| /* | |
| * skl.c - Implementation of ASoC Intel SKL HD Audio driver | |
| * | |
| * Copyright (C) 2014-2015 Intel Corp | |
| * Author: Jeeja KP <jeeja.kp@intel.com> | |
| * | |
| * Derived mostly from Intel HDA driver with following copyrights: | |
| * Copyright (c) 2004 Takashi Iwai <tiwai@suse.de> | |
| * PeiSen Hou <pshou@realtek.com.tw> | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; version 2 of the License. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * General Public License for more details. | |
| * | |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/firmware.h> | |
| #include <sound/pcm.h> | |
| #include "../common/sst-acpi.h" | |
| #include <sound/hda_register.h> | |
| #include <sound/hdaudio.h> | |
| #include <sound/hda_i915.h> | |
| #include "skl.h" | |
| #include "skl-sst-dsp.h" | |
| #include "skl-sst-ipc.h" | |
| static struct skl_machine_pdata skl_dmic_data; | |
| /* | |
| * initialize the PCI registers | |
| */ | |
| static void skl_update_pci_byte(struct pci_dev *pci, unsigned int reg, | |
| unsigned char mask, unsigned char val) | |
| { | |
| unsigned char data; | |
| pci_read_config_byte(pci, reg, &data); | |
| data &= ~mask; | |
| data |= (val & mask); | |
| pci_write_config_byte(pci, reg, data); | |
| } | |
| static void skl_init_pci(struct skl *skl) | |
| { | |
| struct hdac_ext_bus *ebus = &skl->ebus; | |
| /* | |
| * Clear bits 0-2 of PCI register TCSEL (at offset 0x44) | |
| * TCSEL == Traffic Class Select Register, which sets PCI express QOS | |
| * Ensuring these bits are 0 clears playback static on some HD Audio | |
| * codecs. | |
| * The PCI register TCSEL is defined in the Intel manuals. | |
| */ | |
| dev_dbg(ebus_to_hbus(ebus)->dev, "Clearing TCSEL\n"); | |
| skl_update_pci_byte(skl->pci, AZX_PCIREG_TCSEL, 0x07, 0); | |
| } | |
| static void update_pci_dword(struct pci_dev *pci, | |
| unsigned int reg, u32 mask, u32 val) | |
| { | |
| u32 data = 0; | |
| pci_read_config_dword(pci, reg, &data); | |
| data &= ~mask; | |
| data |= (val & mask); | |
| pci_write_config_dword(pci, reg, data); | |
| } | |
| /* | |
| * skl_enable_miscbdcge - enable/dsiable CGCTL.MISCBDCGE bits | |
| * | |
| * @dev: device pointer | |
| * @enable: enable/disable flag | |
| */ | |
| static void skl_enable_miscbdcge(struct device *dev, bool enable) | |
| { | |
| struct pci_dev *pci = to_pci_dev(dev); | |
| u32 val; | |
| val = enable ? AZX_CGCTL_MISCBDCGE_MASK : 0; | |
| update_pci_dword(pci, AZX_PCIREG_CGCTL, AZX_CGCTL_MISCBDCGE_MASK, val); | |
| } | |
| /* | |
| * While performing reset, controller may not come back properly causing | |
| * issues, so recommendation is to set CGCTL.MISCBDCGE to 0 then do reset | |
| * (init chip) and then again set CGCTL.MISCBDCGE to 1 | |
| */ | |
| static int skl_init_chip(struct hdac_bus *bus, bool full_reset) | |
| { | |
| int ret; | |
| skl_enable_miscbdcge(bus->dev, false); | |
| ret = snd_hdac_bus_init_chip(bus, full_reset); | |
| skl_enable_miscbdcge(bus->dev, true); | |
| return ret; | |
| } | |
| /* called from IRQ */ | |
| static void skl_stream_update(struct hdac_bus *bus, struct hdac_stream *hstr) | |
| { | |
| snd_pcm_period_elapsed(hstr->substream); | |
| } | |
| static irqreturn_t skl_interrupt(int irq, void *dev_id) | |
