| /* | |
| * IBM Summit-Specific Code | |
| * | |
| * Written By: Matthew Dobson, IBM Corporation | |
| * | |
| * Copyright (c) 2003 IBM Corp. | |
| * | |
| * All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or (at | |
| * your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for more | |
| * details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| * | |
| * Send feedback to <colpatch@us.ibm.com> | |
| * | |
| */ | |
| #define pr_fmt(fmt) "summit: %s: " fmt, __func__ | |
| #include <linux/mm.h> | |
| #include <linux/init.h> | |
| #include <asm/io.h> | |
| #include <asm/bios_ebda.h> | |
| /* | |
| * APIC driver for the IBM "Summit" chipset. | |
| */ | |
| #include <linux/threads.h> | |
| #include <linux/cpumask.h> | |
| #include <asm/mpspec.h> | |
| #include <asm/apic.h> | |
| #include <asm/smp.h> | |
| #include <asm/fixmap.h> | |
| #include <asm/apicdef.h> | |
| #include <asm/ipi.h> | |
| #include <linux/kernel.h> | |
| #include <linux/string.h> | |
| #include <linux/gfp.h> | |
| #include <linux/smp.h> | |
| static unsigned summit_get_apic_id(unsigned long x) | |
| { | |
| return (x >> 24) & 0xFF; | |
| } | |
| static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector) | |
| { | |
| default_send_IPI_mask_sequence_logical(mask, vector); | |
| } | |
| static void summit_send_IPI_allbutself(int vector) | |
| { | |
| default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector); | |
| } | |
| static void summit_send_IPI_all(int vector) | |
| { | |
| summit_send_IPI_mask(cpu_online_mask, vector); | |
| } | |
| #include <asm/tsc.h> | |
| extern int use_cyclone; | |
| #ifdef CONFIG_X86_SUMMIT_NUMA | |
| static void setup_summit(void); | |
| #else | |
| static inline void setup_summit(void) {} | |
| #endif | |
| static int summit_mps_oem_check(struct mpc_table *mpc, char *oem, | |
| char *productid) | |
| { | |
| if (!strncmp(oem, "IBM ENSW", 8) && | |
| (!strncmp(productid, "VIGIL SMP", 9) | |
| || !strncmp(productid, "EXA", 3) | |
| || !strncmp(productid, "RUTHLESS SMP", 12))){ | |
| mark_tsc_unstable("Summit based system"); | |
| use_cyclone = 1; /*enable cyclone-timer*/ | |
| setup_summit(); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* Hook from generic ACPI tables.c */ | |
| static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id) | |
| { | |
| if (!strncmp(oem_id, "IBM", 3) && | |
| (!strncmp(oem_table_id, "SERVIGIL", 8) | |
| || !strncmp(oem_table_id, "EXA", 3))){ | |
| mark_tsc_unstable("Summit based system"); | |
| use_cyclone = 1; /*enable cyclone-timer*/ | |
| setup_summit(); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| struct rio_table_hdr { | |
| unsigned char version; /* Version number of this data structure */ | |
| /* Version 3 adds chassis_num & WP_index */ | |
| unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */ | |
| unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */ | |
| } __attribute__((packed)); | |
| struct scal_detail { | |
| unsigned char node_id; /* Scalability Node ID */ | |
| unsigned long CBAR; /* Address of 1MB register space */ | |
| unsigned char port0node; /* Node ID port connected to: 0xFF=None */ | |
| unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ | |
| unsigned char port1node; /* Node ID port connected to: 0xFF = None */ | |
| unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ | |
| unsigned char port2node; /* Node ID port connected to: 0xFF = None */ | |
| unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */ | |
| unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */ | |
| } __attribute__((packed)); | |
| struct rio_detail { | |
| unsigned char node_id; /* RIO Node ID */ | |
| unsigned long BBAR; /* Address of 1MB register space */ | |
| unsigned char type; /* Type of device */ | |
| unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/ | |
| /* For CYC: Node ID of Twister that owns this CYC */ | |
| unsigned char port0node; /* Node ID port connected to: 0xFF=None */ | |
| unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ | |
| unsigned char port1node; /* Node ID port connected to: 0xFF=None */ | |
| unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ | |
| unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */ | |
| /* For CYC: 0 */ | |
| unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */ | |
| /* = 0 : the XAPIC is not used, ie:*/ | |
| /* ints fwded to another XAPIC */ | |
| /* Bits1:7 Reserved */ | |
| /* For CYC: Bits0:7 Reserved */ | |
| unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */ | |
| /* lower slot numbers/PCI bus numbers */ | |
| /* For CYC: No meaning */ | |
| unsigned char chassis_num; /* 1 based Chassis number */ | |
| /* For LookOut WPEGs this field indicates the */ | |
| /* Expansion Chassis #, enumerated from Boot */ | |
| /* Node WPEG external port, then Boot Node CYC */ | |
| /* external port, then Next Vigil chassis WPEG */ | |
| /* external port, etc. */ | |
| /* Shared Lookouts have only 1 chassis number (the */ | |
| /* first one assigned) */ | |
| } __attribute__((packed)); | |
| typedef enum { | |
| CompatTwister = 0, /* Compatibility Twister */ | |
| AltTwister = 1, /* Alternate Twister of internal 8-way */ | |
| CompatCyclone = 2, /* Compatibility Cyclone */ | |
| AltCyclone = 3, /* Alternate Cyclone of internal 8-way */ | |
| CompatWPEG = 4, /* Compatibility WPEG */ | |
| AltWPEG = 5, /* Second Planar WPEG */ | |
| LookOutAWPEG = 6, /* LookOut WPEG */ | |
| LookOutBWPEG = 7, /* LookOut WPEG */ | |
| } node_type; | |
| static inline int is_WPEG(struct rio_detail *rio){ | |
| return (rio->type == CompatWPEG || rio->type == AltWPEG || | |
| rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); | |
| } | |
| #define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER) | |
| static const struct cpumask *summit_target_cpus(void) | |
| { | |
| /* CPU_MASK_ALL (0xff) has undefined behaviour with | |
| * dest_LowestPrio mode logical clustered apic interrupt routing | |
| * Just start on cpu 0. IRQ balancing will spread load | |
| */ | |
| return cpumask_of(0); | |
| } | |
| static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid) | |
| { | |
| return 0; | |
| } | |
| /* we don't use the phys_cpu_present_map to indicate apicid presence */ | |
| static unsigned long summit_check_apicid_present(int bit) | |
| { | |
| return 1; | |
| } | |
| static int summit_early_logical_apicid(int cpu) | |
| { | |
| int count = 0; | |
| u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu); | |
| u8 my_cluster = APIC_CLUSTER(my_id); | |
| #ifdef CONFIG_SMP | |
| u8 lid; | |
| int i; | |
| /* Create logical APIC IDs by counting CPUs already in cluster. */ | |
| for (count = 0, i = nr_cpu_ids; --i >= 0; ) { | |
| lid = early_per_cpu(x86_cpu_to_logical_apicid, i); | |
| if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster) | |
| ++count; | |
| } | |
| #endif | |
| /* We only have a 4 wide bitmap in cluster mode. If a deranged | |
| * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ | |
| BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); | |
| return my_cluster | (1UL << count); | |
| } | |
| static void summit_init_apic_ldr(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu); | |
| unsigned long val; | |
| apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE); | |
| val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; | |
| val |= SET_APIC_LOGICAL_ID(id); | |
| apic_write(APIC_LDR, val); | |
| } | |
| static int summit_apic_id_registered(void) | |
| { | |
| return 1; | |
| } | |
| static void summit_setup_apic_routing(void) | |
| { | |
| pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n", | |
| nr_ioapics); | |
| } | |
| static int summit_cpu_present_to_apicid(int mps_cpu) | |
| { | |
| if (mps_cpu < nr_cpu_ids) | |
| return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); | |
| else | |
| return BAD_APICID; | |
| } | |
| static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap) | |
| { | |
| /* For clustered we don't have a good way to do this yet - hack */ | |
| physids_promote(0x0FL, retmap); | |
| } | |
| static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap) | |
| { | |
| physid_set_mask_of_physid(0, retmap); | |
| } | |
| static int summit_check_phys_apicid_present(int physical_apicid) | |
| { | |
| return 1; | |
| } | |
| static inline int | |
| summit_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id) | |
| { | |
| unsigned int round = 0; | |
| unsigned int cpu, apicid = 0; | |
