| /* | |
| * V4L2 Driver for i.MX3x camera host | |
| * | |
| * Copyright (C) 2008 | |
| * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/videodev2.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/sched.h> | |
| #include <linux/dma/ipu-dma.h> | |
| #include <media/v4l2-common.h> | |
| #include <media/v4l2-dev.h> | |
| #include <media/videobuf2-dma-contig.h> | |
| #include <media/soc_camera.h> | |
| #include <media/soc_mediabus.h> | |
| #include <linux/platform_data/camera-mx3.h> | |
| #include <linux/platform_data/dma-imx.h> | |
| #define MX3_CAM_DRV_NAME "mx3-camera" | |
| /* CMOS Sensor Interface Registers */ | |
| #define CSI_REG_START 0x60 | |
| #define CSI_SENS_CONF (0x60 - CSI_REG_START) | |
| #define CSI_SENS_FRM_SIZE (0x64 - CSI_REG_START) | |
| #define CSI_ACT_FRM_SIZE (0x68 - CSI_REG_START) | |
| #define CSI_OUT_FRM_CTRL (0x6C - CSI_REG_START) | |
| #define CSI_TST_CTRL (0x70 - CSI_REG_START) | |
| #define CSI_CCIR_CODE_1 (0x74 - CSI_REG_START) | |
| #define CSI_CCIR_CODE_2 (0x78 - CSI_REG_START) | |
| #define CSI_CCIR_CODE_3 (0x7C - CSI_REG_START) | |
| #define CSI_FLASH_STROBE_1 (0x80 - CSI_REG_START) | |
| #define CSI_FLASH_STROBE_2 (0x84 - CSI_REG_START) | |
| #define CSI_SENS_CONF_VSYNC_POL_SHIFT 0 | |
| #define CSI_SENS_CONF_HSYNC_POL_SHIFT 1 | |
| #define CSI_SENS_CONF_DATA_POL_SHIFT 2 | |
| #define CSI_SENS_CONF_PIX_CLK_POL_SHIFT 3 | |
| #define CSI_SENS_CONF_SENS_PRTCL_SHIFT 4 | |
| #define CSI_SENS_CONF_SENS_CLKSRC_SHIFT 7 | |
| #define CSI_SENS_CONF_DATA_FMT_SHIFT 8 | |
| #define CSI_SENS_CONF_DATA_WIDTH_SHIFT 10 | |
| #define CSI_SENS_CONF_EXT_VSYNC_SHIFT 15 | |
| #define CSI_SENS_CONF_DIVRATIO_SHIFT 16 | |
| #define CSI_SENS_CONF_DATA_FMT_RGB_YUV444 (0UL << CSI_SENS_CONF_DATA_FMT_SHIFT) | |
| #define CSI_SENS_CONF_DATA_FMT_YUV422 (2UL << CSI_SENS_CONF_DATA_FMT_SHIFT) | |
| #define CSI_SENS_CONF_DATA_FMT_BAYER (3UL << CSI_SENS_CONF_DATA_FMT_SHIFT) | |
| #define MAX_VIDEO_MEM 16 | |
| struct mx3_camera_buffer { | |
| /* common v4l buffer stuff -- must be first */ | |
| struct vb2_buffer vb; | |
| struct list_head queue; | |
| /* One descriptot per scatterlist (per frame) */ | |
| struct dma_async_tx_descriptor *txd; | |
| /* We have to "build" a scatterlist ourselves - one element per frame */ | |
| struct scatterlist sg; | |
| }; | |
| /** | |
| * struct mx3_camera_dev - i.MX3x camera (CSI) object | |
| * @dev: camera device, to which the coherent buffer is attached | |
| * @icd: currently attached camera sensor | |
| * @clk: pointer to clock | |
| * @base: remapped register base address | |
| * @pdata: platform data | |
| * @platform_flags: platform flags | |
| * @mclk: master clock frequency in Hz | |
| * @capture: list of capture videobuffers | |
| * @lock: protects video buffer lists | |
| * @active: active video buffer | |
| * @idmac_channel: array of pointers to IPU DMAC DMA channels | |
| * @soc_host: embedded soc_host object | |
| */ | |
| struct mx3_camera_dev { | |
| /* | |
| * i.MX3x is only supposed to handle one camera on its Camera Sensor | |
| * Interface. If anyone ever builds hardware to enable more than one | |
| * camera _simultaneously_, they will have to modify this driver too | |
| */ | |
| struct clk *clk; | |
| void __iomem *base; | |
| struct mx3_camera_pdata *pdata; | |
| unsigned long platform_flags; | |
| unsigned long mclk; | |
| u16 width_flags; /* max 15 bits */ | |
| struct list_head capture; | |
| spinlock_t lock; /* Protects video buffer lists */ | |
| struct mx3_camera_buffer *active; | |
| size_t buf_total; | |
| struct vb2_alloc_ctx *alloc_ctx; | |
| enum v4l2_field field; | |
| int sequence; | |
| /* IDMAC / dmaengine interface */ | |
| struct idmac_channel *idmac_channel[1]; /* We need one channel */ | |
| struct soc_camera_host soc_host; | |
| }; | |
| struct dma_chan_request { | |
| struct mx3_camera_dev *mx3_cam; | |
| enum ipu_channel id; | |
| }; | |
| static u32 csi_reg_read(struct mx3_camera_dev *mx3, off_t reg) | |
| { | |
| return __raw_readl(mx3->base + reg); | |
| } | |
| static void csi_reg_write(struct mx3_camera_dev *mx3, u32 value, off_t reg) | |
| { | |
| __raw_writel(value, mx3->base + reg); | |
| } | |
| static struct mx3_camera_buffer *to_mx3_vb(struct vb2_buffer *vb) | |
| { | |
| return container_of(vb, struct mx3_camera_buffer, vb); | |
| } | |
| /* Called from the IPU IDMAC ISR */ | |
| static void mx3_cam_dma_done(void *arg) | |
| { | |
| struct idmac_tx_desc *desc = to_tx_desc(arg); | |
| struct dma_chan *chan = desc->txd.chan; | |
| struct idmac_channel *ichannel = to_idmac_chan(chan); | |
| struct mx3_camera_dev *mx3_cam = ichannel->client; | |
| dev_dbg(chan->device->dev, "callback cookie %d, active DMA 0x%08x\n", | |
| desc->txd.cookie, mx3_cam->active ? sg_dma_address(&mx3_cam->active->sg) : 0); | |
