| /* | |
| * net/dccp/output.c | |
| * | |
| * An implementation of the DCCP protocol | |
| * Arnaldo Carvalho de Melo <acme@conectiva.com.br> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/dccp.h> | |
| #include <linux/kernel.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/slab.h> | |
| #include <net/inet_sock.h> | |
| #include <net/sock.h> | |
| #include "ackvec.h" | |
| #include "ccid.h" | |
| #include "dccp.h" | |
| static inline void dccp_event_ack_sent(struct sock *sk) | |
| { | |
| inet_csk_clear_xmit_timer(sk, ICSK_TIME_DACK); | |
| } | |
| /* enqueue @skb on sk_send_head for retransmission, return clone to send now */ | |
| static struct sk_buff *dccp_skb_entail(struct sock *sk, struct sk_buff *skb) | |
| { | |
| skb_set_owner_w(skb, sk); | |
| WARN_ON(sk->sk_send_head); | |
| sk->sk_send_head = skb; | |
| return skb_clone(sk->sk_send_head, gfp_any()); | |
| } | |
| /* | |
| * All SKB's seen here are completely headerless. It is our | |
| * job to build the DCCP header, and pass the packet down to | |
| * IP so it can do the same plus pass the packet off to the | |
| * device. | |
| */ | |
| static int dccp_transmit_skb(struct sock *sk, struct sk_buff *skb) | |
| { | |
| if (likely(skb != NULL)) { | |
| struct inet_sock *inet = inet_sk(sk); | |
| const struct inet_connection_sock *icsk = inet_csk(sk); | |
| struct dccp_sock *dp = dccp_sk(sk); | |
| struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb); | |
| struct dccp_hdr *dh; | |
| /* XXX For now we're using only 48 bits sequence numbers */ | |
| const u32 dccp_header_size = sizeof(*dh) + | |
| sizeof(struct dccp_hdr_ext) + | |
| dccp_packet_hdr_len(dcb->dccpd_type); | |
| int err, set_ack = 1; | |
| u64 ackno = dp->dccps_gsr; | |
| /* | |
| * Increment GSS here already in case the option code needs it. | |
| * Update GSS for real only if option processing below succeeds. | |
| */ | |
| dcb->dccpd_seq = ADD48(dp->dccps_gss, 1); | |
| switch (dcb->dccpd_type) { | |
| case DCCP_PKT_DATA: | |
| set_ack = 0; | |
| /* fall through */ | |
| case DCCP_PKT_DATAACK: | |
| case DCCP_PKT_RESET: | |
| break; | |
| case DCCP_PKT_REQUEST: | |
| set_ack = 0; | |
| /* Use ISS on the first (non-retransmitted) Request. */ | |
| if (icsk->icsk_retransmits == 0) | |
| dcb->dccpd_seq = dp->dccps_iss; | |
| /* fall through */ | |
| case DCCP_PKT_SYNC: | |
| case DCCP_PKT_SYNCACK: | |
| ackno = dcb->dccpd_ack_seq; | |
| /* fall through */ | |
| default: | |
| /* | |
| * Set owner/destructor: some skbs are allocated via | |
| * alloc_skb (e.g. when retransmission may happen). | |
| * Only Data, DataAck, and Reset packets should come | |
| * through here with skb->sk set. | |
| */ | |
| WARN_ON(skb->sk); | |
| skb_set_owner_w(skb, sk); | |
| break; | |
| } | |
| if (dccp_insert_options(sk, skb)) { | |
| kfree_skb(skb); | |
| return -EPROTO; | |
| } | |
| /* Build DCCP header and checksum it. */ | |
| dh = dccp_zeroed_hdr(skb, dccp_header_size); | |
| dh->dccph_type = dcb->dccpd_type; | |
| dh->dccph_sport = inet->inet_sport; | |
| dh->dccph_dport = inet->inet_dport; | |
| dh->dccph_doff = (dccp_header_size + dcb->dccpd_opt_len) / 4; | |
| dh->dccph_ccval = dcb->dccpd_ccval; | |
| dh->dccph_cscov = dp->dccps_pcslen; | |
| /* XXX For now we're using only 48 bits sequence numbers */ | |
| dh->dccph_x = 1; | |
