sound/soc/intel/skylake/skl-sst-cldma.c

/*
 * skl-sst-cldma.c - Code Loader DMA handler
 *
 * Copyright (C) 2015, Intel Corporation.
 * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as version 2, as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 */

#include <linux/device.h>
#include <linux/mm.h>
#include <linux/kthread.h>
#include <linux/delay.h>
#include "../common/sst-dsp.h"
#include "../common/sst-dsp-priv.h"

static void skl_cldma_int_enable(struct sst_dsp *ctx)
{
	sst_dsp_shim_update_bits_unlocked(ctx, SKL_ADSP_REG_ADSPIC,
				SKL_ADSPIC_CL_DMA, SKL_ADSPIC_CL_DMA);
}

void skl_cldma_int_disable(struct sst_dsp *ctx)
{
	sst_dsp_shim_update_bits_unlocked(ctx,
			SKL_ADSP_REG_ADSPIC, SKL_ADSPIC_CL_DMA, 0);
}

static void skl_cldma_stream_run(struct sst_dsp  *ctx, bool enable)
{
	unsigned char val;
	int timeout;

	sst_dsp_shim_update_bits_unlocked(ctx,
			SKL_ADSP_REG_CL_SD_CTL,
			CL_SD_CTL_RUN_MASK, CL_SD_CTL_RUN(enable));

	udelay(3);
	timeout = 300;
	do {
		/* waiting for hardware to report that the stream Run bit set */
		val = sst_dsp_shim_read(ctx, SKL_ADSP_REG_CL_SD_CTL) &
			CL_SD_CTL_RUN_MASK;
		if (enable && val)
			break;
		else if (!enable && !val)
			break;
		udelay(3);
	} while (--timeout);

	if (timeout == 0)
		dev_err(ctx->dev, "Failed to set Run bit=%d enable=%d\n", val, enable);
}

static void skl_cldma_stream_clear(struct sst_dsp  *ctx)
{
	/* make sure Run bit is cleared before setting stream register */
	skl_cldma_stream_run(ctx, 0);

	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
				CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
				CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
				CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
				CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));

	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);

	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
}

/* Code loader helper APIs */
static void skl_cldma_setup_bdle(struct sst_dsp *ctx,
		struct snd_dma_buffer *dmab_data,
		u32 **bdlp, int size, int with_ioc)
{
	u32 *bdl = *bdlp;

	ctx->cl_dev.frags = 0;
	while (size > 0) {
		phys_addr_t addr = virt_to_phys(dmab_data->area +
				(ctx->cl_dev.frags * ctx->cl_dev.bufsize));

		bdl[0] = cpu_to_le32(lower_32_bits(addr));
		bdl[1] = cpu_to_le32(upper_32_bits(addr));

		bdl[2] = cpu_to_le32(ctx->cl_dev.bufsize);

		size -= ctx->cl_dev.bufsize;
		bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01);

		bdl += 4;
		ctx->cl_dev.frags++;
	}
}

/*
 * Setup controller
 * Configure the registers to update the dma buffer address and
 * enable interrupts.
 * Note: Using the channel 1 for transfer
 */
static void skl_cldma_setup_controller(struct sst_dsp  *ctx,
		struct snd_dma_buffer *dmab_bdl, unsigned int max_size,
		u32 count)
{
	skl_cldma_stream_clear(ctx);
	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL,
			CL_SD_BDLPLBA(dmab_bdl->addr));
	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU,
			CL_SD_BDLPUBA(dmab_bdl->addr));

	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, max_size);
	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, count - 1);
	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
			CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(1));
	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
			CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(1));
	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
			CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(1));
	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
			CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(FW_CL_STREAM_NUMBER));
}

static void skl_cldma_setup_spb(struct sst_dsp  *ctx,
		unsigned int size, bool enable)
{
	if (enable)
		sst_dsp_shim_update_bits_unlocked(ctx,
				SKL_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
				CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
				CL_SPBFIFO_SPBFCCTL_SPIBE(1));

	sst_dsp_shim_write_unlocked(ctx, SKL_ADSP_REG_CL_SPBFIFO_SPIB, size);
}

static void skl_cldma_cleanup_spb(struct sst_dsp  *ctx)
{
	sst_dsp_shim_update_bits_unlocked(ctx,
			SKL_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
			CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
			CL_SPBFIFO_SPBFCCTL_SPIBE(0));

	sst_dsp_shim_write_unlocked(ctx, SKL_ADSP_REG_CL_SPBFIFO_SPIB, 0);
}

static void skl_cldma_cleanup(struct sst_dsp  *ctx)
{
	skl_cldma_cleanup_spb(ctx);
	skl_cldma_stream_clear(ctx);

	ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
	ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl);
}

static int skl_cldma_wait_interruptible(struct sst_dsp *ctx)
{
	int ret = 0;

	if (!wait_event_timeout(ctx->cl_dev.wait_queue,
				ctx->cl_dev.wait_condition,
				msecs_to_jiffies(SKL_WAIT_TIMEOUT))) {
		dev_err(ctx->dev, "%s: Wait timeout\n", __func__);
		ret = -EIO;
		goto cleanup;
	}

	dev_dbg(ctx->dev, "%s: Event wake\n", __func__);
	if (ctx->cl_dev.wake_status != SKL_CL_DMA_BUF_COMPLETE) {
		dev_err(ctx->dev, "%s: DMA Error\n", __func__);
		ret = -EIO;
	}

cleanup:
	ctx->cl_dev.wake_status = SKL_CL_DMA_STATUS_NONE;
	return ret;
}

static void skl_cldma_stop(struct sst_dsp *ctx)
{
	skl_cldma_stream_run(ctx, false);
}

static void skl_cldma_fill_buffer(struct sst_dsp *ctx, unsigned int size,
		const void *curr_pos, bool intr_enable, bool trigger)
{
	dev_dbg(ctx->dev, "Size: %x, intr_enable: %d\n", size, intr_enable);
	dev_dbg(ctx->dev, "buf_pos_index:%d, trigger:%d\n",
			ctx->cl_dev.dma_buffer_offset, trigger);
	dev_dbg(ctx->dev, "spib position: %d\n", ctx->cl_dev.curr_spib_pos);

	/*
	 * Check if the size exceeds buffer boundary. If it exceeds
	 * max_buffer size, then copy till buffer size and then copy
	 * remaining buffer from the start of ring buffer.
	 */
	if (ctx->cl_dev.dma_buffer_offset + size > ctx->cl_dev.bufsize) {
		unsigned int size_b = ctx->cl_dev.bufsize -
					ctx->cl_dev.dma_buffer_offset;
		memcpy(ctx->cl_dev.dmab_data.area + ctx->cl_dev.dma_buffer_offset,
			curr_pos, size_b);
		size -= size_b;
		curr_pos += size_b;
		ctx->cl_dev.dma_buffer_offset = 0;
	}

	memcpy(ctx->cl_dev.dmab_data.area + ctx->cl_dev.dma_buffer_offset,
			curr_pos, size);

	if (ctx->cl_dev.curr_spib_pos == ctx->cl_dev.bufsize)
		ctx->cl_dev.dma_buffer_offset = 0;
	else
		ctx->cl_dev.dma_buffer_offset = ctx->cl_dev.curr_spib_pos;

	ctx->cl_dev.wait_condition = false;

	if (intr_enable)
		skl_cldma_int_enable(ctx);

	ctx->cl_dev.ops.cl_setup_spb(ctx, ctx->cl_dev.curr_spib_pos, trigger);
	if (trigger)
		ctx->cl_dev.ops.cl_trigger(ctx, true);
}

/*
 * The CL dma doesn't have any way to update the transfer status until a BDL
 * buffer is fully transferred
 *
 * So Copying is divided in two parts.
 * 1. Interrupt on buffer done where the size to be transferred is more than
 *    ring buffer size.
 * 2. Polling on fw register to identify if data left to transferred doesn't
 *    fill the ring buffer. Caller takes care of polling the required status
 *    register to identify the transfer status.
 */
static int
skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin, u32 total_size)
{
	int ret = 0;
	bool start = true;
	unsigned int excess_bytes;
	u32 size;
	unsigned int bytes_left = total_size;
	const void *curr_pos = bin;

	if (total_size <= 0)
		return -EINVAL;

	dev_dbg(ctx->dev, "%s: Total binary size: %u\n", __func__, bytes_left);

	while (bytes_left) {
		if (bytes_left > ctx->cl_dev.bufsize) {

			/*
			 * dma transfers only till the write pointer as
			 * updated in spib
			 */
			if (ctx->cl_dev.curr_spib_pos == 0)
				ctx->cl_dev.curr_spib_pos = ctx->cl_dev.bufsize;

			size = ctx->cl_dev.bufsize;
			skl_cldma_fill_buffer(ctx, size, curr_pos, true, start);

			start = false;
			ret = skl_cldma_wait_interruptible(ctx);
			if (ret < 0) {
				skl_cldma_stop(ctx);
				return ret;
			}

