| /* | |
| * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's. | |
| * | |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd. | |
| * http://www.samsung.com | |
| * Copyright (c) 2012 Linaro Ltd | |
| * http://www.linaro.org | |
| * | |
| * Author: Thomas Abraham <thomas.ab@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This driver implements the Samsung pinctrl driver. It supports setting up of | |
| * pinmux and pinconf configurations. The gpiolib interface is also included. | |
| * External interrupt (gpio and wakeup) support are not included in this driver | |
| * but provides extensions to which platform specific implementation of the gpio | |
| * and wakeup interrupts can be hooked to. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/io.h> | |
| #include <linux/slab.h> | |
| #include <linux/err.h> | |
| #include <linux/gpio.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/syscore_ops.h> | |
| #include "core.h" | |
| #include "pinctrl-samsung.h" | |
| #define GROUP_SUFFIX "-grp" | |
| #define GSUFFIX_LEN sizeof(GROUP_SUFFIX) | |
| #define FUNCTION_SUFFIX "-mux" | |
| #define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX) | |
| /* list of all possible config options supported */ | |
| static struct pin_config { | |
| char *prop_cfg; | |
| unsigned int cfg_type; | |
| } pcfgs[] = { | |
| { "samsung,pin-pud", PINCFG_TYPE_PUD }, | |
| { "samsung,pin-drv", PINCFG_TYPE_DRV }, | |
| { "samsung,pin-con-pdn", PINCFG_TYPE_CON_PDN }, | |
| { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, | |
| }; | |
| /* Global list of devices (struct samsung_pinctrl_drv_data) */ | |
| static LIST_HEAD(drvdata_list); | |
| static unsigned int pin_base; | |
| static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) | |
| { | |
| return container_of(gc, struct samsung_pin_bank, gpio_chip); | |
| } | |
| /* check if the selector is a valid pin group selector */ | |
| static int samsung_get_group_count(struct pinctrl_dev *pctldev) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| return drvdata->nr_groups; | |
| } | |
| /* return the name of the group selected by the group selector */ | |
| static const char *samsung_get_group_name(struct pinctrl_dev *pctldev, | |
| unsigned selector) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| return drvdata->pin_groups[selector].name; | |
| } | |
| /* return the pin numbers associated with the specified group */ | |
| static int samsung_get_group_pins(struct pinctrl_dev *pctldev, | |
| unsigned selector, const unsigned **pins, unsigned *num_pins) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| *pins = drvdata->pin_groups[selector].pins; | |
| *num_pins = drvdata->pin_groups[selector].num_pins; | |
| return 0; | |
| } | |
| /* create pinctrl_map entries by parsing device tree nodes */ | |
| static int samsung_dt_node_to_map(struct pinctrl_dev *pctldev, | |
| struct device_node *np, struct pinctrl_map **maps, | |
| unsigned *nmaps) | |
| { | |
| struct device *dev = pctldev->dev; | |
| struct pinctrl_map *map; | |
| unsigned long *cfg = NULL; | |
| char *gname, *fname; | |
| int cfg_cnt = 0, map_cnt = 0, idx = 0; | |
| /* count the number of config options specfied in the node */ | |
| for (idx = 0; idx < ARRAY_SIZE(pcfgs); idx++) { | |
| if (of_find_property(np, pcfgs[idx].prop_cfg, NULL)) | |
| cfg_cnt++; | |
| } | |
| /* | |
| * Find out the number of map entries to create. All the config options | |
| * can be accomadated into a single config map entry. | |
| */ | |
| if (cfg_cnt) | |
| map_cnt = 1; | |
| if (of_find_property(np, "samsung,pin-function", NULL)) | |
| map_cnt++; | |
| if (!map_cnt) { | |
| dev_err(dev, "node %s does not have either config or function " | |
| "configurations\n", np->name); | |
| return -EINVAL; | |
| } | |
| /* Allocate memory for pin-map entries */ | |
| map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL); | |
| if (!map) { | |
| dev_err(dev, "could not alloc memory for pin-maps\n"); | |
| return -ENOMEM; | |
| } | |
| *nmaps = 0; | |
| /* | |
| * Allocate memory for pin group name. The pin group name is derived | |
| * from the node name from which these map entries are be created. | |
| */ | |
| gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL); | |
| if (!gname) { | |
| dev_err(dev, "failed to alloc memory for group name\n"); | |
| goto free_map; | |
| } | |
| sprintf(gname, "%s%s", np->name, GROUP_SUFFIX); | |
| /* | |
| * don't have config options? then skip over to creating function | |
| * map entries. | |
| */ | |
| if (!cfg_cnt) | |
| goto skip_cfgs; | |
