| /* |
| * Copyright (c) 2010 Broadcom Corporation |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION |
| * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN |
| * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #ifndef _BRCM_MAIN_H_ |
| #define _BRCM_MAIN_H_ |
| |
| #include <linux/etherdevice.h> |
| |
| #include <brcmu_utils.h> |
| #include "types.h" |
| #include "d11.h" |
| #include "scb.h" |
| |
| #define INVCHANNEL 255 /* invalid channel */ |
| |
| /* max # brcms_c_module_register() calls */ |
| #define BRCMS_MAXMODULES 22 |
| |
| #define SEQNUM_SHIFT 4 |
| #define SEQNUM_MAX 0x1000 |
| |
| #define NTXRATE 64 /* # tx MPDUs rate is reported for */ |
| |
| /* Maximum wait time for a MAC suspend */ |
| /* uS: 83mS is max packet time (64KB ampdu @ 6Mbps) */ |
| #define BRCMS_MAX_MAC_SUSPEND 83000 |
| |
| /* responses for probe requests older that this are tossed, zero to disable */ |
| #define BRCMS_PRB_RESP_TIMEOUT 0 /* Disable probe response timeout */ |
| |
| /* transmit buffer max headroom for protocol headers */ |
| #define TXOFF (D11_TXH_LEN + D11_PHY_HDR_LEN) |
| |
| /* Macros for doing definition and get/set of bitfields |
| * Usage example, e.g. a three-bit field (bits 4-6): |
| * #define <NAME>_M BITFIELD_MASK(3) |
| * #define <NAME>_S 4 |
| * ... |
| * regval = R_REG(osh, ®s->regfoo); |
| * field = GFIELD(regval, <NAME>); |
| * regval = SFIELD(regval, <NAME>, 1); |
| * W_REG(osh, ®s->regfoo, regval); |
| */ |
| #define BITFIELD_MASK(width) \ |
| (((unsigned)1 << (width)) - 1) |
| #define GFIELD(val, field) \ |
| (((val) >> field ## _S) & field ## _M) |
| #define SFIELD(val, field, bits) \ |
| (((val) & (~(field ## _M << field ## _S))) | \ |
| ((unsigned)(bits) << field ## _S)) |
| |
| #define SW_TIMER_MAC_STAT_UPD 30 /* periodic MAC stats update */ |
| |
| /* max # supported core revisions (0 .. MAXCOREREV - 1) */ |
| #define MAXCOREREV 28 |
| |
| /* Double check that unsupported cores are not enabled */ |
| #if CONF_MSK(D11CONF, 0x4f) || CONF_GE(D11CONF, MAXCOREREV) |
| #error "Configuration for D11CONF includes unsupported versions." |
| #endif /* Bad versions */ |
| |
| /* values for shortslot_override */ |
| #define BRCMS_SHORTSLOT_AUTO -1 /* Driver will manage Shortslot setting */ |
| #define BRCMS_SHORTSLOT_OFF 0 /* Turn off short slot */ |
| #define BRCMS_SHORTSLOT_ON 1 /* Turn on short slot */ |
| |
| /* value for short/long and mixmode/greenfield preamble */ |
| #define BRCMS_LONG_PREAMBLE (0) |
| #define BRCMS_SHORT_PREAMBLE (1 << 0) |
| #define BRCMS_GF_PREAMBLE (1 << 1) |
| #define BRCMS_MM_PREAMBLE (1 << 2) |
| #define BRCMS_IS_MIMO_PREAMBLE(_pre) (((_pre) == BRCMS_GF_PREAMBLE) || \ |
| ((_pre) == BRCMS_MM_PREAMBLE)) |
| |
| /* TxFrameID */ |
| /* seq and frag bits: SEQNUM_SHIFT, FRAGNUM_MASK (802.11.h) */ |
| /* rate epoch bits: TXFID_RATE_SHIFT, TXFID_RATE_MASK ((wlc_rate.c) */ |
| #define TXFID_QUEUE_MASK 0x0007 /* Bits 0-2 */ |
| #define TXFID_SEQ_MASK 0x7FE0 /* Bits 5-15 */ |
| #define TXFID_SEQ_SHIFT 5 /* Number of bit shifts */ |
| #define TXFID_RATE_PROBE_MASK 0x8000 /* Bit 15 for rate probe */ |
| #define TXFID_RATE_MASK 0x0018 /* Mask for bits 3 and 4 */ |
