| /* |
| * Copyright 2006 Dave Airlie <airlied@linux.ie> |
| * Copyright © 2006-2007 Intel Corporation |
| * Jesse Barnes <jesse.barnes@intel.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| */ |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/export.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_edid.h> |
| #include "intel_drv.h" |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "intel_sdvo_regs.h" |
| |
| #define SDVO_TMDS_MASK (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1) |
| #define SDVO_RGB_MASK (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1) |
| #define SDVO_LVDS_MASK (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1) |
| #define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_YPRPB0) |
| |
| #define SDVO_OUTPUT_MASK (SDVO_TMDS_MASK | SDVO_RGB_MASK | SDVO_LVDS_MASK |\ |
| SDVO_TV_MASK) |
| |
| #define IS_TV(c) (c->output_flag & SDVO_TV_MASK) |
| #define IS_TMDS(c) (c->output_flag & SDVO_TMDS_MASK) |
| #define IS_LVDS(c) (c->output_flag & SDVO_LVDS_MASK) |
| #define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK)) |
| #define IS_DIGITAL(c) (c->output_flag & (SDVO_TMDS_MASK | SDVO_LVDS_MASK)) |
| |
| |
| static const char * const tv_format_names[] = { |
| "NTSC_M" , "NTSC_J" , "NTSC_443", |
| "PAL_B" , "PAL_D" , "PAL_G" , |
| "PAL_H" , "PAL_I" , "PAL_M" , |
| "PAL_N" , "PAL_NC" , "PAL_60" , |
| "SECAM_B" , "SECAM_D" , "SECAM_G" , |
| "SECAM_K" , "SECAM_K1", "SECAM_L" , |
| "SECAM_60" |
| }; |
| |
| #define TV_FORMAT_NUM ARRAY_SIZE(tv_format_names) |
| |
| struct intel_sdvo { |
| struct intel_encoder base; |
| |
| struct i2c_adapter *i2c; |
| u8 slave_addr; |
| |
| struct i2c_adapter ddc; |
| |
| /* Register for the SDVO device: SDVOB or SDVOC */ |
| i915_reg_t sdvo_reg; |
| |
| /* Active outputs controlled by this SDVO output */ |
| uint16_t controlled_output; |
| |
| /* |
| * Capabilities of the SDVO device returned by |
| * intel_sdvo_get_capabilities() |
| */ |
| struct intel_sdvo_caps caps; |
| |
| /* Pixel clock limitations reported by the SDVO device, in kHz */ |
| int pixel_clock_min, pixel_clock_max; |
| |
| /* |
| * For multiple function SDVO device, |
| * this is for current attached outputs. |
| */ |
| uint16_t attached_output; |
| |
| /* |
| * Hotplug activation bits for this device |
| */ |
| uint16_t hotplug_active; |
| |
| /** |
| * This is set if we're going to treat the device as TV-out. |
| * |
| * While we have these nice friendly flags for output types that ought |
| * to decide this for us, the S-Video output on our HDMI+S-Video card |
| * shows up as RGB1 (VGA). |
| */ |
| bool is_tv; |
| |
| enum port port; |
| |
| /** |
| * This is set if we treat the device as HDMI, instead of DVI. |
| */ |
| bool is_hdmi; |
| bool has_hdmi_monitor; |
| bool has_hdmi_audio; |
| bool rgb_quant_range_selectable; |
| |
| /** |
| * This is set if we detect output of sdvo device as LVDS and |
| * have a valid fixed mode to use with the panel. |
| */ |
| bool is_lvds; |
| |
| /** |
| * This is sdvo fixed pannel mode pointer |
| */ |
| struct drm_display_mode *sdvo_lvds_fixed_mode; |
| |
| /* DDC bus used by this SDVO encoder */ |
| uint8_t ddc_bus; |
| |
| /* |
| * the sdvo flag gets lost in round trip: dtd->adjusted_mode->dtd |
| */ |
| uint8_t dtd_sdvo_flags; |
| }; |
| |
| struct intel_sdvo_connector { |
| struct intel_connector base; |
| |
| /* Mark the type of connector */ |
| uint16_t output_flag; |
| |
| /* This contains all current supported TV format */ |
| u8 tv_format_supported[TV_FORMAT_NUM]; |
| int format_supported_num; |
| struct drm_property *tv_format; |
| |
| /* add the property for the SDVO-TV */ |
| struct drm_property *left; |
| struct drm_property *right; |
| struct drm_property *top; |
| struct drm_property *bottom; |
| struct drm_property *hpos; |
| struct drm_property *vpos; |
| struct drm_property *contrast; |
| struct drm_property *saturation; |
| struct drm_property *hue; |
| struct drm_property *sharpness; |
| struct drm_property *flicker_filter; |
| struct drm_property *flicker_filter_adaptive; |
| struct drm_property *flicker_filter_2d; |
| struct drm_property *tv_chroma_filter; |
| struct drm_property *tv_luma_filter; |
| struct drm_property *dot_crawl; |
| |
| /* add the property for the SDVO-TV/LVDS */ |
| struct drm_property *brightness; |
| |
| /* this is to get the range of margin.*/ |
| u32 max_hscan, max_vscan; |
| }; |
| |
| struct intel_sdvo_connector_state { |
| /* base.base: tv.saturation/contrast/hue/brightness */ |
| struct intel_digital_connector_state base; |
| |
| struct { |
| unsigned overscan_h, overscan_v, hpos, vpos, sharpness; |
| unsigned flicker_filter, flicker_filter_2d, flicker_filter_adaptive; |
| unsigned chroma_filter, luma_filter, dot_crawl; |
| } tv; |
| }; |
| |
| static struct intel_sdvo *to_sdvo(struct intel_encoder *encoder) |
| { |
| return container_of(encoder, struct intel_sdvo, base); |
| } |
| |
| static struct intel_sdvo *intel_attached_sdvo(struct drm_connector *connector) |
| { |
| return to_sdvo(intel_attached_encoder(connector)); |
| } |
| |
| static struct intel_sdvo_connector * |
| to_intel_sdvo_connector(struct drm_connector *connector) |
| { |
| return container_of(connector, struct intel_sdvo_connector, base.base); |
| } |
| |
| static struct intel_sdvo_connector_state * |
| to_intel_sdvo_connector_state(struct drm_connector_state *conn_state) |
| { |
| return container_of(conn_state, struct intel_sdvo_connector_state, base.base); |
| } |
| |
| static bool |
| intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags); |
| static bool |
| intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_connector *intel_sdvo_connector, |
| int type); |
| static bool |
| intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_connector *intel_sdvo_connector); |
| |
| /** |
| * Writes the SDVOB or SDVOC with the given value, but always writes both |
| * SDVOB and SDVOC to work around apparent hardware issues (according to |
| * comments in the BIOS). |
| */ |
| static void intel_sdvo_write_sdvox(struct intel_sdvo *intel_sdvo, u32 val) |
| { |
| struct drm_device *dev = intel_sdvo->base.base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| u32 bval = val, cval = val; |
| int i; |
| |
| if (HAS_PCH_SPLIT(dev_priv)) { |
| I915_WRITE(intel_sdvo->sdvo_reg, val); |
| POSTING_READ(intel_sdvo->sdvo_reg); |
| /* |
| * HW workaround, need to write this twice for issue |
| * that may result in first write getting masked. |
| */ |
| if (HAS_PCH_IBX(dev_priv)) { |
| I915_WRITE(intel_sdvo->sdvo_reg, val); |
| POSTING_READ(intel_sdvo->sdvo_reg); |
| } |
| return; |
| } |
| |
| if (intel_sdvo->port == PORT_B) |
| cval = I915_READ(GEN3_SDVOC); |
| else |
| bval = I915_READ(GEN3_SDVOB); |
| |
| /* |
| * Write the registers twice for luck. Sometimes, |
| * writing them only once doesn't appear to 'stick'. |
| * The BIOS does this too. Yay, magic |
| */ |
| for (i = 0; i < 2; i++) |
| { |
| I915_WRITE(GEN3_SDVOB, bval); |
| POSTING_READ(GEN3_SDVOB); |
| I915_WRITE(GEN3_SDVOC, cval); |
| POSTING_READ(GEN3_SDVOC); |
| } |
| } |
| |
| static bool intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch) |
| { |
| struct i2c_msg msgs[] = { |
| { |
| .addr = intel_sdvo->slave_addr, |
| .flags = 0, |
| .len = 1, |
| .buf = &addr, |
| }, |
| { |
| .addr = intel_sdvo->slave_addr, |
| .flags = I2C_M_RD, |
| .len = 1, |
| .buf = ch, |
| } |
| }; |
| int ret; |
| |
| if ((ret = i2c_transfer(intel_sdvo->i2c, msgs, 2)) == 2) |
| return true; |
| |
| DRM_DEBUG_KMS("i2c transfer returned %d\n", ret); |
| return false; |
| } |
| |
| #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} |
| /** Mapping of command numbers to names, for debug output */ |
| static const struct _sdvo_cmd_name { |
| u8 cmd; |
| const char *name; |
| } __attribute__ ((packed)) sdvo_cmd_names[] = { |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS), |
| |
| /* Add the op code for SDVO enhancements */ |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HPOS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HPOS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HPOS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_VPOS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_VPOS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_VPOS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_2D), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_2D), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_2D), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SHARPNESS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SHARPNESS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SHARPNESS), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DOT_CRAWL), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DOT_CRAWL), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_CHROMA_FILTER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_CHROMA_FILTER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_CHROMA_FILTER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_LUMA_FILTER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_LUMA_FILTER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_LUMA_FILTER), |
| |
| /* HDMI op code */ |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA), |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA), |
| }; |
| |
| #define SDVO_NAME(svdo) ((svdo)->port == PORT_B ? "SDVOB" : "SDVOC") |
| |
| static void intel_sdvo_debug_write(struct intel_sdvo *intel_sdvo, u8 cmd, |
| const void *args, int args_len) |
| { |
| int i, pos = 0; |
| #define BUF_LEN 256 |
| char buffer[BUF_LEN]; |
| |
| #define BUF_PRINT(args...) \ |
| pos += snprintf(buffer + pos, max_t(int, BUF_LEN - pos, 0), args) |
| |
| |
| for (i = 0; i < args_len; i++) { |
| BUF_PRINT("%02X ", ((u8 *)args)[i]); |
| } |
| for (; i < 8; i++) { |
| BUF_PRINT(" "); |
| } |
| for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) { |
| if (cmd == sdvo_cmd_names[i].cmd) { |
| BUF_PRINT("(%s)", sdvo_cmd_names[i].name); |
| break; |
| } |
| } |
| if (i == ARRAY_SIZE(sdvo_cmd_names)) { |
| BUF_PRINT("(%02X)", cmd); |
| } |
| BUG_ON(pos >= BUF_LEN - 1); |
| #undef BUF_PRINT |
| #undef BUF_LEN |
| |
| DRM_DEBUG_KMS("%s: W: %02X %s\n", SDVO_NAME(intel_sdvo), cmd, buffer); |
| } |
| |
| static const char * const cmd_status_names[] = { |
| "Power on", |
| "Success", |
| "Not supported", |
| "Invalid arg", |
| "Pending", |
| "Target not specified", |
| "Scaling not supported" |
| }; |
| |
| static bool __intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, |
| const void *args, int args_len, |
| bool unlocked) |
| { |
| u8 *buf, status; |
| struct i2c_msg *msgs; |
| int i, ret = true; |
| |
| /* Would be simpler to allocate both in one go ? */ |
| buf = kzalloc(args_len * 2 + 2, GFP_KERNEL); |
| if (!buf) |
| return false; |
| |
| msgs = kcalloc(args_len + 3, sizeof(*msgs), GFP_KERNEL); |
| if (!msgs) { |
| kfree(buf); |
| return false; |
| } |
| |
| intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len); |
| |
| for (i = 0; i < args_len; i++) { |
| msgs[i].addr = intel_sdvo->slave_addr; |
| msgs[i].flags = 0; |
| msgs[i].len = 2; |
| msgs[i].buf = buf + 2 *i; |
| buf[2*i + 0] = SDVO_I2C_ARG_0 - i; |
| buf[2*i + 1] = ((u8*)args)[i]; |
| } |
| msgs[i].addr = intel_sdvo->slave_addr; |
| msgs[i].flags = 0; |
| msgs[i].len = 2; |
| msgs[i].buf = buf + 2*i; |
| buf[2*i + 0] = SDVO_I2C_OPCODE; |
| buf[2*i + 1] = cmd; |
| |
| /* the following two are to read the response */ |
| status = SDVO_I2C_CMD_STATUS; |
| msgs[i+1].addr = intel_sdvo->slave_addr; |
| msgs[i+1].flags = 0; |
| msgs[i+1].len = 1; |
| msgs[i+1].buf = &status; |
| |
| msgs[i+2].addr = intel_sdvo->slave_addr; |
| msgs[i+2].flags = I2C_M_RD; |
| msgs[i+2].len = 1; |
| msgs[i+2].buf = &status; |
| |
| if (unlocked) |
| ret = i2c_transfer(intel_sdvo->i2c, msgs, i+3); |
| else |
| ret = __i2c_transfer(intel_sdvo->i2c, msgs, i+3); |
| if (ret < 0) { |
| DRM_DEBUG_KMS("I2c transfer returned %d\n", ret); |
