| /* |
| * entry_from_vm86.c - tests kernel entries from vm86 mode |
| * Copyright (c) 2014-2015 Andrew Lutomirski |
| * |
| * This exercises a few paths that need to special-case vm86 mode. |
| * |
| * GPL v2. |
| */ |
| |
| #define _GNU_SOURCE |
| |
| #include <assert.h> |
| #include <stdlib.h> |
| #include <sys/syscall.h> |
| #include <sys/signal.h> |
| #include <sys/ucontext.h> |
| #include <unistd.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include <inttypes.h> |
| #include <sys/mman.h> |
| #include <err.h> |
| #include <stddef.h> |
| #include <stdbool.h> |
| #include <errno.h> |
| #include <sys/vm86.h> |
| |
| static unsigned long load_addr = 0x10000; |
| static int nerrs = 0; |
| |
| static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), |
| int flags) |
| { |
| struct sigaction sa; |
| memset(&sa, 0, sizeof(sa)); |
| sa.sa_sigaction = handler; |
| sa.sa_flags = SA_SIGINFO | flags; |
| sigemptyset(&sa.sa_mask); |
| if (sigaction(sig, &sa, 0)) |
| err(1, "sigaction"); |
| } |
| |
| static void clearhandler(int sig) |
| { |
| struct sigaction sa; |
| memset(&sa, 0, sizeof(sa)); |
| sa.sa_handler = SIG_DFL; |
| sigemptyset(&sa.sa_mask); |
| if (sigaction(sig, &sa, 0)) |
| err(1, "sigaction"); |
| } |
| |
| static sig_atomic_t got_signal; |
| |
| static void sighandler(int sig, siginfo_t *info, void *ctx_void) |
| { |
| ucontext_t *ctx = (ucontext_t*)ctx_void; |
| |
| if (ctx->uc_mcontext.gregs[REG_EFL] & X86_EFLAGS_VM || |
| (ctx->uc_mcontext.gregs[REG_CS] & 3) != 3) { |
| printf("[FAIL]\tSignal frame should not reflect vm86 mode\n"); |
| nerrs++; |
| } |
| |
| const char *signame; |
| if (sig == SIGSEGV) |
| signame = "SIGSEGV"; |
| else if (sig == SIGILL) |
| signame = "SIGILL"; |
| else |
| signame = "unexpected signal"; |
| |
| printf("[INFO]\t%s: FLAGS = 0x%lx, CS = 0x%hx\n", signame, |
| (unsigned long)ctx->uc_mcontext.gregs[REG_EFL], |
| (unsigned short)ctx->uc_mcontext.gregs[REG_CS]); |
| |
| got_signal = 1; |
| } |
| |
| asm ( |
| ".pushsection .rodata\n\t" |
| ".type vmcode_bound, @object\n\t" |
| "vmcode:\n\t" |
| "vmcode_bound:\n\t" |
| ".code16\n\t" |
| "bound %ax, (2048)\n\t" |
| "int3\n\t" |
| "vmcode_sysenter:\n\t" |
| "sysenter\n\t" |
| "vmcode_syscall:\n\t" |
| "syscall\n\t" |
| "vmcode_sti:\n\t" |
| "sti\n\t" |
| "vmcode_int3:\n\t" |
| "int3\n\t" |
| "vmcode_int80:\n\t" |
| "int $0x80\n\t" |
| ".size vmcode, . - vmcode\n\t" |
| "end_vmcode:\n\t" |
| ".code32\n\t" |
| ".popsection" |
| ); |
| |
| extern unsigned char vmcode[], end_vmcode[]; |
| extern unsigned char vmcode_bound[], vmcode_sysenter[], vmcode_syscall[], |
| vmcode_sti[], vmcode_int3[], vmcode_int80[]; |
| |
| /* Returns false if the test was skipped. */ |
| static bool do_test(struct vm86plus_struct *v86, unsigned long eip, |
| unsigned int rettype, unsigned int retarg, |
| const char *text) |
| { |
| long ret; |
| |
| printf("[RUN]\t%s from vm86 mode\n", text); |
| v86->regs.eip = eip; |
| ret = vm86(VM86_ENTER, v86); |
| |
| if (ret == -1 && (errno == ENOSYS || errno == EPERM)) { |
| printf("[SKIP]\tvm86 %s\n", |
| errno == ENOSYS ? "not supported" : "not allowed"); |
| return false; |
| } |
| |
| if (VM86_TYPE(ret) == VM86_INTx) { |
| char trapname[32]; |
| int trapno = VM86_ARG(ret); |
| if (trapno == 13) |
| strcpy(trapname, "GP"); |
| else if (trapno == 5) |
| strcpy(trapname, "BR"); |