| spin_lock(&mx3_cam->lock); | |
| if (mx3_cam->active) { | |
| struct vb2_buffer *vb = &mx3_cam->active->vb; | |
| struct mx3_camera_buffer *buf = to_mx3_vb(vb); | |
| list_del_init(&buf->queue); | |
| v4l2_get_timestamp(&vb->v4l2_buf.timestamp); | |
| vb->v4l2_buf.field = mx3_cam->field; | |
| vb->v4l2_buf.sequence = mx3_cam->sequence++; | |
| vb2_buffer_done(vb, VB2_BUF_STATE_DONE); | |
| } | |
| if (list_empty(&mx3_cam->capture)) { | |
| mx3_cam->active = NULL; | |
| spin_unlock(&mx3_cam->lock); | |
| /* | |
| * stop capture - without further buffers IPU_CHA_BUF0_RDY will | |
| * not get updated | |
| */ | |
| return; | |
| } | |
| mx3_cam->active = list_entry(mx3_cam->capture.next, | |
| struct mx3_camera_buffer, queue); | |
| spin_unlock(&mx3_cam->lock); | |
| } | |
| /* | |
| * Videobuf operations | |
| */ | |
| /* | |
| * Calculate the __buffer__ (not data) size and number of buffers. | |
| */ | |
| static int mx3_videobuf_setup(struct vb2_queue *vq, | |
| const struct v4l2_format *fmt, | |
| unsigned int *count, unsigned int *num_planes, | |
| unsigned int sizes[], void *alloc_ctxs[]) | |
| { | |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vq); | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| if (!mx3_cam->idmac_channel[0]) | |
| return -EINVAL; | |
| if (fmt) { | |
| const struct soc_camera_format_xlate *xlate = soc_camera_xlate_by_fourcc(icd, | |
| fmt->fmt.pix.pixelformat); | |
| unsigned int bytes_per_line; | |
| int ret; | |
| if (!xlate) | |
| return -EINVAL; | |
| ret = soc_mbus_bytes_per_line(fmt->fmt.pix.width, | |
| xlate->host_fmt); | |
| if (ret < 0) | |
| return ret; | |
| bytes_per_line = max_t(u32, fmt->fmt.pix.bytesperline, ret); | |
| ret = soc_mbus_image_size(xlate->host_fmt, bytes_per_line, | |
| fmt->fmt.pix.height); | |
| if (ret < 0) | |
| return ret; | |
| sizes[0] = max_t(u32, fmt->fmt.pix.sizeimage, ret); | |
| } else { | |
| /* Called from VIDIOC_REQBUFS or in compatibility mode */ | |
| sizes[0] = icd->sizeimage; | |
| } | |
| alloc_ctxs[0] = mx3_cam->alloc_ctx; | |
| if (!vq->num_buffers) | |
| mx3_cam->sequence = 0; | |
| if (!*count) | |
| *count = 2; | |
| /* If *num_planes != 0, we have already verified *count. */ | |
| if (!*num_planes && | |
| sizes[0] * *count + mx3_cam->buf_total > MAX_VIDEO_MEM * 1024 * 1024) | |
| *count = (MAX_VIDEO_MEM * 1024 * 1024 - mx3_cam->buf_total) / | |
| sizes[0]; | |
| *num_planes = 1; | |
| return 0; | |
| } | |
| static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc) | |
| { | |
| /* Add more formats as need arises and test possibilities appear... */ | |
| switch (fourcc) { | |
| case V4L2_PIX_FMT_RGB24: | |
| return IPU_PIX_FMT_RGB24; | |
| case V4L2_PIX_FMT_UYVY: | |
| case V4L2_PIX_FMT_RGB565: | |
| default: | |
| return IPU_PIX_FMT_GENERIC; | |
| } | |
| } | |
| static void mx3_videobuf_queue(struct vb2_buffer *vb) | |
| { | |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct mx3_camera_buffer *buf = to_mx3_vb(vb); | |
| struct scatterlist *sg = &buf->sg; | |
| struct dma_async_tx_descriptor *txd; | |
| struct idmac_channel *ichan = mx3_cam->idmac_channel[0]; | |
| struct idmac_video_param *video = &ichan->params.video; | |
| const struct soc_mbus_pixelfmt *host_fmt = icd->current_fmt->host_fmt; | |
| dma_cookie_t cookie; | |
| size_t new_size; | |
| new_size = icd->sizeimage; | |
| if (vb2_plane_size(vb, 0) < new_size) { | |
| dev_err(icd->parent, "Buffer #%d too small (%lu < %zu)\n", | |
| vb->v4l2_buf.index, vb2_plane_size(vb, 0), new_size); | |
| goto error; | |
| } | |
| if (!buf->txd) { | |
| sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0); | |
| sg_dma_len(sg) = new_size; | |
| txd = dmaengine_prep_slave_sg( | |
| &ichan->dma_chan, sg, 1, DMA_DEV_TO_MEM, | |
| DMA_PREP_INTERRUPT); | |
| if (!txd) | |
| goto error; | |
| txd->callback_param = txd; | |
| txd->callback = mx3_cam_dma_done; | |
| buf->txd = txd; | |
| } else { | |
| txd = buf->txd; | |
| } | |
| vb2_set_plane_payload(vb, 0, new_size); | |
| /* This is the configuration of one sg-element */ | |
| video->out_pixel_fmt = fourcc_to_ipu_pix(host_fmt->fourcc); | |
| if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) { | |
| /* | |
| * If the IPU DMA channel is configured to transfer generic | |
| * 8-bit data, we have to set up the geometry parameters | |
| * correctly, according to the current pixel format. The DMA | |
| * horizontal parameters in this case are expressed in bytes, | |
| * not in pixels. | |
| */ | |
| video->out_width = icd->bytesperline; | |
| video->out_height = icd->user_height; | |
| video->out_stride = icd->bytesperline; | |
| } else { | |
| /* | |
| * For IPU known formats the pixel unit will be managed | |
| * successfully by the IPU code | |
| */ | |
| video->out_width = icd->user_width; | |
