| /* | |
| * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE | |
| * Copyright 2003 Andi Kleen, SuSE Labs. | |
| * | |
| * [ NOTE: this mechanism is now deprecated in favor of the vDSO. ] | |
| * | |
| * Thanks to hpa@transmeta.com for some useful hint. | |
| * Special thanks to Ingo Molnar for his early experience with | |
| * a different vsyscall implementation for Linux/IA32 and for the name. | |
| * | |
| * vsyscall 1 is located at -10Mbyte, vsyscall 2 is located | |
| * at virtual address -10Mbyte+1024bytes etc... There are at max 4 | |
| * vsyscalls. One vsyscall can reserve more than 1 slot to avoid | |
| * jumping out of line if necessary. We cannot add more with this | |
| * mechanism because older kernels won't return -ENOSYS. | |
| * | |
| * Note: the concept clashes with user mode linux. UML users should | |
| * use the vDSO. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/time.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/timer.h> | |
| #include <linux/seqlock.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/sysctl.h> | |
| #include <linux/topology.h> | |
| #include <linux/timekeeper_internal.h> | |
| #include <linux/getcpu.h> | |
| #include <linux/cpu.h> | |
| #include <linux/smp.h> | |
| #include <linux/notifier.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/ratelimit.h> | |
| #include <asm/vsyscall.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/compat.h> | |
| #include <asm/page.h> | |
| #include <asm/unistd.h> | |
| #include <asm/fixmap.h> | |
| #include <asm/errno.h> | |
| #include <asm/io.h> | |
| #include <asm/segment.h> | |
| #include <asm/desc.h> | |
| #include <asm/topology.h> | |
| #include <asm/vgtod.h> | |
| #include <asm/traps.h> | |
| #define CREATE_TRACE_POINTS | |
| #include "vsyscall_trace.h" | |
| DEFINE_VVAR(int, vgetcpu_mode); | |
| DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data); | |
| static enum { EMULATE, NATIVE, NONE } vsyscall_mode = EMULATE; | |
| static int __init vsyscall_setup(char *str) | |
| { | |
| if (str) { | |
| if (!strcmp("emulate", str)) | |
| vsyscall_mode = EMULATE; | |
| else if (!strcmp("native", str)) | |
| vsyscall_mode = NATIVE; | |
| else if (!strcmp("none", str)) | |
| vsyscall_mode = NONE; | |
| else | |
| return -EINVAL; | |
| return 0; | |
| } | |
| return -EINVAL; | |
| } | |
| early_param("vsyscall", vsyscall_setup); | |
| void update_vsyscall_tz(void) | |
| { | |
| vsyscall_gtod_data.sys_tz = sys_tz; | |
| } | |
| void update_vsyscall(struct timekeeper *tk) | |
| { | |
| struct vsyscall_gtod_data *vdata = &vsyscall_gtod_data; | |
| write_seqcount_begin(&vdata->seq); | |
| /* copy vsyscall data */ | |
| vdata->clock.vclock_mode = tk->clock->archdata.vclock_mode; | |
| vdata->clock.cycle_last = tk->clock->cycle_last; | |
| vdata->clock.mask = tk->clock->mask; | |
| vdata->clock.mult = tk->mult; | |
| vdata->clock.shift = tk->shift; | |
| vdata->wall_time_sec = tk->xtime_sec; | |
| vdata->wall_time_snsec = tk->xtime_nsec; | |
| vdata->monotonic_time_sec = tk->xtime_sec | |
| + tk->wall_to_monotonic.tv_sec; | |
| vdata->monotonic_time_snsec = tk->xtime_nsec | |
| + (tk->wall_to_monotonic.tv_nsec | |
| << tk->shift); | |
| while (vdata->monotonic_time_snsec >= | |
| (((u64)NSEC_PER_SEC) << tk->shift)) { | |
| vdata->monotonic_time_snsec -= | |
| ((u64)NSEC_PER_SEC) << tk->shift; | |
| vdata->monotonic_time_sec++; | |
| } | |
| vdata->wall_time_coarse.tv_sec = tk->xtime_sec; | |
| vdata->wall_time_coarse.tv_nsec = (long)(tk->xtime_nsec >> tk->shift); | |
| vdata->monotonic_time_coarse = timespec_add(vdata->wall_time_coarse, | |
| tk->wall_to_monotonic); | |
| write_seqcount_end(&vdata->seq); | |
| } | |
| static void warn_bad_vsyscall(const char *level, struct pt_regs *regs, | |
| const char *message) | |
| { | |
| if (!show_unhandled_signals) | |
| return; | |
