| /* | |
| * Copyright (c) 2013 Realtek Semiconductor Corp. All rights reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/signal.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/mii.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/usb.h> | |
| #include <linux/crc32.h> | |
| #include <linux/if_vlan.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/list.h> | |
| #include <linux/ip.h> | |
| #include <linux/ipv6.h> | |
| /* Version Information */ | |
| #define DRIVER_VERSION "v1.01.0 (2013/08/12)" | |
| #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>" | |
| #define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters" | |
| #define MODULENAME "r8152" | |
| #define R8152_PHY_ID 32 | |
| #define PLA_IDR 0xc000 | |
| #define PLA_RCR 0xc010 | |
| #define PLA_RMS 0xc016 | |
| #define PLA_RXFIFO_CTRL0 0xc0a0 | |
| #define PLA_RXFIFO_CTRL1 0xc0a4 | |
| #define PLA_RXFIFO_CTRL2 0xc0a8 | |
| #define PLA_FMC 0xc0b4 | |
| #define PLA_CFG_WOL 0xc0b6 | |
| #define PLA_MAR 0xcd00 | |
| #define PAL_BDC_CR 0xd1a0 | |
| #define PLA_LEDSEL 0xdd90 | |
| #define PLA_LED_FEATURE 0xdd92 | |
| #define PLA_PHYAR 0xde00 | |
| #define PLA_GPHY_INTR_IMR 0xe022 | |
| #define PLA_EEE_CR 0xe040 | |
| #define PLA_EEEP_CR 0xe080 | |
| #define PLA_MAC_PWR_CTRL 0xe0c0 | |
| #define PLA_TCR0 0xe610 | |
| #define PLA_TCR1 0xe612 | |
| #define PLA_TXFIFO_CTRL 0xe618 | |
| #define PLA_RSTTELLY 0xe800 | |
| #define PLA_CR 0xe813 | |
| #define PLA_CRWECR 0xe81c | |
| #define PLA_CONFIG5 0xe822 | |
| #define PLA_PHY_PWR 0xe84c | |
| #define PLA_OOB_CTRL 0xe84f | |
| #define PLA_CPCR 0xe854 | |
| #define PLA_MISC_0 0xe858 | |
| #define PLA_MISC_1 0xe85a | |
| #define PLA_OCP_GPHY_BASE 0xe86c | |
| #define PLA_TELLYCNT 0xe890 | |
| #define PLA_SFF_STS_7 0xe8de | |
| #define PLA_PHYSTATUS 0xe908 | |
| #define PLA_BP_BA 0xfc26 | |
| #define PLA_BP_0 0xfc28 | |
| #define PLA_BP_1 0xfc2a | |
| #define PLA_BP_2 0xfc2c | |
| #define PLA_BP_3 0xfc2e | |
| #define PLA_BP_4 0xfc30 | |
| #define PLA_BP_5 0xfc32 | |
| #define PLA_BP_6 0xfc34 | |
| #define PLA_BP_7 0xfc36 | |
| #define USB_DEV_STAT 0xb808 | |
| #define USB_USB_CTRL 0xd406 | |
| #define USB_PHY_CTRL 0xd408 | |
| #define USB_TX_AGG 0xd40a | |
| #define USB_RX_BUF_TH 0xd40c | |
| #define USB_USB_TIMER 0xd428 | |
| #define USB_PM_CTRL_STATUS 0xd432 | |
| #define USB_TX_DMA 0xd434 | |
| #define USB_UPS_CTRL 0xd800 | |
| #define USB_BP_BA 0xfc26 | |
| #define USB_BP_0 0xfc28 | |
| #define USB_BP_1 0xfc2a | |
| #define USB_BP_2 0xfc2c | |
| #define USB_BP_3 0xfc2e | |
| #define USB_BP_4 0xfc30 | |
| #define USB_BP_5 0xfc32 | |
| #define USB_BP_6 0xfc34 | |
| #define USB_BP_7 0xfc36 | |
| /* OCP Registers */ | |
| #define OCP_ALDPS_CONFIG 0x2010 | |
| #define OCP_EEE_CONFIG1 0x2080 | |
| #define OCP_EEE_CONFIG2 0x2092 | |
| #define OCP_EEE_CONFIG3 0x2094 | |
| #define OCP_EEE_AR 0xa41a | |
| #define OCP_EEE_DATA 0xa41c | |
| /* PLA_RCR */ | |
| #define RCR_AAP 0x00000001 | |
| #define RCR_APM 0x00000002 | |
| #define RCR_AM 0x00000004 | |
| #define RCR_AB 0x00000008 | |
| #define RCR_ACPT_ALL (RCR_AAP | RCR_APM | RCR_AM | RCR_AB) | |
| /* PLA_RXFIFO_CTRL0 */ | |
| #define RXFIFO_THR1_NORMAL 0x00080002 | |
| #define RXFIFO_THR1_OOB 0x01800003 | |
| /* PLA_RXFIFO_CTRL1 */ | |
| #define RXFIFO_THR2_FULL 0x00000060 | |
| #define RXFIFO_THR2_HIGH 0x00000038 | |
| #define RXFIFO_THR2_OOB 0x0000004a | |
| /* PLA_RXFIFO_CTRL2 */ | |
| #define RXFIFO_THR3_FULL 0x00000078 | |
| #define RXFIFO_THR3_HIGH 0x00000048 | |
| #define RXFIFO_THR3_OOB 0x0000005a | |
| /* PLA_TXFIFO_CTRL */ | |
| #define TXFIFO_THR_NORMAL 0x00400008 | |
| /* PLA_FMC */ | |
| #define FMC_FCR_MCU_EN 0x0001 | |
| /* PLA_EEEP_CR */ | |
| #define EEEP_CR_EEEP_TX 0x0002 | |
| /* PLA_TCR0 */ | |
| #define TCR0_TX_EMPTY 0x0800 | |
| #define TCR0_AUTO_FIFO 0x0080 | |
| /* PLA_TCR1 */ | |
| #define VERSION_MASK 0x7cf0 | |
| /* PLA_CR */ | |
| #define CR_RST 0x10 | |
| #define CR_RE 0x08 | |
| #define CR_TE 0x04 | |
| /* PLA_CRWECR */ | |
| #define CRWECR_NORAML 0x00 | |
| #define CRWECR_CONFIG 0xc0 | |
| /* PLA_OOB_CTRL */ | |
| #define NOW_IS_OOB 0x80 | |
| #define TXFIFO_EMPTY 0x20 | |
| #define RXFIFO_EMPTY 0x10 | |
| #define LINK_LIST_READY 0x02 | |
| #define DIS_MCU_CLROOB 0x01 | |
| #define FIFO_EMPTY (TXFIFO_EMPTY | RXFIFO_EMPTY) | |
| /* PLA_MISC_1 */ | |
| #define RXDY_GATED_EN 0x0008 | |
| /* PLA_SFF_STS_7 */ | |
| #define RE_INIT_LL 0x8000 | |
| #define MCU_BORW_EN 0x4000 | |
| /* PLA_CPCR */ | |
| #define CPCR_RX_VLAN 0x0040 | |
| /* PLA_CFG_WOL */ | |
| #define MAGIC_EN 0x0001 | |
| /* PAL_BDC_CR */ | |
| #define ALDPS_PROXY_MODE 0x0001 | |
| /* PLA_CONFIG5 */ | |
| #define LAN_WAKE_EN 0x0002 | |
| /* PLA_LED_FEATURE */ | |
| #define LED_MODE_MASK 0x0700 | |
| /* PLA_PHY_PWR */ | |
| #define TX_10M_IDLE_EN 0x0080 | |
| #define PFM_PWM_SWITCH 0x0040 | |
| /* PLA_MAC_PWR_CTRL */ | |
| #define D3_CLK_GATED_EN 0x00004000 | |
| #define MCU_CLK_RATIO 0x07010f07 | |
| #define MCU_CLK_RATIO_MASK 0x0f0f0f0f | |
| /* PLA_GPHY_INTR_IMR */ | |
| #define GPHY_STS_MSK 0x0001 | |
| #define SPEED_DOWN_MSK 0x0002 | |
| #define SPDWN_RXDV_MSK 0x0004 | |
| #define SPDWN_LINKCHG_MSK 0x0008 | |
| /* PLA_PHYAR */ | |
| #define PHYAR_FLAG 0x80000000 | |
| /* PLA_EEE_CR */ | |
| #define EEE_RX_EN 0x0001 | |
| #define EEE_TX_EN 0x0002 | |
| /* USB_DEV_STAT */ | |
| #define STAT_SPEED_MASK 0x0006 | |
| #define STAT_SPEED_HIGH 0x0000 | |
| #define STAT_SPEED_FULL 0x0001 | |
| /* USB_TX_AGG */ | |
| #define TX_AGG_MAX_THRESHOLD 0x03 | |
| /* USB_RX_BUF_TH */ | |
| #define RX_BUF_THR 0x7a120180 | |
| /* USB_TX_DMA */ | |
| #define TEST_MODE_DISABLE 0x00000001 | |
| #define TX_SIZE_ADJUST1 0x00000100 | |
| /* USB_UPS_CTRL */ | |
| #define POWER_CUT 0x0100 | |
| /* USB_PM_CTRL_STATUS */ | |
| #define RWSUME_INDICATE 0x0001 | |
| /* USB_USB_CTRL */ | |
| #define RX_AGG_DISABLE 0x0010 | |
| /* OCP_ALDPS_CONFIG */ | |
| #define ENPWRSAVE 0x8000 | |
| #define ENPDNPS 0x0200 | |
| #define LINKENA 0x0100 | |
| #define DIS_SDSAVE 0x0010 | |
| /* OCP_EEE_CONFIG1 */ | |
| #define RG_TXLPI_MSK_HFDUP 0x8000 | |
| #define RG_MATCLR_EN 0x4000 | |
| #define EEE_10_CAP 0x2000 | |
| #define EEE_NWAY_EN 0x1000 | |
| #define TX_QUIET_EN 0x0200 | |
| #define RX_QUIET_EN 0x0100 | |
| #define SDRISETIME 0x0010 /* bit 4 ~ 6 */ | |
| #define RG_RXLPI_MSK_HFDUP 0x0008 | |
| #define SDFALLTIME 0x0007 /* bit 0 ~ 2 */ | |
| /* OCP_EEE_CONFIG2 */ | |
| #define RG_LPIHYS_NUM 0x7000 /* bit 12 ~ 15 */ | |
| #define RG_DACQUIET_EN 0x0400 | |
| #define RG_LDVQUIET_EN 0x0200 | |
| #define RG_CKRSEL 0x0020 | |
| #define RG_EEEPRG_EN 0x0010 | |
| /* OCP_EEE_CONFIG3 */ | |
| #define FST_SNR_EYE_R 0x1500 /* bit 7 ~ 15 */ | |
| #define RG_LFS_SEL 0x0060 /* bit 6 ~ 5 */ | |
| #define MSK_PH 0x0006 /* bit 0 ~ 3 */ | |
| /* OCP_EEE_AR */ | |
| /* bit[15:14] function */ | |
| #define FUN_ADDR 0x0000 | |
| #define FUN_DATA 0x4000 | |
| /* bit[4:0] device addr */ | |
| #define DEVICE_ADDR 0x0007 | |
| /* OCP_EEE_DATA */ | |
| #define EEE_ADDR 0x003C | |
| #define EEE_DATA 0x0002 | |
| enum rtl_register_content { | |
| _100bps = 0x08, | |
| _10bps = 0x04, | |
| LINK_STATUS = 0x02, | |
| FULL_DUP = 0x01, | |
| }; | |
