| /* | |
| * Generic driver for memory-mapped GPIO controllers. | |
| * | |
| * Copyright 2008 MontaVista Software, Inc. | |
| * Copyright 2008,2010 Anton Vorontsov <cbouatmailru@gmail.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * ....``.```~~~~````.`.`.`.`.```````'',,,.........`````......`....... | |
| * ...`` ```````.. | |
| * ..The simplest form of a GPIO controller that the driver supports is`` | |
| * `.just a single "data" register, where GPIO state can be read and/or ` | |
| * `,..written. ,,..``~~~~ .....``.`.`.~~.```.`.........``````.``````` | |
| * ````````` | |
| ___ | |
| _/~~|___/~| . ```~~~~~~ ___/___\___ ,~.`.`.`.`````.~~...,,,,... | |
| __________|~$@~~~ %~ /o*o*o*o*o*o\ .. Implementing such a GPIO . | |
| o ` ~~~~\___/~~~~ ` controller in FPGA is ,.` | |
| `....trivial..'~`.```.``` | |
| * ``````` | |
| * .```````~~~~`..`.``.``. | |
| * . The driver supports `... ,..```.`~~~```````````````....````.``,, | |
| * . big-endian notation, just`. .. A bit more sophisticated controllers , | |
| * . register the device with -be`. .with a pair of set/clear-bit registers , | |
| * `.. suffix. ```~~`````....`.` . affecting the data register and the .` | |
| * ``.`.``...``` ```.. output pins are also supported.` | |
| * ^^ `````.`````````.,``~``~``~~`````` | |
| * . ^^ | |
| * ,..`.`.`...````````````......`.`.`.`.`.`..`.`.`.. | |
| * .. The expectation is that in at least some cases . ,-~~~-, | |
| * .this will be used with roll-your-own ASIC/FPGA .` \ / | |
| * .logic in Verilog or VHDL. ~~~`````````..`````~~` \ / | |
| * ..````````......``````````` \o_ | |
| * | | |
| * ^^ / \ | |
| * | |
| * ...`````~~`.....``.`..........``````.`.``.```........``. | |
| * ` 8, 16, 32 and 64 bits registers are supported, and``. | |
| * . the number of GPIOs is determined by the width of ~ | |
| * .. the registers. ,............```.`.`..`.`.~~~.`.`.`~ | |
| * `.......````.``` | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/err.h> | |
| #include <linux/bug.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/compiler.h> | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/log2.h> | |
| #include <linux/ioport.h> | |
| #include <linux/io.h> | |
| #include <linux/gpio.h> | |
| #include <linux/slab.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/mod_devicetable.h> | |
| #include <linux/basic_mmio_gpio.h> | |
| static void bgpio_write8(void __iomem *reg, unsigned long data) | |
| { | |
| writeb(data, reg); | |
| } | |
| static unsigned long bgpio_read8(void __iomem *reg) | |
| { | |
| return readb(reg); | |
| } | |
| static void bgpio_write16(void __iomem *reg, unsigned long data) | |
| { | |
| writew(data, reg); | |
| } | |
| static unsigned long bgpio_read16(void __iomem *reg) | |
| { | |
| return readw(reg); | |
| } | |
| static void bgpio_write32(void __iomem *reg, unsigned long data) | |
| { | |
| writel(data, reg); | |
| } | |
| static unsigned long bgpio_read32(void __iomem *reg) | |
| { | |
| return readl(reg); | |
| } | |
| #if BITS_PER_LONG >= 64 | |
| static void bgpio_write64(void __iomem *reg, unsigned long data) | |
| { | |
| writeq(data, reg); | |
| } | |
| static unsigned long bgpio_read64(void __iomem *reg) | |
| { | |
| return readq(reg); | |
| } | |
| #endif /* BITS_PER_LONG >= 64 */ | |
| static void bgpio_write16be(void __iomem *reg, unsigned long data) | |
| { | |
| iowrite16be(data, reg); | |
| } | |
| static unsigned long bgpio_read16be(void __iomem *reg) | |
| { | |
| return ioread16be(reg); | |
| } | |
| static void bgpio_write32be(void __iomem *reg, unsigned long data) | |
| { | |
| iowrite32be(data, reg); | |
| } | |
| static unsigned long bgpio_read32be(void __iomem *reg) | |
| { | |
| return ioread32be(reg); | |
| } | |
| static unsigned long bgpio_pin2mask(struct bgpio_chip *bgc, unsigned int pin) | |