| { | |
| struct hdac_ext_bus *ebus = dev_id; | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| u32 status; | |
| if (!pm_runtime_active(bus->dev)) | |
| return IRQ_NONE; | |
| spin_lock(&bus->reg_lock); | |
| status = snd_hdac_chip_readl(bus, INTSTS); | |
| if (status == 0 || status == 0xffffffff) { | |
| spin_unlock(&bus->reg_lock); | |
| return IRQ_NONE; | |
| } | |
| /* clear rirb int */ | |
| status = snd_hdac_chip_readb(bus, RIRBSTS); | |
| if (status & RIRB_INT_MASK) { | |
| if (status & RIRB_INT_RESPONSE) | |
| snd_hdac_bus_update_rirb(bus); | |
| snd_hdac_chip_writeb(bus, RIRBSTS, RIRB_INT_MASK); | |
| } | |
| spin_unlock(&bus->reg_lock); | |
| return snd_hdac_chip_readl(bus, INTSTS) ? IRQ_WAKE_THREAD : IRQ_HANDLED; | |
| } | |
| static irqreturn_t skl_threaded_handler(int irq, void *dev_id) | |
| { | |
| struct hdac_ext_bus *ebus = dev_id; | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| u32 status; | |
| status = snd_hdac_chip_readl(bus, INTSTS); | |
| snd_hdac_bus_handle_stream_irq(bus, status, skl_stream_update); | |
| return IRQ_HANDLED; | |
| } | |
| static int skl_acquire_irq(struct hdac_ext_bus *ebus, int do_disconnect) | |
| { | |
| struct skl *skl = ebus_to_skl(ebus); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| int ret; | |
| ret = request_threaded_irq(skl->pci->irq, skl_interrupt, | |
| skl_threaded_handler, | |
| IRQF_SHARED, | |
| KBUILD_MODNAME, ebus); | |
| if (ret) { | |
| dev_err(bus->dev, | |
| "unable to grab IRQ %d, disabling device\n", | |
| skl->pci->irq); | |
| return ret; | |
| } | |
| bus->irq = skl->pci->irq; | |
| pci_intx(skl->pci, 1); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int _skl_suspend(struct hdac_ext_bus *ebus) | |
| { | |
| struct skl *skl = ebus_to_skl(ebus); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| struct pci_dev *pci = to_pci_dev(bus->dev); | |
| int ret; | |
| snd_hdac_ext_bus_link_power_down_all(ebus); | |
| ret = skl_suspend_dsp(skl); | |
| if (ret < 0) | |
| return ret; | |
| snd_hdac_bus_stop_chip(bus); | |
| update_pci_dword(pci, AZX_PCIREG_PGCTL, | |
| AZX_PGCTL_LSRMD_MASK, AZX_PGCTL_LSRMD_MASK); | |
| skl_enable_miscbdcge(bus->dev, false); | |
| snd_hdac_bus_enter_link_reset(bus); | |
| skl_enable_miscbdcge(bus->dev, true); | |
| skl_cleanup_resources(skl); | |
| return 0; | |
| } | |
| static int _skl_resume(struct hdac_ext_bus *ebus) | |
| { | |
| struct skl *skl = ebus_to_skl(ebus); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| skl_init_pci(skl); | |
| skl_init_chip(bus, true); | |
| return skl_resume_dsp(skl); | |
| } | |
| #endif | |
| #ifdef CONFIG_PM_SLEEP | |
| /* | |
| * power management | |
| */ | |
| static int skl_suspend(struct device *dev) | |
| { | |
| struct pci_dev *pci = to_pci_dev(dev); | |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); | |
| struct skl *skl = ebus_to_skl(ebus); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| int ret = 0; | |
| /* | |
| * Do not suspend if streams which are marked ignore suspend are | |
| * running, we need to save the state for these and continue | |
| */ | |
| if (skl->supend_active) { | |
| /* turn off the links and stop the CORB/RIRB DMA if it is On */ | |
| snd_hdac_ext_bus_link_power_down_all(ebus); | |
| if (ebus->cmd_dma_state) | |