| dccp_update_gss(sk, dcb->dccpd_seq); | |
| dccp_hdr_set_seq(dh, dp->dccps_gss); | |
| if (set_ack) | |
| dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), ackno); | |
| switch (dcb->dccpd_type) { | |
| case DCCP_PKT_REQUEST: | |
| dccp_hdr_request(skb)->dccph_req_service = | |
| dp->dccps_service; | |
| /* | |
| * Limit Ack window to ISS <= P.ackno <= GSS, so that | |
| * only Responses to Requests we sent are considered. | |
| */ | |
| dp->dccps_awl = dp->dccps_iss; | |
| break; | |
| case DCCP_PKT_RESET: | |
| dccp_hdr_reset(skb)->dccph_reset_code = | |
| dcb->dccpd_reset_code; | |
| break; | |
| } | |
| icsk->icsk_af_ops->send_check(sk, skb); | |
| if (set_ack) | |
| dccp_event_ack_sent(sk); | |
| DCCP_INC_STATS(DCCP_MIB_OUTSEGS); | |
| err = icsk->icsk_af_ops->queue_xmit(sk, skb, &inet->cork.fl); | |
| return net_xmit_eval(err); | |
| } | |
| return -ENOBUFS; | |
| } | |
| /** | |
| * dccp_determine_ccmps - Find out about CCID-specific packet-size limits | |
| * We only consider the HC-sender CCID for setting the CCMPS (RFC 4340, 14.), | |
| * since the RX CCID is restricted to feedback packets (Acks), which are small | |
| * in comparison with the data traffic. A value of 0 means "no current CCMPS". | |
| */ | |
| static u32 dccp_determine_ccmps(const struct dccp_sock *dp) | |
| { | |
| const struct ccid *tx_ccid = dp->dccps_hc_tx_ccid; | |
| if (tx_ccid == NULL || tx_ccid->ccid_ops == NULL) | |
| return 0; | |
| return tx_ccid->ccid_ops->ccid_ccmps; | |
| } | |
| unsigned int dccp_sync_mss(struct sock *sk, u32 pmtu) | |
| { | |
| struct inet_connection_sock *icsk = inet_csk(sk); | |
| struct dccp_sock *dp = dccp_sk(sk); | |
| u32 ccmps = dccp_determine_ccmps(dp); | |
| u32 cur_mps = ccmps ? min(pmtu, ccmps) : pmtu; | |
| /* Account for header lengths and IPv4/v6 option overhead */ | |
| cur_mps -= (icsk->icsk_af_ops->net_header_len + icsk->icsk_ext_hdr_len + | |
| sizeof(struct dccp_hdr) + sizeof(struct dccp_hdr_ext)); | |
| /* | |
| * Leave enough headroom for common DCCP header options. | |
| * This only considers options which may appear on DCCP-Data packets, as | |
| * per table 3 in RFC 4340, 5.8. When running out of space for other | |
| * options (eg. Ack Vector which can take up to 255 bytes), it is better | |
| * to schedule a separate Ack. Thus we leave headroom for the following: | |
| * - 1 byte for Slow Receiver (11.6) | |
| * - 6 bytes for Timestamp (13.1) | |
| * - 10 bytes for Timestamp Echo (13.3) | |
| * - 8 bytes for NDP count (7.7, when activated) | |
| * - 6 bytes for Data Checksum (9.3) | |
| * - %DCCPAV_MIN_OPTLEN bytes for Ack Vector size (11.4, when enabled) | |
| */ | |
| cur_mps -= roundup(1 + 6 + 10 + dp->dccps_send_ndp_count * 8 + 6 + | |
| (dp->dccps_hc_rx_ackvec ? DCCPAV_MIN_OPTLEN : 0), 4); | |
| /* And store cached results */ | |
| icsk->icsk_pmtu_cookie = pmtu; | |
| dp->dccps_mss_cache = cur_mps; | |
| return cur_mps; | |
| } | |
| EXPORT_SYMBOL_GPL(dccp_sync_mss); | |
| void dccp_write_space(struct sock *sk) | |
| { | |
| struct socket_wq *wq; | |
| rcu_read_lock(); | |
| wq = rcu_dereference(sk->sk_wq); | |
| if (skwq_has_sleeper(wq)) | |
| wake_up_interruptible(&wq->wait); | |
| /* Should agree with poll, otherwise some programs break */ | |
| if (sock_writeable(sk)) | |
| sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT); | |
| rcu_read_unlock(); | |
| } | |
| /** | |
| * dccp_wait_for_ccid - Await CCID send permission | |
| * @sk: socket to wait for | |
| * @delay: timeout in jiffies | |
| * | |
| * This is used by CCIDs which need to delay the send time in process context. | |
| */ | |
| static int dccp_wait_for_ccid(struct sock *sk, unsigned long delay) | |
| { | |
| DEFINE_WAIT(wait); | |
| long remaining; | |
| prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); | |
| sk->sk_write_pending++; | |
| release_sock(sk); | |
| remaining = schedule_timeout(delay); | |
| lock_sock(sk); | |
| sk->sk_write_pending--; | |
| finish_wait(sk_sleep(sk), &wait); | |
| if (signal_pending(current) || sk->sk_err) | |
| return -1; | |
| return remaining; | |
| } | |
| /** | |
| * dccp_xmit_packet - Send data packet under control of CCID | |
| * Transmits next-queued payload and informs CCID to account for the packet. | |
| */ | |
| static void dccp_xmit_packet(struct sock *sk) | |
| { | |
| int err, len; | |
| struct dccp_sock *dp = dccp_sk(sk); | |
| struct sk_buff *skb = dccp_qpolicy_pop(sk); | |
| if (unlikely(skb == NULL)) | |
| return; | |
| len = skb->len; | |
| if (sk->sk_state == DCCP_PARTOPEN) { | |
| const u32 cur_mps = dp->dccps_mss_cache - DCCP_FEATNEG_OVERHEAD; | |
| /* | |
| * See 8.1.5 - Handshake Completion. | |
| * | |
| * For robustness we resend Confirm options until the client has | |
| * entered OPEN. During the initial feature negotiation, the MPS | |
| * is smaller than usual, reduced by the Change/Confirm options. | |
| */ | |
| if (!list_empty(&dp->dccps_featneg) && len > cur_mps) { | |
| DCCP_WARN("Payload too large (%d) for featneg.\n", len); | |
| dccp_send_ack(sk); | |
| dccp_feat_list_purge(&dp->dccps_featneg); | |
| } | |
| inet_csk_schedule_ack(sk); | |
| inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, | |
| inet_csk(sk)->icsk_rto, | |
| DCCP_RTO_MAX); | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATAACK; | |
| } else if (dccp_ack_pending(sk)) { | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATAACK; | |
| } else { | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_DATA; | |
| } | |
| err = dccp_transmit_skb(sk, skb); | |
| if (err) | |
| dccp_pr_debug("transmit_skb() returned err=%d\n", err); | |
| /* | |
| * Register this one as sent even if an error occurred. To the remote | |
| * end a local packet drop is indistinguishable from network loss, i.e. | |
| * any local drop will eventually be reported via receiver feedback. | |
| */ | |
| ccid_hc_tx_packet_sent(dp->dccps_hc_tx_ccid, sk, len); | |
| /* | |
| * If the CCID needs to transfer additional header options out-of-band | |
| * (e.g. Ack Vectors or feature-negotiation options), it activates this | |
| * flag to schedule a Sync. The Sync will automatically incorporate all | |
| * currently pending header options, thus clearing the backlog. | |
| */ | |
| if (dp->dccps_sync_scheduled) | |
| dccp_send_sync(sk, dp->dccps_gsr, DCCP_PKT_SYNC); | |
| } | |
| /** | |
| * dccp_flush_write_queue - Drain queue at end of connection | |
| * Since dccp_sendmsg queues packets without waiting for them to be sent, it may | |
| * happen that the TX queue is not empty at the end of a connection. We give the | |
| * HC-sender CCID a grace period of up to @time_budget jiffies. If this function | |