| #define TXFID_RATE_SHIFT 3 /* Shift 3 bits for rate mask */ |
| |
| /* promote boardrev */ |
| #define BOARDREV_PROMOTABLE 0xFF /* from */ |
| #define BOARDREV_PROMOTED 1 /* to */ |
| |
| #define DATA_BLOCK_TX_SUPR (1 << 4) |
| |
| /* 802.1D Priority to TX FIFO number for wme */ |
| extern const u8 prio2fifo[]; |
| |
| /* Ucode MCTL_WAKE override bits */ |
| #define BRCMS_WAKE_OVERRIDE_CLKCTL 0x01 |
| #define BRCMS_WAKE_OVERRIDE_PHYREG 0x02 |
| #define BRCMS_WAKE_OVERRIDE_MACSUSPEND 0x04 |
| #define BRCMS_WAKE_OVERRIDE_TXFIFO 0x08 |
| #define BRCMS_WAKE_OVERRIDE_FORCEFAST 0x10 |
| |
| /* stuff pulled in from wlc.c */ |
| |
| /* Interrupt bit error summary. Don't include I_RU: we refill DMA at other |
| * times; and if we run out, constant I_RU interrupts may cause lockup. We |
| * will still get error counts from rx0ovfl. |
| */ |
| #define I_ERRORS (I_PC | I_PD | I_DE | I_RO | I_XU) |
| /* default software intmasks */ |
| #define DEF_RXINTMASK (I_RI) /* enable rx int on rxfifo only */ |
| #define DEF_MACINTMASK (MI_TXSTOP | MI_TBTT | MI_ATIMWINEND | MI_PMQ | \ |
| MI_PHYTXERR | MI_DMAINT | MI_TFS | MI_BG_NOISE | \ |
| MI_CCA | MI_TO | MI_GP0 | MI_RFDISABLE | MI_PWRUP) |
| |
| #define MAXTXPKTS 6 /* max # pkts pending */ |
| |
| /* frameburst */ |
| #define MAXTXFRAMEBURST 8 /* vanilla xpress mode: max frames/burst */ |
| #define MAXFRAMEBURST_TXOP 10000 /* Frameburst TXOP in usec */ |
| |
| #define NFIFO 6 /* # tx/rx fifopairs */ |
| |
| /* PLL requests */ |
| |
| /* pll is shared on old chips */ |
| #define BRCMS_PLLREQ_SHARED 0x1 |
| /* hold pll for radio monitor register checking */ |
| #define BRCMS_PLLREQ_RADIO_MON 0x2 |
| /* hold/release pll for some short operation */ |
| #define BRCMS_PLLREQ_FLIP 0x4 |
| |
| #define CHANNEL_BANDUNIT(wlc, ch) \ |
| (((ch) <= CH_MAX_2G_CHANNEL) ? BAND_2G_INDEX : BAND_5G_INDEX) |
| |
| #define OTHERBANDUNIT(wlc) \ |
| ((uint)((wlc)->band->bandunit ? BAND_2G_INDEX : BAND_5G_INDEX)) |
| |
| /* |
| * 802.11 protection information |
| * |
| * _g: use g spec protection, driver internal. |
| * g_override: override for use of g spec protection. |
| * gmode_user: user config gmode, operating band->gmode is different. |
| * overlap: Overlap BSS/IBSS protection for both 11g and 11n. |
| * nmode_user: user config nmode, operating pub->nmode is different. |
| * n_cfg: use OFDM protection on MIMO frames. |
| * n_cfg_override: override for use of N protection. |
| * nongf: non-GF present protection. |
| * nongf_override: override for use of GF protection. |
| * n_pam_override: override for preamble: MM or GF. |
| * n_obss: indicated OBSS Non-HT STA present. |
| */ |
| struct brcms_protection { |
| bool _g; |
| s8 g_override; |
| u8 gmode_user; |
| s8 overlap; |
| s8 nmode_user; |
| s8 n_cfg; |
| s8 n_cfg_override; |
| bool nongf; |
| s8 nongf_override; |
| s8 n_pam_override; |
| bool n_obss; |
| }; |
| |
| /* |
| * anything affecting the single/dual streams/antenna operation |
| * |
| * hw_txchain: HW txchain bitmap cfg. |
| * txchain: txchain bitmap being used. |
| * txstreams: number of txchains being used. |
