| /* | |
| * Generic GPIO driver for logic cells found in the Nomadik SoC | |
| * | |
| * Copyright (C) 2008,2009 STMicroelectronics | |
| * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> | |
| * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> | |
| * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/io.h> | |
| #include <linux/clk.h> | |
| #include <linux/err.h> | |
| #include <linux/gpio.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/irqchip/chained_irq.h> | |
| #include <linux/slab.h> | |
| #include <linux/of_device.h> | |
| #include <linux/of_address.h> | |
| #include <linux/pinctrl/machine.h> | |
| #include <linux/pinctrl/pinctrl.h> | |
| #include <linux/pinctrl/pinmux.h> | |
| #include <linux/pinctrl/pinconf.h> | |
| /* Since we request GPIOs from ourself */ | |
| #include <linux/pinctrl/consumer.h> | |
| #include <linux/platform_data/pinctrl-nomadik.h> | |
| #include "pinctrl-nomadik.h" | |
| #include "core.h" | |
| /* | |
| * The GPIO module in the Nomadik family of Systems-on-Chip is an | |
| * AMBA device, managing 32 pins and alternate functions. The logic block | |
| * is currently used in the Nomadik and ux500. | |
| * | |
| * Symbols in this file are called "nmk_gpio" for "nomadik gpio" | |
| */ | |
| struct nmk_gpio_chip { | |
| struct gpio_chip chip; | |
| struct irq_domain *domain; | |
| void __iomem *addr; | |
| struct clk *clk; | |
| unsigned int bank; | |
| unsigned int parent_irq; | |
| int secondary_parent_irq; | |
| u32 (*get_secondary_status)(unsigned int bank); | |
| void (*set_ioforce)(bool enable); | |
| spinlock_t lock; | |
| bool sleepmode; | |
| /* Keep track of configured edges */ | |
| u32 edge_rising; | |
| u32 edge_falling; | |
| u32 real_wake; | |
| u32 rwimsc; | |
| u32 fwimsc; | |
| u32 rimsc; | |
| u32 fimsc; | |
| u32 pull_up; | |
| u32 lowemi; | |
| }; | |
| /** | |
| * struct nmk_pinctrl - state container for the Nomadik pin controller | |
| * @dev: containing device pointer | |
| * @pctl: corresponding pin controller device | |
| * @soc: SoC data for this specific chip | |
| * @prcm_base: PRCM register range virtual base | |
| */ | |
| struct nmk_pinctrl { | |
| struct device *dev; | |
| struct pinctrl_dev *pctl; | |
| const struct nmk_pinctrl_soc_data *soc; | |
| void __iomem *prcm_base; | |
| }; | |
| static struct nmk_gpio_chip * | |
| nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)]; | |
| static DEFINE_SPINLOCK(nmk_gpio_slpm_lock); | |
| #define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips) | |
| static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, | |
| unsigned offset, int gpio_mode) | |
| { | |
| u32 bit = 1 << offset; | |
| u32 afunc, bfunc; | |
| afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; | |
| bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; | |
| if (gpio_mode & NMK_GPIO_ALT_A) | |
| afunc |= bit; | |
| if (gpio_mode & NMK_GPIO_ALT_B) | |
| bfunc |= bit; | |
| writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); | |
| writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); | |
| } | |
| static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, | |
| unsigned offset, enum nmk_gpio_slpm mode) | |
| { | |
| u32 bit = 1 << offset; | |
| u32 slpm; | |
| slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC); | |
| if (mode == NMK_GPIO_SLPM_NOCHANGE) | |
| slpm |= bit; | |
| else | |
| slpm &= ~bit; | |
| writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC); | |
| } | |
| static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, | |
| unsigned offset, enum nmk_gpio_pull pull) | |
| { | |
| u32 bit = 1 << offset; | |
| u32 pdis; | |
| pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); | |
| if (pull == NMK_GPIO_PULL_NONE) { | |
| pdis |= bit; | |
| nmk_chip->pull_up &= ~bit; | |
| } else { | |
| pdis &= ~bit; | |
| } | |
| writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); | |
| if (pull == NMK_GPIO_PULL_UP) { | |
| nmk_chip->pull_up |= bit; | |
| writel(bit, nmk_chip->addr + NMK_GPIO_DATS); | |
| } else if (pull == NMK_GPIO_PULL_DOWN) { | |
| nmk_chip->pull_up &= ~bit; | |
| writel(bit, nmk_chip->addr + NMK_GPIO_DATC); | |
| } | |
| } | |
| static void __nmk_gpio_set_lowemi(struct nmk_gpio_chip *nmk_chip, | |
| unsigned offset, bool lowemi) | |
| { | |
| u32 bit = BIT(offset); | |
| bool enabled = nmk_chip->lowemi & bit; | |
| if (lowemi == enabled) | |
| return; | |
| if (lowemi) | |
| nmk_chip->lowemi |= bit; | |
| else | |
| nmk_chip->lowemi &= ~bit; | |
| writel_relaxed(nmk_chip->lowemi, | |
| nmk_chip->addr + NMK_GPIO_LOWEMI); | |
| } | |
| static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, | |
| unsigned offset) | |
| { | |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); | |
| } | |
| static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, | |
| unsigned offset, int val) | |
| { | |
| if (val) | |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); | |
| else | |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); | |
| } | |
| static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, | |
| unsigned offset, int val) | |
| { | |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); | |
| __nmk_gpio_set_output(nmk_chip, offset, val); | |
| } | |
| static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip, | |
| unsigned offset, int gpio_mode, | |
| bool glitch) | |
| { | |
| u32 rwimsc = nmk_chip->rwimsc; | |
| u32 fwimsc = nmk_chip->fwimsc; | |
| if (glitch && nmk_chip->set_ioforce) { | |
| u32 bit = BIT(offset); | |
| /* Prevent spurious wakeups */ | |
| writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC); | |
| writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC); | |
| nmk_chip->set_ioforce(true); | |
| } | |
| __nmk_gpio_set_mode(nmk_chip, offset, gpio_mode); | |
| if (glitch && nmk_chip->set_ioforce) { | |
| nmk_chip->set_ioforce(false); | |
| writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC); | |
| writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC); | |
| } | |
| } | |
| static void | |
| nmk_gpio_disable_lazy_irq(struct nmk_gpio_chip *nmk_chip, unsigned offset) | |
| { | |
| u32 falling = nmk_chip->fimsc & BIT(offset); | |
| u32 rising = nmk_chip->rimsc & BIT(offset); | |
| int gpio = nmk_chip->chip.base + offset; | |
| int irq = irq_find_mapping(nmk_chip->domain, offset); | |
| struct irq_data *d = irq_get_irq_data(irq); | |
| if (!rising && !falling) | |
| return; | |
| if (!d || !irqd_irq_disabled(d)) | |
| return; | |
| if (rising) { | |
| nmk_chip->rimsc &= ~BIT(offset); | |
| writel_relaxed(nmk_chip->rimsc, | |
| nmk_chip->addr + NMK_GPIO_RIMSC); | |
| } | |
| if (falling) { | |
| nmk_chip->fimsc &= ~BIT(offset); | |
| writel_relaxed(nmk_chip->fimsc, | |
| nmk_chip->addr + NMK_GPIO_FIMSC); | |
| } | |
| dev_dbg(nmk_chip->chip.dev, "%d: clearing interrupt mask\n", gpio); | |
| } | |
| static void nmk_write_masked(void __iomem *reg, u32 mask, u32 value) | |
| { | |
| u32 val; | |
| val = readl(reg); | |
| val = ((val & ~mask) | (value & mask)); | |