| ret = false; |
| goto out; |
| } |
| if (ret != i+3) { |
| /* failure in I2C transfer */ |
| DRM_DEBUG_KMS("I2c transfer returned %d/%d\n", ret, i+3); |
| ret = false; |
| } |
| |
| out: |
| kfree(msgs); |
| kfree(buf); |
| return ret; |
| } |
| |
| static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, |
| const void *args, int args_len) |
| { |
| return __intel_sdvo_write_cmd(intel_sdvo, cmd, args, args_len, true); |
| } |
| |
| static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo, |
| void *response, int response_len) |
| { |
| u8 retry = 15; /* 5 quick checks, followed by 10 long checks */ |
| u8 status; |
| int i, pos = 0; |
| #define BUF_LEN 256 |
| char buffer[BUF_LEN]; |
| |
| |
| /* |
| * The documentation states that all commands will be |
| * processed within 15µs, and that we need only poll |
| * the status byte a maximum of 3 times in order for the |
| * command to be complete. |
| * |
| * Check 5 times in case the hardware failed to read the docs. |
| * |
| * Also beware that the first response by many devices is to |
| * reply PENDING and stall for time. TVs are notorious for |
| * requiring longer than specified to complete their replies. |
| * Originally (in the DDX long ago), the delay was only ever 15ms |
| * with an additional delay of 30ms applied for TVs added later after |
| * many experiments. To accommodate both sets of delays, we do a |
| * sequence of slow checks if the device is falling behind and fails |
| * to reply within 5*15µs. |
| */ |
| if (!intel_sdvo_read_byte(intel_sdvo, |
| SDVO_I2C_CMD_STATUS, |
| &status)) |
| goto log_fail; |
| |
| while ((status == SDVO_CMD_STATUS_PENDING || |
| status == SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED) && --retry) { |
| if (retry < 10) |
| msleep(15); |
| else |
| udelay(15); |
| |
| if (!intel_sdvo_read_byte(intel_sdvo, |
| SDVO_I2C_CMD_STATUS, |
| &status)) |
| goto log_fail; |
| } |
| |
| #define BUF_PRINT(args...) \ |
| pos += snprintf(buffer + pos, max_t(int, BUF_LEN - pos, 0), args) |
| |
| if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) |
| BUF_PRINT("(%s)", cmd_status_names[status]); |
| else |
| BUF_PRINT("(??? %d)", status); |
| |
| if (status != SDVO_CMD_STATUS_SUCCESS) |
| goto log_fail; |
| |
| /* Read the command response */ |
| for (i = 0; i < response_len; i++) { |
| if (!intel_sdvo_read_byte(intel_sdvo, |
| SDVO_I2C_RETURN_0 + i, |
| &((u8 *)response)[i])) |
| goto log_fail; |
| BUF_PRINT(" %02X", ((u8 *)response)[i]); |
| } |
| BUG_ON(pos >= BUF_LEN - 1); |
| #undef BUF_PRINT |
| #undef BUF_LEN |
| |
| DRM_DEBUG_KMS("%s: R: %s\n", SDVO_NAME(intel_sdvo), buffer); |
| return true; |
| |
| log_fail: |
| DRM_DEBUG_KMS("%s: R: ... failed\n", SDVO_NAME(intel_sdvo)); |
| return false; |
| } |
| |
| static int intel_sdvo_get_pixel_multiplier(const struct drm_display_mode *adjusted_mode) |
| { |
| if (adjusted_mode->crtc_clock >= 100000) |
| return 1; |
| else if (adjusted_mode->crtc_clock >= 50000) |
| return 2; |
| else |
| return 4; |
| } |
| |
| static bool __intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo, |
| u8 ddc_bus) |
| { |
| /* This must be the immediately preceding write before the i2c xfer */ |
| return __intel_sdvo_write_cmd(intel_sdvo, |
| SDVO_CMD_SET_CONTROL_BUS_SWITCH, |
| &ddc_bus, 1, false); |
| } |
| |
| static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len) |
| { |
| if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len)) |
| return false; |
| |
| return intel_sdvo_read_response(intel_sdvo, NULL, 0); |
| } |
| |
| static bool |
| intel_sdvo_get_value(struct intel_sdvo *intel_sdvo, u8 cmd, void *value, int len) |
| { |
| if (!intel_sdvo_write_cmd(intel_sdvo, cmd, NULL, 0)) |
| return false; |
| |
| return intel_sdvo_read_response(intel_sdvo, value, len); |
| } |
| |
| static bool intel_sdvo_set_target_input(struct intel_sdvo *intel_sdvo) |
| { |
| struct intel_sdvo_set_target_input_args targets = {0}; |
| return intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_TARGET_INPUT, |
| &targets, sizeof(targets)); |
| } |
| |
| /** |
| * Return whether each input is trained. |
| * |
| * This function is making an assumption about the layout of the response, |
| * which should be checked against the docs. |
| */ |
| static bool intel_sdvo_get_trained_inputs(struct intel_sdvo *intel_sdvo, bool *input_1, bool *input_2) |
| { |
| struct intel_sdvo_get_trained_inputs_response response; |
| |
| BUILD_BUG_ON(sizeof(response) != 1); |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_TRAINED_INPUTS, |
| &response, sizeof(response))) |
| return false; |
| |
| *input_1 = response.input0_trained; |
| *input_2 = response.input1_trained; |
| return true; |
| } |
| |
| static bool intel_sdvo_set_active_outputs(struct intel_sdvo *intel_sdvo, |
| u16 outputs) |
| { |
| return intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_ACTIVE_OUTPUTS, |
| &outputs, sizeof(outputs)); |
| } |
| |
| static bool intel_sdvo_get_active_outputs(struct intel_sdvo *intel_sdvo, |
| u16 *outputs) |
| { |
| return intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_ACTIVE_OUTPUTS, |
| outputs, sizeof(*outputs)); |
| } |
| |
| static bool intel_sdvo_set_encoder_power_state(struct intel_sdvo *intel_sdvo, |
| int mode) |
| { |
| u8 state = SDVO_ENCODER_STATE_ON; |
| |
| switch (mode) { |
| case DRM_MODE_DPMS_ON: |
| state = SDVO_ENCODER_STATE_ON; |
| break; |
| case DRM_MODE_DPMS_STANDBY: |
| state = SDVO_ENCODER_STATE_STANDBY; |
| break; |
| case DRM_MODE_DPMS_SUSPEND: |
| state = SDVO_ENCODER_STATE_SUSPEND; |
| break; |
| case DRM_MODE_DPMS_OFF: |
| state = SDVO_ENCODER_STATE_OFF; |
| break; |
| } |
| |
| return intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_ENCODER_POWER_STATE, &state, sizeof(state)); |
| } |
| |
| static bool intel_sdvo_get_input_pixel_clock_range(struct intel_sdvo *intel_sdvo, |
| int *clock_min, |
| int *clock_max) |
| { |
| struct intel_sdvo_pixel_clock_range clocks; |
| |
| BUILD_BUG_ON(sizeof(clocks) != 4); |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, |
| &clocks, sizeof(clocks))) |
| return false; |
| |
| /* Convert the values from units of 10 kHz to kHz. */ |
| *clock_min = clocks.min * 10; |
| *clock_max = clocks.max * 10; |
| return true; |
| } |
| |
| static bool intel_sdvo_set_target_output(struct intel_sdvo *intel_sdvo, |
| u16 outputs) |
| { |
| return intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_TARGET_OUTPUT, |
| &outputs, sizeof(outputs)); |
| } |
| |
| static bool intel_sdvo_set_timing(struct intel_sdvo *intel_sdvo, u8 cmd, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_set_value(intel_sdvo, cmd, &dtd->part1, sizeof(dtd->part1)) && |
| intel_sdvo_set_value(intel_sdvo, cmd + 1, &dtd->part2, sizeof(dtd->part2)); |
| } |
| |
| static bool intel_sdvo_get_timing(struct intel_sdvo *intel_sdvo, u8 cmd, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_get_value(intel_sdvo, cmd, &dtd->part1, sizeof(dtd->part1)) && |
| intel_sdvo_get_value(intel_sdvo, cmd + 1, &dtd->part2, sizeof(dtd->part2)); |
| } |
| |
| static bool intel_sdvo_set_input_timing(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_set_timing(intel_sdvo, |
| SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd); |
| } |
| |
| static bool intel_sdvo_set_output_timing(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_set_timing(intel_sdvo, |
| SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); |
| } |
| |
| static bool intel_sdvo_get_input_timing(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_dtd *dtd) |
| { |
| return intel_sdvo_get_timing(intel_sdvo, |
| SDVO_CMD_GET_INPUT_TIMINGS_PART1, dtd); |
| } |
| |
| static bool |
| intel_sdvo_create_preferred_input_timing(struct intel_sdvo *intel_sdvo, |
| uint16_t clock, |
| uint16_t width, |
| uint16_t height) |
| { |
| struct intel_sdvo_preferred_input_timing_args args; |
| |
| memset(&args, 0, sizeof(args)); |
| args.clock = clock; |
| args.width = width; |
| args.height = height; |
| args.interlace = 0; |
| |
| if (intel_sdvo->is_lvds && |
| (intel_sdvo->sdvo_lvds_fixed_mode->hdisplay != width || |
| intel_sdvo->sdvo_lvds_fixed_mode->vdisplay != height)) |
| args.scaled = 1; |
| |
| return intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING, |
| &args, sizeof(args)); |
| } |
| |
| static bool intel_sdvo_get_preferred_input_timing(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_dtd *dtd) |
| { |
| BUILD_BUG_ON(sizeof(dtd->part1) != 8); |
| BUILD_BUG_ON(sizeof(dtd->part2) != 8); |
| return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1, |
| &dtd->part1, sizeof(dtd->part1)) && |
| intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2, |
| &dtd->part2, sizeof(dtd->part2)); |
| } |
| |
| static bool intel_sdvo_set_clock_rate_mult(struct intel_sdvo *intel_sdvo, u8 val) |
| { |
| return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1); |
| } |
| |
| static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, |
| const struct drm_display_mode *mode) |
| { |
| uint16_t width, height; |
| uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; |
| uint16_t h_sync_offset, v_sync_offset; |
| int mode_clock; |
| |
| memset(dtd, 0, sizeof(*dtd)); |
| |
| width = mode->hdisplay; |
| height = mode->vdisplay; |
| |
| /* do some mode translations */ |
| h_blank_len = mode->htotal - mode->hdisplay; |
| h_sync_len = mode->hsync_end - mode->hsync_start; |
| |
| v_blank_len = mode->vtotal - mode->vdisplay; |
| v_sync_len = mode->vsync_end - mode->vsync_start; |
| |
| h_sync_offset = mode->hsync_start - mode->hdisplay; |
| v_sync_offset = mode->vsync_start - mode->vdisplay; |
| |
| mode_clock = mode->clock; |
| mode_clock /= 10; |
| dtd->part1.clock = mode_clock; |
| |
| dtd->part1.h_active = width & 0xff; |
| dtd->part1.h_blank = h_blank_len & 0xff; |
| dtd->part1.h_high = (((width >> 8) & 0xf) << 4) | |
| ((h_blank_len >> 8) & 0xf); |
| dtd->part1.v_active = height & 0xff; |
| dtd->part1.v_blank = v_blank_len & 0xff; |
| dtd->part1.v_high = (((height >> 8) & 0xf) << 4) | |
| ((v_blank_len >> 8) & 0xf); |
| |
| dtd->part2.h_sync_off = h_sync_offset & 0xff; |
| dtd->part2.h_sync_width = h_sync_len & 0xff; |
| dtd->part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | |
| (v_sync_len & 0xf); |
| dtd->part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | |
| ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | |
| ((v_sync_len & 0x30) >> 4); |
| |
| dtd->part2.dtd_flags = 0x18; |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) |
| dtd->part2.dtd_flags |= DTD_FLAG_INTERLACE; |
| if (mode->flags & DRM_MODE_FLAG_PHSYNC) |
| dtd->part2.dtd_flags |= DTD_FLAG_HSYNC_POSITIVE; |
| if (mode->flags & DRM_MODE_FLAG_PVSYNC) |
| dtd->part2.dtd_flags |= DTD_FLAG_VSYNC_POSITIVE; |
| |
| dtd->part2.v_sync_off_high = v_sync_offset & 0xc0; |
| } |
| |
| static void intel_sdvo_get_mode_from_dtd(struct drm_display_mode *pmode, |
| const struct intel_sdvo_dtd *dtd) |
| { |
| struct drm_display_mode mode = {}; |
| |
| mode.hdisplay = dtd->part1.h_active; |
| mode.hdisplay += ((dtd->part1.h_high >> 4) & 0x0f) << 8; |
| mode.hsync_start = mode.hdisplay + dtd->part2.h_sync_off; |
| mode.hsync_start += (dtd->part2.sync_off_width_high & 0xc0) << 2; |
| mode.hsync_end = mode.hsync_start + dtd->part2.h_sync_width; |
| mode.hsync_end += (dtd->part2.sync_off_width_high & 0x30) << 4; |
| mode.htotal = mode.hdisplay + dtd->part1.h_blank; |
| mode.htotal += (dtd->part1.h_high & 0xf) << 8; |
| |
| mode.vdisplay = dtd->part1.v_active; |
| mode.vdisplay += ((dtd->part1.v_high >> 4) & 0x0f) << 8; |
| mode.vsync_start = mode.vdisplay; |
| mode.vsync_start += (dtd->part2.v_sync_off_width >> 4) & 0xf; |
| mode.vsync_start += (dtd->part2.sync_off_width_high & 0x0c) << 2; |
| mode.vsync_start += dtd->part2.v_sync_off_high & 0xc0; |
| mode.vsync_end = mode.vsync_start + |
| (dtd->part2.v_sync_off_width & 0xf); |
| mode.vsync_end += (dtd->part2.sync_off_width_high & 0x3) << 4; |