| video->out_height = icd->user_height; | |
| video->out_stride = icd->user_width; | |
| } | |
| #ifdef DEBUG | |
| /* helps to see what DMA actually has written */ | |
| if (vb2_plane_vaddr(vb, 0)) | |
| memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0)); | |
| #endif | |
| spin_lock_irq(&mx3_cam->lock); | |
| list_add_tail(&buf->queue, &mx3_cam->capture); | |
| if (!mx3_cam->active) | |
| mx3_cam->active = buf; | |
| spin_unlock_irq(&mx3_cam->lock); | |
| cookie = txd->tx_submit(txd); | |
| dev_dbg(icd->parent, "Submitted cookie %d DMA 0x%08x\n", | |
| cookie, sg_dma_address(&buf->sg)); | |
| if (cookie >= 0) | |
| return; | |
| spin_lock_irq(&mx3_cam->lock); | |
| /* Submit error */ | |
| list_del_init(&buf->queue); | |
| if (mx3_cam->active == buf) | |
| mx3_cam->active = NULL; | |
| spin_unlock_irq(&mx3_cam->lock); | |
| error: | |
| vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); | |
| } | |
| static void mx3_videobuf_release(struct vb2_buffer *vb) | |
| { | |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct mx3_camera_buffer *buf = to_mx3_vb(vb); | |
| struct dma_async_tx_descriptor *txd = buf->txd; | |
| unsigned long flags; | |
| dev_dbg(icd->parent, | |
| "Release%s DMA 0x%08x, queue %sempty\n", | |
| mx3_cam->active == buf ? " active" : "", sg_dma_address(&buf->sg), | |
| list_empty(&buf->queue) ? "" : "not "); | |
| spin_lock_irqsave(&mx3_cam->lock, flags); | |
| if (mx3_cam->active == buf) | |
| mx3_cam->active = NULL; | |
| /* Doesn't hurt also if the list is empty */ | |
| list_del_init(&buf->queue); | |
| if (txd) { | |
| buf->txd = NULL; | |
| if (mx3_cam->idmac_channel[0]) | |
| async_tx_ack(txd); | |
| } | |
| spin_unlock_irqrestore(&mx3_cam->lock, flags); | |
| mx3_cam->buf_total -= vb2_plane_size(vb, 0); | |
| } | |
| static int mx3_videobuf_init(struct vb2_buffer *vb) | |
| { | |
| struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct mx3_camera_buffer *buf = to_mx3_vb(vb); | |
| if (!buf->txd) { | |
| /* This is for locking debugging only */ | |
| INIT_LIST_HEAD(&buf->queue); | |
| sg_init_table(&buf->sg, 1); | |
| mx3_cam->buf_total += vb2_plane_size(vb, 0); | |
| } | |
| return 0; | |
| } | |
| static int mx3_stop_streaming(struct vb2_queue *q) | |
| { | |
| struct soc_camera_device *icd = soc_camera_from_vb2q(q); | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct idmac_channel *ichan = mx3_cam->idmac_channel[0]; | |
| struct mx3_camera_buffer *buf, *tmp; | |
| unsigned long flags; | |
| if (ichan) { | |
| struct dma_chan *chan = &ichan->dma_chan; | |
| chan->device->device_control(chan, DMA_PAUSE, 0); | |
| } | |
| spin_lock_irqsave(&mx3_cam->lock, flags); | |
| mx3_cam->active = NULL; | |
| list_for_each_entry_safe(buf, tmp, &mx3_cam->capture, queue) { | |
| list_del_init(&buf->queue); | |
| vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); | |
| } | |
| spin_unlock_irqrestore(&mx3_cam->lock, flags); | |
| return 0; | |
| } | |
| static struct vb2_ops mx3_videobuf_ops = { | |
| .queue_setup = mx3_videobuf_setup, | |
| .buf_queue = mx3_videobuf_queue, | |
| .buf_cleanup = mx3_videobuf_release, | |
| .buf_init = mx3_videobuf_init, | |
| .wait_prepare = soc_camera_unlock, | |
| .wait_finish = soc_camera_lock, | |
| .stop_streaming = mx3_stop_streaming, | |
| }; | |
| static int mx3_camera_init_videobuf(struct vb2_queue *q, | |
| struct soc_camera_device *icd) | |
| { | |
| q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; | |
| q->io_modes = VB2_MMAP | VB2_USERPTR; | |
| q->drv_priv = icd; | |
| q->ops = &mx3_videobuf_ops; | |
| q->mem_ops = &vb2_dma_contig_memops; | |
| q->buf_struct_size = sizeof(struct mx3_camera_buffer); | |
| q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; | |
| return vb2_queue_init(q); | |
| } | |
| /* First part of ipu_csi_init_interface() */ | |
| static void mx3_camera_activate(struct mx3_camera_dev *mx3_cam) | |
| { | |
| u32 conf; | |
| long rate; | |
| /* Set default size: ipu_csi_set_window_size() */ | |
| csi_reg_write(mx3_cam, (640 - 1) | ((480 - 1) << 16), CSI_ACT_FRM_SIZE); | |
| /* ...and position to 0:0: ipu_csi_set_window_pos() */ | |
| conf = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000; | |
| csi_reg_write(mx3_cam, conf, CSI_OUT_FRM_CTRL); | |
| /* We use only gated clock synchronisation mode so far */ | |
| conf = 0 << CSI_SENS_CONF_SENS_PRTCL_SHIFT; | |
| /* Set generic data, platform-biggest bus-width */ | |
| conf |= CSI_SENS_CONF_DATA_FMT_BAYER; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15) | |
| conf |= 3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT; | |
| else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10) | |
| conf |= 2 << CSI_SENS_CONF_DATA_WIDTH_SHIFT; | |
| else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8) | |
