| /* |
| Copyright (C) 2004 - 2007 rt2x00 SourceForge Project |
| <http://rt2x00.serialmonkey.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the |
| Free Software Foundation, Inc., |
| 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* |
| Module: rt2500usb |
| Abstract: rt2500usb device specific routines. |
| Supported chipsets: RT2570. |
| */ |
| |
| /* |
| * Set enviroment defines for rt2x00.h |
| */ |
| #define DRV_NAME "rt2500usb" |
| |
| #include <linux/delay.h> |
| #include <linux/etherdevice.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| |
| #include "rt2x00.h" |
| #include "rt2x00usb.h" |
| #include "rt2500usb.h" |
| |
| /* |
| * Register access. |
| * All access to the CSR registers will go through the methods |
| * rt2500usb_register_read and rt2500usb_register_write. |
| * BBP and RF register require indirect register access, |
| * and use the CSR registers BBPCSR and RFCSR to achieve this. |
| * These indirect registers work with busy bits, |
| * and we will try maximal REGISTER_BUSY_COUNT times to access |
| * the register while taking a REGISTER_BUSY_DELAY us delay |
| * between each attampt. When the busy bit is still set at that time, |
| * the access attempt is considered to have failed, |
| * and we will print an error. |
| */ |
| static inline void rt2500usb_register_read(const struct rt2x00_dev *rt2x00dev, |
| const unsigned int offset, |
| u16 *value) |
| { |
| __le16 reg; |
| rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, |
| USB_VENDOR_REQUEST_IN, offset, |
| ®, sizeof(u16), REGISTER_TIMEOUT); |
| *value = le16_to_cpu(reg); |
| } |
| |
| static inline void rt2500usb_register_multiread(const struct rt2x00_dev |
| *rt2x00dev, |
| const unsigned int offset, |
| void *value, const u16 length) |
| { |
| int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); |
| rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, |
| USB_VENDOR_REQUEST_IN, offset, |
| value, length, timeout); |
| } |
| |
| static inline void rt2500usb_register_write(const struct rt2x00_dev *rt2x00dev, |
| const unsigned int offset, |
| u16 value) |
| { |
| __le16 reg = cpu_to_le16(value); |
| rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, |
| USB_VENDOR_REQUEST_OUT, offset, |
| ®, sizeof(u16), REGISTER_TIMEOUT); |
| } |
| |
| static inline void rt2500usb_register_multiwrite(const struct rt2x00_dev |
| *rt2x00dev, |
| const unsigned int offset, |
| void *value, const u16 length) |
| { |
| int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); |
| rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, |
| USB_VENDOR_REQUEST_OUT, offset, |
| value, length, timeout); |
| } |
| |
| static u16 rt2500usb_bbp_check(const struct rt2x00_dev *rt2x00dev) |
| { |
| u16 reg; |
| unsigned int i; |
| |
| for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| rt2500usb_register_read(rt2x00dev, PHY_CSR8, ®); |
| if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY)) |
| break; |
| udelay(REGISTER_BUSY_DELAY); |
| } |
| |
| return reg; |
| } |
| |
| static void rt2500usb_bbp_write(const struct rt2x00_dev *rt2x00dev, |
| const unsigned int word, const u8 value) |
| { |
| u16 reg; |
| |
| /* |
| * Wait until the BBP becomes ready. |
| */ |
| reg = rt2500usb_bbp_check(rt2x00dev); |
| if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { |
| ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); |
| return; |
| } |
| |
| /* |
| * Write the data into the BBP. |
| */ |
| reg = 0; |
| rt2x00_set_field16(®, PHY_CSR7_DATA, value); |
| rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); |
| rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0); |
| |
| rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg); |
| } |
| |
| static void rt2500usb_bbp_read(const struct rt2x00_dev *rt2x00dev, |
| const unsigned int word, u8 *value) |
| { |
| u16 reg; |
| |
| /* |
| * Wait until the BBP becomes ready. |
| */ |
| reg = rt2500usb_bbp_check(rt2x00dev); |
| if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { |
| ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); |
| return; |
| } |
| |
| /* |
| * Write the request into the BBP. |
| */ |
| reg = 0; |
| rt2x00_set_field16(®, PHY_CSR7_REG_ID, word); |
| rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1); |
| |
| rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg); |
| |
| /* |
| * Wait until the BBP becomes ready. |
| */ |
| reg = rt2500usb_bbp_check(rt2x00dev); |
| if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { |
| ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); |
| *value = 0xff; |
| return; |
| } |
| |
| rt2500usb_register_read(rt2x00dev, PHY_CSR7, ®); |
| *value = rt2x00_get_field16(reg, PHY_CSR7_DATA); |
| } |
| |
| static void rt2500usb_rf_write(const struct rt2x00_dev *rt2x00dev, |
| const unsigned int word, const u32 value) |
| { |
| u16 reg; |
| unsigned int i; |
| |
| if (!word) |
| return; |
| |
| for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| rt2500usb_register_read(rt2x00dev, PHY_CSR10, ®); |
| if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY)) |
| goto rf_write; |
| udelay(REGISTER_BUSY_DELAY); |
| } |
| |
| ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n"); |
| return; |
| |
| rf_write: |
| reg = 0; |
| rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value); |
| rt2500usb_register_write(rt2x00dev, PHY_CSR9, reg); |
| |
| reg = 0; |
| rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16); |
| rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20); |
| rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0); |
| rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1); |
| |
| rt2500usb_register_write(rt2x00dev, PHY_CSR10, reg); |
| rt2x00_rf_write(rt2x00dev, word, value); |
| } |
| |
| #ifdef CONFIG_RT2X00_LIB_DEBUGFS |
| #define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) ) |
| |
| static void rt2500usb_read_csr(const struct rt2x00_dev *rt2x00dev, |
| const unsigned int word, u32 *data) |
| { |
| rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data); |
| } |
| |
| static void rt2500usb_write_csr(const struct rt2x00_dev *rt2x00dev, |
| const unsigned int word, u32 data) |
| { |
| rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data); |
| } |
| |
| static const struct rt2x00debug rt2500usb_rt2x00debug = { |
| .owner = THIS_MODULE, |
| .csr = { |
| .read = rt2500usb_read_csr, |
| .write = rt2500usb_write_csr, |
| .word_size = sizeof(u16), |
| .word_count = CSR_REG_SIZE / sizeof(u16), |
| }, |
| .eeprom = { |
| .read = rt2x00_eeprom_read, |
| .write = rt2x00_eeprom_write, |
| .word_size = sizeof(u16), |
| .word_count = EEPROM_SIZE / sizeof(u16), |
| }, |
| .bbp = { |
| .read = rt2500usb_bbp_read, |
| .write = rt2500usb_bbp_write, |
| .word_size = sizeof(u8), |
| .word_count = BBP_SIZE / sizeof(u8), |
| }, |
| .rf = { |
| .read = rt2x00_rf_read, |
| .write = rt2500usb_rf_write, |
| .word_size = sizeof(u32), |
| .word_count = RF_SIZE / sizeof(u32), |
| }, |
| }; |
| #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ |
| |
| /* |
| * Configuration handlers. |
| */ |
| static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr) |
| { |
| __le16 reg[3]; |
| |
| memset(®, 0, sizeof(reg)); |
| memcpy(®, addr, ETH_ALEN); |
| |
| /* |
| * The MAC address is passed to us as an array of bytes, |
