| /* |
| * FM Driver for Connectivity chip of Texas Instruments. |
| * This file provides interfaces to V4L2 subsystem. |
| * |
| * This module registers with V4L2 subsystem as Radio |
| * data system interface (/dev/radio). During the registration, |
| * it will expose two set of function pointers. |
| * |
| * 1) File operation related API (open, close, read, write, poll...etc). |
| * 2) Set of V4L2 IOCTL complaint API. |
| * |
| * Copyright (C) 2011 Texas Instruments |
| * Author: Raja Mani <raja_mani@ti.com> |
| * Author: Manjunatha Halli <manjunatha_halli@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include "fmdrv.h" |
| #include "fmdrv_v4l2.h" |
| #include "fmdrv_common.h" |
| #include "fmdrv_rx.h" |
| #include "fmdrv_tx.h" |
| |
| static struct video_device *gradio_dev; |
| static u8 radio_disconnected; |
| |
| /* -- V4L2 RADIO (/dev/radioX) device file operation interfaces --- */ |
| |
| /* Read RX RDS data */ |
| static ssize_t fm_v4l2_fops_read(struct file *file, char __user * buf, |
| size_t count, loff_t *ppos) |
| { |
| u8 rds_mode; |
| int ret; |
| struct fmdev *fmdev; |
| |
| fmdev = video_drvdata(file); |
| |
| if (!radio_disconnected) { |
| fmerr("FM device is already disconnected\n"); |
| return -EIO; |
| } |
| |
| /* Turn on RDS mode , if it is disabled */ |
| ret = fm_rx_get_rds_mode(fmdev, &rds_mode); |
| if (ret < 0) { |
| fmerr("Unable to read current rds mode\n"); |
| return ret; |
| } |
| |
| if (rds_mode == FM_RDS_DISABLE) { |
| ret = fmc_set_rds_mode(fmdev, FM_RDS_ENABLE); |
| if (ret < 0) { |
| fmerr("Failed to enable rds mode\n"); |
| return ret; |
| } |
| } |
| |
| /* Copy RDS data from internal buffer to user buffer */ |
| return fmc_transfer_rds_from_internal_buff(fmdev, file, buf, count); |
| } |
| |
| /* Write TX RDS data */ |
| static ssize_t fm_v4l2_fops_write(struct file *file, const char __user * buf, |
| size_t count, loff_t *ppos) |
| { |
| struct tx_rds rds; |
| int ret; |
| struct fmdev *fmdev; |
| |
| ret = copy_from_user(&rds, buf, sizeof(rds)); |
| fmdbg("(%d)type: %d, text %s, af %d\n", |
| ret, rds.text_type, rds.text, rds.af_freq); |
| |
| fmdev = video_drvdata(file); |
| fm_tx_set_radio_text(fmdev, rds.text, rds.text_type); |
| fm_tx_set_af(fmdev, rds.af_freq); |
| |
| return 0; |
| } |
| |
| static u32 fm_v4l2_fops_poll(struct file *file, struct poll_table_struct *pts) |
| { |
| int ret; |
| struct fmdev *fmdev; |
| |
| fmdev = video_drvdata(file); |
| ret = fmc_is_rds_data_available(fmdev, file, pts); |
| if (ret < 0) |
| return POLLIN | POLLRDNORM; |
| |
| return 0; |
| } |
| |
| /* |
| * Handle open request for "/dev/radioX" device. |
| * Start with FM RX mode as default. |
| */ |
| static int fm_v4l2_fops_open(struct file *file) |
| { |
| int ret; |
| struct fmdev *fmdev = NULL; |
| |
| /* Don't allow multiple open */ |
| if (radio_disconnected) { |
| fmerr("FM device is already opened\n"); |
| return -EBUSY; |
| } |
| |
| fmdev = video_drvdata(file); |
| |
| ret = fmc_prepare(fmdev); |
| if (ret < 0) { |
| fmerr("Unable to prepare FM CORE\n"); |
| return ret; |
| } |
| |