| * hw_rxchain: HW rxchain bitmap cfg. |
| * rxchain: rxchain bitmap being used. |
| * rxstreams: number of rxchains being used. |
| * ant_rx_ovr: rx antenna override. |
| * txant: userTx antenna setting. |
| * phytxant: phyTx antenna setting in txheader. |
| * ss_opmode: singlestream Operational mode, 0:siso; 1:cdd. |
| * ss_algosel_auto: if true, use wlc->stf->ss_algo_channel; |
| * else use wlc->band->stf->ss_mode_band. |
| * ss_algo_channel: ss based on per-channel algo: 0: SISO, 1: CDD 2: STBC. |
| * rxchain_restore_delay: delay time to restore default rxchain. |
| * ldpc: AUTO/ON/OFF ldpc cap supported. |
| * txcore[MAX_STREAMS_SUPPORTED + 1]: bitmap of selected core for each Nsts. |
| * spatial_policy: |
| */ |
| struct brcms_stf { |
| u8 hw_txchain; |
| u8 txchain; |
| u8 txstreams; |
| u8 hw_rxchain; |
| u8 rxchain; |
| u8 rxstreams; |
| u8 ant_rx_ovr; |
| s8 txant; |
| u16 phytxant; |
| u8 ss_opmode; |
| bool ss_algosel_auto; |
| u16 ss_algo_channel; |
| u8 rxchain_restore_delay; |
| s8 ldpc; |
| u8 txcore[MAX_STREAMS_SUPPORTED + 1]; |
| s8 spatial_policy; |
| }; |
| |
| #define BRCMS_STF_SS_STBC_TX(wlc, scb) \ |
| (((wlc)->stf->txstreams > 1) && (((wlc)->band->band_stf_stbc_tx == ON) \ |
| || (((scb)->flags & SCB_STBCCAP) && \ |
| (wlc)->band->band_stf_stbc_tx == AUTO && \ |
| isset(&((wlc)->stf->ss_algo_channel), PHY_TXC1_MODE_STBC)))) |
| |
| #define BRCMS_STBC_CAP_PHY(wlc) (BRCMS_ISNPHY(wlc->band) && \ |
| NREV_GE(wlc->band->phyrev, 3)) |
| |
| #define BRCMS_SGI_CAP_PHY(wlc) ((BRCMS_ISNPHY(wlc->band) && \ |
| NREV_GE(wlc->band->phyrev, 3)) || \ |
| BRCMS_ISLCNPHY(wlc->band)) |
| |
| #define BRCMS_CHAN_PHYTYPE(x) (((x) & RXS_CHAN_PHYTYPE_MASK) \ |
| >> RXS_CHAN_PHYTYPE_SHIFT) |
| #define BRCMS_CHAN_CHANNEL(x) (((x) & RXS_CHAN_ID_MASK) \ |
| >> RXS_CHAN_ID_SHIFT) |
| |
| /* |
| * core state (mac) |
| */ |
| struct brcms_core { |
| uint coreidx; /* # sb enumerated core */ |
| |
| /* fifo */ |
| uint *txavail[NFIFO]; /* # tx descriptors available */ |
| s16 txpktpend[NFIFO]; /* tx admission control */ |
| |
| struct macstat *macstat_snapshot; /* mac hw prev read values */ |
| }; |
| |
| /* |
| * band state (phy+ana+radio) |
| */ |
| struct brcms_band { |
| int bandtype; /* BRCM_BAND_2G, BRCM_BAND_5G */ |
| uint bandunit; /* bandstate[] index */ |
| |
| u16 phytype; /* phytype */ |
| u16 phyrev; |
| u16 radioid; |
| u16 radiorev; |
| struct brcms_phy_pub *pi; /* pointer to phy specific information */ |
| bool abgphy_encore; |
| |
| u8 gmode; /* currently active gmode */ |
| |
| struct scb *hwrs_scb; /* permanent scb for hw rateset */ |
| |
| /* band-specific copy of default_bss.rateset */ |
| struct brcms_c_rateset defrateset; |
| |
| u8 band_stf_ss_mode; /* Configured STF type, 0:siso; 1:cdd */ |
| s8 band_stf_stbc_tx; /* STBC TX 0:off; 1:force on; -1:auto */ |
| /* rates supported by chip (phy-specific) */ |
| struct brcms_c_rateset hw_rateset; |
| u8 basic_rate[BRCM_MAXRATE + 1]; /* basic rates indexed by rate */ |
| bool mimo_cap_40; /* 40 MHz cap enabled on this band */ |
| s8 antgain; /* antenna gain from srom */ |
| |
| u16 CWmin; /* minimum size of contention window, in unit of aSlotTime */ |
