| /* | |
| * | |
| * Intel Management Engine Interface (Intel MEI) Linux driver | |
| * Copyright (c) 2003-2012, Intel Corporation. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| * more details. | |
| * | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/device.h> | |
| #include <linux/pci.h> | |
| #include <linux/sched.h> | |
| #include <linux/watchdog.h> | |
| #include <linux/mei.h> | |
| #include "mei_dev.h" | |
| #include "hbm.h" | |
| #include "hw-me.h" | |
| #include "client.h" | |
| static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 }; | |
| static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 }; | |
| /* | |
| * AMT Watchdog Device | |
| */ | |
| #define INTEL_AMT_WATCHDOG_ID "INTCAMT" | |
| /* UUIDs for AMT F/W clients */ | |
| const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89, | |
| 0x9D, 0xA9, 0x15, 0x14, 0xCB, | |
| 0x32, 0xAB); | |
| static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout) | |
| { | |
| dev_dbg(&dev->pdev->dev, "wd: set timeout=%d.\n", timeout); | |
| memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE); | |
| memcpy(dev->wd_data + MEI_WD_HDR_SIZE, &timeout, sizeof(u16)); | |
| } | |
| /** | |
| * mei_wd_host_init - connect to the watchdog client | |
| * | |
| * @dev: the device structure | |
| * | |
| * returns -ENENT if wd client cannot be found | |
| * -EIO if write has failed | |
| * 0 on success | |
| */ | |
| int mei_wd_host_init(struct mei_device *dev) | |
| { | |
| struct mei_cl *cl = &dev->wd_cl; | |
| int i; | |
| int ret; | |
| mei_cl_init(cl, dev); | |
| dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT; | |
| dev->wd_state = MEI_WD_IDLE; | |
| /* check for valid client id */ | |
| i = mei_me_cl_by_uuid(dev, &mei_wd_guid); | |
| if (i < 0) { | |
| dev_info(&dev->pdev->dev, "wd: failed to find the client\n"); | |
| return -ENOENT; | |
| } | |
| cl->me_client_id = dev->me_clients[i].client_id; | |
| ret = mei_cl_link(cl, MEI_WD_HOST_CLIENT_ID); | |
| if (ret < 0) { | |
| dev_info(&dev->pdev->dev, "wd: failed link client\n"); | |
| return -ENOENT; | |
| } | |
| cl->state = MEI_FILE_CONNECTING; | |
| if (mei_hbm_cl_connect_req(dev, cl)) { | |
| dev_err(&dev->pdev->dev, "wd: failed to connect to the client\n"); | |
| cl->state = MEI_FILE_DISCONNECTED; | |
| cl->host_client_id = 0; | |
| return -EIO; | |
| } | |
| cl->timer_count = MEI_CONNECT_TIMEOUT; | |
| return 0; | |
| } | |
| /** | |
| * mei_wd_send - sends watch dog message to fw. | |
| * | |
| * @dev: the device structure | |
| * | |
| * returns 0 if success, | |
| * -EIO when message send fails | |
| * -EINVAL when invalid message is to be sent | |
| */ | |
| int mei_wd_send(struct mei_device *dev) | |
| { | |
| struct mei_msg_hdr hdr; | |
| hdr.host_addr = dev->wd_cl.host_client_id; | |
| hdr.me_addr = dev->wd_cl.me_client_id; | |
| hdr.msg_complete = 1; | |
| hdr.reserved = 0; | |
| if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE)) | |
| hdr.length = MEI_WD_START_MSG_SIZE; | |
| else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE)) | |
| hdr.length = MEI_WD_STOP_MSG_SIZE; | |
| else | |
| return -EINVAL; | |
| return mei_write_message(dev, &hdr, dev->wd_data); | |
| } | |
| /** | |