| #define RTL8152_MAX_TX 10 | |
| #define RTL8152_MAX_RX 10 | |
| #define INTBUFSIZE 2 | |
| #define INTR_LINK 0x0004 | |
| #define RTL8152_REQT_READ 0xc0 | |
| #define RTL8152_REQT_WRITE 0x40 | |
| #define RTL8152_REQ_GET_REGS 0x05 | |
| #define RTL8152_REQ_SET_REGS 0x05 | |
| #define BYTE_EN_DWORD 0xff | |
| #define BYTE_EN_WORD 0x33 | |
| #define BYTE_EN_BYTE 0x11 | |
| #define BYTE_EN_SIX_BYTES 0x3f | |
| #define BYTE_EN_START_MASK 0x0f | |
| #define BYTE_EN_END_MASK 0xf0 | |
| #define RTL8152_RMS (VLAN_ETH_FRAME_LEN + VLAN_HLEN) | |
| #define RTL8152_TX_TIMEOUT (HZ) | |
| /* rtl8152 flags */ | |
| enum rtl8152_flags { | |
| RTL8152_UNPLUG = 0, | |
| RTL8152_SET_RX_MODE, | |
| WORK_ENABLE, | |
| RTL8152_LINK_CHG, | |
| }; | |
| /* Define these values to match your device */ | |
| #define VENDOR_ID_REALTEK 0x0bda | |
| #define PRODUCT_ID_RTL8152 0x8152 | |
| #define MCU_TYPE_PLA 0x0100 | |
| #define MCU_TYPE_USB 0x0000 | |
| struct rx_desc { | |
| u32 opts1; | |
| #define RX_LEN_MASK 0x7fff | |
| u32 opts2; | |
| u32 opts3; | |
| u32 opts4; | |
| u32 opts5; | |
| u32 opts6; | |
| }; | |
| struct tx_desc { | |
| u32 opts1; | |
| #define TX_FS (1 << 31) /* First segment of a packet */ | |
| #define TX_LS (1 << 30) /* Final segment of a packet */ | |
| #define TX_LEN_MASK 0x3ffff | |
| u32 opts2; | |
| #define UDP_CS (1 << 31) /* Calculate UDP/IP checksum */ | |
| #define TCP_CS (1 << 30) /* Calculate TCP/IP checksum */ | |
| #define IPV4_CS (1 << 29) /* Calculate IPv4 checksum */ | |
| #define IPV6_CS (1 << 28) /* Calculate IPv6 checksum */ | |
| }; | |
| struct r8152; | |
| struct rx_agg { | |
| struct list_head list; | |
| struct urb *urb; | |
| struct r8152 *context; | |
| void *buffer; | |
| void *head; | |
| }; | |
| struct tx_agg { | |
| struct list_head list; | |
| struct urb *urb; | |
| struct r8152 *context; | |
| void *buffer; | |
| void *head; | |
| u32 skb_num; | |
| u32 skb_len; | |
| }; | |
| struct r8152 { | |
| unsigned long flags; | |
| struct usb_device *udev; | |
| struct tasklet_struct tl; | |
| struct usb_interface *intf; | |
| struct net_device *netdev; | |
| struct urb *intr_urb; | |
| struct tx_agg tx_info[RTL8152_MAX_TX]; | |
| struct rx_agg rx_info[RTL8152_MAX_RX]; | |
| struct list_head rx_done, tx_free; | |
| struct sk_buff_head tx_queue; | |
| spinlock_t rx_lock, tx_lock; | |
| struct delayed_work schedule; | |
| struct mii_if_info mii; | |
| int intr_interval; | |
| u32 msg_enable; | |
| u16 ocp_base; | |
| u8 *intr_buff; | |
| u8 version; | |
| u8 speed; | |
| }; | |
| enum rtl_version { | |
| RTL_VER_UNKNOWN = 0, | |
| RTL_VER_01, | |
| RTL_VER_02 | |
| }; | |
| /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). | |
| * The RTL chips use a 64 element hash table based on the Ethernet CRC. | |
| */ | |
| static const int multicast_filter_limit = 32; | |
| static unsigned int rx_buf_sz = 16384; | |
| static | |
| int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) | |
| { | |
| int ret; | |
| void *tmp; | |
| tmp = kmalloc(size, GFP_KERNEL); | |
| if (!tmp) | |
| return -ENOMEM; | |
| ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0), | |
| RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, | |
| value, index, tmp, size, 500); | |
| memcpy(data, tmp, size); | |
| kfree(tmp); | |
| return ret; | |
| } | |
| static | |
| int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) | |
| { | |
| int ret; | |
| void *tmp; | |
| tmp = kmalloc(size, GFP_KERNEL); | |
| if (!tmp) | |
| return -ENOMEM; | |
| memcpy(tmp, data, size); | |
| ret = usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0), | |
| RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, | |
| value, index, tmp, size, 500); | |
| kfree(tmp); | |
| return ret; | |
| } | |
| static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, | |
| void *data, u16 type) | |
| { | |
| u16 limit = 64; | |
| int ret = 0; | |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) | |
| return -ENODEV; | |
| /* both size and indix must be 4 bytes align */ | |
| if ((size & 3) || !size || (index & 3) || !data) | |
| return -EPERM; | |
| if ((u32)index + (u32)size > 0xffff) | |
| return -EPERM; | |
| while (size) { | |
| if (size > limit) { | |
| ret = get_registers(tp, index, type, limit, data); | |
| if (ret < 0) | |
| break; | |
| index += limit; | |
| data += limit; | |
| size -= limit; | |
| } else { | |
| ret = get_registers(tp, index, type, size, data); | |
| if (ret < 0) | |
| break; | |
| index += size; | |
| data += size; | |
| size = 0; | |
| break; | |
| } | |
| } | |
| return ret; | |
| } | |
| static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen, | |
| u16 size, void *data, u16 type) | |
| { | |
| int ret; | |
| u16 byteen_start, byteen_end, byen; | |
| u16 limit = 512; | |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) | |
| return -ENODEV; | |
| /* both size and indix must be 4 bytes align */ | |
| if ((size & 3) || !size || (index & 3) || !data) | |
| return -EPERM; | |
| if ((u32)index + (u32)size > 0xffff) | |
| return -EPERM; | |
| byteen_start = byteen & BYTE_EN_START_MASK; | |
| byteen_end = byteen & BYTE_EN_END_MASK; | |
| byen = byteen_start | (byteen_start << 4); | |
| ret = set_registers(tp, index, type | byen, 4, data); | |
| if (ret < 0) | |
| goto error1; | |
| index += 4; | |
| data += 4; | |
| size -= 4; | |
| if (size) { | |
| size -= 4; | |
| while (size) { | |
| if (size > limit) { | |
| ret = set_registers(tp, index, | |
| type | BYTE_EN_DWORD, | |
| limit, data); | |
| if (ret < 0) | |
| goto error1; | |
| index += limit; | |
| data += limit; | |
| size -= limit; | |
| } else { | |
| ret = set_registers(tp, index, | |
| type | BYTE_EN_DWORD, | |
| size, data); | |
| if (ret < 0) | |
| goto error1; | |
| index += size; | |
| data += size; | |
| size = 0; | |
| break; | |
| } | |
| } | |
| byen = byteen_end | (byteen_end >> 4); | |
| ret = set_registers(tp, index, type | byen, 4, data); | |
| if (ret < 0) | |
| goto error1; | |
| } | |
| error1: | |
| return ret; | |
| } | |
| static inline | |
| int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data) | |
| { | |
| return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA); | |
| } | |
| static inline | |
| int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) | |
| { | |
| return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA); | |
| } | |
| static inline | |
| int usb_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data) | |
| { | |
| return generic_ocp_read(tp, index, size, data, MCU_TYPE_USB); | |
| } | |
| static inline | |
| int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) | |
| { | |
| return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB); | |
| } | |
| static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index) | |
| { | |
| __le32 data; | |
| generic_ocp_read(tp, index, sizeof(data), &data, type); | |
| return __le32_to_cpu(data); | |
| } | |
| static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data) | |
| { | |
| __le32 tmp = __cpu_to_le32(data); | |
| generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type); | |
| } | |
| static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index) | |
| { | |