| mode.vtotal = mode.vdisplay + dtd->part1.v_blank; |
| mode.vtotal += (dtd->part1.v_high & 0xf) << 8; |
| |
| mode.clock = dtd->part1.clock * 10; |
| |
| if (dtd->part2.dtd_flags & DTD_FLAG_INTERLACE) |
| mode.flags |= DRM_MODE_FLAG_INTERLACE; |
| if (dtd->part2.dtd_flags & DTD_FLAG_HSYNC_POSITIVE) |
| mode.flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| mode.flags |= DRM_MODE_FLAG_NHSYNC; |
| if (dtd->part2.dtd_flags & DTD_FLAG_VSYNC_POSITIVE) |
| mode.flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| mode.flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| drm_mode_set_crtcinfo(&mode, 0); |
| |
| drm_mode_copy(pmode, &mode); |
| } |
| |
| static bool intel_sdvo_check_supp_encode(struct intel_sdvo *intel_sdvo) |
| { |
| struct intel_sdvo_encode encode; |
| |
| BUILD_BUG_ON(sizeof(encode) != 2); |
| return intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_SUPP_ENCODE, |
| &encode, sizeof(encode)); |
| } |
| |
| static bool intel_sdvo_set_encode(struct intel_sdvo *intel_sdvo, |
| uint8_t mode) |
| { |
| return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_ENCODE, &mode, 1); |
| } |
| |
| static bool intel_sdvo_set_colorimetry(struct intel_sdvo *intel_sdvo, |
| uint8_t mode) |
| { |
| return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_COLORIMETRY, &mode, 1); |
| } |
| |
| #if 0 |
| static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo) |
| { |
| int i, j; |
| uint8_t set_buf_index[2]; |
| uint8_t av_split; |
| uint8_t buf_size; |
| uint8_t buf[48]; |
| uint8_t *pos; |
| |
| intel_sdvo_get_value(encoder, SDVO_CMD_GET_HBUF_AV_SPLIT, &av_split, 1); |
| |
| for (i = 0; i <= av_split; i++) { |
| set_buf_index[0] = i; set_buf_index[1] = 0; |
| intel_sdvo_write_cmd(encoder, SDVO_CMD_SET_HBUF_INDEX, |
| set_buf_index, 2); |
| intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_INFO, NULL, 0); |
| intel_sdvo_read_response(encoder, &buf_size, 1); |
| |
| pos = buf; |
| for (j = 0; j <= buf_size; j += 8) { |
| intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_DATA, |
| NULL, 0); |
| intel_sdvo_read_response(encoder, pos, 8); |
| pos += 8; |
| } |
| } |
| } |
| #endif |
| |
| static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo, |
| unsigned if_index, uint8_t tx_rate, |
| const uint8_t *data, unsigned length) |
| { |
| uint8_t set_buf_index[2] = { if_index, 0 }; |
| uint8_t hbuf_size, tmp[8]; |
| int i; |
| |
| if (!intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_HBUF_INDEX, |
| set_buf_index, 2)) |
| return false; |
| |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO, |
| &hbuf_size, 1)) |
| return false; |
| |
| /* Buffer size is 0 based, hooray! */ |
| hbuf_size++; |
| |
| DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n", |
| if_index, length, hbuf_size); |
| |
| for (i = 0; i < hbuf_size; i += 8) { |
| memset(tmp, 0, 8); |
| if (i < length) |
| memcpy(tmp, data + i, min_t(unsigned, 8, length - i)); |
| |
| if (!intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_HBUF_DATA, |
| tmp, 8)) |
| return false; |
| } |
| |
| return intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_HBUF_TXRATE, |
| &tx_rate, 1); |
| } |
| |
| static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo, |
| struct intel_crtc_state *pipe_config) |
| { |
| uint8_t sdvo_data[HDMI_INFOFRAME_SIZE(AVI)]; |
| union hdmi_infoframe frame; |
| int ret; |
| ssize_t len; |
| |
| ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, |
| &pipe_config->base.adjusted_mode, |
| false); |
| if (ret < 0) { |
| DRM_ERROR("couldn't fill AVI infoframe\n"); |
| return false; |
| } |
| |
| if (intel_sdvo->rgb_quant_range_selectable) { |
| if (pipe_config->limited_color_range) |
| frame.avi.quantization_range = |
| HDMI_QUANTIZATION_RANGE_LIMITED; |
| else |
| frame.avi.quantization_range = |
| HDMI_QUANTIZATION_RANGE_FULL; |
| } |
| |
| len = hdmi_infoframe_pack(&frame, sdvo_data, sizeof(sdvo_data)); |
| if (len < 0) |
| return false; |
| |
| return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF, |
| SDVO_HBUF_TX_VSYNC, |
| sdvo_data, sizeof(sdvo_data)); |
| } |
| |
| static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo, |
| struct drm_connector_state *conn_state) |
| { |
| struct intel_sdvo_tv_format format; |
| uint32_t format_map; |
| |
| format_map = 1 << conn_state->tv.mode; |
| memset(&format, 0, sizeof(format)); |
| memcpy(&format, &format_map, min(sizeof(format), sizeof(format_map))); |
| |
| BUILD_BUG_ON(sizeof(format) != 6); |
| return intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_TV_FORMAT, |
| &format, sizeof(format)); |
| } |
| |
| static bool |
| intel_sdvo_set_output_timings_from_mode(struct intel_sdvo *intel_sdvo, |
| const struct drm_display_mode *mode) |
| { |
| struct intel_sdvo_dtd output_dtd; |
| |
| if (!intel_sdvo_set_target_output(intel_sdvo, |
| intel_sdvo->attached_output)) |
| return false; |
| |
| intel_sdvo_get_dtd_from_mode(&output_dtd, mode); |
| if (!intel_sdvo_set_output_timing(intel_sdvo, &output_dtd)) |
| return false; |
| |
| return true; |
| } |
| |
| /* Asks the sdvo controller for the preferred input mode given the output mode. |
| * Unfortunately we have to set up the full output mode to do that. */ |
| static bool |
| intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct intel_sdvo_dtd input_dtd; |
| |
| /* Reset the input timing to the screen. Assume always input 0. */ |
| if (!intel_sdvo_set_target_input(intel_sdvo)) |
| return false; |
| |
| if (!intel_sdvo_create_preferred_input_timing(intel_sdvo, |
| mode->clock / 10, |
| mode->hdisplay, |
| mode->vdisplay)) |
| return false; |
| |
| if (!intel_sdvo_get_preferred_input_timing(intel_sdvo, |
| &input_dtd)) |
| return false; |
| |
| intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); |
| intel_sdvo->dtd_sdvo_flags = input_dtd.part2.sdvo_flags; |
| |
| return true; |
| } |
| |
| static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc_state *pipe_config) |
| { |
| unsigned dotclock = pipe_config->port_clock; |
| struct dpll *clock = &pipe_config->dpll; |
| |
| /* SDVO TV has fixed PLL values depend on its clock range, |
| this mirrors vbios setting. */ |
| if (dotclock >= 100000 && dotclock < 140500) { |
| clock->p1 = 2; |
| clock->p2 = 10; |
| clock->n = 3; |
| clock->m1 = 16; |
| clock->m2 = 8; |
| } else if (dotclock >= 140500 && dotclock <= 200000) { |
| clock->p1 = 1; |
| clock->p2 = 10; |
| clock->n = 6; |
| clock->m1 = 12; |
| clock->m2 = 8; |
| } else { |
| WARN(1, "SDVO TV clock out of range: %i\n", dotclock); |
| } |
| |
| pipe_config->clock_set = true; |
| } |
| |
| static bool intel_sdvo_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); |
| struct intel_sdvo_connector_state *intel_sdvo_state = |
| to_intel_sdvo_connector_state(conn_state); |
| struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; |
| struct drm_display_mode *mode = &pipe_config->base.mode; |
| |
| DRM_DEBUG_KMS("forcing bpc to 8 for SDVO\n"); |
| pipe_config->pipe_bpp = 8*3; |
| |
| if (HAS_PCH_SPLIT(to_i915(encoder->base.dev))) |
| pipe_config->has_pch_encoder = true; |
| |
| /* We need to construct preferred input timings based on our |
| * output timings. To do that, we have to set the output |
| * timings, even though this isn't really the right place in |
| * the sequence to do it. Oh well. |
| */ |
| if (intel_sdvo->is_tv) { |
| if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo, mode)) |
| return false; |
| |
| (void) intel_sdvo_get_preferred_input_mode(intel_sdvo, |
| mode, |
| adjusted_mode); |
| pipe_config->sdvo_tv_clock = true; |
| } else if (intel_sdvo->is_lvds) { |
| if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo, |
| intel_sdvo->sdvo_lvds_fixed_mode)) |
| return false; |
| |
| (void) intel_sdvo_get_preferred_input_mode(intel_sdvo, |
| mode, |
| adjusted_mode); |
| } |
| |
| /* Make the CRTC code factor in the SDVO pixel multiplier. The |
| * SDVO device will factor out the multiplier during mode_set. |
| */ |
| pipe_config->pixel_multiplier = |
| intel_sdvo_get_pixel_multiplier(adjusted_mode); |
| |
| if (intel_sdvo_state->base.force_audio != HDMI_AUDIO_OFF_DVI) |
| pipe_config->has_hdmi_sink = intel_sdvo->has_hdmi_monitor; |
| |
| if (intel_sdvo_state->base.force_audio == HDMI_AUDIO_ON || |
| (intel_sdvo_state->base.force_audio == HDMI_AUDIO_AUTO && intel_sdvo->has_hdmi_audio)) |
| pipe_config->has_audio = true; |
| |
| if (intel_sdvo_state->base.broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) { |
| /* See CEA-861-E - 5.1 Default Encoding Parameters */ |
| /* FIXME: This bit is only valid when using TMDS encoding and 8 |
| * bit per color mode. */ |
| if (pipe_config->has_hdmi_sink && |
| drm_match_cea_mode(adjusted_mode) > 1) |
| pipe_config->limited_color_range = true; |
| } else { |
| if (pipe_config->has_hdmi_sink && |
| intel_sdvo_state->base.broadcast_rgb == INTEL_BROADCAST_RGB_LIMITED) |
| pipe_config->limited_color_range = true; |
| } |
| |
| /* Clock computation needs to happen after pixel multiplier. */ |
| if (intel_sdvo->is_tv) |
| i9xx_adjust_sdvo_tv_clock(pipe_config); |
| |
| /* Set user selected PAR to incoming mode's member */ |
| if (intel_sdvo->is_hdmi) |
| adjusted_mode->picture_aspect_ratio = conn_state->picture_aspect_ratio; |
| |
| return true; |
| } |
| |
| #define UPDATE_PROPERTY(input, NAME) \ |
| do { \ |
| val = input; \ |
| intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_##NAME, &val, sizeof(val)); \ |
| } while (0) |
| |
| static void intel_sdvo_update_props(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_connector_state *sdvo_state) |
| { |
| struct drm_connector_state *conn_state = &sdvo_state->base.base; |
| struct intel_sdvo_connector *intel_sdvo_conn = |
| to_intel_sdvo_connector(conn_state->connector); |
| uint16_t val; |
| |
| if (intel_sdvo_conn->left) |
| UPDATE_PROPERTY(sdvo_state->tv.overscan_h, OVERSCAN_H); |
| |
| if (intel_sdvo_conn->top) |
| UPDATE_PROPERTY(sdvo_state->tv.overscan_v, OVERSCAN_V); |
| |
| if (intel_sdvo_conn->hpos) |
| UPDATE_PROPERTY(sdvo_state->tv.hpos, HPOS); |
| |
| if (intel_sdvo_conn->vpos) |
| UPDATE_PROPERTY(sdvo_state->tv.vpos, VPOS); |
| |
| if (intel_sdvo_conn->saturation) |
| UPDATE_PROPERTY(conn_state->tv.saturation, SATURATION); |
| |
| if (intel_sdvo_conn->contrast) |
| UPDATE_PROPERTY(conn_state->tv.contrast, CONTRAST); |
| |
| if (intel_sdvo_conn->hue) |
| UPDATE_PROPERTY(conn_state->tv.hue, HUE); |
| |
| if (intel_sdvo_conn->brightness) |
| UPDATE_PROPERTY(conn_state->tv.brightness, BRIGHTNESS); |
| |
| if (intel_sdvo_conn->sharpness) |
| UPDATE_PROPERTY(sdvo_state->tv.sharpness, SHARPNESS); |
| |
| if (intel_sdvo_conn->flicker_filter) |
| UPDATE_PROPERTY(sdvo_state->tv.flicker_filter, FLICKER_FILTER); |
| |
| if (intel_sdvo_conn->flicker_filter_2d) |
| UPDATE_PROPERTY(sdvo_state->tv.flicker_filter_2d, FLICKER_FILTER_2D); |
| |
| if (intel_sdvo_conn->flicker_filter_adaptive) |
| UPDATE_PROPERTY(sdvo_state->tv.flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE); |
| |
| if (intel_sdvo_conn->tv_chroma_filter) |
| UPDATE_PROPERTY(sdvo_state->tv.chroma_filter, TV_CHROMA_FILTER); |
| |
| if (intel_sdvo_conn->tv_luma_filter) |
| UPDATE_PROPERTY(sdvo_state->tv.luma_filter, TV_LUMA_FILTER); |
| |
| if (intel_sdvo_conn->dot_crawl) |
| UPDATE_PROPERTY(sdvo_state->tv.dot_crawl, DOT_CRAWL); |
| |
| #undef UPDATE_PROPERTY |
| } |
| |
| static void intel_sdvo_pre_enable(struct intel_encoder *intel_encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); |
| const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode; |
| struct intel_sdvo_connector_state *sdvo_state = to_intel_sdvo_connector_state(conn_state); |
| struct drm_display_mode *mode = &crtc_state->base.mode; |
| struct intel_sdvo *intel_sdvo = to_sdvo(intel_encoder); |
| u32 sdvox; |
| struct intel_sdvo_in_out_map in_out; |
| struct intel_sdvo_dtd input_dtd, output_dtd; |
| int rate; |
| |
| intel_sdvo_update_props(intel_sdvo, sdvo_state); |
| |
| /* First, set the input mapping for the first input to our controlled |