| writel(val, reg); | |
| } | |
| static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct, | |
| unsigned offset, unsigned alt_num) | |
| { | |
| int i; | |
| u16 reg; | |
| u8 bit; | |
| u8 alt_index; | |
| const struct prcm_gpiocr_altcx_pin_desc *pin_desc; | |
| const u16 *gpiocr_regs; | |
| if (!npct->prcm_base) | |
| return; | |
| if (alt_num > PRCM_IDX_GPIOCR_ALTC_MAX) { | |
| dev_err(npct->dev, "PRCM GPIOCR: alternate-C%i is invalid\n", | |
| alt_num); | |
| return; | |
| } | |
| for (i = 0 ; i < npct->soc->npins_altcx ; i++) { | |
| if (npct->soc->altcx_pins[i].pin == offset) | |
| break; | |
| } | |
| if (i == npct->soc->npins_altcx) { | |
| dev_dbg(npct->dev, "PRCM GPIOCR: pin %i is not found\n", | |
| offset); | |
| return; | |
| } | |
| pin_desc = npct->soc->altcx_pins + i; | |
| gpiocr_regs = npct->soc->prcm_gpiocr_registers; | |
| /* | |
| * If alt_num is NULL, just clear current ALTCx selection | |
| * to make sure we come back to a pure ALTC selection | |
| */ | |
| if (!alt_num) { | |
| for (i = 0 ; i < PRCM_IDX_GPIOCR_ALTC_MAX ; i++) { | |
| if (pin_desc->altcx[i].used == true) { | |
| reg = gpiocr_regs[pin_desc->altcx[i].reg_index]; | |
| bit = pin_desc->altcx[i].control_bit; | |
| if (readl(npct->prcm_base + reg) & BIT(bit)) { | |
| nmk_write_masked(npct->prcm_base + reg, BIT(bit), 0); | |
| dev_dbg(npct->dev, | |
| "PRCM GPIOCR: pin %i: alternate-C%i has been disabled\n", | |
| offset, i+1); | |
| } | |
| } | |
| } | |
| return; | |
| } | |
| alt_index = alt_num - 1; | |
| if (pin_desc->altcx[alt_index].used == false) { | |
| dev_warn(npct->dev, | |
| "PRCM GPIOCR: pin %i: alternate-C%i does not exist\n", | |
| offset, alt_num); | |
| return; | |
| } | |
| /* | |
| * Check if any other ALTCx functions are activated on this pin | |
| * and disable it first. | |
| */ | |
| for (i = 0 ; i < PRCM_IDX_GPIOCR_ALTC_MAX ; i++) { | |
| if (i == alt_index) | |
| continue; | |
| if (pin_desc->altcx[i].used == true) { | |
| reg = gpiocr_regs[pin_desc->altcx[i].reg_index]; | |
| bit = pin_desc->altcx[i].control_bit; | |
| if (readl(npct->prcm_base + reg) & BIT(bit)) { | |
| nmk_write_masked(npct->prcm_base + reg, BIT(bit), 0); | |
| dev_dbg(npct->dev, | |
| "PRCM GPIOCR: pin %i: alternate-C%i has been disabled\n", | |
| offset, i+1); | |
| } | |
| } | |
| } | |
| reg = gpiocr_regs[pin_desc->altcx[alt_index].reg_index]; | |
| bit = pin_desc->altcx[alt_index].control_bit; | |
| dev_dbg(npct->dev, "PRCM GPIOCR: pin %i: alternate-C%i has been selected\n", | |
| offset, alt_index+1); | |
| nmk_write_masked(npct->prcm_base + reg, BIT(bit), BIT(bit)); | |
| } | |
| /* | |
| * Safe sequence used to switch IOs between GPIO and Alternate-C mode: | |
| * - Save SLPM registers | |
| * - Set SLPM=0 for the IOs you want to switch and others to 1 | |
| * - Configure the GPIO registers for the IOs that are being switched | |
| * - Set IOFORCE=1 | |
| * - Modify the AFLSA/B registers for the IOs that are being switched | |
| * - Set IOFORCE=0 | |
| * - Restore SLPM registers | |
| * - Any spurious wake up event during switch sequence to be ignored and | |
| * cleared | |
| */ | |
| static void nmk_gpio_glitch_slpm_init(unsigned int *slpm) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_BANKS; i++) { | |
| struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; | |
| unsigned int temp = slpm[i]; | |
| if (!chip) | |
| break; | |
| clk_enable(chip->clk); | |
| slpm[i] = readl(chip->addr + NMK_GPIO_SLPC); | |
| writel(temp, chip->addr + NMK_GPIO_SLPC); | |
| } | |
| } | |
| static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_BANKS; i++) { | |
| struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; | |
| if (!chip) | |
| break; | |
| writel(slpm[i], chip->addr + NMK_GPIO_SLPC); | |
| clk_disable(chip->clk); | |
| } | |
| } | |
| static int __maybe_unused nmk_prcm_gpiocr_get_mode(struct pinctrl_dev *pctldev, int gpio) | |
| { | |
| int i; | |
| u16 reg; | |
| u8 bit; | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| const struct prcm_gpiocr_altcx_pin_desc *pin_desc; | |
| const u16 *gpiocr_regs; | |
| if (!npct->prcm_base) | |
| return NMK_GPIO_ALT_C; | |
| for (i = 0; i < npct->soc->npins_altcx; i++) { | |
| if (npct->soc->altcx_pins[i].pin == gpio) | |
| break; | |
| } | |
| if (i == npct->soc->npins_altcx) | |
| return NMK_GPIO_ALT_C; | |
| pin_desc = npct->soc->altcx_pins + i; | |
| gpiocr_regs = npct->soc->prcm_gpiocr_registers; | |
| for (i = 0; i < PRCM_IDX_GPIOCR_ALTC_MAX; i++) { | |
| if (pin_desc->altcx[i].used == true) { | |
| reg = gpiocr_regs[pin_desc->altcx[i].reg_index]; | |
| bit = pin_desc->altcx[i].control_bit; | |
| if (readl(npct->prcm_base + reg) & BIT(bit)) | |
| return NMK_GPIO_ALT_C+i+1; | |
| } | |
| } | |
| return NMK_GPIO_ALT_C; | |
| } | |
| int nmk_gpio_get_mode(int gpio) | |
| { | |
| struct nmk_gpio_chip *nmk_chip; | |
| u32 afunc, bfunc, bit; | |
| nmk_chip = nmk_gpio_chips[gpio / NMK_GPIO_PER_CHIP]; | |
| if (!nmk_chip) | |
| return -EINVAL; | |
| bit = 1 << (gpio % NMK_GPIO_PER_CHIP); | |
| clk_enable(nmk_chip->clk); | |
| afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit; | |
| bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit; | |
| clk_disable(nmk_chip->clk); | |
| return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0); | |
| } | |
| EXPORT_SYMBOL(nmk_gpio_get_mode); | |
| /* IRQ functions */ | |
| static inline int nmk_gpio_get_bitmask(int gpio) | |
| { | |
| return 1 << (gpio % NMK_GPIO_PER_CHIP); | |
| } | |
| static void nmk_gpio_irq_ack(struct irq_data *d) | |
| { | |
| struct nmk_gpio_chip *nmk_chip; | |
| nmk_chip = irq_data_get_irq_chip_data(d); | |
| if (!nmk_chip) | |
| return; | |
| clk_enable(nmk_chip->clk); | |
| writel(nmk_gpio_get_bitmask(d->hwirq), nmk_chip->addr + NMK_GPIO_IC); | |
| clk_disable(nmk_chip->clk); | |
| } | |
| enum nmk_gpio_irq_type { | |
| NORMAL, | |
| WAKE, | |
| }; | |
| static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, | |
| int gpio, enum nmk_gpio_irq_type which, | |
| bool enable) | |
| { | |
| u32 bitmask = nmk_gpio_get_bitmask(gpio); | |
| u32 *rimscval; | |
| u32 *fimscval; | |
| u32 rimscreg; | |
| u32 fimscreg; | |
| if (which == NORMAL) { | |
| rimscreg = NMK_GPIO_RIMSC; | |
| fimscreg = NMK_GPIO_FIMSC; | |
| rimscval = &nmk_chip->rimsc; | |
| fimscval = &nmk_chip->fimsc; | |
| } else { | |
| rimscreg = NMK_GPIO_RWIMSC; | |
| fimscreg = NMK_GPIO_FWIMSC; | |
| rimscval = &nmk_chip->rwimsc; | |
| fimscval = &nmk_chip->fwimsc; | |
| } | |
| /* we must individually set/clear the two edges */ | |
| if (nmk_chip->edge_rising & bitmask) { | |
| if (enable) | |
| *rimscval |= bitmask; | |
| else | |
| *rimscval &= ~bitmask; | |
| writel(*rimscval, nmk_chip->addr + rimscreg); | |
| } | |
| if (nmk_chip->edge_falling & bitmask) { | |
| if (enable) | |
| *fimscval |= bitmask; | |
| else | |
| *fimscval &= ~bitmask; | |
| writel(*fimscval, nmk_chip->addr + fimscreg); | |
| } | |
| } | |
| static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, | |
