| /* | |
| * Copyright (c) 2000-2002,2005 Silicon Graphics, Inc. | |
| * Copyright (c) 2008 Dave Chinner | |
| * All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it would be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write the Free Software Foundation, | |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
| */ | |
| #include "xfs.h" | |
| #include "xfs_fs.h" | |
| #include "xfs_format.h" | |
| #include "xfs_log_format.h" | |
| #include "xfs_trans_resv.h" | |
| #include "xfs_mount.h" | |
| #include "xfs_trans.h" | |
| #include "xfs_trans_priv.h" | |
| #include "xfs_trace.h" | |
| #include "xfs_error.h" | |
| #include "xfs_log.h" | |
| #ifdef DEBUG | |
| /* | |
| * Check that the list is sorted as it should be. | |
| */ | |
| STATIC void | |
| xfs_ail_check( | |
| struct xfs_ail *ailp, | |
| xfs_log_item_t *lip) | |
| { | |
| xfs_log_item_t *prev_lip; | |
| if (list_empty(&ailp->xa_ail)) | |
| return; | |
| /* | |
| * Check the next and previous entries are valid. | |
| */ | |
| ASSERT((lip->li_flags & XFS_LI_IN_AIL) != 0); | |
| prev_lip = list_entry(lip->li_ail.prev, xfs_log_item_t, li_ail); | |
| if (&prev_lip->li_ail != &ailp->xa_ail) | |
| ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0); | |
| prev_lip = list_entry(lip->li_ail.next, xfs_log_item_t, li_ail); | |
| if (&prev_lip->li_ail != &ailp->xa_ail) | |
| ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) >= 0); | |
| } | |
| #else /* !DEBUG */ | |
| #define xfs_ail_check(a,l) | |
| #endif /* DEBUG */ | |
| /* | |
| * Return a pointer to the last item in the AIL. If the AIL is empty, then | |
| * return NULL. | |
| */ | |
| static xfs_log_item_t * | |
| xfs_ail_max( | |
| struct xfs_ail *ailp) | |
| { | |
| if (list_empty(&ailp->xa_ail)) | |
| return NULL; | |
| return list_entry(ailp->xa_ail.prev, xfs_log_item_t, li_ail); | |
| } | |
| /* | |
| * Return a pointer to the item which follows the given item in the AIL. If | |
| * the given item is the last item in the list, then return NULL. | |
| */ | |
| static xfs_log_item_t * | |
| xfs_ail_next( | |
| struct xfs_ail *ailp, | |
| xfs_log_item_t *lip) | |
| { | |
| if (lip->li_ail.next == &ailp->xa_ail) | |
| return NULL; | |
| return list_first_entry(&lip->li_ail, xfs_log_item_t, li_ail); | |
| } | |
| /* | |
| * This is called by the log manager code to determine the LSN of the tail of | |
| * the log. This is exactly the LSN of the first item in the AIL. If the AIL | |
| * is empty, then this function returns 0. | |
| * | |
| * We need the AIL lock in order to get a coherent read of the lsn of the last | |
| * item in the AIL. | |
| */ | |
| xfs_lsn_t | |
| xfs_ail_min_lsn( | |
| struct xfs_ail *ailp) | |
| { | |
| xfs_lsn_t lsn = 0; | |
| xfs_log_item_t *lip; | |
| spin_lock(&ailp->xa_lock); | |
| lip = xfs_ail_min(ailp); | |
| if (lip) | |
| lsn = lip->li_lsn; | |
| spin_unlock(&ailp->xa_lock); | |
| return lsn; | |
| } | |
| /* | |
| * Return the maximum lsn held in the AIL, or zero if the AIL is empty. | |
| */ | |
| static xfs_lsn_t | |
| xfs_ail_max_lsn( | |
| struct xfs_ail *ailp) | |
| { | |
| xfs_lsn_t lsn = 0; | |
| xfs_log_item_t *lip; | |
| spin_lock(&ailp->xa_lock); | |
| lip = xfs_ail_max(ailp); | |
| if (lip) | |
| lsn = lip->li_lsn; | |
| spin_unlock(&ailp->xa_lock); | |
| return lsn; | |
| } | |
| /* | |