| * that array is little endian, so no need for byte ordering. |
| */ |
| rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, ®, sizeof(reg)); |
| } |
| |
| static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) |
| { |
| __le16 reg[3]; |
| |
| memset(®, 0, sizeof(reg)); |
| memcpy(®, bssid, ETH_ALEN); |
| |
| /* |
| * The BSSID is passed to us as an array of bytes, |
| * that array is little endian, so no need for byte ordering. |
| */ |
| rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, ®, sizeof(reg)); |
| } |
| |
| static void rt2500usb_config_packet_filter(struct rt2x00_dev *rt2x00dev, |
| const unsigned int filter) |
| { |
| int promisc = !!(filter & IFF_PROMISC); |
| int multicast = !!(filter & IFF_MULTICAST); |
| int broadcast = !!(filter & IFF_BROADCAST); |
| u16 reg; |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, !promisc); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, !multicast); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, !broadcast); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); |
| } |
| |
| static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type) |
| { |
| u16 reg; |
| |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); |
| |
| /* |
| * Apply hardware packet filter. |
| */ |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); |
| |
| if (!is_monitor_present(&rt2x00dev->interface) && |
| (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA)) |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, 1); |
| else |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, 0); |
| |
| /* |
| * If there is a non-monitor interface present |
| * the packet should be strict (even if a monitor interface is present!). |
| * When there is only 1 interface present which is in monitor mode |
| * we should start accepting _all_ frames. |
| */ |
| if (is_interface_present(&rt2x00dev->interface)) { |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, 1); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, 1); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, 1); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1); |
| } else if (is_monitor_present(&rt2x00dev->interface)) { |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, 0); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, 0); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, 0); |
| rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 0); |
| } |
| |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); |
| |
| /* |
| * Enable beacon config |
| */ |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®); |
| rt2x00_set_field16(®, TXRX_CSR20_OFFSET, |
| (PREAMBLE + get_duration(IEEE80211_HEADER, 2)) >> 6); |
| if (type == IEEE80211_IF_TYPE_STA) |
| rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 0); |
| else |
| rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 2); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg); |
| |
| /* |
| * Enable synchronisation. |
| */ |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); |
| rt2x00_set_field16(®, TXRX_CSR18_OFFSET, 0); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); |
| if (is_interface_present(&rt2x00dev->interface)) { |
| rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); |
| rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); |
| } |
| |
| rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); |
| if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP) |
| rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 2); |
| else if (type == IEEE80211_IF_TYPE_STA) |
| rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 1); |
| else if (is_monitor_present(&rt2x00dev->interface) && |
| !is_interface_present(&rt2x00dev->interface)) |
| rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 0); |
| |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); |
| } |
| |
| static void rt2500usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate) |
| { |
| struct ieee80211_conf *conf = &rt2x00dev->hw->conf; |
| u16 reg; |
| u16 value; |
| u16 preamble; |
| |
| if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE)) |
| preamble = SHORT_PREAMBLE; |
| else |
| preamble = PREAMBLE; |
| |
| reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK; |
| |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR11, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); |
| value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ? |
| SHORT_DIFS : DIFS) + |
| PLCP + preamble + get_duration(ACK_SIZE, 10); |
| rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, value); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®); |
| if (preamble == SHORT_PREAMBLE) |
| rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, 1); |
| else |
| rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, 0); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg); |
| } |
| |
| static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev, |
| const int phymode) |
| { |
| struct ieee80211_hw_mode *mode; |
| struct ieee80211_rate *rate; |
| |
| if (phymode == MODE_IEEE80211A) |
| rt2x00dev->curr_hwmode = HWMODE_A; |
| else if (phymode == MODE_IEEE80211B) |
| rt2x00dev->curr_hwmode = HWMODE_B; |
| else |
| rt2x00dev->curr_hwmode = HWMODE_G; |
| |
| mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode]; |
| rate = &mode->rates[mode->num_rates - 1]; |
| |
| rt2500usb_config_rate(rt2x00dev, rate->val2); |
| |
| if (phymode == MODE_IEEE80211B) { |
| rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040); |
| } else { |
| rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c); |
| } |
| } |
| |
| static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, |
| const int index, const int channel, |
| const int txpower) |
| { |
| struct rf_channel reg; |
| |
| /* |
| * Fill rf_reg structure. |
| */ |
| memcpy(®, &rt2x00dev->spec.channels[index], sizeof(reg)); |
| |
| /* |
| * Set TXpower. |
| */ |
| rt2x00_set_field32(®.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); |
| |
| /* |
| * For RT2525E we should first set the channel to half band higher. |
| */ |
| if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { |
| static const u32 vals[] = { |
| 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2, |
| 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba, |
| 0x000008ba, 0x000008be, 0x000008b7, 0x00000902, |
| 0x00000902, 0x00000906 |
| }; |
| |
| rt2500usb_rf_write(rt2x00dev, 2, vals[channel - 1]); |
| if (reg.rf4) |
| rt2500usb_rf_write(rt2x00dev, 4, reg.rf4); |
| } |
| |
| rt2500usb_rf_write(rt2x00dev, 1, reg.rf1); |
| rt2500usb_rf_write(rt2x00dev, 2, reg.rf2); |
| rt2500usb_rf_write(rt2x00dev, 3, reg.rf3); |
| if (reg.rf4) |
| rt2500usb_rf_write(rt2x00dev, 4, reg.rf4); |
| } |
| |
| static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev, |
| const int txpower) |
| { |
| u32 rf3; |
| |
| rt2x00_rf_read(rt2x00dev, 3, &rf3); |
| rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower)); |
| rt2500usb_rf_write(rt2x00dev, 3, rf3); |
| } |
| |
| static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev, |
| const int antenna_tx, const int antenna_rx) |
| { |
| u8 r2; |
| u8 r14; |
| u16 csr5; |
| u16 csr6; |
| |
| rt2500usb_bbp_read(rt2x00dev, 2, &r2); |
| rt2500usb_bbp_read(rt2x00dev, 14, &r14); |
| rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5); |
| rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6); |
| |
| /* |
| * Configure the TX antenna. |
| */ |
| switch (antenna_tx) { |
| case ANTENNA_SW_DIVERSITY: |
| case ANTENNA_HW_DIVERSITY: |
| rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1); |
| rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1); |
| rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1); |
| break; |
| case ANTENNA_A: |
| rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0); |
| rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0); |
| rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0); |
| break; |
| case ANTENNA_B: |
| rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2); |
| rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2); |
| rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2); |
| break; |
| } |
| |
| /* |
| * Configure the RX antenna. |
| */ |
| switch (antenna_rx) { |
| case ANTENNA_SW_DIVERSITY: |
| case ANTENNA_HW_DIVERSITY: |
| rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1); |
| break; |
| case ANTENNA_A: |
| rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0); |
| break; |
| case ANTENNA_B: |
| rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2); |
| break; |
| } |
| |
| /* |
| * RT2525E and RT5222 need to flip TX I/Q |
| */ |
| if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || |
| rt2x00_rf(&rt2x00dev->chip, RF5222)) { |
| rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); |
| rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1); |
| rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1); |
| |
| /* |
| * RT2525E does not need RX I/Q Flip. |
| */ |
| if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) |
| rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); |
| } else { |
| rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0); |
| rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0); |
| } |
| |
| rt2500usb_bbp_write(rt2x00dev, 2, r2); |
| rt2500usb_bbp_write(rt2x00dev, 14, r14); |
| rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5); |
| rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6); |
| } |
| |
| static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev, |
| const int short_slot_time, |
| const int beacon_int) |
| { |
| u16 reg; |
| |
| rt2500usb_register_write(rt2x00dev, MAC_CSR10, |
| short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); |
| rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, beacon_int * 4); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg); |
| } |
| |
| static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, |
| const unsigned int flags, |
| struct ieee80211_conf *conf) |
| { |
| int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; |
| |
| if (flags & CONFIG_UPDATE_PHYMODE) |
| rt2500usb_config_phymode(rt2x00dev, conf->phymode); |
| if (flags & CONFIG_UPDATE_CHANNEL) |
| rt2500usb_config_channel(rt2x00dev, conf->channel_val, |
| conf->channel, conf->power_level); |
| if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL)) |
| rt2500usb_config_txpower(rt2x00dev, conf->power_level); |
| if (flags & CONFIG_UPDATE_ANTENNA) |
| rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel_tx, |
| conf->antenna_sel_rx); |
| if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT)) |
| rt2500usb_config_duration(rt2x00dev, short_slot_time, |
| conf->beacon_int); |
| } |
| |
| /* |
| * LED functions. |
| */ |
| static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev) |
| { |
| u16 reg; |
| |
| rt2500usb_register_read(rt2x00dev, MAC_CSR21, ®); |
| rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, 70); |
| rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, 30); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg); |
| |
| rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®); |
| |
| if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) { |
| rt2x00_set_field16(®, MAC_CSR20_LINK, 1); |
| rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0); |
| } else if (rt2x00dev->led_mode == LED_MODE_ASUS) { |
| rt2x00_set_field16(®, MAC_CSR20_LINK, 0); |
| rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1); |
| } else { |
| rt2x00_set_field16(®, MAC_CSR20_LINK, 1); |
| rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1); |
| } |
| |
| rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg); |
| } |
| |
| static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev) |
| { |
| u16 reg; |
| |
| rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®); |
| rt2x00_set_field16(®, MAC_CSR20_LINK, 0); |
| rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg); |
| } |
| |
| /* |
| * Link tuning |
| */ |
| static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev) |
| { |
| u16 reg; |
| |
| /* |
| * Update FCS error count from register. |
| */ |
| rt2500usb_register_read(rt2x00dev, STA_CSR0, ®); |
| rt2x00dev->link.rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR); |
| |
| /* |
| * Update False CCA count from register. |
| */ |
| rt2500usb_register_read(rt2x00dev, STA_CSR3, ®); |
| rt2x00dev->link.false_cca = |
| rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR); |
| } |
| |
| static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev) |
| { |
| u16 eeprom; |
| u16 value; |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom); |
| value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW); |
| rt2500usb_bbp_write(rt2x00dev, 24, value); |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom); |
| value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW); |
| rt2500usb_bbp_write(rt2x00dev, 25, value); |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom); |
| value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW); |
| rt2500usb_bbp_write(rt2x00dev, 61, value); |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom); |
| value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER); |
| rt2500usb_bbp_write(rt2x00dev, 17, value); |
| |
| rt2x00dev->link.vgc_level = value; |
| } |
| |
| static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) |
| { |
| int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); |
| u16 bbp_thresh; |
| u16 vgc_bound; |
| u16 sens; |
| u16 r24; |
| u16 r25; |
| u16 r61; |
| u16 r17_sens; |
| u8 r17; |
| u8 up_bound; |
| u8 low_bound; |
| |
| /* |
| * Determine the BBP tuning threshold and correctly |
| * set BBP 24, 25 and 61. |
| */ |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh); |
| bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD); |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24); |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25); |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61); |
| |
| if ((rssi + bbp_thresh) > 0) { |
| r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH); |
| r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH); |
| r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH); |
| } else { |
| r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW); |
| r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW); |
| r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW); |
| } |
| |
| rt2500usb_bbp_write(rt2x00dev, 24, r24); |
| rt2500usb_bbp_write(rt2x00dev, 25, r25); |
| rt2500usb_bbp_write(rt2x00dev, 61, r61); |
| |
| /* |
| * Read current r17 value, as well as the sensitivity values |