		} else {
			skl_cldma_int_disable(ctx);

			if ((ctx->cl_dev.curr_spib_pos + bytes_left)
							<= ctx->cl_dev.bufsize) {
				ctx->cl_dev.curr_spib_pos += bytes_left;
			} else {
				excess_bytes = bytes_left -
					(ctx->cl_dev.bufsize -
					ctx->cl_dev.curr_spib_pos);
				ctx->cl_dev.curr_spib_pos = excess_bytes;
			}

			size = bytes_left;
			skl_cldma_fill_buffer(ctx, size,
					curr_pos, false, start);
		}
		bytes_left -= size;
		curr_pos = curr_pos + size;
	}

	return ret;
}

void skl_cldma_process_intr(struct sst_dsp *ctx)
{
	u8 cl_dma_intr_status;

	cl_dma_intr_status =
		sst_dsp_shim_read_unlocked(ctx, SKL_ADSP_REG_CL_SD_STS);

	if (!(cl_dma_intr_status & SKL_CL_DMA_SD_INT_COMPLETE))
		ctx->cl_dev.wake_status = SKL_CL_DMA_ERR;
	else
		ctx->cl_dev.wake_status = SKL_CL_DMA_BUF_COMPLETE;

	ctx->cl_dev.wait_condition = true;
	wake_up(&ctx->cl_dev.wait_queue);
}

int skl_cldma_prepare(struct sst_dsp *ctx)
{
	int ret;
	u32 *bdl;

	ctx->cl_dev.bufsize = SKL_MAX_BUFFER_SIZE;

	/* Allocate cl ops */
	ctx->cl_dev.ops.cl_setup_bdle = skl_cldma_setup_bdle;
	ctx->cl_dev.ops.cl_setup_controller = skl_cldma_setup_controller;
	ctx->cl_dev.ops.cl_setup_spb = skl_cldma_setup_spb;
	ctx->cl_dev.ops.cl_cleanup_spb = skl_cldma_cleanup_spb;
	ctx->cl_dev.ops.cl_trigger = skl_cldma_stream_run;
	ctx->cl_dev.ops.cl_cleanup_controller = skl_cldma_cleanup;
	ctx->cl_dev.ops.cl_copy_to_dmabuf = skl_cldma_copy_to_buf;
	ctx->cl_dev.ops.cl_stop_dma = skl_cldma_stop;

	/* Allocate buffer*/
	ret = ctx->dsp_ops.alloc_dma_buf(ctx->dev,
			&ctx->cl_dev.dmab_data, ctx->cl_dev.bufsize);
	if (ret < 0) {
		dev_err(ctx->dev, "Alloc buffer for base fw failed: %x\n", ret);
		return ret;
	}
	/* Setup Code loader BDL */
	ret = ctx->dsp_ops.alloc_dma_buf(ctx->dev,
			&ctx->cl_dev.dmab_bdl, PAGE_SIZE);
	if (ret < 0) {
		dev_err(ctx->dev, "Alloc buffer for blde failed: %x\n", ret);
		ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
		return ret;
	}
	bdl = (u32 *)ctx->cl_dev.dmab_bdl.area;

	/* Allocate BDLs */
	ctx->cl_dev.ops.cl_setup_bdle(ctx, &ctx->cl_dev.dmab_data,
			&bdl, ctx->cl_dev.bufsize, 1);
	ctx->cl_dev.ops.cl_setup_controller(ctx, &ctx->cl_dev.dmab_bdl,
			ctx->cl_dev.bufsize, ctx->cl_dev.frags);

	ctx->cl_dev.curr_spib_pos = 0;
	ctx->cl_dev.dma_buffer_offset = 0;
	init_waitqueue_head(&ctx->cl_dev.wait_queue);

	return ret;
}