| snd_hdac_bus_stop_cmd_io(&ebus->bus); | |
| enable_irq_wake(bus->irq); | |
| pci_save_state(pci); | |
| pci_disable_device(pci); | |
| } else { | |
| ret = _skl_suspend(ebus); | |
| if (ret < 0) | |
| return ret; | |
| skl->skl_sst->fw_loaded = false; | |
| } | |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { | |
| ret = snd_hdac_display_power(bus, false); | |
| if (ret < 0) | |
| dev_err(bus->dev, | |
| "Cannot turn OFF display power on i915\n"); | |
| } | |
| return ret; | |
| } | |
| static int skl_resume(struct device *dev) | |
| { | |
| struct pci_dev *pci = to_pci_dev(dev); | |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); | |
| struct skl *skl = ebus_to_skl(ebus); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| struct hdac_ext_link *hlink = NULL; | |
| int ret; | |
| /* Turned OFF in HDMI codec driver after codec reconfiguration */ | |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { | |
| ret = snd_hdac_display_power(bus, true); | |
| if (ret < 0) { | |
| dev_err(bus->dev, | |
| "Cannot turn on display power on i915\n"); | |
| return ret; | |
| } | |
| } | |
| /* | |
| * resume only when we are not in suspend active, otherwise need to | |
| * restore the device | |
| */ | |
| if (skl->supend_active) { | |
| pci_restore_state(pci); | |
| ret = pci_enable_device(pci); | |
| snd_hdac_ext_bus_link_power_up_all(ebus); | |
| disable_irq_wake(bus->irq); | |
| /* | |
| * turn On the links which are On before active suspend | |
| * and start the CORB/RIRB DMA if On before | |
| * active suspend. | |
| */ | |
| list_for_each_entry(hlink, &ebus->hlink_list, list) { | |
| if (hlink->ref_count) | |
| snd_hdac_ext_bus_link_power_up(hlink); | |
| } | |
| if (ebus->cmd_dma_state) | |
| snd_hdac_bus_init_cmd_io(&ebus->bus); | |
| } else { | |
| ret = _skl_resume(ebus); | |
| /* turn off the links which are off before suspend */ | |
| list_for_each_entry(hlink, &ebus->hlink_list, list) { | |
| if (!hlink->ref_count) | |
| snd_hdac_ext_bus_link_power_down(hlink); | |
| } | |
| if (!ebus->cmd_dma_state) | |
| snd_hdac_bus_stop_cmd_io(&ebus->bus); | |
| } | |
| return ret; | |
| } | |
| #endif /* CONFIG_PM_SLEEP */ | |
| #ifdef CONFIG_PM | |
| static int skl_runtime_suspend(struct device *dev) | |
| { | |
| struct pci_dev *pci = to_pci_dev(dev); | |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| dev_dbg(bus->dev, "in %s\n", __func__); | |
| return _skl_suspend(ebus); | |
| } | |
| static int skl_runtime_resume(struct device *dev) | |
| { | |
| struct pci_dev *pci = to_pci_dev(dev); | |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| dev_dbg(bus->dev, "in %s\n", __func__); | |
| return _skl_resume(ebus); | |
| } | |
| #endif /* CONFIG_PM */ | |
| static const struct dev_pm_ops skl_pm = { | |
| SET_SYSTEM_SLEEP_PM_OPS(skl_suspend, skl_resume) | |
| SET_RUNTIME_PM_OPS(skl_runtime_suspend, skl_runtime_resume, NULL) | |
| }; | |
| /* | |
| * destructor | |
| */ | |
| static int skl_free(struct hdac_ext_bus *ebus) | |
| { | |
| struct skl *skl = ebus_to_skl(ebus); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| skl->init_failed = 1; /* to be sure */ | |
| snd_hdac_ext_stop_streams(ebus); | |
| if (bus->irq >= 0) | |
| free_irq(bus->irq, (void *)bus); | |
