| /* | |
| * mac80211 configuration hooks for cfg80211 | |
| * | |
| * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> | |
| * | |
| * This file is GPLv2 as found in COPYING. | |
| */ | |
| #include <linux/ieee80211.h> | |
| #include <linux/nl80211.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/slab.h> | |
| #include <net/net_namespace.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/if_ether.h> | |
| #include <net/cfg80211.h> | |
| #include "ieee80211_i.h" | |
| #include "driver-ops.h" | |
| #include "cfg.h" | |
| #include "rate.h" | |
| #include "mesh.h" | |
| static struct wireless_dev *ieee80211_add_iface(struct wiphy *wiphy, | |
| const char *name, | |
| enum nl80211_iftype type, | |
| u32 *flags, | |
| struct vif_params *params) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct wireless_dev *wdev; | |
| struct ieee80211_sub_if_data *sdata; | |
| int err; | |
| err = ieee80211_if_add(local, name, &wdev, type, params); | |
| if (err) | |
| return ERR_PTR(err); | |
| if (type == NL80211_IFTYPE_MONITOR && flags) { | |
| sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| sdata->u.mntr_flags = *flags; | |
| } | |
| return wdev; | |
| } | |
| static int ieee80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) | |
| { | |
| ieee80211_if_remove(IEEE80211_WDEV_TO_SUB_IF(wdev)); | |
| return 0; | |
| } | |
| static int ieee80211_change_iface(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| enum nl80211_iftype type, u32 *flags, | |
| struct vif_params *params) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| int ret; | |
| ret = ieee80211_if_change_type(sdata, type); | |
| if (ret) | |
| return ret; | |
| if (type == NL80211_IFTYPE_AP_VLAN && | |
| params && params->use_4addr == 0) | |
| RCU_INIT_POINTER(sdata->u.vlan.sta, NULL); | |
| else if (type == NL80211_IFTYPE_STATION && | |
| params && params->use_4addr >= 0) | |
| sdata->u.mgd.use_4addr = params->use_4addr; | |
| if (sdata->vif.type == NL80211_IFTYPE_MONITOR && flags) { | |
| struct ieee80211_local *local = sdata->local; | |
| if (ieee80211_sdata_running(sdata)) { | |
| u32 mask = MONITOR_FLAG_COOK_FRAMES | | |
| MONITOR_FLAG_ACTIVE; | |
| /* | |
| * Prohibit MONITOR_FLAG_COOK_FRAMES and | |
| * MONITOR_FLAG_ACTIVE to be changed while the | |
| * interface is up. | |
| * Else we would need to add a lot of cruft | |
| * to update everything: | |
| * cooked_mntrs, monitor and all fif_* counters | |
| * reconfigure hardware | |
| */ | |
| if ((*flags & mask) != (sdata->u.mntr_flags & mask)) | |
| return -EBUSY; | |
| ieee80211_adjust_monitor_flags(sdata, -1); | |
| sdata->u.mntr_flags = *flags; | |
| ieee80211_adjust_monitor_flags(sdata, 1); | |
| ieee80211_configure_filter(local); | |
| } else { | |
| /* | |
| * Because the interface is down, ieee80211_do_stop | |
| * and ieee80211_do_open take care of "everything" | |
| * mentioned in the comment above. | |
| */ | |
| sdata->u.mntr_flags = *flags; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int ieee80211_start_p2p_device(struct wiphy *wiphy, | |
| struct wireless_dev *wdev) | |
| { | |
| return ieee80211_do_open(wdev, true); | |
| } | |
| static void ieee80211_stop_p2p_device(struct wiphy *wiphy, | |
| struct wireless_dev *wdev) | |
| { | |
| ieee80211_sdata_stop(IEEE80211_WDEV_TO_SUB_IF(wdev)); | |
| } | |
| static int ieee80211_set_noack_map(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| u16 noack_map) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| sdata->noack_map = noack_map; | |
| return 0; | |
| } | |
| static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, | |
| u8 key_idx, bool pairwise, const u8 *mac_addr, | |
| struct key_params *params) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct sta_info *sta = NULL; | |
| struct ieee80211_key *key; | |
| int err; | |
| if (!ieee80211_sdata_running(sdata)) | |
| return -ENETDOWN; | |
| /* reject WEP and TKIP keys if WEP failed to initialize */ | |
| switch (params->cipher) { | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| if (IS_ERR(sdata->local->wep_tx_tfm)) | |
| return -EINVAL; | |
| break; | |
| default: | |
| break; | |
| } | |
| key = ieee80211_key_alloc(params->cipher, key_idx, params->key_len, | |
| params->key, params->seq_len, params->seq); | |
| if (IS_ERR(key)) | |
| return PTR_ERR(key); | |
| if (pairwise) | |
| key->conf.flags |= IEEE80211_KEY_FLAG_PAIRWISE; | |
| mutex_lock(&sdata->local->sta_mtx); | |
| if (mac_addr) { | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| sta = sta_info_get(sdata, mac_addr); | |
| else | |
| sta = sta_info_get_bss(sdata, mac_addr); | |
| /* | |
| * The ASSOC test makes sure the driver is ready to | |
| * receive the key. When wpa_supplicant has roamed | |
| * using FT, it attempts to set the key before | |
| * association has completed, this rejects that attempt | |
| * so it will set the key again after assocation. | |
| * | |
| * TODO: accept the key if we have a station entry and | |
| * add it to the device after the station. | |
| */ | |
| if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) { | |
| ieee80211_key_free_unused(key); | |
| err = -ENOENT; | |
| goto out_unlock; | |
| } | |
| } | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_STATION: | |
| if (sdata->u.mgd.mfp != IEEE80211_MFP_DISABLED) | |
| key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_AP_VLAN: | |
| /* Keys without a station are used for TX only */ | |
| if (key->sta && test_sta_flag(key->sta, WLAN_STA_MFP)) | |
| key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| /* no MFP (yet) */ | |
| break; | |
| case NL80211_IFTYPE_MESH_POINT: | |
| #ifdef CONFIG_MAC80211_MESH | |
| if (sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE) | |
| key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | |
| break; | |
| #endif | |
| case NL80211_IFTYPE_WDS: | |
| case NL80211_IFTYPE_MONITOR: | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| case NL80211_IFTYPE_UNSPECIFIED: | |
| case NUM_NL80211_IFTYPES: | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_GO: | |
| /* shouldn't happen */ | |
| WARN_ON_ONCE(1); | |
| break; | |
| } | |
| err = ieee80211_key_link(key, sdata, sta); | |
| out_unlock: | |
| mutex_unlock(&sdata->local->sta_mtx); | |
| return err; | |
| } | |
| static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, | |
| u8 key_idx, bool pairwise, const u8 *mac_addr) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta; | |
| struct ieee80211_key *key = NULL; | |
| int ret; | |
| mutex_lock(&local->sta_mtx); | |
| mutex_lock(&local->key_mtx); | |
| if (mac_addr) { | |
| ret = -ENOENT; | |
| sta = sta_info_get_bss(sdata, mac_addr); | |
| if (!sta) | |
| goto out_unlock; | |
| if (pairwise) | |
| key = key_mtx_dereference(local, sta->ptk); | |
| else | |
| key = key_mtx_dereference(local, sta->gtk[key_idx]); | |
| } else | |
| key = key_mtx_dereference(local, sdata->keys[key_idx]); | |
| if (!key) { | |
| ret = -ENOENT; | |
| goto out_unlock; | |
| } | |
| ieee80211_key_free(key, true); | |
| ret = 0; | |
| out_unlock: | |
| mutex_unlock(&local->key_mtx); | |
| mutex_unlock(&local->sta_mtx); | |
| return ret; | |
| } | |
| static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, | |
| u8 key_idx, bool pairwise, const u8 *mac_addr, | |
| void *cookie, | |
| void (*callback)(void *cookie, | |
| struct key_params *params)) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct sta_info *sta = NULL; | |
| u8 seq[6] = {0}; | |
| struct key_params params; | |
| struct ieee80211_key *key = NULL; | |
| u64 pn64; | |
| u32 iv32; | |
| u16 iv16; | |
| int err = -ENOENT; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| rcu_read_lock(); | |
| if (mac_addr) { | |
| sta = sta_info_get_bss(sdata, mac_addr); | |
| if (!sta) | |
| goto out; | |
| if (pairwise) | |
| key = rcu_dereference(sta->ptk); | |
| else if (key_idx < NUM_DEFAULT_KEYS) | |
| key = rcu_dereference(sta->gtk[key_idx]); | |
| } else | |
| key = rcu_dereference(sdata->keys[key_idx]); | |
| if (!key) | |