| /* Allocate memory for config entries */ | |
| cfg = kzalloc(sizeof(*cfg) * cfg_cnt, GFP_KERNEL); | |
| if (!cfg) { | |
| dev_err(dev, "failed to alloc memory for configs\n"); | |
| goto free_gname; | |
| } | |
| /* Prepare a list of config settings */ | |
| for (idx = 0, cfg_cnt = 0; idx < ARRAY_SIZE(pcfgs); idx++) { | |
| u32 value; | |
| if (!of_property_read_u32(np, pcfgs[idx].prop_cfg, &value)) | |
| cfg[cfg_cnt++] = | |
| PINCFG_PACK(pcfgs[idx].cfg_type, value); | |
| } | |
| /* create the config map entry */ | |
| map[*nmaps].data.configs.group_or_pin = gname; | |
| map[*nmaps].data.configs.configs = cfg; | |
| map[*nmaps].data.configs.num_configs = cfg_cnt; | |
| map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP; | |
| *nmaps += 1; | |
| skip_cfgs: | |
| /* create the function map entry */ | |
| if (of_find_property(np, "samsung,pin-function", NULL)) { | |
| fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL); | |
| if (!fname) { | |
| dev_err(dev, "failed to alloc memory for func name\n"); | |
| goto free_cfg; | |
| } | |
| sprintf(fname, "%s%s", np->name, FUNCTION_SUFFIX); | |
| map[*nmaps].data.mux.group = gname; | |
| map[*nmaps].data.mux.function = fname; | |
| map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP; | |
| *nmaps += 1; | |
| } | |
| *maps = map; | |
| return 0; | |
| free_cfg: | |
| kfree(cfg); | |
| free_gname: | |
| kfree(gname); | |
| free_map: | |
| kfree(map); | |
| return -ENOMEM; | |
| } | |
| /* free the memory allocated to hold the pin-map table */ | |
| static void samsung_dt_free_map(struct pinctrl_dev *pctldev, | |
| struct pinctrl_map *map, unsigned num_maps) | |
| { | |
| int idx; | |
| for (idx = 0; idx < num_maps; idx++) { | |
| if (map[idx].type == PIN_MAP_TYPE_MUX_GROUP) { | |
| kfree(map[idx].data.mux.function); | |
| if (!idx) | |
| kfree(map[idx].data.mux.group); | |
| } else if (map->type == PIN_MAP_TYPE_CONFIGS_GROUP) { | |
| kfree(map[idx].data.configs.configs); | |
| if (!idx) | |
| kfree(map[idx].data.configs.group_or_pin); | |
| } | |
| }; | |
| kfree(map); | |
| } | |
| /* list of pinctrl callbacks for the pinctrl core */ | |
| static const struct pinctrl_ops samsung_pctrl_ops = { | |
| .get_groups_count = samsung_get_group_count, | |
| .get_group_name = samsung_get_group_name, | |
| .get_group_pins = samsung_get_group_pins, | |
| .dt_node_to_map = samsung_dt_node_to_map, | |
| .dt_free_map = samsung_dt_free_map, | |
| }; | |
| /* check if the selector is a valid pin function selector */ | |
| static int samsung_get_functions_count(struct pinctrl_dev *pctldev) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| return drvdata->nr_functions; | |
| } | |
| /* return the name of the pin function specified */ | |
| static const char *samsung_pinmux_get_fname(struct pinctrl_dev *pctldev, | |
| unsigned selector) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| return drvdata->pmx_functions[selector].name; | |
| } | |
| /* return the groups associated for the specified function selector */ | |
| static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev, | |
| unsigned selector, const char * const **groups, | |
| unsigned * const num_groups) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| *groups = drvdata->pmx_functions[selector].groups; | |
| *num_groups = drvdata->pmx_functions[selector].num_groups; | |
| return 0; | |
| } | |
| /* | |
| * given a pin number that is local to a pin controller, find out the pin bank | |
| * and the register base of the pin bank. | |
| */ | |
| static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata, | |
| unsigned pin, void __iomem **reg, u32 *offset, | |
| struct samsung_pin_bank **bank) | |
| { | |
| struct samsung_pin_bank *b; | |
| b = drvdata->ctrl->pin_banks; | |
| while ((pin >= b->pin_base) && | |
| ((b->pin_base + b->nr_pins - 1) < pin)) | |
| b++; | |
| *reg = drvdata->virt_base + b->pctl_offset; | |
| *offset = pin - b->pin_base; | |
| if (bank) | |
| *bank = b; | |
| } | |
| /* enable or disable a pinmux function */ | |
| static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector, | |
| unsigned group, bool enable) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| const unsigned int *pins; | |
| struct samsung_pin_bank *bank; | |
| void __iomem *reg; | |
| u32 mask, shift, data, pin_offset, cnt; | |
| unsigned long flags; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| pins = drvdata->pin_groups[group].pins; | |
| /* | |
| * for each pin in the pin group selected, program the correspoding pin | |
| * pin function number in the config register. | |