| * The cursor keeps track of where our current traversal is up to by tracking | |
| * the next item in the list for us. However, for this to be safe, removing an | |
| * object from the AIL needs to invalidate any cursor that points to it. hence | |
| * the traversal cursor needs to be linked to the struct xfs_ail so that | |
| * deletion can search all the active cursors for invalidation. | |
| */ | |
| STATIC void | |
| xfs_trans_ail_cursor_init( | |
| struct xfs_ail *ailp, | |
| struct xfs_ail_cursor *cur) | |
| { | |
| cur->item = NULL; | |
| list_add_tail(&cur->list, &ailp->xa_cursors); | |
| } | |
| /* | |
| * Get the next item in the traversal and advance the cursor. If the cursor | |
| * was invalidated (indicated by a lip of 1), restart the traversal. | |
| */ | |
| struct xfs_log_item * | |
| xfs_trans_ail_cursor_next( | |
| struct xfs_ail *ailp, | |
| struct xfs_ail_cursor *cur) | |
| { | |
| struct xfs_log_item *lip = cur->item; | |
| if ((uintptr_t)lip & 1) | |
| lip = xfs_ail_min(ailp); | |
| if (lip) | |
| cur->item = xfs_ail_next(ailp, lip); | |
| return lip; | |
| } | |
| /* | |
| * When the traversal is complete, we need to remove the cursor from the list | |
| * of traversing cursors. | |
| */ | |
| void | |
| xfs_trans_ail_cursor_done( | |
| struct xfs_ail_cursor *cur) | |
| { | |
| cur->item = NULL; | |
| list_del_init(&cur->list); | |
| } | |
| /* | |
| * Invalidate any cursor that is pointing to this item. This is called when an | |
| * item is removed from the AIL. Any cursor pointing to this object is now | |
| * invalid and the traversal needs to be terminated so it doesn't reference a | |
| * freed object. We set the low bit of the cursor item pointer so we can | |
| * distinguish between an invalidation and the end of the list when getting the | |
| * next item from the cursor. | |
| */ | |
| STATIC void | |
| xfs_trans_ail_cursor_clear( | |
| struct xfs_ail *ailp, | |
| struct xfs_log_item *lip) | |
| { | |
| struct xfs_ail_cursor *cur; | |
| list_for_each_entry(cur, &ailp->xa_cursors, list) { | |
| if (cur->item == lip) | |
| cur->item = (struct xfs_log_item *) | |
| ((uintptr_t)cur->item | 1); | |
| } | |
| } | |
| /* | |
| * Find the first item in the AIL with the given @lsn by searching in ascending | |
| * LSN order and initialise the cursor to point to the next item for a | |
| * ascending traversal. Pass a @lsn of zero to initialise the cursor to the | |
| * first item in the AIL. Returns NULL if the list is empty. | |
| */ | |
| xfs_log_item_t * | |
| xfs_trans_ail_cursor_first( | |
| struct xfs_ail *ailp, | |
| struct xfs_ail_cursor *cur, | |
| xfs_lsn_t lsn) | |
| { | |
| xfs_log_item_t *lip; | |
| xfs_trans_ail_cursor_init(ailp, cur); | |
| if (lsn == 0) { | |
| lip = xfs_ail_min(ailp); | |
| goto out; | |
| } | |
| list_for_each_entry(lip, &ailp->xa_ail, li_ail) { | |
| if (XFS_LSN_CMP(lip->li_lsn, lsn) >= 0) | |
| goto out; | |
| } | |
| return NULL; | |
| out: | |
| if (lip) | |
| cur->item = xfs_ail_next(ailp, lip); | |
| return lip; | |
| } | |
| static struct xfs_log_item * | |
| __xfs_trans_ail_cursor_last( | |
| struct xfs_ail *ailp, | |
| xfs_lsn_t lsn) | |
| { | |
| xfs_log_item_t *lip; | |
| list_for_each_entry_reverse(lip, &ailp->xa_ail, li_ail) { | |
| if (XFS_LSN_CMP(lip->li_lsn, lsn) <= 0) | |