| u32 data; | |
| __le32 tmp; | |
| u8 shift = index & 2; | |
| index &= ~3; | |
| generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); | |
| data = __le32_to_cpu(tmp); | |
| data >>= (shift * 8); | |
| data &= 0xffff; | |
| return (u16)data; | |
| } | |
| static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data) | |
| { | |
| u32 mask = 0xffff; | |
| __le32 tmp; | |
| u16 byen = BYTE_EN_WORD; | |
| u8 shift = index & 2; | |
| data &= mask; | |
| if (index & 2) { | |
| byen <<= shift; | |
| mask <<= (shift * 8); | |
| data <<= (shift * 8); | |
| index &= ~3; | |
| } | |
| generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); | |
| data |= __le32_to_cpu(tmp) & ~mask; | |
| tmp = __cpu_to_le32(data); | |
| generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type); | |
| } | |
| static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index) | |
| { | |
| u32 data; | |
| __le32 tmp; | |
| u8 shift = index & 3; | |
| index &= ~3; | |
| generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); | |
| data = __le32_to_cpu(tmp); | |
| data >>= (shift * 8); | |
| data &= 0xff; | |
| return (u8)data; | |
| } | |
| static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data) | |
| { | |
| u32 mask = 0xff; | |
| __le32 tmp; | |
| u16 byen = BYTE_EN_BYTE; | |
| u8 shift = index & 3; | |
| data &= mask; | |
| if (index & 3) { | |
| byen <<= shift; | |
| mask <<= (shift * 8); | |
| data <<= (shift * 8); | |
| index &= ~3; | |
| } | |
| generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); | |
| data |= __le32_to_cpu(tmp) & ~mask; | |
| tmp = __cpu_to_le32(data); | |
| generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type); | |
| } | |
| static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value) | |
| { | |
| u32 ocp_data; | |
| int i; | |
| ocp_data = PHYAR_FLAG | ((reg_addr & 0x1f) << 16) | | |
| (value & 0xffff); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data); | |
| for (i = 20; i > 0; i--) { | |
| udelay(25); | |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR); | |
| if (!(ocp_data & PHYAR_FLAG)) | |
| break; | |
| } | |
| udelay(20); | |
| } | |
| static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr) | |
| { | |
| u32 ocp_data; | |
| int i; | |
| ocp_data = (reg_addr & 0x1f) << 16; | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data); | |
| for (i = 20; i > 0; i--) { | |
| udelay(25); | |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR); | |
| if (ocp_data & PHYAR_FLAG) | |
| break; | |
| } | |
| udelay(20); | |
| if (!(ocp_data & PHYAR_FLAG)) | |
| return -EAGAIN; | |
| return (u16)(ocp_data & 0xffff); | |
| } | |
| static int read_mii_word(struct net_device *netdev, int phy_id, int reg) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| if (phy_id != R8152_PHY_ID) | |
| return -EINVAL; | |
| return r8152_mdio_read(tp, reg); | |
| } | |
| static | |
| void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| if (phy_id != R8152_PHY_ID) | |
| return; | |
| r8152_mdio_write(tp, reg, val); | |
| } | |
| static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data) | |
| { | |
| u16 ocp_base, ocp_index; | |
| ocp_base = addr & 0xf000; | |
| if (ocp_base != tp->ocp_base) { | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base); | |
| tp->ocp_base = ocp_base; | |
| } | |
| ocp_index = (addr & 0x0fff) | 0xb000; | |
| ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data); | |
| } | |
| static | |
| int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags); | |
| static inline void set_ethernet_addr(struct r8152 *tp) | |
| { | |
| struct net_device *dev = tp->netdev; | |
| u8 node_id[8] = {0}; | |
| if (pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id) < 0) | |
| netif_notice(tp, probe, dev, "inet addr fail\n"); | |
| else { | |
| memcpy(dev->dev_addr, node_id, dev->addr_len); | |
| memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); | |
| } | |
| } | |
| static int rtl8152_set_mac_address(struct net_device *netdev, void *p) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| struct sockaddr *addr = p; | |
| if (!is_valid_ether_addr(addr->sa_data)) | |
| return -EADDRNOTAVAIL; | |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG); | |
| pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data); | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); | |
| return 0; | |
| } | |
| static struct net_device_stats *rtl8152_get_stats(struct net_device *dev) | |
| { | |
| return &dev->stats; | |
| } | |
| static void read_bulk_callback(struct urb *urb) | |
| { | |
| struct net_device *netdev; | |
| unsigned long flags; | |
| int status = urb->status; | |
| struct rx_agg *agg; | |
| struct r8152 *tp; | |
| int result; | |
| agg = urb->context; | |
| if (!agg) | |
| return; | |
| tp = agg->context; | |
| if (!tp) | |
| return; | |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) | |
| return; | |
| if (!test_bit(WORK_ENABLE, &tp->flags)) | |
| return; | |
| netdev = tp->netdev; | |
| /* When link down, the driver would cancel all bulks. */ | |
| /* This avoid the re-submitting bulk */ | |
| if (!netif_carrier_ok(netdev)) | |
| return; | |
| switch (status) { | |
| case 0: | |
| if (urb->actual_length < ETH_ZLEN) | |
| break; | |
| spin_lock_irqsave(&tp->rx_lock, flags); | |
| list_add_tail(&agg->list, &tp->rx_done); | |
| spin_unlock_irqrestore(&tp->rx_lock, flags); | |
| tasklet_schedule(&tp->tl); | |
| return; | |
| case -ESHUTDOWN: | |
| set_bit(RTL8152_UNPLUG, &tp->flags); | |
| netif_device_detach(tp->netdev); | |
| return; | |
| case -ENOENT: | |
| return; /* the urb is in unlink state */ | |
| case -ETIME: | |
| pr_warn_ratelimited("may be reset is needed?..\n"); | |
| break; | |
| default: | |
| pr_warn_ratelimited("Rx status %d\n", status); | |
| break; | |
| } | |
| result = r8152_submit_rx(tp, agg, GFP_ATOMIC); | |
| if (result == -ENODEV) { | |
| netif_device_detach(tp->netdev); | |
| } else if (result) { | |
| spin_lock_irqsave(&tp->rx_lock, flags); | |
| list_add_tail(&agg->list, &tp->rx_done); | |
| spin_unlock_irqrestore(&tp->rx_lock, flags); | |
| tasklet_schedule(&tp->tl); | |
| } | |
| } | |
| static void write_bulk_callback(struct urb *urb) | |
| { | |
| struct net_device_stats *stats; | |
| unsigned long flags; | |
| struct tx_agg *agg; | |
| struct r8152 *tp; | |
| int status = urb->status; | |
| agg = urb->context; | |
| if (!agg) | |
| return; | |
| tp = agg->context; | |
| if (!tp) | |
| return; | |
| stats = rtl8152_get_stats(tp->netdev); | |
| if (status) { | |
| pr_warn_ratelimited("Tx status %d\n", status); | |
| stats->tx_errors += agg->skb_num; | |
| } else { | |
| stats->tx_packets += agg->skb_num; | |
| stats->tx_bytes += agg->skb_len; | |
| } | |
| spin_lock_irqsave(&tp->tx_lock, flags); | |
| list_add_tail(&agg->list, &tp->tx_free); | |
| spin_unlock_irqrestore(&tp->tx_lock, flags); | |
| if (!netif_carrier_ok(tp->netdev)) | |
| return; | |
| if (!test_bit(WORK_ENABLE, &tp->flags)) | |
| return; | |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) | |
| return; | |
| if (!skb_queue_empty(&tp->tx_queue)) | |
| tasklet_schedule(&tp->tl); | |
| } | |
| static void intr_callback(struct urb *urb) | |