| /* | |
| * The cpus in the mask must all be on the apic cluster. | |
| */ | |
| for_each_cpu_and(cpu, cpumask, cpu_online_mask) { | |
| int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); | |
| if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { | |
| pr_err("Not a valid mask!\n"); | |
| return -EINVAL; | |
| } | |
| apicid |= new_apicid; | |
| round++; | |
| } | |
| if (!round) | |
| return -EINVAL; | |
| *dest_id = apicid; | |
| return 0; | |
| } | |
| static int | |
| summit_cpu_mask_to_apicid_and(const struct cpumask *inmask, | |
| const struct cpumask *andmask, | |
| unsigned int *apicid) | |
| { | |
| cpumask_var_t cpumask; | |
| *apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); | |
| if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) | |
| return 0; | |
| cpumask_and(cpumask, inmask, andmask); | |
| summit_cpu_mask_to_apicid(cpumask, apicid); | |
| free_cpumask_var(cpumask); | |
| return 0; | |
| } | |
| /* | |
| * cpuid returns the value latched in the HW at reset, not the APIC ID | |
| * register's value. For any box whose BIOS changes APIC IDs, like | |
| * clustered APIC systems, we must use hard_smp_processor_id. | |
| * | |
| * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. | |
| */ | |
| static int summit_phys_pkg_id(int cpuid_apic, int index_msb) | |
| { | |
| return hard_smp_processor_id() >> index_msb; | |
| } | |
| static int probe_summit(void) | |
| { | |
| /* probed later in mptable/ACPI hooks */ | |
| return 0; | |
| } | |
| #ifdef CONFIG_X86_SUMMIT_NUMA | |
| static struct rio_table_hdr *rio_table_hdr; | |
| static struct scal_detail *scal_devs[MAX_NUMNODES]; | |
| static struct rio_detail *rio_devs[MAX_NUMNODES*4]; | |
| #ifndef CONFIG_X86_NUMAQ | |
| static int mp_bus_id_to_node[MAX_MP_BUSSES]; | |
| #endif | |
| static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) | |
| { | |
| int twister = 0, node = 0; | |
| int i, bus, num_buses; | |
| for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { | |
| if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) { | |
| twister = rio_devs[i]->owner_id; | |
| break; | |
| } | |
| } | |
| if (i == rio_table_hdr->num_rio_dev) { | |
| pr_err("Couldn't find owner Cyclone for Winnipeg!\n"); | |
| return last_bus; | |
| } | |
| for (i = 0; i < rio_table_hdr->num_scal_dev; i++) { | |
| if (scal_devs[i]->node_id == twister) { | |
| node = scal_devs[i]->node_id; | |
| break; | |
| } | |
| } | |
| if (i == rio_table_hdr->num_scal_dev) { | |
| pr_err("Couldn't find owner Twister for Cyclone!\n"); | |
| return last_bus; | |
| } | |
| switch (rio_devs[wpeg_num]->type) { | |
| case CompatWPEG: | |
| /* | |
| * The Compatibility Winnipeg controls the 2 legacy buses, | |
| * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case | |
| * a PCI-PCI bridge card is used in either slot: total 5 buses. | |
| */ | |
| num_buses = 5; | |
| break; | |
| case AltWPEG: | |
| /* | |
| * The Alternate Winnipeg controls the 2 133MHz buses [1 slot | |
| * each], their 2 "extra" buses, the 100MHz bus [2 slots] and | |
| * the "extra" buses for each of those slots: total 7 buses. | |
| */ | |
| num_buses = 7; | |
| break; | |
| case LookOutAWPEG: | |
| case LookOutBWPEG: | |
| /* | |
| * A Lookout Winnipeg controls 3 100MHz buses [2 slots each] | |
| * & the "extra" buses for each of those slots: total 9 buses. | |
| */ | |
| num_buses = 9; | |
| break; | |
| default: | |
| pr_info("Unsupported Winnipeg type!\n"); | |
| return last_bus; | |
| } | |
| for (bus = last_bus; bus < last_bus + num_buses; bus++) | |
| mp_bus_id_to_node[bus] = node; | |
| return bus; | |
| } | |
| static int build_detail_arrays(void) | |
| { | |
| unsigned long ptr; | |
| int i, scal_detail_size, rio_detail_size; | |
| if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) { | |
| pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n", | |
| MAX_NUMNODES, rio_table_hdr->num_scal_dev); | |
| return 0; | |
| } | |
| switch (rio_table_hdr->version) { | |
| default: | |
| pr_warn("Invalid Rio Grande Table Version: %d\n", | |
| rio_table_hdr->version); | |
| return 0; | |
| case 2: | |
| scal_detail_size = 11; | |
| rio_detail_size = 13; | |
| break; | |
| case 3: | |