| goto out; | |
| memset(¶ms, 0, sizeof(params)); | |
| params.cipher = key->conf.cipher; | |
| switch (key->conf.cipher) { | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| iv32 = key->u.tkip.tx.iv32; | |
| iv16 = key->u.tkip.tx.iv16; | |
| if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) | |
| drv_get_tkip_seq(sdata->local, | |
| key->conf.hw_key_idx, | |
| &iv32, &iv16); | |
| seq[0] = iv16 & 0xff; | |
| seq[1] = (iv16 >> 8) & 0xff; | |
| seq[2] = iv32 & 0xff; | |
| seq[3] = (iv32 >> 8) & 0xff; | |
| seq[4] = (iv32 >> 16) & 0xff; | |
| seq[5] = (iv32 >> 24) & 0xff; | |
| params.seq = seq; | |
| params.seq_len = 6; | |
| break; | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| pn64 = atomic64_read(&key->u.ccmp.tx_pn); | |
| seq[0] = pn64; | |
| seq[1] = pn64 >> 8; | |
| seq[2] = pn64 >> 16; | |
| seq[3] = pn64 >> 24; | |
| seq[4] = pn64 >> 32; | |
| seq[5] = pn64 >> 40; | |
| params.seq = seq; | |
| params.seq_len = 6; | |
| break; | |
| case WLAN_CIPHER_SUITE_AES_CMAC: | |
| pn64 = atomic64_read(&key->u.aes_cmac.tx_pn); | |
| seq[0] = pn64; | |
| seq[1] = pn64 >> 8; | |
| seq[2] = pn64 >> 16; | |
| seq[3] = pn64 >> 24; | |
| seq[4] = pn64 >> 32; | |
| seq[5] = pn64 >> 40; | |
| params.seq = seq; | |
| params.seq_len = 6; | |
| break; | |
| } | |
| params.key = key->conf.key; | |
| params.key_len = key->conf.keylen; | |
| callback(cookie, ¶ms); | |
| err = 0; | |
| out: | |
| rcu_read_unlock(); | |
| return err; | |
| } | |
| static int ieee80211_config_default_key(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| u8 key_idx, bool uni, | |
| bool multi) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| ieee80211_set_default_key(sdata, key_idx, uni, multi); | |
| return 0; | |
| } | |
| static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| u8 key_idx) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| ieee80211_set_default_mgmt_key(sdata, key_idx); | |
| return 0; | |
| } | |
| void sta_set_rate_info_tx(struct sta_info *sta, | |
| const struct ieee80211_tx_rate *rate, | |
| struct rate_info *rinfo) | |
| { | |
| rinfo->flags = 0; | |
| if (rate->flags & IEEE80211_TX_RC_MCS) { | |
| rinfo->flags |= RATE_INFO_FLAGS_MCS; | |
| rinfo->mcs = rate->idx; | |
| } else if (rate->flags & IEEE80211_TX_RC_VHT_MCS) { | |
| rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS; | |
| rinfo->mcs = ieee80211_rate_get_vht_mcs(rate); | |
| rinfo->nss = ieee80211_rate_get_vht_nss(rate); | |
| } else { | |
| struct ieee80211_supported_band *sband; | |
| int shift = ieee80211_vif_get_shift(&sta->sdata->vif); | |
| u16 brate; | |
| sband = sta->local->hw.wiphy->bands[ | |
| ieee80211_get_sdata_band(sta->sdata)]; | |
| brate = sband->bitrates[rate->idx].bitrate; | |
| rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); | |
| } | |
| if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) | |
| rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; | |
| if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH) | |
| rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH; | |
| if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH) | |
| rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH; | |
| if (rate->flags & IEEE80211_TX_RC_SHORT_GI) | |
| rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; | |
| } | |
| void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo) | |
| { | |
| rinfo->flags = 0; | |
| if (sta->last_rx_rate_flag & RX_FLAG_HT) { | |
| rinfo->flags |= RATE_INFO_FLAGS_MCS; | |
| rinfo->mcs = sta->last_rx_rate_idx; | |
| } else if (sta->last_rx_rate_flag & RX_FLAG_VHT) { | |
| rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS; | |
| rinfo->nss = sta->last_rx_rate_vht_nss; | |
| rinfo->mcs = sta->last_rx_rate_idx; | |
| } else { | |
| struct ieee80211_supported_band *sband; | |
| int shift = ieee80211_vif_get_shift(&sta->sdata->vif); | |
| u16 brate; | |
| sband = sta->local->hw.wiphy->bands[ | |
| ieee80211_get_sdata_band(sta->sdata)]; | |
| brate = sband->bitrates[sta->last_rx_rate_idx].bitrate; | |
| rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); | |
| } | |
| if (sta->last_rx_rate_flag & RX_FLAG_40MHZ) | |
| rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; | |
| if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI) | |
| rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; | |
| if (sta->last_rx_rate_flag & RX_FLAG_80MHZ) | |
| rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH; | |
| if (sta->last_rx_rate_flag & RX_FLAG_80P80MHZ) | |
| rinfo->flags |= RATE_INFO_FLAGS_80P80_MHZ_WIDTH; | |
| if (sta->last_rx_rate_flag & RX_FLAG_160MHZ) | |
| rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH; | |
| } | |
| static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) | |
| { | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| struct timespec uptime; | |
| u64 packets = 0; | |
| int i, ac; | |
| sinfo->generation = sdata->local->sta_generation; | |
| sinfo->filled = STATION_INFO_INACTIVE_TIME | | |
| STATION_INFO_RX_BYTES64 | | |
| STATION_INFO_TX_BYTES64 | | |
| STATION_INFO_RX_PACKETS | | |
| STATION_INFO_TX_PACKETS | | |
| STATION_INFO_TX_RETRIES | | |
| STATION_INFO_TX_FAILED | | |
| STATION_INFO_TX_BITRATE | | |
| STATION_INFO_RX_BITRATE | | |
| STATION_INFO_RX_DROP_MISC | | |
| STATION_INFO_BSS_PARAM | | |
| STATION_INFO_CONNECTED_TIME | | |
| STATION_INFO_STA_FLAGS | | |
| STATION_INFO_BEACON_LOSS_COUNT; | |
| do_posix_clock_monotonic_gettime(&uptime); | |
| sinfo->connected_time = uptime.tv_sec - sta->last_connected; | |
| sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx); | |
| sinfo->tx_bytes = 0; | |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | |
| sinfo->tx_bytes += sta->tx_bytes[ac]; | |
| packets += sta->tx_packets[ac]; | |
| } | |
| sinfo->tx_packets = packets; | |
| sinfo->rx_bytes = sta->rx_bytes; | |
| sinfo->rx_packets = sta->rx_packets; | |
| sinfo->tx_retries = sta->tx_retry_count; | |
| sinfo->tx_failed = sta->tx_retry_failed; | |
| sinfo->rx_dropped_misc = sta->rx_dropped; | |
| sinfo->beacon_loss_count = sta->beacon_loss_count; | |
| if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) || | |
| (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) { | |
| sinfo->filled |= STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG; | |
| if (!local->ops->get_rssi || | |
| drv_get_rssi(local, sdata, &sta->sta, &sinfo->signal)) | |
| sinfo->signal = (s8)sta->last_signal; | |
| sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal); | |
| } | |
| if (sta->chains) { | |
| sinfo->filled |= STATION_INFO_CHAIN_SIGNAL | | |
| STATION_INFO_CHAIN_SIGNAL_AVG; | |
| sinfo->chains = sta->chains; | |
| for (i = 0; i < ARRAY_SIZE(sinfo->chain_signal); i++) { | |
| sinfo->chain_signal[i] = sta->chain_signal_last[i]; | |
| sinfo->chain_signal_avg[i] = | |
| (s8) -ewma_read(&sta->chain_signal_avg[i]); | |
| } | |
| } | |
| sta_set_rate_info_tx(sta, &sta->last_tx_rate, &sinfo->txrate); | |
| sta_set_rate_info_rx(sta, &sinfo->rxrate); | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| #ifdef CONFIG_MAC80211_MESH | |
| sinfo->filled |= STATION_INFO_LLID | | |
| STATION_INFO_PLID | | |
| STATION_INFO_PLINK_STATE | | |
| STATION_INFO_LOCAL_PM | | |
| STATION_INFO_PEER_PM | | |
| STATION_INFO_NONPEER_PM; | |
| sinfo->llid = le16_to_cpu(sta->llid); | |
| sinfo->plid = le16_to_cpu(sta->plid); | |
| sinfo->plink_state = sta->plink_state; | |
| if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) { | |
| sinfo->filled |= STATION_INFO_T_OFFSET; | |
| sinfo->t_offset = sta->t_offset; | |
| } | |
| sinfo->local_pm = sta->local_pm; | |
| sinfo->peer_pm = sta->peer_pm; | |
| sinfo->nonpeer_pm = sta->nonpeer_pm; | |
| #endif | |
| } | |
| sinfo->bss_param.flags = 0; | |
| if (sdata->vif.bss_conf.use_cts_prot) | |
| sinfo->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT; | |
| if (sdata->vif.bss_conf.use_short_preamble) | |
| sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE; | |
| if (sdata->vif.bss_conf.use_short_slot) | |
| sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME; | |
| sinfo->bss_param.dtim_period = sdata->local->hw.conf.ps_dtim_period; | |
| sinfo->bss_param.beacon_interval = sdata->vif.bss_conf.beacon_int; | |
| sinfo->sta_flags.set = 0; | |
| sinfo->sta_flags.mask = BIT(NL80211_STA_FLAG_AUTHORIZED) | | |
| BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) | | |
| BIT(NL80211_STA_FLAG_WME) | | |
| BIT(NL80211_STA_FLAG_MFP) | | |
| BIT(NL80211_STA_FLAG_AUTHENTICATED) | | |
| BIT(NL80211_STA_FLAG_ASSOCIATED) | | |
| BIT(NL80211_STA_FLAG_TDLS_PEER); | |
| if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED); | |
| if (test_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE)) | |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_SHORT_PREAMBLE); | |
| if (test_sta_flag(sta, WLAN_STA_WME)) | |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_WME); | |
| if (test_sta_flag(sta, WLAN_STA_MFP)) | |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP); | |
| if (test_sta_flag(sta, WLAN_STA_AUTH)) | |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED); | |
| if (test_sta_flag(sta, WLAN_STA_ASSOC)) | |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_ASSOCIATED); | |
| if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) | |
| sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER); | |
| } | |
| static const char ieee80211_gstrings_sta_stats[][ETH_GSTRING_LEN] = { | |
| "rx_packets", "rx_bytes", "wep_weak_iv_count", | |
| "rx_duplicates", "rx_fragments", "rx_dropped", | |
| "tx_packets", "tx_bytes", "tx_fragments", | |
| "tx_filtered", "tx_retry_failed", "tx_retries", | |
| "beacon_loss", "sta_state", "txrate", "rxrate", "signal", | |
| "channel", "noise", "ch_time", "ch_time_busy", | |
| "ch_time_ext_busy", "ch_time_rx", "ch_time_tx" | |
| }; | |
| #define STA_STATS_LEN ARRAY_SIZE(ieee80211_gstrings_sta_stats) | |
| static int ieee80211_get_et_sset_count(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| int sset) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| int rv = 0; | |
| if (sset == ETH_SS_STATS) | |
| rv += STA_STATS_LEN; | |
| rv += drv_get_et_sset_count(sdata, sset); | |
| if (rv == 0) | |
| return -EOPNOTSUPP; | |
| return rv; | |
| } | |
| static void ieee80211_get_et_stats(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct ethtool_stats *stats, | |
| u64 *data) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| struct ieee80211_channel *channel; | |
| struct sta_info *sta; | |
| struct ieee80211_local *local = sdata->local; | |
| struct station_info sinfo; | |
| struct survey_info survey; | |
| int i, q; | |
| #define STA_STATS_SURVEY_LEN 7 | |
| memset(data, 0, sizeof(u64) * STA_STATS_LEN); | |
| #define ADD_STA_STATS(sta) \ | |
| do { \ | |
| data[i++] += sta->rx_packets; \ | |
| data[i++] += sta->rx_bytes; \ | |
| data[i++] += sta->wep_weak_iv_count; \ | |
| data[i++] += sta->num_duplicates; \ | |
| data[i++] += sta->rx_fragments; \ | |
| data[i++] += sta->rx_dropped; \ | |
| \ | |
| data[i++] += sinfo.tx_packets; \ | |
| data[i++] += sinfo.tx_bytes; \ | |
| data[i++] += sta->tx_fragments; \ | |
| data[i++] += sta->tx_filtered_count; \ | |
| data[i++] += sta->tx_retry_failed; \ | |
| data[i++] += sta->tx_retry_count; \ | |
| data[i++] += sta->beacon_loss_count; \ | |
| } while (0) | |
| /* For Managed stations, find the single station based on BSSID | |
| * and use that. For interface types, iterate through all available | |
| * stations and add stats for any station that is assigned to this | |
| * network device. | |
| */ | |
| mutex_lock(&local->sta_mtx); | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION) { | |
| sta = sta_info_get_bss(sdata, sdata->u.mgd.bssid); | |
| if (!(sta && !WARN_ON(sta->sdata->dev != dev))) | |
| goto do_survey; | |
| sinfo.filled = 0; | |
| sta_set_sinfo(sta, &sinfo); | |
| i = 0; | |
| ADD_STA_STATS(sta); | |
| data[i++] = sta->sta_state; | |
| if (sinfo.filled & STATION_INFO_TX_BITRATE) | |
| data[i] = 100000 * | |
| cfg80211_calculate_bitrate(&sinfo.txrate); | |
| i++; | |
| if (sinfo.filled & STATION_INFO_RX_BITRATE) | |
| data[i] = 100000 * | |
| cfg80211_calculate_bitrate(&sinfo.rxrate); | |
| i++; | |
| if (sinfo.filled & STATION_INFO_SIGNAL_AVG) | |
| data[i] = (u8)sinfo.signal_avg; | |
| i++; | |
| } else { | |
| list_for_each_entry(sta, &local->sta_list, list) { | |
| /* Make sure this station belongs to the proper dev */ | |
| if (sta->sdata->dev != dev) | |
| continue; | |
| sinfo.filled = 0; | |
| sta_set_sinfo(sta, &sinfo); | |
| i = 0; | |
| ADD_STA_STATS(sta); | |
| } | |
| } | |
| do_survey: | |
| i = STA_STATS_LEN - STA_STATS_SURVEY_LEN; | |
| /* Get survey stats for current channel */ | |
| survey.filled = 0; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (chanctx_conf) | |
| channel = chanctx_conf->def.chan; | |
| else | |
| channel = NULL; | |
| rcu_read_unlock(); | |
| if (channel) { | |
| q = 0; | |
| do { | |
| survey.filled = 0; | |
| if (drv_get_survey(local, q, &survey) != 0) { | |
| survey.filled = 0; | |
| break; | |
| } | |
| q++; | |
| } while (channel != survey.channel); | |
| } | |
| if (survey.filled) | |
| data[i++] = survey.channel->center_freq; | |
| else | |
| data[i++] = 0; | |
| if (survey.filled & SURVEY_INFO_NOISE_DBM) | |
| data[i++] = (u8)survey.noise; | |
| else | |
| data[i++] = -1LL; | |
| if (survey.filled & SURVEY_INFO_CHANNEL_TIME) | |
| data[i++] = survey.channel_time; | |
| else | |
| data[i++] = -1LL; | |
| if (survey.filled & SURVEY_INFO_CHANNEL_TIME_BUSY) | |
| data[i++] = survey.channel_time_busy; | |
| else | |
| data[i++] = -1LL; | |
| if (survey.filled & SURVEY_INFO_CHANNEL_TIME_EXT_BUSY) | |
| data[i++] = survey.channel_time_ext_busy; | |
| else | |
| data[i++] = -1LL; | |
| if (survey.filled & SURVEY_INFO_CHANNEL_TIME_RX) | |
| data[i++] = survey.channel_time_rx; | |
| else | |
| data[i++] = -1LL; | |
| if (survey.filled & SURVEY_INFO_CHANNEL_TIME_TX) | |
| data[i++] = survey.channel_time_tx; | |
| else | |
| data[i++] = -1LL; | |
| mutex_unlock(&local->sta_mtx); | |
| if (WARN_ON(i != STA_STATS_LEN)) | |
| return; | |
| drv_get_et_stats(sdata, stats, &(data[STA_STATS_LEN])); | |
| } | |
| static void ieee80211_get_et_strings(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| u32 sset, u8 *data) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| int sz_sta_stats = 0; | |
| if (sset == ETH_SS_STATS) { | |
| sz_sta_stats = sizeof(ieee80211_gstrings_sta_stats); | |
| memcpy(data, ieee80211_gstrings_sta_stats, sz_sta_stats); | |
| } | |
| drv_get_et_strings(sdata, sset, &(data[sz_sta_stats])); | |
| } | |
| static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev, | |
| int idx, u8 *mac, struct station_info *sinfo) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta; | |
| int ret = -ENOENT; | |
| mutex_lock(&local->sta_mtx); | |
| sta = sta_info_get_by_idx(sdata, idx); | |
| if (sta) { | |
| ret = 0; | |
| memcpy(mac, sta->sta.addr, ETH_ALEN); | |
| sta_set_sinfo(sta, sinfo); | |
| } | |
| mutex_unlock(&local->sta_mtx); | |
| return ret; | |
| } | |
| static int ieee80211_dump_survey(struct wiphy *wiphy, struct net_device *dev, | |
| int idx, struct survey_info *survey) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| return drv_get_survey(local, idx, survey); | |
| } | |
| static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *mac, struct station_info *sinfo) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta; | |
| int ret = -ENOENT; | |
| mutex_lock(&local->sta_mtx); | |
| sta = sta_info_get_bss(sdata, mac); | |
| if (sta) { | |
| ret = 0; | |
| sta_set_sinfo(sta, sinfo); | |
| } | |
| mutex_unlock(&local->sta_mtx); | |
| return ret; | |
| } | |
| static int ieee80211_set_monitor_channel(struct wiphy *wiphy, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct ieee80211_sub_if_data *sdata; | |
| int ret = 0; | |
| if (cfg80211_chandef_identical(&local->monitor_chandef, chandef)) | |
| return 0; | |
| mutex_lock(&local->iflist_mtx); | |
| if (local->use_chanctx) { | |