| int gpio, bool on) | |
| { | |
| /* | |
| * Ensure WAKEUP_ENABLE is on. No need to disable it if wakeup is | |
| * disabled, since setting SLPM to 1 increases power consumption, and | |
| * wakeup is anyhow controlled by the RIMSC and FIMSC registers. | |
| */ | |
| if (nmk_chip->sleepmode && on) { | |
| __nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP, | |
| NMK_GPIO_SLPM_WAKEUP_ENABLE); | |
| } | |
| __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); | |
| } | |
| static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable) | |
| { | |
| struct nmk_gpio_chip *nmk_chip; | |
| unsigned long flags; | |
| u32 bitmask; | |
| nmk_chip = irq_data_get_irq_chip_data(d); | |
| bitmask = nmk_gpio_get_bitmask(d->hwirq); | |
| if (!nmk_chip) | |
| return -EINVAL; | |
| clk_enable(nmk_chip->clk); | |
| spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); | |
| spin_lock(&nmk_chip->lock); | |
| __nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, enable); | |
| if (!(nmk_chip->real_wake & bitmask)) | |
| __nmk_gpio_set_wake(nmk_chip, d->hwirq, enable); | |
| spin_unlock(&nmk_chip->lock); | |
| spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); | |
| clk_disable(nmk_chip->clk); | |
| return 0; | |
| } | |
| static void nmk_gpio_irq_mask(struct irq_data *d) | |
| { | |
| nmk_gpio_irq_maskunmask(d, false); | |
| } | |
| static void nmk_gpio_irq_unmask(struct irq_data *d) | |
| { | |
| nmk_gpio_irq_maskunmask(d, true); | |
| } | |
| static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) | |
| { | |
| struct nmk_gpio_chip *nmk_chip; | |
| unsigned long flags; | |
| u32 bitmask; | |
| nmk_chip = irq_data_get_irq_chip_data(d); | |
| if (!nmk_chip) | |
| return -EINVAL; | |
| bitmask = nmk_gpio_get_bitmask(d->hwirq); | |
| clk_enable(nmk_chip->clk); | |
| spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); | |
| spin_lock(&nmk_chip->lock); | |
| if (irqd_irq_disabled(d)) | |
| __nmk_gpio_set_wake(nmk_chip, d->hwirq, on); | |
| if (on) | |
| nmk_chip->real_wake |= bitmask; | |
| else | |
| nmk_chip->real_wake &= ~bitmask; | |
| spin_unlock(&nmk_chip->lock); | |
| spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); | |
| clk_disable(nmk_chip->clk); | |
| return 0; | |
| } | |
| static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) | |
| { | |
| bool enabled = !irqd_irq_disabled(d); | |
| bool wake = irqd_is_wakeup_set(d); | |
| struct nmk_gpio_chip *nmk_chip; | |
| unsigned long flags; | |
| u32 bitmask; | |
| nmk_chip = irq_data_get_irq_chip_data(d); | |
| bitmask = nmk_gpio_get_bitmask(d->hwirq); | |
| if (!nmk_chip) | |
| return -EINVAL; | |
| if (type & IRQ_TYPE_LEVEL_HIGH) | |
| return -EINVAL; | |
| if (type & IRQ_TYPE_LEVEL_LOW) | |
| return -EINVAL; | |
| clk_enable(nmk_chip->clk); | |
| spin_lock_irqsave(&nmk_chip->lock, flags); | |
| if (enabled) | |
| __nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, false); | |
| if (enabled || wake) | |
| __nmk_gpio_irq_modify(nmk_chip, d->hwirq, WAKE, false); | |
| nmk_chip->edge_rising &= ~bitmask; | |
| if (type & IRQ_TYPE_EDGE_RISING) | |
| nmk_chip->edge_rising |= bitmask; | |
| nmk_chip->edge_falling &= ~bitmask; | |
| if (type & IRQ_TYPE_EDGE_FALLING) | |
| nmk_chip->edge_falling |= bitmask; | |
| if (enabled) | |
| __nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, true); | |
| if (enabled || wake) | |
| __nmk_gpio_irq_modify(nmk_chip, d->hwirq, WAKE, true); | |
| spin_unlock_irqrestore(&nmk_chip->lock, flags); | |
| clk_disable(nmk_chip->clk); | |
| return 0; | |
| } | |
| static unsigned int nmk_gpio_irq_startup(struct irq_data *d) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d); | |
| clk_enable(nmk_chip->clk); | |
| nmk_gpio_irq_unmask(d); | |
| return 0; | |
| } | |
| static void nmk_gpio_irq_shutdown(struct irq_data *d) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d); | |
| nmk_gpio_irq_mask(d); | |
| clk_disable(nmk_chip->clk); | |
| } | |
| static struct irq_chip nmk_gpio_irq_chip = { | |
| .name = "Nomadik-GPIO", | |
| .irq_ack = nmk_gpio_irq_ack, | |
| .irq_mask = nmk_gpio_irq_mask, | |
| .irq_unmask = nmk_gpio_irq_unmask, | |
| .irq_set_type = nmk_gpio_irq_set_type, | |
| .irq_set_wake = nmk_gpio_irq_set_wake, | |
| .irq_startup = nmk_gpio_irq_startup, | |
| .irq_shutdown = nmk_gpio_irq_shutdown, | |
| .flags = IRQCHIP_MASK_ON_SUSPEND, | |
| }; | |
| static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, | |
| u32 status) | |
| { | |
| struct nmk_gpio_chip *nmk_chip; | |
| struct irq_chip *host_chip = irq_get_chip(irq); | |
| chained_irq_enter(host_chip, desc); | |
| nmk_chip = irq_get_handler_data(irq); | |
| while (status) { | |
| int bit = __ffs(status); | |
| generic_handle_irq(irq_find_mapping(nmk_chip->domain, bit)); | |
| status &= ~BIT(bit); | |
| } | |
| chained_irq_exit(host_chip, desc); | |
| } | |
| static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); | |
| u32 status; | |
| clk_enable(nmk_chip->clk); | |
| status = readl(nmk_chip->addr + NMK_GPIO_IS); | |
| clk_disable(nmk_chip->clk); | |
| __nmk_gpio_irq_handler(irq, desc, status); | |
| } | |
| static void nmk_gpio_secondary_irq_handler(unsigned int irq, | |
| struct irq_desc *desc) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); | |
| u32 status = nmk_chip->get_secondary_status(nmk_chip->bank); | |
| __nmk_gpio_irq_handler(irq, desc, status); | |
| } | |
| static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) | |
| { | |
| irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); | |
| irq_set_handler_data(nmk_chip->parent_irq, nmk_chip); | |
| if (nmk_chip->secondary_parent_irq >= 0) { | |
| irq_set_chained_handler(nmk_chip->secondary_parent_irq, | |
| nmk_gpio_secondary_irq_handler); | |
| irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip); | |
| } | |
| return 0; | |
| } | |
| /* I/O Functions */ | |
| static int nmk_gpio_request(struct gpio_chip *chip, unsigned offset) | |
| { | |
| /* | |
| * Map back to global GPIO space and request muxing, the direction | |
| * parameter does not matter for this controller. | |
| */ | |
| int gpio = chip->base + offset; | |
| return pinctrl_request_gpio(gpio); | |
| } | |
| static void nmk_gpio_free(struct gpio_chip *chip, unsigned offset) | |
| { | |
| int gpio = chip->base + offset; | |
| pinctrl_free_gpio(gpio); | |
| } | |
| static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = | |
| container_of(chip, struct nmk_gpio_chip, chip); | |
| clk_enable(nmk_chip->clk); | |
| writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); | |
| clk_disable(nmk_chip->clk); | |
| return 0; | |
| } | |
| static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = | |
| container_of(chip, struct nmk_gpio_chip, chip); | |
| u32 bit = 1 << offset; | |
| int value; | |
| clk_enable(nmk_chip->clk); | |
| value = (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0; | |
| clk_disable(nmk_chip->clk); | |
| return value; | |
| } | |
| static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, | |