| * output. This is only correct if we're a single-input device, in |
| * which case the first input is the output from the appropriate SDVO |
| * channel on the motherboard. In a two-input device, the first input |
| * will be SDVOB and the second SDVOC. |
| */ |
| in_out.in0 = intel_sdvo->attached_output; |
| in_out.in1 = 0; |
| |
| intel_sdvo_set_value(intel_sdvo, |
| SDVO_CMD_SET_IN_OUT_MAP, |
| &in_out, sizeof(in_out)); |
| |
| /* Set the output timings to the screen */ |
| if (!intel_sdvo_set_target_output(intel_sdvo, |
| intel_sdvo->attached_output)) |
| return; |
| |
| /* lvds has a special fixed output timing. */ |
| if (intel_sdvo->is_lvds) |
| intel_sdvo_get_dtd_from_mode(&output_dtd, |
| intel_sdvo->sdvo_lvds_fixed_mode); |
| else |
| intel_sdvo_get_dtd_from_mode(&output_dtd, mode); |
| if (!intel_sdvo_set_output_timing(intel_sdvo, &output_dtd)) |
| DRM_INFO("Setting output timings on %s failed\n", |
| SDVO_NAME(intel_sdvo)); |
| |
| /* Set the input timing to the screen. Assume always input 0. */ |
| if (!intel_sdvo_set_target_input(intel_sdvo)) |
| return; |
| |
| if (crtc_state->has_hdmi_sink) { |
| intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI); |
| intel_sdvo_set_colorimetry(intel_sdvo, |
| SDVO_COLORIMETRY_RGB256); |
| intel_sdvo_set_avi_infoframe(intel_sdvo, crtc_state); |
| } else |
| intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_DVI); |
| |
| if (intel_sdvo->is_tv && |
| !intel_sdvo_set_tv_format(intel_sdvo, conn_state)) |
| return; |
| |
| intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); |
| |
| if (intel_sdvo->is_tv || intel_sdvo->is_lvds) |
| input_dtd.part2.sdvo_flags = intel_sdvo->dtd_sdvo_flags; |
| if (!intel_sdvo_set_input_timing(intel_sdvo, &input_dtd)) |
| DRM_INFO("Setting input timings on %s failed\n", |
| SDVO_NAME(intel_sdvo)); |
| |
| switch (crtc_state->pixel_multiplier) { |
| default: |
| WARN(1, "unknown pixel multiplier specified\n"); |
| case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break; |
| case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break; |
| case 4: rate = SDVO_CLOCK_RATE_MULT_4X; break; |
| } |
| if (!intel_sdvo_set_clock_rate_mult(intel_sdvo, rate)) |
| return; |
| |
| /* Set the SDVO control regs. */ |
| if (INTEL_GEN(dev_priv) >= 4) { |
| /* The real mode polarity is set by the SDVO commands, using |
| * struct intel_sdvo_dtd. */ |
| sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH; |
| if (!HAS_PCH_SPLIT(dev_priv) && crtc_state->limited_color_range) |
| sdvox |= HDMI_COLOR_RANGE_16_235; |
| if (INTEL_GEN(dev_priv) < 5) |
| sdvox |= SDVO_BORDER_ENABLE; |
| } else { |
| sdvox = I915_READ(intel_sdvo->sdvo_reg); |
| if (intel_sdvo->port == PORT_B) |
| sdvox &= SDVOB_PRESERVE_MASK; |
| else |
| sdvox &= SDVOC_PRESERVE_MASK; |
| sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; |
| } |
| |
| if (HAS_PCH_CPT(dev_priv)) |
| sdvox |= SDVO_PIPE_SEL_CPT(crtc->pipe); |
| else |
| sdvox |= SDVO_PIPE_SEL(crtc->pipe); |
| |
| if (crtc_state->has_audio) { |
| WARN_ON_ONCE(INTEL_GEN(dev_priv) < 4); |
| sdvox |= SDVO_AUDIO_ENABLE; |
| } |
| |
| if (INTEL_GEN(dev_priv) >= 4) { |
| /* done in crtc_mode_set as the dpll_md reg must be written early */ |
| } else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) || |
| IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) { |
| /* done in crtc_mode_set as it lives inside the dpll register */ |
| } else { |
| sdvox |= (crtc_state->pixel_multiplier - 1) |
| << SDVO_PORT_MULTIPLY_SHIFT; |
| } |
| |
| if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL && |
| INTEL_GEN(dev_priv) < 5) |
| sdvox |= SDVO_STALL_SELECT; |
| intel_sdvo_write_sdvox(intel_sdvo, sdvox); |
| } |
| |
| static bool intel_sdvo_connector_get_hw_state(struct intel_connector *connector) |
| { |
| struct intel_sdvo_connector *intel_sdvo_connector = |
| to_intel_sdvo_connector(&connector->base); |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(&connector->base); |
| u16 active_outputs = 0; |
| |
| intel_sdvo_get_active_outputs(intel_sdvo, &active_outputs); |
| |
| if (active_outputs & intel_sdvo_connector->output_flag) |
| return true; |
| else |
| return false; |
| } |
| |
| static bool intel_sdvo_get_hw_state(struct intel_encoder *encoder, |
| enum pipe *pipe) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); |
| u16 active_outputs = 0; |
| u32 tmp; |
| |
| tmp = I915_READ(intel_sdvo->sdvo_reg); |
| intel_sdvo_get_active_outputs(intel_sdvo, &active_outputs); |
| |
| if (!(tmp & SDVO_ENABLE) && (active_outputs == 0)) |
| return false; |
| |
| if (HAS_PCH_CPT(dev_priv)) |
| *pipe = PORT_TO_PIPE_CPT(tmp); |
| else |
| *pipe = PORT_TO_PIPE(tmp); |
| |
| return true; |
| } |
| |
| static void intel_sdvo_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); |
| struct intel_sdvo_dtd dtd; |
| int encoder_pixel_multiplier = 0; |
| int dotclock; |
| u32 flags = 0, sdvox; |
| u8 val; |
| bool ret; |
| |
| sdvox = I915_READ(intel_sdvo->sdvo_reg); |
| |
| ret = intel_sdvo_get_input_timing(intel_sdvo, &dtd); |
| if (!ret) { |
| /* Some sdvo encoders are not spec compliant and don't |
| * implement the mandatory get_timings function. */ |
| DRM_DEBUG_DRIVER("failed to retrieve SDVO DTD\n"); |
| pipe_config->quirks |= PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS; |
| } else { |
| if (dtd.part2.dtd_flags & DTD_FLAG_HSYNC_POSITIVE) |
| flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NHSYNC; |
| |
| if (dtd.part2.dtd_flags & DTD_FLAG_VSYNC_POSITIVE) |
| flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NVSYNC; |
| } |
| |
| pipe_config->base.adjusted_mode.flags |= flags; |
| |
| /* |
| * pixel multiplier readout is tricky: Only on i915g/gm it is stored in |
| * the sdvo port register, on all other platforms it is part of the dpll |
| * state. Since the general pipe state readout happens before the |
| * encoder->get_config we so already have a valid pixel multplier on all |
| * other platfroms. |
| */ |
| if (IS_I915G(dev_priv) || IS_I915GM(dev_priv)) { |
| pipe_config->pixel_multiplier = |
| ((sdvox & SDVO_PORT_MULTIPLY_MASK) |
| >> SDVO_PORT_MULTIPLY_SHIFT) + 1; |
| } |
| |
| dotclock = pipe_config->port_clock; |
| |
| if (pipe_config->pixel_multiplier) |
| dotclock /= pipe_config->pixel_multiplier; |
| |
| pipe_config->base.adjusted_mode.crtc_clock = dotclock; |
| |
| /* Cross check the port pixel multiplier with the sdvo encoder state. */ |
| if (intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_CLOCK_RATE_MULT, |
| &val, 1)) { |
| switch (val) { |
| case SDVO_CLOCK_RATE_MULT_1X: |
| encoder_pixel_multiplier = 1; |
| break; |
| case SDVO_CLOCK_RATE_MULT_2X: |
| encoder_pixel_multiplier = 2; |
| break; |
| case SDVO_CLOCK_RATE_MULT_4X: |
| encoder_pixel_multiplier = 4; |
| break; |
| } |
| } |
| |
| if (sdvox & HDMI_COLOR_RANGE_16_235) |
| pipe_config->limited_color_range = true; |
| |
| if (sdvox & SDVO_AUDIO_ENABLE) |
| pipe_config->has_audio = true; |
| |
| if (intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ENCODE, |
| &val, 1)) { |
| if (val == SDVO_ENCODE_HDMI) |
| pipe_config->has_hdmi_sink = true; |
| } |
| |
| WARN(encoder_pixel_multiplier != pipe_config->pixel_multiplier, |
| "SDVO pixel multiplier mismatch, port: %i, encoder: %i\n", |
| pipe_config->pixel_multiplier, encoder_pixel_multiplier); |
| } |
| |
| static void intel_disable_sdvo(struct intel_encoder *encoder, |
| struct intel_crtc_state *old_crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); |
| struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
| u32 temp; |
| |
| intel_sdvo_set_active_outputs(intel_sdvo, 0); |
| if (0) |
| intel_sdvo_set_encoder_power_state(intel_sdvo, |
| DRM_MODE_DPMS_OFF); |
| |
| temp = I915_READ(intel_sdvo->sdvo_reg); |
| |
| temp &= ~SDVO_ENABLE; |
| intel_sdvo_write_sdvox(intel_sdvo, temp); |
| |
| /* |
| * HW workaround for IBX, we need to move the port |
| * to transcoder A after disabling it to allow the |
| * matching DP port to be enabled on transcoder A. |
| */ |
| if (HAS_PCH_IBX(dev_priv) && crtc->pipe == PIPE_B) { |
| /* |
| * We get CPU/PCH FIFO underruns on the other pipe when |
| * doing the workaround. Sweep them under the rug. |
| */ |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, false); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); |
| |
| temp &= ~SDVO_PIPE_B_SELECT; |
| temp |= SDVO_ENABLE; |
| intel_sdvo_write_sdvox(intel_sdvo, temp); |
| |
| temp &= ~SDVO_ENABLE; |
| intel_sdvo_write_sdvox(intel_sdvo, temp); |
| |
| intel_wait_for_vblank_if_active(dev_priv, PIPE_A); |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, true); |
| intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); |
| } |
| } |
| |
| static void pch_disable_sdvo(struct intel_encoder *encoder, |
| struct intel_crtc_state *old_crtc_state, |
| struct drm_connector_state *old_conn_state) |
| { |
| } |
| |
| static void pch_post_disable_sdvo(struct intel_encoder *encoder, |
| struct intel_crtc_state *old_crtc_state, |
| struct drm_connector_state *old_conn_state) |
| { |
| intel_disable_sdvo(encoder, old_crtc_state, old_conn_state); |
| } |
| |
| static void intel_enable_sdvo(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); |
| u32 temp; |
| bool input1, input2; |
| int i; |
| bool success; |
| |
| temp = I915_READ(intel_sdvo->sdvo_reg); |
| temp |= SDVO_ENABLE; |
| intel_sdvo_write_sdvox(intel_sdvo, temp); |
| |
| for (i = 0; i < 2; i++) |
| intel_wait_for_vblank(dev_priv, intel_crtc->pipe); |
| |
| success = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2); |
| /* Warn if the device reported failure to sync. |
| * A lot of SDVO devices fail to notify of sync, but it's |
| * a given it the status is a success, we succeeded. |
| */ |
| if (success && !input1) { |
| DRM_DEBUG_KMS("First %s output reported failure to " |
| "sync\n", SDVO_NAME(intel_sdvo)); |
| } |
| |
| if (0) |
| intel_sdvo_set_encoder_power_state(intel_sdvo, |
| DRM_MODE_DPMS_ON); |
| intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output); |
| } |
| |
| static enum drm_mode_status |
| intel_sdvo_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); |
| int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; |
| |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| return MODE_NO_DBLESCAN; |
| |
| if (intel_sdvo->pixel_clock_min > mode->clock) |
| return MODE_CLOCK_LOW; |
| |
| if (intel_sdvo->pixel_clock_max < mode->clock) |
| return MODE_CLOCK_HIGH; |
| |
| if (mode->clock > max_dotclk) |
| return MODE_CLOCK_HIGH; |
| |
| if (intel_sdvo->is_lvds) { |
| if (mode->hdisplay > intel_sdvo->sdvo_lvds_fixed_mode->hdisplay) |
| return MODE_PANEL; |
| |
| if (mode->vdisplay > intel_sdvo->sdvo_lvds_fixed_mode->vdisplay) |
| return MODE_PANEL; |
| } |
| |
| return MODE_OK; |
| } |
| |
| static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct intel_sdvo_caps *caps) |
| { |
| BUILD_BUG_ON(sizeof(*caps) != 8); |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_DEVICE_CAPS, |
| caps, sizeof(*caps))) |
| return false; |
| |
| DRM_DEBUG_KMS("SDVO capabilities:\n" |
| " vendor_id: %d\n" |
| " device_id: %d\n" |
| " device_rev_id: %d\n" |
| " sdvo_version_major: %d\n" |
| " sdvo_version_minor: %d\n" |
| " sdvo_inputs_mask: %d\n" |
| " smooth_scaling: %d\n" |
| " sharp_scaling: %d\n" |
| " up_scaling: %d\n" |
| " down_scaling: %d\n" |
| " stall_support: %d\n" |
| " output_flags: %d\n", |
| caps->vendor_id, |
| caps->device_id, |
| caps->device_rev_id, |
| caps->sdvo_version_major, |
| caps->sdvo_version_minor, |
| caps->sdvo_inputs_mask, |
| caps->smooth_scaling, |
| caps->sharp_scaling, |
| caps->up_scaling, |
| caps->down_scaling, |
| caps->stall_support, |
| caps->output_flags); |
| |
| return true; |
| } |
| |
| static uint16_t intel_sdvo_get_hotplug_support(struct intel_sdvo *intel_sdvo) |
| { |
| struct drm_i915_private *dev_priv = to_i915(intel_sdvo->base.base.dev); |
| uint16_t hotplug; |
| |
| if (!I915_HAS_HOTPLUG(dev_priv)) |