| * returns with a non-empty write queue, it will be purged later. | |
| */ | |
| void dccp_flush_write_queue(struct sock *sk, long *time_budget) | |
| { | |
| struct dccp_sock *dp = dccp_sk(sk); | |
| struct sk_buff *skb; | |
| long delay, rc; | |
| while (*time_budget > 0 && (skb = skb_peek(&sk->sk_write_queue))) { | |
| rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb); | |
| switch (ccid_packet_dequeue_eval(rc)) { | |
| case CCID_PACKET_WILL_DEQUEUE_LATER: | |
| /* | |
| * If the CCID determines when to send, the next sending | |
| * time is unknown or the CCID may not even send again | |
| * (e.g. remote host crashes or lost Ack packets). | |
| */ | |
| DCCP_WARN("CCID did not manage to send all packets\n"); | |
| return; | |
| case CCID_PACKET_DELAY: | |
| delay = msecs_to_jiffies(rc); | |
| if (delay > *time_budget) | |
| return; | |
| rc = dccp_wait_for_ccid(sk, delay); | |
| if (rc < 0) | |
| return; | |
| *time_budget -= (delay - rc); | |
| /* check again if we can send now */ | |
| break; | |
| case CCID_PACKET_SEND_AT_ONCE: | |
| dccp_xmit_packet(sk); | |
| break; | |
| case CCID_PACKET_ERR: | |
| skb_dequeue(&sk->sk_write_queue); | |
| kfree_skb(skb); | |
| dccp_pr_debug("packet discarded due to err=%ld\n", rc); | |
| } | |
| } | |
| } | |
| void dccp_write_xmit(struct sock *sk) | |
| { | |
| struct dccp_sock *dp = dccp_sk(sk); | |
| struct sk_buff *skb; | |
| while ((skb = dccp_qpolicy_top(sk))) { | |
| int rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb); | |
| switch (ccid_packet_dequeue_eval(rc)) { | |
| case CCID_PACKET_WILL_DEQUEUE_LATER: | |
| return; | |
| case CCID_PACKET_DELAY: | |
| sk_reset_timer(sk, &dp->dccps_xmit_timer, | |
| jiffies + msecs_to_jiffies(rc)); | |
| return; | |
| case CCID_PACKET_SEND_AT_ONCE: | |
| dccp_xmit_packet(sk); | |
| break; | |
| case CCID_PACKET_ERR: | |
| dccp_qpolicy_drop(sk, skb); | |
| dccp_pr_debug("packet discarded due to err=%d\n", rc); | |
| } | |
| } | |
| } | |
| /** | |
| * dccp_retransmit_skb - Retransmit Request, Close, or CloseReq packets | |
| * There are only four retransmittable packet types in DCCP: | |
| * - Request in client-REQUEST state (sec. 8.1.1), | |
| * - CloseReq in server-CLOSEREQ state (sec. 8.3), | |
| * - Close in node-CLOSING state (sec. 8.3), | |
| * - Acks in client-PARTOPEN state (sec. 8.1.5, handled by dccp_delack_timer()). | |
| * This function expects sk->sk_send_head to contain the original skb. | |
| */ | |
| int dccp_retransmit_skb(struct sock *sk) | |
| { | |
| WARN_ON(sk->sk_send_head == NULL); | |
| if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk) != 0) | |
| return -EHOSTUNREACH; /* Routing failure or similar. */ | |
| /* this count is used to distinguish original and retransmitted skb */ | |
| inet_csk(sk)->icsk_retransmits++; | |
| return dccp_transmit_skb(sk, skb_clone(sk->sk_send_head, GFP_ATOMIC)); | |
| } | |
| struct sk_buff *dccp_make_response(const struct sock *sk, struct dst_entry *dst, | |
| struct request_sock *req) | |
| { | |
| struct dccp_hdr *dh; | |
| struct dccp_request_sock *dreq; | |
| const u32 dccp_header_size = sizeof(struct dccp_hdr) + | |
| sizeof(struct dccp_hdr_ext) + | |
| sizeof(struct dccp_hdr_response); | |
| struct sk_buff *skb; | |
| /* sk is marked const to clearly express we dont hold socket lock. | |