| snd_hdac_bus_free_stream_pages(bus); | |
| snd_hdac_stream_free_all(ebus); | |
| snd_hdac_link_free_all(ebus); | |
| if (bus->remap_addr) | |
| iounmap(bus->remap_addr); | |
| pci_release_regions(skl->pci); | |
| pci_disable_device(skl->pci); | |
| snd_hdac_ext_bus_exit(ebus); | |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) | |
| snd_hdac_i915_exit(&ebus->bus); | |
| return 0; | |
| } | |
| static int skl_machine_device_register(struct skl *skl, void *driver_data) | |
| { | |
| struct hdac_bus *bus = ebus_to_hbus(&skl->ebus); | |
| struct platform_device *pdev; | |
| struct sst_acpi_mach *mach = driver_data; | |
| int ret; | |
| mach = sst_acpi_find_machine(mach); | |
| if (mach == NULL) { | |
| dev_err(bus->dev, "No matching machine driver found\n"); | |
| return -ENODEV; | |
| } | |
| skl->fw_name = mach->fw_filename; | |
| pdev = platform_device_alloc(mach->drv_name, -1); | |
| if (pdev == NULL) { | |
| dev_err(bus->dev, "platform device alloc failed\n"); | |
| return -EIO; | |
| } | |
| ret = platform_device_add(pdev); | |
| if (ret) { | |
| dev_err(bus->dev, "failed to add machine device\n"); | |
| platform_device_put(pdev); | |
| return -EIO; | |
| } | |
| if (mach->pdata) | |
| dev_set_drvdata(&pdev->dev, mach->pdata); | |
| skl->i2s_dev = pdev; | |
| return 0; | |
| } | |
| static void skl_machine_device_unregister(struct skl *skl) | |
| { | |
| if (skl->i2s_dev) | |
| platform_device_unregister(skl->i2s_dev); | |
| } | |
| static int skl_dmic_device_register(struct skl *skl) | |
| { | |
| struct hdac_bus *bus = ebus_to_hbus(&skl->ebus); | |
| struct platform_device *pdev; | |
| int ret; | |
| /* SKL has one dmic port, so allocate dmic device for this */ | |
| pdev = platform_device_alloc("dmic-codec", -1); | |
| if (!pdev) { | |
| dev_err(bus->dev, "failed to allocate dmic device\n"); | |
| return -ENOMEM; | |
| } | |
| ret = platform_device_add(pdev); | |
| if (ret) { | |
| dev_err(bus->dev, "failed to add dmic device: %d\n", ret); | |
| platform_device_put(pdev); | |
| return ret; | |
| } | |
| skl->dmic_dev = pdev; | |
| return 0; | |
| } | |
| static void skl_dmic_device_unregister(struct skl *skl) | |
| { | |
| if (skl->dmic_dev) | |
| platform_device_unregister(skl->dmic_dev); | |
| } | |
| /* | |
| * Probe the given codec address | |
| */ | |
| static int probe_codec(struct hdac_ext_bus *ebus, int addr) | |
| { | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) | | |
| (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; | |
| unsigned int res; | |
| mutex_lock(&bus->cmd_mutex); | |
| snd_hdac_bus_send_cmd(bus, cmd); | |
| snd_hdac_bus_get_response(bus, addr, &res); | |
| mutex_unlock(&bus->cmd_mutex); | |
| if (res == -1) | |
| return -EIO; | |
| dev_dbg(bus->dev, "codec #%d probed OK\n", addr); | |
| return snd_hdac_ext_bus_device_init(ebus, addr); | |
| } | |
| /* Codec initialization */ | |
| static int skl_codec_create(struct hdac_ext_bus *ebus) | |
| { | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| int c, max_slots; | |
| max_slots = HDA_MAX_CODECS; | |
| /* First try to probe all given codec slots */ | |
| for (c = 0; c < max_slots; c++) { | |
| if ((bus->codec_mask & (1 << c))) { | |
| if (probe_codec(ebus, c) < 0) { | |
| /* | |
| * Some BIOSen give you wrong codec addresses | |