| pr_notice_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n", | |
| level, current->comm, task_pid_nr(current), | |
| message, regs->ip, regs->cs, | |
| regs->sp, regs->ax, regs->si, regs->di); | |
| } | |
| static int addr_to_vsyscall_nr(unsigned long addr) | |
| { | |
| int nr; | |
| if ((addr & ~0xC00UL) != VSYSCALL_START) | |
| return -EINVAL; | |
| nr = (addr & 0xC00UL) >> 10; | |
| if (nr >= 3) | |
| return -EINVAL; | |
| return nr; | |
| } | |
| static bool write_ok_or_segv(unsigned long ptr, size_t size) | |
| { | |
| /* | |
| * XXX: if access_ok, get_user, and put_user handled | |
| * sig_on_uaccess_error, this could go away. | |
| */ | |
| if (!access_ok(VERIFY_WRITE, (void __user *)ptr, size)) { | |
| siginfo_t info; | |
| struct thread_struct *thread = ¤t->thread; | |
| thread->error_code = 6; /* user fault, no page, write */ | |
| thread->cr2 = ptr; | |
| thread->trap_nr = X86_TRAP_PF; | |
| memset(&info, 0, sizeof(info)); | |
| info.si_signo = SIGSEGV; | |
| info.si_errno = 0; | |
| info.si_code = SEGV_MAPERR; | |
| info.si_addr = (void __user *)ptr; | |
| force_sig_info(SIGSEGV, &info, current); | |
| return false; | |
| } else { | |
| return true; | |
| } | |
| } | |
| bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) | |
| { | |
| struct task_struct *tsk; | |
| unsigned long caller; | |
| int vsyscall_nr, syscall_nr, tmp; | |
| int prev_sig_on_uaccess_error; | |
| long ret; | |
| /* | |
| * No point in checking CS -- the only way to get here is a user mode | |
| * trap to a high address, which means that we're in 64-bit user code. | |
| */ | |
| WARN_ON_ONCE(address != regs->ip); | |
| if (vsyscall_mode == NONE) { | |
| warn_bad_vsyscall(KERN_INFO, regs, | |
| "vsyscall attempted with vsyscall=none"); | |
| return false; | |
| } | |
| vsyscall_nr = addr_to_vsyscall_nr(address); | |
| trace_emulate_vsyscall(vsyscall_nr); | |
| if (vsyscall_nr < 0) { | |
| warn_bad_vsyscall(KERN_WARNING, regs, | |
| "misaligned vsyscall (exploit attempt or buggy program) -- look up the vsyscall kernel parameter if you need a workaround"); | |
| goto sigsegv; | |
| } | |
| if (get_user(caller, (unsigned long __user *)regs->sp) != 0) { | |
| warn_bad_vsyscall(KERN_WARNING, regs, | |
| "vsyscall with bad stack (exploit attempt?)"); | |
| goto sigsegv; | |
| } | |
| tsk = current; | |
| /* | |
| * Check for access_ok violations and find the syscall nr. | |
| * | |
| * NULL is a valid user pointer (in the access_ok sense) on 32-bit and | |
| * 64-bit, so we don't need to special-case it here. For all the | |
| * vsyscalls, NULL means "don't write anything" not "write it at | |
| * address 0". | |
| */ | |
| switch (vsyscall_nr) { | |
| case 0: | |
| if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) || | |
| !write_ok_or_segv(regs->si, sizeof(struct timezone))) { | |
| ret = -EFAULT; | |
| goto check_fault; | |
| } | |
| syscall_nr = __NR_gettimeofday; | |
| break; | |
| case 1: | |
| if (!write_ok_or_segv(regs->di, sizeof(time_t))) { | |
| ret = -EFAULT; | |
| goto check_fault; | |
| } | |
| syscall_nr = __NR_time; | |
| break; | |
| case 2: | |
| if (!write_ok_or_segv(regs->di, sizeof(unsigned)) || | |
| !write_ok_or_segv(regs->si, sizeof(unsigned))) { | |
| ret = -EFAULT; | |
| goto check_fault; | |
| } | |
| syscall_nr = __NR_getcpu; | |
| break; | |
| } | |
| /* | |
| * Handle seccomp. regs->ip must be the original value. | |
| * See seccomp_send_sigsys and Documentation/prctl/seccomp_filter.txt. | |
| * | |
| * We could optimize the seccomp disabled case, but performance | |
| * here doesn't matter. | |
| */ | |
| regs->orig_ax = syscall_nr; | |
| regs->ax = -ENOSYS; | |
| tmp = secure_computing(syscall_nr); | |
| if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) { | |
| warn_bad_vsyscall(KERN_DEBUG, regs, | |
| "seccomp tried to change syscall nr or ip"); | |