| sdata = rcu_dereference_protected( | |
| local->monitor_sdata, | |
| lockdep_is_held(&local->iflist_mtx)); | |
| if (sdata) { | |
| ieee80211_vif_release_channel(sdata); | |
| ret = ieee80211_vif_use_channel(sdata, chandef, | |
| IEEE80211_CHANCTX_EXCLUSIVE); | |
| } | |
| } else if (local->open_count == local->monitors) { | |
| local->_oper_chandef = *chandef; | |
| ieee80211_hw_config(local, 0); | |
| } | |
| if (ret == 0) | |
| local->monitor_chandef = *chandef; | |
| mutex_unlock(&local->iflist_mtx); | |
| return ret; | |
| } | |
| static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata, | |
| const u8 *resp, size_t resp_len) | |
| { | |
| struct probe_resp *new, *old; | |
| if (!resp || !resp_len) | |
| return 1; | |
| old = rtnl_dereference(sdata->u.ap.probe_resp); | |
| new = kzalloc(sizeof(struct probe_resp) + resp_len, GFP_KERNEL); | |
| if (!new) | |
| return -ENOMEM; | |
| new->len = resp_len; | |
| memcpy(new->data, resp, resp_len); | |
| rcu_assign_pointer(sdata->u.ap.probe_resp, new); | |
| if (old) | |
| kfree_rcu(old, rcu_head); | |
| return 0; | |
| } | |
| int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata, | |
| struct cfg80211_beacon_data *params) | |
| { | |
| struct beacon_data *new, *old; | |
| int new_head_len, new_tail_len; | |
| int size, err; | |
| u32 changed = BSS_CHANGED_BEACON; | |
| old = rtnl_dereference(sdata->u.ap.beacon); | |
| /* Need to have a beacon head if we don't have one yet */ | |
| if (!params->head && !old) | |
| return -EINVAL; | |
| /* new or old head? */ | |
| if (params->head) | |
| new_head_len = params->head_len; | |
| else | |
| new_head_len = old->head_len; | |
| /* new or old tail? */ | |
| if (params->tail || !old) | |
| /* params->tail_len will be zero for !params->tail */ | |
| new_tail_len = params->tail_len; | |
| else | |
| new_tail_len = old->tail_len; | |
| size = sizeof(*new) + new_head_len + new_tail_len; | |
| new = kzalloc(size, GFP_KERNEL); | |
| if (!new) | |
| return -ENOMEM; | |
| /* start filling the new info now */ | |
| /* | |
| * pointers go into the block we allocated, | |
| * memory is | beacon_data | head | tail | | |
| */ | |
| new->head = ((u8 *) new) + sizeof(*new); | |
| new->tail = new->head + new_head_len; | |
| new->head_len = new_head_len; | |
| new->tail_len = new_tail_len; | |
| /* copy in head */ | |
| if (params->head) | |
| memcpy(new->head, params->head, new_head_len); | |
| else | |
| memcpy(new->head, old->head, new_head_len); | |
| /* copy in optional tail */ | |
| if (params->tail) | |
| memcpy(new->tail, params->tail, new_tail_len); | |
| else | |
| if (old) | |
| memcpy(new->tail, old->tail, new_tail_len); | |
| err = ieee80211_set_probe_resp(sdata, params->probe_resp, | |
| params->probe_resp_len); | |
| if (err < 0) | |
| return err; | |
| if (err == 0) | |
| changed |= BSS_CHANGED_AP_PROBE_RESP; | |
| rcu_assign_pointer(sdata->u.ap.beacon, new); | |
| if (old) | |
| kfree_rcu(old, rcu_head); | |
| return changed; | |
| } | |
| static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_ap_settings *params) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct beacon_data *old; | |
| struct ieee80211_sub_if_data *vlan; | |
| u32 changed = BSS_CHANGED_BEACON_INT | | |
| BSS_CHANGED_BEACON_ENABLED | | |
| BSS_CHANGED_BEACON | | |
| BSS_CHANGED_SSID | | |
| BSS_CHANGED_P2P_PS; | |
| int err; | |
| old = rtnl_dereference(sdata->u.ap.beacon); | |
| if (old) | |
| return -EALREADY; | |
| /* TODO: make hostapd tell us what it wants */ | |
| sdata->smps_mode = IEEE80211_SMPS_OFF; | |
| sdata->needed_rx_chains = sdata->local->rx_chains; | |
| sdata->radar_required = params->radar_required; | |
| err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, | |
| IEEE80211_CHANCTX_SHARED); | |
| if (err) | |
| return err; | |
| ieee80211_vif_copy_chanctx_to_vlans(sdata, false); | |
| /* | |
| * Apply control port protocol, this allows us to | |
| * not encrypt dynamic WEP control frames. | |
| */ | |
| sdata->control_port_protocol = params->crypto.control_port_ethertype; | |
| sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt; | |
| list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) { | |
| vlan->control_port_protocol = | |
| params->crypto.control_port_ethertype; | |
| vlan->control_port_no_encrypt = | |
| params->crypto.control_port_no_encrypt; | |
| } | |
| sdata->vif.bss_conf.beacon_int = params->beacon_interval; | |
| sdata->vif.bss_conf.dtim_period = params->dtim_period; | |
| sdata->vif.bss_conf.enable_beacon = true; | |
| sdata->vif.bss_conf.ssid_len = params->ssid_len; | |
| if (params->ssid_len) | |
| memcpy(sdata->vif.bss_conf.ssid, params->ssid, | |
| params->ssid_len); | |
| sdata->vif.bss_conf.hidden_ssid = | |
| (params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE); | |
| memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, | |
| sizeof(sdata->vif.bss_conf.p2p_noa_attr)); | |
| sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow = | |
| params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | |
| if (params->p2p_opp_ps) | |
| sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | |
| IEEE80211_P2P_OPPPS_ENABLE_BIT; | |
| err = ieee80211_assign_beacon(sdata, ¶ms->beacon); | |
| if (err < 0) | |
| return err; | |
| changed |= err; | |
| err = drv_start_ap(sdata->local, sdata); | |
| if (err) { | |
| old = rtnl_dereference(sdata->u.ap.beacon); | |
| if (old) | |
| kfree_rcu(old, rcu_head); | |
| RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); | |
| return err; | |
| } | |
| ieee80211_bss_info_change_notify(sdata, changed); | |
| netif_carrier_on(dev); | |
| list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) | |
| netif_carrier_on(vlan->dev); | |
| return 0; | |
| } | |
| static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_beacon_data *params) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct beacon_data *old; | |
| int err; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| /* don't allow changing the beacon while CSA is in place - offset | |
| * of channel switch counter may change | |
| */ | |
| if (sdata->vif.csa_active) | |
| return -EBUSY; | |
| old = rtnl_dereference(sdata->u.ap.beacon); | |
| if (!old) | |
| return -ENOENT; | |
| err = ieee80211_assign_beacon(sdata, params); | |
| if (err < 0) | |
| return err; | |
| ieee80211_bss_info_change_notify(sdata, err); | |
| return 0; | |
| } | |
| static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_sub_if_data *vlan; | |
| struct ieee80211_local *local = sdata->local; | |
| struct beacon_data *old_beacon; | |
| struct probe_resp *old_probe_resp; | |
| old_beacon = rtnl_dereference(sdata->u.ap.beacon); | |
| if (!old_beacon) | |
| return -ENOENT; | |
| old_probe_resp = rtnl_dereference(sdata->u.ap.probe_resp); | |
| /* abort any running channel switch */ | |
| sdata->vif.csa_active = false; | |
| cancel_work_sync(&sdata->csa_finalize_work); | |
| /* turn off carrier for this interface and dependent VLANs */ | |
| list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) | |
| netif_carrier_off(vlan->dev); | |
| netif_carrier_off(dev); | |
| /* remove beacon and probe response */ | |
| RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); | |
| RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL); | |
| kfree_rcu(old_beacon, rcu_head); | |
| if (old_probe_resp) | |
| kfree_rcu(old_probe_resp, rcu_head); | |
| list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) | |
| sta_info_flush_defer(vlan); | |
| sta_info_flush_defer(sdata); | |
| synchronize_net(); | |
| rcu_barrier(); | |
| list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) { | |
| sta_info_flush_cleanup(vlan); | |
| ieee80211_free_keys(vlan); | |
| } | |
| sta_info_flush_cleanup(sdata); | |
| ieee80211_free_keys(sdata); | |
| sdata->vif.bss_conf.enable_beacon = false; | |
| sdata->vif.bss_conf.ssid_len = 0; | |
| clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); | |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); | |
