| #include <linux/module.h> | |
| #include <linux/glob.h> | |
| /* | |
| * The only reason this code can be compiled as a module is because the | |
| * ATA code that depends on it can be as well. In practice, they're | |
| * both usually compiled in and the module overhead goes away. | |
| */ | |
| MODULE_DESCRIPTION("glob(7) matching"); | |
| MODULE_LICENSE("Dual MIT/GPL"); | |
| /** | |
| * glob_match - Shell-style pattern matching, like !fnmatch(pat, str, 0) | |
| * @pat: Shell-style pattern to match, e.g. "*.[ch]". | |
| * @str: String to match. The pattern must match the entire string. | |
| * | |
| * Perform shell-style glob matching, returning true (1) if the match | |
| * succeeds, or false (0) if it fails. Equivalent to !fnmatch(@pat, @str, 0). | |
| * | |
| * Pattern metacharacters are ?, *, [ and \. | |
| * (And, inside character classes, !, - and ].) | |
| * | |
| * This is small and simple implementation intended for device blacklists | |
| * where a string is matched against a number of patterns. Thus, it | |
| * does not preprocess the patterns. It is non-recursive, and run-time | |
| * is at most quadratic: strlen(@str)*strlen(@pat). | |
| * | |
| * An example of the worst case is glob_match("*aaaaa", "aaaaaaaaaa"); | |
| * it takes 6 passes over the pattern before matching the string. | |
| * | |
| * Like !fnmatch(@pat, @str, 0) and unlike the shell, this does NOT | |
| * treat / or leading . specially; it isn't actually used for pathnames. | |
| * | |
| * Note that according to glob(7) (and unlike bash), character classes | |
| * are complemented by a leading !; this does not support the regex-style | |
| * [^a-z] syntax. | |
| * | |
| * An opening bracket without a matching close is matched literally. | |
| */ | |
| bool __pure glob_match(char const *pat, char const *str) | |
| { | |
| /* | |
| * Backtrack to previous * on mismatch and retry starting one | |
| * character later in the string. Because * matches all characters | |
| * (no exception for /), it can be easily proved that there's | |
| * never a need to backtrack multiple levels. | |
| */ | |
| char const *back_pat = NULL, *back_str = back_str; | |
| /* | |
| * Loop over each token (character or class) in pat, matching | |
| * it against the remaining unmatched tail of str. Return false | |
| * on mismatch, or true after matching the trailing nul bytes. | |
| */ | |
| for (;;) { | |
| unsigned char c = *str++; | |
| unsigned char d = *pat++; | |
| switch (d) { | |
| case '?': /* Wildcard: anything but nul */ | |
| if (c == '\0') | |
| return false; | |
| break; | |
| case '*': /* Any-length wildcard */ | |
| if (*pat == '\0') /* Optimize trailing * case */ | |
| return true; | |
| back_pat = pat; | |
| back_str = --str; /* Allow zero-length match */ | |
| break; | |
| case '[': { /* Character class */ | |
| bool match = false, inverted = (*pat == '!'); | |
| char const *class = pat + inverted; | |
| unsigned char a = *class++; | |
| /* | |
| * Iterate over each span in the character class. | |
| * A span is either a single character a, or a | |
| * range a-b. The first span may begin with ']'. | |
| */ | |
| do { | |
| unsigned char b = a; | |
| if (a == '\0') /* Malformed */ | |
| goto literal; | |
| if (class[0] == '-' && class[1] != ']') { | |
| b = class[1]; | |
| if (b == '\0') | |
| goto literal; | |
| class += 2; | |
| /* Any special action if a > b? */ | |
| } | |
| match |= (a <= c && c <= b); | |
| } while ((a = *class++) != ']'); | |
| if (match == inverted) | |
| goto backtrack; | |
| pat = class; | |
| } | |
| break; | |
| case '\\': | |
| d = *pat++; | |
| /*FALLTHROUGH*/ | |
| default: /* Literal character */ | |
| literal: | |
| if (c == d) { | |
| if (d == '\0') | |
| return true; | |
| break; | |
| } | |
| backtrack: | |
| if (c == '\0' || !back_pat) | |
| return false; /* No point continuing */ | |
| /* Try again from last *, one character later in str. */ | |
| pat = back_pat; | |
| str = ++back_str; | |
| break; | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(glob_match); | |
| #ifdef CONFIG_GLOB_SELFTEST | |
| #include <linux/printk.h> | |
| #include <linux/moduleparam.h> | |
| /* Boot with "glob.verbose=1" to show successful tests, too */ | |
| static bool verbose = false; | |
| module_param(verbose, bool, 0); | |
| struct glob_test { | |
| char const *pat, *str; | |
| bool expected; | |
| }; | |
| static bool __pure __init test(char const *pat, char const *str, bool expected) | |
| { | |