| u16 CWmax; /* maximum size of contention window, in unit of aSlotTime */ |
| struct ieee80211_supported_band band; |
| }; |
| |
| /* module control blocks */ |
| struct modulecb { |
| /* module name : NULL indicates empty array member */ |
| char name[32]; |
| /* handle passed when handler 'doiovar' is called */ |
| struct brcms_info *hdl; |
| |
| int (*down_fn)(void *handle); /* down handler. Note: the int returned |
| * by the down function is a count of the |
| * number of timers that could not be |
| * freed. |
| */ |
| |
| }; |
| |
| struct brcms_hw_band { |
| int bandtype; /* BRCM_BAND_2G, BRCM_BAND_5G */ |
| uint bandunit; /* bandstate[] index */ |
| u16 mhfs[MHFMAX]; /* MHF array shadow */ |
| u8 bandhw_stf_ss_mode; /* HW configured STF type, 0:siso; 1:cdd */ |
| u16 CWmin; |
| u16 CWmax; |
| u32 core_flags; |
| |
| u16 phytype; /* phytype */ |
| u16 phyrev; |
| u16 radioid; |
| u16 radiorev; |
| struct brcms_phy_pub *pi; /* pointer to phy specific information */ |
| bool abgphy_encore; |
| }; |
| |
| struct brcms_hardware { |
| bool _piomode; /* true if pio mode */ |
| struct brcms_c_info *wlc; |
| |
| /* fifo */ |
| struct dma_pub *di[NFIFO]; /* dma handles, per fifo */ |
| |
| uint unit; /* device instance number */ |
| |
| /* version info */ |
| u16 vendorid; /* PCI vendor id */ |
| u16 deviceid; /* PCI device id */ |
| uint corerev; /* core revision */ |
| u8 sromrev; /* version # of the srom */ |
| u16 boardrev; /* version # of particular board */ |
| u32 boardflags; /* Board specific flags from srom */ |
| u32 boardflags2; /* More board flags if sromrev >= 4 */ |
| u32 machwcap; /* MAC capabilities */ |
| u32 machwcap_backup; /* backup of machwcap */ |
| |
| struct si_pub *sih; /* SI handle (cookie for siutils calls) */ |
| struct d11regs __iomem *regs; /* pointer to device registers */ |
| struct phy_shim_info *physhim; /* phy shim layer handler */ |
| struct shared_phy *phy_sh; /* pointer to shared phy state */ |
| struct brcms_hw_band *band;/* pointer to active per-band state */ |
| /* band state per phy/radio */ |
| struct brcms_hw_band *bandstate[MAXBANDS]; |
| u16 bmac_phytxant; /* cache of high phytxant state */ |
| bool shortslot; /* currently using 11g ShortSlot timing */ |
| u16 SRL; /* 802.11 dot11ShortRetryLimit */ |
| u16 LRL; /* 802.11 dot11LongRetryLimit */ |
| u16 SFBL; /* Short Frame Rate Fallback Limit */ |
| u16 LFBL; /* Long Frame Rate Fallback Limit */ |
| |
| bool up; /* d11 hardware up and running */ |
| uint now; /* # elapsed seconds */ |
| uint _nbands; /* # bands supported */ |
| u16 chanspec; /* bmac chanspec shadow */ |
| |
| uint *txavail[NFIFO]; /* # tx descriptors available */ |
| const u16 *xmtfifo_sz; /* fifo size in 256B for each xmt fifo */ |
| |
| u32 pllreq; /* pll requests to keep PLL on */ |
| |
| u8 suspended_fifos; /* Which TX fifo to remain awake for */ |
| u32 maccontrol; /* Cached value of maccontrol */ |
| uint mac_suspend_depth; /* current depth of mac_suspend levels */ |
| u32 wake_override; /* bit flags to force MAC to WAKE mode */ |
| u32 mute_override; /* Prevent ucode from sending beacons */ |