| int val) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = | |
| container_of(chip, struct nmk_gpio_chip, chip); | |
| clk_enable(nmk_chip->clk); | |
| __nmk_gpio_set_output(nmk_chip, offset, val); | |
| clk_disable(nmk_chip->clk); | |
| } | |
| static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, | |
| int val) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = | |
| container_of(chip, struct nmk_gpio_chip, chip); | |
| clk_enable(nmk_chip->clk); | |
| __nmk_gpio_make_output(nmk_chip, offset, val); | |
| clk_disable(nmk_chip->clk); | |
| return 0; | |
| } | |
| static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = | |
| container_of(chip, struct nmk_gpio_chip, chip); | |
| return irq_create_mapping(nmk_chip->domain, offset); | |
| } | |
| #ifdef CONFIG_DEBUG_FS | |
| #include <linux/seq_file.h> | |
| static void nmk_gpio_dbg_show_one(struct seq_file *s, | |
| struct pinctrl_dev *pctldev, struct gpio_chip *chip, | |
| unsigned offset, unsigned gpio) | |
| { | |
| const char *label = gpiochip_is_requested(chip, offset); | |
| struct nmk_gpio_chip *nmk_chip = | |
| container_of(chip, struct nmk_gpio_chip, chip); | |
| int mode; | |
| bool is_out; | |
| bool pull; | |
| u32 bit = 1 << offset; | |
| const char *modes[] = { | |
| [NMK_GPIO_ALT_GPIO] = "gpio", | |
| [NMK_GPIO_ALT_A] = "altA", | |
| [NMK_GPIO_ALT_B] = "altB", | |
| [NMK_GPIO_ALT_C] = "altC", | |
| [NMK_GPIO_ALT_C+1] = "altC1", | |
| [NMK_GPIO_ALT_C+2] = "altC2", | |
| [NMK_GPIO_ALT_C+3] = "altC3", | |
| [NMK_GPIO_ALT_C+4] = "altC4", | |
| }; | |
| clk_enable(nmk_chip->clk); | |
| is_out = !!(readl(nmk_chip->addr + NMK_GPIO_DIR) & bit); | |
| pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit); | |
| mode = nmk_gpio_get_mode(gpio); | |
| if ((mode == NMK_GPIO_ALT_C) && pctldev) | |
| mode = nmk_prcm_gpiocr_get_mode(pctldev, gpio); | |
| seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s", | |
| gpio, label ?: "(none)", | |
| is_out ? "out" : "in ", | |
| chip->get | |
| ? (chip->get(chip, offset) ? "hi" : "lo") | |
| : "? ", | |
| (mode < 0) ? "unknown" : modes[mode], | |
| pull ? "pull" : "none"); | |
| if (label && !is_out) { | |
| int irq = gpio_to_irq(gpio); | |
| struct irq_desc *desc = irq_to_desc(irq); | |
| /* This races with request_irq(), set_irq_type(), | |
| * and set_irq_wake() ... but those are "rare". | |
| */ | |
| if (irq >= 0 && desc->action) { | |
| char *trigger; | |
| u32 bitmask = nmk_gpio_get_bitmask(gpio); | |
| if (nmk_chip->edge_rising & bitmask) | |
| trigger = "edge-rising"; | |
| else if (nmk_chip->edge_falling & bitmask) | |
| trigger = "edge-falling"; | |
| else | |
| trigger = "edge-undefined"; | |
| seq_printf(s, " irq-%d %s%s", | |
| irq, trigger, | |
| irqd_is_wakeup_set(&desc->irq_data) | |
| ? " wakeup" : ""); | |
| } | |
| } | |
| clk_disable(nmk_chip->clk); | |
| } | |
| static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) | |
| { | |
| unsigned i; | |
| unsigned gpio = chip->base; | |
| for (i = 0; i < chip->ngpio; i++, gpio++) { | |
| nmk_gpio_dbg_show_one(s, NULL, chip, i, gpio); | |
| seq_printf(s, "\n"); | |
| } | |
| } | |
| #else | |
| static inline void nmk_gpio_dbg_show_one(struct seq_file *s, | |
| struct pinctrl_dev *pctldev, | |
| struct gpio_chip *chip, | |
| unsigned offset, unsigned gpio) | |
| { | |
| } | |
| #define nmk_gpio_dbg_show NULL | |
| #endif | |
| /* This structure is replicated for each GPIO block allocated at probe time */ | |
| static struct gpio_chip nmk_gpio_template = { | |
| .request = nmk_gpio_request, | |
| .free = nmk_gpio_free, | |
| .direction_input = nmk_gpio_make_input, | |
| .get = nmk_gpio_get_input, | |
| .direction_output = nmk_gpio_make_output, | |
| .set = nmk_gpio_set_output, | |
| .to_irq = nmk_gpio_to_irq, | |
| .dbg_show = nmk_gpio_dbg_show, | |
| .can_sleep = 0, | |
| }; | |
| void nmk_gpio_clocks_enable(void) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_BANKS; i++) { | |
| struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; | |
| if (!chip) | |
| continue; | |
| clk_enable(chip->clk); | |
| } | |
| } | |
| void nmk_gpio_clocks_disable(void) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_BANKS; i++) { | |
| struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; | |
| if (!chip) | |
| continue; | |
| clk_disable(chip->clk); | |
| } | |
| } | |
| /* | |
| * Called from the suspend/resume path to only keep the real wakeup interrupts | |
| * (those that have had set_irq_wake() called on them) as wakeup interrupts, | |
| * and not the rest of the interrupts which we needed to have as wakeups for | |
| * cpuidle. | |
| * | |
| * PM ops are not used since this needs to be done at the end, after all the | |
| * other drivers are done with their suspend callbacks. | |
| */ | |
| void nmk_gpio_wakeups_suspend(void) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_BANKS; i++) { | |
| struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; | |
| if (!chip) | |
| break; | |
| clk_enable(chip->clk); | |
| writel(chip->rwimsc & chip->real_wake, | |
| chip->addr + NMK_GPIO_RWIMSC); | |
| writel(chip->fwimsc & chip->real_wake, | |
| chip->addr + NMK_GPIO_FWIMSC); | |
| clk_disable(chip->clk); | |
| } | |
| } | |
| void nmk_gpio_wakeups_resume(void) | |
| { | |
| int i; | |
| for (i = 0; i < NUM_BANKS; i++) { | |
| struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; | |
| if (!chip) | |
| break; | |
| clk_enable(chip->clk); | |
| writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC); | |
| writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC); | |
| clk_disable(chip->clk); | |
| } | |
| } | |
| /* | |
| * Read the pull up/pull down status. | |
| * A bit set in 'pull_up' means that pull up | |
| * is selected if pull is enabled in PDIS register. | |
| * Note: only pull up/down set via this driver can | |
| * be detected due to HW limitations. | |
| */ | |
| void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up) | |
| { | |
| if (gpio_bank < NUM_BANKS) { | |
| struct nmk_gpio_chip *chip = nmk_gpio_chips[gpio_bank]; | |
| if (!chip) | |
| return; | |
| *pull_up = chip->pull_up; | |
| } | |
| } | |
| static int nmk_gpio_irq_map(struct irq_domain *d, unsigned int irq, | |
| irq_hw_number_t hwirq) | |
| { | |
| struct nmk_gpio_chip *nmk_chip = d->host_data; | |
| if (!nmk_chip) | |
| return -EINVAL; | |
| irq_set_chip_and_handler(irq, &nmk_gpio_irq_chip, handle_edge_irq); | |
| set_irq_flags(irq, IRQF_VALID); | |
| irq_set_chip_data(irq, nmk_chip); | |
| irq_set_irq_type(irq, IRQ_TYPE_EDGE_FALLING); | |
| return 0; | |
| } | |
| static const struct irq_domain_ops nmk_gpio_irq_simple_ops = { | |
| .map = nmk_gpio_irq_map, | |
| .xlate = irq_domain_xlate_twocell, | |
| }; | |
| static int nmk_gpio_probe(struct platform_device *dev) | |
| { | |
| struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; | |
| struct device_node *np = dev->dev.of_node; | |
| struct nmk_gpio_chip *nmk_chip; | |
| struct gpio_chip *chip; | |
| struct resource *res; | |