| fmdbg("Load FM RX firmware..\n"); |
| |
| ret = fmc_set_mode(fmdev, FM_MODE_RX); |
| if (ret < 0) { |
| fmerr("Unable to load FM RX firmware\n"); |
| return ret; |
| } |
| radio_disconnected = 1; |
| |
| return ret; |
| } |
| |
| static int fm_v4l2_fops_release(struct file *file) |
| { |
| int ret; |
| struct fmdev *fmdev; |
| |
| fmdev = video_drvdata(file); |
| if (!radio_disconnected) { |
| fmdbg("FM device is already closed\n"); |
| return 0; |
| } |
| |
| ret = fmc_set_mode(fmdev, FM_MODE_OFF); |
| if (ret < 0) { |
| fmerr("Unable to turn off the chip\n"); |
| return ret; |
| } |
| |
| ret = fmc_release(fmdev); |
| if (ret < 0) { |
| fmerr("FM CORE release failed\n"); |
| return ret; |
| } |
| radio_disconnected = 0; |
| |
| return ret; |
| } |
| |
| /* V4L2 RADIO (/dev/radioX) device IOCTL interfaces */ |
| static int fm_v4l2_vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *capability) |
| { |
| strlcpy(capability->driver, FM_DRV_NAME, sizeof(capability->driver)); |
| strlcpy(capability->card, FM_DRV_CARD_SHORT_NAME, |
| sizeof(capability->card)); |
| sprintf(capability->bus_info, "UART"); |
| capability->version = FM_DRV_RADIO_VERSION; |
| capability->capabilities = V4L2_CAP_HW_FREQ_SEEK | V4L2_CAP_TUNER | |
| V4L2_CAP_RADIO | V4L2_CAP_MODULATOR | |
| V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | |
| V4L2_CAP_RDS_CAPTURE; |
| |
| return 0; |
| } |
| |
| static int fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct fmdev *fmdev = container_of(ctrl->handler, |
| struct fmdev, ctrl_handler); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_TUNE_ANTENNA_CAPACITOR: |
| ctrl->cur.val = fm_tx_get_tune_cap_val(fmdev); |
| break; |
| default: |
| fmwarn("%s: Unknown IOCTL: %d\n", __func__, ctrl->id); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int fm_v4l2_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct fmdev *fmdev = container_of(ctrl->handler, |
| struct fmdev, ctrl_handler); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_VOLUME: /* set volume */ |
| return fm_rx_set_volume(fmdev, (u16)ctrl->val); |
| |
| case V4L2_CID_AUDIO_MUTE: /* set mute */ |
| return fmc_set_mute_mode(fmdev, (u8)ctrl->val); |
| |
| case V4L2_CID_TUNE_POWER_LEVEL: |
| /* set TX power level - ext control */ |
| return fm_tx_set_pwr_lvl(fmdev, (u8)ctrl->val); |
| |
| case V4L2_CID_TUNE_PREEMPHASIS: |
| return fm_tx_set_preemph_filter(fmdev, (u8) ctrl->val); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int fm_v4l2_vidioc_g_audio(struct file *file, void *priv, |
| struct v4l2_audio *audio) |
| { |
| memset(audio, 0, sizeof(*audio)); |
| strcpy(audio->name, "Radio"); |
| audio->capability = V4L2_AUDCAP_STEREO; |
| |
| return 0; |
| } |
| |
| static int fm_v4l2_vidioc_s_audio(struct file *file, void *priv, |
| struct v4l2_audio *audio) |
| { |
| if (audio->index != 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /* Get tuner attributes. If current mode is NOT RX, return error */ |
| static int fm_v4l2_vidioc_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *tuner) |
| { |
| struct fmdev *fmdev = video_drvdata(file); |
| u32 bottom_freq; |
