| /* | |
| * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO) | |
| * | |
| * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren | |
| * | |
| * This driver is inspired by: | |
| * pinctrl-nomadik.c, please see original file for copyright information | |
| * pinctrl-tegra.c, please see original file for copyright information | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/bitmap.h> | |
| #include <linux/bug.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/gpio.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdesc.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/module.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/pinctrl/consumer.h> | |
| #include <linux/pinctrl/machine.h> | |
| #include <linux/pinctrl/pinconf.h> | |
| #include <linux/pinctrl/pinctrl.h> | |
| #include <linux/pinctrl/pinmux.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/types.h> | |
| #define MODULE_NAME "pinctrl-bcm2835" | |
| #define BCM2835_NUM_GPIOS 54 | |
| #define BCM2835_NUM_BANKS 2 | |
| #define BCM2835_PIN_BITMAP_SZ \ | |
| DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8) | |
| /* GPIO register offsets */ | |
| #define GPFSEL0 0x0 /* Function Select */ | |
| #define GPSET0 0x1c /* Pin Output Set */ | |
| #define GPCLR0 0x28 /* Pin Output Clear */ | |
| #define GPLEV0 0x34 /* Pin Level */ | |
| #define GPEDS0 0x40 /* Pin Event Detect Status */ | |
| #define GPREN0 0x4c /* Pin Rising Edge Detect Enable */ | |
| #define GPFEN0 0x58 /* Pin Falling Edge Detect Enable */ | |
| #define GPHEN0 0x64 /* Pin High Detect Enable */ | |
| #define GPLEN0 0x70 /* Pin Low Detect Enable */ | |
| #define GPAREN0 0x7c /* Pin Async Rising Edge Detect */ | |
| #define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */ | |
| #define GPPUD 0x94 /* Pin Pull-up/down Enable */ | |
| #define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */ | |
| #define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4)) | |
| #define FSEL_SHIFT(p) (((p) % 10) * 3) | |
| #define GPIO_REG_OFFSET(p) ((p) / 32) | |
| #define GPIO_REG_SHIFT(p) ((p) % 32) | |
| enum bcm2835_pinconf_param { | |
| /* argument: bcm2835_pinconf_pull */ | |
| BCM2835_PINCONF_PARAM_PULL, | |
| }; | |
| enum bcm2835_pinconf_pull { | |
| BCM2835_PINCONFIG_PULL_NONE, | |
| BCM2835_PINCONFIG_PULL_DOWN, | |
| BCM2835_PINCONFIG_PULL_UP, | |
| }; | |
| #define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_)) | |
| #define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16) | |
| #define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff) | |
| struct bcm2835_gpio_irqdata { | |
| struct bcm2835_pinctrl *pc; | |
| int bank; | |
| }; | |
| struct bcm2835_pinctrl { | |
| struct device *dev; | |
| void __iomem *base; | |
| int irq[BCM2835_NUM_BANKS]; | |
| /* note: locking assumes each bank will have its own unsigned long */ | |
| unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; | |
| unsigned int irq_type[BCM2835_NUM_GPIOS]; | |
| struct pinctrl_dev *pctl_dev; | |
| struct irq_domain *irq_domain; | |
| struct gpio_chip gpio_chip; | |
| struct pinctrl_gpio_range gpio_range; | |
| struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS]; | |
| spinlock_t irq_lock[BCM2835_NUM_BANKS]; | |
| }; | |
| static struct lock_class_key gpio_lock_class; | |
| /* pins are just named GPIO0..GPIO53 */ | |
| #define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a) | |
| static struct pinctrl_pin_desc bcm2835_gpio_pins[] = { | |
| BCM2835_GPIO_PIN(0), | |
| BCM2835_GPIO_PIN(1), | |
| BCM2835_GPIO_PIN(2), | |
| BCM2835_GPIO_PIN(3), | |
| BCM2835_GPIO_PIN(4), | |
| BCM2835_GPIO_PIN(5), | |
| BCM2835_GPIO_PIN(6), | |
| BCM2835_GPIO_PIN(7), | |
| BCM2835_GPIO_PIN(8), | |
| BCM2835_GPIO_PIN(9), | |
| BCM2835_GPIO_PIN(10), | |
| BCM2835_GPIO_PIN(11), | |
| BCM2835_GPIO_PIN(12), | |
| BCM2835_GPIO_PIN(13), | |
| BCM2835_GPIO_PIN(14), | |
| BCM2835_GPIO_PIN(15), | |
| BCM2835_GPIO_PIN(16), | |
| BCM2835_GPIO_PIN(17), | |