| conf |= 1 << CSI_SENS_CONF_DATA_WIDTH_SHIFT; | |
| else/* if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)*/ | |
| conf |= 0 << CSI_SENS_CONF_DATA_WIDTH_SHIFT; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_CLK_SRC) | |
| conf |= 1 << CSI_SENS_CONF_SENS_CLKSRC_SHIFT; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_EXT_VSYNC) | |
| conf |= 1 << CSI_SENS_CONF_EXT_VSYNC_SHIFT; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_DP) | |
| conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_PCP) | |
| conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_HSP) | |
| conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_VSP) | |
| conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT; | |
| /* ipu_csi_init_interface() */ | |
| csi_reg_write(mx3_cam, conf, CSI_SENS_CONF); | |
| clk_prepare_enable(mx3_cam->clk); | |
| rate = clk_round_rate(mx3_cam->clk, mx3_cam->mclk); | |
| dev_dbg(mx3_cam->soc_host.v4l2_dev.dev, "Set SENS_CONF to %x, rate %ld\n", conf, rate); | |
| if (rate) | |
| clk_set_rate(mx3_cam->clk, rate); | |
| } | |
| static int mx3_camera_add_device(struct soc_camera_device *icd) | |
| { | |
| dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n", | |
| icd->devnum); | |
| return 0; | |
| } | |
| static void mx3_camera_remove_device(struct soc_camera_device *icd) | |
| { | |
| dev_info(icd->parent, "MX3 Camera driver detached from camera %d\n", | |
| icd->devnum); | |
| } | |
| /* Called with .host_lock held */ | |
| static int mx3_camera_clock_start(struct soc_camera_host *ici) | |
| { | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| mx3_camera_activate(mx3_cam); | |
| mx3_cam->buf_total = 0; | |
| return 0; | |
| } | |
| /* Called with .host_lock held */ | |
| static void mx3_camera_clock_stop(struct soc_camera_host *ici) | |
| { | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct idmac_channel **ichan = &mx3_cam->idmac_channel[0]; | |
| if (*ichan) { | |
| dma_release_channel(&(*ichan)->dma_chan); | |
| *ichan = NULL; | |
| } | |
| clk_disable_unprepare(mx3_cam->clk); | |
| } | |
| static int test_platform_param(struct mx3_camera_dev *mx3_cam, | |
| unsigned char buswidth, unsigned long *flags) | |
| { | |
| /* | |
| * If requested data width is supported by the platform, use it or any | |
| * possible lower value - i.MX31 is smart enough to shift bits | |
| */ | |
| if (buswidth > fls(mx3_cam->width_flags)) | |
| return -EINVAL; | |
| /* | |
| * Platform specified synchronization and pixel clock polarities are | |
| * only a recommendation and are only used during probing. MX3x | |
| * camera interface only works in master mode, i.e., uses HSYNC and | |
| * VSYNC signals from the sensor | |
| */ | |
| *flags = V4L2_MBUS_MASTER | | |
| V4L2_MBUS_HSYNC_ACTIVE_HIGH | | |
| V4L2_MBUS_HSYNC_ACTIVE_LOW | | |
| V4L2_MBUS_VSYNC_ACTIVE_HIGH | | |
| V4L2_MBUS_VSYNC_ACTIVE_LOW | | |
| V4L2_MBUS_PCLK_SAMPLE_RISING | | |
| V4L2_MBUS_PCLK_SAMPLE_FALLING | | |
| V4L2_MBUS_DATA_ACTIVE_HIGH | | |
| V4L2_MBUS_DATA_ACTIVE_LOW; | |
| return 0; | |
| } | |
| static int mx3_camera_try_bus_param(struct soc_camera_device *icd, | |
| const unsigned int depth) | |
| { | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; | |
| unsigned long bus_flags, common_flags; | |
| int ret = test_platform_param(mx3_cam, depth, &bus_flags); | |
| dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret); | |
| if (ret < 0) | |
| return ret; | |
| ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg); | |
| if (!ret) { | |
| common_flags = soc_mbus_config_compatible(&cfg, | |
| bus_flags); | |
| if (!common_flags) { | |
| dev_warn(icd->parent, | |
| "Flags incompatible: camera 0x%x, host 0x%lx\n", | |
| cfg.flags, bus_flags); | |
| return -EINVAL; | |
| } | |
| } else if (ret != -ENOIOCTLCMD) { | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static bool chan_filter(struct dma_chan *chan, void *arg) | |
| { | |
| struct dma_chan_request *rq = arg; | |
| struct mx3_camera_pdata *pdata; | |
| if (!imx_dma_is_ipu(chan)) | |
| return false; | |
| if (!rq) | |
| return false; | |
| pdata = rq->mx3_cam->soc_host.v4l2_dev.dev->platform_data; | |
| return rq->id == chan->chan_id && | |
| pdata->dma_dev == chan->device->dev; | |
| } | |
| static const struct soc_mbus_pixelfmt mx3_camera_formats[] = { | |
| { | |
| .fourcc = V4L2_PIX_FMT_SBGGR8, | |
| .name = "Bayer BGGR (sRGB) 8 bit", | |
| .bits_per_sample = 8, | |
| .packing = SOC_MBUS_PACKING_NONE, | |
| .order = SOC_MBUS_ORDER_LE, | |
| .layout = SOC_MBUS_LAYOUT_PACKED, | |
| }, { | |
| .fourcc = V4L2_PIX_FMT_GREY, | |
| .name = "Monochrome 8 bit", | |
| .bits_per_sample = 8, | |
| .packing = SOC_MBUS_PACKING_NONE, | |
| .order = SOC_MBUS_ORDER_LE, | |
| .layout = SOC_MBUS_LAYOUT_PACKED, | |
| }, | |
| }; | |
