| /* | |
| * Common Flash Interface support: | |
| * Generic utility functions not dependent on command set | |
| * | |
| * Copyright (C) 2002 Red Hat | |
| * Copyright (C) 2003 STMicroelectronics Limited | |
| * | |
| * This code is covered by the GPL. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/kernel.h> | |
| #include <asm/io.h> | |
| #include <asm/byteorder.h> | |
| #include <linux/errno.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mtd/xip.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/map.h> | |
| #include <linux/mtd/cfi.h> | |
| int __xipram cfi_qry_present(struct map_info *map, __u32 base, | |
| struct cfi_private *cfi) | |
| { | |
| int osf = cfi->interleave * cfi->device_type; /* scale factor */ | |
| map_word val[3]; | |
| map_word qry[3]; | |
| qry[0] = cfi_build_cmd('Q', map, cfi); | |
| qry[1] = cfi_build_cmd('R', map, cfi); | |
| qry[2] = cfi_build_cmd('Y', map, cfi); | |
| val[0] = map_read(map, base + osf*0x10); | |
| val[1] = map_read(map, base + osf*0x11); | |
| val[2] = map_read(map, base + osf*0x12); | |
| if (!map_word_equal(map, qry[0], val[0])) | |
| return 0; | |
| if (!map_word_equal(map, qry[1], val[1])) | |
| return 0; | |
| if (!map_word_equal(map, qry[2], val[2])) | |
| return 0; | |
| return 1; /* "QRY" found */ | |
| } | |
| EXPORT_SYMBOL_GPL(cfi_qry_present); | |
| int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map, | |
| struct cfi_private *cfi) | |
| { | |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); | |
| if (cfi_qry_present(map, base, cfi)) | |
| return 1; | |
| /* QRY not found probably we deal with some odd CFI chips */ | |
| /* Some revisions of some old Intel chips? */ | |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); | |
| if (cfi_qry_present(map, base, cfi)) | |
| return 1; | |
| /* ST M29DW chips */ | |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL); | |
| if (cfi_qry_present(map, base, cfi)) | |
| return 1; | |
| /* some old SST chips, e.g. 39VF160x/39VF320x */ | |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL); | |
| if (cfi_qry_present(map, base, cfi)) | |
| return 1; | |
| /* SST 39VF640xB */ | |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0xAA, 0x555, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0x55, 0x2AA, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL); | |
| if (cfi_qry_present(map, base, cfi)) | |
| return 1; | |
| /* QRY not found */ | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(cfi_qry_mode_on); | |
| void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map, | |
| struct cfi_private *cfi) | |
| { | |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); | |
| cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); | |
| /* M29W128G flashes require an additional reset command | |
| when exit qry mode */ | |
| if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E)) | |
| cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); | |
| } | |
| EXPORT_SYMBOL_GPL(cfi_qry_mode_off); | |
| struct cfi_extquery * | |
| __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name) | |
| { | |
| struct cfi_private *cfi = map->fldrv_priv; | |
| __u32 base = 0; // cfi->chips[0].start; | |
| int ofs_factor = cfi->interleave * cfi->device_type; | |
| int i; | |
| struct cfi_extquery *extp = NULL; | |
| if (!adr) | |
| goto out; | |
| printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr); | |
| extp = kmalloc(size, GFP_KERNEL); | |
| if (!extp) { | |
| printk(KERN_ERR "Failed to allocate memory\n"); | |
| goto out; | |
| } | |
| #ifdef CONFIG_MTD_XIP | |
| local_irq_disable(); | |
| #endif | |
| /* Switch it into Query Mode */ | |
| cfi_qry_mode_on(base, map, cfi); | |
| /* Read in the Extended Query Table */ | |
| for (i=0; i<size; i++) { | |
| ((unsigned char *)extp)[i] = | |
| cfi_read_query(map, base+((adr+i)*ofs_factor)); | |
| } | |
| /* Make sure it returns to read mode */ | |
| cfi_qry_mode_off(base, map, cfi); | |
| #ifdef CONFIG_MTD_XIP | |
| (void) map_read(map, base); | |
| xip_iprefetch(); | |
| local_irq_enable(); | |
| #endif | |
| out: return extp; | |
| } | |
| EXPORT_SYMBOL(cfi_read_pri); | |
| void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups) | |
| { | |
| struct map_info *map = mtd->priv; | |
| struct cfi_private *cfi = map->fldrv_priv; | |
| struct cfi_fixup *f; | |
| for (f=fixups; f->fixup; f++) { | |
| if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) && | |
| ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) { | |
| f->fixup(mtd); | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(cfi_fixup); | |
| int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, | |
| loff_t ofs, size_t len, void *thunk) | |
| { | |
| struct map_info *map = mtd->priv; | |
| struct cfi_private *cfi = map->fldrv_priv; | |
| unsigned long adr; | |
| int chipnum, ret = 0; | |
| int i, first; | |
| struct mtd_erase_region_info *regions = mtd->eraseregions; | |
| /* Check that both start and end of the requested erase are | |
| * aligned with the erasesize at the appropriate addresses. | |
| */ | |
| i = 0; | |
| /* Skip all erase regions which are ended before the start of | |
| the requested erase. Actually, to save on the calculations, | |
| we skip to the first erase region which starts after the | |
| start of the requested erase, and then go back one. | |
| */ | |
| while (i < mtd->numeraseregions && ofs >= regions[i].offset) | |
| i++; | |
| i--; | |
| /* OK, now i is pointing at the erase region in which this | |
| erase request starts. Check the start of the requested | |
| erase range is aligned with the erase size which is in | |
| effect here. | |
| */ | |
| if (ofs & (regions[i].erasesize-1)) | |
| return -EINVAL; | |
| /* Remember the erase region we start on */ | |
| first = i; | |
| /* Next, check that the end of the requested erase is aligned | |
| * with the erase region at that address. | |
| */ | |
| while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset) | |
| i++; | |
| /* As before, drop back one to point at the region in which | |
| the address actually falls | |
| */ | |
| i--; | |
| if ((ofs + len) & (regions[i].erasesize-1)) | |
| return -EINVAL; | |
| chipnum = ofs >> cfi->chipshift; | |
| adr = ofs - (chipnum << cfi->chipshift); | |
| i=first; | |
| while(len) { | |
| int size = regions[i].erasesize; | |
| ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk); | |
| if (ret) | |
| return ret; | |
| adr += size; | |
| ofs += size; | |
| len -= size; | |
| if (ofs == regions[i].offset + size * regions[i].numblocks) | |
| i++; | |
| if (adr >> cfi->chipshift) { | |
| adr = 0; | |
| chipnum++; | |
| if (chipnum >= cfi->numchips) | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(cfi_varsize_frob); | |
| MODULE_LICENSE("GPL"); |