| BCM2835_GPIO_PIN(18), | |
| BCM2835_GPIO_PIN(19), | |
| BCM2835_GPIO_PIN(20), | |
| BCM2835_GPIO_PIN(21), | |
| BCM2835_GPIO_PIN(22), | |
| BCM2835_GPIO_PIN(23), | |
| BCM2835_GPIO_PIN(24), | |
| BCM2835_GPIO_PIN(25), | |
| BCM2835_GPIO_PIN(26), | |
| BCM2835_GPIO_PIN(27), | |
| BCM2835_GPIO_PIN(28), | |
| BCM2835_GPIO_PIN(29), | |
| BCM2835_GPIO_PIN(30), | |
| BCM2835_GPIO_PIN(31), | |
| BCM2835_GPIO_PIN(32), | |
| BCM2835_GPIO_PIN(33), | |
| BCM2835_GPIO_PIN(34), | |
| BCM2835_GPIO_PIN(35), | |
| BCM2835_GPIO_PIN(36), | |
| BCM2835_GPIO_PIN(37), | |
| BCM2835_GPIO_PIN(38), | |
| BCM2835_GPIO_PIN(39), | |
| BCM2835_GPIO_PIN(40), | |
| BCM2835_GPIO_PIN(41), | |
| BCM2835_GPIO_PIN(42), | |
| BCM2835_GPIO_PIN(43), | |
| BCM2835_GPIO_PIN(44), | |
| BCM2835_GPIO_PIN(45), | |
| BCM2835_GPIO_PIN(46), | |
| BCM2835_GPIO_PIN(47), | |
| BCM2835_GPIO_PIN(48), | |
| BCM2835_GPIO_PIN(49), | |
| BCM2835_GPIO_PIN(50), | |
| BCM2835_GPIO_PIN(51), | |
| BCM2835_GPIO_PIN(52), | |
| BCM2835_GPIO_PIN(53), | |
| }; | |
| /* one pin per group */ | |
| static const char * const bcm2835_gpio_groups[] = { | |
| "gpio0", | |
| "gpio1", | |
| "gpio2", | |
| "gpio3", | |
| "gpio4", | |
| "gpio5", | |
| "gpio6", | |
| "gpio7", | |
| "gpio8", | |
| "gpio9", | |
| "gpio10", | |
| "gpio11", | |
| "gpio12", | |
| "gpio13", | |
| "gpio14", | |
| "gpio15", | |
| "gpio16", | |
| "gpio17", | |
| "gpio18", | |
| "gpio19", | |
| "gpio20", | |
| "gpio21", | |
| "gpio22", | |
| "gpio23", | |
| "gpio24", | |
| "gpio25", | |
| "gpio26", | |
| "gpio27", | |
| "gpio28", | |
| "gpio29", | |
| "gpio30", | |
| "gpio31", | |
| "gpio32", | |
| "gpio33", | |
| "gpio34", | |
| "gpio35", | |
| "gpio36", | |
| "gpio37", | |
| "gpio38", | |
| "gpio39", | |
| "gpio40", | |
| "gpio41", | |
| "gpio42", | |
| "gpio43", | |
| "gpio44", | |
| "gpio45", | |
| "gpio46", | |
| "gpio47", | |
| "gpio48", | |
| "gpio49", | |
| "gpio50", | |
| "gpio51", | |
| "gpio52", | |
| "gpio53", | |
| }; | |
| enum bcm2835_fsel { | |
| BCM2835_FSEL_GPIO_IN = 0, | |
| BCM2835_FSEL_GPIO_OUT = 1, | |
| BCM2835_FSEL_ALT0 = 4, | |
| BCM2835_FSEL_ALT1 = 5, | |
| BCM2835_FSEL_ALT2 = 6, | |
| BCM2835_FSEL_ALT3 = 7, | |
| BCM2835_FSEL_ALT4 = 3, | |
| BCM2835_FSEL_ALT5 = 2, | |
| BCM2835_FSEL_COUNT = 8, | |
| BCM2835_FSEL_MASK = 0x7, | |
| }; | |
| static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = { | |
| [BCM2835_FSEL_GPIO_IN] = "gpio_in", | |
| [BCM2835_FSEL_GPIO_OUT] = "gpio_out", | |
| [BCM2835_FSEL_ALT0] = "alt0", | |
| [BCM2835_FSEL_ALT1] = "alt1", | |
| [BCM2835_FSEL_ALT2] = "alt2", | |
| [BCM2835_FSEL_ALT3] = "alt3", | |
| [BCM2835_FSEL_ALT4] = "alt4", | |
| [BCM2835_FSEL_ALT5] = "alt5", | |
| }; | |
| static const char * const irq_type_names[] = { | |
| [IRQ_TYPE_NONE] = "none", | |
| [IRQ_TYPE_EDGE_RISING] = "edge-rising", | |
| [IRQ_TYPE_EDGE_FALLING] = "edge-falling", | |
| [IRQ_TYPE_EDGE_BOTH] = "edge-both", | |
| [IRQ_TYPE_LEVEL_HIGH] = "level-high", | |
| [IRQ_TYPE_LEVEL_LOW] = "level-low", | |
| }; | |
| static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg) | |
| { | |
| return readl(pc->base + reg); | |
| } | |
| static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg, | |
| u32 val) | |
| { | |
| writel(val, pc->base + reg); | |
| } | |
| static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg, | |
| unsigned bit) | |
| { | |
| reg += GPIO_REG_OFFSET(bit) * 4; | |
| return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1; | |
| } | |
| /* note NOT a read/modify/write cycle */ | |
| static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc, | |
| unsigned reg, unsigned bit) | |
| { | |
| reg += GPIO_REG_OFFSET(bit) * 4; | |
| bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit))); | |
| } | |
| static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get( | |
| struct bcm2835_pinctrl *pc, unsigned pin) | |
| { | |
| u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin)); | |
| enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK; | |
| dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin, | |
| bcm2835_functions[status]); | |
| return status; | |
| } | |
| static inline void bcm2835_pinctrl_fsel_set( | |
| struct bcm2835_pinctrl *pc, unsigned pin, | |
| enum bcm2835_fsel fsel) | |
| { | |
| u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin)); | |
| enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK; | |
| dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin, | |
| bcm2835_functions[cur]); | |
| if (cur == fsel) | |
| return; | |
| if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) { | |
| /* always transition through GPIO_IN */ | |
| val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin)); | |
| val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin); | |
| dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin, | |
| bcm2835_functions[BCM2835_FSEL_GPIO_IN]); | |
| bcm2835_gpio_wr(pc, FSEL_REG(pin), val); | |
| } | |
| val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin)); | |
| val |= fsel << FSEL_SHIFT(pin); | |
| dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin, | |
| bcm2835_functions[fsel]); | |
| bcm2835_gpio_wr(pc, FSEL_REG(pin), val); | |
| } | |
| static int bcm2835_gpio_request(struct gpio_chip *chip, unsigned offset) | |
| { | |
| return pinctrl_request_gpio(chip->base + offset); | |
| } | |
| static void bcm2835_gpio_free(struct gpio_chip *chip, unsigned offset) | |
| { | |
| pinctrl_free_gpio(chip->base + offset); | |
| } | |
| static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| return pinctrl_gpio_direction_input(chip->base + offset); | |
| } | |
| static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); | |
| return bcm2835_gpio_get_bit(pc, GPLEV0, offset); | |
| } | |
| static int bcm2835_gpio_direction_output(struct gpio_chip *chip, | |
| unsigned offset, int value) | |
| { | |
| return pinctrl_gpio_direction_output(chip->base + offset); | |
| } | |
| static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | |
| { | |
| struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); | |
| bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset); | |
| } | |
| static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev); | |
| return irq_linear_revmap(pc->irq_domain, offset); | |
| } | |
| static struct gpio_chip bcm2835_gpio_chip = { | |
| .label = MODULE_NAME, | |
| .owner = THIS_MODULE, | |
| .request = bcm2835_gpio_request, | |
| .free = bcm2835_gpio_free, | |
| .direction_input = bcm2835_gpio_direction_input, | |
| .direction_output = bcm2835_gpio_direction_output, | |
| .get = bcm2835_gpio_get, | |
| .set = bcm2835_gpio_set, | |
| .to_irq = bcm2835_gpio_to_irq, | |
| .base = -1, | |
| .ngpio = BCM2835_NUM_GPIOS, | |
| .can_sleep = 0, | |
| }; | |
| static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id) | |
| { | |
| struct bcm2835_gpio_irqdata *irqdata = dev_id; | |
| struct bcm2835_pinctrl *pc = irqdata->pc; | |
| int bank = irqdata->bank; | |
| unsigned long events; | |
| unsigned offset; | |
| unsigned gpio; | |
| unsigned int type; | |
| events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4); | |
| events &= pc->enabled_irq_map[bank]; | |
| for_each_set_bit(offset, &events, 32) { | |
| gpio = (32 * bank) + offset; | |
| type = pc->irq_type[gpio]; | |
| /* ack edge triggered IRQs immediately */ | |
| if (!(type & IRQ_TYPE_LEVEL_MASK)) | |
| bcm2835_gpio_set_bit(pc, GPEDS0, gpio); | |
| generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio)); | |
| /* ack level triggered IRQ after handling them */ | |
| if (type & IRQ_TYPE_LEVEL_MASK) | |
| bcm2835_gpio_set_bit(pc, GPEDS0, gpio); | |
| } | |
| return events ? IRQ_HANDLED : IRQ_NONE; | |
| } | |
| static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, | |
| unsigned reg, unsigned offset, bool enable) | |
| { | |
| u32 value; | |
| reg += GPIO_REG_OFFSET(offset) * 4; | |
| value = bcm2835_gpio_rd(pc, reg); | |
| if (enable) | |
| value |= BIT(GPIO_REG_SHIFT(offset)); | |