| /* This will be corrected as we get more formats */ | |
| static bool mx3_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt) | |
| { | |
| return fmt->packing == SOC_MBUS_PACKING_NONE || | |
| (fmt->bits_per_sample == 8 && | |
| fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) || | |
| (fmt->bits_per_sample > 8 && | |
| fmt->packing == SOC_MBUS_PACKING_EXTEND16); | |
| } | |
| static int mx3_camera_get_formats(struct soc_camera_device *icd, unsigned int idx, | |
| struct soc_camera_format_xlate *xlate) | |
| { | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| struct device *dev = icd->parent; | |
| int formats = 0, ret; | |
| enum v4l2_mbus_pixelcode code; | |
| const struct soc_mbus_pixelfmt *fmt; | |
| ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); | |
| if (ret < 0) | |
| /* No more formats */ | |
| return 0; | |
| fmt = soc_mbus_get_fmtdesc(code); | |
| if (!fmt) { | |
| dev_warn(icd->parent, | |
| "Unsupported format code #%u: 0x%x\n", idx, code); | |
| return 0; | |
| } | |
| /* This also checks support for the requested bits-per-sample */ | |
| ret = mx3_camera_try_bus_param(icd, fmt->bits_per_sample); | |
| if (ret < 0) | |
| return 0; | |
| switch (code) { | |
| case V4L2_MBUS_FMT_SBGGR10_1X10: | |
| formats++; | |
| if (xlate) { | |
| xlate->host_fmt = &mx3_camera_formats[0]; | |
| xlate->code = code; | |
| xlate++; | |
| dev_dbg(dev, "Providing format %s using code 0x%x\n", | |
| mx3_camera_formats[0].name, code); | |
| } | |
| break; | |
| case V4L2_MBUS_FMT_Y10_1X10: | |
| formats++; | |
| if (xlate) { | |
| xlate->host_fmt = &mx3_camera_formats[1]; | |
| xlate->code = code; | |
| xlate++; | |
| dev_dbg(dev, "Providing format %s using code 0x%x\n", | |
| mx3_camera_formats[1].name, code); | |
| } | |
| break; | |
| default: | |
| if (!mx3_camera_packing_supported(fmt)) | |
| return 0; | |
| } | |
| /* Generic pass-through */ | |
| formats++; | |
| if (xlate) { | |
| xlate->host_fmt = fmt; | |
| xlate->code = code; | |
| dev_dbg(dev, "Providing format %c%c%c%c in pass-through mode\n", | |
| (fmt->fourcc >> (0*8)) & 0xFF, | |
| (fmt->fourcc >> (1*8)) & 0xFF, | |
| (fmt->fourcc >> (2*8)) & 0xFF, | |
| (fmt->fourcc >> (3*8)) & 0xFF); | |
| xlate++; | |
| } | |
| return formats; | |
| } | |
| static void configure_geometry(struct mx3_camera_dev *mx3_cam, | |
| unsigned int width, unsigned int height, | |
| const struct soc_mbus_pixelfmt *fmt) | |
| { | |
| u32 ctrl, width_field, height_field; | |
| if (fourcc_to_ipu_pix(fmt->fourcc) == IPU_PIX_FMT_GENERIC) { | |
| /* | |
| * As the CSI will be configured to output BAYER, here | |
| * the width parameter count the number of samples to | |
| * capture to complete the whole image width. | |
| */ | |
| unsigned int num, den; | |
| int ret = soc_mbus_samples_per_pixel(fmt, &num, &den); | |
| BUG_ON(ret < 0); | |
| width = width * num / den; | |
| } | |
| /* Setup frame size - this cannot be changed on-the-fly... */ | |
| width_field = width - 1; | |
| height_field = height - 1; | |
| csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_SENS_FRM_SIZE); | |
| csi_reg_write(mx3_cam, width_field << 16, CSI_FLASH_STROBE_1); | |
| csi_reg_write(mx3_cam, (height_field << 16) | 0x22, CSI_FLASH_STROBE_2); | |
| csi_reg_write(mx3_cam, width_field | (height_field << 16), CSI_ACT_FRM_SIZE); | |
| /* ...and position */ | |
| ctrl = csi_reg_read(mx3_cam, CSI_OUT_FRM_CTRL) & 0xffff0000; | |
| /* Sensor does the cropping */ | |
| csi_reg_write(mx3_cam, ctrl | 0 | (0 << 8), CSI_OUT_FRM_CTRL); | |
| } | |
| static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam) | |
| { | |
| dma_cap_mask_t mask; | |
| struct dma_chan *chan; | |
| struct idmac_channel **ichan = &mx3_cam->idmac_channel[0]; | |
| /* We have to use IDMAC_IC_7 for Bayer / generic data */ | |
| struct dma_chan_request rq = {.mx3_cam = mx3_cam, | |
| .id = IDMAC_IC_7}; | |
| dma_cap_zero(mask); | |
| dma_cap_set(DMA_SLAVE, mask); | |
| dma_cap_set(DMA_PRIVATE, mask); | |
| chan = dma_request_channel(mask, chan_filter, &rq); | |
| if (!chan) | |
| return -EBUSY; | |
| *ichan = to_idmac_chan(chan); | |
| (*ichan)->client = mx3_cam; | |
| return 0; | |
| } | |
| /* | |
| * FIXME: learn to use stride != width, then we can keep stride properly aligned | |
| * and support arbitrary (even) widths. | |
| */ | |
| static inline void stride_align(__u32 *width) | |
| { | |
| if (ALIGN(*width, 8) < 4096) | |
| *width = ALIGN(*width, 8); | |
| else | |
| *width = *width & ~7; | |
| } | |
| /* | |
| * As long as we don't implement host-side cropping and scaling, we can use | |
| * default g_crop and cropcap from soc_camera.c | |
| */ | |
| static int mx3_camera_set_crop(struct soc_camera_device *icd, | |
| const struct v4l2_crop *a) | |
| { | |
| struct v4l2_crop a_writable = *a; | |