| { | |
| struct r8152 *tp; | |
| __u16 *d; | |
| int status = urb->status; | |
| int res; | |
| tp = urb->context; | |
| if (!tp) | |
| return; | |
| if (!test_bit(WORK_ENABLE, &tp->flags)) | |
| return; | |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) | |
| return; | |
| switch (status) { | |
| case 0: /* success */ | |
| break; | |
| case -ECONNRESET: /* unlink */ | |
| case -ESHUTDOWN: | |
| netif_device_detach(tp->netdev); | |
| case -ENOENT: | |
| return; | |
| case -EOVERFLOW: | |
| netif_info(tp, intr, tp->netdev, "intr status -EOVERFLOW\n"); | |
| goto resubmit; | |
| /* -EPIPE: should clear the halt */ | |
| default: | |
| netif_info(tp, intr, tp->netdev, "intr status %d\n", status); | |
| goto resubmit; | |
| } | |
| d = urb->transfer_buffer; | |
| if (INTR_LINK & __le16_to_cpu(d[0])) { | |
| if (!(tp->speed & LINK_STATUS)) { | |
| set_bit(RTL8152_LINK_CHG, &tp->flags); | |
| schedule_delayed_work(&tp->schedule, 0); | |
| } | |
| } else { | |
| if (tp->speed & LINK_STATUS) { | |
| set_bit(RTL8152_LINK_CHG, &tp->flags); | |
| schedule_delayed_work(&tp->schedule, 0); | |
| } | |
| } | |
| resubmit: | |
| res = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (res == -ENODEV) | |
| netif_device_detach(tp->netdev); | |
| else if (res) | |
| netif_err(tp, intr, tp->netdev, | |
| "can't resubmit intr, status %d\n", res); | |
| } | |
| static inline void *rx_agg_align(void *data) | |
| { | |
| return (void *)ALIGN((uintptr_t)data, 8); | |
| } | |
| static inline void *tx_agg_align(void *data) | |
| { | |
| return (void *)ALIGN((uintptr_t)data, 4); | |
| } | |
| static void free_all_mem(struct r8152 *tp) | |
| { | |
| int i; | |
| for (i = 0; i < RTL8152_MAX_RX; i++) { | |
| if (tp->rx_info[i].urb) { | |
| usb_free_urb(tp->rx_info[i].urb); | |
| tp->rx_info[i].urb = NULL; | |
| } | |
| if (tp->rx_info[i].buffer) { | |
| kfree(tp->rx_info[i].buffer); | |
| tp->rx_info[i].buffer = NULL; | |
| tp->rx_info[i].head = NULL; | |
| } | |
| } | |
| for (i = 0; i < RTL8152_MAX_TX; i++) { | |
| if (tp->tx_info[i].urb) { | |
| usb_free_urb(tp->tx_info[i].urb); | |
| tp->tx_info[i].urb = NULL; | |
| } | |
| if (tp->tx_info[i].buffer) { | |
| kfree(tp->tx_info[i].buffer); | |
| tp->tx_info[i].buffer = NULL; | |
| tp->tx_info[i].head = NULL; | |
| } | |
| } | |
| if (tp->intr_urb) { | |
| usb_free_urb(tp->intr_urb); | |
| tp->intr_urb = NULL; | |
| } | |
| if (tp->intr_buff) { | |
| kfree(tp->intr_buff); | |
| tp->intr_buff = NULL; | |
| } | |
| } | |
| static int alloc_all_mem(struct r8152 *tp) | |
| { | |
| struct net_device *netdev = tp->netdev; | |
| struct usb_interface *intf = tp->intf; | |
| struct usb_host_interface *alt = intf->cur_altsetting; | |
| struct usb_host_endpoint *ep_intr = alt->endpoint + 2; | |
| struct urb *urb; | |
| int node, i; | |
| u8 *buf; | |
| node = netdev->dev.parent ? dev_to_node(netdev->dev.parent) : -1; | |
| spin_lock_init(&tp->rx_lock); | |
| spin_lock_init(&tp->tx_lock); | |
| INIT_LIST_HEAD(&tp->rx_done); | |
| INIT_LIST_HEAD(&tp->tx_free); | |
| skb_queue_head_init(&tp->tx_queue); | |
| for (i = 0; i < RTL8152_MAX_RX; i++) { | |
| buf = kmalloc_node(rx_buf_sz, GFP_KERNEL, node); | |
| if (!buf) | |
| goto err1; | |
| if (buf != rx_agg_align(buf)) { | |
| kfree(buf); | |
| buf = kmalloc_node(rx_buf_sz + 8, GFP_KERNEL, node); | |
| if (!buf) | |
| goto err1; | |
| } | |
| urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!urb) { | |
| kfree(buf); | |
| goto err1; | |
| } | |
| INIT_LIST_HEAD(&tp->rx_info[i].list); | |
| tp->rx_info[i].context = tp; | |
| tp->rx_info[i].urb = urb; | |
| tp->rx_info[i].buffer = buf; | |
| tp->rx_info[i].head = rx_agg_align(buf); | |
| } | |
| for (i = 0; i < RTL8152_MAX_TX; i++) { | |
| buf = kmalloc_node(rx_buf_sz, GFP_KERNEL, node); | |
| if (!buf) | |
| goto err1; | |
| if (buf != tx_agg_align(buf)) { | |
| kfree(buf); | |
| buf = kmalloc_node(rx_buf_sz + 4, GFP_KERNEL, node); | |
| if (!buf) | |
| goto err1; | |
| } | |
| urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!urb) { | |
| kfree(buf); | |
| goto err1; | |
| } | |
| INIT_LIST_HEAD(&tp->tx_info[i].list); | |
| tp->tx_info[i].context = tp; | |
| tp->tx_info[i].urb = urb; | |
| tp->tx_info[i].buffer = buf; | |
| tp->tx_info[i].head = tx_agg_align(buf); | |
| list_add_tail(&tp->tx_info[i].list, &tp->tx_free); | |
| } | |
| tp->intr_urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!tp->intr_urb) | |
| goto err1; | |
| tp->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL); | |
| if (!tp->intr_buff) | |
| goto err1; | |
| tp->intr_interval = (int)ep_intr->desc.bInterval; | |
| usb_fill_int_urb(tp->intr_urb, tp->udev, usb_rcvintpipe(tp->udev, 3), | |
| tp->intr_buff, INTBUFSIZE, intr_callback, | |
| tp, tp->intr_interval); | |
| return 0; | |
| err1: | |
| free_all_mem(tp); | |
| return -ENOMEM; | |
| } | |
| static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp) | |
| { | |
| struct tx_agg *agg = NULL; | |
| unsigned long flags; | |
| spin_lock_irqsave(&tp->tx_lock, flags); | |
| if (!list_empty(&tp->tx_free)) { | |
| struct list_head *cursor; | |
| cursor = tp->tx_free.next; | |
| list_del_init(cursor); | |
| agg = list_entry(cursor, struct tx_agg, list); | |
| } | |
| spin_unlock_irqrestore(&tp->tx_lock, flags); | |
| return agg; | |
| } | |
| static void | |
| r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb) | |
| { | |
| memset(desc, 0, sizeof(*desc)); | |
| desc->opts1 = cpu_to_le32((skb->len & TX_LEN_MASK) | TX_FS | TX_LS); | |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { | |
| __be16 protocol; | |
| u8 ip_protocol; | |
| u32 opts2 = 0; | |
| if (skb->protocol == htons(ETH_P_8021Q)) | |
| protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto; | |
| else | |
| protocol = skb->protocol; | |
| switch (protocol) { | |
| case htons(ETH_P_IP): | |
| opts2 |= IPV4_CS; | |
| ip_protocol = ip_hdr(skb)->protocol; | |
| break; | |
| case htons(ETH_P_IPV6): | |
| opts2 |= IPV6_CS; | |
| ip_protocol = ipv6_hdr(skb)->nexthdr; | |
| break; | |
| default: | |
| ip_protocol = IPPROTO_RAW; | |
| break; | |
| } | |
| if (ip_protocol == IPPROTO_TCP) { | |
| opts2 |= TCP_CS; | |
| opts2 |= (skb_transport_offset(skb) & 0x7fff) << 17; | |
| } else if (ip_protocol == IPPROTO_UDP) { | |
| opts2 |= UDP_CS; | |
| } else { | |
| WARN_ON_ONCE(1); | |
| } | |
| desc->opts2 = cpu_to_le32(opts2); | |
| } | |
| } | |
| static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg) | |
| { | |
| u32 remain; | |
| u8 *tx_data; | |
| tx_data = agg->head; | |
| agg->skb_num = agg->skb_len = 0; | |
| remain = rx_buf_sz - sizeof(struct tx_desc); | |
| while (remain >= ETH_ZLEN) { | |
| struct tx_desc *tx_desc; | |
| struct sk_buff *skb; | |
| unsigned int len; | |
| skb = skb_dequeue(&tp->tx_queue); | |
| if (!skb) | |
| break; | |
| len = skb->len; | |
| if (remain < len) { | |
| skb_queue_head(&tp->tx_queue, skb); | |
| break; | |
| } | |
| tx_desc = (struct tx_desc *)tx_data; | |
| tx_data += sizeof(*tx_desc); | |
| r8152_tx_csum(tp, tx_desc, skb); | |
| memcpy(tx_data, skb->data, len); | |
| agg->skb_num++; | |
| agg->skb_len += len; | |
| dev_kfree_skb_any(skb); | |
| tx_data = tx_agg_align(tx_data + len); | |
