| /* |
| * x86 single-step support code, common to 32-bit and 64-bit. |
| */ |
| #include <linux/sched.h> |
| #include <linux/sched/task_stack.h> |
| #include <linux/mm.h> |
| #include <linux/ptrace.h> |
| #include <asm/desc.h> |
| #include <asm/mmu_context.h> |
| |
| unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs) |
| { |
| unsigned long addr, seg; |
| |
| addr = regs->ip; |
| seg = regs->cs & 0xffff; |
| if (v8086_mode(regs)) { |
| addr = (addr & 0xffff) + (seg << 4); |
| return addr; |
| } |
| |
| #ifdef CONFIG_MODIFY_LDT_SYSCALL |
| /* |
| * We'll assume that the code segments in the GDT |
| * are all zero-based. That is largely true: the |
| * TLS segments are used for data, and the PNPBIOS |
| * and APM bios ones we just ignore here. |
| */ |
| if ((seg & SEGMENT_TI_MASK) == SEGMENT_LDT) { |
| struct desc_struct *desc; |
| unsigned long base; |
| |
| seg >>= 3; |
| |
| mutex_lock(&child->mm->context.lock); |
| if (unlikely(!child->mm->context.ldt || |
| seg >= child->mm->context.ldt->size)) |
| addr = -1L; /* bogus selector, access would fault */ |
| else { |
| desc = &child->mm->context.ldt->entries[seg]; |
| base = get_desc_base(desc); |
| |
| /* 16-bit code segment? */ |
| if (!desc->d) |
| addr &= 0xffff; |
| addr += base; |
| } |
| mutex_unlock(&child->mm->context.lock); |
| } |
| #endif |
| |
| return addr; |
| } |
| |
| static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs) |
| { |
| int i, copied; |
| unsigned char opcode[15]; |
| unsigned long addr = convert_ip_to_linear(child, regs); |
| |
| copied = access_process_vm(child, addr, opcode, sizeof(opcode), |
| FOLL_FORCE); |
| for (i = 0; i < copied; i++) { |
| switch (opcode[i]) { |
| /* popf and iret */ |
| case 0x9d: case 0xcf: |
| return 1; |
| |
| /* CHECKME: 64 65 */ |
| |
| /* opcode and address size prefixes */ |
| case 0x66: case 0x67: |
| continue; |
| /* irrelevant prefixes (segment overrides and repeats) */ |
| case 0x26: case 0x2e: |
| case 0x36: case 0x3e: |
| case 0x64: case 0x65: |
| case 0xf0: case 0xf2: case 0xf3: |
| continue; |
| |
| #ifdef CONFIG_X86_64 |
| case 0x40 ... 0x4f: |
| if (!user_64bit_mode(regs)) |
| /* 32-bit mode: register increment */ |
| return 0; |
| /* 64-bit mode: REX prefix */ |
| continue; |
| #endif |
| |
| /* CHECKME: f2, f3 */ |
| |
| /* |
| * pushf: NOTE! We should probably not let |
| * the user see the TF bit being set. But |
| * it's more pain than it's worth to avoid |
| * it, and a debugger could emulate this |
| * all in user space if it _really_ cares. |
| */ |
| case 0x9c: |
| default: |
| return 0; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * Enable single-stepping. Return nonzero if user mode is not using TF itself. |
| */ |
| static int enable_single_step(struct task_struct *child) |
| { |
| struct pt_regs *regs = task_pt_regs(child); |
| unsigned long oflags; |
| |
| /* |
| * If we stepped into a sysenter/syscall insn, it trapped in |
| * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP. |
| * If user-mode had set TF itself, then it's still clear from |
| * do_debug() and we need to set it again to restore the user |
| * state so we don't wrongly set TIF_FORCED_TF below. |
| * If enable_single_step() was used last and that is what |
| * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are |
| * already set and our bookkeeping is fine. |
| */ |
| if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP))) |