| return 0; |
| |
| /* HW Erratum: SDVO Hotplug is broken on all i945G chips, there's noise |
| * on the line. */ |
| if (IS_I945G(dev_priv) || IS_I945GM(dev_priv)) |
| return 0; |
| |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, |
| &hotplug, sizeof(hotplug))) |
| return 0; |
| |
| return hotplug; |
| } |
| |
| static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder) |
| { |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); |
| |
| intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, |
| &intel_sdvo->hotplug_active, 2); |
| } |
| |
| static bool |
| intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo) |
| { |
| /* Is there more than one type of output? */ |
| return hweight16(intel_sdvo->caps.output_flags) > 1; |
| } |
| |
| static struct edid * |
| intel_sdvo_get_edid(struct drm_connector *connector) |
| { |
| struct intel_sdvo *sdvo = intel_attached_sdvo(connector); |
| return drm_get_edid(connector, &sdvo->ddc); |
| } |
| |
| /* Mac mini hack -- use the same DDC as the analog connector */ |
| static struct edid * |
| intel_sdvo_get_analog_edid(struct drm_connector *connector) |
| { |
| struct drm_i915_private *dev_priv = to_i915(connector->dev); |
| |
| return drm_get_edid(connector, |
| intel_gmbus_get_adapter(dev_priv, |
| dev_priv->vbt.crt_ddc_pin)); |
| } |
| |
| static enum drm_connector_status |
| intel_sdvo_tmds_sink_detect(struct drm_connector *connector) |
| { |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); |
| enum drm_connector_status status; |
| struct edid *edid; |
| |
| edid = intel_sdvo_get_edid(connector); |
| |
| if (edid == NULL && intel_sdvo_multifunc_encoder(intel_sdvo)) { |
| u8 ddc, saved_ddc = intel_sdvo->ddc_bus; |
| |
| /* |
| * Don't use the 1 as the argument of DDC bus switch to get |
| * the EDID. It is used for SDVO SPD ROM. |
| */ |
| for (ddc = intel_sdvo->ddc_bus >> 1; ddc > 1; ddc >>= 1) { |
| intel_sdvo->ddc_bus = ddc; |
| edid = intel_sdvo_get_edid(connector); |
| if (edid) |
| break; |
| } |
| /* |
| * If we found the EDID on the other bus, |
| * assume that is the correct DDC bus. |
| */ |
| if (edid == NULL) |
| intel_sdvo->ddc_bus = saved_ddc; |
| } |
| |
| /* |
| * When there is no edid and no monitor is connected with VGA |
| * port, try to use the CRT ddc to read the EDID for DVI-connector. |
| */ |
| if (edid == NULL) |
| edid = intel_sdvo_get_analog_edid(connector); |
| |
| status = connector_status_unknown; |
| if (edid != NULL) { |
| /* DDC bus is shared, match EDID to connector type */ |
| if (edid->input & DRM_EDID_INPUT_DIGITAL) { |
| status = connector_status_connected; |
| if (intel_sdvo->is_hdmi) { |
| intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid); |
| intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid); |
| intel_sdvo->rgb_quant_range_selectable = |
| drm_rgb_quant_range_selectable(edid); |
| } |
| } else |
| status = connector_status_disconnected; |
| kfree(edid); |
| } |
| |
| return status; |
| } |
| |
| static bool |
| intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo, |
| struct edid *edid) |
| { |
| bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL); |
| bool connector_is_digital = !!IS_DIGITAL(sdvo); |
| |
| DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n", |
| connector_is_digital, monitor_is_digital); |
| return connector_is_digital == monitor_is_digital; |
| } |
| |
| static enum drm_connector_status |
| intel_sdvo_detect(struct drm_connector *connector, bool force) |
| { |
| uint16_t response; |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); |
| enum drm_connector_status ret; |
| |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
| connector->base.id, connector->name); |
| |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_ATTACHED_DISPLAYS, |
| &response, 2)) |
| return connector_status_unknown; |
| |
| DRM_DEBUG_KMS("SDVO response %d %d [%x]\n", |
| response & 0xff, response >> 8, |
| intel_sdvo_connector->output_flag); |
| |
| if (response == 0) |
| return connector_status_disconnected; |
| |
| intel_sdvo->attached_output = response; |
| |
| intel_sdvo->has_hdmi_monitor = false; |
| intel_sdvo->has_hdmi_audio = false; |
| intel_sdvo->rgb_quant_range_selectable = false; |
| |
| if ((intel_sdvo_connector->output_flag & response) == 0) |
| ret = connector_status_disconnected; |
| else if (IS_TMDS(intel_sdvo_connector)) |
| ret = intel_sdvo_tmds_sink_detect(connector); |
| else { |
| struct edid *edid; |
| |
| /* if we have an edid check it matches the connection */ |
| edid = intel_sdvo_get_edid(connector); |
| if (edid == NULL) |
| edid = intel_sdvo_get_analog_edid(connector); |
| if (edid != NULL) { |
| if (intel_sdvo_connector_matches_edid(intel_sdvo_connector, |
| edid)) |
| ret = connector_status_connected; |
| else |
| ret = connector_status_disconnected; |
| |
| kfree(edid); |
| } else |
| ret = connector_status_connected; |
| } |
| |
| /* May update encoder flag for like clock for SDVO TV, etc.*/ |
| if (ret == connector_status_connected) { |
| intel_sdvo->is_tv = false; |
| intel_sdvo->is_lvds = false; |
| |
| if (response & SDVO_TV_MASK) |
| intel_sdvo->is_tv = true; |
| if (response & SDVO_LVDS_MASK) |
| intel_sdvo->is_lvds = intel_sdvo->sdvo_lvds_fixed_mode != NULL; |
| } |
| |
| return ret; |
| } |
| |
| static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) |
| { |
| struct edid *edid; |
| |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
| connector->base.id, connector->name); |
| |
| /* set the bus switch and get the modes */ |
| edid = intel_sdvo_get_edid(connector); |
| |
| /* |
| * Mac mini hack. On this device, the DVI-I connector shares one DDC |
| * link between analog and digital outputs. So, if the regular SDVO |
| * DDC fails, check to see if the analog output is disconnected, in |
| * which case we'll look there for the digital DDC data. |
| */ |
| if (edid == NULL) |
| edid = intel_sdvo_get_analog_edid(connector); |
| |
| if (edid != NULL) { |
| if (intel_sdvo_connector_matches_edid(to_intel_sdvo_connector(connector), |
| edid)) { |
| drm_mode_connector_update_edid_property(connector, edid); |
| drm_add_edid_modes(connector, edid); |
| } |
| |
| kfree(edid); |
| } |
| } |
| |
| /* |
| * Set of SDVO TV modes. |
| * Note! This is in reply order (see loop in get_tv_modes). |
| * XXX: all 60Hz refresh? |
| */ |
| static const struct drm_display_mode sdvo_tv_modes[] = { |
| { DRM_MODE("320x200", DRM_MODE_TYPE_DRIVER, 5815, 320, 321, 384, |
| 416, 0, 200, 201, 232, 233, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("320x240", DRM_MODE_TYPE_DRIVER, 6814, 320, 321, 384, |
| 416, 0, 240, 241, 272, 273, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("400x300", DRM_MODE_TYPE_DRIVER, 9910, 400, 401, 464, |
| 496, 0, 300, 301, 332, 333, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 16913, 640, 641, 704, |
| 736, 0, 350, 351, 382, 383, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121, 640, 641, 704, |
| 736, 0, 400, 401, 432, 433, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 22654, 640, 641, 704, |
| 736, 0, 480, 481, 512, 513, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("704x480", DRM_MODE_TYPE_DRIVER, 24624, 704, 705, 768, |
| 800, 0, 480, 481, 512, 513, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("704x576", DRM_MODE_TYPE_DRIVER, 29232, 704, 705, 768, |
| 800, 0, 576, 577, 608, 609, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("720x350", DRM_MODE_TYPE_DRIVER, 18751, 720, 721, 784, |
| 816, 0, 350, 351, 382, 383, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 21199, 720, 721, 784, |
| 816, 0, 400, 401, 432, 433, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 25116, 720, 721, 784, |
| 816, 0, 480, 481, 512, 513, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("720x540", DRM_MODE_TYPE_DRIVER, 28054, 720, 721, 784, |
| 816, 0, 540, 541, 572, 573, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 29816, 720, 721, 784, |
| 816, 0, 576, 577, 608, 609, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("768x576", DRM_MODE_TYPE_DRIVER, 31570, 768, 769, 832, |
| 864, 0, 576, 577, 608, 609, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 34030, 800, 801, 864, |
| 896, 0, 600, 601, 632, 633, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 36581, 832, 833, 896, |
| 928, 0, 624, 625, 656, 657, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("920x766", DRM_MODE_TYPE_DRIVER, 48707, 920, 921, 984, |
| 1016, 0, 766, 767, 798, 799, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 53827, 1024, 1025, 1088, |
| 1120, 0, 768, 769, 800, 801, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 87265, 1280, 1281, 1344, |
| 1376, 0, 1024, 1025, 1056, 1057, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| }; |
| |
| static void intel_sdvo_get_tv_modes(struct drm_connector *connector) |
| { |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); |
| const struct drm_connector_state *conn_state = connector->state; |
| struct intel_sdvo_sdtv_resolution_request tv_res; |
| uint32_t reply = 0, format_map = 0; |
| int i; |
| |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
| connector->base.id, connector->name); |
| |
| /* Read the list of supported input resolutions for the selected TV |
| * format. |
| */ |
| format_map = 1 << conn_state->tv.mode; |
| memcpy(&tv_res, &format_map, |
| min(sizeof(format_map), sizeof(struct intel_sdvo_sdtv_resolution_request))); |
| |
| if (!intel_sdvo_set_target_output(intel_sdvo, intel_sdvo->attached_output)) |
| return; |
| |
| BUILD_BUG_ON(sizeof(tv_res) != 3); |
| if (!intel_sdvo_write_cmd(intel_sdvo, |
| SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT, |
| &tv_res, sizeof(tv_res))) |
| return; |
| if (!intel_sdvo_read_response(intel_sdvo, &reply, 3)) |
| return; |
| |
| for (i = 0; i < ARRAY_SIZE(sdvo_tv_modes); i++) |
| if (reply & (1 << i)) { |
| struct drm_display_mode *nmode; |
| nmode = drm_mode_duplicate(connector->dev, |
| &sdvo_tv_modes[i]); |
| if (nmode) |
| drm_mode_probed_add(connector, nmode); |
| } |
| } |
| |
| static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) |
| { |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); |
| struct drm_i915_private *dev_priv = to_i915(connector->dev); |
| struct drm_display_mode *newmode; |
| |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", |
| connector->base.id, connector->name); |
| |
| /* |
| * Fetch modes from VBT. For SDVO prefer the VBT mode since some |
| * SDVO->LVDS transcoders can't cope with the EDID mode. |
| */ |
| if (dev_priv->vbt.sdvo_lvds_vbt_mode != NULL) { |
| newmode = drm_mode_duplicate(connector->dev, |
| dev_priv->vbt.sdvo_lvds_vbt_mode); |
| if (newmode != NULL) { |
| /* Guarantee the mode is preferred */ |
| newmode->type = (DRM_MODE_TYPE_PREFERRED | |
| DRM_MODE_TYPE_DRIVER); |
| drm_mode_probed_add(connector, newmode); |
| } |
| } |
| |
| /* |
| * Attempt to get the mode list from DDC. |
| * Assume that the preferred modes are |
| * arranged in priority order. |
| */ |
| intel_ddc_get_modes(connector, &intel_sdvo->ddc); |
| |
| list_for_each_entry(newmode, &connector->probed_modes, head) { |
| if (newmode->type & DRM_MODE_TYPE_PREFERRED) { |
| intel_sdvo->sdvo_lvds_fixed_mode = |
| drm_mode_duplicate(connector->dev, newmode); |
| |
| intel_sdvo->is_lvds = true; |
| break; |
| } |
| } |
| } |
| |
| static int intel_sdvo_get_modes(struct drm_connector *connector) |
| { |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); |
| |
| if (IS_TV(intel_sdvo_connector)) |
| intel_sdvo_get_tv_modes(connector); |
| else if (IS_LVDS(intel_sdvo_connector)) |
| intel_sdvo_get_lvds_modes(connector); |
| else |
| intel_sdvo_get_ddc_modes(connector); |
| |
| return !list_empty(&connector->probed_modes); |
| } |
| |
| static void intel_sdvo_destroy(struct drm_connector *connector) |
| { |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); |
| |
| drm_connector_cleanup(connector); |
| kfree(intel_sdvo_connector); |
| } |
| |