| remain = rx_buf_sz - sizeof(*tx_desc) - | |
| (u32)((void *)tx_data - agg->head); | |
| } | |
| usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2), | |
| agg->head, (int)(tx_data - (u8 *)agg->head), | |
| (usb_complete_t)write_bulk_callback, agg); | |
| return usb_submit_urb(agg->urb, GFP_ATOMIC); | |
| } | |
| static void rx_bottom(struct r8152 *tp) | |
| { | |
| unsigned long flags; | |
| struct list_head *cursor, *next; | |
| spin_lock_irqsave(&tp->rx_lock, flags); | |
| list_for_each_safe(cursor, next, &tp->rx_done) { | |
| struct rx_desc *rx_desc; | |
| struct rx_agg *agg; | |
| unsigned pkt_len; | |
| int len_used = 0; | |
| struct urb *urb; | |
| u8 *rx_data; | |
| int ret; | |
| list_del_init(cursor); | |
| spin_unlock_irqrestore(&tp->rx_lock, flags); | |
| agg = list_entry(cursor, struct rx_agg, list); | |
| urb = agg->urb; | |
| if (urb->actual_length < ETH_ZLEN) | |
| goto submit; | |
| rx_desc = agg->head; | |
| rx_data = agg->head; | |
| pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK; | |
| len_used += sizeof(struct rx_desc) + pkt_len; | |
| while (urb->actual_length >= len_used) { | |
| struct net_device *netdev = tp->netdev; | |
| struct net_device_stats *stats; | |
| struct sk_buff *skb; | |
| if (pkt_len < ETH_ZLEN) | |
| break; | |
| stats = rtl8152_get_stats(netdev); | |
| pkt_len -= 4; /* CRC */ | |
| rx_data += sizeof(struct rx_desc); | |
| skb = netdev_alloc_skb_ip_align(netdev, pkt_len); | |
| if (!skb) { | |
| stats->rx_dropped++; | |
| break; | |
| } | |
| memcpy(skb->data, rx_data, pkt_len); | |
| skb_put(skb, pkt_len); | |
| skb->protocol = eth_type_trans(skb, netdev); | |
| netif_rx(skb); | |
| stats->rx_packets++; | |
| stats->rx_bytes += pkt_len; | |
| rx_data = rx_agg_align(rx_data + pkt_len + 4); | |
| rx_desc = (struct rx_desc *)rx_data; | |
| pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK; | |
| len_used = (int)(rx_data - (u8 *)agg->head); | |
| len_used += sizeof(struct rx_desc) + pkt_len; | |
| } | |
| submit: | |
| ret = r8152_submit_rx(tp, agg, GFP_ATOMIC); | |
| spin_lock_irqsave(&tp->rx_lock, flags); | |
| if (ret && ret != -ENODEV) { | |
| list_add_tail(&agg->list, next); | |
| tasklet_schedule(&tp->tl); | |
| } | |
| } | |
| spin_unlock_irqrestore(&tp->rx_lock, flags); | |
| } | |
| static void tx_bottom(struct r8152 *tp) | |
| { | |
| int res; | |
| do { | |
| struct tx_agg *agg; | |
| if (skb_queue_empty(&tp->tx_queue)) | |
| break; | |
| agg = r8152_get_tx_agg(tp); | |
| if (!agg) | |
| break; | |
| res = r8152_tx_agg_fill(tp, agg); | |
| if (res) { | |
| struct net_device_stats *stats; | |
| struct net_device *netdev; | |
| unsigned long flags; | |
| netdev = tp->netdev; | |
| stats = rtl8152_get_stats(netdev); | |
| if (res == -ENODEV) { | |
| netif_device_detach(netdev); | |
| } else { | |
| netif_warn(tp, tx_err, netdev, | |
| "failed tx_urb %d\n", res); | |
| stats->tx_dropped += agg->skb_num; | |
| spin_lock_irqsave(&tp->tx_lock, flags); | |
| list_add_tail(&agg->list, &tp->tx_free); | |
| spin_unlock_irqrestore(&tp->tx_lock, flags); | |
| } | |
| } | |
| } while (res == 0); | |
| } | |
| static void bottom_half(unsigned long data) | |
| { | |
| struct r8152 *tp; | |
| tp = (struct r8152 *)data; | |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) | |
| return; | |
| if (!test_bit(WORK_ENABLE, &tp->flags)) | |
| return; | |
| /* When link down, the driver would cancel all bulks. */ | |
| /* This avoid the re-submitting bulk */ | |
| if (!netif_carrier_ok(tp->netdev)) | |
| return; | |
| rx_bottom(tp); | |
| tx_bottom(tp); | |
| } | |
| static | |
| int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags) | |
| { | |
| usb_fill_bulk_urb(agg->urb, tp->udev, usb_rcvbulkpipe(tp->udev, 1), | |
| agg->head, rx_buf_sz, | |
| (usb_complete_t)read_bulk_callback, agg); | |
| return usb_submit_urb(agg->urb, mem_flags); | |
| } | |
| static void rtl8152_tx_timeout(struct net_device *netdev) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| int i; | |
| netif_warn(tp, tx_err, netdev, "Tx timeout.\n"); | |
| for (i = 0; i < RTL8152_MAX_TX; i++) | |
| usb_unlink_urb(tp->tx_info[i].urb); | |
| } | |
| static void rtl8152_set_rx_mode(struct net_device *netdev) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| if (tp->speed & LINK_STATUS) { | |
| set_bit(RTL8152_SET_RX_MODE, &tp->flags); | |
| schedule_delayed_work(&tp->schedule, 0); | |
| } | |
| } | |
| static void _rtl8152_set_rx_mode(struct net_device *netdev) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| u32 mc_filter[2]; /* Multicast hash filter */ | |
| __le32 tmp[2]; | |
| u32 ocp_data; | |
| clear_bit(RTL8152_SET_RX_MODE, &tp->flags); | |
| netif_stop_queue(netdev); | |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); | |
| ocp_data &= ~RCR_ACPT_ALL; | |
| ocp_data |= RCR_AB | RCR_APM; | |
| if (netdev->flags & IFF_PROMISC) { | |
| /* Unconditionally log net taps. */ | |
| netif_notice(tp, link, netdev, "Promiscuous mode enabled\n"); | |
| ocp_data |= RCR_AM | RCR_AAP; | |
| mc_filter[1] = mc_filter[0] = 0xffffffff; | |
| } else if ((netdev_mc_count(netdev) > multicast_filter_limit) || | |
| (netdev->flags & IFF_ALLMULTI)) { | |
| /* Too many to filter perfectly -- accept all multicasts. */ | |
| ocp_data |= RCR_AM; | |
| mc_filter[1] = mc_filter[0] = 0xffffffff; | |
| } else { | |
| struct netdev_hw_addr *ha; | |
| mc_filter[1] = mc_filter[0] = 0; | |
| netdev_for_each_mc_addr(ha, netdev) { | |
| int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; | |
| mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); | |
| ocp_data |= RCR_AM; | |
| } | |
| } | |
| tmp[0] = __cpu_to_le32(swab32(mc_filter[1])); | |
| tmp[1] = __cpu_to_le32(swab32(mc_filter[0])); | |
| pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); | |
| netif_wake_queue(netdev); | |
| } | |
| static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb, | |
| struct net_device *netdev) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| struct net_device_stats *stats = rtl8152_get_stats(netdev); | |
| unsigned long flags; | |
| struct tx_agg *agg = NULL; | |
| struct tx_desc *tx_desc; | |
| unsigned int len; | |
| u8 *tx_data; | |
| int res; | |
| skb_tx_timestamp(skb); | |
| /* If tx_queue is not empty, it means at least one previous packt */ | |
| /* is waiting for sending. Don't send current one before it. */ | |
| if (skb_queue_empty(&tp->tx_queue)) | |
| agg = r8152_get_tx_agg(tp); | |
| if (!agg) { | |
| skb_queue_tail(&tp->tx_queue, skb); | |
| return NETDEV_TX_OK; | |
| } | |
| tx_desc = (struct tx_desc *)agg->head; | |
| tx_data = agg->head + sizeof(*tx_desc); | |
| agg->skb_num = agg->skb_len = 0; | |
| len = skb->len; | |
| r8152_tx_csum(tp, tx_desc, skb); | |
| memcpy(tx_data, skb->data, len); | |
| dev_kfree_skb_any(skb); | |
| agg->skb_num++; | |
| agg->skb_len += len; | |
| usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2), | |
| agg->head, len + sizeof(*tx_desc), | |
| (usb_complete_t)write_bulk_callback, agg); | |
| res = usb_submit_urb(agg->urb, GFP_ATOMIC); | |
| if (res) { | |
| /* Can we get/handle EPIPE here? */ | |
| if (res == -ENODEV) { | |
| netif_device_detach(tp->netdev); | |
| } else { | |