| * for the r17 register. |
| */ |
| rt2500usb_bbp_read(rt2x00dev, 17, &r17); |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); |
| |
| /* |
| * A too low RSSI will cause too much false CCA which will |
| * then corrupt the R17 tuning. To remidy this the tuning should |
| * be stopped (While making sure the R17 value will not exceed limits) |
| */ |
| if (rssi >= -40) { |
| if (r17 != 0x60) |
| rt2500usb_bbp_write(rt2x00dev, 17, 0x60); |
| return; |
| } |
| |
| /* |
| * Special big-R17 for short distance |
| */ |
| if (rssi >= -58) { |
| sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW); |
| if (r17 != sens) |
| rt2500usb_bbp_write(rt2x00dev, 17, sens); |
| return; |
| } |
| |
| /* |
| * Special mid-R17 for middle distance |
| */ |
| if (rssi >= -74) { |
| sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH); |
| if (r17 != sens) |
| rt2500usb_bbp_write(rt2x00dev, 17, sens); |
| return; |
| } |
| |
| /* |
| * Leave short or middle distance condition, restore r17 |
| * to the dynamic tuning range. |
| */ |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); |
| vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); |
| |
| low_bound = 0x32; |
| if (rssi >= -77) |
| up_bound = vgc_bound; |
| else |
| up_bound = vgc_bound - (-77 - rssi); |
| |
| if (up_bound < low_bound) |
| up_bound = low_bound; |
| |
| if (r17 > up_bound) { |
| rt2500usb_bbp_write(rt2x00dev, 17, up_bound); |
| rt2x00dev->link.vgc_level = up_bound; |
| } else if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) { |
| rt2500usb_bbp_write(rt2x00dev, 17, ++r17); |
| rt2x00dev->link.vgc_level = r17; |
| } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) { |
| rt2500usb_bbp_write(rt2x00dev, 17, --r17); |
| rt2x00dev->link.vgc_level = r17; |
| } |
| } |
| |
| /* |
| * Initialization functions. |
| */ |
| static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) |
| { |
| u16 reg; |
| |
| rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001, |
| USB_MODE_TEST, REGISTER_TIMEOUT); |
| rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308, |
| 0x00f0, REGISTER_TIMEOUT); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); |
| rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, 1); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); |
| |
| rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11); |
| |
| rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); |
| rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 1); |
| rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 1); |
| rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); |
| |
| rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); |
| rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0); |
| rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0); |
| rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR5, ®); |
| rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0, 13); |
| rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0_VALID, 1); |
| rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1, 12); |
| rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1_VALID, 1); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR6, ®); |
| rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0, 10); |
| rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0_VALID, 1); |
| rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1, 11); |
| rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1_VALID, 1); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR7, ®); |
| rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0, 7); |
| rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0_VALID, 1); |
| rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1, 6); |
| rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1_VALID, 1); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR8, ®); |
| rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0, 5); |
| rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0_VALID, 1); |
| rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1, 0); |
| rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1_VALID, 0); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg); |
| |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d); |
| |
| if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) |
| return -EBUSY; |
| |
| rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®); |
| rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0); |
| rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0); |
| rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 1); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); |
| |
| if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) { |
| rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®); |
| reg &= ~0x0002; |
| } else { |
| reg = 0x3002; |
| } |
| rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg); |
| |
| rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000); |
| |
| rt2500usb_register_read(rt2x00dev, MAC_CSR8, ®); |
| rt2x00_set_field16(®, MAC_CSR8_MAX_FRAME_UNIT, |
| rt2x00dev->rx->data_size); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®); |
| rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER); |
| rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, 0xff); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg); |
| |
| rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); |
| rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, 90); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); |
| |
| rt2500usb_register_read(rt2x00dev, PHY_CSR4, ®); |
| rt2x00_set_field16(®, PHY_CSR4_LOW_RF_LE, 1); |
| rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg); |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®); |
| rt2x00_set_field16(®, TXRX_CSR1_AUTO_SEQUENCE, 1); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg); |
| |
| return 0; |
| } |
| |
| static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev) |
| { |
| unsigned int i; |
| u16 eeprom; |
| u8 value; |
| u8 reg_id; |
| |
| for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| rt2500usb_bbp_read(rt2x00dev, 0, &value); |
| if ((value != 0xff) && (value != 0x00)) |
| goto continue_csr_init; |
| NOTICE(rt2x00dev, "Waiting for BBP register.\n"); |
| udelay(REGISTER_BUSY_DELAY); |
| } |
| |
| ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); |
| return -EACCES; |
| |
| continue_csr_init: |
| rt2500usb_bbp_write(rt2x00dev, 3, 0x02); |
| rt2500usb_bbp_write(rt2x00dev, 4, 0x19); |
| rt2500usb_bbp_write(rt2x00dev, 14, 0x1c); |
| rt2500usb_bbp_write(rt2x00dev, 15, 0x30); |
| rt2500usb_bbp_write(rt2x00dev, 16, 0xac); |
| rt2500usb_bbp_write(rt2x00dev, 18, 0x18); |
| rt2500usb_bbp_write(rt2x00dev, 19, 0xff); |
| rt2500usb_bbp_write(rt2x00dev, 20, 0x1e); |
| rt2500usb_bbp_write(rt2x00dev, 21, 0x08); |
| rt2500usb_bbp_write(rt2x00dev, 22, 0x08); |
| rt2500usb_bbp_write(rt2x00dev, 23, 0x08); |
| rt2500usb_bbp_write(rt2x00dev, 24, 0x80); |
| rt2500usb_bbp_write(rt2x00dev, 25, 0x50); |
| rt2500usb_bbp_write(rt2x00dev, 26, 0x08); |
| rt2500usb_bbp_write(rt2x00dev, 27, 0x23); |
| rt2500usb_bbp_write(rt2x00dev, 30, 0x10); |
| rt2500usb_bbp_write(rt2x00dev, 31, 0x2b); |
| rt2500usb_bbp_write(rt2x00dev, 32, 0xb9); |
| rt2500usb_bbp_write(rt2x00dev, 34, 0x12); |