| u8 etheraddr[ETH_ALEN]; /* currently configured ethernet address */ |
| bool noreset; /* true= do not reset hw, used by WLC_OUT */ |
| bool forcefastclk; /* true if h/w is forcing to use fast clk */ |
| bool clk; /* core is out of reset and has clock */ |
| bool sbclk; /* sb has clock */ |
| bool phyclk; /* phy is out of reset and has clock */ |
| |
| bool ucode_loaded; /* true after ucode downloaded */ |
| |
| |
| u8 hw_stf_ss_opmode; /* STF single stream operation mode */ |
| u8 antsel_type; /* Type of boardlevel mimo antenna switch-logic |
| * 0 = N/A, 1 = 2x4 board, 2 = 2x3 CB2 board |
| */ |
| u32 antsel_avail; /* |
| * put struct antsel_info here if more info is |
| * needed |
| */ |
| }; |
| |
| /* TX Queue information |
| * |
| * Each flow of traffic out of the device has a TX Queue with independent |
| * flow control. Several interfaces may be associated with a single TX Queue |
| * if they belong to the same flow of traffic from the device. For multi-channel |
| * operation there are independent TX Queues for each channel. |
| */ |
| struct brcms_txq_info { |
| struct brcms_txq_info *next; |
| struct pktq q; |
| uint stopped; /* tx flow control bits */ |
| }; |
| |
| /* |
| * Principal common driver data structure. |
| * |
| * pub: pointer to driver public state. |
| * wl: pointer to specific private state. |
| * regs: pointer to device registers. |
| * hw: HW related state. |
| * clkreq_override: setting for clkreq for PCIE : Auto, 0, 1. |
| * fastpwrup_dly: time in us needed to bring up d11 fast clock. |
| * macintstatus: bit channel between isr and dpc. |
| * macintmask: sw runtime master macintmask value. |
| * defmacintmask: default "on" macintmask value. |
| * clk: core is out of reset and has clock. |
| * core: pointer to active io core. |
| * band: pointer to active per-band state. |
| * corestate: per-core state (one per hw core). |
| * bandstate: per-band state (one per phy/radio). |
| * qvalid: DirFrmQValid and BcMcFrmQValid. |
| * ampdu: ampdu module handler. |
| * asi: antsel module handler. |
| * cmi: channel manager module handler. |
| * vendorid: PCI vendor id. |
| * deviceid: PCI device id. |
| * ucode_rev: microcode revision. |
| * machwcap: MAC capabilities, BMAC shadow. |
| * perm_etheraddr: original sprom local ethernet address. |
| * bandlocked: disable auto multi-band switching. |
| * bandinit_pending: track band init in auto band. |
| * radio_monitor: radio timer is running. |
| * going_down: down path intermediate variable. |
| * wdtimer: timer for watchdog routine. |
| * radio_timer: timer for hw radio button monitor routine. |
| * monitor: monitor (MPDU sniffing) mode. |
| * bcnmisc_monitor: bcns promisc mode override for monitor. |
| * _rifs: enable per-packet rifs. |
| * bcn_li_bcn: beacon listen interval in # beacons. |
| * bcn_li_dtim: beacon listen interval in # dtims. |
| * WDarmed: watchdog timer is armed. |
| * WDlast: last time wlc_watchdog() was called. |
| * edcf_txop[IEEE80211_NUM_ACS]: current txop for each ac. |
| * wme_retries: per-AC retry limits. |
| * tx_prec_map: Precedence map based on HW FIFO space. |