| if (sdata->wdev.cac_started) { | |
| cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); | |
| cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_ABORTED, | |
| GFP_KERNEL); | |
| } | |
| drv_stop_ap(sdata->local, sdata); | |
| /* free all potentially still buffered bcast frames */ | |
| local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf); | |
| skb_queue_purge(&sdata->u.ap.ps.bc_buf); | |
| ieee80211_vif_copy_chanctx_to_vlans(sdata, true); | |
| ieee80211_vif_release_channel(sdata); | |
| return 0; | |
| } | |
| /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */ | |
| struct iapp_layer2_update { | |
| u8 da[ETH_ALEN]; /* broadcast */ | |
| u8 sa[ETH_ALEN]; /* STA addr */ | |
| __be16 len; /* 6 */ | |
| u8 dsap; /* 0 */ | |
| u8 ssap; /* 0 */ | |
| u8 control; | |
| u8 xid_info[3]; | |
| } __packed; | |
| static void ieee80211_send_layer2_update(struct sta_info *sta) | |
| { | |
| struct iapp_layer2_update *msg; | |
| struct sk_buff *skb; | |
| /* Send Level 2 Update Frame to update forwarding tables in layer 2 | |
| * bridge devices */ | |
| skb = dev_alloc_skb(sizeof(*msg)); | |
| if (!skb) | |
| return; | |
| msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg)); | |
| /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID) | |
| * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */ | |
| eth_broadcast_addr(msg->da); | |
| memcpy(msg->sa, sta->sta.addr, ETH_ALEN); | |
| msg->len = htons(6); | |
| msg->dsap = 0; | |
| msg->ssap = 0x01; /* NULL LSAP, CR Bit: Response */ | |
| msg->control = 0xaf; /* XID response lsb.1111F101. | |
| * F=0 (no poll command; unsolicited frame) */ | |
| msg->xid_info[0] = 0x81; /* XID format identifier */ | |
| msg->xid_info[1] = 1; /* LLC types/classes: Type 1 LLC */ | |
| msg->xid_info[2] = 0; /* XID sender's receive window size (RW) */ | |
| skb->dev = sta->sdata->dev; | |
| skb->protocol = eth_type_trans(skb, sta->sdata->dev); | |
| memset(skb->cb, 0, sizeof(skb->cb)); | |
| netif_rx_ni(skb); | |
| } | |
| static int sta_apply_auth_flags(struct ieee80211_local *local, | |
| struct sta_info *sta, | |
| u32 mask, u32 set) | |
| { | |
| int ret; | |
| if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | |
| set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | |
| !test_sta_flag(sta, WLAN_STA_AUTH)) { | |
| ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); | |
| if (ret) | |
| return ret; | |
| } | |
| if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && | |
| set & BIT(NL80211_STA_FLAG_ASSOCIATED) && | |
| !test_sta_flag(sta, WLAN_STA_ASSOC)) { | |
| ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); | |
| if (ret) | |
| return ret; | |
| } | |
| if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | |
| if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) | |
| ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); | |
| else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | |
| ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); | |
| else | |
| ret = 0; | |
| if (ret) | |
| return ret; | |
| } | |
| if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && | |
| !(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) && | |
| test_sta_flag(sta, WLAN_STA_ASSOC)) { | |
| ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); | |
| if (ret) | |
| return ret; | |
| } | |
| if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | |
| !(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && | |
| test_sta_flag(sta, WLAN_STA_AUTH)) { | |
| ret = sta_info_move_state(sta, IEEE80211_STA_NONE); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int sta_apply_parameters(struct ieee80211_local *local, | |
| struct sta_info *sta, | |
| struct station_parameters *params) | |
| { | |
| int ret = 0; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| enum ieee80211_band band = ieee80211_get_sdata_band(sdata); | |
| u32 mask, set; | |
| sband = local->hw.wiphy->bands[band]; | |
| mask = params->sta_flags_mask; | |
| set = params->sta_flags_set; | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| /* | |
| * In mesh mode, ASSOCIATED isn't part of the nl80211 | |
| * API but must follow AUTHENTICATED for driver state. | |
| */ | |
| if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) | |
| mask |= BIT(NL80211_STA_FLAG_ASSOCIATED); | |
| if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) | |
| set |= BIT(NL80211_STA_FLAG_ASSOCIATED); | |
| } else if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | |
| /* | |
| * TDLS -- everything follows authorized, but | |
| * only becoming authorized is possible, not | |
| * going back | |
| */ | |
| if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | |
| set |= BIT(NL80211_STA_FLAG_AUTHENTICATED) | | |
| BIT(NL80211_STA_FLAG_ASSOCIATED); | |
| mask |= BIT(NL80211_STA_FLAG_AUTHENTICATED) | | |
| BIT(NL80211_STA_FLAG_ASSOCIATED); | |
| } | |
| } | |
| ret = sta_apply_auth_flags(local, sta, mask, set); | |
| if (ret) | |
| return ret; | |
| if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) { | |
| if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) | |
| set_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE); | |
| else | |
| clear_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE); | |
| } | |
| if (mask & BIT(NL80211_STA_FLAG_WME)) { | |
| if (set & BIT(NL80211_STA_FLAG_WME)) { | |
| set_sta_flag(sta, WLAN_STA_WME); | |
| sta->sta.wme = true; | |
| } else { | |
| clear_sta_flag(sta, WLAN_STA_WME); | |
| sta->sta.wme = false; | |
| } | |
| } | |
| if (mask & BIT(NL80211_STA_FLAG_MFP)) { | |
| if (set & BIT(NL80211_STA_FLAG_MFP)) | |
| set_sta_flag(sta, WLAN_STA_MFP); | |
| else | |
| clear_sta_flag(sta, WLAN_STA_MFP); | |
| } | |
| if (mask & BIT(NL80211_STA_FLAG_TDLS_PEER)) { | |
| if (set & BIT(NL80211_STA_FLAG_TDLS_PEER)) | |
| set_sta_flag(sta, WLAN_STA_TDLS_PEER); | |
| else | |
| clear_sta_flag(sta, WLAN_STA_TDLS_PEER); | |
| } | |
| if (params->sta_modify_mask & STATION_PARAM_APPLY_UAPSD) { | |
| sta->sta.uapsd_queues = params->uapsd_queues; | |
| sta->sta.max_sp = params->max_sp; | |
| } | |
| /* | |
| * cfg80211 validates this (1-2007) and allows setting the AID | |
| * only when creating a new station entry | |
| */ | |
| if (params->aid) | |
| sta->sta.aid = params->aid; | |
| /* | |
| * Some of the following updates would be racy if called on an | |
| * existing station, via ieee80211_change_station(). However, | |
| * all such changes are rejected by cfg80211 except for updates | |
| * changing the supported rates on an existing but not yet used | |
| * TDLS peer. | |
| */ | |
| if (params->listen_interval >= 0) | |
| sta->listen_interval = params->listen_interval; | |
| if (params->supported_rates) { | |
| ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, | |
| sband, params->supported_rates, | |
| params->supported_rates_len, | |
| &sta->sta.supp_rates[band]); | |
| } | |
| if (params->ht_capa) | |
| ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, | |
| params->ht_capa, sta); | |
| if (params->vht_capa) | |
| ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, | |
| params->vht_capa, sta); | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| #ifdef CONFIG_MAC80211_MESH | |
| u32 changed = 0; | |
| if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) { | |
| switch (params->plink_state) { | |
| case NL80211_PLINK_ESTAB: | |
| if (sta->plink_state != NL80211_PLINK_ESTAB) | |
| changed = mesh_plink_inc_estab_count( | |
| sdata); | |
| sta->plink_state = params->plink_state; | |
| ieee80211_mps_sta_status_update(sta); | |
| changed |= ieee80211_mps_set_sta_local_pm(sta, | |
| sdata->u.mesh.mshcfg.power_mode); | |
| break; | |
| case NL80211_PLINK_LISTEN: | |
| case NL80211_PLINK_BLOCKED: | |
| case NL80211_PLINK_OPN_SNT: | |
| case NL80211_PLINK_OPN_RCVD: | |
| case NL80211_PLINK_CNF_RCVD: | |
| case NL80211_PLINK_HOLDING: | |
| if (sta->plink_state == NL80211_PLINK_ESTAB) | |
| changed = mesh_plink_dec_estab_count( | |
| sdata); | |
| sta->plink_state = params->plink_state; | |