| */ | |
| for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) { | |
| struct samsung_pin_bank_type *type; | |
| pin_to_reg_bank(drvdata, pins[cnt] - drvdata->ctrl->base, | |
| ®, &pin_offset, &bank); | |
| type = bank->type; | |
| mask = (1 << type->fld_width[PINCFG_TYPE_FUNC]) - 1; | |
| shift = pin_offset * type->fld_width[PINCFG_TYPE_FUNC]; | |
| if (shift >= 32) { | |
| /* Some banks have two config registers */ | |
| shift -= 32; | |
| reg += 4; | |
| } | |
| spin_lock_irqsave(&bank->slock, flags); | |
| data = readl(reg + type->reg_offset[PINCFG_TYPE_FUNC]); | |
| data &= ~(mask << shift); | |
| if (enable) | |
| data |= drvdata->pin_groups[group].func << shift; | |
| writel(data, reg + type->reg_offset[PINCFG_TYPE_FUNC]); | |
| spin_unlock_irqrestore(&bank->slock, flags); | |
| } | |
| } | |
| /* enable a specified pinmux by writing to registers */ | |
| static int samsung_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector, | |
| unsigned group) | |
| { | |
| samsung_pinmux_setup(pctldev, selector, group, true); | |
| return 0; | |
| } | |
| /* disable a specified pinmux by writing to registers */ | |
| static void samsung_pinmux_disable(struct pinctrl_dev *pctldev, | |
| unsigned selector, unsigned group) | |
| { | |
| samsung_pinmux_setup(pctldev, selector, group, false); | |
| } | |
| /* | |
| * The calls to gpio_direction_output() and gpio_direction_input() | |
| * leads to this function call (via the pinctrl_gpio_direction_{input|output}() | |
| * function called from the gpiolib interface). | |
| */ | |
| static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, | |
| struct pinctrl_gpio_range *range, unsigned offset, bool input) | |
| { | |
| struct samsung_pin_bank_type *type; | |
| struct samsung_pin_bank *bank; | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| void __iomem *reg; | |
| u32 data, pin_offset, mask, shift; | |
| unsigned long flags; | |
| bank = gc_to_pin_bank(range->gc); | |
| type = bank->type; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| pin_offset = offset - bank->pin_base; | |
| reg = drvdata->virt_base + bank->pctl_offset + | |
| type->reg_offset[PINCFG_TYPE_FUNC]; | |
| mask = (1 << type->fld_width[PINCFG_TYPE_FUNC]) - 1; | |
| shift = pin_offset * type->fld_width[PINCFG_TYPE_FUNC]; | |
| if (shift >= 32) { | |
| /* Some banks have two config registers */ | |
| shift -= 32; | |
| reg += 4; | |
| } | |
| spin_lock_irqsave(&bank->slock, flags); | |
| data = readl(reg); | |
| data &= ~(mask << shift); | |
| if (!input) | |
| data |= FUNC_OUTPUT << shift; | |
| writel(data, reg); | |
| spin_unlock_irqrestore(&bank->slock, flags); | |
| return 0; | |
| } | |
| /* list of pinmux callbacks for the pinmux vertical in pinctrl core */ | |
| static const struct pinmux_ops samsung_pinmux_ops = { | |
| .get_functions_count = samsung_get_functions_count, | |
| .get_function_name = samsung_pinmux_get_fname, | |
| .get_function_groups = samsung_pinmux_get_groups, | |
| .enable = samsung_pinmux_enable, | |
| .disable = samsung_pinmux_disable, | |
| .gpio_set_direction = samsung_pinmux_gpio_set_direction, | |
| }; | |
| /* set or get the pin config settings for a specified pin */ | |
| static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin, | |
| unsigned long *config, bool set) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| struct samsung_pin_bank_type *type; | |
| struct samsung_pin_bank *bank; | |
| void __iomem *reg_base; | |
| enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config); | |
| u32 data, width, pin_offset, mask, shift; | |
| u32 cfg_value, cfg_reg; | |
| unsigned long flags; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| pin_to_reg_bank(drvdata, pin - drvdata->ctrl->base, ®_base, | |
| &pin_offset, &bank); | |
| type = bank->type; | |
| if (cfg_type >= PINCFG_TYPE_NUM || !type->fld_width[cfg_type]) | |
| return -EINVAL; | |
| width = type->fld_width[cfg_type]; | |
| cfg_reg = type->reg_offset[cfg_type]; | |
| spin_lock_irqsave(&bank->slock, flags); | |
| mask = (1 << width) - 1; | |
| shift = pin_offset * width; | |
| data = readl(reg_base + cfg_reg); | |
| if (set) { | |
| cfg_value = PINCFG_UNPACK_VALUE(*config); | |
| data &= ~(mask << shift); | |
| data |= (cfg_value << shift); | |
| writel(data, reg_base + cfg_reg); | |
| } else { | |
| data >>= shift; | |
| data &= mask; | |
| *config = PINCFG_PACK(cfg_type, data); | |
| } | |
| spin_unlock_irqrestore(&bank->slock, flags); | |
| return 0; | |
| } | |
| /* set the pin config settings for a specified pin */ | |