| rt2500usb_bbp_write(rt2x00dev, 35, 0x50); |
| rt2500usb_bbp_write(rt2x00dev, 39, 0xc4); |
| rt2500usb_bbp_write(rt2x00dev, 40, 0x02); |
| rt2500usb_bbp_write(rt2x00dev, 41, 0x60); |
| rt2500usb_bbp_write(rt2x00dev, 53, 0x10); |
| rt2500usb_bbp_write(rt2x00dev, 54, 0x18); |
| rt2500usb_bbp_write(rt2x00dev, 56, 0x08); |
| rt2500usb_bbp_write(rt2x00dev, 57, 0x10); |
| rt2500usb_bbp_write(rt2x00dev, 58, 0x08); |
| rt2500usb_bbp_write(rt2x00dev, 61, 0x60); |
| rt2500usb_bbp_write(rt2x00dev, 62, 0x10); |
| rt2500usb_bbp_write(rt2x00dev, 75, 0xff); |
| |
| DEBUG(rt2x00dev, "Start initialization from EEPROM...\n"); |
| for (i = 0; i < EEPROM_BBP_SIZE; i++) { |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); |
| |
| if (eeprom != 0xffff && eeprom != 0x0000) { |
| reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID); |
| value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE); |
| DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n", |
| reg_id, value); |
| rt2500usb_bbp_write(rt2x00dev, reg_id, value); |
| } |
| } |
| DEBUG(rt2x00dev, "...End initialization from EEPROM.\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * Device state switch handlers. |
| */ |
| static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev, |
| enum dev_state state) |
| { |
| u16 reg; |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); |
| rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, |
| state == STATE_RADIO_RX_OFF); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); |
| } |
| |
| static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev) |
| { |
| /* |
| * Initialize all registers. |
| */ |
| if (rt2500usb_init_registers(rt2x00dev) || |
| rt2500usb_init_bbp(rt2x00dev)) { |
| ERROR(rt2x00dev, "Register initialization failed.\n"); |
| return -EIO; |
| } |
| |
| rt2x00usb_enable_radio(rt2x00dev); |
| |
| /* |
| * Enable LED |
| */ |
| rt2500usb_enable_led(rt2x00dev); |
| |
| return 0; |
| } |
| |
| static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev) |
| { |
| /* |
| * Disable LED |
| */ |
| rt2500usb_disable_led(rt2x00dev); |
| |
| rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121); |
| |
| /* |
| * Disable synchronisation. |
| */ |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); |
| |
| rt2x00usb_disable_radio(rt2x00dev); |
| } |
| |
| static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev, |
| enum dev_state state) |
| { |
| u16 reg; |
| u16 reg2; |
| unsigned int i; |
| char put_to_sleep; |
| char bbp_state; |
| char rf_state; |
| |
| put_to_sleep = (state != STATE_AWAKE); |
| |
| reg = 0; |
| rt2x00_set_field16(®, MAC_CSR17_BBP_DESIRE_STATE, state); |
| rt2x00_set_field16(®, MAC_CSR17_RF_DESIRE_STATE, state); |
| rt2x00_set_field16(®, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); |
| rt2x00_set_field16(®, MAC_CSR17_SET_STATE, 1); |
| rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); |
| |
| /* |
| * Device is not guaranteed to be in the requested state yet. |
| * We must wait until the register indicates that the |
| * device has entered the correct state. |
| */ |
| for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| rt2500usb_register_read(rt2x00dev, MAC_CSR17, ®2); |
| bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE); |
| rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE); |
| if (bbp_state == state && rf_state == state) |
| return 0; |
| rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg); |
| msleep(30); |
| } |
| |
| NOTICE(rt2x00dev, "Device failed to enter state %d, " |
| "current device state: bbp %d and rf %d.\n", |
| state, bbp_state, rf_state); |
| |
| return -EBUSY; |
| } |
| |
| static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, |
| enum dev_state state) |
| { |
| int retval = 0; |
| |
| switch (state) { |
| case STATE_RADIO_ON: |
| retval = rt2500usb_enable_radio(rt2x00dev); |
| break; |
| case STATE_RADIO_OFF: |
| rt2500usb_disable_radio(rt2x00dev); |
| break; |
| case STATE_RADIO_RX_ON: |
| case STATE_RADIO_RX_OFF: |
| rt2500usb_toggle_rx(rt2x00dev, state); |
| break; |
| case STATE_DEEP_SLEEP: |
| case STATE_SLEEP: |
| case STATE_STANDBY: |
| case STATE_AWAKE: |
| retval = rt2500usb_set_state(rt2x00dev, state); |
| break; |
| default: |
| retval = -ENOTSUPP; |
| break; |
| } |
| |
| return retval; |
| } |
| |
| /* |
| * TX descriptor initialization |
| */ |
| static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, |
| struct data_desc *txd, |
| struct data_entry_desc *desc, |
| struct ieee80211_hdr *ieee80211hdr, |
| unsigned int length, |
| struct ieee80211_tx_control *control) |
| { |
| u32 word; |
| |
| /* |
| * Start writing the descriptor words. |
| */ |
| rt2x00_desc_read(txd, 1, &word); |
| rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); |
| rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs); |
| rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min); |
| rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max); |
| rt2x00_desc_write(txd, 1, word); |
| |
| rt2x00_desc_read(txd, 2, &word); |
| rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal); |
| rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service); |
| rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low); |
| rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high); |
| rt2x00_desc_write(txd, 2, word); |
| |
| rt2x00_desc_read(txd, 0, &word); |
| rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit); |
| rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, |
| test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags)); |
| rt2x00_set_field32(&word, TXD_W0_ACK, |
| !(control->flags & IEEE80211_TXCTL_NO_ACK)); |
| rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, |
| test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags)); |
| rt2x00_set_field32(&word, TXD_W0_OFDM, |
| test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags)); |
| rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, |
| !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT)); |
| rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs); |
| rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length); |
| rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE); |
| rt2x00_desc_write(txd, 0, word); |
| } |
| |
| /* |
| * TX data initialization |
| */ |
| static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, |
| unsigned int queue) |
| { |
| u16 reg; |
| |
| if (queue != IEEE80211_TX_QUEUE_BEACON) |
| return; |
| |
| rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); |
| if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) { |
| rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); |
| /* |
| * Beacon generation will fail initially. |
| * To prevent this we need to register the TXRX_CSR19 |
| * register several times. |
| */ |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0); |
| rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); |
| } |
| } |
| |
| /* |
| * RX control handlers |
| */ |
| static int rt2500usb_fill_rxdone(struct data_entry *entry, |
| int *signal, int *rssi, int *ofdm, int *size) |
| { |
| struct urb *urb = entry->priv; |
| struct data_desc *rxd = (struct data_desc *)(entry->skb->data + |
| (urb->actual_length - |
| entry->ring->desc_size)); |
| u32 word0; |
| u32 word1; |
| |
| rt2x00_desc_read(rxd, 0, &word0); |