| struct clk *clk; | |
| int secondary_irq; | |
| void __iomem *base; | |
| int irq_start = 0; | |
| int irq; | |
| int ret; | |
| if (!pdata && !np) { | |
| dev_err(&dev->dev, "No platform data or device tree found\n"); | |
| return -ENODEV; | |
| } | |
| if (np) { | |
| pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) | |
| return -ENOMEM; | |
| if (of_get_property(np, "st,supports-sleepmode", NULL)) | |
| pdata->supports_sleepmode = true; | |
| if (of_property_read_u32(np, "gpio-bank", &dev->id)) { | |
| dev_err(&dev->dev, "gpio-bank property not found\n"); | |
| return -EINVAL; | |
| } | |
| pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP; | |
| pdata->num_gpio = NMK_GPIO_PER_CHIP; | |
| } | |
| irq = platform_get_irq(dev, 0); | |
| if (irq < 0) | |
| return irq; | |
| secondary_irq = platform_get_irq(dev, 1); | |
| if (secondary_irq >= 0 && !pdata->get_secondary_status) | |
| return -EINVAL; | |
| res = platform_get_resource(dev, IORESOURCE_MEM, 0); | |
| base = devm_ioremap_resource(&dev->dev, res); | |
| if (IS_ERR(base)) | |
| return PTR_ERR(base); | |
| clk = devm_clk_get(&dev->dev, NULL); | |
| if (IS_ERR(clk)) | |
| return PTR_ERR(clk); | |
| clk_prepare(clk); | |
| nmk_chip = devm_kzalloc(&dev->dev, sizeof(*nmk_chip), GFP_KERNEL); | |
| if (!nmk_chip) | |
| return -ENOMEM; | |
| /* | |
| * The virt address in nmk_chip->addr is in the nomadik register space, | |
| * so we can simply convert the resource address, without remapping | |
| */ | |
| nmk_chip->bank = dev->id; | |
| nmk_chip->clk = clk; | |
| nmk_chip->addr = base; | |
| nmk_chip->chip = nmk_gpio_template; | |
| nmk_chip->parent_irq = irq; | |
| nmk_chip->secondary_parent_irq = secondary_irq; | |
| nmk_chip->get_secondary_status = pdata->get_secondary_status; | |
| nmk_chip->set_ioforce = pdata->set_ioforce; | |
| nmk_chip->sleepmode = pdata->supports_sleepmode; | |
| spin_lock_init(&nmk_chip->lock); | |
| chip = &nmk_chip->chip; | |
| chip->base = pdata->first_gpio; | |
| chip->ngpio = pdata->num_gpio; | |
| chip->label = pdata->name ?: dev_name(&dev->dev); | |
| chip->dev = &dev->dev; | |
| chip->owner = THIS_MODULE; | |
| clk_enable(nmk_chip->clk); | |
| nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI); | |
| clk_disable(nmk_chip->clk); | |
| #ifdef CONFIG_OF_GPIO | |
| chip->of_node = np; | |
| #endif | |
| ret = gpiochip_add(&nmk_chip->chip); | |
| if (ret) | |
| return ret; | |
| BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips)); | |
| nmk_gpio_chips[nmk_chip->bank] = nmk_chip; | |
| platform_set_drvdata(dev, nmk_chip); | |
| if (!np) | |
| irq_start = pdata->first_irq; | |
| nmk_chip->domain = irq_domain_add_simple(np, | |
| NMK_GPIO_PER_CHIP, irq_start, | |
| &nmk_gpio_irq_simple_ops, nmk_chip); | |
| if (!nmk_chip->domain) { | |
| dev_err(&dev->dev, "failed to create irqdomain\n"); | |
| /* Just do this, no matter if it fails */ | |
| ret = gpiochip_remove(&nmk_chip->chip); | |
| return -ENOSYS; | |
| } | |
| nmk_gpio_init_irq(nmk_chip); | |
| dev_info(&dev->dev, "at address %p\n", nmk_chip->addr); | |
| return 0; | |
| } | |
| static int nmk_get_groups_cnt(struct pinctrl_dev *pctldev) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| return npct->soc->ngroups; | |
| } | |
| static const char *nmk_get_group_name(struct pinctrl_dev *pctldev, | |
| unsigned selector) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| return npct->soc->groups[selector].name; | |
| } | |
| static int nmk_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector, | |
| const unsigned **pins, | |
| unsigned *num_pins) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| *pins = npct->soc->groups[selector].pins; | |
| *num_pins = npct->soc->groups[selector].npins; | |
| return 0; | |
| } | |
| static struct pinctrl_gpio_range * | |
| nmk_match_gpio_range(struct pinctrl_dev *pctldev, unsigned offset) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| int i; | |
| for (i = 0; i < npct->soc->gpio_num_ranges; i++) { | |
| struct pinctrl_gpio_range *range; | |
| range = &npct->soc->gpio_ranges[i]; | |
| if (offset >= range->pin_base && | |
| offset <= (range->pin_base + range->npins - 1)) | |
| return range; | |
| } | |
| return NULL; | |
| } | |
| static void nmk_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, | |
| unsigned offset) | |
| { | |
| struct pinctrl_gpio_range *range; | |
| struct gpio_chip *chip; | |
| range = nmk_match_gpio_range(pctldev, offset); | |
| if (!range || !range->gc) { | |
| seq_printf(s, "invalid pin offset"); | |
| return; | |
| } | |
| chip = range->gc; | |
| nmk_gpio_dbg_show_one(s, pctldev, chip, offset - chip->base, offset); | |
| } | |
| static void nmk_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, | |
| struct pinctrl_map *map, unsigned num_maps) | |
| { | |
| int i; | |
| for (i = 0; i < num_maps; i++) | |
| if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) | |
| kfree(map[i].data.configs.configs); | |
| kfree(map); | |
| } | |
| static int nmk_dt_reserve_map(struct pinctrl_map **map, unsigned *reserved_maps, | |
| unsigned *num_maps, unsigned reserve) | |
| { | |
| unsigned old_num = *reserved_maps; | |
| unsigned new_num = *num_maps + reserve; | |
| struct pinctrl_map *new_map; | |
| if (old_num >= new_num) | |
| return 0; | |
| new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL); | |
| if (!new_map) | |
| return -ENOMEM; | |
| memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map)); | |
| *map = new_map; | |
| *reserved_maps = new_num; | |
| return 0; | |
| } | |
| static int nmk_dt_add_map_mux(struct pinctrl_map **map, unsigned *reserved_maps, | |
| unsigned *num_maps, const char *group, | |
| const char *function) | |
| { | |
| if (*num_maps == *reserved_maps) | |
| return -ENOSPC; | |
| (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; | |
| (*map)[*num_maps].data.mux.group = group; | |
| (*map)[*num_maps].data.mux.function = function; | |
| (*num_maps)++; | |
| return 0; | |
| } | |
| static int nmk_dt_add_map_configs(struct pinctrl_map **map, | |
| unsigned *reserved_maps, | |
| unsigned *num_maps, const char *group, | |
| unsigned long *configs, unsigned num_configs) | |
| { | |
| unsigned long *dup_configs; | |
| if (*num_maps == *reserved_maps) | |
| return -ENOSPC; | |
| dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), | |
| GFP_KERNEL); | |
| if (!dup_configs) | |
| return -ENOMEM; | |
| (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN; | |
| (*map)[*num_maps].data.configs.group_or_pin = group; | |
| (*map)[*num_maps].data.configs.configs = dup_configs; | |
| (*map)[*num_maps].data.configs.num_configs = num_configs; | |
| (*num_maps)++; | |
| return 0; | |
| } | |
| #define NMK_CONFIG_PIN(x, y) { .property = x, .config = y, } | |
| #define NMK_CONFIG_PIN_ARRAY(x, y) { .property = x, .choice = y, \ | |
| .size = ARRAY_SIZE(y), } | |
| static const unsigned long nmk_pin_input_modes[] = { | |
| PIN_INPUT_NOPULL, | |
| PIN_INPUT_PULLUP, | |
| PIN_INPUT_PULLDOWN, | |
| }; | |
