blob: d2b1d60fec021cdf00e5e264f50c111d9f163fa8 [file] [log] [blame]
/*
* skl-sst-cldma.c - Code Loader DMA handler
*
* Copyright (C) 2015, Intel Corporation.
* Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include "../common/sst-dsp.h"
#include "../common/sst-dsp-priv.h"
static void skl_cldma_int_enable(struct sst_dsp *ctx)
{
sst_dsp_shim_update_bits_unlocked(ctx, SKL_ADSP_REG_ADSPIC,
SKL_ADSPIC_CL_DMA, SKL_ADSPIC_CL_DMA);
}
void skl_cldma_int_disable(struct sst_dsp *ctx)
{
sst_dsp_shim_update_bits_unlocked(ctx,
SKL_ADSP_REG_ADSPIC, SKL_ADSPIC_CL_DMA, 0);
}
static void skl_cldma_stream_run(struct sst_dsp *ctx, bool enable)
{
unsigned char val;
int timeout;
sst_dsp_shim_update_bits_unlocked(ctx,
SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_RUN_MASK, CL_SD_CTL_RUN(enable));
udelay(3);
timeout = 300;
do {
/* waiting for hardware to report that the stream Run bit set */
val = sst_dsp_shim_read(ctx, SKL_ADSP_REG_CL_SD_CTL) &
CL_SD_CTL_RUN_MASK;
if (enable && val)
break;
else if (!enable && !val)
break;
udelay(3);
} while (--timeout);
if (timeout == 0)
dev_err(ctx->dev, "Failed to set Run bit=%d enable=%d\n", val, enable);
}
static void skl_cldma_stream_clear(struct sst_dsp *ctx)
{
/* make sure Run bit is cleared before setting stream register */
skl_cldma_stream_run(ctx, 0);
sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
}
/* Code loader helper APIs */
static void skl_cldma_setup_bdle(struct sst_dsp *ctx,
struct snd_dma_buffer *dmab_data,
u32 **bdlp, int size, int with_ioc)
{
u32 *bdl = *bdlp;
ctx->cl_dev.frags = 0;
while (size > 0) {
phys_addr_t addr = virt_to_phys(dmab_data->area +
(ctx->cl_dev.frags * ctx->cl_dev.bufsize));
bdl[0] = cpu_to_le32(lower_32_bits(addr));
bdl[1] = cpu_to_le32(upper_32_bits(addr));
bdl[2] = cpu_to_le32(ctx->cl_dev.bufsize);
size -= ctx->cl_dev.bufsize;
bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01);
bdl += 4;
ctx->cl_dev.frags++;
}
}
/*
* Setup controller
* Configure the registers to update the dma buffer address and
* enable interrupts.
* Note: Using the channel 1 for transfer
*/
static void skl_cldma_setup_controller(struct sst_dsp *ctx,
struct snd_dma_buffer *dmab_bdl, unsigned int max_size,
u32 count)
{
skl_cldma_stream_clear(ctx);
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL,
CL_SD_BDLPLBA(dmab_bdl->addr));
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU,
CL_SD_BDLPUBA(dmab_bdl->addr));
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, max_size);
sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, count - 1);
sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(1));
sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(1));
sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(1));
sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(FW_CL_STREAM_NUMBER));
}
static void skl_cldma_setup_spb(struct sst_dsp *ctx,
unsigned int size, bool enable)
{
if (enable)
sst_dsp_shim_update_bits_unlocked(ctx,
SKL_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
CL_SPBFIFO_SPBFCCTL_SPIBE(1));