| return lip; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Find the last item in the AIL with the given @lsn by searching in descending | |
| * LSN order and initialise the cursor to point to that item. If there is no | |
| * item with the value of @lsn, then it sets the cursor to the last item with an | |
| * LSN lower than @lsn. Returns NULL if the list is empty. | |
| */ | |
| struct xfs_log_item * | |
| xfs_trans_ail_cursor_last( | |
| struct xfs_ail *ailp, | |
| struct xfs_ail_cursor *cur, | |
| xfs_lsn_t lsn) | |
| { | |
| xfs_trans_ail_cursor_init(ailp, cur); | |
| cur->item = __xfs_trans_ail_cursor_last(ailp, lsn); | |
| return cur->item; | |
| } | |
| /* | |
| * Splice the log item list into the AIL at the given LSN. We splice to the | |
| * tail of the given LSN to maintain insert order for push traversals. The | |
| * cursor is optional, allowing repeated updates to the same LSN to avoid | |
| * repeated traversals. This should not be called with an empty list. | |
| */ | |
| static void | |
| xfs_ail_splice( | |
| struct xfs_ail *ailp, | |
| struct xfs_ail_cursor *cur, | |
| struct list_head *list, | |
| xfs_lsn_t lsn) | |
| { | |
| struct xfs_log_item *lip; | |
| ASSERT(!list_empty(list)); | |
| /* | |
| * Use the cursor to determine the insertion point if one is | |
| * provided. If not, or if the one we got is not valid, | |
| * find the place in the AIL where the items belong. | |
| */ | |
| lip = cur ? cur->item : NULL; | |
| if (!lip || (uintptr_t)lip & 1) | |
| lip = __xfs_trans_ail_cursor_last(ailp, lsn); | |
| /* | |
| * If a cursor is provided, we know we're processing the AIL | |
| * in lsn order, and future items to be spliced in will | |
| * follow the last one being inserted now. Update the | |
| * cursor to point to that last item, now while we have a | |
| * reliable pointer to it. | |
| */ | |
| if (cur) | |
| cur->item = list_entry(list->prev, struct xfs_log_item, li_ail); | |
| /* | |
| * Finally perform the splice. Unless the AIL was empty, | |
| * lip points to the item in the AIL _after_ which the new | |
| * items should go. If lip is null the AIL was empty, so | |
| * the new items go at the head of the AIL. | |
| */ | |
| if (lip) | |
| list_splice(list, &lip->li_ail); | |
| else | |
| list_splice(list, &ailp->xa_ail); | |
| } | |
| /* | |
| * Delete the given item from the AIL. Return a pointer to the item. | |
| */ | |
| static void | |
| xfs_ail_delete( | |
| struct xfs_ail *ailp, | |
| xfs_log_item_t *lip) | |
| { | |
| xfs_ail_check(ailp, lip); | |
| list_del(&lip->li_ail); | |
| xfs_trans_ail_cursor_clear(ailp, lip); | |
| } | |
| static long | |
| xfsaild_push( | |
| struct xfs_ail *ailp) | |
| { | |
| xfs_mount_t *mp = ailp->xa_mount; | |
| struct xfs_ail_cursor cur; | |
| xfs_log_item_t *lip; | |
| xfs_lsn_t lsn; | |
| xfs_lsn_t target; | |
| long tout; | |
| int stuck = 0; | |
| int flushing = 0; | |
| int count = 0; | |
| /* | |
| * If we encountered pinned items or did not finish writing out all | |
| * buffers the last time we ran, force the log first and wait for it | |
| * before pushing again. | |
| */ | |
| if (ailp->xa_log_flush && ailp->xa_last_pushed_lsn == 0 && | |
| (!list_empty_careful(&ailp->xa_buf_list) || | |
| xfs_ail_min_lsn(ailp))) { | |
| ailp->xa_log_flush = 0; | |
| XFS_STATS_INC(mp, xs_push_ail_flush); | |