| bool match = glob_match(pat, str); | |
| bool success = match == expected; | |
| /* Can't get string literals into a particular section, so... */ | |
| static char const msg_error[] __initconst = | |
| KERN_ERR "glob: \"%s\" vs. \"%s\": %s *** ERROR ***\n"; | |
| static char const msg_ok[] __initconst = | |
| KERN_DEBUG "glob: \"%s\" vs. \"%s\": %s OK\n"; | |
| static char const mismatch[] __initconst = "mismatch"; | |
| char const *message; | |
| if (!success) | |
| message = msg_error; | |
| else if (verbose) | |
| message = msg_ok; | |
| else | |
| return success; | |
| printk(message, pat, str, mismatch + 3*match); | |
| return success; | |
| } | |
| /* | |
| * The tests are all jammed together in one array to make it simpler | |
| * to place that array in the .init.rodata section. The obvious | |
| * "array of structures containing char *" has no way to force the | |
| * pointed-to strings to be in a particular section. | |
| * | |
| * Anyway, a test consists of: | |
| * 1. Expected glob_match result: '1' or '0'. | |
| * 2. Pattern to match: null-terminated string | |
| * 3. String to match against: null-terminated string | |
| * | |
| * The list of tests is terminated with a final '\0' instead of | |
| * a glob_match result character. | |
| */ | |
| static char const glob_tests[] __initconst = | |
| /* Some basic tests */ | |
| "1" "a\0" "a\0" | |
| "0" "a\0" "b\0" | |
| "0" "a\0" "aa\0" | |
| "0" "a\0" "\0" | |
| "1" "\0" "\0" | |
| "0" "\0" "a\0" | |
| /* Simple character class tests */ | |
| "1" "[a]\0" "a\0" | |
| "0" "[a]\0" "b\0" | |
| "0" "[!a]\0" "a\0" | |
| "1" "[!a]\0" "b\0" | |
| "1" "[ab]\0" "a\0" | |
| "1" "[ab]\0" "b\0" | |
| "0" "[ab]\0" "c\0" | |
| "1" "[!ab]\0" "c\0" | |
| "1" "[a-c]\0" "b\0" | |
| "0" "[a-c]\0" "d\0" | |
| /* Corner cases in character class parsing */ | |
| "1" "[a-c-e-g]\0" "-\0" | |
| "0" "[a-c-e-g]\0" "d\0" | |
| "1" "[a-c-e-g]\0" "f\0" | |
| "1" "[]a-ceg-ik[]\0" "a\0" | |
| "1" "[]a-ceg-ik[]\0" "]\0" | |
| "1" "[]a-ceg-ik[]\0" "[\0" | |
| "1" "[]a-ceg-ik[]\0" "h\0" | |
| "0" "[]a-ceg-ik[]\0" "f\0" | |
| "0" "[!]a-ceg-ik[]\0" "h\0" | |
| "0" "[!]a-ceg-ik[]\0" "]\0" | |
| "1" "[!]a-ceg-ik[]\0" "f\0" | |
| /* Simple wild cards */ | |
| "1" "?\0" "a\0" | |
| "0" "?\0" "aa\0" | |
| "0" "??\0" "a\0" | |
| "1" "?x?\0" "axb\0" | |
| "0" "?x?\0" "abx\0" | |
| "0" "?x?\0" "xab\0" | |
| /* Asterisk wild cards (backtracking) */ | |
| "0" "*??\0" "a\0" | |
| "1" "*??\0" "ab\0" | |
| "1" "*??\0" "abc\0" | |
| "1" "*??\0" "abcd\0" | |
| "0" "??*\0" "a\0" | |
| "1" "??*\0" "ab\0" | |
| "1" "??*\0" "abc\0" | |
| "1" "??*\0" "abcd\0" | |
| "0" "?*?\0" "a\0" | |
| "1" "?*?\0" "ab\0" | |
| "1" "?*?\0" "abc\0" | |
| "1" "?*?\0" "abcd\0" | |
| "1" "*b\0" "b\0" | |
| "1" "*b\0" "ab\0" | |
| "0" "*b\0" "ba\0" | |
| "1" "*b\0" "bb\0" | |
| "1" "*b\0" "abb\0" | |
| "1" "*b\0" "bab\0" | |
| "1" "*bc\0" "abbc\0" | |
| "1" "*bc\0" "bc\0" | |
| "1" "*bc\0" "bbc\0" | |
| "1" "*bc\0" "bcbc\0" | |
| /* Multiple asterisks (complex backtracking) */ | |
| "1" "*ac*\0" "abacadaeafag\0" | |
| "1" "*ac*ae*ag*\0" "abacadaeafag\0" | |
| "1" "*a*b*[bc]*[ef]*g*\0" "abacadaeafag\0" | |
| "0" "*a*b*[ef]*[cd]*g*\0" "abacadaeafag\0" | |
| "1" "*abcd*\0" "abcabcabcabcdefg\0" | |
| "1" "*ab*cd*\0" "abcabcabcabcdefg\0" | |
| "1" "*abcd*abcdef*\0" "abcabcdabcdeabcdefg\0" | |
| "0" "*abcd*\0" "abcabcabcabcefg\0" | |
| "0" "*ab*cd*\0" "abcabcabcabcefg\0"; | |
| static int __init glob_init(void) | |
| { | |
| unsigned successes = 0; | |
| unsigned n = 0; | |
| char const *p = glob_tests; | |
| static char const message[] __initconst = | |
| KERN_INFO "glob: %u self-tests passed, %u failed\n"; | |
| /* | |
| * Tests are jammed together in a string. The first byte is '1' | |
| * or '0' to indicate the expected outcome, or '\0' to indicate the | |
| * end of the tests. Then come two null-terminated strings: the | |
| * pattern and the string to match it against. | |
| */ | |
| while (*p) { | |
| bool expected = *p++ & 1; | |
| char const *pat = p; | |
| p += strlen(p) + 1; | |
| successes += test(pat, p, expected); | |
| p += strlen(p) + 1; | |
| n++; | |
| } | |
| n -= successes; | |
| printk(message, successes, n); | |
| /* What's the errno for "kernel bug detected"? Guess... */ | |
| return n ? -ECANCELED : 0; | |
| } | |
| /* We need a dummy exit function to allow unload */ | |
| static void __exit glob_fini(void) { } | |
| module_init(glob_init); | |
| module_exit(glob_fini); | |
| #endif /* CONFIG_GLOB_SELFTEST */ |