| static const unsigned long nmk_pin_output_modes[] = { | |
| PIN_OUTPUT_LOW, | |
| PIN_OUTPUT_HIGH, | |
| PIN_DIR_OUTPUT, | |
| }; | |
| static const unsigned long nmk_pin_sleep_modes[] = { | |
| PIN_SLEEPMODE_DISABLED, | |
| PIN_SLEEPMODE_ENABLED, | |
| }; | |
| static const unsigned long nmk_pin_sleep_input_modes[] = { | |
| PIN_SLPM_INPUT_NOPULL, | |
| PIN_SLPM_INPUT_PULLUP, | |
| PIN_SLPM_INPUT_PULLDOWN, | |
| PIN_SLPM_DIR_INPUT, | |
| }; | |
| static const unsigned long nmk_pin_sleep_output_modes[] = { | |
| PIN_SLPM_OUTPUT_LOW, | |
| PIN_SLPM_OUTPUT_HIGH, | |
| PIN_SLPM_DIR_OUTPUT, | |
| }; | |
| static const unsigned long nmk_pin_sleep_wakeup_modes[] = { | |
| PIN_SLPM_WAKEUP_DISABLE, | |
| PIN_SLPM_WAKEUP_ENABLE, | |
| }; | |
| static const unsigned long nmk_pin_gpio_modes[] = { | |
| PIN_GPIOMODE_DISABLED, | |
| PIN_GPIOMODE_ENABLED, | |
| }; | |
| static const unsigned long nmk_pin_sleep_pdis_modes[] = { | |
| PIN_SLPM_PDIS_DISABLED, | |
| PIN_SLPM_PDIS_ENABLED, | |
| }; | |
| struct nmk_cfg_param { | |
| const char *property; | |
| unsigned long config; | |
| const unsigned long *choice; | |
| int size; | |
| }; | |
| static const struct nmk_cfg_param nmk_cfg_params[] = { | |
| NMK_CONFIG_PIN_ARRAY("ste,input", nmk_pin_input_modes), | |
| NMK_CONFIG_PIN_ARRAY("ste,output", nmk_pin_output_modes), | |
| NMK_CONFIG_PIN_ARRAY("ste,sleep", nmk_pin_sleep_modes), | |
| NMK_CONFIG_PIN_ARRAY("ste,sleep-input", nmk_pin_sleep_input_modes), | |
| NMK_CONFIG_PIN_ARRAY("ste,sleep-output", nmk_pin_sleep_output_modes), | |
| NMK_CONFIG_PIN_ARRAY("ste,sleep-wakeup", nmk_pin_sleep_wakeup_modes), | |
| NMK_CONFIG_PIN_ARRAY("ste,gpio", nmk_pin_gpio_modes), | |
| NMK_CONFIG_PIN_ARRAY("ste,sleep-pull-disable", nmk_pin_sleep_pdis_modes), | |
| }; | |
| static int nmk_dt_pin_config(int index, int val, unsigned long *config) | |
| { | |
| int ret = 0; | |
| if (nmk_cfg_params[index].choice == NULL) | |
| *config = nmk_cfg_params[index].config; | |
| else { | |
| /* test if out of range */ | |
| if (val < nmk_cfg_params[index].size) { | |
| *config = nmk_cfg_params[index].config | | |
| nmk_cfg_params[index].choice[val]; | |
| } | |
| } | |
| return ret; | |
| } | |
| static const char *nmk_find_pin_name(struct pinctrl_dev *pctldev, const char *pin_name) | |
| { | |
| int i, pin_number; | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1) | |
| for (i = 0; i < npct->soc->npins; i++) | |
| if (npct->soc->pins[i].number == pin_number) | |
| return npct->soc->pins[i].name; | |
| return NULL; | |
| } | |
| static bool nmk_pinctrl_dt_get_config(struct device_node *np, | |
| unsigned long *configs) | |
| { | |
| bool has_config = 0; | |
| unsigned long cfg = 0; | |
| int i, val, ret; | |
| for (i = 0; i < ARRAY_SIZE(nmk_cfg_params); i++) { | |
| ret = of_property_read_u32(np, | |
| nmk_cfg_params[i].property, &val); | |
| if (ret != -EINVAL) { | |
| if (nmk_dt_pin_config(i, val, &cfg) == 0) { | |
| *configs |= cfg; | |
| has_config = 1; | |
| } | |
| } | |
| } | |
| return has_config; | |
| } | |
| static int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, | |
| struct device_node *np, | |
| struct pinctrl_map **map, | |
| unsigned *reserved_maps, | |
| unsigned *num_maps) | |
| { | |
| int ret; | |
| const char *function = NULL; | |
| unsigned long configs = 0; | |
| bool has_config = 0; | |
| unsigned reserve = 0; | |
| struct property *prop; | |
| const char *group, *gpio_name; | |
| struct device_node *np_config; | |
| ret = of_property_read_string(np, "ste,function", &function); | |
| if (ret >= 0) | |
| reserve = 1; | |
| has_config = nmk_pinctrl_dt_get_config(np, &configs); | |
| np_config = of_parse_phandle(np, "ste,config", 0); | |
| if (np_config) | |
| has_config |= nmk_pinctrl_dt_get_config(np_config, &configs); | |
| ret = of_property_count_strings(np, "ste,pins"); | |
| if (ret < 0) | |
| goto exit; | |
| if (has_config) | |
| reserve++; | |
| reserve *= ret; | |
| ret = nmk_dt_reserve_map(map, reserved_maps, num_maps, reserve); | |
| if (ret < 0) | |
| goto exit; | |
| of_property_for_each_string(np, "ste,pins", prop, group) { | |
| if (function) { | |
| ret = nmk_dt_add_map_mux(map, reserved_maps, num_maps, | |
| group, function); | |
| if (ret < 0) | |
| goto exit; | |
| } | |
| if (has_config) { | |
| gpio_name = nmk_find_pin_name(pctldev, group); | |
| ret = nmk_dt_add_map_configs(map, reserved_maps, num_maps, | |
| gpio_name, &configs, 1); | |
| if (ret < 0) | |
| goto exit; | |
| } | |
| } | |
| exit: | |
| return ret; | |
| } | |
| static int nmk_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, | |
| struct device_node *np_config, | |
| struct pinctrl_map **map, unsigned *num_maps) | |
| { | |
| unsigned reserved_maps; | |
| struct device_node *np; | |
| int ret; | |
| reserved_maps = 0; | |
| *map = NULL; | |
| *num_maps = 0; | |
| for_each_child_of_node(np_config, np) { | |
| ret = nmk_pinctrl_dt_subnode_to_map(pctldev, np, map, | |
| &reserved_maps, num_maps); | |
| if (ret < 0) { | |
| nmk_pinctrl_dt_free_map(pctldev, *map, *num_maps); | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static const struct pinctrl_ops nmk_pinctrl_ops = { | |
| .get_groups_count = nmk_get_groups_cnt, | |
| .get_group_name = nmk_get_group_name, | |
| .get_group_pins = nmk_get_group_pins, | |
| .pin_dbg_show = nmk_pin_dbg_show, | |
| .dt_node_to_map = nmk_pinctrl_dt_node_to_map, | |
| .dt_free_map = nmk_pinctrl_dt_free_map, | |
| }; | |
| static int nmk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| return npct->soc->nfunctions; | |
| } | |
| static const char *nmk_pmx_get_func_name(struct pinctrl_dev *pctldev, | |
| unsigned function) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| return npct->soc->functions[function].name; | |
| } | |
| static int nmk_pmx_get_func_groups(struct pinctrl_dev *pctldev, | |
| unsigned function, | |
| const char * const **groups, | |
| unsigned * const num_groups) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| *groups = npct->soc->functions[function].groups; | |
| *num_groups = npct->soc->functions[function].ngroups; | |
| return 0; | |
| } | |
| static int nmk_pmx_enable(struct pinctrl_dev *pctldev, unsigned function, | |
| unsigned group) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| const struct nmk_pingroup *g; | |
| static unsigned int slpm[NUM_BANKS]; | |
| unsigned long flags = 0; | |
| bool glitch; | |
| int ret = -EINVAL; | |
| int i; | |
| g = &npct->soc->groups[group]; | |
| if (g->altsetting < 0) | |
| return -EINVAL; | |
| dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins); | |
| /* | |
| * If we're setting altfunc C by setting both AFSLA and AFSLB to 1, | |
| * we may pass through an undesired state. In this case we take | |
| * some extra care. | |
| * | |
| * Safe sequence used to switch IOs between GPIO and Alternate-C mode: | |
| * - Save SLPM registers (since we have a shadow register in the | |
| * nmk_chip we're using that as backup) | |
| * - Set SLPM=0 for the IOs you want to switch and others to 1 | |