| struct v4l2_rect *rect = &a_writable.c; | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| struct v4l2_mbus_framefmt mf; | |
| int ret; | |
| soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096); | |
| soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096); | |
| ret = v4l2_subdev_call(sd, video, s_crop, a); | |
| if (ret < 0) | |
| return ret; | |
| /* The capture device might have changed its output sizes */ | |
| ret = v4l2_subdev_call(sd, video, g_mbus_fmt, &mf); | |
| if (ret < 0) | |
| return ret; | |
| if (mf.code != icd->current_fmt->code) | |
| return -EINVAL; | |
| if (mf.width & 7) { | |
| /* Ouch! We can only handle 8-byte aligned width... */ | |
| stride_align(&mf.width); | |
| ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| if (mf.width != icd->user_width || mf.height != icd->user_height) | |
| configure_geometry(mx3_cam, mf.width, mf.height, | |
| icd->current_fmt->host_fmt); | |
| dev_dbg(icd->parent, "Sensor cropped %dx%d\n", | |
| mf.width, mf.height); | |
| icd->user_width = mf.width; | |
| icd->user_height = mf.height; | |
| return ret; | |
| } | |
| static int mx3_camera_set_fmt(struct soc_camera_device *icd, | |
| struct v4l2_format *f) | |
| { | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| const struct soc_camera_format_xlate *xlate; | |
| struct v4l2_pix_format *pix = &f->fmt.pix; | |
| struct v4l2_mbus_framefmt mf; | |
| int ret; | |
| xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); | |
| if (!xlate) { | |
| dev_warn(icd->parent, "Format %x not found\n", | |
| pix->pixelformat); | |
| return -EINVAL; | |
| } | |
| stride_align(&pix->width); | |
| dev_dbg(icd->parent, "Set format %dx%d\n", pix->width, pix->height); | |
| /* | |
| * Might have to perform a complete interface initialisation like in | |
| * ipu_csi_init_interface() in mxc_v4l2_s_param(). Also consider | |
| * mxc_v4l2_s_fmt() | |
| */ | |
| configure_geometry(mx3_cam, pix->width, pix->height, xlate->host_fmt); | |
| mf.width = pix->width; | |
| mf.height = pix->height; | |
| mf.field = pix->field; | |
| mf.colorspace = pix->colorspace; | |
| mf.code = xlate->code; | |
| ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); | |
| if (ret < 0) | |
| return ret; | |
| if (mf.code != xlate->code) | |
| return -EINVAL; | |
| if (!mx3_cam->idmac_channel[0]) { | |
| ret = acquire_dma_channel(mx3_cam); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| pix->width = mf.width; | |
| pix->height = mf.height; | |
| pix->field = mf.field; | |
| mx3_cam->field = mf.field; | |
| pix->colorspace = mf.colorspace; | |
| icd->current_fmt = xlate; | |
| dev_dbg(icd->parent, "Sensor set %dx%d\n", pix->width, pix->height); | |
| return ret; | |
| } | |
| static int mx3_camera_try_fmt(struct soc_camera_device *icd, | |
| struct v4l2_format *f) | |
| { | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| const struct soc_camera_format_xlate *xlate; | |
| struct v4l2_pix_format *pix = &f->fmt.pix; | |
| struct v4l2_mbus_framefmt mf; | |
| __u32 pixfmt = pix->pixelformat; | |
| int ret; | |
| xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); | |
| if (pixfmt && !xlate) { | |
| dev_warn(icd->parent, "Format %x not found\n", pixfmt); | |
| return -EINVAL; | |
| } | |
| /* limit to MX3 hardware capabilities */ | |
| if (pix->height > 4096) | |
| pix->height = 4096; | |
| if (pix->width > 4096) | |
| pix->width = 4096; | |
| /* limit to sensor capabilities */ | |
| mf.width = pix->width; | |
| mf.height = pix->height; | |
| mf.field = pix->field; | |
| mf.colorspace = pix->colorspace; | |
| mf.code = xlate->code; | |
| ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); | |
| if (ret < 0) | |
| return ret; | |
| pix->width = mf.width; | |
| pix->height = mf.height; | |
| pix->colorspace = mf.colorspace; | |
| switch (mf.field) { | |
| case V4L2_FIELD_ANY: | |
| pix->field = V4L2_FIELD_NONE; | |
| break; | |
| case V4L2_FIELD_NONE: | |
| break; | |
| default: | |
| dev_err(icd->parent, "Field type %d unsupported.\n", | |
| mf.field); | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } | |
| static int mx3_camera_reqbufs(struct soc_camera_device *icd, | |
| struct v4l2_requestbuffers *p) | |
| { | |
| return 0; | |
| } | |
| static unsigned int mx3_camera_poll(struct file *file, poll_table *pt) | |
| { | |
| struct soc_camera_device *icd = file->private_data; | |
| return vb2_poll(&icd->vb2_vidq, file, pt); | |
| } | |
| static int mx3_camera_querycap(struct soc_camera_host *ici, | |
| struct v4l2_capability *cap) | |
| { | |
| /* cap->name is set by the firendly caller:-> */ | |
| strlcpy(cap->card, "i.MX3x Camera", sizeof(cap->card)); | |
| cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; | |
| return 0; | |
| } | |
| static int mx3_camera_set_bus_param(struct soc_camera_device *icd) | |