| regs->flags |= X86_EFLAGS_TF; |
| |
| /* |
| * Always set TIF_SINGLESTEP - this guarantees that |
| * we single-step system calls etc.. This will also |
| * cause us to set TF when returning to user mode. |
| */ |
| set_tsk_thread_flag(child, TIF_SINGLESTEP); |
| |
| oflags = regs->flags; |
| |
| /* Set TF on the kernel stack.. */ |
| regs->flags |= X86_EFLAGS_TF; |
| |
| /* |
| * ..but if TF is changed by the instruction we will trace, |
| * don't mark it as being "us" that set it, so that we |
| * won't clear it by hand later. |
| * |
| * Note that if we don't actually execute the popf because |
| * of a signal arriving right now or suchlike, we will lose |
| * track of the fact that it really was "us" that set it. |
| */ |
| if (is_setting_trap_flag(child, regs)) { |
| clear_tsk_thread_flag(child, TIF_FORCED_TF); |
| return 0; |
| } |
| |
| /* |
| * If TF was already set, check whether it was us who set it. |
| * If not, we should never attempt a block step. |
| */ |
| if (oflags & X86_EFLAGS_TF) |
| return test_tsk_thread_flag(child, TIF_FORCED_TF); |
| |
| set_tsk_thread_flag(child, TIF_FORCED_TF); |
| |
| return 1; |
| } |
| |
| void set_task_blockstep(struct task_struct *task, bool on) |
| { |
| unsigned long debugctl; |
| |
| /* |
| * Ensure irq/preemption can't change debugctl in between. |
| * Note also that both TIF_BLOCKSTEP and debugctl should |
| * be changed atomically wrt preemption. |
| * |
| * NOTE: this means that set/clear TIF_BLOCKSTEP is only safe if |
| * task is current or it can't be running, otherwise we can race |
| * with __switch_to_xtra(). We rely on ptrace_freeze_traced() but |
| * PTRACE_KILL is not safe. |
| */ |
| local_irq_disable(); |
| debugctl = get_debugctlmsr(); |
| if (on) { |
| debugctl |= DEBUGCTLMSR_BTF; |
| set_tsk_thread_flag(task, TIF_BLOCKSTEP); |
| } else { |
| debugctl &= ~DEBUGCTLMSR_BTF; |
| clear_tsk_thread_flag(task, TIF_BLOCKSTEP); |
| } |
| if (task == current) |
| update_debugctlmsr(debugctl); |
| local_irq_enable(); |
| } |
| |
| /* |
| * Enable single or block step. |
| */ |
| static void enable_step(struct task_struct *child, bool block) |
| { |
| /* |
| * Make sure block stepping (BTF) is not enabled unless it should be. |
| * Note that we don't try to worry about any is_setting_trap_flag() |
| * instructions after the first when using block stepping. |
| * So no one should try to use debugger block stepping in a program |
| * that uses user-mode single stepping itself. |
| */ |
| if (enable_single_step(child) && block) |
| set_task_blockstep(child, true); |
| else if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) |
| set_task_blockstep(child, false); |
| } |
| |
| void user_enable_single_step(struct task_struct *child) |
| { |
| enable_step(child, 0); |
| } |
| |
| void user_enable_block_step(struct task_struct *child) |
| { |
| enable_step(child, 1); |
| } |
| |
| void user_disable_single_step(struct task_struct *child) |
| { |
| /* |
| * Make sure block stepping (BTF) is disabled. |
| */ |
| if (test_tsk_thread_flag(child, TIF_BLOCKSTEP)) |
| set_task_blockstep(child, false); |
| |
| /* Always clear TIF_SINGLESTEP... */ |
| clear_tsk_thread_flag(child, TIF_SINGLESTEP); |
| |
| /* But touch TF only if it was set by us.. */ |
| if (test_and_clear_tsk_thread_flag(child, TIF_FORCED_TF)) |
| task_pt_regs(child)->flags &= ~X86_EFLAGS_TF; |
| } |