| static int |
| intel_sdvo_connector_atomic_get_property(struct drm_connector *connector, |
| const struct drm_connector_state *state, |
| struct drm_property *property, |
| uint64_t *val) |
| { |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); |
| const struct intel_sdvo_connector_state *sdvo_state = to_intel_sdvo_connector_state((void *)state); |
| |
| if (property == intel_sdvo_connector->tv_format) { |
| int i; |
| |
| for (i = 0; i < intel_sdvo_connector->format_supported_num; i++) |
| if (state->tv.mode == intel_sdvo_connector->tv_format_supported[i]) { |
| *val = i; |
| |
| return 0; |
| } |
| |
| WARN_ON(1); |
| *val = 0; |
| } else if (property == intel_sdvo_connector->top || |
| property == intel_sdvo_connector->bottom) |
| *val = intel_sdvo_connector->max_vscan - sdvo_state->tv.overscan_v; |
| else if (property == intel_sdvo_connector->left || |
| property == intel_sdvo_connector->right) |
| *val = intel_sdvo_connector->max_hscan - sdvo_state->tv.overscan_h; |
| else if (property == intel_sdvo_connector->hpos) |
| *val = sdvo_state->tv.hpos; |
| else if (property == intel_sdvo_connector->vpos) |
| *val = sdvo_state->tv.vpos; |
| else if (property == intel_sdvo_connector->saturation) |
| *val = state->tv.saturation; |
| else if (property == intel_sdvo_connector->contrast) |
| *val = state->tv.contrast; |
| else if (property == intel_sdvo_connector->hue) |
| *val = state->tv.hue; |
| else if (property == intel_sdvo_connector->brightness) |
| *val = state->tv.brightness; |
| else if (property == intel_sdvo_connector->sharpness) |
| *val = sdvo_state->tv.sharpness; |
| else if (property == intel_sdvo_connector->flicker_filter) |
| *val = sdvo_state->tv.flicker_filter; |
| else if (property == intel_sdvo_connector->flicker_filter_2d) |
| *val = sdvo_state->tv.flicker_filter_2d; |
| else if (property == intel_sdvo_connector->flicker_filter_adaptive) |
| *val = sdvo_state->tv.flicker_filter_adaptive; |
| else if (property == intel_sdvo_connector->tv_chroma_filter) |
| *val = sdvo_state->tv.chroma_filter; |
| else if (property == intel_sdvo_connector->tv_luma_filter) |
| *val = sdvo_state->tv.luma_filter; |
| else if (property == intel_sdvo_connector->dot_crawl) |
| *val = sdvo_state->tv.dot_crawl; |
| else |
| return intel_digital_connector_atomic_get_property(connector, state, property, val); |
| |
| return 0; |
| } |
| |
| static int |
| intel_sdvo_connector_atomic_set_property(struct drm_connector *connector, |
| struct drm_connector_state *state, |
| struct drm_property *property, |
| uint64_t val) |
| { |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); |
| struct intel_sdvo_connector_state *sdvo_state = to_intel_sdvo_connector_state(state); |
| |
| if (property == intel_sdvo_connector->tv_format) { |
| state->tv.mode = intel_sdvo_connector->tv_format_supported[val]; |
| |
| if (state->crtc) { |
| struct drm_crtc_state *crtc_state = |
| drm_atomic_get_new_crtc_state(state->state, state->crtc); |
| |
| crtc_state->connectors_changed = true; |
| } |
| } else if (property == intel_sdvo_connector->top || |
| property == intel_sdvo_connector->bottom) |
| /* Cannot set these independent from each other */ |
| sdvo_state->tv.overscan_v = intel_sdvo_connector->max_vscan - val; |
| else if (property == intel_sdvo_connector->left || |
| property == intel_sdvo_connector->right) |
| /* Cannot set these independent from each other */ |
| sdvo_state->tv.overscan_h = intel_sdvo_connector->max_hscan - val; |
| else if (property == intel_sdvo_connector->hpos) |
| sdvo_state->tv.hpos = val; |
| else if (property == intel_sdvo_connector->vpos) |
| sdvo_state->tv.vpos = val; |
| else if (property == intel_sdvo_connector->saturation) |
| state->tv.saturation = val; |
| else if (property == intel_sdvo_connector->contrast) |
| state->tv.contrast = val; |
| else if (property == intel_sdvo_connector->hue) |
| state->tv.hue = val; |
| else if (property == intel_sdvo_connector->brightness) |
| state->tv.brightness = val; |
| else if (property == intel_sdvo_connector->sharpness) |
| sdvo_state->tv.sharpness = val; |
| else if (property == intel_sdvo_connector->flicker_filter) |
| sdvo_state->tv.flicker_filter = val; |
| else if (property == intel_sdvo_connector->flicker_filter_2d) |
| sdvo_state->tv.flicker_filter_2d = val; |
| else if (property == intel_sdvo_connector->flicker_filter_adaptive) |
| sdvo_state->tv.flicker_filter_adaptive = val; |
| else if (property == intel_sdvo_connector->tv_chroma_filter) |
| sdvo_state->tv.chroma_filter = val; |
| else if (property == intel_sdvo_connector->tv_luma_filter) |
| sdvo_state->tv.luma_filter = val; |
| else if (property == intel_sdvo_connector->dot_crawl) |
| sdvo_state->tv.dot_crawl = val; |
| else |
| return intel_digital_connector_atomic_set_property(connector, state, property, val); |
| |
| return 0; |
| } |
| |
| static int |
| intel_sdvo_connector_register(struct drm_connector *connector) |
| { |
| struct intel_sdvo *sdvo = intel_attached_sdvo(connector); |
| int ret; |
| |
| ret = intel_connector_register(connector); |
| if (ret) |
| return ret; |
| |
| return sysfs_create_link(&connector->kdev->kobj, |
| &sdvo->ddc.dev.kobj, |
| sdvo->ddc.dev.kobj.name); |
| } |
| |
| static void |
| intel_sdvo_connector_unregister(struct drm_connector *connector) |
| { |
| struct intel_sdvo *sdvo = intel_attached_sdvo(connector); |
| |
| sysfs_remove_link(&connector->kdev->kobj, |
| sdvo->ddc.dev.kobj.name); |
| intel_connector_unregister(connector); |
| } |
| |
| static struct drm_connector_state * |
| intel_sdvo_connector_duplicate_state(struct drm_connector *connector) |
| { |
| struct intel_sdvo_connector_state *state; |
| |
| state = kmemdup(connector->state, sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return NULL; |
| |
| __drm_atomic_helper_connector_duplicate_state(connector, &state->base.base); |
| return &state->base.base; |
| } |
| |
| static const struct drm_connector_funcs intel_sdvo_connector_funcs = { |
| .detect = intel_sdvo_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .atomic_get_property = intel_sdvo_connector_atomic_get_property, |
| .atomic_set_property = intel_sdvo_connector_atomic_set_property, |
| .late_register = intel_sdvo_connector_register, |
| .early_unregister = intel_sdvo_connector_unregister, |
| .destroy = intel_sdvo_destroy, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| .atomic_duplicate_state = intel_sdvo_connector_duplicate_state, |
| }; |
| |
| static int intel_sdvo_atomic_check(struct drm_connector *conn, |
| struct drm_connector_state *new_conn_state) |
| { |
| struct drm_atomic_state *state = new_conn_state->state; |
| struct drm_connector_state *old_conn_state = |
| drm_atomic_get_old_connector_state(state, conn); |
| struct intel_sdvo_connector_state *old_state = |
| to_intel_sdvo_connector_state(old_conn_state); |
| struct intel_sdvo_connector_state *new_state = |
| to_intel_sdvo_connector_state(new_conn_state); |
| |
| if (new_conn_state->crtc && |
| (memcmp(&old_state->tv, &new_state->tv, sizeof(old_state->tv)) || |
| memcmp(&old_conn_state->tv, &new_conn_state->tv, sizeof(old_conn_state->tv)))) { |
| struct drm_crtc_state *crtc_state = |
| drm_atomic_get_new_crtc_state(new_conn_state->state, |
| new_conn_state->crtc); |
| |
| crtc_state->connectors_changed = true; |
| } |
| |
| return intel_digital_connector_atomic_check(conn, new_conn_state); |
| } |
| |
| static const struct drm_connector_helper_funcs intel_sdvo_connector_helper_funcs = { |
| .get_modes = intel_sdvo_get_modes, |
| .mode_valid = intel_sdvo_mode_valid, |
| .atomic_check = intel_sdvo_atomic_check, |
| }; |
| |
| static void intel_sdvo_enc_destroy(struct drm_encoder *encoder) |
| { |
| struct intel_sdvo *intel_sdvo = to_sdvo(to_intel_encoder(encoder)); |
| |
| if (intel_sdvo->sdvo_lvds_fixed_mode != NULL) |
| drm_mode_destroy(encoder->dev, |
| intel_sdvo->sdvo_lvds_fixed_mode); |
| |
| i2c_del_adapter(&intel_sdvo->ddc); |
| intel_encoder_destroy(encoder); |
| } |
| |
| static const struct drm_encoder_funcs intel_sdvo_enc_funcs = { |
| .destroy = intel_sdvo_enc_destroy, |
| }; |
| |
| static void |
| intel_sdvo_guess_ddc_bus(struct intel_sdvo *sdvo) |
| { |
| uint16_t mask = 0; |
| unsigned int num_bits; |
| |
| /* Make a mask of outputs less than or equal to our own priority in the |
| * list. |
| */ |
| switch (sdvo->controlled_output) { |
| case SDVO_OUTPUT_LVDS1: |
| mask |= SDVO_OUTPUT_LVDS1; |
| case SDVO_OUTPUT_LVDS0: |
| mask |= SDVO_OUTPUT_LVDS0; |
| case SDVO_OUTPUT_TMDS1: |
| mask |= SDVO_OUTPUT_TMDS1; |
| case SDVO_OUTPUT_TMDS0: |
| mask |= SDVO_OUTPUT_TMDS0; |
| case SDVO_OUTPUT_RGB1: |
| mask |= SDVO_OUTPUT_RGB1; |
| case SDVO_OUTPUT_RGB0: |
| mask |= SDVO_OUTPUT_RGB0; |
| break; |
| } |
| |
| /* Count bits to find what number we are in the priority list. */ |
| mask &= sdvo->caps.output_flags; |
| num_bits = hweight16(mask); |
| /* If more than 3 outputs, default to DDC bus 3 for now. */ |
| if (num_bits > 3) |
| num_bits = 3; |
| |
| /* Corresponds to SDVO_CONTROL_BUS_DDCx */ |
| sdvo->ddc_bus = 1 << num_bits; |
| } |
| |
| /** |
| * Choose the appropriate DDC bus for control bus switch command for this |
| * SDVO output based on the controlled output. |
| * |
| * DDC bus number assignment is in a priority order of RGB outputs, then TMDS |
| * outputs, then LVDS outputs. |
| */ |
| static void |
| intel_sdvo_select_ddc_bus(struct drm_i915_private *dev_priv, |
| struct intel_sdvo *sdvo) |
| { |
| struct sdvo_device_mapping *mapping; |
| |
| if (sdvo->port == PORT_B) |
| mapping = &dev_priv->vbt.sdvo_mappings[0]; |
| else |
| mapping = &dev_priv->vbt.sdvo_mappings[1]; |
| |
| if (mapping->initialized) |
| sdvo->ddc_bus = 1 << ((mapping->ddc_pin & 0xf0) >> 4); |
| else |
| intel_sdvo_guess_ddc_bus(sdvo); |
| } |
| |
| static void |
| intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv, |
| struct intel_sdvo *sdvo) |
| { |
| struct sdvo_device_mapping *mapping; |
| u8 pin; |
| |
| if (sdvo->port == PORT_B) |
| mapping = &dev_priv->vbt.sdvo_mappings[0]; |
| else |
| mapping = &dev_priv->vbt.sdvo_mappings[1]; |
| |
| if (mapping->initialized && |
| intel_gmbus_is_valid_pin(dev_priv, mapping->i2c_pin)) |
| pin = mapping->i2c_pin; |
| else |
| pin = GMBUS_PIN_DPB; |
| |
| sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin); |
| |
| /* With gmbus we should be able to drive sdvo i2c at 2MHz, but somehow |
| * our code totally fails once we start using gmbus. Hence fall back to |
| * bit banging for now. */ |
| intel_gmbus_force_bit(sdvo->i2c, true); |
| } |
| |
| /* undo any changes intel_sdvo_select_i2c_bus() did to sdvo->i2c */ |
| static void |
| intel_sdvo_unselect_i2c_bus(struct intel_sdvo *sdvo) |
| { |
| intel_gmbus_force_bit(sdvo->i2c, false); |
| } |
| |
| static bool |
| intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo, int device) |
| { |
| return intel_sdvo_check_supp_encode(intel_sdvo); |
| } |
| |
| static u8 |
| intel_sdvo_get_slave_addr(struct drm_i915_private *dev_priv, |
| struct intel_sdvo *sdvo) |
| { |
| struct sdvo_device_mapping *my_mapping, *other_mapping; |
| |
| if (sdvo->port == PORT_B) { |
| my_mapping = &dev_priv->vbt.sdvo_mappings[0]; |
| other_mapping = &dev_priv->vbt.sdvo_mappings[1]; |
| } else { |
| my_mapping = &dev_priv->vbt.sdvo_mappings[1]; |
| other_mapping = &dev_priv->vbt.sdvo_mappings[0]; |
| } |
| |
| /* If the BIOS described our SDVO device, take advantage of it. */ |
| if (my_mapping->slave_addr) |
| return my_mapping->slave_addr; |
| |
| /* If the BIOS only described a different SDVO device, use the |
| * address that it isn't using. |
| */ |
| if (other_mapping->slave_addr) { |
| if (other_mapping->slave_addr == 0x70) |
| return 0x72; |
| else |
| return 0x70; |
| } |
| |
| /* No SDVO device info is found for another DVO port, |
| * so use mapping assumption we had before BIOS parsing. |
| */ |
| if (sdvo->port == PORT_B) |
| return 0x70; |
| else |
| return 0x72; |
| } |
| |
| static int |