| u32 top_freq; |
| u16 stereo_mono_mode; |
| u16 rssilvl; |
| int ret; |
| |
| if (tuner->index != 0) |
| return -EINVAL; |
| |
| if (fmdev->curr_fmmode != FM_MODE_RX) |
| return -EPERM; |
| |
| ret = fm_rx_get_band_freq_range(fmdev, &bottom_freq, &top_freq); |
| if (ret != 0) |
| return ret; |
| |
| ret = fm_rx_get_stereo_mono(fmdev, &stereo_mono_mode); |
| if (ret != 0) |
| return ret; |
| |
| ret = fm_rx_get_rssi_level(fmdev, &rssilvl); |
| if (ret != 0) |
| return ret; |
| |
| strcpy(tuner->name, "FM"); |
| tuner->type = V4L2_TUNER_RADIO; |
| /* Store rangelow and rangehigh freq in unit of 62.5 Hz */ |
| tuner->rangelow = bottom_freq * 16; |
| tuner->rangehigh = top_freq * 16; |
| tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | |
| ((fmdev->rx.rds.flag == FM_RDS_ENABLE) ? V4L2_TUNER_SUB_RDS : 0); |
| tuner->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | |
| V4L2_TUNER_CAP_LOW; |
| tuner->audmode = (stereo_mono_mode ? |
| V4L2_TUNER_MODE_MONO : V4L2_TUNER_MODE_STEREO); |
| |
| /* |
| * Actual rssi value lies in between -128 to +127. |
| * Convert this range from 0 to 255 by adding +128 |
| */ |
| rssilvl += 128; |
| |
| /* |
| * Return signal strength value should be within 0 to 65535. |
| * Find out correct signal radio by multiplying (65535/255) = 257 |
| */ |
| tuner->signal = rssilvl * 257; |
| tuner->afc = 0; |
| |
| return ret; |
| } |
| |
| /* |
| * Set tuner attributes. If current mode is NOT RX, set to RX. |
| * Currently, we set only audio mode (mono/stereo) and RDS state (on/off). |
| * Should we set other tuner attributes, too? |
| */ |
| static int fm_v4l2_vidioc_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *tuner) |
| { |
| struct fmdev *fmdev = video_drvdata(file); |
| u16 aud_mode; |
| u8 rds_mode; |
| int ret; |
| |
| if (tuner->index != 0) |
| return -EINVAL; |
| |
| aud_mode = (tuner->audmode == V4L2_TUNER_MODE_STEREO) ? |
| FM_STEREO_MODE : FM_MONO_MODE; |
| rds_mode = (tuner->rxsubchans & V4L2_TUNER_SUB_RDS) ? |
| FM_RDS_ENABLE : FM_RDS_DISABLE; |
| |
| if (fmdev->curr_fmmode != FM_MODE_RX) { |
| ret = fmc_set_mode(fmdev, FM_MODE_RX); |
| if (ret < 0) { |
| fmerr("Failed to set RX mode\n"); |
| return ret; |
| } |
| } |
| |
| ret = fmc_set_stereo_mono(fmdev, aud_mode); |
| if (ret < 0) { |
| fmerr("Failed to set RX stereo/mono mode\n"); |
| return ret; |
| } |
| |
| ret = fmc_set_rds_mode(fmdev, rds_mode); |
| if (ret < 0) |
| fmerr("Failed to set RX RDS mode\n"); |
| |
| return ret; |
| } |
| |
| /* Get tuner or modulator radio frequency */ |
| static int fm_v4l2_vidioc_g_freq(struct file *file, void *priv, |
| struct v4l2_frequency *freq) |
| { |
| struct fmdev *fmdev = video_drvdata(file); |
| int ret; |
| |
| ret = fmc_get_freq(fmdev, &freq->frequency); |
| if (ret < 0) { |
| fmerr("Failed to get frequency\n"); |
| return ret; |
| } |
| |
| /* Frequency unit of 62.5 Hz*/ |
| freq->frequency = (u32) freq->frequency * 16; |
| |
| return 0; |
| } |
| |
| /* Set tuner or modulator radio frequency */ |
| static int fm_v4l2_vidioc_s_freq(struct file *file, void *priv, |
| struct v4l2_frequency *freq) |