| else | |
| value &= ~(BIT(GPIO_REG_SHIFT(offset))); | |
| bcm2835_gpio_wr(pc, reg, value); | |
| } | |
| /* fast path for IRQ handler */ | |
| static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, | |
| unsigned offset, bool enable) | |
| { | |
| switch (pc->irq_type[offset]) { | |
| case IRQ_TYPE_EDGE_RISING: | |
| __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable); | |
| break; | |
| case IRQ_TYPE_EDGE_FALLING: | |
| __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable); | |
| break; | |
| case IRQ_TYPE_EDGE_BOTH: | |
| __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable); | |
| __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable); | |
| break; | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable); | |
| break; | |
| case IRQ_TYPE_LEVEL_LOW: | |
| __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable); | |
| break; | |
| } | |
| } | |
| static void bcm2835_gpio_irq_enable(struct irq_data *data) | |
| { | |
| struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); | |
| unsigned gpio = irqd_to_hwirq(data); | |
| unsigned offset = GPIO_REG_SHIFT(gpio); | |
| unsigned bank = GPIO_REG_OFFSET(gpio); | |
| unsigned long flags; | |
| spin_lock_irqsave(&pc->irq_lock[bank], flags); | |
| set_bit(offset, &pc->enabled_irq_map[bank]); | |
| bcm2835_gpio_irq_config(pc, gpio, true); | |
| spin_unlock_irqrestore(&pc->irq_lock[bank], flags); | |
| } | |
| static void bcm2835_gpio_irq_disable(struct irq_data *data) | |
| { | |
| struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); | |
| unsigned gpio = irqd_to_hwirq(data); | |
| unsigned offset = GPIO_REG_SHIFT(gpio); | |
| unsigned bank = GPIO_REG_OFFSET(gpio); | |
| unsigned long flags; | |
| spin_lock_irqsave(&pc->irq_lock[bank], flags); | |
| bcm2835_gpio_irq_config(pc, gpio, false); | |
| clear_bit(offset, &pc->enabled_irq_map[bank]); | |
| spin_unlock_irqrestore(&pc->irq_lock[bank], flags); | |
| } | |
| static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc, | |
| unsigned offset, unsigned int type) | |
| { | |
| switch (type) { | |
| case IRQ_TYPE_NONE: | |
| case IRQ_TYPE_EDGE_RISING: | |
| case IRQ_TYPE_EDGE_FALLING: | |
| case IRQ_TYPE_EDGE_BOTH: | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| case IRQ_TYPE_LEVEL_LOW: | |
| pc->irq_type[offset] = type; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* slower path for reconfiguring IRQ type */ | |
| static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc, | |
| unsigned offset, unsigned int type) | |
| { | |
| switch (type) { | |
| case IRQ_TYPE_NONE: | |
| if (pc->irq_type[offset] != type) { | |
| bcm2835_gpio_irq_config(pc, offset, false); | |
| pc->irq_type[offset] = type; | |
| } | |
| break; | |
| case IRQ_TYPE_EDGE_RISING: | |
| if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) { | |
| /* RISING already enabled, disable FALLING */ | |
| pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING; | |
| bcm2835_gpio_irq_config(pc, offset, false); | |
| pc->irq_type[offset] = type; | |
| } else if (pc->irq_type[offset] != type) { | |
| bcm2835_gpio_irq_config(pc, offset, false); | |
| pc->irq_type[offset] = type; | |
| bcm2835_gpio_irq_config(pc, offset, true); | |
| } | |
| break; | |
| case IRQ_TYPE_EDGE_FALLING: | |
| if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) { | |
| /* FALLING already enabled, disable RISING */ | |
| pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING; | |
| bcm2835_gpio_irq_config(pc, offset, false); | |
| pc->irq_type[offset] = type; | |
| } else if (pc->irq_type[offset] != type) { | |
| bcm2835_gpio_irq_config(pc, offset, false); | |
| pc->irq_type[offset] = type; | |
| bcm2835_gpio_irq_config(pc, offset, true); | |
| } | |
| break; | |
| case IRQ_TYPE_EDGE_BOTH: | |
| if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) { | |
| /* RISING already enabled, enable FALLING too */ | |
| pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING; | |