| intel_sdvo_connector_init(struct intel_sdvo_connector *connector, |
| struct intel_sdvo *encoder) |
| { |
| struct drm_connector *drm_connector; |
| int ret; |
| |
| drm_connector = &connector->base.base; |
| ret = drm_connector_init(encoder->base.base.dev, |
| drm_connector, |
| &intel_sdvo_connector_funcs, |
| connector->base.base.connector_type); |
| if (ret < 0) |
| return ret; |
| |
| drm_connector_helper_add(drm_connector, |
| &intel_sdvo_connector_helper_funcs); |
| |
| connector->base.base.interlace_allowed = 1; |
| connector->base.base.doublescan_allowed = 0; |
| connector->base.base.display_info.subpixel_order = SubPixelHorizontalRGB; |
| connector->base.get_hw_state = intel_sdvo_connector_get_hw_state; |
| |
| intel_connector_attach_encoder(&connector->base, &encoder->base); |
| |
| return 0; |
| } |
| |
| static void |
| intel_sdvo_add_hdmi_properties(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_connector *connector) |
| { |
| struct drm_i915_private *dev_priv = to_i915(connector->base.base.dev); |
| |
| intel_attach_force_audio_property(&connector->base.base); |
| if (INTEL_GEN(dev_priv) >= 4 && IS_MOBILE(dev_priv)) { |
| intel_attach_broadcast_rgb_property(&connector->base.base); |
| } |
| intel_attach_aspect_ratio_property(&connector->base.base); |
| connector->base.base.state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE; |
| } |
| |
| static struct intel_sdvo_connector *intel_sdvo_connector_alloc(void) |
| { |
| struct intel_sdvo_connector *sdvo_connector; |
| struct intel_sdvo_connector_state *conn_state; |
| |
| sdvo_connector = kzalloc(sizeof(*sdvo_connector), GFP_KERNEL); |
| if (!sdvo_connector) |
| return NULL; |
| |
| conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL); |
| if (!conn_state) { |
| kfree(sdvo_connector); |
| return NULL; |
| } |
| |
| __drm_atomic_helper_connector_reset(&sdvo_connector->base.base, |
| &conn_state->base.base); |
| |
| return sdvo_connector; |
| } |
| |
| static bool |
| intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) |
| { |
| struct drm_encoder *encoder = &intel_sdvo->base.base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->dev); |
| struct drm_connector *connector; |
| struct intel_encoder *intel_encoder = to_intel_encoder(encoder); |
| struct intel_connector *intel_connector; |
| struct intel_sdvo_connector *intel_sdvo_connector; |
| |
| DRM_DEBUG_KMS("initialising DVI device %d\n", device); |
| |
| intel_sdvo_connector = intel_sdvo_connector_alloc(); |
| if (!intel_sdvo_connector) |
| return false; |
| |
| if (device == 0) { |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS0; |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS0; |
| } else if (device == 1) { |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS1; |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS1; |
| } |
| |
| intel_connector = &intel_sdvo_connector->base; |
| connector = &intel_connector->base; |
| if (intel_sdvo_get_hotplug_support(intel_sdvo) & |
| intel_sdvo_connector->output_flag) { |
| intel_sdvo->hotplug_active |= intel_sdvo_connector->output_flag; |
| /* Some SDVO devices have one-shot hotplug interrupts. |
| * Ensure that they get re-enabled when an interrupt happens. |
| */ |
| intel_encoder->hot_plug = intel_sdvo_enable_hotplug; |
| intel_sdvo_enable_hotplug(intel_encoder); |
| } else { |
| intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; |
| } |
| encoder->encoder_type = DRM_MODE_ENCODER_TMDS; |
| connector->connector_type = DRM_MODE_CONNECTOR_DVID; |
| |
| /* gen3 doesn't do the hdmi bits in the SDVO register */ |
| if (INTEL_GEN(dev_priv) >= 4 && |
| intel_sdvo_is_hdmi_connector(intel_sdvo, device)) { |
| connector->connector_type = DRM_MODE_CONNECTOR_HDMIA; |
| intel_sdvo->is_hdmi = true; |
| } |
| |
| if (intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo) < 0) { |
| kfree(intel_sdvo_connector); |
| return false; |
| } |
| |
| if (intel_sdvo->is_hdmi) |
| intel_sdvo_add_hdmi_properties(intel_sdvo, intel_sdvo_connector); |
| |
| return true; |
| } |
| |
| static bool |
| intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type) |
| { |
| struct drm_encoder *encoder = &intel_sdvo->base.base; |
| struct drm_connector *connector; |
| struct intel_connector *intel_connector; |
| struct intel_sdvo_connector *intel_sdvo_connector; |
| |
| DRM_DEBUG_KMS("initialising TV type %d\n", type); |
| |
| intel_sdvo_connector = intel_sdvo_connector_alloc(); |
| if (!intel_sdvo_connector) |
| return false; |
| |
| intel_connector = &intel_sdvo_connector->base; |
| connector = &intel_connector->base; |
| encoder->encoder_type = DRM_MODE_ENCODER_TVDAC; |
| connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO; |
| |
| intel_sdvo->controlled_output |= type; |
| intel_sdvo_connector->output_flag = type; |
| |
| intel_sdvo->is_tv = true; |
| |
| if (intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo) < 0) { |
| kfree(intel_sdvo_connector); |
| return false; |
| } |
| |
| if (!intel_sdvo_tv_create_property(intel_sdvo, intel_sdvo_connector, type)) |
| goto err; |
| |
| if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector)) |
| goto err; |
| |
| return true; |
| |
| err: |
| intel_sdvo_destroy(connector); |
| return false; |
| } |
| |
| static bool |
| intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device) |
| { |
| struct drm_encoder *encoder = &intel_sdvo->base.base; |
| struct drm_connector *connector; |
| struct intel_connector *intel_connector; |
| struct intel_sdvo_connector *intel_sdvo_connector; |
| |
| DRM_DEBUG_KMS("initialising analog device %d\n", device); |
| |
| intel_sdvo_connector = intel_sdvo_connector_alloc(); |
| if (!intel_sdvo_connector) |
| return false; |
| |
| intel_connector = &intel_sdvo_connector->base; |
| connector = &intel_connector->base; |
| intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT; |
| encoder->encoder_type = DRM_MODE_ENCODER_DAC; |
| connector->connector_type = DRM_MODE_CONNECTOR_VGA; |
| |
| if (device == 0) { |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB0; |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB0; |
| } else if (device == 1) { |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB1; |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1; |
| } |
| |
| if (intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo) < 0) { |
| kfree(intel_sdvo_connector); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool |
| intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device) |
| { |
| struct drm_encoder *encoder = &intel_sdvo->base.base; |
| struct drm_connector *connector; |
| struct intel_connector *intel_connector; |
| struct intel_sdvo_connector *intel_sdvo_connector; |
| |
| DRM_DEBUG_KMS("initialising LVDS device %d\n", device); |
| |
| intel_sdvo_connector = intel_sdvo_connector_alloc(); |
| if (!intel_sdvo_connector) |
| return false; |
| |
| intel_connector = &intel_sdvo_connector->base; |
| connector = &intel_connector->base; |
| encoder->encoder_type = DRM_MODE_ENCODER_LVDS; |
| connector->connector_type = DRM_MODE_CONNECTOR_LVDS; |
| |
| if (device == 0) { |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS0; |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS0; |
| } else if (device == 1) { |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS1; |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1; |
| } |
| |
| if (intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo) < 0) { |
| kfree(intel_sdvo_connector); |
| return false; |
| } |
| |
| if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector)) |
| goto err; |
| |
| return true; |
| |
| err: |
| intel_sdvo_destroy(connector); |
| return false; |
| } |
| |
| static bool |
| intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags) |
| { |
| intel_sdvo->is_tv = false; |
| intel_sdvo->is_lvds = false; |
| |
| /* SDVO requires XXX1 function may not exist unless it has XXX0 function.*/ |
| |
| if (flags & SDVO_OUTPUT_TMDS0) |
| if (!intel_sdvo_dvi_init(intel_sdvo, 0)) |
| return false; |
| |
| if ((flags & SDVO_TMDS_MASK) == SDVO_TMDS_MASK) |
| if (!intel_sdvo_dvi_init(intel_sdvo, 1)) |
| return false; |
| |
| /* TV has no XXX1 function block */ |
| if (flags & SDVO_OUTPUT_SVID0) |
| if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_SVID0)) |
| return false; |
| |
| if (flags & SDVO_OUTPUT_CVBS0) |
| if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_CVBS0)) |
| return false; |
| |
| if (flags & SDVO_OUTPUT_YPRPB0) |
| if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_YPRPB0)) |
| return false; |
| |
| if (flags & SDVO_OUTPUT_RGB0) |
| if (!intel_sdvo_analog_init(intel_sdvo, 0)) |
| return false; |
| |
| if ((flags & SDVO_RGB_MASK) == SDVO_RGB_MASK) |
| if (!intel_sdvo_analog_init(intel_sdvo, 1)) |
| return false; |
| |
| if (flags & SDVO_OUTPUT_LVDS0) |
| if (!intel_sdvo_lvds_init(intel_sdvo, 0)) |
| return false; |
| |
| if ((flags & SDVO_LVDS_MASK) == SDVO_LVDS_MASK) |
| if (!intel_sdvo_lvds_init(intel_sdvo, 1)) |
| return false; |
| |
| if ((flags & SDVO_OUTPUT_MASK) == 0) { |
| unsigned char bytes[2]; |
| |
| intel_sdvo->controlled_output = 0; |
| memcpy(bytes, &intel_sdvo->caps.output_flags, 2); |
| DRM_DEBUG_KMS("%s: Unknown SDVO output type (0x%02x%02x)\n", |
| SDVO_NAME(intel_sdvo), |
| bytes[0], bytes[1]); |
| return false; |
| } |
| intel_sdvo->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); |
| |
| return true; |
| } |
| |
| static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo) |
| { |
| struct drm_device *dev = intel_sdvo->base.base.dev; |
| struct drm_connector *connector, *tmp; |
| |
| list_for_each_entry_safe(connector, tmp, |
| &dev->mode_config.connector_list, head) { |
| if (intel_attached_encoder(connector) == &intel_sdvo->base) { |
| drm_connector_unregister(connector); |
| intel_sdvo_destroy(connector); |
| } |
| } |
| } |
| |
| static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_connector *intel_sdvo_connector, |
| int type) |
| { |
| struct drm_device *dev = intel_sdvo->base.base.dev; |
| struct intel_sdvo_tv_format format; |
| uint32_t format_map, i; |
| |
| if (!intel_sdvo_set_target_output(intel_sdvo, type)) |
| return false; |
| |
| BUILD_BUG_ON(sizeof(format) != 6); |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_SUPPORTED_TV_FORMATS, |
| &format, sizeof(format))) |
| return false; |
| |
| memcpy(&format_map, &format, min(sizeof(format_map), sizeof(format))); |
| |
| if (format_map == 0) |
| return false; |
| |
| intel_sdvo_connector->format_supported_num = 0; |
| for (i = 0 ; i < TV_FORMAT_NUM; i++) |
| if (format_map & (1 << i)) |
| intel_sdvo_connector->tv_format_supported[intel_sdvo_connector->format_supported_num++] = i; |
| |
| |
| intel_sdvo_connector->tv_format = |
| drm_property_create(dev, DRM_MODE_PROP_ENUM, |
| "mode", intel_sdvo_connector->format_supported_num); |
| if (!intel_sdvo_connector->tv_format) |
| return false; |
| |
| for (i = 0; i < intel_sdvo_connector->format_supported_num; i++) |
| drm_property_add_enum( |
| intel_sdvo_connector->tv_format, i, |
| i, tv_format_names[intel_sdvo_connector->tv_format_supported[i]]); |
| |
| intel_sdvo_connector->base.base.state->tv.mode = intel_sdvo_connector->tv_format_supported[0]; |
| drm_object_attach_property(&intel_sdvo_connector->base.base.base, |
| intel_sdvo_connector->tv_format, 0); |
| return true; |
| |
| } |
| |
| #define _ENHANCEMENT(state_assignment, name, NAME) do { \ |
| if (enhancements.name) { \ |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_MAX_##NAME, &data_value, 4) || \ |
| !intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_##NAME, &response, 2)) \ |
| return false; \ |
| intel_sdvo_connector->name = \ |
| drm_property_create_range(dev, 0, #name, 0, data_value[0]); \ |
| if (!intel_sdvo_connector->name) return false; \ |
| state_assignment = response; \ |
| drm_object_attach_property(&connector->base, \ |
| intel_sdvo_connector->name, 0); \ |
| DRM_DEBUG_KMS(#name ": max %d, default %d, current %d\n", \ |