| * fifo2prec_map[NFIFO]: pointer to fifo2_prec map based on WME. |
| * bsscfg: set of BSS configurations, idx 0 is default and always valid. |
| * cfg: the primary bsscfg (can be AP or STA). |
| * tx_queues: common TX Queue list. |
| * modulecb: |
| * mimoft: SIGN or 11N. |
| * cck_40txbw: 11N, cck tx b/w override when in 40MHZ mode. |
| * ofdm_40txbw: 11N, ofdm tx b/w override when in 40MHZ mode. |
| * mimo_40txbw: 11N, mimo tx b/w override when in 40MHZ mode. |
| * default_bss: configured BSS parameters. |
| * mc_fid_counter: BC/MC FIFO frame ID counter. |
| * country_default: saved country for leaving 802.11d auto-country mode. |
| * autocountry_default: initial country for 802.11d auto-country mode. |
| * prb_resp_timeout: do not send prb resp if request older |
| * than this, 0 = disable. |
| * home_chanspec: shared home chanspec. |
| * chanspec: target operational channel. |
| * usr_fragthresh: user configured fragmentation threshold. |
| * fragthresh[NFIFO]: per-fifo fragmentation thresholds. |
| * RTSThresh: 802.11 dot11RTSThreshold. |
| * SRL: 802.11 dot11ShortRetryLimit. |
| * LRL: 802.11 dot11LongRetryLimit. |
| * SFBL: Short Frame Rate Fallback Limit. |
| * LFBL: Long Frame Rate Fallback Limit. |
| * shortslot: currently using 11g ShortSlot timing. |
| * shortslot_override: 11g ShortSlot override. |
| * include_legacy_erp: include Legacy ERP info elt ID 47 as well as g ID 42. |
| * PLCPHdr_override: 802.11b Preamble Type override. |
| * stf: |
| * bcn_rspec: save bcn ratespec purpose. |
| * tempsense_lasttime; |
| * tx_duty_cycle_ofdm: maximum allowed duty cycle for OFDM. |
| * tx_duty_cycle_cck: maximum allowed duty cycle for CCK. |
| * pkt_queue: txq for transmit packets. |
| * wiphy: |
| * pri_scb: primary Station Control Block |
| */ |
| struct brcms_c_info { |
| struct brcms_pub *pub; |
| struct brcms_info *wl; |
| struct d11regs __iomem *regs; |
| struct brcms_hardware *hw; |
| |
| /* clock */ |
| u16 fastpwrup_dly; |
| |
| /* interrupt */ |
| u32 macintstatus; |
| u32 macintmask; |
| u32 defmacintmask; |
| |
| bool clk; |
| |
| /* multiband */ |
| struct brcms_core *core; |
| struct brcms_band *band; |
| struct brcms_core *corestate; |
| struct brcms_band *bandstate[MAXBANDS]; |
| |
| /* packet queue */ |
| uint qvalid; |
| |
| struct ampdu_info *ampdu; |
| struct antsel_info *asi; |
| struct brcms_cm_info *cmi; |
| |
| u16 vendorid; |
| u16 deviceid; |
| uint ucode_rev; |
| |
| u8 perm_etheraddr[ETH_ALEN]; |
| |
| bool bandlocked; |
| bool bandinit_pending; |
| |
| bool radio_monitor; |
| bool going_down; |
| |
| struct brcms_timer *wdtimer; |
| struct brcms_timer *radio_timer; |
| |
| /* promiscuous */ |
| uint filter_flags; |
| |
| /* driver feature */ |
| bool _rifs; |
| |
| /* AP-STA synchronization, power save */ |
| u8 bcn_li_bcn; |
| u8 bcn_li_dtim; |
| |
| bool WDarmed; |
| u32 WDlast; |
| |
| /* WME */ |
| u16 edcf_txop[IEEE80211_NUM_ACS]; |
| |
| u16 wme_retries[IEEE80211_NUM_ACS]; |
| u16 tx_prec_map; |
| u16 fifo2prec_map[NFIFO]; |
| |
| struct brcms_bss_cfg *bsscfg; |
| |
| /* tx queue */ |
| struct brcms_txq_info *tx_queues; |
| |
| struct modulecb *modulecb; |
| |