| { | |
| return 1 << pin; | |
| } | |
| static unsigned long bgpio_pin2mask_be(struct bgpio_chip *bgc, | |
| unsigned int pin) | |
| { | |
| return 1 << (bgc->bits - 1 - pin); | |
| } | |
| static int bgpio_get(struct gpio_chip *gc, unsigned int gpio) | |
| { | |
| struct bgpio_chip *bgc = to_bgpio_chip(gc); | |
| return bgc->read_reg(bgc->reg_dat) & bgc->pin2mask(bgc, gpio); | |
| } | |
| static void bgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) | |
| { | |
| struct bgpio_chip *bgc = to_bgpio_chip(gc); | |
| unsigned long mask = bgc->pin2mask(bgc, gpio); | |
| unsigned long flags; | |
| spin_lock_irqsave(&bgc->lock, flags); | |
| if (val) | |
| bgc->data |= mask; | |
| else | |
| bgc->data &= ~mask; | |
| bgc->write_reg(bgc->reg_dat, bgc->data); | |
| spin_unlock_irqrestore(&bgc->lock, flags); | |
| } | |
| static void bgpio_set_with_clear(struct gpio_chip *gc, unsigned int gpio, | |
| int val) | |
| { | |
| struct bgpio_chip *bgc = to_bgpio_chip(gc); | |
| unsigned long mask = bgc->pin2mask(bgc, gpio); | |
| if (val) | |
| bgc->write_reg(bgc->reg_set, mask); | |
| else | |
| bgc->write_reg(bgc->reg_clr, mask); | |
| } | |
| static void bgpio_set_set(struct gpio_chip *gc, unsigned int gpio, int val) | |
| { | |
| struct bgpio_chip *bgc = to_bgpio_chip(gc); | |
| unsigned long mask = bgc->pin2mask(bgc, gpio); | |
| unsigned long flags; | |
| spin_lock_irqsave(&bgc->lock, flags); | |
| if (val) | |
| bgc->data |= mask; | |
| else | |
| bgc->data &= ~mask; | |
| bgc->write_reg(bgc->reg_set, bgc->data); | |
| spin_unlock_irqrestore(&bgc->lock, flags); | |
| } | |
| static int bgpio_simple_dir_in(struct gpio_chip *gc, unsigned int gpio) | |
| { | |
| return 0; | |
| } | |
| static int bgpio_simple_dir_out(struct gpio_chip *gc, unsigned int gpio, | |
| int val) | |
| { | |
| gc->set(gc, gpio, val); | |
| return 0; | |
| } | |
| static int bgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) | |
| { | |
| struct bgpio_chip *bgc = to_bgpio_chip(gc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&bgc->lock, flags); | |
| bgc->dir &= ~bgc->pin2mask(bgc, gpio); | |
| bgc->write_reg(bgc->reg_dir, bgc->dir); | |
| spin_unlock_irqrestore(&bgc->lock, flags); | |
| return 0; | |
| } | |
| static int bgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) | |
| { | |
| struct bgpio_chip *bgc = to_bgpio_chip(gc); | |
| unsigned long flags; | |
| gc->set(gc, gpio, val); | |
| spin_lock_irqsave(&bgc->lock, flags); | |
| bgc->dir |= bgc->pin2mask(bgc, gpio); | |
| bgc->write_reg(bgc->reg_dir, bgc->dir); | |
| spin_unlock_irqrestore(&bgc->lock, flags); | |
| return 0; | |
| } | |
| static int bgpio_dir_in_inv(struct gpio_chip *gc, unsigned int gpio) | |
| { | |
| struct bgpio_chip *bgc = to_bgpio_chip(gc); | |
| unsigned long flags; | |
| spin_lock_irqsave(&bgc->lock, flags); | |
| bgc->dir |= bgc->pin2mask(bgc, gpio); | |
| bgc->write_reg(bgc->reg_dir, bgc->dir); | |
| spin_unlock_irqrestore(&bgc->lock, flags); | |
| return 0; | |
| } | |
| static int bgpio_dir_out_inv(struct gpio_chip *gc, unsigned int gpio, int val) | |
| { | |
| struct bgpio_chip *bgc = to_bgpio_chip(gc); | |
| unsigned long flags; | |
| gc->set(gc, gpio, val); | |
| spin_lock_irqsave(&bgc->lock, flags); | |
| bgc->dir &= ~bgc->pin2mask(bgc, gpio); | |
| bgc->write_reg(bgc->reg_dir, bgc->dir); | |
| spin_unlock_irqrestore(&bgc->lock, flags); | |
| return 0; | |
| } | |
| static int bgpio_setup_accessors(struct device *dev, | |
| struct bgpio_chip *bgc, | |
| bool bit_be, | |
| bool byte_be) | |
| { | |
| switch (bgc->bits) { | |
| case 8: | |
| bgc->read_reg = bgpio_read8; | |
| bgc->write_reg = bgpio_write8; | |
| break; | |
| case 16: | |
| if (byte_be) { | |
| bgc->read_reg = bgpio_read16be; | |
| bgc->write_reg = bgpio_write16be; | |