sst_dsp_shim_write_unlocked(ctx, SKL_ADSP_REG_CL_SPBFIFO_SPIB, size);
}
static void skl_cldma_cleanup_spb(struct sst_dsp *ctx)
{
sst_dsp_shim_update_bits_unlocked(ctx,
SKL_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
CL_SPBFIFO_SPBFCCTL_SPIBE(0));
sst_dsp_shim_write_unlocked(ctx, SKL_ADSP_REG_CL_SPBFIFO_SPIB, 0);
}
static void skl_cldma_cleanup(struct sst_dsp *ctx)
{
skl_cldma_cleanup_spb(ctx);
skl_cldma_stream_clear(ctx);
ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl);
}
int skl_cldma_wait_interruptible(struct sst_dsp *ctx)
{
int ret = 0;
if (!wait_event_timeout(ctx->cl_dev.wait_queue,
ctx->cl_dev.wait_condition,
msecs_to_jiffies(SKL_WAIT_TIMEOUT))) {
dev_err(ctx->dev, "%s: Wait timeout\n", __func__);
ret = -EIO;
goto cleanup;
}
dev_dbg(ctx->dev, "%s: Event wake\n", __func__);
if (ctx->cl_dev.wake_status != SKL_CL_DMA_BUF_COMPLETE) {
dev_err(ctx->dev, "%s: DMA Error\n", __func__);
ret = -EIO;
}
cleanup:
ctx->cl_dev.wake_status = SKL_CL_DMA_STATUS_NONE;
return ret;
}
static void skl_cldma_stop(struct sst_dsp *ctx)
{
skl_cldma_stream_run(ctx, false);
}
static void skl_cldma_fill_buffer(struct sst_dsp *ctx, unsigned int size,
const void *curr_pos, bool intr_enable, bool trigger)
{
dev_dbg(ctx->dev, "Size: %x, intr_enable: %d\n", size, intr_enable);
dev_dbg(ctx->dev, "buf_pos_index:%d, trigger:%d\n",
ctx->cl_dev.dma_buffer_offset, trigger);
dev_dbg(ctx->dev, "spib position: %d\n", ctx->cl_dev.curr_spib_pos);
/*
* Check if the size exceeds buffer boundary. If it exceeds
* max_buffer size, then copy till buffer size and then copy
* remaining buffer from the start of ring buffer.
*/
if (ctx->cl_dev.dma_buffer_offset + size > ctx->cl_dev.bufsize) {
unsigned int size_b = ctx->cl_dev.bufsize -
ctx->cl_dev.dma_buffer_offset;
memcpy(ctx->cl_dev.dmab_data.area + ctx->cl_dev.dma_buffer_offset,
curr_pos, size_b);
size -= size_b;
curr_pos += size_b;
ctx->cl_dev.dma_buffer_offset = 0;
}
memcpy(ctx->cl_dev.dmab_data.area + ctx->cl_dev.dma_buffer_offset,
curr_pos, size);
if (ctx->cl_dev.curr_spib_pos == ctx->cl_dev.bufsize)
ctx->cl_dev.dma_buffer_offset = 0;
else
ctx->cl_dev.dma_buffer_offset = ctx->cl_dev.curr_spib_pos;
ctx->cl_dev.wait_condition = false;
if (intr_enable)
skl_cldma_int_enable(ctx);
ctx->cl_dev.ops.cl_setup_spb(ctx, ctx->cl_dev.curr_spib_pos, trigger);
if (trigger)
ctx->cl_dev.ops.cl_trigger(ctx, true);
}
/*
* The CL dma doesn't have any way to update the transfer status until a BDL
* buffer is fully transferred
*
* So Copying is divided in two parts.
* 1. Interrupt on buffer done where the size to be transferred is more than
* ring buffer size.
* 2. Polling on fw register to identify if data left to transferred doesn't
* fill the ring buffer. Caller takes care of polling the required status
* register to identify the transfer status.
* 3. if wait flag is set, waits for DBL interrupt to copy the next chunk till
* bytes_left is 0.
* if wait flag is not set, doesn't wait for BDL interrupt. after ccopying
* the first chunk return the no of bytes_left to be copied.