| do_exit(SIGSYS); | |
| } | |
| if (tmp) | |
| goto do_ret; /* skip requested */ | |
| /* | |
| * With a real vsyscall, page faults cause SIGSEGV. We want to | |
| * preserve that behavior to make writing exploits harder. | |
| */ | |
| prev_sig_on_uaccess_error = current_thread_info()->sig_on_uaccess_error; | |
| current_thread_info()->sig_on_uaccess_error = 1; | |
| ret = -EFAULT; | |
| switch (vsyscall_nr) { | |
| case 0: | |
| ret = sys_gettimeofday( | |
| (struct timeval __user *)regs->di, | |
| (struct timezone __user *)regs->si); | |
| break; | |
| case 1: | |
| ret = sys_time((time_t __user *)regs->di); | |
| break; | |
| case 2: | |
| ret = sys_getcpu((unsigned __user *)regs->di, | |
| (unsigned __user *)regs->si, | |
| NULL); | |
| break; | |
| } | |
| current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error; | |
| check_fault: | |
| if (ret == -EFAULT) { | |
| /* Bad news -- userspace fed a bad pointer to a vsyscall. */ | |
| warn_bad_vsyscall(KERN_INFO, regs, | |
| "vsyscall fault (exploit attempt?)"); | |
| /* | |
| * If we failed to generate a signal for any reason, | |
| * generate one here. (This should be impossible.) | |
| */ | |
| if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) && | |
| !sigismember(&tsk->pending.signal, SIGSEGV))) | |
| goto sigsegv; | |
| return true; /* Don't emulate the ret. */ | |
| } | |
| regs->ax = ret; | |
| do_ret: | |
| /* Emulate a ret instruction. */ | |
| regs->ip = caller; | |
| regs->sp += 8; | |
| return true; | |
| sigsegv: | |
| force_sig(SIGSEGV, current); | |
| return true; | |
| } | |
| /* | |
| * Assume __initcall executes before all user space. Hopefully kmod | |
| * doesn't violate that. We'll find out if it does. | |
| */ | |
| static void vsyscall_set_cpu(int cpu) | |
| { | |
| unsigned long d; | |
| unsigned long node = 0; | |
| #ifdef CONFIG_NUMA | |
| node = cpu_to_node(cpu); | |
| #endif | |
| if (cpu_has(&cpu_data(cpu), X86_FEATURE_RDTSCP)) | |
| write_rdtscp_aux((node << 12) | cpu); | |
| /* | |
| * Store cpu number in limit so that it can be loaded quickly | |
| * in user space in vgetcpu. (12 bits for the CPU and 8 bits for the node) | |
| */ | |
| d = 0x0f40000000000ULL; | |
| d |= cpu; | |
| d |= (node & 0xf) << 12; | |
| d |= (node >> 4) << 48; | |
| write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_PER_CPU, &d, DESCTYPE_S); | |
| } | |
| static void cpu_vsyscall_init(void *arg) | |
| { | |
| /* preemption should be already off */ | |
| vsyscall_set_cpu(raw_smp_processor_id()); | |
| } | |
| static int | |
| cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg) | |
| { | |
| long cpu = (long)arg; | |
| if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) | |
| smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 1); | |
| return NOTIFY_DONE; | |
| } | |
| void __init map_vsyscall(void) | |
| { | |
| extern char __vsyscall_page; | |
| unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page); | |
| extern char __vvar_page; | |
| unsigned long physaddr_vvar_page = __pa_symbol(&__vvar_page); | |
| __set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_vsyscall, | |
| vsyscall_mode == NATIVE | |
| ? PAGE_KERNEL_VSYSCALL | |
| : PAGE_KERNEL_VVAR); | |
| BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_FIRST_PAGE) != | |
| (unsigned long)VSYSCALL_START); | |
| __set_fixmap(VVAR_PAGE, physaddr_vvar_page, PAGE_KERNEL_VVAR); | |
| BUILD_BUG_ON((unsigned long)__fix_to_virt(VVAR_PAGE) != | |
| (unsigned long)VVAR_ADDRESS); | |
| } | |
| static int __init vsyscall_init(void) | |
| { | |
| BUG_ON(VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)); | |
| on_each_cpu(cpu_vsyscall_init, NULL, 1); | |
| /* notifier priority > KVM */ | |
| hotcpu_notifier(cpu_vsyscall_notifier, 30); | |
| return 0; | |
| } | |
| __initcall(vsyscall_init); |