| bcm2835_gpio_irq_config(pc, offset, true); | |
| pc->irq_type[offset] = type; | |
| } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) { | |
| /* FALLING already enabled, enable RISING too */ | |
| pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING; | |
| bcm2835_gpio_irq_config(pc, offset, true); | |
| pc->irq_type[offset] = type; | |
| } else if (pc->irq_type[offset] != type) { | |
| bcm2835_gpio_irq_config(pc, offset, false); | |
| pc->irq_type[offset] = type; | |
| bcm2835_gpio_irq_config(pc, offset, true); | |
| } | |
| break; | |
| case IRQ_TYPE_LEVEL_HIGH: | |
| case IRQ_TYPE_LEVEL_LOW: | |
| if (pc->irq_type[offset] != type) { | |
| bcm2835_gpio_irq_config(pc, offset, false); | |
| pc->irq_type[offset] = type; | |
| bcm2835_gpio_irq_config(pc, offset, true); | |
| } | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type) | |
| { | |
| struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data); | |
| unsigned gpio = irqd_to_hwirq(data); | |
| unsigned offset = GPIO_REG_SHIFT(gpio); | |
| unsigned bank = GPIO_REG_OFFSET(gpio); | |
| unsigned long flags; | |
| int ret; | |
| spin_lock_irqsave(&pc->irq_lock[bank], flags); | |
| if (test_bit(offset, &pc->enabled_irq_map[bank])) | |
| ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type); | |
| else | |
| ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type); | |
| spin_unlock_irqrestore(&pc->irq_lock[bank], flags); | |
| return ret; | |
| } | |
| static struct irq_chip bcm2835_gpio_irq_chip = { | |
| .name = MODULE_NAME, | |
| .irq_enable = bcm2835_gpio_irq_enable, | |
| .irq_disable = bcm2835_gpio_irq_disable, | |
| .irq_set_type = bcm2835_gpio_irq_set_type, | |
| }; | |
| static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev) | |
| { | |
| return ARRAY_SIZE(bcm2835_gpio_groups); | |
| } | |
| static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev, | |
| unsigned selector) | |
| { | |
| return bcm2835_gpio_groups[selector]; | |
| } | |
| static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev, | |
| unsigned selector, | |
| const unsigned **pins, | |
| unsigned *num_pins) | |
| { | |
| *pins = &bcm2835_gpio_pins[selector].number; | |
| *num_pins = 1; | |
| return 0; | |
| } | |
| static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev, | |
| struct seq_file *s, | |
| unsigned offset) | |
| { | |
| struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); | |
| enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset); | |
| const char *fname = bcm2835_functions[fsel]; | |
| int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset); | |
| int irq = irq_find_mapping(pc->irq_domain, offset); | |
| seq_printf(s, "function %s in %s; irq %d (%s)", | |
| fname, value ? "hi" : "lo", | |
| irq, irq_type_names[pc->irq_type[offset]]); | |
| } | |
| static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev, | |
| struct pinctrl_map *maps, unsigned num_maps) | |
| { | |
| int i; | |
| for (i = 0; i < num_maps; i++) | |
| if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN) | |
| kfree(maps[i].data.configs.configs); | |
| kfree(maps); | |
| } | |
| static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc, | |
| struct device_node *np, u32 pin, u32 fnum, | |
| struct pinctrl_map **maps) | |
| { | |
| struct pinctrl_map *map = *maps; | |
| if (fnum >= ARRAY_SIZE(bcm2835_functions)) { | |
| dev_err(pc->dev, "%s: invalid brcm,function %d\n", | |
| of_node_full_name(np), fnum); | |
| return -EINVAL; | |
| } | |
| map->type = PIN_MAP_TYPE_MUX_GROUP; | |
| map->data.mux.group = bcm2835_gpio_groups[pin]; | |
| map->data.mux.function = bcm2835_functions[fnum]; | |
| (*maps)++; | |
| return 0; | |
| } | |
| static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc, | |
| struct device_node *np, u32 pin, u32 pull, | |
| struct pinctrl_map **maps) | |
| { | |
| struct pinctrl_map *map = *maps; | |
| unsigned long *configs; | |
| if (pull > 2) { | |
| dev_err(pc->dev, "%s: invalid brcm,pull %d\n", | |