| * - Configure the GPIO registers for the IOs that are being switched | |
| * - Set IOFORCE=1 | |
| * - Modify the AFLSA/B registers for the IOs that are being switched | |
| * - Set IOFORCE=0 | |
| * - Restore SLPM registers | |
| * - Any spurious wake up event during switch sequence to be ignored | |
| * and cleared | |
| * | |
| * We REALLY need to save ALL slpm registers, because the external | |
| * IOFORCE will switch *all* ports to their sleepmode setting to as | |
| * to avoid glitches. (Not just one port!) | |
| */ | |
| glitch = ((g->altsetting & NMK_GPIO_ALT_C) == NMK_GPIO_ALT_C); | |
| if (glitch) { | |
| spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); | |
| /* Initially don't put any pins to sleep when switching */ | |
| memset(slpm, 0xff, sizeof(slpm)); | |
| /* | |
| * Then mask the pins that need to be sleeping now when we're | |
| * switching to the ALT C function. | |
| */ | |
| for (i = 0; i < g->npins; i++) | |
| slpm[g->pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(g->pins[i]); | |
| nmk_gpio_glitch_slpm_init(slpm); | |
| } | |
| for (i = 0; i < g->npins; i++) { | |
| struct pinctrl_gpio_range *range; | |
| struct nmk_gpio_chip *nmk_chip; | |
| struct gpio_chip *chip; | |
| unsigned bit; | |
| range = nmk_match_gpio_range(pctldev, g->pins[i]); | |
| if (!range) { | |
| dev_err(npct->dev, | |
| "invalid pin offset %d in group %s at index %d\n", | |
| g->pins[i], g->name, i); | |
| goto out_glitch; | |
| } | |
| if (!range->gc) { | |
| dev_err(npct->dev, "GPIO chip missing in range for pin offset %d in group %s at index %d\n", | |
| g->pins[i], g->name, i); | |
| goto out_glitch; | |
| } | |
| chip = range->gc; | |
| nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); | |
| dev_dbg(npct->dev, "setting pin %d to altsetting %d\n", g->pins[i], g->altsetting); | |
| clk_enable(nmk_chip->clk); | |
| bit = g->pins[i] % NMK_GPIO_PER_CHIP; | |
| /* | |
| * If the pin is switching to altfunc, and there was an | |
| * interrupt installed on it which has been lazy disabled, | |
| * actually mask the interrupt to prevent spurious interrupts | |
| * that would occur while the pin is under control of the | |
| * peripheral. Only SKE does this. | |
| */ | |
| nmk_gpio_disable_lazy_irq(nmk_chip, bit); | |
| __nmk_gpio_set_mode_safe(nmk_chip, bit, | |
| (g->altsetting & NMK_GPIO_ALT_C), glitch); | |
| clk_disable(nmk_chip->clk); | |
| /* | |
| * Call PRCM GPIOCR config function in case ALTC | |
| * has been selected: | |
| * - If selection is a ALTCx, some bits in PRCM GPIOCR registers | |
| * must be set. | |
| * - If selection is pure ALTC and previous selection was ALTCx, | |
| * then some bits in PRCM GPIOCR registers must be cleared. | |
| */ | |
| if ((g->altsetting & NMK_GPIO_ALT_C) == NMK_GPIO_ALT_C) | |
| nmk_prcm_altcx_set_mode(npct, g->pins[i], | |
| g->altsetting >> NMK_GPIO_ALT_CX_SHIFT); | |
| } | |
| /* When all pins are successfully reconfigured we get here */ | |
| ret = 0; | |
| out_glitch: | |
| if (glitch) { | |
| nmk_gpio_glitch_slpm_restore(slpm); | |
| spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); | |
| } | |
| return ret; | |
| } | |
| static void nmk_pmx_disable(struct pinctrl_dev *pctldev, | |
| unsigned function, unsigned group) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| const struct nmk_pingroup *g; | |
| g = &npct->soc->groups[group]; | |
| if (g->altsetting < 0) | |
| return; | |
| /* Poke out the mux, set the pin to some default state? */ | |
| dev_dbg(npct->dev, "disable group %s, %u pins\n", g->name, g->npins); | |
| } | |
| static int nmk_gpio_request_enable(struct pinctrl_dev *pctldev, | |
| struct pinctrl_gpio_range *range, | |
| unsigned offset) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| struct nmk_gpio_chip *nmk_chip; | |
| struct gpio_chip *chip; | |
| unsigned bit; | |
| if (!range) { | |
| dev_err(npct->dev, "invalid range\n"); | |
| return -EINVAL; | |
| } | |
| if (!range->gc) { | |
| dev_err(npct->dev, "missing GPIO chip in range\n"); | |
| return -EINVAL; | |
| } | |
| chip = range->gc; | |
| nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); | |
| dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset); | |
| clk_enable(nmk_chip->clk); | |
| bit = offset % NMK_GPIO_PER_CHIP; | |
| /* There is no glitch when converting any pin to GPIO */ | |
| __nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO); | |
| clk_disable(nmk_chip->clk); | |
| return 0; | |
| } | |
| static void nmk_gpio_disable_free(struct pinctrl_dev *pctldev, | |
| struct pinctrl_gpio_range *range, | |
| unsigned offset) | |
| { | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset); | |
| /* Set the pin to some default state, GPIO is usually default */ | |
| } | |
| static const struct pinmux_ops nmk_pinmux_ops = { | |
| .get_functions_count = nmk_pmx_get_funcs_cnt, | |
| .get_function_name = nmk_pmx_get_func_name, | |
| .get_function_groups = nmk_pmx_get_func_groups, | |
| .enable = nmk_pmx_enable, | |
| .disable = nmk_pmx_disable, | |
| .gpio_request_enable = nmk_gpio_request_enable, | |
| .gpio_disable_free = nmk_gpio_disable_free, | |
| }; | |
| static int nmk_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin, | |
| unsigned long *config) | |
| { | |
| /* Not implemented */ | |
| return -EINVAL; | |
| } | |
| static int nmk_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin, | |
| unsigned long *configs, unsigned num_configs) | |
| { | |
| static const char *pullnames[] = { | |
| [NMK_GPIO_PULL_NONE] = "none", | |
| [NMK_GPIO_PULL_UP] = "up", | |
| [NMK_GPIO_PULL_DOWN] = "down", | |
| [3] /* illegal */ = "??" | |
| }; | |
| static const char *slpmnames[] = { | |
| [NMK_GPIO_SLPM_INPUT] = "input/wakeup", | |
| [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", | |
| }; | |
| struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); | |
| struct nmk_gpio_chip *nmk_chip; | |
| struct pinctrl_gpio_range *range; | |
| struct gpio_chip *chip; | |
| unsigned bit; | |
| pin_cfg_t cfg; | |
| int pull, slpm, output, val, i; | |
| bool lowemi, gpiomode, sleep; | |
| range = nmk_match_gpio_range(pctldev, pin); | |
| if (!range) { | |
| dev_err(npct->dev, "invalid pin offset %d\n", pin); | |
| return -EINVAL; | |
| } | |
| if (!range->gc) { | |
| dev_err(npct->dev, "GPIO chip missing in range for pin %d\n", | |
| pin); | |
| return -EINVAL; | |
| } | |
| chip = range->gc; | |
| nmk_chip = container_of(chip, struct nmk_gpio_chip, chip); | |
| for (i = 0; i < num_configs; i++) { | |
| /* | |
| * The pin config contains pin number and altfunction fields, | |
| * here we just ignore that part. It's being handled by the | |
| * framework and pinmux callback respectively. | |
| */ | |
| cfg = (pin_cfg_t) configs[i]; | |
| pull = PIN_PULL(cfg); | |
| slpm = PIN_SLPM(cfg); | |
| output = PIN_DIR(cfg); | |
| val = PIN_VAL(cfg); | |
| lowemi = PIN_LOWEMI(cfg); | |
| gpiomode = PIN_GPIOMODE(cfg); | |
| sleep = PIN_SLEEPMODE(cfg); | |
| if (sleep) { | |
| int slpm_pull = PIN_SLPM_PULL(cfg); | |