*/
static int
skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin,
u32 total_size, bool wait)
{
int ret = 0;
bool start = true;
unsigned int excess_bytes;
u32 size;
unsigned int bytes_left = total_size;
const void *curr_pos = bin;
if (total_size <= 0)
return -EINVAL;
dev_dbg(ctx->dev, "%s: Total binary size: %u\n", __func__, bytes_left);
while (bytes_left) {
if (bytes_left > ctx->cl_dev.bufsize) {
/*
* dma transfers only till the write pointer as
* updated in spib
*/
if (ctx->cl_dev.curr_spib_pos == 0)
ctx->cl_dev.curr_spib_pos = ctx->cl_dev.bufsize;
size = ctx->cl_dev.bufsize;
skl_cldma_fill_buffer(ctx, size, curr_pos, true, start);
if (wait) {
start = false;
ret = skl_cldma_wait_interruptible(ctx);
if (ret < 0) {
skl_cldma_stop(ctx);
return ret;
}
}
} else {
skl_cldma_int_disable(ctx);
if ((ctx->cl_dev.curr_spib_pos + bytes_left)
<= ctx->cl_dev.bufsize) {
ctx->cl_dev.curr_spib_pos += bytes_left;
} else {
excess_bytes = bytes_left -
(ctx->cl_dev.bufsize -
ctx->cl_dev.curr_spib_pos);
ctx->cl_dev.curr_spib_pos = excess_bytes;
}
size = bytes_left;
skl_cldma_fill_buffer(ctx, size,
curr_pos, false, start);
}
bytes_left -= size;
curr_pos = curr_pos + size;
if (!wait)
return bytes_left;
}
return bytes_left;
}
void skl_cldma_process_intr(struct sst_dsp *ctx)
{
u8 cl_dma_intr_status;
cl_dma_intr_status =
sst_dsp_shim_read_unlocked(ctx, SKL_ADSP_REG_CL_SD_STS);
if (!(cl_dma_intr_status & SKL_CL_DMA_SD_INT_COMPLETE))
ctx->cl_dev.wake_status = SKL_CL_DMA_ERR;
else
ctx->cl_dev.wake_status = SKL_CL_DMA_BUF_COMPLETE;
ctx->cl_dev.wait_condition = true;
wake_up(&ctx->cl_dev.wait_queue);
}
int skl_cldma_prepare(struct sst_dsp *ctx)
{
int ret;
u32 *bdl;
ctx->cl_dev.bufsize = SKL_MAX_BUFFER_SIZE;
/* Allocate cl ops */
ctx->cl_dev.ops.cl_setup_bdle = skl_cldma_setup_bdle;
ctx->cl_dev.ops.cl_setup_controller = skl_cldma_setup_controller;
ctx->cl_dev.ops.cl_setup_spb = skl_cldma_setup_spb;
ctx->cl_dev.ops.cl_cleanup_spb = skl_cldma_cleanup_spb;
ctx->cl_dev.ops.cl_trigger = skl_cldma_stream_run;
ctx->cl_dev.ops.cl_cleanup_controller = skl_cldma_cleanup;
ctx->cl_dev.ops.cl_copy_to_dmabuf = skl_cldma_copy_to_buf;
ctx->cl_dev.ops.cl_stop_dma = skl_cldma_stop;
/* Allocate buffer*/
ret = ctx->dsp_ops.alloc_dma_buf(ctx->dev,
&ctx->cl_dev.dmab_data, ctx->cl_dev.bufsize);
if (ret < 0) {
dev_err(ctx->dev, "Alloc buffer for base fw failed: %x\n", ret);
return ret;
}
/* Setup Code loader BDL */
ret = ctx->dsp_ops.alloc_dma_buf(ctx->dev,
&ctx->cl_dev.dmab_bdl, PAGE_SIZE);
if (ret < 0) {
dev_err(ctx->dev, "Alloc buffer for blde failed: %x\n", ret);
ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
return ret;
}
bdl = (u32 *)ctx->cl_dev.dmab_bdl.area;
/* Allocate BDLs */
ctx->cl_dev.ops.cl_setup_bdle(ctx, &ctx->cl_dev.dmab_data,
&bdl, ctx->cl_dev.bufsize, 1);
ctx->cl_dev.ops.cl_setup_controller(ctx, &ctx->cl_dev.dmab_bdl,
ctx->cl_dev.bufsize, ctx->cl_dev.frags);
ctx->cl_dev.curr_spib_pos = 0;
ctx->cl_dev.dma_buffer_offset = 0;
init_waitqueue_head(&ctx->cl_dev.wait_queue);
return ret;
}