| { |
| struct fmdev *fmdev = video_drvdata(file); |
| |
| /* |
| * As V4L2_TUNER_CAP_LOW is set 1 user sends the frequency |
| * in units of 62.5 Hz. |
| */ |
| freq->frequency = (u32)(freq->frequency / 16); |
| |
| return fmc_set_freq(fmdev, freq->frequency); |
| } |
| |
| /* Set hardware frequency seek. If current mode is NOT RX, set it RX. */ |
| static int fm_v4l2_vidioc_s_hw_freq_seek(struct file *file, void *priv, |
| struct v4l2_hw_freq_seek *seek) |
| { |
| struct fmdev *fmdev = video_drvdata(file); |
| int ret; |
| |
| if (fmdev->curr_fmmode != FM_MODE_RX) { |
| ret = fmc_set_mode(fmdev, FM_MODE_RX); |
| if (ret != 0) { |
| fmerr("Failed to set RX mode\n"); |
| return ret; |
| } |
| } |
| |
| ret = fm_rx_seek(fmdev, seek->seek_upward, seek->wrap_around, |
| seek->spacing); |
| if (ret < 0) |
| fmerr("RX seek failed - %d\n", ret); |
| |
| return ret; |
| } |
| /* Get modulator attributes. If mode is not TX, return no attributes. */ |
| static int fm_v4l2_vidioc_g_modulator(struct file *file, void *priv, |
| struct v4l2_modulator *mod) |
| { |
| struct fmdev *fmdev = video_drvdata(file);; |
| |
| if (mod->index != 0) |
| return -EINVAL; |
| |
| if (fmdev->curr_fmmode != FM_MODE_TX) |
| return -EPERM; |
| |
| mod->txsubchans = ((fmdev->tx_data.aud_mode == FM_STEREO_MODE) ? |
| V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO) | |
| ((fmdev->tx_data.rds.flag == FM_RDS_ENABLE) ? |
| V4L2_TUNER_SUB_RDS : 0); |
| |
| mod->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | |
| V4L2_TUNER_CAP_LOW; |
| |
| return 0; |
| } |
| |
| /* Set modulator attributes. If mode is not TX, set to TX. */ |
| static int fm_v4l2_vidioc_s_modulator(struct file *file, void *priv, |
| struct v4l2_modulator *mod) |
| { |
| struct fmdev *fmdev = video_drvdata(file); |
| u8 rds_mode; |
| u16 aud_mode; |
| int ret; |
| |
| if (mod->index != 0) |
| return -EINVAL; |
| |
| if (fmdev->curr_fmmode != FM_MODE_TX) { |
| ret = fmc_set_mode(fmdev, FM_MODE_TX); |
| if (ret != 0) { |
| fmerr("Failed to set TX mode\n"); |
| return ret; |
| } |
| } |
| |
| aud_mode = (mod->txsubchans & V4L2_TUNER_SUB_STEREO) ? |
| FM_STEREO_MODE : FM_MONO_MODE; |
| rds_mode = (mod->txsubchans & V4L2_TUNER_SUB_RDS) ? |
| FM_RDS_ENABLE : FM_RDS_DISABLE; |
| ret = fm_tx_set_stereo_mono(fmdev, aud_mode); |
| if (ret < 0) { |
| fmerr("Failed to set mono/stereo mode for TX\n"); |
| return ret; |
| } |
| ret = fm_tx_set_rds_mode(fmdev, rds_mode); |
| if (ret < 0) |
| fmerr("Failed to set rds mode for TX\n"); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_file_operations fm_drv_fops = { |
| .owner = THIS_MODULE, |
| .read = fm_v4l2_fops_read, |
| .write = fm_v4l2_fops_write, |
| .poll = fm_v4l2_fops_poll, |
| .unlocked_ioctl = video_ioctl2, |
| .open = fm_v4l2_fops_open, |
| .release = fm_v4l2_fops_release, |
| }; |
| |
| static const struct v4l2_ctrl_ops fm_ctrl_ops = { |
| .s_ctrl = fm_v4l2_s_ctrl, |
| .g_volatile_ctrl = fm_g_volatile_ctrl, |
| }; |
| static const struct v4l2_ioctl_ops fm_drv_ioctl_ops = { |
| .vidioc_querycap = fm_v4l2_vidioc_querycap, |
| .vidioc_g_audio = fm_v4l2_vidioc_g_audio, |