| static int samsung_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, | |
| unsigned long *configs, unsigned num_configs) | |
| { | |
| int i, ret; | |
| for (i = 0; i < num_configs; i++) { | |
| ret = samsung_pinconf_rw(pctldev, pin, &configs[i], true); | |
| if (ret < 0) | |
| return ret; | |
| } /* for each config */ | |
| return 0; | |
| } | |
| /* get the pin config settings for a specified pin */ | |
| static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, | |
| unsigned long *config) | |
| { | |
| return samsung_pinconf_rw(pctldev, pin, config, false); | |
| } | |
| /* set the pin config settings for a specified pin group */ | |
| static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev, | |
| unsigned group, unsigned long *configs, | |
| unsigned num_configs) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| const unsigned int *pins; | |
| unsigned int cnt; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| pins = drvdata->pin_groups[group].pins; | |
| for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) | |
| samsung_pinconf_set(pctldev, pins[cnt], configs, num_configs); | |
| return 0; | |
| } | |
| /* get the pin config settings for a specified pin group */ | |
| static int samsung_pinconf_group_get(struct pinctrl_dev *pctldev, | |
| unsigned int group, unsigned long *config) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| const unsigned int *pins; | |
| drvdata = pinctrl_dev_get_drvdata(pctldev); | |
| pins = drvdata->pin_groups[group].pins; | |
| samsung_pinconf_get(pctldev, pins[0], config); | |
| return 0; | |
| } | |
| /* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */ | |
| static const struct pinconf_ops samsung_pinconf_ops = { | |
| .pin_config_get = samsung_pinconf_get, | |
| .pin_config_set = samsung_pinconf_set, | |
| .pin_config_group_get = samsung_pinconf_group_get, | |
| .pin_config_group_set = samsung_pinconf_group_set, | |
| }; | |
| /* gpiolib gpio_set callback function */ | |
| static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value) | |
| { | |
| struct samsung_pin_bank *bank = gc_to_pin_bank(gc); | |
| struct samsung_pin_bank_type *type = bank->type; | |
| unsigned long flags; | |
| void __iomem *reg; | |
| u32 data; | |
| reg = bank->drvdata->virt_base + bank->pctl_offset; | |
| spin_lock_irqsave(&bank->slock, flags); | |
| data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]); | |
| data &= ~(1 << offset); | |
| if (value) | |
| data |= 1 << offset; | |
| writel(data, reg + type->reg_offset[PINCFG_TYPE_DAT]); | |
| spin_unlock_irqrestore(&bank->slock, flags); | |
| } | |
| /* gpiolib gpio_get callback function */ | |
| static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset) | |
| { | |
| void __iomem *reg; | |
| u32 data; | |
| struct samsung_pin_bank *bank = gc_to_pin_bank(gc); | |
| struct samsung_pin_bank_type *type = bank->type; | |
| reg = bank->drvdata->virt_base + bank->pctl_offset; | |
| data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]); | |
| data >>= offset; | |
| data &= 1; | |
| return data; | |
| } | |
| /* | |
| * gpiolib gpio_direction_input callback function. The setting of the pin | |
| * mux function as 'gpio input' will be handled by the pinctrl susbsystem | |
| * interface. | |
| */ | |
| static int samsung_gpio_direction_input(struct gpio_chip *gc, unsigned offset) | |
| { | |
| return pinctrl_gpio_direction_input(gc->base + offset); | |
| } | |
| /* | |
| * gpiolib gpio_direction_output callback function. The setting of the pin | |
| * mux function as 'gpio output' will be handled by the pinctrl susbsystem | |
| * interface. | |
| */ | |
| static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset, | |
| int value) | |
| { | |
| samsung_gpio_set(gc, offset, value); | |
| return pinctrl_gpio_direction_output(gc->base + offset); | |
| } | |
| /* | |
| * gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin | |
| * and a virtual IRQ, if not already present. | |
| */ | |
| static int samsung_gpio_to_irq(struct gpio_chip *gc, unsigned offset) | |
| { | |
| struct samsung_pin_bank *bank = gc_to_pin_bank(gc); | |
| unsigned int virq; | |
| if (!bank->irq_domain) | |
| return -ENXIO; | |
| virq = irq_create_mapping(bank->irq_domain, offset); | |
| return (virq) ? : -ENXIO; | |
| } | |
| /* | |
| * Parse the pin names listed in the 'samsung,pins' property and convert it | |
| * into a list of gpio numbers are create a pin group from it. | |
| */ | |
| static int samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, | |
| struct device_node *cfg_np, | |
| struct pinctrl_desc *pctl, | |