| } else { | |
| bgc->read_reg = bgpio_read16; | |
| bgc->write_reg = bgpio_write16; | |
| } | |
| break; | |
| case 32: | |
| if (byte_be) { | |
| bgc->read_reg = bgpio_read32be; | |
| bgc->write_reg = bgpio_write32be; | |
| } else { | |
| bgc->read_reg = bgpio_read32; | |
| bgc->write_reg = bgpio_write32; | |
| } | |
| break; | |
| #if BITS_PER_LONG >= 64 | |
| case 64: | |
| if (byte_be) { | |
| dev_err(dev, | |
| "64 bit big endian byte order unsupported\n"); | |
| return -EINVAL; | |
| } else { | |
| bgc->read_reg = bgpio_read64; | |
| bgc->write_reg = bgpio_write64; | |
| } | |
| break; | |
| #endif /* BITS_PER_LONG >= 64 */ | |
| default: | |
| dev_err(dev, "unsupported data width %u bits\n", bgc->bits); | |
| return -EINVAL; | |
| } | |
| bgc->pin2mask = bit_be ? bgpio_pin2mask_be : bgpio_pin2mask; | |
| return 0; | |
| } | |
| /* | |
| * Create the device and allocate the resources. For setting GPIO's there are | |
| * three supported configurations: | |
| * | |
| * - single input/output register resource (named "dat"). | |
| * - set/clear pair (named "set" and "clr"). | |
| * - single output register resource and single input resource ("set" and | |
| * dat"). | |
| * | |
| * For the single output register, this drives a 1 by setting a bit and a zero | |
| * by clearing a bit. For the set clr pair, this drives a 1 by setting a bit | |
| * in the set register and clears it by setting a bit in the clear register. | |
| * The configuration is detected by which resources are present. | |
| * | |
| * For setting the GPIO direction, there are three supported configurations: | |
| * | |
| * - simple bidirection GPIO that requires no configuration. | |
| * - an output direction register (named "dirout") where a 1 bit | |
| * indicates the GPIO is an output. | |
| * - an input direction register (named "dirin") where a 1 bit indicates | |
| * the GPIO is an input. | |
| */ | |
| static int bgpio_setup_io(struct bgpio_chip *bgc, | |
| void __iomem *dat, | |
| void __iomem *set, | |
| void __iomem *clr) | |
| { | |
| bgc->reg_dat = dat; | |
| if (!bgc->reg_dat) | |
| return -EINVAL; | |
| if (set && clr) { | |
| bgc->reg_set = set; | |
| bgc->reg_clr = clr; | |
| bgc->gc.set = bgpio_set_with_clear; | |
| } else if (set && !clr) { | |
| bgc->reg_set = set; | |
| bgc->gc.set = bgpio_set_set; | |
| } else { | |
| bgc->gc.set = bgpio_set; | |
| } | |
| bgc->gc.get = bgpio_get; | |
| return 0; | |
| } | |
| static int bgpio_setup_direction(struct bgpio_chip *bgc, | |
| void __iomem *dirout, | |
| void __iomem *dirin) | |
| { | |
| if (dirout && dirin) { | |
| return -EINVAL; | |
| } else if (dirout) { | |
| bgc->reg_dir = dirout; | |
| bgc->gc.direction_output = bgpio_dir_out; | |
| bgc->gc.direction_input = bgpio_dir_in; | |
| } else if (dirin) { | |
| bgc->reg_dir = dirin; | |
| bgc->gc.direction_output = bgpio_dir_out_inv; | |
| bgc->gc.direction_input = bgpio_dir_in_inv; | |
| } else { | |
| bgc->gc.direction_output = bgpio_simple_dir_out; | |
| bgc->gc.direction_input = bgpio_simple_dir_in; | |
| } | |
| return 0; | |
| } | |
| int bgpio_remove(struct bgpio_chip *bgc) | |
| { | |
| return gpiochip_remove(&bgc->gc); | |
| } | |
| EXPORT_SYMBOL_GPL(bgpio_remove); | |
| int bgpio_init(struct bgpio_chip *bgc, struct device *dev, | |
| unsigned long sz, void __iomem *dat, void __iomem *set, | |
| void __iomem *clr, void __iomem *dirout, void __iomem *dirin, | |
| unsigned long flags) | |
| { | |
| int ret; | |
| if (!is_power_of_2(sz)) | |
| return -EINVAL; | |
| bgc->bits = sz * 8; | |
| if (bgc->bits > BITS_PER_LONG) | |
| return -EINVAL; | |
| spin_lock_init(&bgc->lock); | |
| bgc->gc.dev = dev; | |
| bgc->gc.label = dev_name(dev); | |
| bgc->gc.base = -1; | |
| bgc->gc.ngpio = bgc->bits; | |
| ret = bgpio_setup_io(bgc, dat, set, clr); | |