| .vidioc_s_audio = fm_v4l2_vidioc_s_audio, |
| .vidioc_g_tuner = fm_v4l2_vidioc_g_tuner, |
| .vidioc_s_tuner = fm_v4l2_vidioc_s_tuner, |
| .vidioc_g_frequency = fm_v4l2_vidioc_g_freq, |
| .vidioc_s_frequency = fm_v4l2_vidioc_s_freq, |
| .vidioc_s_hw_freq_seek = fm_v4l2_vidioc_s_hw_freq_seek, |
| .vidioc_g_modulator = fm_v4l2_vidioc_g_modulator, |
| .vidioc_s_modulator = fm_v4l2_vidioc_s_modulator |
| }; |
| |
| /* V4L2 RADIO device parent structure */ |
| static struct video_device fm_viddev_template = { |
| .fops = &fm_drv_fops, |
| .ioctl_ops = &fm_drv_ioctl_ops, |
| .name = FM_DRV_NAME, |
| .release = video_device_release, |
| }; |
| |
| int fm_v4l2_init_video_device(struct fmdev *fmdev, int radio_nr) |
| { |
| struct v4l2_ctrl *ctrl; |
| int ret; |
| |
| /* Init mutex for core locking */ |
| mutex_init(&fmdev->mutex); |
| |
| /* Allocate new video device */ |
| gradio_dev = video_device_alloc(); |
| if (NULL == gradio_dev) { |
| fmerr("Can't allocate video device\n"); |
| return -ENOMEM; |
| } |
| |
| /* Setup FM driver's V4L2 properties */ |
| memcpy(gradio_dev, &fm_viddev_template, sizeof(fm_viddev_template)); |
| |
| video_set_drvdata(gradio_dev, fmdev); |
| |
| gradio_dev->lock = &fmdev->mutex; |
| |
| /* Register with V4L2 subsystem as RADIO device */ |
| if (video_register_device(gradio_dev, VFL_TYPE_RADIO, radio_nr)) { |
| video_device_release(gradio_dev); |
| fmerr("Could not register video device\n"); |
| return -ENOMEM; |
| } |
| |
| fmdev->radio_dev = gradio_dev; |
| |
| /* Register to v4l2 ctrl handler framework */ |
| fmdev->radio_dev->ctrl_handler = &fmdev->ctrl_handler; |
| |
| ret = v4l2_ctrl_handler_init(&fmdev->ctrl_handler, 5); |
| if (ret < 0) { |
| fmerr("(fmdev): Can't init ctrl handler\n"); |
| v4l2_ctrl_handler_free(&fmdev->ctrl_handler); |
| return -EBUSY; |
| } |
| |
| /* |
| * Following controls are handled by V4L2 control framework. |
| * Added in ascending ID order. |
| */ |
| v4l2_ctrl_new_std(&fmdev->ctrl_handler, &fm_ctrl_ops, |
| V4L2_CID_AUDIO_VOLUME, FM_RX_VOLUME_MIN, |
| FM_RX_VOLUME_MAX, 1, FM_RX_VOLUME_MAX); |
| |
| v4l2_ctrl_new_std(&fmdev->ctrl_handler, &fm_ctrl_ops, |
| V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); |
| |
| v4l2_ctrl_new_std_menu(&fmdev->ctrl_handler, &fm_ctrl_ops, |
| V4L2_CID_TUNE_PREEMPHASIS, V4L2_PREEMPHASIS_75_uS, |
| 0, V4L2_PREEMPHASIS_75_uS); |
| |
| v4l2_ctrl_new_std(&fmdev->ctrl_handler, &fm_ctrl_ops, |
| V4L2_CID_TUNE_POWER_LEVEL, FM_PWR_LVL_LOW, |
| FM_PWR_LVL_HIGH, 1, FM_PWR_LVL_HIGH); |
| |
| ctrl = v4l2_ctrl_new_std(&fmdev->ctrl_handler, &fm_ctrl_ops, |
| V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, |
| 255, 1, 255); |
| |
| if (ctrl) |
| ctrl->is_volatile = 1; |
| |
| return 0; |
| } |
| |
| void *fm_v4l2_deinit_video_device(void) |
| { |
| struct fmdev *fmdev; |
| |
| |
| fmdev = video_get_drvdata(gradio_dev); |
| |
| /* Unregister to v4l2 ctrl handler framework*/ |
| v4l2_ctrl_handler_free(&fmdev->ctrl_handler); |
| |
| /* Unregister RADIO device from V4L2 subsystem */ |
| video_unregister_device(gradio_dev); |
| |
| return fmdev; |
| } |