| unsigned int **pin_list, | |
| unsigned int *npins) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct property *prop; | |
| struct pinctrl_pin_desc const *pdesc = pctl->pins; | |
| unsigned int idx = 0, cnt; | |
| const char *pin_name; | |
| *npins = of_property_count_strings(cfg_np, "samsung,pins"); | |
| if (IS_ERR_VALUE(*npins)) { | |
| dev_err(dev, "invalid pin list in %s node", cfg_np->name); | |
| return -EINVAL; | |
| } | |
| *pin_list = devm_kzalloc(dev, *npins * sizeof(**pin_list), GFP_KERNEL); | |
| if (!*pin_list) { | |
| dev_err(dev, "failed to allocate memory for pin list\n"); | |
| return -ENOMEM; | |
| } | |
| of_property_for_each_string(cfg_np, "samsung,pins", prop, pin_name) { | |
| for (cnt = 0; cnt < pctl->npins; cnt++) { | |
| if (pdesc[cnt].name) { | |
| if (!strcmp(pin_name, pdesc[cnt].name)) { | |
| (*pin_list)[idx++] = pdesc[cnt].number; | |
| break; | |
| } | |
| } | |
| } | |
| if (cnt == pctl->npins) { | |
| dev_err(dev, "pin %s not valid in %s node\n", | |
| pin_name, cfg_np->name); | |
| devm_kfree(dev, *pin_list); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Parse the information about all the available pin groups and pin functions | |
| * from device node of the pin-controller. A pin group is formed with all | |
| * the pins listed in the "samsung,pins" property. | |
| */ | |
| static int samsung_pinctrl_parse_dt(struct platform_device *pdev, | |
| struct samsung_pinctrl_drv_data *drvdata) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *dev_np = dev->of_node; | |
| struct device_node *cfg_np; | |
| struct samsung_pin_group *groups, *grp; | |
| struct samsung_pmx_func *functions, *func; | |
| unsigned *pin_list; | |
| unsigned int npins, grp_cnt, func_idx = 0; | |
| char *gname, *fname; | |
| int ret; | |
| grp_cnt = of_get_child_count(dev_np); | |
| if (!grp_cnt) | |
| return -EINVAL; | |
| groups = devm_kzalloc(dev, grp_cnt * sizeof(*groups), GFP_KERNEL); | |
| if (!groups) { | |
| dev_err(dev, "failed allocate memory for ping group list\n"); | |
| return -EINVAL; | |
| } | |
| grp = groups; | |
| functions = devm_kzalloc(dev, grp_cnt * sizeof(*functions), GFP_KERNEL); | |
| if (!functions) { | |
| dev_err(dev, "failed to allocate memory for function list\n"); | |
| return -EINVAL; | |
| } | |
| func = functions; | |
| /* | |
| * Iterate over all the child nodes of the pin controller node | |
| * and create pin groups and pin function lists. | |
| */ | |
| for_each_child_of_node(dev_np, cfg_np) { | |
| u32 function; | |
| if (!of_find_property(cfg_np, "samsung,pins", NULL)) | |
| continue; | |
| ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np, | |
| &drvdata->pctl, &pin_list, &npins); | |
| if (ret) | |
| return ret; | |
| /* derive pin group name from the node name */ | |
| gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN, | |
| GFP_KERNEL); | |
| if (!gname) { | |
| dev_err(dev, "failed to alloc memory for group name\n"); | |
| return -ENOMEM; | |
| } | |
| sprintf(gname, "%s%s", cfg_np->name, GROUP_SUFFIX); | |
| grp->name = gname; | |
| grp->pins = pin_list; | |
| grp->num_pins = npins; | |
| of_property_read_u32(cfg_np, "samsung,pin-function", &function); | |
| grp->func = function; | |
| grp++; | |
| if (!of_find_property(cfg_np, "samsung,pin-function", NULL)) | |
| continue; | |
| /* derive function name from the node name */ | |
| fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN, | |
| GFP_KERNEL); | |
| if (!fname) { | |
| dev_err(dev, "failed to alloc memory for func name\n"); | |
| return -ENOMEM; | |
| } | |
| sprintf(fname, "%s%s", cfg_np->name, FUNCTION_SUFFIX); | |
| func->name = fname; | |
| func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL); | |
| if (!func->groups) { | |
| dev_err(dev, "failed to alloc memory for group list " | |
| "in pin function"); | |
| return -ENOMEM; | |
| } | |
| func->groups[0] = gname; | |
| func->num_groups = 1; | |
| func++; | |
| func_idx++; | |
| } | |
| drvdata->pin_groups = groups; | |
| drvdata->nr_groups = grp_cnt; | |
| drvdata->pmx_functions = functions; | |
| drvdata->nr_functions = func_idx; | |
| return 0; | |
| } | |
| /* register the pinctrl interface with the pinctrl subsystem */ | |
| static int samsung_pinctrl_register(struct platform_device *pdev, | |
| struct samsung_pinctrl_drv_data *drvdata) | |
| { | |
| struct pinctrl_desc *ctrldesc = &drvdata->pctl; | |
| struct pinctrl_pin_desc *pindesc, *pdesc; | |
| struct samsung_pin_bank *pin_bank; | |
| char *pin_names; | |
| int pin, bank, ret; | |
| ctrldesc->name = "samsung-pinctrl"; | |