| * mei_wd_stop - sends watchdog stop message to fw. | |
| * | |
| * @dev: the device structure | |
| * @preserve: indicate if to keep the timeout value | |
| * | |
| * returns 0 if success, | |
| * -EIO when message send fails | |
| * -EINVAL when invalid message is to be sent | |
| */ | |
| int mei_wd_stop(struct mei_device *dev) | |
| { | |
| int ret; | |
| if (dev->wd_cl.state != MEI_FILE_CONNECTED || | |
| dev->wd_state != MEI_WD_RUNNING) | |
| return 0; | |
| memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_STOP_MSG_SIZE); | |
| dev->wd_state = MEI_WD_STOPPING; | |
| ret = mei_cl_flow_ctrl_creds(&dev->wd_cl); | |
| if (ret < 0) | |
| goto out; | |
| if (ret && dev->hbuf_is_ready) { | |
| ret = 0; | |
| dev->hbuf_is_ready = false; | |
| if (!mei_wd_send(dev)) { | |
| ret = mei_cl_flow_ctrl_reduce(&dev->wd_cl); | |
| if (ret) | |
| goto out; | |
| } else { | |
| dev_err(&dev->pdev->dev, "wd: send stop failed\n"); | |
| } | |
| dev->wd_pending = false; | |
| } else { | |
| dev->wd_pending = true; | |
| } | |
| mutex_unlock(&dev->device_lock); | |
| ret = wait_event_interruptible_timeout(dev->wait_stop_wd, | |
| dev->wd_state == MEI_WD_IDLE, | |
| msecs_to_jiffies(MEI_WD_STOP_TIMEOUT)); | |
| mutex_lock(&dev->device_lock); | |
| if (dev->wd_state == MEI_WD_IDLE) { | |
| dev_dbg(&dev->pdev->dev, "wd: stop completed ret=%d.\n", ret); | |
| ret = 0; | |
| } else { | |
| if (!ret) | |
| ret = -ETIMEDOUT; | |
| dev_warn(&dev->pdev->dev, | |
| "wd: stop failed to complete ret=%d.\n", ret); | |
| } | |
| out: | |
| return ret; | |
| } | |
| /* | |
| * mei_wd_ops_start - wd start command from the watchdog core. | |
| * | |
| * @wd_dev - watchdog device struct | |
| * | |
| * returns 0 if success, negative errno code for failure | |
| */ | |
| static int mei_wd_ops_start(struct watchdog_device *wd_dev) | |
| { | |
| int err = -ENODEV; | |
| struct mei_device *dev; | |
| dev = watchdog_get_drvdata(wd_dev); | |
| if (!dev) | |
| return -ENODEV; | |
| mutex_lock(&dev->device_lock); | |
| if (dev->dev_state != MEI_DEV_ENABLED) { | |
| dev_dbg(&dev->pdev->dev, | |
| "wd: dev_state != MEI_DEV_ENABLED dev_state = %s\n", | |
| mei_dev_state_str(dev->dev_state)); | |
| goto end_unlock; | |
| } | |
| if (dev->wd_cl.state != MEI_FILE_CONNECTED) { | |
| dev_dbg(&dev->pdev->dev, | |
| "MEI Driver is not connected to Watchdog Client\n"); | |
| goto end_unlock; | |
| } | |
| mei_wd_set_start_timeout(dev, dev->wd_timeout); | |
| err = 0; | |
| end_unlock: | |
| mutex_unlock(&dev->device_lock); | |
| return err; | |
| } | |
| /* | |
| * mei_wd_ops_stop - wd stop command from the watchdog core. | |
| * | |
| * @wd_dev - watchdog device struct | |
| * | |
| * returns 0 if success, negative errno code for failure | |
| */ | |
| static int mei_wd_ops_stop(struct watchdog_device *wd_dev) | |
| { | |
| struct mei_device *dev; | |
| dev = watchdog_get_drvdata(wd_dev); | |
| if (!dev) | |
| return -ENODEV; | |
| mutex_lock(&dev->device_lock); | |
| mei_wd_stop(dev); | |
| mutex_unlock(&dev->device_lock); | |
| return 0; | |
| } | |
| /* | |
| * mei_wd_ops_ping - wd ping command from the watchdog core. | |
| * | |
| * @wd_dev - watchdog device struct | |
| * | |
| * returns 0 if success, negative errno code for failure | |