| ieee80211_mps_sta_status_update(sta); | |
| changed |= | |
| ieee80211_mps_local_status_update(sdata); | |
| break; | |
| default: | |
| /* nothing */ | |
| break; | |
| } | |
| } | |
| switch (params->plink_action) { | |
| case NL80211_PLINK_ACTION_NO_ACTION: | |
| /* nothing */ | |
| break; | |
| case NL80211_PLINK_ACTION_OPEN: | |
| changed |= mesh_plink_open(sta); | |
| break; | |
| case NL80211_PLINK_ACTION_BLOCK: | |
| changed |= mesh_plink_block(sta); | |
| break; | |
| } | |
| if (params->local_pm) | |
| changed |= | |
| ieee80211_mps_set_sta_local_pm(sta, | |
| params->local_pm); | |
| ieee80211_bss_info_change_notify(sdata, changed); | |
| #endif | |
| } | |
| return 0; | |
| } | |
| static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *mac, struct station_parameters *params) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct sta_info *sta; | |
| struct ieee80211_sub_if_data *sdata; | |
| int err; | |
| int layer2_update; | |
| if (params->vlan) { | |
| sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); | |
| if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | |
| sdata->vif.type != NL80211_IFTYPE_AP) | |
| return -EINVAL; | |
| } else | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (ether_addr_equal(mac, sdata->vif.addr)) | |
| return -EINVAL; | |
| if (is_multicast_ether_addr(mac)) | |
| return -EINVAL; | |
| sta = sta_info_alloc(sdata, mac, GFP_KERNEL); | |
| if (!sta) | |
| return -ENOMEM; | |
| /* | |
| * defaults -- if userspace wants something else we'll | |
| * change it accordingly in sta_apply_parameters() | |
| */ | |
| if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) { | |
| sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); | |
| sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); | |
| } | |
| err = sta_apply_parameters(local, sta, params); | |
| if (err) { | |
| sta_info_free(local, sta); | |
| return err; | |
| } | |
| /* | |
| * for TDLS, rate control should be initialized only when | |
| * rates are known and station is marked authorized | |
| */ | |
| if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) | |
| rate_control_rate_init(sta); | |
| layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN || | |
| sdata->vif.type == NL80211_IFTYPE_AP; | |
| err = sta_info_insert_rcu(sta); | |
| if (err) { | |
| rcu_read_unlock(); | |
| return err; | |
| } | |
| if (layer2_update) | |
| ieee80211_send_layer2_update(sta); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *mac) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (mac) | |
| return sta_info_destroy_addr_bss(sdata, mac); | |
| sta_info_flush(sdata); | |
| return 0; | |
| } | |
| static int ieee80211_change_station(struct wiphy *wiphy, | |
| struct net_device *dev, u8 *mac, | |
| struct station_parameters *params) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct sta_info *sta; | |
| struct ieee80211_sub_if_data *vlansdata; | |
| enum cfg80211_station_type statype; | |
| int err; | |
| mutex_lock(&local->sta_mtx); | |
| sta = sta_info_get_bss(sdata, mac); | |
| if (!sta) { | |
| err = -ENOENT; | |
| goto out_err; | |
| } | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_MESH_POINT: | |
| if (sdata->u.mesh.user_mpm) | |
| statype = CFG80211_STA_MESH_PEER_USER; | |
| else | |
| statype = CFG80211_STA_MESH_PEER_KERNEL; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| statype = CFG80211_STA_IBSS; | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | |
| statype = CFG80211_STA_AP_STA; | |
| break; | |
| } | |
| if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | |
| statype = CFG80211_STA_TDLS_PEER_ACTIVE; | |
| else | |
| statype = CFG80211_STA_TDLS_PEER_SETUP; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_AP_VLAN: | |
| statype = CFG80211_STA_AP_CLIENT; | |
| break; | |
| default: | |
| err = -EOPNOTSUPP; | |
| goto out_err; | |
| } | |
| err = cfg80211_check_station_change(wiphy, params, statype); | |
| if (err) | |
| goto out_err; | |
| if (params->vlan && params->vlan != sta->sdata->dev) { | |
| bool prev_4addr = false; | |
| bool new_4addr = false; | |
| vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); | |
| if (params->vlan->ieee80211_ptr->use_4addr) { | |
| if (vlansdata->u.vlan.sta) { | |
| err = -EBUSY; | |
| goto out_err; | |
| } | |
| rcu_assign_pointer(vlansdata->u.vlan.sta, sta); | |
| new_4addr = true; | |
| } | |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | |
| sta->sdata->u.vlan.sta) { | |
| rcu_assign_pointer(sta->sdata->u.vlan.sta, NULL); | |
| prev_4addr = true; | |
| } | |
| sta->sdata = vlansdata; | |
| if (sta->sta_state == IEEE80211_STA_AUTHORIZED && | |
| prev_4addr != new_4addr) { | |
| if (new_4addr) | |
| atomic_dec(&sta->sdata->bss->num_mcast_sta); | |
| else | |
| atomic_inc(&sta->sdata->bss->num_mcast_sta); | |
| } | |
| ieee80211_send_layer2_update(sta); | |
| } | |
| err = sta_apply_parameters(local, sta, params); | |
| if (err) | |
| goto out_err; | |
| /* When peer becomes authorized, init rate control as well */ | |
| if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && | |
| test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | |
| rate_control_rate_init(sta); | |
| mutex_unlock(&local->sta_mtx); | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && | |
| params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | |
| ieee80211_recalc_ps(local, -1); | |
| ieee80211_recalc_ps_vif(sdata); | |
| } | |
| return 0; | |
| out_err: | |
| mutex_unlock(&local->sta_mtx); | |
| return err; | |
| } | |
| #ifdef CONFIG_MAC80211_MESH | |
| static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *dst, u8 *next_hop) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct mesh_path *mpath; | |
| struct sta_info *sta; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| rcu_read_lock(); | |
| sta = sta_info_get(sdata, next_hop); | |
| if (!sta) { | |
| rcu_read_unlock(); | |
| return -ENOENT; | |
| } | |
| mpath = mesh_path_add(sdata, dst); | |
| if (IS_ERR(mpath)) { | |
| rcu_read_unlock(); | |
| return PTR_ERR(mpath); | |
| } | |
| mesh_path_fix_nexthop(mpath, sta); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *dst) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (dst) | |
| return mesh_path_del(sdata, dst); | |
| mesh_path_flush_by_iface(sdata); | |
| return 0; | |
| } | |
| static int ieee80211_change_mpath(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| u8 *dst, u8 *next_hop) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct mesh_path *mpath; | |
| struct sta_info *sta; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| rcu_read_lock(); | |
| sta = sta_info_get(sdata, next_hop); | |
| if (!sta) { | |
| rcu_read_unlock(); | |
| return -ENOENT; | |
| } | |
| mpath = mesh_path_lookup(sdata, dst); | |
| if (!mpath) { | |
| rcu_read_unlock(); | |
| return -ENOENT; | |
| } | |
| mesh_path_fix_nexthop(mpath, sta); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, | |
| struct mpath_info *pinfo) | |
| { | |
| struct sta_info *next_hop_sta = rcu_dereference(mpath->next_hop); | |
| if (next_hop_sta) | |
| memcpy(next_hop, next_hop_sta->sta.addr, ETH_ALEN); | |
| else | |
| memset(next_hop, 0, ETH_ALEN); | |
| memset(pinfo, 0, sizeof(*pinfo)); | |
| pinfo->generation = mesh_paths_generation; | |
| pinfo->filled = MPATH_INFO_FRAME_QLEN | | |
| MPATH_INFO_SN | | |
| MPATH_INFO_METRIC | | |
| MPATH_INFO_EXPTIME | | |
| MPATH_INFO_DISCOVERY_TIMEOUT | | |
| MPATH_INFO_DISCOVERY_RETRIES | | |
| MPATH_INFO_FLAGS; | |
| pinfo->frame_qlen = mpath->frame_queue.qlen; | |
| pinfo->sn = mpath->sn; | |
| pinfo->metric = mpath->metric; | |
| if (time_before(jiffies, mpath->exp_time)) | |
| pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies); | |
| pinfo->discovery_timeout = | |
| jiffies_to_msecs(mpath->discovery_timeout); | |
| pinfo->discovery_retries = mpath->discovery_retries; | |
| if (mpath->flags & MESH_PATH_ACTIVE) | |
| pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE; | |
| if (mpath->flags & MESH_PATH_RESOLVING) | |
| pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING; | |
| if (mpath->flags & MESH_PATH_SN_VALID) | |
| pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID; | |
| if (mpath->flags & MESH_PATH_FIXED) | |
| pinfo->flags |= NL80211_MPATH_FLAG_FIXED; | |
| if (mpath->flags & MESH_PATH_RESOLVED) | |
| pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED; | |
| } | |
| static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *dst, u8 *next_hop, struct mpath_info *pinfo) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct mesh_path *mpath; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| rcu_read_lock(); | |
| mpath = mesh_path_lookup(sdata, dst); | |
| if (!mpath) { | |
| rcu_read_unlock(); | |
| return -ENOENT; | |
| } | |
| memcpy(dst, mpath->dst, ETH_ALEN); | |
| mpath_set_pinfo(mpath, next_hop, pinfo); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, | |
| int idx, u8 *dst, u8 *next_hop, | |
| struct mpath_info *pinfo) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct mesh_path *mpath; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| rcu_read_lock(); | |
| mpath = mesh_path_lookup_by_idx(sdata, idx); | |
| if (!mpath) { | |
| rcu_read_unlock(); | |
| return -ENOENT; | |
| } | |
| memcpy(dst, mpath->dst, ETH_ALEN); | |
| mpath_set_pinfo(mpath, next_hop, pinfo); | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| static int ieee80211_get_mesh_config(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct mesh_config *conf) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config)); | |
| return 0; | |
| } | |
| static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask) | |
| { | |
| return (mask >> (parm-1)) & 0x1; | |
| } | |
| static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh, | |
| const struct mesh_setup *setup) | |
| { | |
| u8 *new_ie; | |
| const u8 *old_ie; | |
| struct ieee80211_sub_if_data *sdata = container_of(ifmsh, | |
| struct ieee80211_sub_if_data, u.mesh); | |
| /* allocate information elements */ | |
| new_ie = NULL; | |
| old_ie = ifmsh->ie; | |
| if (setup->ie_len) { | |
| new_ie = kmemdup(setup->ie, setup->ie_len, | |
| GFP_KERNEL); | |
| if (!new_ie) | |
| return -ENOMEM; | |
| } | |
| ifmsh->ie_len = setup->ie_len; | |
| ifmsh->ie = new_ie; | |
| kfree(old_ie); | |
| /* now copy the rest of the setup parameters */ | |
| ifmsh->mesh_id_len = setup->mesh_id_len; | |
| memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len); | |
| ifmsh->mesh_sp_id = setup->sync_method; | |
| ifmsh->mesh_pp_id = setup->path_sel_proto; | |
| ifmsh->mesh_pm_id = setup->path_metric; | |
| ifmsh->user_mpm = setup->user_mpm; | |
| ifmsh->mesh_auth_id = setup->auth_id; | |
| ifmsh->security = IEEE80211_MESH_SEC_NONE; | |
| if (setup->is_authenticated) | |
| ifmsh->security |= IEEE80211_MESH_SEC_AUTHED; | |
| if (setup->is_secure) | |
| ifmsh->security |= IEEE80211_MESH_SEC_SECURED; | |
| /* mcast rate setting in Mesh Node */ | |
| memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate, | |
| sizeof(setup->mcast_rate)); | |
| sdata->vif.bss_conf.basic_rates = setup->basic_rates; | |
| sdata->vif.bss_conf.beacon_int = setup->beacon_interval; | |
| sdata->vif.bss_conf.dtim_period = setup->dtim_period; | |
| return 0; | |
| } | |
| static int ieee80211_update_mesh_config(struct wiphy *wiphy, | |
| struct net_device *dev, u32 mask, | |
| const struct mesh_config *nconf) | |
| { | |
| struct mesh_config *conf; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_if_mesh *ifmsh; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| ifmsh = &sdata->u.mesh; | |
| /* Set the config options which we are interested in setting */ | |
| conf = &(sdata->u.mesh.mshcfg); | |
| if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask)) | |
| conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask)) | |
| conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask)) | |
| conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask)) | |
| conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask)) | |
| conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask)) | |
| conf->dot11MeshTTL = nconf->dot11MeshTTL; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_ELEMENT_TTL, mask)) | |
| conf->element_ttl = nconf->element_ttl; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask)) { | |
| if (ifmsh->user_mpm) | |
| return -EBUSY; | |
| conf->auto_open_plinks = nconf->auto_open_plinks; | |
| } | |
| if (_chg_mesh_attr(NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, mask)) | |
| conf->dot11MeshNbrOffsetMaxNeighbor = | |
| nconf->dot11MeshNbrOffsetMaxNeighbor; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask)) | |
| conf->dot11MeshHWMPmaxPREQretries = | |
| nconf->dot11MeshHWMPmaxPREQretries; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask)) | |
| conf->path_refresh_time = nconf->path_refresh_time; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask)) | |
| conf->min_discovery_timeout = nconf->min_discovery_timeout; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask)) | |
| conf->dot11MeshHWMPactivePathTimeout = | |
| nconf->dot11MeshHWMPactivePathTimeout; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask)) | |
| conf->dot11MeshHWMPpreqMinInterval = | |
| nconf->dot11MeshHWMPpreqMinInterval; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, mask)) | |
| conf->dot11MeshHWMPperrMinInterval = | |
| nconf->dot11MeshHWMPperrMinInterval; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, | |
| mask)) | |
| conf->dot11MeshHWMPnetDiameterTraversalTime = | |
| nconf->dot11MeshHWMPnetDiameterTraversalTime; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) { | |
| conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode; | |
| ieee80211_mesh_root_setup(ifmsh); | |
| } | |
| if (_chg_mesh_attr(NL80211_MESHCONF_GATE_ANNOUNCEMENTS, mask)) { | |
| /* our current gate announcement implementation rides on root | |
| * announcements, so require this ifmsh to also be a root node | |
| * */ | |
| if (nconf->dot11MeshGateAnnouncementProtocol && | |
| !(conf->dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)) { | |
| conf->dot11MeshHWMPRootMode = IEEE80211_PROACTIVE_RANN; | |
| ieee80211_mesh_root_setup(ifmsh); | |
| } | |
| conf->dot11MeshGateAnnouncementProtocol = | |
| nconf->dot11MeshGateAnnouncementProtocol; | |
| } | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask)) | |
| conf->dot11MeshHWMPRannInterval = | |
| nconf->dot11MeshHWMPRannInterval; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask)) | |
| conf->dot11MeshForwarding = nconf->dot11MeshForwarding; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) { | |
| /* our RSSI threshold implementation is supported only for | |
| * devices that report signal in dBm. | |
| */ | |
| if (!(sdata->local->hw.flags & IEEE80211_HW_SIGNAL_DBM)) | |
| return -ENOTSUPP; | |
| conf->rssi_threshold = nconf->rssi_threshold; | |
| } | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) { | |
| conf->ht_opmode = nconf->ht_opmode; | |
| sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode; | |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT); | |
| } | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, mask)) | |
| conf->dot11MeshHWMPactivePathToRootTimeout = | |
| nconf->dot11MeshHWMPactivePathToRootTimeout; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask)) | |
| conf->dot11MeshHWMProotInterval = | |
| nconf->dot11MeshHWMProotInterval; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask)) | |
| conf->dot11MeshHWMPconfirmationInterval = | |
| nconf->dot11MeshHWMPconfirmationInterval; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) { | |
| conf->power_mode = nconf->power_mode; | |
| ieee80211_mps_local_status_update(sdata); | |
| } | |
| if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) | |
| conf->dot11MeshAwakeWindowDuration = | |
| nconf->dot11MeshAwakeWindowDuration; | |
| if (_chg_mesh_attr(NL80211_MESHCONF_PLINK_TIMEOUT, mask)) | |