| netif_warn(tp, tx_err, netdev, | |
| "failed tx_urb %d\n", res); | |
| stats->tx_dropped++; | |
| spin_lock_irqsave(&tp->tx_lock, flags); | |
| list_add_tail(&agg->list, &tp->tx_free); | |
| spin_unlock_irqrestore(&tp->tx_lock, flags); | |
| } | |
| } | |
| return NETDEV_TX_OK; | |
| } | |
| static void r8152b_reset_packet_filter(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC); | |
| ocp_data &= ~FMC_FCR_MCU_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data); | |
| ocp_data |= FMC_FCR_MCU_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data); | |
| } | |
| static void rtl8152_nic_reset(struct r8152 *tp) | |
| { | |
| int i; | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST); | |
| for (i = 0; i < 1000; i++) { | |
| if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST)) | |
| break; | |
| udelay(100); | |
| } | |
| } | |
| static inline u8 rtl8152_get_speed(struct r8152 *tp) | |
| { | |
| return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS); | |
| } | |
| static int rtl8152_enable(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| int i, ret; | |
| u8 speed; | |
| speed = rtl8152_get_speed(tp); | |
| if (speed & _10bps) { | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); | |
| ocp_data |= EEEP_CR_EEEP_TX; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); | |
| } else { | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR); | |
| ocp_data &= ~EEEP_CR_EEEP_TX; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data); | |
| } | |
| r8152b_reset_packet_filter(tp); | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR); | |
| ocp_data |= CR_RE | CR_TE; | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); | |
| ocp_data &= ~RXDY_GATED_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); | |
| INIT_LIST_HEAD(&tp->rx_done); | |
| ret = 0; | |
| for (i = 0; i < RTL8152_MAX_RX; i++) { | |
| INIT_LIST_HEAD(&tp->rx_info[i].list); | |
| ret |= r8152_submit_rx(tp, &tp->rx_info[i], GFP_KERNEL); | |
| } | |
| return ret; | |
| } | |
| static void rtl8152_disable(struct r8152 *tp) | |
| { | |
| struct net_device_stats *stats = rtl8152_get_stats(tp->netdev); | |
| struct sk_buff *skb; | |
| u32 ocp_data; | |
| int i; | |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); | |
| ocp_data &= ~RCR_ACPT_ALL; | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); | |
| while ((skb = skb_dequeue(&tp->tx_queue))) { | |
| dev_kfree_skb(skb); | |
| stats->tx_dropped++; | |
| } | |
| for (i = 0; i < RTL8152_MAX_TX; i++) | |
| usb_kill_urb(tp->tx_info[i].urb); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); | |
| ocp_data |= RXDY_GATED_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); | |
| for (i = 0; i < 1000; i++) { | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | |
| if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY) | |
| break; | |
| mdelay(1); | |
| } | |
| for (i = 0; i < 1000; i++) { | |
| if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY) | |
| break; | |
| mdelay(1); | |
| } | |
| for (i = 0; i < RTL8152_MAX_RX; i++) | |
| usb_kill_urb(tp->rx_info[i].urb); | |
| rtl8152_nic_reset(tp); | |
| } | |
| static void r8152b_exit_oob(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| int i; | |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); | |
| ocp_data &= ~RCR_ACPT_ALL; | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); | |
| ocp_data |= RXDY_GATED_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML); | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00); | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | |
| ocp_data &= ~NOW_IS_OOB; | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); | |
| ocp_data &= ~MCU_BORW_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); | |
| for (i = 0; i < 1000; i++) { | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | |
| if (ocp_data & LINK_LIST_READY) | |
| break; | |
| mdelay(1); | |
| } | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); | |
| ocp_data |= RE_INIT_LL; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); | |
| for (i = 0; i < 1000; i++) { | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | |
| if (ocp_data & LINK_LIST_READY) | |
| break; | |
| mdelay(1); | |
| } | |
| rtl8152_nic_reset(tp); | |
| /* rx share fifo credit full threshold */ | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_DEV_STAT); | |
| ocp_data &= STAT_SPEED_MASK; | |
| if (ocp_data == STAT_SPEED_FULL) { | |
| /* rx share fifo credit near full threshold */ | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, | |
| RXFIFO_THR2_FULL); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, | |
| RXFIFO_THR3_FULL); | |
| } else { | |
| /* rx share fifo credit near full threshold */ | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, | |
| RXFIFO_THR2_HIGH); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, | |
| RXFIFO_THR3_HIGH); | |
| } | |
| /* TX share fifo free credit full threshold */ | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL); | |
| ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD); | |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_BUF_THR); | |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA, | |
| TEST_MODE_DISABLE | TX_SIZE_ADJUST1); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); | |
| ocp_data &= ~CPCR_RX_VLAN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0); | |
| ocp_data |= TCR0_AUTO_FIFO; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data); | |
| } | |
| static void r8152b_enter_oob(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| int i; | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | |
| ocp_data &= ~NOW_IS_OOB; | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB); | |
| rtl8152_disable(tp); | |
| for (i = 0; i < 1000; i++) { | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | |
| if (ocp_data & LINK_LIST_READY) | |
| break; | |
| mdelay(1); | |
| } | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7); | |
| ocp_data |= RE_INIT_LL; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data); | |
| for (i = 0; i < 1000; i++) { | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | |
| if (ocp_data & LINK_LIST_READY) | |
| break; | |
| mdelay(1); | |
| } | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL); | |
| ocp_data |= MAGIC_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR); | |
| ocp_data |= CPCR_RX_VLAN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); | |
| ocp_data |= ALDPS_PROXY_MODE; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); | |
| ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); | |
| ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data); | |
| ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1); | |
| ocp_data &= ~RXDY_GATED_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data); | |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); | |
| ocp_data |= RCR_APM | RCR_AM | RCR_AB; | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); | |
| } | |
| static void r8152b_disable_aldps(struct r8152 *tp) | |
| { | |
| ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA | DIS_SDSAVE); | |
| msleep(20); | |
| } | |