| { | |
| struct v4l2_subdev *sd = soc_camera_to_subdev(icd); | |
| struct soc_camera_host *ici = to_soc_camera_host(icd->parent); | |
| struct mx3_camera_dev *mx3_cam = ici->priv; | |
| struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,}; | |
| u32 pixfmt = icd->current_fmt->host_fmt->fourcc; | |
| unsigned long bus_flags, common_flags; | |
| u32 dw, sens_conf; | |
| const struct soc_mbus_pixelfmt *fmt; | |
| int buswidth; | |
| int ret; | |
| const struct soc_camera_format_xlate *xlate; | |
| struct device *dev = icd->parent; | |
| fmt = soc_mbus_get_fmtdesc(icd->current_fmt->code); | |
| if (!fmt) | |
| return -EINVAL; | |
| xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); | |
| if (!xlate) { | |
| dev_warn(dev, "Format %x not found\n", pixfmt); | |
| return -EINVAL; | |
| } | |
| buswidth = fmt->bits_per_sample; | |
| ret = test_platform_param(mx3_cam, buswidth, &bus_flags); | |
| dev_dbg(dev, "requested bus width %d bit: %d\n", buswidth, ret); | |
| if (ret < 0) | |
| return ret; | |
| ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg); | |
| if (!ret) { | |
| common_flags = soc_mbus_config_compatible(&cfg, | |
| bus_flags); | |
| if (!common_flags) { | |
| dev_warn(icd->parent, | |
| "Flags incompatible: camera 0x%x, host 0x%lx\n", | |
| cfg.flags, bus_flags); | |
| return -EINVAL; | |
| } | |
| } else if (ret != -ENOIOCTLCMD) { | |
| return ret; | |
| } else { | |
| common_flags = bus_flags; | |
| } | |
| dev_dbg(dev, "Flags cam: 0x%x host: 0x%lx common: 0x%lx\n", | |
| cfg.flags, bus_flags, common_flags); | |
| /* Make choices, based on platform preferences */ | |
| if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && | |
| (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { | |
| if (mx3_cam->platform_flags & MX3_CAMERA_HSP) | |
| common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH; | |
| else | |
| common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW; | |
| } | |
| if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) && | |
| (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) { | |
| if (mx3_cam->platform_flags & MX3_CAMERA_VSP) | |
| common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH; | |
| else | |
| common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW; | |
| } | |
| if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) && | |
| (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) { | |
| if (mx3_cam->platform_flags & MX3_CAMERA_DP) | |
| common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH; | |
| else | |
| common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW; | |
| } | |
| if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) && | |
| (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) { | |
| if (mx3_cam->platform_flags & MX3_CAMERA_PCP) | |
| common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING; | |
| else | |
| common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING; | |
| } | |
| cfg.flags = common_flags; | |
| ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg); | |
| if (ret < 0 && ret != -ENOIOCTLCMD) { | |
| dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n", | |
| common_flags, ret); | |
| return ret; | |
| } | |
| /* | |
| * So far only gated clock mode is supported. Add a line | |
| * (3 << CSI_SENS_CONF_SENS_PRTCL_SHIFT) | | |
| * below and select the required mode when supporting other | |
| * synchronisation protocols. | |
| */ | |
| sens_conf = csi_reg_read(mx3_cam, CSI_SENS_CONF) & | |
| ~((1 << CSI_SENS_CONF_VSYNC_POL_SHIFT) | | |
| (1 << CSI_SENS_CONF_HSYNC_POL_SHIFT) | | |
| (1 << CSI_SENS_CONF_DATA_POL_SHIFT) | | |
| (1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT) | | |
| (3 << CSI_SENS_CONF_DATA_FMT_SHIFT) | | |
| (3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT)); | |
| /* TODO: Support RGB and YUV formats */ | |
| /* This has been set in mx3_camera_activate(), but we clear it above */ | |
| sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER; | |
| if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) | |
| sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT; | |
| if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) | |
| sens_conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT; | |
| if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) | |
| sens_conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT; | |
| if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW) | |
| sens_conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT; | |
| /* Just do what we're asked to do */ | |
| switch (xlate->host_fmt->bits_per_sample) { | |
| case 4: | |
| dw = 0 << CSI_SENS_CONF_DATA_WIDTH_SHIFT; | |
| break; | |
| case 8: | |
| dw = 1 << CSI_SENS_CONF_DATA_WIDTH_SHIFT; | |
| break; | |