| else if (trapno == 14) |
| strcpy(trapname, "PF"); |
| else |
| sprintf(trapname, "%d", trapno); |
| |
| printf("[INFO]\tExited vm86 mode due to #%s\n", trapname); |
| } else if (VM86_TYPE(ret) == VM86_UNKNOWN) { |
| printf("[INFO]\tExited vm86 mode due to unhandled GP fault\n"); |
| } else if (VM86_TYPE(ret) == VM86_TRAP) { |
| printf("[INFO]\tExited vm86 mode due to a trap (arg=%ld)\n", |
| VM86_ARG(ret)); |
| } else if (VM86_TYPE(ret) == VM86_SIGNAL) { |
| printf("[INFO]\tExited vm86 mode due to a signal\n"); |
| } else if (VM86_TYPE(ret) == VM86_STI) { |
| printf("[INFO]\tExited vm86 mode due to STI\n"); |
| } else { |
| printf("[INFO]\tExited vm86 mode due to type %ld, arg %ld\n", |
| VM86_TYPE(ret), VM86_ARG(ret)); |
| } |
| |
| if (rettype == -1 || |
| (VM86_TYPE(ret) == rettype && VM86_ARG(ret) == retarg)) { |
| printf("[OK]\tReturned correctly\n"); |
| } else { |
| printf("[FAIL]\tIncorrect return reason\n"); |
| nerrs++; |
| } |
| |
| return true; |
| } |
| |
| int main(void) |
| { |
| struct vm86plus_struct v86; |
| unsigned char *addr = mmap((void *)load_addr, 4096, |
| PROT_READ | PROT_WRITE | PROT_EXEC, |
| MAP_ANONYMOUS | MAP_PRIVATE, -1,0); |
| if (addr != (unsigned char *)load_addr) |
| err(1, "mmap"); |
| |
| memcpy(addr, vmcode, end_vmcode - vmcode); |
| addr[2048] = 2; |
| addr[2050] = 3; |
| |
| memset(&v86, 0, sizeof(v86)); |
| |
| v86.regs.cs = load_addr / 16; |
| v86.regs.ss = load_addr / 16; |
| v86.regs.ds = load_addr / 16; |
| v86.regs.es = load_addr / 16; |
| |
| assert((v86.regs.cs & 3) == 0); /* Looks like RPL = 0 */ |
| |
| /* #BR -- should deliver SIG??? */ |
| do_test(&v86, vmcode_bound - vmcode, VM86_INTx, 5, "#BR"); |
| |
| /* |
| * SYSENTER -- should cause #GP or #UD depending on CPU. |
| * Expected return type -1 means that we shouldn't validate |
| * the vm86 return value. This will avoid problems on non-SEP |
| * CPUs. |
| */ |
| sethandler(SIGILL, sighandler, 0); |
| do_test(&v86, vmcode_sysenter - vmcode, -1, 0, "SYSENTER"); |
| clearhandler(SIGILL); |
| |
| /* |
| * SYSCALL would be a disaster in VM86 mode. Fortunately, |
| * there is no kernel that both enables SYSCALL and sets |
| * EFER.SCE, so it's #UD on all systems. But vm86 is |
| * buggy (or has a "feature"), so the SIGILL will actually |
| * be delivered. |
| */ |
| sethandler(SIGILL, sighandler, 0); |
| do_test(&v86, vmcode_syscall - vmcode, VM86_SIGNAL, 0, "SYSCALL"); |
| clearhandler(SIGILL); |
| |
| /* STI with VIP set */ |
| v86.regs.eflags |= X86_EFLAGS_VIP; |
| v86.regs.eflags &= ~X86_EFLAGS_IF; |
| do_test(&v86, vmcode_sti - vmcode, VM86_STI, 0, "STI with VIP set"); |
| |
| /* INT3 -- should cause #BP */ |
| do_test(&v86, vmcode_int3 - vmcode, VM86_TRAP, 3, "INT3"); |
| |
| /* INT80 -- should exit with "INTx 0x80" */ |
| v86.regs.eax = (unsigned int)-1; |
| do_test(&v86, vmcode_int80 - vmcode, VM86_INTx, 0x80, "int80"); |
| |
| /* Execute a null pointer */ |
| v86.regs.cs = 0; |
| v86.regs.ss = 0; |
| sethandler(SIGSEGV, sighandler, 0); |
| got_signal = 0; |
| if (do_test(&v86, 0, VM86_SIGNAL, 0, "Execute null pointer") && |
| !got_signal) { |
| printf("[FAIL]\tDid not receive SIGSEGV\n"); |
| nerrs++; |
| } |
| clearhandler(SIGSEGV); |
| |
| /* Make sure nothing explodes if we fork. */ |
| if (fork() > 0) |
| return 0; |
| |
| return (nerrs == 0 ? 0 : 1); |
| } |