xent_key, key1, key2; | |
| int sync = IS_DIRSYNC(host); | |
| struct ubifs_inode *host_ui = ubifs_inode(host); | |
| dbg_jnl("host %lu, xattr ino %lu, name '%s', data len %d", | |
| host->i_ino, inode->i_ino, nm->name, | |
| ubifs_inode(inode)->data_len); | |
| ubifs_assert(inode->i_nlink == 0); | |
| ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); | |
| /* | |
| * Since we are deleting the inode, we do not bother to attach any data | |
| * to it and assume its length is %UBIFS_INO_NODE_SZ. | |
| */ | |
| xlen = UBIFS_DENT_NODE_SZ + nm->len + 1; | |
| aligned_xlen = ALIGN(xlen, 8); | |
| hlen = host_ui->data_len + UBIFS_INO_NODE_SZ; | |
| len = aligned_xlen + UBIFS_INO_NODE_SZ + ALIGN(hlen, 8); | |
| xent = kmalloc(len, GFP_NOFS); | |
| if (!xent) | |
| return -ENOMEM; | |
| /* Make reservation before allocating sequence numbers */ | |
| err = make_reservation(c, BASEHD, len); | |
| if (err) { | |
| kfree(xent); | |
| return err; | |
| } | |
| xent->ch.node_type = UBIFS_XENT_NODE; | |
| xent_key_init(c, &xent_key, host->i_ino, nm); | |
| key_write(c, &xent_key, xent->key); | |
| xent->inum = 0; | |
| xent->type = get_dent_type(inode->i_mode); | |
| xent->nlen = cpu_to_le16(nm->len); | |
| memcpy(xent->name, nm->name, nm->len); | |
| xent->name[nm->len] = '\0'; | |
| zero_dent_node_unused(xent); | |
| ubifs_prep_grp_node(c, xent, xlen, 0); | |
| ino = (void *)xent + aligned_xlen; | |
| pack_inode(c, ino, inode, 0); | |
| ino = (void *)ino + UBIFS_INO_NODE_SZ; | |
| pack_inode(c, ino, host, 1); | |
| err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync); | |
| if (!sync && !err) | |
| ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, host->i_ino); | |
| release_head(c, BASEHD); | |
| kfree(xent); | |
| if (err) | |
| goto out_ro; | |
| /* Remove the extended attribute entry from TNC */ | |
| err = ubifs_tnc_remove_nm(c, &xent_key, nm); | |
| if (err) | |
| goto out_ro; | |
| err = ubifs_add_dirt(c, lnum, xlen); | |
| if (err) | |
| goto out_ro; | |
| /* | |
| * Remove all nodes belonging to the extended attribute inode from TNC. | |
| * Well, there actually must be only one node - the inode itself. | |
| */ | |
| lowest_ino_key(c, &key1, inode->i_ino); | |
| highest_ino_key(c, &key2, inode->i_ino); | |
| err = ubifs_tnc_remove_range(c, &key1, &key2); | |
| if (err) | |
| goto out_ro; | |
| err = ubifs_add_dirt(c, lnum, UBIFS_INO_NODE_SZ); | |
| if (err) | |
| goto out_ro; | |
| /* And update TNC with the new host inode position */ | |
| ino_key_init(c, &key1, host->i_ino); | |
| err = ubifs_tnc_add(c, &key1, lnum, xent_offs + len - hlen, hlen); | |
| if (err) | |
| goto out_ro; | |
| finish_reservation(c); | |
| spin_lock(&host_ui->ui_lock); | |
| host_ui->synced_i_size = host_ui->ui_size; | |
| spin_unlock(&host_ui->ui_lock); | |
| mark_inode_clean(c, host_ui); | |
| return 0; | |
| out_ro: | |
| ubifs_ro_mode(c, err); | |
| finish_reservation(c); | |
| return err; | |
| } | |
| /** | |
| * ubifs_jnl_change_xattr - change an extended attribute. | |
| * @c: UBIFS file-system description object | |
| * @inode: extended attribute inode | |
| * @host: host inode | |
| * | |
| * This function writes the updated version of an extended attribute inode and | |
| * the host inode to the journal (to the base head). The host inode is written | |
| * after the extended attribute inode in order to guarantee that the extended | |
| * attribute will be flushed when the inode is synchronized by 'fsync()' and | |
| * consequently, the write-buffer is synchronized. This function returns zero | |
| * in case of success and a negative error code in case of failure. | |
| */ | |
| int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode, | |
| const struct inode *host) | |
| { | |
| int err, len1, len2, aligned_len, aligned_len1, lnum, offs; | |
| struct ubifs_inode *host_ui = ubifs_inode(host); | |
| struct ubifs_ino_node *ino; | |
| union ubifs_key key; | |
| int sync = IS_DIRSYNC(host); | |
| dbg_jnl("ino %lu, ino %lu", host->i_ino, inode->i_ino); | |
| ubifs_assert(host->i_nlink > 0); | |
| ubifs_assert(inode->i_nlink > 0); | |
| ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); | |
| len1 = UBIFS_INO_NODE_SZ + host_ui->data_len; | |
| len2 = UBIFS_INO_NODE_SZ + ubifs_inode(inode)->data_len; | |
| aligned_len1 = ALIGN(len1, 8); | |
| aligned_len = aligned_len1 + ALIGN(len2, 8); | |
| ino = kmalloc(aligned_len, GFP_NOFS); | |
| if (!ino) | |
| return -ENOMEM; | |
| /* Make reservation before allocating sequence numbers */ | |
| err = make_reservation(c, BASEHD, aligned_len); | |
| if (err) | |
| goto out_free; | |
| pack_inode(c, ino, host, 0); | |
| pack_inode(c, (void *)ino + aligned_len1, inode, 1); | |
| err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0); | |
| if (!sync && !err) { | |
| struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; | |
| ubifs_wbuf_add_ino_nolock(wbuf, host->i_ino); | |
| ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino); | |
| } | |
| release_head(c, BASEHD); | |
| if (err) | |
| goto out_ro; | |
| ino_key_init(c, &key, host->i_ino); | |
| err = ubifs_tnc_add(c, &key, lnum, offs, len1); | |
| if (err) | |
| goto out_ro; | |
| ino_key_init(c, &key, inode->i_ino); | |
| err = ubifs_tnc_add(c, &key, lnum, offs + aligned_len1, len2); | |
| if (err) | |
| goto out_ro; | |
| finish_reservation(c); | |
| spin_lock(&host_ui->ui_lock); | |
| host_ui->synced_i_size = host_ui->ui_size; | |
| spin_unlock(&host_ui->ui_lock); | |
| mark_inode_clean(c, host_ui); | |
| kfree(ino); | |
| return 0; | |
| out_ro: | |
| ubifs_ro_mode(c, err); | |
| finish_reservation(c); | |
| out_free: | |
| kfree(ino); | |
| return err; | |
| } | |