| int slpm_output = PIN_SLPM_DIR(cfg); | |
| int slpm_val = PIN_SLPM_VAL(cfg); | |
| /* All pins go into GPIO mode at sleep */ | |
| gpiomode = true; | |
| /* | |
| * The SLPM_* values are normal values + 1 to allow zero | |
| * to mean "same as normal". | |
| */ | |
| if (slpm_pull) | |
| pull = slpm_pull - 1; | |
| if (slpm_output) | |
| output = slpm_output - 1; | |
| if (slpm_val) | |
| val = slpm_val - 1; | |
| dev_dbg(nmk_chip->chip.dev, | |
| "pin %d: sleep pull %s, dir %s, val %s\n", | |
| pin, | |
| slpm_pull ? pullnames[pull] : "same", | |
| slpm_output ? (output ? "output" : "input") | |
| : "same", | |
| slpm_val ? (val ? "high" : "low") : "same"); | |
| } | |
| dev_dbg(nmk_chip->chip.dev, | |
| "pin %d [%#lx]: pull %s, slpm %s (%s%s), lowemi %s\n", | |
| pin, cfg, pullnames[pull], slpmnames[slpm], | |
| output ? "output " : "input", | |
| output ? (val ? "high" : "low") : "", | |
| lowemi ? "on" : "off"); | |
| clk_enable(nmk_chip->clk); | |
| bit = pin % NMK_GPIO_PER_CHIP; | |
| if (gpiomode) | |
| /* No glitch when going to GPIO mode */ | |
| __nmk_gpio_set_mode(nmk_chip, bit, NMK_GPIO_ALT_GPIO); | |
| if (output) | |
| __nmk_gpio_make_output(nmk_chip, bit, val); | |
| else { | |
| __nmk_gpio_make_input(nmk_chip, bit); | |
| __nmk_gpio_set_pull(nmk_chip, bit, pull); | |
| } | |
| /* TODO: isn't this only applicable on output pins? */ | |
| __nmk_gpio_set_lowemi(nmk_chip, bit, lowemi); | |
| __nmk_gpio_set_slpm(nmk_chip, bit, slpm); | |
| clk_disable(nmk_chip->clk); | |
| } /* for each config */ | |
| return 0; | |
| } | |
| static const struct pinconf_ops nmk_pinconf_ops = { | |
| .pin_config_get = nmk_pin_config_get, | |
| .pin_config_set = nmk_pin_config_set, | |
| }; | |
| static struct pinctrl_desc nmk_pinctrl_desc = { | |
| .name = "pinctrl-nomadik", | |
| .pctlops = &nmk_pinctrl_ops, | |
| .pmxops = &nmk_pinmux_ops, | |
| .confops = &nmk_pinconf_ops, | |
| .owner = THIS_MODULE, | |
| }; | |
| static const struct of_device_id nmk_pinctrl_match[] = { | |
| { | |
| .compatible = "stericsson,stn8815-pinctrl", | |
| .data = (void *)PINCTRL_NMK_STN8815, | |
| }, | |
| { | |
| .compatible = "stericsson,db8500-pinctrl", | |
| .data = (void *)PINCTRL_NMK_DB8500, | |
| }, | |
| { | |
| .compatible = "stericsson,db8540-pinctrl", | |
| .data = (void *)PINCTRL_NMK_DB8540, | |
| }, | |
| {}, | |
| }; | |
| static int nmk_pinctrl_suspend(struct platform_device *pdev, pm_message_t state) | |
| { | |
| struct nmk_pinctrl *npct; | |
| npct = platform_get_drvdata(pdev); | |
| if (!npct) | |
| return -EINVAL; | |
| return pinctrl_force_sleep(npct->pctl); | |
| } | |
| static int nmk_pinctrl_resume(struct platform_device *pdev) | |
| { | |
| struct nmk_pinctrl *npct; | |
| npct = platform_get_drvdata(pdev); | |
| if (!npct) | |
| return -EINVAL; | |
| return pinctrl_force_default(npct->pctl); | |
| } | |
| static int nmk_pinctrl_probe(struct platform_device *pdev) | |
| { | |
| const struct platform_device_id *platid = platform_get_device_id(pdev); | |
| struct device_node *np = pdev->dev.of_node; | |
| struct device_node *prcm_np; | |
| struct nmk_pinctrl *npct; | |
| struct resource *res; | |
| unsigned int version = 0; | |
| int i; | |
| npct = devm_kzalloc(&pdev->dev, sizeof(*npct), GFP_KERNEL); | |
| if (!npct) | |
| return -ENOMEM; | |
| if (platid) | |
| version = platid->driver_data; | |
| else if (np) { | |
| const struct of_device_id *match; | |
| match = of_match_device(nmk_pinctrl_match, &pdev->dev); | |
| if (!match) | |
| return -ENODEV; | |
| version = (unsigned int) match->data; | |
| } | |
| /* Poke in other ASIC variants here */ | |
| if (version == PINCTRL_NMK_STN8815) | |
| nmk_pinctrl_stn8815_init(&npct->soc); | |
| if (version == PINCTRL_NMK_DB8500) | |
| nmk_pinctrl_db8500_init(&npct->soc); | |
| if (version == PINCTRL_NMK_DB8540) | |
| nmk_pinctrl_db8540_init(&npct->soc); | |
| if (np) { | |
| prcm_np = of_parse_phandle(np, "prcm", 0); | |
| if (prcm_np) | |
| npct->prcm_base = of_iomap(prcm_np, 0); | |
| } | |
| /* Allow platform passed information to over-write DT. */ | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| if (res) | |
| npct->prcm_base = devm_ioremap(&pdev->dev, res->start, | |
| resource_size(res)); | |
| if (!npct->prcm_base) { | |
| if (version == PINCTRL_NMK_STN8815) { | |
| dev_info(&pdev->dev, | |
| "No PRCM base, " | |
| "assuming no ALT-Cx control is available\n"); | |
| } else { | |
| dev_err(&pdev->dev, "missing PRCM base address\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| /* | |
| * We need all the GPIO drivers to probe FIRST, or we will not be able | |
| * to obtain references to the struct gpio_chip * for them, and we | |
| * need this to proceed. | |
| */ | |
| for (i = 0; i < npct->soc->gpio_num_ranges; i++) { | |
| if (!nmk_gpio_chips[npct->soc->gpio_ranges[i].id]) { | |
| dev_warn(&pdev->dev, "GPIO chip %d not registered yet\n", i); | |
| return -EPROBE_DEFER; | |
| } | |
| npct->soc->gpio_ranges[i].gc = &nmk_gpio_chips[npct->soc->gpio_ranges[i].id]->chip; | |
| } | |
| nmk_pinctrl_desc.pins = npct->soc->pins; | |
| nmk_pinctrl_desc.npins = npct->soc->npins; | |
| npct->dev = &pdev->dev; | |
| npct->pctl = pinctrl_register(&nmk_pinctrl_desc, &pdev->dev, npct); | |
| if (!npct->pctl) { | |
| dev_err(&pdev->dev, "could not register Nomadik pinctrl driver\n"); | |
| return -EINVAL; | |
| } | |
| /* We will handle a range of GPIO pins */ | |
| for (i = 0; i < npct->soc->gpio_num_ranges; i++) | |
| pinctrl_add_gpio_range(npct->pctl, &npct->soc->gpio_ranges[i]); | |
| platform_set_drvdata(pdev, npct); | |
| dev_info(&pdev->dev, "initialized Nomadik pin control driver\n"); | |
| return 0; | |
| } | |
| static const struct of_device_id nmk_gpio_match[] = { | |
| { .compatible = "st,nomadik-gpio", }, | |
| {} | |
| }; | |
| static struct platform_driver nmk_gpio_driver = { | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "gpio", | |
| .of_match_table = nmk_gpio_match, | |
| }, | |
| .probe = nmk_gpio_probe, | |
| }; | |
| static const struct platform_device_id nmk_pinctrl_id[] = { | |
| { "pinctrl-stn8815", PINCTRL_NMK_STN8815 }, | |
| { "pinctrl-db8500", PINCTRL_NMK_DB8500 }, | |
| { "pinctrl-db8540", PINCTRL_NMK_DB8540 }, | |
| { } | |
| }; | |
| static struct platform_driver nmk_pinctrl_driver = { | |
| .driver = { | |
| .owner = THIS_MODULE, | |
| .name = "pinctrl-nomadik", | |
| .of_match_table = nmk_pinctrl_match, | |
| }, | |
| .probe = nmk_pinctrl_probe, | |
| .id_table = nmk_pinctrl_id, | |
| #ifdef CONFIG_PM | |
| .suspend = nmk_pinctrl_suspend, | |
| .resume = nmk_pinctrl_resume, | |
| #endif | |
| }; | |
| static int __init nmk_gpio_init(void) | |
| { | |
| int ret; | |
| ret = platform_driver_register(&nmk_gpio_driver); | |
| if (ret) | |
| return ret; | |
| return platform_driver_register(&nmk_pinctrl_driver); | |
| } | |
| core_initcall(nmk_gpio_init); | |
| MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); | |
| MODULE_DESCRIPTION("Nomadik GPIO Driver"); | |
| MODULE_LICENSE("GPL"); |