| * that don't exist | |
| */ | |
| dev_warn(bus->dev, | |
| "Codec #%d probe error; disabling it...\n", c); | |
| bus->codec_mask &= ~(1 << c); | |
| /* | |
| * More badly, accessing to a non-existing | |
| * codec often screws up the controller bus, | |
| * and disturbs the further communications. | |
| * Thus if an error occurs during probing, | |
| * better to reset the controller bus to get | |
| * back to the sanity state. | |
| */ | |
| snd_hdac_bus_stop_chip(bus); | |
| skl_init_chip(bus, true); | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| static const struct hdac_bus_ops bus_core_ops = { | |
| .command = snd_hdac_bus_send_cmd, | |
| .get_response = snd_hdac_bus_get_response, | |
| }; | |
| /* | |
| * constructor | |
| */ | |
| static int skl_create(struct pci_dev *pci, | |
| const struct hdac_io_ops *io_ops, | |
| struct skl **rskl) | |
| { | |
| struct skl *skl; | |
| struct hdac_ext_bus *ebus; | |
| int err; | |
| *rskl = NULL; | |
| err = pci_enable_device(pci); | |
| if (err < 0) | |
| return err; | |
| skl = devm_kzalloc(&pci->dev, sizeof(*skl), GFP_KERNEL); | |
| if (!skl) { | |
| pci_disable_device(pci); | |
| return -ENOMEM; | |
| } | |
| ebus = &skl->ebus; | |
| snd_hdac_ext_bus_init(ebus, &pci->dev, &bus_core_ops, io_ops); | |
| ebus->bus.use_posbuf = 1; | |
| skl->pci = pci; | |
| ebus->bus.bdl_pos_adj = 0; | |
| *rskl = skl; | |
| return 0; | |
| } | |
| static int skl_i915_init(struct hdac_bus *bus) | |
| { | |
| int err; | |
| /* | |
| * The HDMI codec is in GPU so we need to ensure that it is powered | |
| * up and ready for probe | |
| */ | |
| err = snd_hdac_i915_init(bus); | |
| if (err < 0) | |
| return err; | |
| err = snd_hdac_display_power(bus, true); | |
| if (err < 0) { | |
| dev_err(bus->dev, "Cannot turn on display power on i915\n"); | |
| return err; | |
| } | |
| return err; | |
| } | |
| static int skl_first_init(struct hdac_ext_bus *ebus) | |
| { | |
| struct skl *skl = ebus_to_skl(ebus); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| struct pci_dev *pci = skl->pci; | |
| int err; | |
| unsigned short gcap; | |
| int cp_streams, pb_streams, start_idx; | |
| err = pci_request_regions(pci, "Skylake HD audio"); | |
| if (err < 0) | |
| return err; | |
| bus->addr = pci_resource_start(pci, 0); | |
| bus->remap_addr = pci_ioremap_bar(pci, 0); | |
| if (bus->remap_addr == NULL) { | |
| dev_err(bus->dev, "ioremap error\n"); | |
| return -ENXIO; | |
| } | |
| snd_hdac_bus_parse_capabilities(bus); | |
| if (skl_acquire_irq(ebus, 0) < 0) | |
| return -EBUSY; | |
| pci_set_master(pci); | |
| synchronize_irq(bus->irq); | |
| gcap = snd_hdac_chip_readw(bus, GCAP); | |
| dev_dbg(bus->dev, "chipset global capabilities = 0x%x\n", gcap); | |
| /* allow 64bit DMA address if supported by H/W */ | |
| if (!dma_set_mask(bus->dev, DMA_BIT_MASK(64))) { | |
| dma_set_coherent_mask(bus->dev, DMA_BIT_MASK(64)); | |
| } else { | |
| dma_set_mask(bus->dev, DMA_BIT_MASK(32)); | |
| dma_set_coherent_mask(bus->dev, DMA_BIT_MASK(32)); | |
| } | |
| /* read number of streams from GCAP register */ | |
| cp_streams = (gcap >> 8) & 0x0f; | |
| pb_streams = (gcap >> 12) & 0x0f; | |
| if (!pb_streams && !cp_streams) | |
| return -EIO; | |