| */ | |
| static int mei_wd_ops_ping(struct watchdog_device *wd_dev) | |
| { | |
| int ret = 0; | |
| struct mei_device *dev; | |
| dev = watchdog_get_drvdata(wd_dev); | |
| if (!dev) | |
| return -ENODEV; | |
| mutex_lock(&dev->device_lock); | |
| if (dev->wd_cl.state != MEI_FILE_CONNECTED) { | |
| dev_err(&dev->pdev->dev, "wd: not connected.\n"); | |
| ret = -ENODEV; | |
| goto end; | |
| } | |
| dev->wd_state = MEI_WD_RUNNING; | |
| /* Check if we can send the ping to HW*/ | |
| if (dev->hbuf_is_ready && mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) { | |
| dev->hbuf_is_ready = false; | |
| dev_dbg(&dev->pdev->dev, "wd: sending ping\n"); | |
| if (mei_wd_send(dev)) { | |
| dev_err(&dev->pdev->dev, "wd: send failed.\n"); | |
| ret = -EIO; | |
| goto end; | |
| } | |
| if (mei_cl_flow_ctrl_reduce(&dev->wd_cl)) { | |
| dev_err(&dev->pdev->dev, | |
| "wd: mei_cl_flow_ctrl_reduce() failed.\n"); | |
| ret = -EIO; | |
| goto end; | |
| } | |
| } else { | |
| dev->wd_pending = true; | |
| } | |
| end: | |
| mutex_unlock(&dev->device_lock); | |
| return ret; | |
| } | |
| /* | |
| * mei_wd_ops_set_timeout - wd set timeout command from the watchdog core. | |
| * | |
| * @wd_dev - watchdog device struct | |
| * @timeout - timeout value to set | |
| * | |
| * returns 0 if success, negative errno code for failure | |
| */ | |
| static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev, | |
| unsigned int timeout) | |
| { | |
| struct mei_device *dev; | |
| dev = watchdog_get_drvdata(wd_dev); | |
| if (!dev) | |
| return -ENODEV; | |
| /* Check Timeout value */ | |
| if (timeout < MEI_WD_MIN_TIMEOUT || timeout > MEI_WD_MAX_TIMEOUT) | |
| return -EINVAL; | |
| mutex_lock(&dev->device_lock); | |
| dev->wd_timeout = timeout; | |
| wd_dev->timeout = timeout; | |
| mei_wd_set_start_timeout(dev, dev->wd_timeout); | |
| mutex_unlock(&dev->device_lock); | |
| return 0; | |
| } | |
| /* | |
| * Watchdog Device structs | |
| */ | |
| static const struct watchdog_ops wd_ops = { | |
| .owner = THIS_MODULE, | |
| .start = mei_wd_ops_start, | |
| .stop = mei_wd_ops_stop, | |
| .ping = mei_wd_ops_ping, | |
| .set_timeout = mei_wd_ops_set_timeout, | |
| }; | |
| static const struct watchdog_info wd_info = { | |
| .identity = INTEL_AMT_WATCHDOG_ID, | |
| .options = WDIOF_KEEPALIVEPING | | |
| WDIOF_SETTIMEOUT | | |
| WDIOF_ALARMONLY, | |
| }; | |
| static struct watchdog_device amt_wd_dev = { | |
| .info = &wd_info, | |
| .ops = &wd_ops, | |
| .timeout = MEI_WD_DEFAULT_TIMEOUT, | |
| .min_timeout = MEI_WD_MIN_TIMEOUT, | |
| .max_timeout = MEI_WD_MAX_TIMEOUT, | |
| }; | |
| void mei_watchdog_register(struct mei_device *dev) | |
| { | |
| if (watchdog_register_device(&amt_wd_dev)) { | |
| dev_err(&dev->pdev->dev, | |
| "wd: unable to register watchdog device.\n"); | |
| return; | |
| } | |
| dev_dbg(&dev->pdev->dev, | |
| "wd: successfully register watchdog interface.\n"); | |
| watchdog_set_drvdata(&amt_wd_dev, dev); | |
| } | |
| void mei_watchdog_unregister(struct mei_device *dev) | |
| { | |
| if (watchdog_get_drvdata(&amt_wd_dev) == NULL) | |
| return; | |
| watchdog_set_drvdata(&amt_wd_dev, NULL); | |
| watchdog_unregister_device(&amt_wd_dev); | |
| } | |