| * sock_wmalloc() will atomically change sk->sk_wmem_alloc, | |
| * it is safe to promote sk to non const. | |
| */ | |
| skb = sock_wmalloc((struct sock *)sk, MAX_DCCP_HEADER, 1, | |
| GFP_ATOMIC); | |
| if (!skb) | |
| return NULL; | |
| skb_reserve(skb, MAX_DCCP_HEADER); | |
| skb_dst_set(skb, dst_clone(dst)); | |
| dreq = dccp_rsk(req); | |
| if (inet_rsk(req)->acked) /* increase GSS upon retransmission */ | |
| dccp_inc_seqno(&dreq->dreq_gss); | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_RESPONSE; | |
| DCCP_SKB_CB(skb)->dccpd_seq = dreq->dreq_gss; | |
| /* Resolve feature dependencies resulting from choice of CCID */ | |
| if (dccp_feat_server_ccid_dependencies(dreq)) | |
| goto response_failed; | |
| if (dccp_insert_options_rsk(dreq, skb)) | |
| goto response_failed; | |
| /* Build and checksum header */ | |
| dh = dccp_zeroed_hdr(skb, dccp_header_size); | |
| dh->dccph_sport = htons(inet_rsk(req)->ir_num); | |
| dh->dccph_dport = inet_rsk(req)->ir_rmt_port; | |
| dh->dccph_doff = (dccp_header_size + | |
| DCCP_SKB_CB(skb)->dccpd_opt_len) / 4; | |
| dh->dccph_type = DCCP_PKT_RESPONSE; | |
| dh->dccph_x = 1; | |
| dccp_hdr_set_seq(dh, dreq->dreq_gss); | |
| dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), dreq->dreq_gsr); | |
| dccp_hdr_response(skb)->dccph_resp_service = dreq->dreq_service; | |
| dccp_csum_outgoing(skb); | |
| /* We use `acked' to remember that a Response was already sent. */ | |
| inet_rsk(req)->acked = 1; | |
| DCCP_INC_STATS(DCCP_MIB_OUTSEGS); | |
| return skb; | |
| response_failed: | |
| kfree_skb(skb); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(dccp_make_response); | |
| /* answer offending packet in @rcv_skb with Reset from control socket @ctl */ | |
| struct sk_buff *dccp_ctl_make_reset(struct sock *sk, struct sk_buff *rcv_skb) | |
| { | |
| struct dccp_hdr *rxdh = dccp_hdr(rcv_skb), *dh; | |
| struct dccp_skb_cb *dcb = DCCP_SKB_CB(rcv_skb); | |
| const u32 dccp_hdr_reset_len = sizeof(struct dccp_hdr) + | |
| sizeof(struct dccp_hdr_ext) + | |
| sizeof(struct dccp_hdr_reset); | |
| struct dccp_hdr_reset *dhr; | |
| struct sk_buff *skb; | |
| skb = alloc_skb(sk->sk_prot->max_header, GFP_ATOMIC); | |
| if (skb == NULL) | |
| return NULL; | |
| skb_reserve(skb, sk->sk_prot->max_header); | |
| /* Swap the send and the receive. */ | |
| dh = dccp_zeroed_hdr(skb, dccp_hdr_reset_len); | |
| dh->dccph_type = DCCP_PKT_RESET; | |
| dh->dccph_sport = rxdh->dccph_dport; | |
| dh->dccph_dport = rxdh->dccph_sport; | |
| dh->dccph_doff = dccp_hdr_reset_len / 4; | |
| dh->dccph_x = 1; | |
| dhr = dccp_hdr_reset(skb); | |
| dhr->dccph_reset_code = dcb->dccpd_reset_code; | |
| switch (dcb->dccpd_reset_code) { | |
| case DCCP_RESET_CODE_PACKET_ERROR: | |
| dhr->dccph_reset_data[0] = rxdh->dccph_type; | |
| break; | |
| case DCCP_RESET_CODE_OPTION_ERROR: /* fall through */ | |
| case DCCP_RESET_CODE_MANDATORY_ERROR: | |
| memcpy(dhr->dccph_reset_data, dcb->dccpd_reset_data, 3); | |
| break; | |
| } | |
| /* | |
| * From RFC 4340, 8.3.1: | |
| * If P.ackno exists, set R.seqno := P.ackno + 1. | |
| * Else set R.seqno := 0. | |
| */ | |
| if (dcb->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ) | |
| dccp_hdr_set_seq(dh, ADD48(dcb->dccpd_ack_seq, 1)); | |
| dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), dcb->dccpd_seq); | |
| dccp_csum_outgoing(skb); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL_GPL(dccp_ctl_make_reset); | |
| /* send Reset on established socket, to close or abort the connection */ | |
| int dccp_send_reset(struct sock *sk, enum dccp_reset_codes code) | |
| { | |
| struct sk_buff *skb; | |
| /* | |
| * FIXME: what if rebuild_header fails? | |
| * Should we be doing a rebuild_header here? | |
| */ | |
| int err = inet_csk(sk)->icsk_af_ops->rebuild_header(sk); | |
| if (err != 0) | |
| return err; | |
| skb = sock_wmalloc(sk, sk->sk_prot->max_header, 1, GFP_ATOMIC); | |
| if (skb == NULL) | |
| return -ENOBUFS; | |
| /* Reserve space for headers and prepare control bits. */ | |
| skb_reserve(skb, sk->sk_prot->max_header); | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_RESET; | |
| DCCP_SKB_CB(skb)->dccpd_reset_code = code; | |
| return dccp_transmit_skb(sk, skb); | |
| } | |
| /* | |
| * Do all connect socket setups that can be done AF independent. | |
| */ | |
| int dccp_connect(struct sock *sk) | |
| { | |
| struct sk_buff *skb; | |
| struct dccp_sock *dp = dccp_sk(sk); | |
| struct dst_entry *dst = __sk_dst_get(sk); | |
| struct inet_connection_sock *icsk = inet_csk(sk); | |
| sk->sk_err = 0; | |
| sock_reset_flag(sk, SOCK_DONE); | |
| dccp_sync_mss(sk, dst_mtu(dst)); | |
| /* do not connect if feature negotiation setup fails */ | |
| if (dccp_feat_finalise_settings(dccp_sk(sk))) | |
| return -EPROTO; | |
| /* Initialise GAR as per 8.5; AWL/AWH are set in dccp_transmit_skb() */ | |
| dp->dccps_gar = dp->dccps_iss; | |
| skb = alloc_skb(sk->sk_prot->max_header, sk->sk_allocation); | |
| if (unlikely(skb == NULL)) | |
| return -ENOBUFS; | |
| /* Reserve space for headers. */ | |
| skb_reserve(skb, sk->sk_prot->max_header); | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_REQUEST; | |
| dccp_transmit_skb(sk, dccp_skb_entail(sk, skb)); | |
| DCCP_INC_STATS(DCCP_MIB_ACTIVEOPENS); | |
| /* Timer for repeating the REQUEST until an answer. */ | |
| icsk->icsk_retransmits = 0; | |
| inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, | |
| icsk->icsk_rto, DCCP_RTO_MAX); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dccp_connect); | |
| void dccp_send_ack(struct sock *sk) | |
| { | |
| /* If we have been reset, we may not send again. */ | |
| if (sk->sk_state != DCCP_CLOSED) { | |
| struct sk_buff *skb = alloc_skb(sk->sk_prot->max_header, | |
| GFP_ATOMIC); | |
| if (skb == NULL) { | |
| inet_csk_schedule_ack(sk); | |
| inet_csk(sk)->icsk_ack.ato = TCP_ATO_MIN; | |
| inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, | |
| TCP_DELACK_MAX, | |
| DCCP_RTO_MAX); | |
| return; | |
| } | |
| /* Reserve space for headers */ | |
| skb_reserve(skb, sk->sk_prot->max_header); | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_ACK; | |
| dccp_transmit_skb(sk, skb); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(dccp_send_ack); | |
| #if 0 | |
| /* FIXME: Is this still necessary (11.3) - currently nowhere used by DCCP. */ | |
| void dccp_send_delayed_ack(struct sock *sk) | |
| { | |
| struct inet_connection_sock *icsk = inet_csk(sk); | |
| /* | |
| * FIXME: tune this timer. elapsed time fixes the skew, so no problem | |
| * with using 2s, and active senders also piggyback the ACK into a | |