| u8 mimoft; |
| s8 cck_40txbw; |
| s8 ofdm_40txbw; |
| s8 mimo_40txbw; |
| |
| struct brcms_bss_info *default_bss; |
| |
| u16 mc_fid_counter; |
| |
| char country_default[BRCM_CNTRY_BUF_SZ]; |
| char autocountry_default[BRCM_CNTRY_BUF_SZ]; |
| u16 prb_resp_timeout; |
| |
| u16 home_chanspec; |
| |
| /* PHY parameters */ |
| u16 chanspec; |
| u16 usr_fragthresh; |
| u16 fragthresh[NFIFO]; |
| u16 RTSThresh; |
| u16 SRL; |
| u16 LRL; |
| u16 SFBL; |
| u16 LFBL; |
| |
| /* network config */ |
| bool shortslot; |
| s8 shortslot_override; |
| bool include_legacy_erp; |
| |
| struct brcms_protection *protection; |
| s8 PLCPHdr_override; |
| |
| struct brcms_stf *stf; |
| |
| u32 bcn_rspec; |
| |
| uint tempsense_lasttime; |
| |
| u16 tx_duty_cycle_ofdm; |
| u16 tx_duty_cycle_cck; |
| |
| struct brcms_txq_info *pkt_queue; |
| struct wiphy *wiphy; |
| struct scb pri_scb; |
| }; |
| |
| /* antsel module specific state */ |
| struct antsel_info { |
| struct brcms_c_info *wlc; /* pointer to main wlc structure */ |
| struct brcms_pub *pub; /* pointer to public fn */ |
| u8 antsel_type; /* Type of boardlevel mimo antenna switch-logic |
| * 0 = N/A, 1 = 2x4 board, 2 = 2x3 CB2 board |
| */ |
| u8 antsel_antswitch; /* board level antenna switch type */ |
| bool antsel_avail; /* Ant selection availability (SROM based) */ |
| struct brcms_antselcfg antcfg_11n; /* antenna configuration */ |
| struct brcms_antselcfg antcfg_cur; /* current antenna config (auto) */ |
| }; |
| |
| /* |
| * BSS configuration state |
| * |
| * wlc: wlc to which this bsscfg belongs to. |
| * up: is this configuration up operational |
| * enable: is this configuration enabled |
| * associated: is BSS in ASSOCIATED state |
| * BSS: infraustructure or adhoc |
| * SSID_len: the length of SSID |
| * SSID: SSID string |
| * |
| * |
| * BSSID: BSSID (associated) |
| * cur_etheraddr: h/w address |
| * flags: BSSCFG flags; see below |
| * |
| * current_bss: BSS parms in ASSOCIATED state |
| * |
| * |
| * ID: 'unique' ID of this bsscfg, assigned at bsscfg allocation |
| */ |
| struct brcms_bss_cfg { |
| struct brcms_c_info *wlc; |
| bool up; |
| bool enable; |
| bool associated; |
| bool BSS; |
| u8 SSID_len; |
| u8 SSID[IEEE80211_MAX_SSID_LEN]; |
| u8 BSSID[ETH_ALEN]; |
| u8 cur_etheraddr[ETH_ALEN]; |
| struct brcms_bss_info *current_bss; |
| }; |
| |
| extern void brcms_c_txfifo(struct brcms_c_info *wlc, uint fifo, |
| struct sk_buff *p, |
| bool commit, s8 txpktpend); |
| extern void brcms_c_txfifo_complete(struct brcms_c_info *wlc, uint fifo, |
| s8 txpktpend); |
| extern void brcms_c_txq_enq(struct brcms_c_info *wlc, struct scb *scb, |
| struct sk_buff *sdu, uint prec); |
| extern void brcms_c_print_txstatus(struct tx_status *txs); |
| extern int brcms_b_xmtfifo_sz_get(struct brcms_hardware *wlc_hw, uint fifo, |
| uint *blocks); |
| |
| #if defined(BCMDBG) |
| extern void brcms_c_print_txdesc(struct d11txh *txh); |
| #else |
| #define brcms_c_print_txdesc(a) |
| #endif |
| |
| extern int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config); |
| extern void brcms_c_mac_promisc(struct brcms_c_info *wlc, uint filter_flags); |