| ctrldesc->owner = THIS_MODULE; | |
| ctrldesc->pctlops = &samsung_pctrl_ops; | |
| ctrldesc->pmxops = &samsung_pinmux_ops; | |
| ctrldesc->confops = &samsung_pinconf_ops; | |
| pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) * | |
| drvdata->ctrl->nr_pins, GFP_KERNEL); | |
| if (!pindesc) { | |
| dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n"); | |
| return -ENOMEM; | |
| } | |
| ctrldesc->pins = pindesc; | |
| ctrldesc->npins = drvdata->ctrl->nr_pins; | |
| /* dynamically populate the pin number and pin name for pindesc */ | |
| for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++) | |
| pdesc->number = pin + drvdata->ctrl->base; | |
| /* | |
| * allocate space for storing the dynamically generated names for all | |
| * the pins which belong to this pin-controller. | |
| */ | |
| pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH * | |
| drvdata->ctrl->nr_pins, GFP_KERNEL); | |
| if (!pin_names) { | |
| dev_err(&pdev->dev, "mem alloc for pin names failed\n"); | |
| return -ENOMEM; | |
| } | |
| /* for each pin, the name of the pin is pin-bank name + pin number */ | |
| for (bank = 0; bank < drvdata->ctrl->nr_banks; bank++) { | |
| pin_bank = &drvdata->ctrl->pin_banks[bank]; | |
| for (pin = 0; pin < pin_bank->nr_pins; pin++) { | |
| sprintf(pin_names, "%s-%d", pin_bank->name, pin); | |
| pdesc = pindesc + pin_bank->pin_base + pin; | |
| pdesc->name = pin_names; | |
| pin_names += PIN_NAME_LENGTH; | |
| } | |
| } | |
| ret = samsung_pinctrl_parse_dt(pdev, drvdata); | |
| if (ret) | |
| return ret; | |
| drvdata->pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, drvdata); | |
| if (!drvdata->pctl_dev) { | |
| dev_err(&pdev->dev, "could not register pinctrl driver\n"); | |
| return -EINVAL; | |
| } | |
| for (bank = 0; bank < drvdata->ctrl->nr_banks; ++bank) { | |
| pin_bank = &drvdata->ctrl->pin_banks[bank]; | |
| pin_bank->grange.name = pin_bank->name; | |
| pin_bank->grange.id = bank; | |
| pin_bank->grange.pin_base = pin_bank->pin_base; | |
| pin_bank->grange.base = pin_bank->gpio_chip.base; | |
| pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; | |
| pin_bank->grange.gc = &pin_bank->gpio_chip; | |
| pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange); | |
| } | |
| return 0; | |
| } | |
| static const struct gpio_chip samsung_gpiolib_chip = { | |
| .set = samsung_gpio_set, | |
| .get = samsung_gpio_get, | |
| .direction_input = samsung_gpio_direction_input, | |
| .direction_output = samsung_gpio_direction_output, | |
| .to_irq = samsung_gpio_to_irq, | |
| .owner = THIS_MODULE, | |
| }; | |
| /* register the gpiolib interface with the gpiolib subsystem */ | |
| static int samsung_gpiolib_register(struct platform_device *pdev, | |
| struct samsung_pinctrl_drv_data *drvdata) | |
| { | |
| struct samsung_pin_ctrl *ctrl = drvdata->ctrl; | |
| struct samsung_pin_bank *bank = ctrl->pin_banks; | |
| struct gpio_chip *gc; | |
| int ret; | |
| int i; | |
| for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { | |
| bank->gpio_chip = samsung_gpiolib_chip; | |
| gc = &bank->gpio_chip; | |
| gc->base = ctrl->base + bank->pin_base; | |
| gc->ngpio = bank->nr_pins; | |
| gc->dev = &pdev->dev; | |
| gc->of_node = bank->of_node; | |
| gc->label = bank->name; | |
| ret = gpiochip_add(gc); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n", | |
| gc->label, ret); | |
| goto fail; | |
| } | |
| } | |
| return 0; | |
| fail: | |
| for (--i, --bank; i >= 0; --i, --bank) | |
| if (gpiochip_remove(&bank->gpio_chip)) | |
| dev_err(&pdev->dev, "gpio chip %s remove failed\n", | |
| bank->gpio_chip.label); | |
| return ret; | |
| } | |
| /* unregister the gpiolib interface with the gpiolib subsystem */ | |
| static int samsung_gpiolib_unregister(struct platform_device *pdev, | |
| struct samsung_pinctrl_drv_data *drvdata) | |
| { | |
| struct samsung_pin_ctrl *ctrl = drvdata->ctrl; | |
| struct samsung_pin_bank *bank = ctrl->pin_banks; | |
| int ret = 0; | |
| int i; | |
| for (i = 0; !ret && i < ctrl->nr_banks; ++i, ++bank) | |
| ret = gpiochip_remove(&bank->gpio_chip); | |
| if (ret) | |
| dev_err(&pdev->dev, "gpio chip remove failed\n"); | |
| return ret; | |
| } | |
| static const struct of_device_id samsung_pinctrl_dt_match[]; | |
| /* retrieve the soc specific data */ | |
| static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data( | |
| struct samsung_pinctrl_drv_data *d, | |
| struct platform_device *pdev) | |
| { | |
| int id; | |
| const struct of_device_id *match; | |
| struct device_node *node = pdev->dev.of_node; | |
| struct device_node *np; | |