| if (ret) | |
| return ret; | |
| ret = bgpio_setup_accessors(dev, bgc, flags & BGPIOF_BIG_ENDIAN, | |
| flags & BGPIOF_BIG_ENDIAN_BYTE_ORDER); | |
| if (ret) | |
| return ret; | |
| ret = bgpio_setup_direction(bgc, dirout, dirin); | |
| if (ret) | |
| return ret; | |
| bgc->data = bgc->read_reg(bgc->reg_dat); | |
| if (bgc->gc.set == bgpio_set_set && | |
| !(flags & BGPIOF_UNREADABLE_REG_SET)) | |
| bgc->data = bgc->read_reg(bgc->reg_set); | |
| if (bgc->reg_dir && !(flags & BGPIOF_UNREADABLE_REG_DIR)) | |
| bgc->dir = bgc->read_reg(bgc->reg_dir); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(bgpio_init); | |
| #ifdef CONFIG_GPIO_GENERIC_PLATFORM | |
| static void __iomem *bgpio_map(struct platform_device *pdev, | |
| const char *name, | |
| resource_size_t sane_sz, | |
| int *err) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct resource *r; | |
| resource_size_t start; | |
| resource_size_t sz; | |
| void __iomem *ret; | |
| *err = 0; | |
| r = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); | |
| if (!r) | |
| return NULL; | |
| sz = resource_size(r); | |
| if (sz != sane_sz) { | |
| *err = -EINVAL; | |
| return NULL; | |
| } | |
| start = r->start; | |
| if (!devm_request_mem_region(dev, start, sz, r->name)) { | |
| *err = -EBUSY; | |
| return NULL; | |
| } | |
| ret = devm_ioremap(dev, start, sz); | |
| if (!ret) { | |
| *err = -ENOMEM; | |
| return NULL; | |
| } | |
| return ret; | |
| } | |
| static int bgpio_pdev_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct resource *r; | |
| void __iomem *dat; | |
| void __iomem *set; | |
| void __iomem *clr; | |
| void __iomem *dirout; | |
| void __iomem *dirin; | |
| unsigned long sz; | |
| unsigned long flags = 0; | |
| int err; | |
| struct bgpio_chip *bgc; | |
| struct bgpio_pdata *pdata = dev_get_platdata(dev); | |
| r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat"); | |
| if (!r) | |
| return -EINVAL; | |
| sz = resource_size(r); | |
| dat = bgpio_map(pdev, "dat", sz, &err); | |
| if (!dat) | |
| return err ? err : -EINVAL; | |
| set = bgpio_map(pdev, "set", sz, &err); | |
| if (err) | |
| return err; | |
| clr = bgpio_map(pdev, "clr", sz, &err); | |
| if (err) | |
| return err; | |
| dirout = bgpio_map(pdev, "dirout", sz, &err); | |
| if (err) | |
| return err; | |
| dirin = bgpio_map(pdev, "dirin", sz, &err); | |
| if (err) | |
| return err; | |
| if (!strcmp(platform_get_device_id(pdev)->name, "basic-mmio-gpio-be")) | |
| flags |= BGPIOF_BIG_ENDIAN; | |
| bgc = devm_kzalloc(&pdev->dev, sizeof(*bgc), GFP_KERNEL); | |
| if (!bgc) | |
| return -ENOMEM; | |
| err = bgpio_init(bgc, dev, sz, dat, set, clr, dirout, dirin, flags); | |
| if (err) | |
| return err; | |
| if (pdata) { | |
| bgc->gc.base = pdata->base; | |
| if (pdata->ngpio > 0) | |
| bgc->gc.ngpio = pdata->ngpio; | |
| } | |
| platform_set_drvdata(pdev, bgc); | |
| return gpiochip_add(&bgc->gc); | |
| } | |
| static int bgpio_pdev_remove(struct platform_device *pdev) | |
| { | |
| struct bgpio_chip *bgc = platform_get_drvdata(pdev); | |
| return bgpio_remove(bgc); | |
| } | |
| static const struct platform_device_id bgpio_id_table[] = { | |
| { "basic-mmio-gpio", }, | |
| { "basic-mmio-gpio-be", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(platform, bgpio_id_table); | |
| static struct platform_driver bgpio_driver = { | |
| .driver = { | |
| .name = "basic-mmio-gpio", | |
| }, | |
| .id_table = bgpio_id_table, | |
| .probe = bgpio_pdev_probe, | |
| .remove = bgpio_pdev_remove, | |
| }; | |
| module_platform_driver(bgpio_driver); | |
| #endif /* CONFIG_GPIO_GENERIC_PLATFORM */ | |
| MODULE_DESCRIPTION("Driver for basic memory-mapped GPIO controllers"); | |
| MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>"); | |
| MODULE_LICENSE("GPL"); |