| static inline void r8152b_enable_aldps(struct r8152 *tp) | |
| { | |
| ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS | | |
| LINKENA | DIS_SDSAVE); | |
| } | |
| static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) | |
| { | |
| u16 bmcr, anar; | |
| int ret = 0; | |
| cancel_delayed_work_sync(&tp->schedule); | |
| anar = r8152_mdio_read(tp, MII_ADVERTISE); | |
| anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | | |
| ADVERTISE_100HALF | ADVERTISE_100FULL); | |
| if (autoneg == AUTONEG_DISABLE) { | |
| if (speed == SPEED_10) { | |
| bmcr = 0; | |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; | |
| } else if (speed == SPEED_100) { | |
| bmcr = BMCR_SPEED100; | |
| anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; | |
| } else { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (duplex == DUPLEX_FULL) | |
| bmcr |= BMCR_FULLDPLX; | |
| } else { | |
| if (speed == SPEED_10) { | |
| if (duplex == DUPLEX_FULL) | |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; | |
| else | |
| anar |= ADVERTISE_10HALF; | |
| } else if (speed == SPEED_100) { | |
| if (duplex == DUPLEX_FULL) { | |
| anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; | |
| anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; | |
| } else { | |
| anar |= ADVERTISE_10HALF; | |
| anar |= ADVERTISE_100HALF; | |
| } | |
| } else { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| bmcr = BMCR_ANENABLE | BMCR_ANRESTART; | |
| } | |
| r8152_mdio_write(tp, MII_ADVERTISE, anar); | |
| r8152_mdio_write(tp, MII_BMCR, bmcr); | |
| out: | |
| return ret; | |
| } | |
| static void rtl8152_down(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); | |
| ocp_data &= ~POWER_CUT; | |
| ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); | |
| r8152b_disable_aldps(tp); | |
| r8152b_enter_oob(tp); | |
| r8152b_enable_aldps(tp); | |
| } | |
| static void set_carrier(struct r8152 *tp) | |
| { | |
| struct net_device *netdev = tp->netdev; | |
| u8 speed; | |
| clear_bit(RTL8152_LINK_CHG, &tp->flags); | |
| speed = rtl8152_get_speed(tp); | |
| if (speed & LINK_STATUS) { | |
| if (!(tp->speed & LINK_STATUS)) { | |
| rtl8152_enable(tp); | |
| set_bit(RTL8152_SET_RX_MODE, &tp->flags); | |
| netif_carrier_on(netdev); | |
| } | |
| } else { | |
| if (tp->speed & LINK_STATUS) { | |
| netif_carrier_off(netdev); | |
| tasklet_disable(&tp->tl); | |
| rtl8152_disable(tp); | |
| tasklet_enable(&tp->tl); | |
| } | |
| } | |
| tp->speed = speed; | |
| } | |
| static void rtl_work_func_t(struct work_struct *work) | |
| { | |
| struct r8152 *tp = container_of(work, struct r8152, schedule.work); | |
| if (!test_bit(WORK_ENABLE, &tp->flags)) | |
| goto out1; | |
| if (test_bit(RTL8152_UNPLUG, &tp->flags)) | |
| goto out1; | |
| if (test_bit(RTL8152_LINK_CHG, &tp->flags)) | |
| set_carrier(tp); | |
| if (test_bit(RTL8152_SET_RX_MODE, &tp->flags)) | |
| _rtl8152_set_rx_mode(tp->netdev); | |
| out1: | |
| return; | |
| } | |
| static int rtl8152_open(struct net_device *netdev) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| int res = 0; | |
| res = usb_submit_urb(tp->intr_urb, GFP_KERNEL); | |
| if (res) { | |
| if (res == -ENODEV) | |
| netif_device_detach(tp->netdev); | |
| netif_warn(tp, ifup, netdev, | |
| "intr_urb submit failed: %d\n", res); | |
| return res; | |
| } | |
| rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL); | |
| tp->speed = 0; | |
| netif_carrier_off(netdev); | |
| netif_start_queue(netdev); | |
| set_bit(WORK_ENABLE, &tp->flags); | |
| return res; | |
| } | |
| static int rtl8152_close(struct net_device *netdev) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| int res = 0; | |
| usb_kill_urb(tp->intr_urb); | |
| clear_bit(WORK_ENABLE, &tp->flags); | |
| cancel_delayed_work_sync(&tp->schedule); | |
| netif_stop_queue(netdev); | |
| tasklet_disable(&tp->tl); | |
| rtl8152_disable(tp); | |
| tasklet_enable(&tp->tl); | |
| return res; | |
| } | |
| static void rtl_clear_bp(struct r8152 *tp) | |
| { | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_0, 0); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_2, 0); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_4, 0); | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_BP_6, 0); | |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_0, 0); | |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_2, 0); | |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_4, 0); | |
| ocp_write_dword(tp, MCU_TYPE_USB, USB_BP_6, 0); | |
| mdelay(3); | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_BA, 0); | |
| ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0); | |
| } | |
| static void r8152b_enable_eee(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR); | |
| ocp_data |= EEE_RX_EN | EEE_TX_EN; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data); | |
| ocp_reg_write(tp, OCP_EEE_CONFIG1, RG_TXLPI_MSK_HFDUP | RG_MATCLR_EN | | |
| EEE_10_CAP | EEE_NWAY_EN | | |
| TX_QUIET_EN | RX_QUIET_EN | | |
| SDRISETIME | RG_RXLPI_MSK_HFDUP | | |
| SDFALLTIME); | |
| ocp_reg_write(tp, OCP_EEE_CONFIG2, RG_LPIHYS_NUM | RG_DACQUIET_EN | | |
| RG_LDVQUIET_EN | RG_CKRSEL | | |
| RG_EEEPRG_EN); | |
| ocp_reg_write(tp, OCP_EEE_CONFIG3, FST_SNR_EYE_R | RG_LFS_SEL | MSK_PH); | |
| ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | DEVICE_ADDR); | |
| ocp_reg_write(tp, OCP_EEE_DATA, EEE_ADDR); | |
| ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | DEVICE_ADDR); | |
| ocp_reg_write(tp, OCP_EEE_DATA, EEE_DATA); | |
| ocp_reg_write(tp, OCP_EEE_AR, 0x0000); | |
| } | |
| static void r8152b_enable_fc(struct r8152 *tp) | |
| { | |
| u16 anar; | |
| anar = r8152_mdio_read(tp, MII_ADVERTISE); | |
| anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; | |
| r8152_mdio_write(tp, MII_ADVERTISE, anar); | |
| } | |
| static void r8152b_hw_phy_cfg(struct r8152 *tp) | |
| { | |
| r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE); | |
| r8152b_disable_aldps(tp); | |
| } | |
| static void r8152b_init(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| int i; | |
| rtl_clear_bp(tp); | |
| if (tp->version == RTL_VER_01) { | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE); | |
| ocp_data &= ~LED_MODE_MASK; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data); | |
| } | |
| r8152b_hw_phy_cfg(tp); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); | |
| ocp_data &= ~POWER_CUT; | |
| ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); | |
| ocp_data &= ~RWSUME_INDICATE; | |
| ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); | |
| r8152b_exit_oob(tp); | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); | |
| ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); | |
| ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL); | |
| ocp_data &= ~MCU_CLK_RATIO_MASK; | |
| ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN; | |
| ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data); | |
| ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK | | |
| SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK; | |
| ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data); | |
| r8152b_enable_eee(tp); | |
| r8152b_enable_aldps(tp); | |
| r8152b_enable_fc(tp); | |