| xfs_log_force(mp, XFS_LOG_SYNC); | |
| } | |
| spin_lock(&ailp->xa_lock); | |
| /* barrier matches the xa_target update in xfs_ail_push() */ | |
| smp_rmb(); | |
| target = ailp->xa_target; | |
| ailp->xa_target_prev = target; | |
| lip = xfs_trans_ail_cursor_first(ailp, &cur, ailp->xa_last_pushed_lsn); | |
| if (!lip) { | |
| /* | |
| * If the AIL is empty or our push has reached the end we are | |
| * done now. | |
| */ | |
| xfs_trans_ail_cursor_done(&cur); | |
| spin_unlock(&ailp->xa_lock); | |
| goto out_done; | |
| } | |
| XFS_STATS_INC(mp, xs_push_ail); | |
| lsn = lip->li_lsn; | |
| while ((XFS_LSN_CMP(lip->li_lsn, target) <= 0)) { | |
| int lock_result; | |
| /* | |
| * Note that iop_push may unlock and reacquire the AIL lock. We | |
| * rely on the AIL cursor implementation to be able to deal with | |
| * the dropped lock. | |
| */ | |
| lock_result = lip->li_ops->iop_push(lip, &ailp->xa_buf_list); | |
| switch (lock_result) { | |
| case XFS_ITEM_SUCCESS: | |
| XFS_STATS_INC(mp, xs_push_ail_success); | |
| trace_xfs_ail_push(lip); | |
| ailp->xa_last_pushed_lsn = lsn; | |
| break; | |
| case XFS_ITEM_FLUSHING: | |
| /* | |
| * The item or its backing buffer is already beeing | |
| * flushed. The typical reason for that is that an | |
| * inode buffer is locked because we already pushed the | |
| * updates to it as part of inode clustering. | |
| * | |
| * We do not want to to stop flushing just because lots | |
| * of items are already beeing flushed, but we need to | |
| * re-try the flushing relatively soon if most of the | |
| * AIL is beeing flushed. | |
| */ | |
| XFS_STATS_INC(mp, xs_push_ail_flushing); | |
| trace_xfs_ail_flushing(lip); | |
| flushing++; | |
| ailp->xa_last_pushed_lsn = lsn; | |
| break; | |
| case XFS_ITEM_PINNED: | |
| XFS_STATS_INC(mp, xs_push_ail_pinned); | |
| trace_xfs_ail_pinned(lip); | |
| stuck++; | |
| ailp->xa_log_flush++; | |
| break; | |
| case XFS_ITEM_LOCKED: | |
| XFS_STATS_INC(mp, xs_push_ail_locked); | |
| trace_xfs_ail_locked(lip); | |
| stuck++; | |
| break; | |
| default: | |
| ASSERT(0); | |
| break; | |
| } | |
| count++; | |
| /* | |
| * Are there too many items we can't do anything with? | |
| * | |
| * If we we are skipping too many items because we can't flush | |
| * them or they are already being flushed, we back off and | |
| * given them time to complete whatever operation is being | |
| * done. i.e. remove pressure from the AIL while we can't make | |
| * progress so traversals don't slow down further inserts and | |
| * removals to/from the AIL. | |
| * | |
| * The value of 100 is an arbitrary magic number based on | |
| * observation. | |
| */ | |
| if (stuck > 100) | |
| break; | |
| lip = xfs_trans_ail_cursor_next(ailp, &cur); | |
| if (lip == NULL) | |
| break; | |
| lsn = lip->li_lsn; | |
| } | |
| xfs_trans_ail_cursor_done(&cur); | |
| spin_unlock(&ailp->xa_lock); | |
| if (xfs_buf_delwri_submit_nowait(&ailp->xa_buf_list)) | |
| ailp->xa_log_flush++; | |
| if (!count || XFS_LSN_CMP(lsn, target) >= 0) { | |
| out_done: | |
| /* | |
| * We reached the target or the AIL is empty, so wait a bit | |
| * longer for I/O to complete and remove pushed items from the | |
| * AIL before we start the next scan from the start of the AIL. | |
| */ | |
| tout = 50; | |
| ailp->xa_last_pushed_lsn = 0; | |