| * DATAACK packet, so this is really for quiescent senders. | |
| */ | |
| unsigned long timeout = jiffies + 2 * HZ; | |
| /* Use new timeout only if there wasn't a older one earlier. */ | |
| if (icsk->icsk_ack.pending & ICSK_ACK_TIMER) { | |
| /* If delack timer was blocked or is about to expire, | |
| * send ACK now. | |
| * | |
| * FIXME: check the "about to expire" part | |
| */ | |
| if (icsk->icsk_ack.blocked) { | |
| dccp_send_ack(sk); | |
| return; | |
| } | |
| if (!time_before(timeout, icsk->icsk_ack.timeout)) | |
| timeout = icsk->icsk_ack.timeout; | |
| } | |
| icsk->icsk_ack.pending |= ICSK_ACK_SCHED | ICSK_ACK_TIMER; | |
| icsk->icsk_ack.timeout = timeout; | |
| sk_reset_timer(sk, &icsk->icsk_delack_timer, timeout); | |
| } | |
| #endif | |
| void dccp_send_sync(struct sock *sk, const u64 ackno, | |
| const enum dccp_pkt_type pkt_type) | |
| { | |
| /* | |
| * We are not putting this on the write queue, so | |
| * dccp_transmit_skb() will set the ownership to this | |
| * sock. | |
| */ | |
| struct sk_buff *skb = alloc_skb(sk->sk_prot->max_header, GFP_ATOMIC); | |
| if (skb == NULL) { | |
| /* FIXME: how to make sure the sync is sent? */ | |
| DCCP_CRIT("could not send %s", dccp_packet_name(pkt_type)); | |
| return; | |
| } | |
| /* Reserve space for headers and prepare control bits. */ | |
| skb_reserve(skb, sk->sk_prot->max_header); | |
| DCCP_SKB_CB(skb)->dccpd_type = pkt_type; | |
| DCCP_SKB_CB(skb)->dccpd_ack_seq = ackno; | |
| /* | |
| * Clear the flag in case the Sync was scheduled for out-of-band data, | |
| * such as carrying a long Ack Vector. | |
| */ | |
| dccp_sk(sk)->dccps_sync_scheduled = 0; | |
| dccp_transmit_skb(sk, skb); | |
| } | |
| EXPORT_SYMBOL_GPL(dccp_send_sync); | |
| /* | |
| * Send a DCCP_PKT_CLOSE/CLOSEREQ. The caller locks the socket for us. This | |
| * cannot be allowed to fail queueing a DCCP_PKT_CLOSE/CLOSEREQ frame under | |
| * any circumstances. | |
| */ | |
| void dccp_send_close(struct sock *sk, const int active) | |
| { | |
| struct dccp_sock *dp = dccp_sk(sk); | |
| struct sk_buff *skb; | |
| const gfp_t prio = active ? GFP_KERNEL : GFP_ATOMIC; | |
| skb = alloc_skb(sk->sk_prot->max_header, prio); | |
| if (skb == NULL) | |
| return; | |
| /* Reserve space for headers and prepare control bits. */ | |
| skb_reserve(skb, sk->sk_prot->max_header); | |
| if (dp->dccps_role == DCCP_ROLE_SERVER && !dp->dccps_server_timewait) | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_CLOSEREQ; | |
| else | |
| DCCP_SKB_CB(skb)->dccpd_type = DCCP_PKT_CLOSE; | |
| if (active) { | |
| skb = dccp_skb_entail(sk, skb); | |
| /* | |
| * Retransmission timer for active-close: RFC 4340, 8.3 requires | |
| * to retransmit the Close/CloseReq until the CLOSING/CLOSEREQ | |
| * state can be left. The initial timeout is 2 RTTs. | |
| * Since RTT measurement is done by the CCIDs, there is no easy | |
| * way to get an RTT sample. The fallback RTT from RFC 4340, 3.4 | |
| * is too low (200ms); we use a high value to avoid unnecessary | |
| * retransmissions when the link RTT is > 0.2 seconds. | |
| * FIXME: Let main module sample RTTs and use that instead. | |
| */ | |
| inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, | |
| DCCP_TIMEOUT_INIT, DCCP_RTO_MAX); | |
| } | |
| dccp_transmit_skb(sk, skb); | |
| } |