| r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE | | |
| BMCR_ANRESTART); | |
| for (i = 0; i < 100; i++) { | |
| udelay(100); | |
| if (!(r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET)) | |
| break; | |
| } | |
| /* enable rx aggregation */ | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); | |
| ocp_data &= ~RX_AGG_DISABLE; | |
| ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); | |
| } | |
| static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) | |
| { | |
| struct r8152 *tp = usb_get_intfdata(intf); | |
| netif_device_detach(tp->netdev); | |
| if (netif_running(tp->netdev)) { | |
| clear_bit(WORK_ENABLE, &tp->flags); | |
| usb_kill_urb(tp->intr_urb); | |
| cancel_delayed_work_sync(&tp->schedule); | |
| tasklet_disable(&tp->tl); | |
| } | |
| rtl8152_down(tp); | |
| return 0; | |
| } | |
| static int rtl8152_resume(struct usb_interface *intf) | |
| { | |
| struct r8152 *tp = usb_get_intfdata(intf); | |
| r8152b_init(tp); | |
| netif_device_attach(tp->netdev); | |
| if (netif_running(tp->netdev)) { | |
| rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL); | |
| tp->speed = 0; | |
| netif_carrier_off(tp->netdev); | |
| set_bit(WORK_ENABLE, &tp->flags); | |
| usb_submit_urb(tp->intr_urb, GFP_KERNEL); | |
| tasklet_enable(&tp->tl); | |
| } | |
| return 0; | |
| } | |
| static void rtl8152_get_drvinfo(struct net_device *netdev, | |
| struct ethtool_drvinfo *info) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| strncpy(info->driver, MODULENAME, ETHTOOL_BUSINFO_LEN); | |
| strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN); | |
| usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info)); | |
| } | |
| static | |
| int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| if (!tp->mii.mdio_read) | |
| return -EOPNOTSUPP; | |
| return mii_ethtool_gset(&tp->mii, cmd); | |
| } | |
| static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | |
| { | |
| struct r8152 *tp = netdev_priv(dev); | |
| return rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex); | |
| } | |
| static struct ethtool_ops ops = { | |
| .get_drvinfo = rtl8152_get_drvinfo, | |
| .get_settings = rtl8152_get_settings, | |
| .set_settings = rtl8152_set_settings, | |
| .get_link = ethtool_op_get_link, | |
| }; | |
| static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) | |
| { | |
| struct r8152 *tp = netdev_priv(netdev); | |
| struct mii_ioctl_data *data = if_mii(rq); | |
| int res = 0; | |
| switch (cmd) { | |
| case SIOCGMIIPHY: | |
| data->phy_id = R8152_PHY_ID; /* Internal PHY */ | |
| break; | |
| case SIOCGMIIREG: | |
| data->val_out = r8152_mdio_read(tp, data->reg_num); | |
| break; | |
| case SIOCSMIIREG: | |
| if (!capable(CAP_NET_ADMIN)) { | |
| res = -EPERM; | |
| break; | |
| } | |
| r8152_mdio_write(tp, data->reg_num, data->val_in); | |
| break; | |
| default: | |
| res = -EOPNOTSUPP; | |
| } | |
| return res; | |
| } | |
| static const struct net_device_ops rtl8152_netdev_ops = { | |
| .ndo_open = rtl8152_open, | |
| .ndo_stop = rtl8152_close, | |
| .ndo_do_ioctl = rtl8152_ioctl, | |
| .ndo_start_xmit = rtl8152_start_xmit, | |
| .ndo_tx_timeout = rtl8152_tx_timeout, | |
| .ndo_set_rx_mode = rtl8152_set_rx_mode, | |
| .ndo_set_mac_address = rtl8152_set_mac_address, | |
| .ndo_change_mtu = eth_change_mtu, | |
| .ndo_validate_addr = eth_validate_addr, | |
| }; | |
| static void r8152b_get_version(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| u16 version; | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1); | |
| version = (u16)(ocp_data & VERSION_MASK); | |
| switch (version) { | |
| case 0x4c00: | |
| tp->version = RTL_VER_01; | |
| break; | |
| case 0x4c10: | |
| tp->version = RTL_VER_02; | |
| break; | |
| default: | |
| netif_info(tp, probe, tp->netdev, | |
| "Unknown version 0x%04x\n", version); | |
| break; | |
| } | |
| } | |
| static int rtl8152_probe(struct usb_interface *intf, | |
| const struct usb_device_id *id) | |
| { | |
| struct usb_device *udev = interface_to_usbdev(intf); | |
| struct r8152 *tp; | |
| struct net_device *netdev; | |
| int ret; | |
| if (udev->actconfig->desc.bConfigurationValue != 1) { | |
| usb_driver_set_configuration(udev, 1); | |
| return -ENODEV; | |
| } | |
| netdev = alloc_etherdev(sizeof(struct r8152)); | |
| if (!netdev) { | |
| dev_err(&intf->dev, "Out of memory"); | |
| return -ENOMEM; | |
| } | |
| SET_NETDEV_DEV(netdev, &intf->dev); | |
| tp = netdev_priv(netdev); | |
| tp->msg_enable = 0x7FFF; | |
| tasklet_init(&tp->tl, bottom_half, (unsigned long)tp); | |
| INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t); | |
| tp->udev = udev; | |
| tp->netdev = netdev; | |
| tp->intf = intf; | |
| netdev->netdev_ops = &rtl8152_netdev_ops; | |
| netdev->watchdog_timeo = RTL8152_TX_TIMEOUT; | |
| netdev->features |= NETIF_F_IP_CSUM; | |
| netdev->hw_features = NETIF_F_IP_CSUM; | |
| SET_ETHTOOL_OPS(netdev, &ops); | |
| tp->mii.dev = netdev; | |
| tp->mii.mdio_read = read_mii_word; | |
| tp->mii.mdio_write = write_mii_word; | |
| tp->mii.phy_id_mask = 0x3f; | |
| tp->mii.reg_num_mask = 0x1f; | |
| tp->mii.phy_id = R8152_PHY_ID; | |
| tp->mii.supports_gmii = 0; | |
| r8152b_get_version(tp); | |
| r8152b_init(tp); | |
| set_ethernet_addr(tp); | |
| ret = alloc_all_mem(tp); | |
| if (ret) | |
| goto out; | |
| usb_set_intfdata(intf, tp); | |
| ret = register_netdev(netdev); | |
| if (ret != 0) { | |
| netif_err(tp, probe, netdev, "couldn't register the device"); | |
| goto out1; | |
| } | |
| netif_info(tp, probe, netdev, "%s", DRIVER_VERSION); | |
| return 0; | |
| out1: | |
| usb_set_intfdata(intf, NULL); | |
| out: | |
| free_netdev(netdev); | |
| return ret; | |
| } | |
| static void rtl8152_unload(struct r8152 *tp) | |
| { | |
| u32 ocp_data; | |
| if (tp->version != RTL_VER_01) { | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL); | |
| ocp_data |= POWER_CUT; | |
| ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data); | |
| } | |
| ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS); | |
| ocp_data &= ~RWSUME_INDICATE; | |
| ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data); | |
| } | |
| static void rtl8152_disconnect(struct usb_interface *intf) | |
| { | |
| struct r8152 *tp = usb_get_intfdata(intf); | |
| usb_set_intfdata(intf, NULL); | |
| if (tp) { | |
| set_bit(RTL8152_UNPLUG, &tp->flags); | |
| tasklet_kill(&tp->tl); | |
| unregister_netdev(tp->netdev); | |
| rtl8152_unload(tp); | |
| free_all_mem(tp); | |
| free_netdev(tp->netdev); | |
| } | |
| } | |
| /* table of devices that work with this driver */ | |
| static struct usb_device_id rtl8152_table[] = { | |
| {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)}, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(usb, rtl8152_table); | |
| static struct usb_driver rtl8152_driver = { | |
| .name = MODULENAME, | |
| .id_table = rtl8152_table, | |
| .probe = rtl8152_probe, | |
| .disconnect = rtl8152_disconnect, | |
| .suspend = rtl8152_suspend, | |
| .resume = rtl8152_resume, | |
| .reset_resume = rtl8152_resume, | |
| }; | |
| module_usb_driver(rtl8152_driver); | |
| MODULE_AUTHOR(DRIVER_AUTHOR); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_LICENSE("GPL"); |