| data_value[0], data_value[1], response); \ |
| } \ |
| } while (0) |
| |
| #define ENHANCEMENT(state, name, NAME) _ENHANCEMENT((state)->name, name, NAME) |
| |
| static bool |
| intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_connector *intel_sdvo_connector, |
| struct intel_sdvo_enhancements_reply enhancements) |
| { |
| struct drm_device *dev = intel_sdvo->base.base.dev; |
| struct drm_connector *connector = &intel_sdvo_connector->base.base; |
| struct drm_connector_state *conn_state = connector->state; |
| struct intel_sdvo_connector_state *sdvo_state = |
| to_intel_sdvo_connector_state(conn_state); |
| uint16_t response, data_value[2]; |
| |
| /* when horizontal overscan is supported, Add the left/right property */ |
| if (enhancements.overscan_h) { |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_MAX_OVERSCAN_H, |
| &data_value, 4)) |
| return false; |
| |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_OVERSCAN_H, |
| &response, 2)) |
| return false; |
| |
| sdvo_state->tv.overscan_h = response; |
| |
| intel_sdvo_connector->max_hscan = data_value[0]; |
| intel_sdvo_connector->left = |
| drm_property_create_range(dev, 0, "left_margin", 0, data_value[0]); |
| if (!intel_sdvo_connector->left) |
| return false; |
| |
| drm_object_attach_property(&connector->base, |
| intel_sdvo_connector->left, 0); |
| |
| intel_sdvo_connector->right = |
| drm_property_create_range(dev, 0, "right_margin", 0, data_value[0]); |
| if (!intel_sdvo_connector->right) |
| return false; |
| |
| drm_object_attach_property(&connector->base, |
| intel_sdvo_connector->right, 0); |
| DRM_DEBUG_KMS("h_overscan: max %d, " |
| "default %d, current %d\n", |
| data_value[0], data_value[1], response); |
| } |
| |
| if (enhancements.overscan_v) { |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_MAX_OVERSCAN_V, |
| &data_value, 4)) |
| return false; |
| |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_OVERSCAN_V, |
| &response, 2)) |
| return false; |
| |
| sdvo_state->tv.overscan_v = response; |
| |
| intel_sdvo_connector->max_vscan = data_value[0]; |
| intel_sdvo_connector->top = |
| drm_property_create_range(dev, 0, |
| "top_margin", 0, data_value[0]); |
| if (!intel_sdvo_connector->top) |
| return false; |
| |
| drm_object_attach_property(&connector->base, |
| intel_sdvo_connector->top, 0); |
| |
| intel_sdvo_connector->bottom = |
| drm_property_create_range(dev, 0, |
| "bottom_margin", 0, data_value[0]); |
| if (!intel_sdvo_connector->bottom) |
| return false; |
| |
| drm_object_attach_property(&connector->base, |
| intel_sdvo_connector->bottom, 0); |
| DRM_DEBUG_KMS("v_overscan: max %d, " |
| "default %d, current %d\n", |
| data_value[0], data_value[1], response); |
| } |
| |
| ENHANCEMENT(&sdvo_state->tv, hpos, HPOS); |
| ENHANCEMENT(&sdvo_state->tv, vpos, VPOS); |
| ENHANCEMENT(&conn_state->tv, saturation, SATURATION); |
| ENHANCEMENT(&conn_state->tv, contrast, CONTRAST); |
| ENHANCEMENT(&conn_state->tv, hue, HUE); |
| ENHANCEMENT(&conn_state->tv, brightness, BRIGHTNESS); |
| ENHANCEMENT(&sdvo_state->tv, sharpness, SHARPNESS); |
| ENHANCEMENT(&sdvo_state->tv, flicker_filter, FLICKER_FILTER); |
| ENHANCEMENT(&sdvo_state->tv, flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE); |
| ENHANCEMENT(&sdvo_state->tv, flicker_filter_2d, FLICKER_FILTER_2D); |
| _ENHANCEMENT(sdvo_state->tv.chroma_filter, tv_chroma_filter, TV_CHROMA_FILTER); |
| _ENHANCEMENT(sdvo_state->tv.luma_filter, tv_luma_filter, TV_LUMA_FILTER); |
| |
| if (enhancements.dot_crawl) { |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_DOT_CRAWL, &response, 2)) |
| return false; |
| |
| sdvo_state->tv.dot_crawl = response & 0x1; |
| intel_sdvo_connector->dot_crawl = |
| drm_property_create_range(dev, 0, "dot_crawl", 0, 1); |
| if (!intel_sdvo_connector->dot_crawl) |
| return false; |
| |
| drm_object_attach_property(&connector->base, |
| intel_sdvo_connector->dot_crawl, 0); |
| DRM_DEBUG_KMS("dot crawl: current %d\n", response); |
| } |
| |
| return true; |
| } |
| |
| static bool |
| intel_sdvo_create_enhance_property_lvds(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_connector *intel_sdvo_connector, |
| struct intel_sdvo_enhancements_reply enhancements) |
| { |
| struct drm_device *dev = intel_sdvo->base.base.dev; |
| struct drm_connector *connector = &intel_sdvo_connector->base.base; |
| uint16_t response, data_value[2]; |
| |
| ENHANCEMENT(&connector->state->tv, brightness, BRIGHTNESS); |
| |
| return true; |
| } |
| #undef ENHANCEMENT |
| #undef _ENHANCEMENT |
| |
| static bool intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo, |
| struct intel_sdvo_connector *intel_sdvo_connector) |
| { |
| union { |
| struct intel_sdvo_enhancements_reply reply; |
| uint16_t response; |
| } enhancements; |
| |
| BUILD_BUG_ON(sizeof(enhancements) != 2); |
| |
| if (!intel_sdvo_get_value(intel_sdvo, |
| SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS, |
| &enhancements, sizeof(enhancements)) || |
| enhancements.response == 0) { |
| DRM_DEBUG_KMS("No enhancement is supported\n"); |
| return true; |
| } |
| |
| if (IS_TV(intel_sdvo_connector)) |
| return intel_sdvo_create_enhance_property_tv(intel_sdvo, intel_sdvo_connector, enhancements.reply); |
| else if (IS_LVDS(intel_sdvo_connector)) |
| return intel_sdvo_create_enhance_property_lvds(intel_sdvo, intel_sdvo_connector, enhancements.reply); |
| else |
| return true; |
| } |
| |
| static int intel_sdvo_ddc_proxy_xfer(struct i2c_adapter *adapter, |
| struct i2c_msg *msgs, |
| int num) |
| { |
| struct intel_sdvo *sdvo = adapter->algo_data; |
| |
| if (!__intel_sdvo_set_control_bus_switch(sdvo, sdvo->ddc_bus)) |
| return -EIO; |
| |
| return sdvo->i2c->algo->master_xfer(sdvo->i2c, msgs, num); |
| } |
| |
| static u32 intel_sdvo_ddc_proxy_func(struct i2c_adapter *adapter) |
| { |
| struct intel_sdvo *sdvo = adapter->algo_data; |
| return sdvo->i2c->algo->functionality(sdvo->i2c); |
| } |
| |
| static const struct i2c_algorithm intel_sdvo_ddc_proxy = { |
| .master_xfer = intel_sdvo_ddc_proxy_xfer, |
| .functionality = intel_sdvo_ddc_proxy_func |
| }; |
| |
| static void proxy_lock_bus(struct i2c_adapter *adapter, |
| unsigned int flags) |
| { |
| struct intel_sdvo *sdvo = adapter->algo_data; |
| sdvo->i2c->lock_ops->lock_bus(sdvo->i2c, flags); |
| } |
| |
| static int proxy_trylock_bus(struct i2c_adapter *adapter, |
| unsigned int flags) |
| { |
| struct intel_sdvo *sdvo = adapter->algo_data; |
| return sdvo->i2c->lock_ops->trylock_bus(sdvo->i2c, flags); |
| } |
| |
| static void proxy_unlock_bus(struct i2c_adapter *adapter, |
| unsigned int flags) |
| { |
| struct intel_sdvo *sdvo = adapter->algo_data; |
| sdvo->i2c->lock_ops->unlock_bus(sdvo->i2c, flags); |
| } |
| |
| static const struct i2c_lock_operations proxy_lock_ops = { |
| .lock_bus = proxy_lock_bus, |
| .trylock_bus = proxy_trylock_bus, |
| .unlock_bus = proxy_unlock_bus, |
| }; |
| |
| static bool |
| intel_sdvo_init_ddc_proxy(struct intel_sdvo *sdvo, |
| struct drm_i915_private *dev_priv) |
| { |
| struct pci_dev *pdev = dev_priv->drm.pdev; |
| |
| sdvo->ddc.owner = THIS_MODULE; |
| sdvo->ddc.class = I2C_CLASS_DDC; |
| snprintf(sdvo->ddc.name, I2C_NAME_SIZE, "SDVO DDC proxy"); |
| sdvo->ddc.dev.parent = &pdev->dev; |
| sdvo->ddc.algo_data = sdvo; |
| sdvo->ddc.algo = &intel_sdvo_ddc_proxy; |
| sdvo->ddc.lock_ops = &proxy_lock_ops; |
| |
| return i2c_add_adapter(&sdvo->ddc) == 0; |
| } |
| |
| static void assert_sdvo_port_valid(const struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (HAS_PCH_SPLIT(dev_priv)) |
| WARN_ON(port != PORT_B); |
| else |
| WARN_ON(port != PORT_B && port != PORT_C); |
| } |
| |
| bool intel_sdvo_init(struct drm_i915_private *dev_priv, |
| i915_reg_t sdvo_reg, enum port port) |
| { |
| struct intel_encoder *intel_encoder; |
| struct intel_sdvo *intel_sdvo; |
| int i; |
| |
| assert_sdvo_port_valid(dev_priv, port); |
| |
| intel_sdvo = kzalloc(sizeof(*intel_sdvo), GFP_KERNEL); |
| if (!intel_sdvo) |
| return false; |
| |
| intel_sdvo->sdvo_reg = sdvo_reg; |
| intel_sdvo->port = port; |
| intel_sdvo->slave_addr = |
| intel_sdvo_get_slave_addr(dev_priv, intel_sdvo) >> 1; |
| intel_sdvo_select_i2c_bus(dev_priv, intel_sdvo); |
| if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev_priv)) |
| goto err_i2c_bus; |
| |
| /* encoder type will be decided later */ |
| intel_encoder = &intel_sdvo->base; |
| intel_encoder->type = INTEL_OUTPUT_SDVO; |
| intel_encoder->power_domain = POWER_DOMAIN_PORT_OTHER; |
| intel_encoder->port = port; |
| drm_encoder_init(&dev_priv->drm, &intel_encoder->base, |
| &intel_sdvo_enc_funcs, 0, |
| "SDVO %c", port_name(port)); |
| |
| /* Read the regs to test if we can talk to the device */ |
| for (i = 0; i < 0x40; i++) { |
| u8 byte; |
| |
| if (!intel_sdvo_read_byte(intel_sdvo, i, &byte)) { |
| DRM_DEBUG_KMS("No SDVO device found on %s\n", |
| SDVO_NAME(intel_sdvo)); |
| goto err; |
| } |
| } |
| |
| intel_encoder->compute_config = intel_sdvo_compute_config; |
| if (HAS_PCH_SPLIT(dev_priv)) { |
| intel_encoder->disable = pch_disable_sdvo; |
| intel_encoder->post_disable = pch_post_disable_sdvo; |
| } else { |
| intel_encoder->disable = intel_disable_sdvo; |
| } |
| intel_encoder->pre_enable = intel_sdvo_pre_enable; |
| intel_encoder->enable = intel_enable_sdvo; |
| intel_encoder->get_hw_state = intel_sdvo_get_hw_state; |
| intel_encoder->get_config = intel_sdvo_get_config; |
| |
| /* In default case sdvo lvds is false */ |
| if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps)) |
| goto err; |
| |
| if (intel_sdvo_output_setup(intel_sdvo, |
| intel_sdvo->caps.output_flags) != true) { |
| DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", |
| SDVO_NAME(intel_sdvo)); |
| /* Output_setup can leave behind connectors! */ |
| goto err_output; |
| } |
| |
| /* Only enable the hotplug irq if we need it, to work around noisy |
| * hotplug lines. |
| */ |
| if (intel_sdvo->hotplug_active) { |
| if (intel_sdvo->port == PORT_B) |
| intel_encoder->hpd_pin = HPD_SDVO_B; |
| else |
| intel_encoder->hpd_pin = HPD_SDVO_C; |
| } |
| |
| /* |
| * Cloning SDVO with anything is often impossible, since the SDVO |
| * encoder can request a special input timing mode. And even if that's |
| * not the case we have evidence that cloning a plain unscaled mode with |
| * VGA doesn't really work. Furthermore the cloning flags are way too |
| * simplistic anyway to express such constraints, so just give up on |
| * cloning for SDVO encoders. |
| */ |
| intel_sdvo->base.cloneable = 0; |
| |
| intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo); |
| |
| /* Set the input timing to the screen. Assume always input 0. */ |
| if (!intel_sdvo_set_target_input(intel_sdvo)) |
| goto err_output; |
| |
| if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo, |
| &intel_sdvo->pixel_clock_min, |
| &intel_sdvo->pixel_clock_max)) |
| goto err_output; |
| |
| DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, " |
| "clock range %dMHz - %dMHz, " |
| "input 1: %c, input 2: %c, " |
| "output 1: %c, output 2: %c\n", |
| SDVO_NAME(intel_sdvo), |
| intel_sdvo->caps.vendor_id, intel_sdvo->caps.device_id, |
| intel_sdvo->caps.device_rev_id, |
| intel_sdvo->pixel_clock_min / 1000, |
| intel_sdvo->pixel_clock_max / 1000, |
| (intel_sdvo->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', |
| (intel_sdvo->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', |
| /* check currently supported outputs */ |
| intel_sdvo->caps.output_flags & |
| (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N', |
| intel_sdvo->caps.output_flags & |
| (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); |
| return true; |
| |
| err_output: |
| intel_sdvo_output_cleanup(intel_sdvo); |
| |
| err: |
| drm_encoder_cleanup(&intel_encoder->base); |
| i2c_del_adapter(&intel_sdvo->ddc); |
| err_i2c_bus: |
| intel_sdvo_unselect_i2c_bus(intel_sdvo); |
| kfree(intel_sdvo); |
| |
| return false; |
| } |