| } else if (((stuck + flushing) * 100) / count > 90) { | |
| /* | |
| * Either there is a lot of contention on the AIL or we are | |
| * stuck due to operations in progress. "Stuck" in this case | |
| * is defined as >90% of the items we tried to push were stuck. | |
| * | |
| * Backoff a bit more to allow some I/O to complete before | |
| * restarting from the start of the AIL. This prevents us from | |
| * spinning on the same items, and if they are pinned will all | |
| * the restart to issue a log force to unpin the stuck items. | |
| */ | |
| tout = 20; | |
| ailp->xa_last_pushed_lsn = 0; | |
| } else { | |
| /* | |
| * Assume we have more work to do in a short while. | |
| */ | |
| tout = 10; | |
| } | |
| return tout; | |
| } | |
| static int | |
| xfsaild( | |
| void *data) | |
| { | |
| struct xfs_ail *ailp = data; | |
| long tout = 0; /* milliseconds */ | |
| current->flags |= PF_MEMALLOC; | |
| set_freezable(); | |
| while (!kthread_should_stop()) { | |
| if (tout && tout <= 20) | |
| __set_current_state(TASK_KILLABLE); | |
| else | |
| __set_current_state(TASK_INTERRUPTIBLE); | |
| spin_lock(&ailp->xa_lock); | |
| /* | |
| * Idle if the AIL is empty and we are not racing with a target | |
| * update. We check the AIL after we set the task to a sleep | |
| * state to guarantee that we either catch an xa_target update | |
| * or that a wake_up resets the state to TASK_RUNNING. | |
| * Otherwise, we run the risk of sleeping indefinitely. | |
| * | |
| * The barrier matches the xa_target update in xfs_ail_push(). | |
| */ | |
| smp_rmb(); | |
| if (!xfs_ail_min(ailp) && | |
| ailp->xa_target == ailp->xa_target_prev) { | |
| spin_unlock(&ailp->xa_lock); | |
| freezable_schedule(); | |
| tout = 0; | |
| continue; | |
| } | |
| spin_unlock(&ailp->xa_lock); | |
| if (tout) | |
| freezable_schedule_timeout(msecs_to_jiffies(tout)); | |
| __set_current_state(TASK_RUNNING); | |
| try_to_freeze(); | |
| tout = xfsaild_push(ailp); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * This routine is called to move the tail of the AIL forward. It does this by | |
| * trying to flush items in the AIL whose lsns are below the given | |
| * threshold_lsn. | |
| * | |
| * The push is run asynchronously in a workqueue, which means the caller needs | |
| * to handle waiting on the async flush for space to become available. | |
| * We don't want to interrupt any push that is in progress, hence we only queue | |
| * work if we set the pushing bit approriately. | |
| * | |
| * We do this unlocked - we only need to know whether there is anything in the | |
| * AIL at the time we are called. We don't need to access the contents of | |
| * any of the objects, so the lock is not needed. | |
| */ | |
| void | |
| xfs_ail_push( | |
| struct xfs_ail *ailp, | |
| xfs_lsn_t threshold_lsn) | |
| { | |
| xfs_log_item_t *lip; | |
| lip = xfs_ail_min(ailp); | |
| if (!lip || XFS_FORCED_SHUTDOWN(ailp->xa_mount) || | |
| XFS_LSN_CMP(threshold_lsn, ailp->xa_target) <= 0) | |
| return; | |
| /* | |
| * Ensure that the new target is noticed in push code before it clears | |
| * the XFS_AIL_PUSHING_BIT. | |
| */ | |
| smp_wmb(); | |
| xfs_trans_ail_copy_lsn(ailp, &ailp->xa_target, &threshold_lsn); | |
| smp_wmb(); | |
| wake_up_process(ailp->xa_task); | |
| } | |
| /* | |
| * Push out all items in the AIL immediately | |