| extern void brcms_c_send_q(struct brcms_c_info *wlc); |
| extern int brcms_c_prep_pdu(struct brcms_c_info *wlc, struct sk_buff *pdu, |
| uint *fifo); |
| extern u16 brcms_c_calc_lsig_len(struct brcms_c_info *wlc, u32 ratespec, |
| uint mac_len); |
| extern u32 brcms_c_rspec_to_rts_rspec(struct brcms_c_info *wlc, |
| u32 rspec, |
| bool use_rspec, u16 mimo_ctlchbw); |
| extern u16 brcms_c_compute_rtscts_dur(struct brcms_c_info *wlc, bool cts_only, |
| u32 rts_rate, |
| u32 frame_rate, |
| u8 rts_preamble_type, |
| u8 frame_preamble_type, uint frame_len, |
| bool ba); |
| extern void brcms_c_inval_dma_pkts(struct brcms_hardware *hw, |
| struct ieee80211_sta *sta, |
| void (*dma_callback_fn)); |
| extern void brcms_c_update_beacon(struct brcms_c_info *wlc); |
| extern void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend); |
| extern int brcms_c_set_nmode(struct brcms_c_info *wlc); |
| extern void brcms_c_beacon_phytxctl_txant_upd(struct brcms_c_info *wlc, |
| u32 bcn_rate); |
| extern void brcms_b_antsel_type_set(struct brcms_hardware *wlc_hw, |
| u8 antsel_type); |
| extern void brcms_b_set_chanspec(struct brcms_hardware *wlc_hw, |
| u16 chanspec, |
| bool mute, struct txpwr_limits *txpwr); |
| extern void brcms_b_write_shm(struct brcms_hardware *wlc_hw, uint offset, |
| u16 v); |
| extern u16 brcms_b_read_shm(struct brcms_hardware *wlc_hw, uint offset); |
| extern void brcms_b_mhf(struct brcms_hardware *wlc_hw, u8 idx, u16 mask, |
| u16 val, int bands); |
| extern void brcms_b_corereset(struct brcms_hardware *wlc_hw, u32 flags); |
| extern void brcms_b_mctrl(struct brcms_hardware *wlc_hw, u32 mask, u32 val); |
| extern void brcms_b_phy_reset(struct brcms_hardware *wlc_hw); |
| extern void brcms_b_bw_set(struct brcms_hardware *wlc_hw, u16 bw); |
| extern void brcms_b_core_phypll_reset(struct brcms_hardware *wlc_hw); |
| extern void brcms_c_ucode_wake_override_set(struct brcms_hardware *wlc_hw, |
| u32 override_bit); |
| extern void brcms_c_ucode_wake_override_clear(struct brcms_hardware *wlc_hw, |
| u32 override_bit); |
| extern void brcms_b_write_template_ram(struct brcms_hardware *wlc_hw, |
| int offset, int len, void *buf); |
| extern u16 brcms_b_rate_shm_offset(struct brcms_hardware *wlc_hw, u8 rate); |
| extern void brcms_b_copyto_objmem(struct brcms_hardware *wlc_hw, |
| uint offset, const void *buf, int len, |
| u32 sel); |
| extern void brcms_b_copyfrom_objmem(struct brcms_hardware *wlc_hw, uint offset, |
| void *buf, int len, u32 sel); |
| extern void brcms_b_switch_macfreq(struct brcms_hardware *wlc_hw, u8 spurmode); |
| extern u16 brcms_b_get_txant(struct brcms_hardware *wlc_hw); |
| extern void brcms_b_phyclk_fgc(struct brcms_hardware *wlc_hw, bool clk); |
| extern void brcms_b_macphyclk_set(struct brcms_hardware *wlc_hw, bool clk); |
| extern void brcms_b_core_phypll_ctl(struct brcms_hardware *wlc_hw, bool on); |
| extern void brcms_b_txant_set(struct brcms_hardware *wlc_hw, u16 phytxant); |
| extern void brcms_b_band_stf_ss_set(struct brcms_hardware *wlc_hw, |
| u8 stf_mode); |
| extern void brcms_c_init_scb(struct scb *scb); |
| |
| #endif /* _BRCM_MAIN_H_ */ |