| of_node_full_name(np), pull); | |
| return -EINVAL; | |
| } | |
| configs = kzalloc(sizeof(*configs), GFP_KERNEL); | |
| if (!configs) | |
| return -ENOMEM; | |
| configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull); | |
| map->type = PIN_MAP_TYPE_CONFIGS_PIN; | |
| map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name; | |
| map->data.configs.configs = configs; | |
| map->data.configs.num_configs = 1; | |
| (*maps)++; | |
| return 0; | |
| } | |
| static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, | |
| struct device_node *np, | |
| struct pinctrl_map **map, unsigned *num_maps) | |
| { | |
| struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); | |
| struct property *pins, *funcs, *pulls; | |
| int num_pins, num_funcs, num_pulls, maps_per_pin; | |
| struct pinctrl_map *maps, *cur_map; | |
| int i, err; | |
| u32 pin, func, pull; | |
| pins = of_find_property(np, "brcm,pins", NULL); | |
| if (!pins) { | |
| dev_err(pc->dev, "%s: missing brcm,pins property\n", | |
| of_node_full_name(np)); | |
| return -EINVAL; | |
| } | |
| funcs = of_find_property(np, "brcm,function", NULL); | |
| pulls = of_find_property(np, "brcm,pull", NULL); | |
| if (!funcs && !pulls) { | |
| dev_err(pc->dev, | |
| "%s: neither brcm,function nor brcm,pull specified\n", | |
| of_node_full_name(np)); | |
| return -EINVAL; | |
| } | |
| num_pins = pins->length / 4; | |
| num_funcs = funcs ? (funcs->length / 4) : 0; | |
| num_pulls = pulls ? (pulls->length / 4) : 0; | |
| if (num_funcs > 1 && num_funcs != num_pins) { | |
| dev_err(pc->dev, | |
| "%s: brcm,function must have 1 or %d entries\n", | |
| of_node_full_name(np), num_pins); | |
| return -EINVAL; | |
| } | |
| if (num_pulls > 1 && num_pulls != num_pins) { | |
| dev_err(pc->dev, | |
| "%s: brcm,pull must have 1 or %d entries\n", | |
| of_node_full_name(np), num_pins); | |
| return -EINVAL; | |
| } | |
| maps_per_pin = 0; | |
| if (num_funcs) | |
| maps_per_pin++; | |
| if (num_pulls) | |
| maps_per_pin++; | |
| cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps), | |
| GFP_KERNEL); | |
| if (!maps) | |
| return -ENOMEM; | |
| for (i = 0; i < num_pins; i++) { | |
| err = of_property_read_u32_index(np, "brcm,pins", i, &pin); | |
| if (err) | |
| goto out; | |
| if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) { | |
| dev_err(pc->dev, "%s: invalid brcm,pins value %d\n", | |
| of_node_full_name(np), pin); | |
| err = -EINVAL; | |
| goto out; | |
| } | |
| if (num_funcs) { | |
| err = of_property_read_u32_index(np, "brcm,function", | |
| (num_funcs > 1) ? i : 0, &func); | |
| if (err) | |
| goto out; | |
| err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin, | |
| func, &cur_map); | |
| if (err) | |
| goto out; | |
| } | |
| if (num_pulls) { | |
| err = of_property_read_u32_index(np, "brcm,pull", | |
| (num_funcs > 1) ? i : 0, &pull); | |
| if (err) | |
| goto out; | |
| err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin, | |
| pull, &cur_map); | |
| if (err) | |
| goto out; | |
| } | |
| } | |
| *map = maps; | |
| *num_maps = num_pins * maps_per_pin; | |
| return 0; | |
| out: | |
| kfree(maps); | |
| return err; | |
| } | |
| static const struct pinctrl_ops bcm2835_pctl_ops = { | |
| .get_groups_count = bcm2835_pctl_get_groups_count, | |
| .get_group_name = bcm2835_pctl_get_group_name, | |
| .get_group_pins = bcm2835_pctl_get_group_pins, | |
| .pin_dbg_show = bcm2835_pctl_pin_dbg_show, | |
| .dt_node_to_map = bcm2835_pctl_dt_node_to_map, | |
| .dt_free_map = bcm2835_pctl_dt_free_map, | |
| }; | |
| static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev) | |
| { | |
| return BCM2835_FSEL_COUNT; | |
| } | |
| static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev, | |
| unsigned selector) | |
| { | |
| return bcm2835_functions[selector]; | |
| } | |
| static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev, | |
| unsigned selector, | |
| const char * const **groups, | |