| */ | |
| void | |
| xfs_ail_push_all( | |
| struct xfs_ail *ailp) | |
| { | |
| xfs_lsn_t threshold_lsn = xfs_ail_max_lsn(ailp); | |
| if (threshold_lsn) | |
| xfs_ail_push(ailp, threshold_lsn); | |
| } | |
| /* | |
| * Push out all items in the AIL immediately and wait until the AIL is empty. | |
| */ | |
| void | |
| xfs_ail_push_all_sync( | |
| struct xfs_ail *ailp) | |
| { | |
| struct xfs_log_item *lip; | |
| DEFINE_WAIT(wait); | |
| spin_lock(&ailp->xa_lock); | |
| while ((lip = xfs_ail_max(ailp)) != NULL) { | |
| prepare_to_wait(&ailp->xa_empty, &wait, TASK_UNINTERRUPTIBLE); | |
| ailp->xa_target = lip->li_lsn; | |
| wake_up_process(ailp->xa_task); | |
| spin_unlock(&ailp->xa_lock); | |
| schedule(); | |
| spin_lock(&ailp->xa_lock); | |
| } | |
| spin_unlock(&ailp->xa_lock); | |
| finish_wait(&ailp->xa_empty, &wait); | |
| } | |
| /* | |
| * xfs_trans_ail_update - bulk AIL insertion operation. | |
| * | |
| * @xfs_trans_ail_update takes an array of log items that all need to be | |
| * positioned at the same LSN in the AIL. If an item is not in the AIL, it will | |
| * be added. Otherwise, it will be repositioned by removing it and re-adding | |
| * it to the AIL. If we move the first item in the AIL, update the log tail to | |
| * match the new minimum LSN in the AIL. | |
| * | |
| * This function takes the AIL lock once to execute the update operations on | |
| * all the items in the array, and as such should not be called with the AIL | |
| * lock held. As a result, once we have the AIL lock, we need to check each log | |
| * item LSN to confirm it needs to be moved forward in the AIL. | |
| * | |
| * To optimise the insert operation, we delete all the items from the AIL in | |
| * the first pass, moving them into a temporary list, then splice the temporary | |
| * list into the correct position in the AIL. This avoids needing to do an | |
| * insert operation on every item. | |
| * | |
| * This function must be called with the AIL lock held. The lock is dropped | |
| * before returning. | |
| */ | |
| void | |
| xfs_trans_ail_update_bulk( | |
| struct xfs_ail *ailp, | |
| struct xfs_ail_cursor *cur, | |
| struct xfs_log_item **log_items, | |
| int nr_items, | |
| xfs_lsn_t lsn) __releases(ailp->xa_lock) | |
| { | |
| xfs_log_item_t *mlip; | |
| int mlip_changed = 0; | |
| int i; | |
| LIST_HEAD(tmp); | |
| ASSERT(nr_items > 0); /* Not required, but true. */ | |
| mlip = xfs_ail_min(ailp); | |
| for (i = 0; i < nr_items; i++) { | |
| struct xfs_log_item *lip = log_items[i]; | |
| if (lip->li_flags & XFS_LI_IN_AIL) { | |
| /* check if we really need to move the item */ | |
| if (XFS_LSN_CMP(lsn, lip->li_lsn) <= 0) | |
| continue; | |
| trace_xfs_ail_move(lip, lip->li_lsn, lsn); | |
| xfs_ail_delete(ailp, lip); | |
| if (mlip == lip) | |
| mlip_changed = 1; | |
| } else { | |
| lip->li_flags |= XFS_LI_IN_AIL; | |
| trace_xfs_ail_insert(lip, 0, lsn); | |
| } | |
| lip->li_lsn = lsn; | |
| list_add(&lip->li_ail, &tmp); | |
| } | |
| if (!list_empty(&tmp)) | |
| xfs_ail_splice(ailp, cur, &tmp, lsn); | |
| if (mlip_changed) { | |
| if (!XFS_FORCED_SHUTDOWN(ailp->xa_mount)) | |
| xlog_assign_tail_lsn_locked(ailp->xa_mount); | |
| spin_unlock(&ailp->xa_lock); | |
| xfs_log_space_wake(ailp->xa_mount); | |
| } else { | |
| spin_unlock(&ailp->xa_lock); | |