| case 10: | |
| dw = 2 << CSI_SENS_CONF_DATA_WIDTH_SHIFT; | |
| break; | |
| default: | |
| /* | |
| * Actually it can only be 15 now, default is just to silence | |
| * compiler warnings | |
| */ | |
| case 15: | |
| dw = 3 << CSI_SENS_CONF_DATA_WIDTH_SHIFT; | |
| } | |
| csi_reg_write(mx3_cam, sens_conf | dw, CSI_SENS_CONF); | |
| dev_dbg(dev, "Set SENS_CONF to %x\n", sens_conf | dw); | |
| return 0; | |
| } | |
| static struct soc_camera_host_ops mx3_soc_camera_host_ops = { | |
| .owner = THIS_MODULE, | |
| .add = mx3_camera_add_device, | |
| .remove = mx3_camera_remove_device, | |
| .clock_start = mx3_camera_clock_start, | |
| .clock_stop = mx3_camera_clock_stop, | |
| .set_crop = mx3_camera_set_crop, | |
| .set_fmt = mx3_camera_set_fmt, | |
| .try_fmt = mx3_camera_try_fmt, | |
| .get_formats = mx3_camera_get_formats, | |
| .init_videobuf2 = mx3_camera_init_videobuf, | |
| .reqbufs = mx3_camera_reqbufs, | |
| .poll = mx3_camera_poll, | |
| .querycap = mx3_camera_querycap, | |
| .set_bus_param = mx3_camera_set_bus_param, | |
| }; | |
| static int mx3_camera_probe(struct platform_device *pdev) | |
| { | |
| struct mx3_camera_pdata *pdata = pdev->dev.platform_data; | |
| struct mx3_camera_dev *mx3_cam; | |
| struct resource *res; | |
| void __iomem *base; | |
| int err = 0; | |
| struct soc_camera_host *soc_host; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| if (!pdata) | |
| return -EINVAL; | |
| mx3_cam = devm_kzalloc(&pdev->dev, sizeof(*mx3_cam), GFP_KERNEL); | |
| if (!mx3_cam) { | |
| dev_err(&pdev->dev, "Could not allocate mx3 camera object\n"); | |
| return -ENOMEM; | |
| } | |
| mx3_cam->clk = devm_clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(mx3_cam->clk)) | |
| return PTR_ERR(mx3_cam->clk); | |
| mx3_cam->pdata = pdata; | |
| mx3_cam->platform_flags = pdata->flags; | |
| if (!(mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_MASK)) { | |
| /* | |
| * Platform hasn't set available data widths. This is bad. | |
| * Warn and use a default. | |
| */ | |
| dev_warn(&pdev->dev, "WARNING! Platform hasn't set available " | |
| "data widths, using default 8 bit\n"); | |
| mx3_cam->platform_flags |= MX3_CAMERA_DATAWIDTH_8; | |
| } | |
| if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4) | |
| mx3_cam->width_flags = 1 << 3; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8) | |
| mx3_cam->width_flags |= 1 << 7; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10) | |
| mx3_cam->width_flags |= 1 << 9; | |
| if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15) | |
| mx3_cam->width_flags |= 1 << 14; | |
| mx3_cam->mclk = pdata->mclk_10khz * 10000; | |
| if (!mx3_cam->mclk) { | |
| dev_warn(&pdev->dev, | |
| "mclk_10khz == 0! Please, fix your platform data. " | |
| "Using default 20MHz\n"); | |
| mx3_cam->mclk = 20000000; | |
| } | |
| /* list of video-buffers */ | |
| INIT_LIST_HEAD(&mx3_cam->capture); | |
| spin_lock_init(&mx3_cam->lock); | |
| mx3_cam->base = base; | |
| soc_host = &mx3_cam->soc_host; | |
| soc_host->drv_name = MX3_CAM_DRV_NAME; | |
| soc_host->ops = &mx3_soc_camera_host_ops; | |
| soc_host->priv = mx3_cam; | |
| soc_host->v4l2_dev.dev = &pdev->dev; | |
| soc_host->nr = pdev->id; | |
| mx3_cam->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); | |
| if (IS_ERR(mx3_cam->alloc_ctx)) | |
| return PTR_ERR(mx3_cam->alloc_ctx); | |
| if (pdata->asd_sizes) { | |
| soc_host->asd = pdata->asd; | |
| soc_host->asd_sizes = pdata->asd_sizes; | |
| } | |
| err = soc_camera_host_register(soc_host); | |
| if (err) | |
| goto ecamhostreg; | |
| /* IDMAC interface */ | |
| dmaengine_get(); | |
| return 0; | |
| ecamhostreg: | |
| vb2_dma_contig_cleanup_ctx(mx3_cam->alloc_ctx); | |
| return err; | |
| } | |
| static int mx3_camera_remove(struct platform_device *pdev) | |
| { | |
| struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); | |
| struct mx3_camera_dev *mx3_cam = container_of(soc_host, | |
| struct mx3_camera_dev, soc_host); | |
| soc_camera_host_unregister(soc_host); | |
| /* | |
| * The channel has either not been allocated, | |
| * or should have been released | |
| */ | |
| if (WARN_ON(mx3_cam->idmac_channel[0])) | |
| dma_release_channel(&mx3_cam->idmac_channel[0]->dma_chan); | |
| vb2_dma_contig_cleanup_ctx(mx3_cam->alloc_ctx); | |
| dmaengine_put(); | |
| return 0; | |
| } | |
| static struct platform_driver mx3_camera_driver = { | |
| .driver = { | |
| .name = MX3_CAM_DRV_NAME, | |
| .owner = THIS_MODULE, | |
| }, | |
| .probe = mx3_camera_probe, | |
| .remove = mx3_camera_remove, | |
| }; | |
| module_platform_driver(mx3_camera_driver); | |
| MODULE_DESCRIPTION("i.MX3x SoC Camera Host driver"); | |
| MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_VERSION("0.2.3"); | |
| MODULE_ALIAS("platform:" MX3_CAM_DRV_NAME); |