| rt2x00_desc_read(rxd, 1, &word1); |
| |
| if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) || |
| rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) || |
| rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR)) |
| return -EINVAL; |
| |
| /* |
| * Obtain the status about this packet. |
| */ |
| *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL); |
| *rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) - |
| entry->ring->rt2x00dev->rssi_offset; |
| *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM); |
| *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); |
| |
| return 0; |
| } |
| |
| /* |
| * Interrupt functions. |
| */ |
| static void rt2500usb_beacondone(struct urb *urb) |
| { |
| struct data_entry *entry = (struct data_entry *)urb->context; |
| struct data_ring *ring = entry->ring; |
| |
| if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) |
| return; |
| |
| /* |
| * Check if this was the guardian beacon, |
| * if that was the case we need to send the real beacon now. |
| * Otherwise we should free the sk_buffer, the device |
| * should be doing the rest of the work now. |
| */ |
| if (ring->index == 1) { |
| rt2x00_ring_index_done_inc(ring); |
| entry = rt2x00_get_data_entry(ring); |
| usb_submit_urb(entry->priv, GFP_ATOMIC); |
| rt2x00_ring_index_inc(ring); |
| } else if (ring->index_done == 1) { |
| entry = rt2x00_get_data_entry_done(ring); |
| if (entry->skb) { |
| dev_kfree_skb(entry->skb); |
| entry->skb = NULL; |
| } |
| rt2x00_ring_index_done_inc(ring); |
| } |
| } |
| |
| /* |
| * Device probe functions. |
| */ |
| static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) |
| { |
| u16 word; |
| u8 *mac; |
| |
| rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); |
| |
| /* |
| * Start validation of the data that has been read. |
| */ |
| mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); |
| if (!is_valid_ether_addr(mac)) { |
| random_ether_addr(mac); |
| EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac)); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2); |
| rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0); |
| rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0); |
| rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0); |
| rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0); |
| rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0); |
| rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word); |
| EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0); |
| rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0); |
| rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word); |
| EEPROM(rt2x00dev, "NIC: 0x%04x\n", word); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI, |
| DEFAULT_RSSI_OFFSET); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word); |
| EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word); |
| EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); |
| EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48); |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word); |
| EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40); |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word); |
| EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40); |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word); |
| EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word); |
| } |
| |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word); |
| if (word == 0xffff) { |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60); |
| rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d); |
| rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word); |
| EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word); |
| } |
| |
| return 0; |
| } |
| |
| static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) |
| { |
| u16 reg; |
| u16 value; |
| u16 eeprom; |
| |
| /* |
| * Read EEPROM word for configuration. |
| */ |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); |
| |
| /* |
| * Identify RF chipset. |
| */ |
| value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); |
| rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); |
| rt2x00_set_chip(rt2x00dev, RT2570, value, reg); |
| |
| if (rt2x00_rev(&rt2x00dev->chip, 0xffff0)) { |
| ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); |
| return -ENODEV; |
| } |
| |
| if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && |
| !rt2x00_rf(&rt2x00dev->chip, RF2523) && |
| !rt2x00_rf(&rt2x00dev->chip, RF2524) && |
| !rt2x00_rf(&rt2x00dev->chip, RF2525) && |
| !rt2x00_rf(&rt2x00dev->chip, RF2525E) && |
| !rt2x00_rf(&rt2x00dev->chip, RF5222)) { |
| ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); |
| return -ENODEV; |
| } |
| |
| /* |
| * Identify default antenna configuration. |
| */ |
| rt2x00dev->hw->conf.antenna_sel_tx = |
| rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT); |
| rt2x00dev->hw->conf.antenna_sel_rx = |
| rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT); |
| |
| /* |
| * Store led mode, for correct led behaviour. |
| */ |
| rt2x00dev->led_mode = |
| rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); |
| |
| /* |
| * Check if the BBP tuning should be disabled. |
| */ |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom); |
| if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE)) |
| __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); |
| |
| /* |
| * Read the RSSI <-> dBm offset information. |
| */ |
| rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom); |
| rt2x00dev->rssi_offset = |
| rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI); |
| |
| return 0; |
| } |
| |
| /* |
| * RF value list for RF2522 |
| * Supports: 2.4 GHz |
| */ |
| static const struct rf_channel rf_vals_bg_2522[] = { |
| { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 }, |
| { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 }, |
| { 3, 0x00002050, 0x000c2002, 0x00000101, 0 }, |
| { 4, 0x00002050, 0x000c2016, 0x00000101, 0 }, |
| { 5, 0x00002050, 0x000c202a, 0x00000101, 0 }, |
| { 6, 0x00002050, 0x000c203e, 0x00000101, 0 }, |
| { 7, 0x00002050, 0x000c2052, 0x00000101, 0 }, |
| { 8, 0x00002050, 0x000c2066, 0x00000101, 0 }, |
| { 9, 0x00002050, 0x000c207a, 0x00000101, 0 }, |
| { 10, 0x00002050, 0x000c208e, 0x00000101, 0 }, |
| { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 }, |
| { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 }, |
| { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 }, |
| { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 }, |
| }; |
| |
| /* |
| * RF value list for RF2523 |
| * Supports: 2.4 GHz |
| */ |
| static const struct rf_channel rf_vals_bg_2523[] = { |
| { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b }, |
| { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b }, |
| { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b }, |
| { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b }, |
| { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b }, |
| { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b }, |
| { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b }, |
| { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b }, |
| { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b }, |
| { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b }, |
| { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b }, |
| { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b }, |
| { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b }, |
| { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 }, |
| }; |
| |
| /* |
| * RF value list for RF2524 |
| * Supports: 2.4 GHz |
| */ |
| static const struct rf_channel rf_vals_bg_2524[] = { |
| { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b }, |
| { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b }, |
| { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b }, |
| { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b }, |
| { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b }, |
| { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b }, |
| { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b }, |
| { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b }, |
| { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b }, |
| { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b }, |
| { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b }, |
| { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b }, |
| { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b }, |
| { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 }, |
| }; |
| |
| /* |
| * RF value list for RF2525 |
| * Supports: 2.4 GHz |
| */ |
| static const struct rf_channel rf_vals_bg_2525[] = { |
| { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b }, |
| { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b }, |
| { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b }, |
| { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b }, |
| { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b }, |
| { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b }, |
| { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b }, |
| { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b }, |
| { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b }, |
| { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b }, |
| { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b }, |
| { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b }, |
| { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b }, |
| { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 }, |
| }; |
| |
| /* |
| * RF value list for RF2525e |
| * Supports: 2.4 GHz |
| */ |
| static const struct rf_channel rf_vals_bg_2525e[] = { |
| { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b }, |
| { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 }, |
| { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b }, |
| { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 }, |
| { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b }, |
| { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 }, |
| { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b }, |
| { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 }, |
| { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b }, |
| { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 }, |
| { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b }, |
| { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 }, |
| { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b }, |
| { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 }, |
| }; |
| |
| /* |
| * RF value list for RF5222 |
| * Supports: 2.4 GHz & 5.2 GHz |
| */ |
| static const struct rf_channel rf_vals_5222[] = { |
| { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b }, |
| { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b }, |
| { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b }, |
| { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b }, |
| { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b }, |
| { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b }, |
| { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b }, |
| { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b }, |
| { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b }, |
| { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b }, |
| { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b }, |
| { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b }, |
| { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b }, |
| { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b }, |
| |
| /* 802.11 UNI / HyperLan 2 */ |
| { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f }, |
| { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f }, |
| { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f }, |
| { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f }, |
| { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f }, |
| { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f }, |
| { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f }, |
| { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f }, |
| |
| /* 802.11 HyperLan 2 */ |
| { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f }, |
| { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f }, |
| { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f }, |
| { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f }, |
| { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f }, |
| { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f }, |
| { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f }, |
| { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f }, |
| { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f }, |
| { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f }, |
| |
| /* 802.11 UNII */ |
| { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f }, |
| { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 }, |
| { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 }, |
| { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 }, |
| { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 }, |
| }; |
| |
| static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) |
| { |
| struct hw_mode_spec *spec = &rt2x00dev->spec; |
| u8 *txpower; |
| unsigned int i; |
| |
| /* |
| * Initialize all hw fields. |
| */ |
| rt2x00dev->hw->flags = |
| IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | |
| IEEE80211_HW_RX_INCLUDES_FCS | |
| IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | |
| IEEE80211_HW_MONITOR_DURING_OPER | |
| IEEE80211_HW_NO_PROBE_FILTERING; |
| rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; |
| rt2x00dev->hw->max_signal = MAX_SIGNAL; |
| rt2x00dev->hw->max_rssi = MAX_RX_SSI; |
| rt2x00dev->hw->queues = 2; |
| |
| SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); |
| SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, |
| rt2x00_eeprom_addr(rt2x00dev, |
| EEPROM_MAC_ADDR_0)); |
| |
| /* |
| * Convert tx_power array in eeprom. |
| */ |
| txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START); |
| for (i = 0; i < 14; i++) |
| txpower[i] = TXPOWER_FROM_DEV(txpower[i]); |
| |
| /* |
| * Initialize hw_mode information. |
| */ |
| spec->num_modes = 2; |
| spec->num_rates = 12; |
| spec->tx_power_a = NULL; |
| spec->tx_power_bg = txpower; |
| spec->tx_power_default = DEFAULT_TXPOWER; |
| |
| if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { |
| spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); |
| spec->channels = rf_vals_bg_2522; |
| } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) { |
| spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); |
| spec->channels = rf_vals_bg_2523; |
| } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) { |
| spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); |
| spec->channels = rf_vals_bg_2524; |
| } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { |
| spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); |
| spec->channels = rf_vals_bg_2525; |
| } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { |
| spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); |
| spec->channels = rf_vals_bg_2525e; |
| } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { |
| spec->num_channels = ARRAY_SIZE(rf_vals_5222); |
| spec->channels = rf_vals_5222; |
| spec->num_modes = 3; |
| } |
| } |
| |
| static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) |
| { |
| int retval; |
| |
| /* |
| * Allocate eeprom data. |
| */ |
| retval = rt2500usb_validate_eeprom(rt2x00dev); |
| if (retval) |
| return retval; |
| |
| retval = rt2500usb_init_eeprom(rt2x00dev); |
| if (retval) |
| return retval; |
| |
| /* |
| * Initialize hw specifications. |
| */ |
| rt2500usb_probe_hw_mode(rt2x00dev); |
| |
| /* |
| * USB devices require scheduled packet filter toggling |
| *This device requires the beacon ring |
| */ |
| __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags); |
| __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags); |
| |
| /* |
| * Set the rssi offset. |
| */ |
| rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; |
| |
| return 0; |
| } |
| |
| /* |
| * IEEE80211 stack callback functions. |
| */ |
| static int rt2500usb_beacon_update(struct ieee80211_hw *hw, |
| struct sk_buff *skb, |
| struct ieee80211_tx_control *control) |
| { |
| struct rt2x00_dev *rt2x00dev = hw->priv; |
| struct usb_device *usb_dev = |
| interface_to_usbdev(rt2x00dev_usb(rt2x00dev)); |
| struct data_ring *ring = |
| rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); |
| struct data_entry *beacon; |
| struct data_entry *guardian; |
| int length; |
| |
| /* |
| * Just in case the ieee80211 doesn't set this, |
| * but we need this queue set for the descriptor |
| * initialization. |
| */ |
| control->queue = IEEE80211_TX_QUEUE_BEACON; |
| |
| /* |
| * Obtain 2 entries, one for the guardian byte, |
| * the second for the actual beacon. |
| */ |
| guardian = rt2x00_get_data_entry(ring); |
| rt2x00_ring_index_inc(ring); |
| beacon = rt2x00_get_data_entry(ring); |
| |
| /* |
| * First we create the beacon. |
| */ |
| skb_push(skb, ring->desc_size); |
| rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data, |
| (struct ieee80211_hdr *)(skb->data + |
| ring->desc_size), |
| skb->len - ring->desc_size, control); |
| |
| /* |
| * Length passed to usb_fill_urb cannot be an odd number, |
| * so add 1 byte to make it even. |
| */ |
| length = skb->len; |
| if (length % 2) |
| length++; |
| |
| usb_fill_bulk_urb(beacon->priv, usb_dev, |
| usb_sndbulkpipe(usb_dev, 1), |
| skb->data, length, rt2500usb_beacondone, beacon); |
| |
| beacon->skb = skb; |
| |
| /* |
| * Second we need to create the guardian byte. |
| * We only need a single byte, so lets recycle |
| * the 'flags' field we are not using for beacons. |
| */ |
| guardian->flags = 0; |
| usb_fill_bulk_urb(guardian->priv, usb_dev, |
| usb_sndbulkpipe(usb_dev, 1), |
| &guardian->flags, 1, rt2500usb_beacondone, guardian); |
| |
| /* |
| * Send out the guardian byte. |
| */ |
| usb_submit_urb(guardian->priv, GFP_ATOMIC); |
| |
| /* |
| * Enable beacon generation. |
| */ |
| rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); |
| |
| return 0; |
| } |
| |
| static const struct ieee80211_ops rt2500usb_mac80211_ops = { |
| .tx = rt2x00mac_tx, |
| .add_interface = rt2x00mac_add_interface, |
| .remove_interface = rt2x00mac_remove_interface, |
| .config = rt2x00mac_config, |
| .config_interface = rt2x00mac_config_interface, |
| .set_multicast_list = rt2x00mac_set_multicast_list, |
| .get_stats = rt2x00mac_get_stats, |
| .conf_tx = rt2x00mac_conf_tx, |
| .get_tx_stats = rt2x00mac_get_tx_stats, |
| .beacon_update = rt2500usb_beacon_update, |
| }; |
| |
| static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { |
| .probe_hw = rt2500usb_probe_hw, |
| .initialize = rt2x00usb_initialize, |
| .uninitialize = rt2x00usb_uninitialize, |
| .set_device_state = rt2500usb_set_device_state, |
| .link_stats = rt2500usb_link_stats, |
| .reset_tuner = rt2500usb_reset_tuner, |
| .link_tuner = rt2500usb_link_tuner, |
| .write_tx_desc = rt2500usb_write_tx_desc, |
| .write_tx_data = rt2x00usb_write_tx_data, |
| .kick_tx_queue = rt2500usb_kick_tx_queue, |
| .fill_rxdone = rt2500usb_fill_rxdone, |
| .config_mac_addr = rt2500usb_config_mac_addr, |
| .config_bssid = rt2500usb_config_bssid, |
| .config_packet_filter = rt2500usb_config_packet_filter, |
| .config_type = rt2500usb_config_type, |
| .config = rt2500usb_config, |
| }; |
| |
| static const struct rt2x00_ops rt2500usb_ops = { |
| .name = DRV_NAME, |
| .rxd_size = RXD_DESC_SIZE, |
| .txd_size = TXD_DESC_SIZE, |
| .eeprom_size = EEPROM_SIZE, |
| .rf_size = RF_SIZE, |
| .lib = &rt2500usb_rt2x00_ops, |
| .hw = &rt2500usb_mac80211_ops, |
| #ifdef CONFIG_RT2X00_LIB_DEBUGFS |
| .debugfs = &rt2500usb_rt2x00debug, |
| #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ |
| }; |
| |
| /* |
| * rt2500usb module information. |
| */ |
| static struct usb_device_id rt2500usb_device_table[] = { |
| /* ASUS */ |
| { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Belkin */ |
| { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Cisco Systems */ |
| { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Conceptronic */ |
| { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* D-LINK */ |
| { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Gigabyte */ |
| { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Hercules */ |
| { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Melco */ |
| { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| |
| /* MSI */ |
| { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Ralink */ |
| { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Siemens */ |
| { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* SMC */ |
| { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Spairon */ |
| { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Trust */ |
| { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| /* Zinwell */ |
| { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) }, |
| { 0, } |
| }; |
| |
| MODULE_AUTHOR(DRV_PROJECT); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver."); |
| MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards"); |
| MODULE_DEVICE_TABLE(usb, rt2500usb_device_table); |
| MODULE_LICENSE("GPL"); |
| |
| static struct usb_driver rt2500usb_driver = { |
| .name = DRV_NAME, |
| .id_table = rt2500usb_device_table, |
| .probe = rt2x00usb_probe, |
| .disconnect = rt2x00usb_disconnect, |
| .suspend = rt2x00usb_suspend, |
| .resume = rt2x00usb_resume, |
| }; |
| |
| static int __init rt2500usb_init(void) |
| { |
| return usb_register(&rt2500usb_driver); |
| } |
| |
| static void __exit rt2500usb_exit(void) |
| { |
| usb_deregister(&rt2500usb_driver); |
| } |
| |
| module_init(rt2500usb_init); |
| module_exit(rt2500usb_exit); |