| } | |
| } | |
| /* | |
| * xfs_trans_ail_delete_bulk - remove multiple log items from the AIL | |
| * | |
| * @xfs_trans_ail_delete_bulk takes an array of log items that all need to | |
| * removed from the AIL. The caller is already holding the AIL lock, and done | |
| * all the checks necessary to ensure the items passed in via @log_items are | |
| * ready for deletion. This includes checking that the items are in the AIL. | |
| * | |
| * For each log item to be removed, unlink it from the AIL, clear the IN_AIL | |
| * flag from the item and reset the item's lsn to 0. If we remove the first | |
| * item in the AIL, update the log tail to match the new minimum LSN in the | |
| * AIL. | |
| * | |
| * This function will not drop the AIL lock until all items are removed from | |
| * the AIL to minimise the amount of lock traffic on the AIL. This does not | |
| * greatly increase the AIL hold time, but does significantly reduce the amount | |
| * of traffic on the lock, especially during IO completion. | |
| * | |
| * This function must be called with the AIL lock held. The lock is dropped | |
| * before returning. | |
| */ | |
| void | |
| xfs_trans_ail_delete_bulk( | |
| struct xfs_ail *ailp, | |
| struct xfs_log_item **log_items, | |
| int nr_items, | |
| int shutdown_type) __releases(ailp->xa_lock) | |
| { | |
| xfs_log_item_t *mlip; | |
| int mlip_changed = 0; | |
| int i; | |
| mlip = xfs_ail_min(ailp); | |
| for (i = 0; i < nr_items; i++) { | |
| struct xfs_log_item *lip = log_items[i]; | |
| if (!(lip->li_flags & XFS_LI_IN_AIL)) { | |
| struct xfs_mount *mp = ailp->xa_mount; | |
| spin_unlock(&ailp->xa_lock); | |
| if (!XFS_FORCED_SHUTDOWN(mp)) { | |
| xfs_alert_tag(mp, XFS_PTAG_AILDELETE, | |
| "%s: attempting to delete a log item that is not in the AIL", | |
| __func__); | |
| xfs_force_shutdown(mp, shutdown_type); | |
| } | |
| return; | |
| } | |
| trace_xfs_ail_delete(lip, mlip->li_lsn, lip->li_lsn); | |
| xfs_ail_delete(ailp, lip); | |
| lip->li_flags &= ~XFS_LI_IN_AIL; | |
| lip->li_lsn = 0; | |
| if (mlip == lip) | |
| mlip_changed = 1; | |
| } | |
| if (mlip_changed) { | |
| if (!XFS_FORCED_SHUTDOWN(ailp->xa_mount)) | |
| xlog_assign_tail_lsn_locked(ailp->xa_mount); | |
| if (list_empty(&ailp->xa_ail)) | |
| wake_up_all(&ailp->xa_empty); | |
| spin_unlock(&ailp->xa_lock); | |
| xfs_log_space_wake(ailp->xa_mount); | |
| } else { | |
| spin_unlock(&ailp->xa_lock); | |
| } | |
| } | |
| int | |
| xfs_trans_ail_init( | |
| xfs_mount_t *mp) | |
| { | |
| struct xfs_ail *ailp; | |
| ailp = kmem_zalloc(sizeof(struct xfs_ail), KM_MAYFAIL); | |
| if (!ailp) | |
| return -ENOMEM; | |
| ailp->xa_mount = mp; | |
| INIT_LIST_HEAD(&ailp->xa_ail); | |
| INIT_LIST_HEAD(&ailp->xa_cursors); | |
| spin_lock_init(&ailp->xa_lock); | |
| INIT_LIST_HEAD(&ailp->xa_buf_list); | |
| init_waitqueue_head(&ailp->xa_empty); | |
| ailp->xa_task = kthread_run(xfsaild, ailp, "xfsaild/%s", | |
| ailp->xa_mount->m_fsname); | |
| if (IS_ERR(ailp->xa_task)) | |
| goto out_free_ailp; | |
| mp->m_ail = ailp; | |
| return 0; | |
| out_free_ailp: | |
| kmem_free(ailp); | |
| return -ENOMEM; | |
| } | |
| void | |
| xfs_trans_ail_destroy( | |
| xfs_mount_t *mp) | |
| { | |
| struct xfs_ail *ailp = mp->m_ail; | |
| kthread_stop(ailp->xa_task); | |
| kmem_free(ailp); | |
| } |