| scal_detail_size = 12; | |
| rio_detail_size = 15; | |
| break; | |
| } | |
| ptr = (unsigned long)rio_table_hdr + 3; | |
| for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size) | |
| scal_devs[i] = (struct scal_detail *)ptr; | |
| for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size) | |
| rio_devs[i] = (struct rio_detail *)ptr; | |
| return 1; | |
| } | |
| void setup_summit(void) | |
| { | |
| unsigned long ptr; | |
| unsigned short offset; | |
| int i, next_wpeg, next_bus = 0; | |
| /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */ | |
| ptr = get_bios_ebda(); | |
| ptr = (unsigned long)phys_to_virt(ptr); | |
| rio_table_hdr = NULL; | |
| offset = 0x180; | |
| while (offset) { | |
| /* The block id is stored in the 2nd word */ | |
| if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) { | |
| /* set the pointer past the offset & block id */ | |
| rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4); | |
| break; | |
| } | |
| /* The next offset is stored in the 1st word. 0 means no more */ | |
| offset = *((unsigned short *)(ptr + offset)); | |
| } | |
| if (!rio_table_hdr) { | |
| pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n"); | |
| return; | |
| } | |
| if (!build_detail_arrays()) | |
| return; | |
| /* The first Winnipeg we're looking for has an index of 0 */ | |
| next_wpeg = 0; | |
| do { | |
| for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { | |
| if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) { | |
| /* It's the Winnipeg we're looking for! */ | |
| next_bus = setup_pci_node_map_for_wpeg(i, next_bus); | |
| next_wpeg++; | |
| break; | |
| } | |
| } | |
| /* | |
| * If we go through all Rio devices and don't find one with | |
| * the next index, it means we've found all the Winnipegs, | |
| * and thus all the PCI buses. | |
| */ | |
| if (i == rio_table_hdr->num_rio_dev) | |
| next_wpeg = 0; | |
| } while (next_wpeg != 0); | |
| } | |
| #endif | |
| static struct apic apic_summit = { | |
| .name = "summit", | |
| .probe = probe_summit, | |
| .acpi_madt_oem_check = summit_acpi_madt_oem_check, | |
| .apic_id_valid = default_apic_id_valid, | |
| .apic_id_registered = summit_apic_id_registered, | |
| .irq_delivery_mode = dest_LowestPrio, | |
| /* logical delivery broadcast to all CPUs: */ | |
| .irq_dest_mode = 1, | |
| .target_cpus = summit_target_cpus, | |
| .disable_esr = 1, | |
| .dest_logical = APIC_DEST_LOGICAL, | |
| .check_apicid_used = summit_check_apicid_used, | |
| .check_apicid_present = summit_check_apicid_present, | |
| .vector_allocation_domain = flat_vector_allocation_domain, | |
| .init_apic_ldr = summit_init_apic_ldr, | |
| .ioapic_phys_id_map = summit_ioapic_phys_id_map, | |
| .setup_apic_routing = summit_setup_apic_routing, | |
| .multi_timer_check = NULL, | |
| .cpu_present_to_apicid = summit_cpu_present_to_apicid, | |
| .apicid_to_cpu_present = summit_apicid_to_cpu_present, | |
| .setup_portio_remap = NULL, | |
| .check_phys_apicid_present = summit_check_phys_apicid_present, | |
| .enable_apic_mode = NULL, | |
| .phys_pkg_id = summit_phys_pkg_id, | |
| .mps_oem_check = summit_mps_oem_check, | |
| .get_apic_id = summit_get_apic_id, | |
| .set_apic_id = NULL, | |
| .apic_id_mask = 0xFF << 24, | |
| .cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and, | |
| .send_IPI_mask = summit_send_IPI_mask, | |
| .send_IPI_mask_allbutself = NULL, | |
| .send_IPI_allbutself = summit_send_IPI_allbutself, | |
| .send_IPI_all = summit_send_IPI_all, | |
| .send_IPI_self = default_send_IPI_self, | |
| .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW, | |
| .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, | |
| .wait_for_init_deassert = default_wait_for_init_deassert, | |
| .smp_callin_clear_local_apic = NULL, | |
| .inquire_remote_apic = default_inquire_remote_apic, | |
| .read = native_apic_mem_read, | |
| .write = native_apic_mem_write, | |
| .eoi_write = native_apic_mem_write, | |
| .icr_read = native_apic_icr_read, | |
| .icr_write = native_apic_icr_write, | |
| .wait_icr_idle = native_apic_wait_icr_idle, | |
| .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, | |
| .x86_32_early_logical_apicid = summit_early_logical_apicid, | |
| }; | |
| apic_driver(apic_summit); |