| unsigned * const num_groups) | |
| { | |
| /* every pin can do every function */ | |
| *groups = bcm2835_gpio_groups; | |
| *num_groups = ARRAY_SIZE(bcm2835_gpio_groups); | |
| return 0; | |
| } | |
| static int bcm2835_pmx_enable(struct pinctrl_dev *pctldev, | |
| unsigned func_selector, | |
| unsigned group_selector) | |
| { | |
| struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); | |
| bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector); | |
| return 0; | |
| } | |
| static void bcm2835_pmx_disable(struct pinctrl_dev *pctldev, | |
| unsigned func_selector, | |
| unsigned group_selector) | |
| { | |
| struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); | |
| /* disable by setting to GPIO_IN */ | |
| bcm2835_pinctrl_fsel_set(pc, group_selector, BCM2835_FSEL_GPIO_IN); | |
| } | |
| static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev, | |
| struct pinctrl_gpio_range *range, | |
| unsigned offset) | |
| { | |
| struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); | |
| /* disable by setting to GPIO_IN */ | |
| bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN); | |
| } | |
| static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, | |
| struct pinctrl_gpio_range *range, | |
| unsigned offset, | |
| bool input) | |
| { | |
| struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); | |
| enum bcm2835_fsel fsel = input ? | |
| BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT; | |
| bcm2835_pinctrl_fsel_set(pc, offset, fsel); | |
| return 0; | |
| } | |
| static const struct pinmux_ops bcm2835_pmx_ops = { | |
| .get_functions_count = bcm2835_pmx_get_functions_count, | |
| .get_function_name = bcm2835_pmx_get_function_name, | |
| .get_function_groups = bcm2835_pmx_get_function_groups, | |
| .enable = bcm2835_pmx_enable, | |
| .disable = bcm2835_pmx_disable, | |
| .gpio_disable_free = bcm2835_pmx_gpio_disable_free, | |
| .gpio_set_direction = bcm2835_pmx_gpio_set_direction, | |
| }; | |
| static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev, | |
| unsigned pin, unsigned long *config) | |
| { | |
| /* No way to read back config in HW */ | |
| return -ENOTSUPP; | |
| } | |
| static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev, | |
| unsigned pin, unsigned long *configs, | |
| unsigned num_configs) | |
| { | |
| struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); | |
| enum bcm2835_pinconf_param param; | |
| u16 arg; | |
| u32 off, bit; | |
| int i; | |
| for (i = 0; i < num_configs; i++) { | |
| param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]); | |
| arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]); | |
| if (param != BCM2835_PINCONF_PARAM_PULL) | |
| return -EINVAL; | |
| off = GPIO_REG_OFFSET(pin); | |
| bit = GPIO_REG_SHIFT(pin); | |
| bcm2835_gpio_wr(pc, GPPUD, arg & 3); | |
| /* | |
| * Docs say to wait 150 cycles, but not of what. We assume a | |
| * 1 MHz clock here, which is pretty slow... | |
| */ | |
| udelay(150); | |
| bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); | |
| udelay(150); | |
| bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); | |
| } /* for each config */ | |
| return 0; | |
| } | |
| static const struct pinconf_ops bcm2835_pinconf_ops = { | |
| .pin_config_get = bcm2835_pinconf_get, | |
| .pin_config_set = bcm2835_pinconf_set, | |
| }; | |
| static struct pinctrl_desc bcm2835_pinctrl_desc = { | |
| .name = MODULE_NAME, | |
| .pins = bcm2835_gpio_pins, | |
| .npins = ARRAY_SIZE(bcm2835_gpio_pins), | |
| .pctlops = &bcm2835_pctl_ops, | |
| .pmxops = &bcm2835_pmx_ops, | |
| .confops = &bcm2835_pinconf_ops, | |
| .owner = THIS_MODULE, | |
| }; | |
| static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = { | |
| .name = MODULE_NAME, | |
| .npins = BCM2835_NUM_GPIOS, | |
| }; | |
| static int bcm2835_pinctrl_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *np = dev->of_node; | |
| struct bcm2835_pinctrl *pc; | |
| struct resource iomem; | |
| int err, i; | |
| BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS); | |
| BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS); | |
| pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); | |
| if (!pc) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, pc); | |
| pc->dev = dev; | |
| err = of_address_to_resource(np, 0, &iomem); | |
| if (err) { | |
| dev_err(dev, "could not get IO memory\n"); | |
| return err; | |
| } | |
| pc->base = devm_ioremap_resource(dev, &iomem); | |
| if (IS_ERR(pc->base)) | |
| return PTR_ERR(pc->base); | |
| pc->gpio_chip = bcm2835_gpio_chip; | |
| pc->gpio_chip.dev = dev; | |
| pc->gpio_chip.of_node = np; | |
| pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS, | |
| &irq_domain_simple_ops, NULL); | |
| if (!pc->irq_domain) { | |
| dev_err(dev, "could not create IRQ domain\n"); | |
| return -ENOMEM; | |
| } | |
| for (i = 0; i < BCM2835_NUM_GPIOS; i++) { | |
| int irq = irq_create_mapping(pc->irq_domain, i); | |
| irq_set_lockdep_class(irq, &gpio_lock_class); | |
| irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip, | |
| handle_simple_irq); | |
| irq_set_chip_data(irq, pc); | |
| set_irq_flags(irq, IRQF_VALID); | |
| } | |
| for (i = 0; i < BCM2835_NUM_BANKS; i++) { | |
| unsigned long events; | |
| unsigned offset; | |
| int len; | |
| char *name; | |
| /* clear event detection flags */ | |
| bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0); | |
| bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0); | |
| bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0); | |
| bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0); | |
| bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0); | |
| bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0); | |
| /* clear all the events */ | |
| events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4); | |
| for_each_set_bit(offset, &events, 32) | |
| bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset)); | |
| pc->irq[i] = irq_of_parse_and_map(np, i); | |
| pc->irq_data[i].pc = pc; | |
| pc->irq_data[i].bank = i; | |
| spin_lock_init(&pc->irq_lock[i]); | |
| len = strlen(dev_name(pc->dev)) + 16; | |
| name = devm_kzalloc(pc->dev, len, GFP_KERNEL); | |
| if (!name) | |
| return -ENOMEM; | |
| snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i); | |
| err = devm_request_irq(dev, pc->irq[i], | |
| bcm2835_gpio_irq_handler, IRQF_SHARED, | |
| name, &pc->irq_data[i]); | |
| if (err) { | |
| dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]); | |
| return err; | |
| } | |
| } | |
| err = gpiochip_add(&pc->gpio_chip); | |
| if (err) { | |
| dev_err(dev, "could not add GPIO chip\n"); | |
| return err; | |
| } | |
| pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc); | |
| if (!pc->pctl_dev) { | |
| gpiochip_remove(&pc->gpio_chip); | |
| return -EINVAL; | |
| } | |
| pc->gpio_range = bcm2835_pinctrl_gpio_range; | |
| pc->gpio_range.base = pc->gpio_chip.base; | |
| pc->gpio_range.gc = &pc->gpio_chip; | |
| pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range); | |
| return 0; | |
| } | |
| static int bcm2835_pinctrl_remove(struct platform_device *pdev) | |
| { | |
| struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev); | |
| pinctrl_unregister(pc->pctl_dev); | |
| gpiochip_remove(&pc->gpio_chip); | |
| return 0; | |
| } | |
| static struct of_device_id bcm2835_pinctrl_match[] = { | |
| { .compatible = "brcm,bcm2835-gpio" }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match); | |
| static struct platform_driver bcm2835_pinctrl_driver = { | |
| .probe = bcm2835_pinctrl_probe, | |
| .remove = bcm2835_pinctrl_remove, | |
| .driver = { | |
| .name = MODULE_NAME, | |
| .owner = THIS_MODULE, | |
| .of_match_table = bcm2835_pinctrl_match, | |
| }, | |
| }; | |
| module_platform_driver(bcm2835_pinctrl_driver); | |
| MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren"); | |
| MODULE_DESCRIPTION("BCM2835 Pin control driver"); | |
| MODULE_LICENSE("GPL"); |