| ebus->num_streams = cp_streams + pb_streams; | |
| /* initialize streams */ | |
| snd_hdac_ext_stream_init_all | |
| (ebus, 0, cp_streams, SNDRV_PCM_STREAM_CAPTURE); | |
| start_idx = cp_streams; | |
| snd_hdac_ext_stream_init_all | |
| (ebus, start_idx, pb_streams, SNDRV_PCM_STREAM_PLAYBACK); | |
| err = snd_hdac_bus_alloc_stream_pages(bus); | |
| if (err < 0) | |
| return err; | |
| /* initialize chip */ | |
| skl_init_pci(skl); | |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { | |
| err = skl_i915_init(bus); | |
| if (err < 0) | |
| return err; | |
| } | |
| skl_init_chip(bus, true); | |
| /* codec detection */ | |
| if (!bus->codec_mask) { | |
| dev_info(bus->dev, "no hda codecs found!\n"); | |
| } | |
| return 0; | |
| } | |
| static int skl_probe(struct pci_dev *pci, | |
| const struct pci_device_id *pci_id) | |
| { | |
| struct skl *skl; | |
| struct hdac_ext_bus *ebus = NULL; | |
| struct hdac_bus *bus = NULL; | |
| struct hdac_ext_link *hlink = NULL; | |
| int err; | |
| /* we use ext core ops, so provide NULL for ops here */ | |
| err = skl_create(pci, NULL, &skl); | |
| if (err < 0) | |
| return err; | |
| ebus = &skl->ebus; | |
| bus = ebus_to_hbus(ebus); | |
| err = skl_first_init(ebus); | |
| if (err < 0) | |
| goto out_free; | |
| skl->pci_id = pci->device; | |
| device_disable_async_suspend(bus->dev); | |
| skl->nhlt = skl_nhlt_init(bus->dev); | |
| if (skl->nhlt == NULL) { | |
| err = -ENODEV; | |
| goto out_display_power_off; | |
| } | |
| skl_nhlt_update_topology_bin(skl); | |
| pci_set_drvdata(skl->pci, ebus); | |
| skl_dmic_data.dmic_num = skl_get_dmic_geo(skl); | |
| /* check if dsp is there */ | |
| if (bus->ppcap) { | |
| err = skl_machine_device_register(skl, | |
| (void *)pci_id->driver_data); | |
| if (err < 0) | |
| goto out_nhlt_free; | |
| err = skl_init_dsp(skl); | |
| if (err < 0) { | |
| dev_dbg(bus->dev, "error failed to register dsp\n"); | |
| goto out_mach_free; | |
| } | |
| skl->skl_sst->enable_miscbdcge = skl_enable_miscbdcge; | |
| } | |
| if (bus->mlcap) | |
| snd_hdac_ext_bus_get_ml_capabilities(ebus); | |
| /* create device for soc dmic */ | |
| err = skl_dmic_device_register(skl); | |
| if (err < 0) | |
| goto out_dsp_free; | |
| /* register platform dai and controls */ | |
| err = skl_platform_register(bus->dev); | |
| if (err < 0) | |
| goto out_dmic_free; | |
| /* create codec instances */ | |
| err = skl_codec_create(ebus); | |
| if (err < 0) | |
| goto out_unregister; | |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { | |
| err = snd_hdac_display_power(bus, false); | |
| if (err < 0) { | |
| dev_err(bus->dev, "Cannot turn off display power on i915\n"); | |
| return err; | |
| } | |
| } | |
| /* | |
| * we are done probling so decrement link counts | |
| */ | |
| list_for_each_entry(hlink, &ebus->hlink_list, list) | |
| snd_hdac_ext_bus_link_put(ebus, hlink); | |
| /* configure PM */ | |
| pm_runtime_put_noidle(bus->dev); | |
| pm_runtime_allow(bus->dev); | |
| return 0; | |
| out_unregister: | |
| skl_platform_unregister(bus->dev); | |
| out_dmic_free: | |
| skl_dmic_device_unregister(skl); | |
| out_dsp_free: | |
| skl_free_dsp(skl); | |
| out_mach_free: | |
| skl_machine_device_unregister(skl); | |
| out_nhlt_free: | |
| skl_nhlt_free(skl->nhlt); | |