| struct samsung_pin_ctrl *ctrl; | |
| struct samsung_pin_bank *bank; | |
| int i; | |
| id = of_alias_get_id(node, "pinctrl"); | |
| if (id < 0) { | |
| dev_err(&pdev->dev, "failed to get alias id\n"); | |
| return NULL; | |
| } | |
| match = of_match_node(samsung_pinctrl_dt_match, node); | |
| ctrl = (struct samsung_pin_ctrl *)match->data + id; | |
| bank = ctrl->pin_banks; | |
| for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { | |
| spin_lock_init(&bank->slock); | |
| bank->drvdata = d; | |
| bank->pin_base = ctrl->nr_pins; | |
| ctrl->nr_pins += bank->nr_pins; | |
| } | |
| for_each_child_of_node(node, np) { | |
| if (!of_find_property(np, "gpio-controller", NULL)) | |
| continue; | |
| bank = ctrl->pin_banks; | |
| for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { | |
| if (!strcmp(bank->name, np->name)) { | |
| bank->of_node = np; | |
| break; | |
| } | |
| } | |
| } | |
| ctrl->base = pin_base; | |
| pin_base += ctrl->nr_pins; | |
| return ctrl; | |
| } | |
| static int samsung_pinctrl_probe(struct platform_device *pdev) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| struct device *dev = &pdev->dev; | |
| struct samsung_pin_ctrl *ctrl; | |
| struct resource *res; | |
| int ret; | |
| if (!dev->of_node) { | |
| dev_err(dev, "device tree node not found\n"); | |
| return -ENODEV; | |
| } | |
| drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); | |
| if (!drvdata) { | |
| dev_err(dev, "failed to allocate memory for driver's " | |
| "private data\n"); | |
| return -ENOMEM; | |
| } | |
| ctrl = samsung_pinctrl_get_soc_data(drvdata, pdev); | |
| if (!ctrl) { | |
| dev_err(&pdev->dev, "driver data not available\n"); | |
| return -EINVAL; | |
| } | |
| drvdata->ctrl = ctrl; | |
| drvdata->dev = dev; | |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| drvdata->virt_base = devm_ioremap_resource(&pdev->dev, res); | |
| if (IS_ERR(drvdata->virt_base)) | |
| return PTR_ERR(drvdata->virt_base); | |
| res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | |
| if (res) | |
| drvdata->irq = res->start; | |
| ret = samsung_gpiolib_register(pdev, drvdata); | |
| if (ret) | |
| return ret; | |
| ret = samsung_pinctrl_register(pdev, drvdata); | |
| if (ret) { | |
| samsung_gpiolib_unregister(pdev, drvdata); | |
| return ret; | |
| } | |
| if (ctrl->eint_gpio_init) | |
| ctrl->eint_gpio_init(drvdata); | |
| if (ctrl->eint_wkup_init) | |
| ctrl->eint_wkup_init(drvdata); | |
| platform_set_drvdata(pdev, drvdata); | |
| /* Add to the global list */ | |
| list_add_tail(&drvdata->node, &drvdata_list); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| /** | |
| * samsung_pinctrl_suspend_dev - save pinctrl state for suspend for a device | |
| * | |
| * Save data for all banks handled by this device. | |
| */ | |
| static void samsung_pinctrl_suspend_dev( | |
| struct samsung_pinctrl_drv_data *drvdata) | |
| { | |
| struct samsung_pin_ctrl *ctrl = drvdata->ctrl; | |
| void __iomem *virt_base = drvdata->virt_base; | |
| int i; | |
| for (i = 0; i < ctrl->nr_banks; i++) { | |
| struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; | |
| void __iomem *reg = virt_base + bank->pctl_offset; | |
| u8 *offs = bank->type->reg_offset; | |
| u8 *widths = bank->type->fld_width; | |
| enum pincfg_type type; | |
| /* Registers without a powerdown config aren't lost */ | |
| if (!widths[PINCFG_TYPE_CON_PDN]) | |
| continue; | |
| for (type = 0; type < PINCFG_TYPE_NUM; type++) | |
| if (widths[type]) | |
| bank->pm_save[type] = readl(reg + offs[type]); | |
| if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { | |
| /* Some banks have two config registers */ | |
| bank->pm_save[PINCFG_TYPE_NUM] = | |
| readl(reg + offs[PINCFG_TYPE_FUNC] + 4); | |
| pr_debug("Save %s @ %p (con %#010x %08x)\n", | |
| bank->name, reg, | |
| bank->pm_save[PINCFG_TYPE_FUNC], | |
| bank->pm_save[PINCFG_TYPE_NUM]); | |
| } else { | |
| pr_debug("Save %s @ %p (con %#010x)\n", bank->name, | |
| reg, bank->pm_save[PINCFG_TYPE_FUNC]); | |
| } | |
| } | |
| if (ctrl->suspend) | |
| ctrl->suspend(drvdata); | |
| } | |
| /** | |
| * samsung_pinctrl_resume_dev - restore pinctrl state from suspend for a device | |
| * | |
| * Restore one of the banks that was saved during suspend. | |
| * | |
| * We don't bother doing anything complicated to avoid glitching lines since | |
| * we're called before pad retention is turned off. | |
| */ | |
| static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) | |
| { | |
| struct samsung_pin_ctrl *ctrl = drvdata->ctrl; | |
| void __iomem *virt_base = drvdata->virt_base; | |
| int i; | |
| if (ctrl->resume) | |
| ctrl->resume(drvdata); | |
| for (i = 0; i < ctrl->nr_banks; i++) { | |
| struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; | |
| void __iomem *reg = virt_base + bank->pctl_offset; | |
| u8 *offs = bank->type->reg_offset; | |
| u8 *widths = bank->type->fld_width; | |
| enum pincfg_type type; | |
| /* Registers without a powerdown config aren't lost */ | |
| if (!widths[PINCFG_TYPE_CON_PDN]) | |
| continue; | |
| if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { | |
| /* Some banks have two config registers */ | |
| pr_debug("%s @ %p (con %#010x %08x => %#010x %08x)\n", | |
| bank->name, reg, | |
| readl(reg + offs[PINCFG_TYPE_FUNC]), | |
| readl(reg + offs[PINCFG_TYPE_FUNC] + 4), | |
| bank->pm_save[PINCFG_TYPE_FUNC], | |
| bank->pm_save[PINCFG_TYPE_NUM]); | |
| writel(bank->pm_save[PINCFG_TYPE_NUM], | |
| reg + offs[PINCFG_TYPE_FUNC] + 4); | |
| } else { | |
| pr_debug("%s @ %p (con %#010x => %#010x)\n", bank->name, | |
| reg, readl(reg + offs[PINCFG_TYPE_FUNC]), | |
| bank->pm_save[PINCFG_TYPE_FUNC]); | |
| } | |
| for (type = 0; type < PINCFG_TYPE_NUM; type++) | |
| if (widths[type]) | |
| writel(bank->pm_save[type], reg + offs[type]); | |
| } | |
| } | |
| /** | |
| * samsung_pinctrl_suspend - save pinctrl state for suspend | |
| * | |
| * Save data for all banks across all devices. | |
| */ | |
| static int samsung_pinctrl_suspend(void) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| list_for_each_entry(drvdata, &drvdata_list, node) { | |
| samsung_pinctrl_suspend_dev(drvdata); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * samsung_pinctrl_resume - restore pinctrl state for suspend | |
| * | |
| * Restore data for all banks across all devices. | |
| */ | |
| static void samsung_pinctrl_resume(void) | |
| { | |
| struct samsung_pinctrl_drv_data *drvdata; | |
| list_for_each_entry_reverse(drvdata, &drvdata_list, node) { | |
| samsung_pinctrl_resume_dev(drvdata); | |
| } | |
| } | |
| #else | |
| #define samsung_pinctrl_suspend NULL | |
| #define samsung_pinctrl_resume NULL | |
| #endif | |
| static struct syscore_ops samsung_pinctrl_syscore_ops = { | |
| .suspend = samsung_pinctrl_suspend, | |
| .resume = samsung_pinctrl_resume, | |
| }; | |
| static const struct of_device_id samsung_pinctrl_dt_match[] = { | |
| #ifdef CONFIG_PINCTRL_EXYNOS | |
| { .compatible = "samsung,exynos4210-pinctrl", | |
| .data = (void *)exynos4210_pin_ctrl }, | |
| { .compatible = "samsung,exynos4x12-pinctrl", | |
| .data = (void *)exynos4x12_pin_ctrl }, | |
| { .compatible = "samsung,exynos5250-pinctrl", | |
| .data = (void *)exynos5250_pin_ctrl }, | |
| { .compatible = "samsung,exynos5420-pinctrl", | |
| .data = (void *)exynos5420_pin_ctrl }, | |
| { .compatible = "samsung,s5pv210-pinctrl", | |
| .data = (void *)s5pv210_pin_ctrl }, | |
| #endif | |
| #ifdef CONFIG_PINCTRL_S3C64XX | |
| { .compatible = "samsung,s3c64xx-pinctrl", | |
| .data = s3c64xx_pin_ctrl }, | |
| #endif | |
| #ifdef CONFIG_PINCTRL_S3C24XX | |
| { .compatible = "samsung,s3c2412-pinctrl", | |
| .data = s3c2412_pin_ctrl }, | |
| { .compatible = "samsung,s3c2416-pinctrl", | |
| .data = s3c2416_pin_ctrl }, | |
| { .compatible = "samsung,s3c2440-pinctrl", | |
| .data = s3c2440_pin_ctrl }, | |
| { .compatible = "samsung,s3c2450-pinctrl", | |
| .data = s3c2450_pin_ctrl }, | |
| #endif | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match); | |
| static struct platform_driver samsung_pinctrl_driver = { | |
| .probe = samsung_pinctrl_probe, | |
| .driver = { | |
| .name = "samsung-pinctrl", | |
| .owner = THIS_MODULE, | |
| .of_match_table = of_match_ptr(samsung_pinctrl_dt_match), | |
| }, | |
| }; | |
| static int __init samsung_pinctrl_drv_register(void) | |
| { | |
| /* | |
| * Register syscore ops for save/restore of registers across suspend. | |
| * It's important to ensure that this driver is running at an earlier | |
| * initcall level than any arch-specific init calls that install syscore | |
| * ops that turn off pad retention (like exynos_pm_resume). | |
| */ | |
| register_syscore_ops(&samsung_pinctrl_syscore_ops); | |
| return platform_driver_register(&samsung_pinctrl_driver); | |
| } | |
| postcore_initcall(samsung_pinctrl_drv_register); | |
| static void __exit samsung_pinctrl_drv_unregister(void) | |
| { | |
| platform_driver_unregister(&samsung_pinctrl_driver); | |
| } | |
| module_exit(samsung_pinctrl_drv_unregister); | |
| MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); | |
| MODULE_DESCRIPTION("Samsung pinctrl driver"); | |
| MODULE_LICENSE("GPL v2"); |