| out_display_power_off: | |
| if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) | |
| snd_hdac_display_power(bus, false); | |
| out_free: | |
| skl->init_failed = 1; | |
| skl_free(ebus); | |
| return err; | |
| } | |
| static void skl_shutdown(struct pci_dev *pci) | |
| { | |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); | |
| struct hdac_bus *bus = ebus_to_hbus(ebus); | |
| struct hdac_stream *s; | |
| struct hdac_ext_stream *stream; | |
| struct skl *skl; | |
| if (ebus == NULL) | |
| return; | |
| skl = ebus_to_skl(ebus); | |
| if (skl->init_failed) | |
| return; | |
| snd_hdac_ext_stop_streams(ebus); | |
| list_for_each_entry(s, &bus->stream_list, list) { | |
| stream = stream_to_hdac_ext_stream(s); | |
| snd_hdac_ext_stream_decouple(ebus, stream, false); | |
| } | |
| snd_hdac_bus_stop_chip(bus); | |
| } | |
| static void skl_remove(struct pci_dev *pci) | |
| { | |
| struct hdac_ext_bus *ebus = pci_get_drvdata(pci); | |
| struct skl *skl = ebus_to_skl(ebus); | |
| release_firmware(skl->tplg); | |
| pm_runtime_get_noresume(&pci->dev); | |
| /* codec removal, invoke bus_device_remove */ | |
| snd_hdac_ext_bus_device_remove(ebus); | |
| skl_platform_unregister(&pci->dev); | |
| skl_free_dsp(skl); | |
| skl_machine_device_unregister(skl); | |
| skl_dmic_device_unregister(skl); | |
| skl_nhlt_free(skl->nhlt); | |
| skl_free(ebus); | |
| dev_set_drvdata(&pci->dev, NULL); | |
| } | |
| static struct sst_acpi_mach sst_skl_devdata[] = { | |
| { "INT343A", "skl_alc286s_i2s", "intel/dsp_fw_release.bin", NULL, NULL, NULL }, | |
| { "INT343B", "skl_n88l25_s4567", "intel/dsp_fw_release.bin", | |
| NULL, NULL, &skl_dmic_data }, | |
| { "MX98357A", "skl_n88l25_m98357a", "intel/dsp_fw_release.bin", | |
| NULL, NULL, &skl_dmic_data }, | |
| {} | |
| }; | |
| static struct sst_acpi_mach sst_bxtp_devdata[] = { | |
| { "INT343A", "bxt_alc298s_i2s", "intel/dsp_fw_bxtn.bin", NULL, NULL, NULL }, | |
| { "DLGS7219", "bxt_da7219_max98357a_i2s", "intel/dsp_fw_bxtn.bin", NULL, NULL, NULL }, | |
| }; | |
| static struct sst_acpi_mach sst_kbl_devdata[] = { | |
| { "INT343A", "kbl_alc286s_i2s", "intel/dsp_fw_kbl.bin", NULL, NULL, NULL }, | |
| { "INT343B", "kbl_n88l25_s4567", "intel/dsp_fw_kbl.bin", NULL, NULL, &skl_dmic_data }, | |
| { "MX98357A", "kbl_n88l25_m98357a", "intel/dsp_fw_kbl.bin", NULL, NULL, &skl_dmic_data }, | |
| {} | |
| }; | |
| /* PCI IDs */ | |
| static const struct pci_device_id skl_ids[] = { | |
| /* Sunrise Point-LP */ | |
| { PCI_DEVICE(0x8086, 0x9d70), | |
| .driver_data = (unsigned long)&sst_skl_devdata}, | |
| /* BXT-P */ | |
| { PCI_DEVICE(0x8086, 0x5a98), | |
| .driver_data = (unsigned long)&sst_bxtp_devdata}, | |
| /* KBL */ | |
| { PCI_DEVICE(0x8086, 0x9D71), | |
| .driver_data = (unsigned long)&sst_kbl_devdata}, | |
| { 0, } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, skl_ids); | |
| /* pci_driver definition */ | |
| static struct pci_driver skl_driver = { | |
| .name = KBUILD_MODNAME, | |
| .id_table = skl_ids, | |
| .probe = skl_probe, | |
| .remove = skl_remove, | |
| .shutdown = skl_shutdown, | |
| .driver = { | |
| .pm = &skl_pm, | |
| }, | |
| }; | |
| module_pci_driver(skl_driver); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("Intel Skylake ASoC HDA driver"); |