| conf->plink_timeout = nconf->plink_timeout; | |
| ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON); | |
| return 0; | |
| } | |
| static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, | |
| const struct mesh_config *conf, | |
| const struct mesh_setup *setup) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| int err; | |
| memcpy(&ifmsh->mshcfg, conf, sizeof(struct mesh_config)); | |
| err = copy_mesh_setup(ifmsh, setup); | |
| if (err) | |
| return err; | |
| /* can mesh use other SMPS modes? */ | |
| sdata->smps_mode = IEEE80211_SMPS_OFF; | |
| sdata->needed_rx_chains = sdata->local->rx_chains; | |
| err = ieee80211_vif_use_channel(sdata, &setup->chandef, | |
| IEEE80211_CHANCTX_SHARED); | |
| if (err) | |
| return err; | |
| return ieee80211_start_mesh(sdata); | |
| } | |
| static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| ieee80211_stop_mesh(sdata); | |
| ieee80211_vif_release_channel(sdata); | |
| return 0; | |
| } | |
| #endif | |
| static int ieee80211_change_bss(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct bss_parameters *params) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| enum ieee80211_band band; | |
| u32 changed = 0; | |
| if (!rtnl_dereference(sdata->u.ap.beacon)) | |
| return -ENOENT; | |
| band = ieee80211_get_sdata_band(sdata); | |
| if (params->use_cts_prot >= 0) { | |
| sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot; | |
| changed |= BSS_CHANGED_ERP_CTS_PROT; | |
| } | |
| if (params->use_short_preamble >= 0) { | |
| sdata->vif.bss_conf.use_short_preamble = | |
| params->use_short_preamble; | |
| changed |= BSS_CHANGED_ERP_PREAMBLE; | |
| } | |
| if (!sdata->vif.bss_conf.use_short_slot && | |
| band == IEEE80211_BAND_5GHZ) { | |
| sdata->vif.bss_conf.use_short_slot = true; | |
| changed |= BSS_CHANGED_ERP_SLOT; | |
| } | |
| if (params->use_short_slot_time >= 0) { | |
| sdata->vif.bss_conf.use_short_slot = | |
| params->use_short_slot_time; | |
| changed |= BSS_CHANGED_ERP_SLOT; | |
| } | |
| if (params->basic_rates) { | |
| ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, | |
| wiphy->bands[band], | |
| params->basic_rates, | |
| params->basic_rates_len, | |
| &sdata->vif.bss_conf.basic_rates); | |
| changed |= BSS_CHANGED_BASIC_RATES; | |
| } | |
| if (params->ap_isolate >= 0) { | |
| if (params->ap_isolate) | |
| sdata->flags |= IEEE80211_SDATA_DONT_BRIDGE_PACKETS; | |
| else | |
| sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS; | |
| } | |
| if (params->ht_opmode >= 0) { | |
| sdata->vif.bss_conf.ht_operation_mode = | |
| (u16) params->ht_opmode; | |
| changed |= BSS_CHANGED_HT; | |
| } | |
| if (params->p2p_ctwindow >= 0) { | |
| sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &= | |
| ~IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | |
| sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | |
| params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | |
| changed |= BSS_CHANGED_P2P_PS; | |
| } | |
| if (params->p2p_opp_ps > 0) { | |
| sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | |
| IEEE80211_P2P_OPPPS_ENABLE_BIT; | |
| changed |= BSS_CHANGED_P2P_PS; | |
| } else if (params->p2p_opp_ps == 0) { | |
| sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &= | |
| ~IEEE80211_P2P_OPPPS_ENABLE_BIT; | |
| changed |= BSS_CHANGED_P2P_PS; | |
| } | |
| ieee80211_bss_info_change_notify(sdata, changed); | |
| return 0; | |
| } | |
| static int ieee80211_set_txq_params(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct ieee80211_txq_params *params) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_tx_queue_params p; | |
| if (!local->ops->conf_tx) | |
| return -EOPNOTSUPP; | |
| if (local->hw.queues < IEEE80211_NUM_ACS) | |
| return -EOPNOTSUPP; | |
| memset(&p, 0, sizeof(p)); | |
| p.aifs = params->aifs; | |
| p.cw_max = params->cwmax; | |
| p.cw_min = params->cwmin; | |
| p.txop = params->txop; | |
| /* | |
| * Setting tx queue params disables u-apsd because it's only | |
| * called in master mode. | |
| */ | |
| p.uapsd = false; | |
| sdata->tx_conf[params->ac] = p; | |
| if (drv_conf_tx(local, sdata, params->ac, &p)) { | |
| wiphy_debug(local->hw.wiphy, | |
| "failed to set TX queue parameters for AC %d\n", | |
| params->ac); | |
| return -EINVAL; | |
| } | |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int ieee80211_suspend(struct wiphy *wiphy, | |
| struct cfg80211_wowlan *wowlan) | |
| { | |
| return __ieee80211_suspend(wiphy_priv(wiphy), wowlan); | |
| } | |
| static int ieee80211_resume(struct wiphy *wiphy) | |
| { | |
| return __ieee80211_resume(wiphy_priv(wiphy)); | |
| } | |
| #else | |
| #define ieee80211_suspend NULL | |
| #define ieee80211_resume NULL | |
| #endif | |
| static int ieee80211_scan(struct wiphy *wiphy, | |
| struct cfg80211_scan_request *req) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| sdata = IEEE80211_WDEV_TO_SUB_IF(req->wdev); | |
| switch (ieee80211_vif_type_p2p(&sdata->vif)) { | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_ADHOC: | |
| case NL80211_IFTYPE_MESH_POINT: | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| break; | |
| case NL80211_IFTYPE_P2P_GO: | |
| if (sdata->local->ops->hw_scan) | |
| break; | |
| /* | |
| * FIXME: implement NoA while scanning in software, | |
| * for now fall through to allow scanning only when | |
| * beaconing hasn't been configured yet | |
| */ | |
| case NL80211_IFTYPE_AP: | |
| /* | |
| * If the scan has been forced (and the driver supports | |
| * forcing), don't care about being beaconing already. | |
| * This will create problems to the attached stations (e.g. all | |
| * the frames sent while scanning on other channel will be | |
| * lost) | |
| */ | |
| if (sdata->u.ap.beacon && | |
| (!(wiphy->features & NL80211_FEATURE_AP_SCAN) || | |
| !(req->flags & NL80211_SCAN_FLAG_AP))) | |
| return -EOPNOTSUPP; | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| return ieee80211_request_scan(sdata, req); | |
| } | |
| static int | |
| ieee80211_sched_scan_start(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct cfg80211_sched_scan_request *req) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (!sdata->local->ops->sched_scan_start) | |
| return -EOPNOTSUPP; | |
| return ieee80211_request_sched_scan_start(sdata, req); | |
| } | |
| static int | |
| ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (!sdata->local->ops->sched_scan_stop) | |
| return -EOPNOTSUPP; | |
| return ieee80211_request_sched_scan_stop(sdata); | |
| } | |
| static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_auth_request *req) | |
| { | |
| return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req); | |
| } | |
| static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_assoc_request *req) | |
| { | |
| return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req); | |
| } | |
| static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_deauth_request *req) | |
| { | |
| return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev), req); | |
| } | |
| static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_disassoc_request *req) | |
| { | |
| return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev), req); | |
| } | |
| static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_ibss_params *params) | |
| { | |
| return ieee80211_ibss_join(IEEE80211_DEV_TO_SUB_IF(dev), params); | |
| } | |
| static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) | |
| { | |
| return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev)); | |
| } | |
| static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev, | |
| int rate[IEEE80211_NUM_BANDS]) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| memcpy(sdata->vif.bss_conf.mcast_rate, rate, | |
| sizeof(int) * IEEE80211_NUM_BANDS); | |
| return 0; | |
| } | |
| static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| int err; | |
| if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { | |
| err = drv_set_frag_threshold(local, wiphy->frag_threshold); | |
| if (err) | |
| return err; | |
| } | |
| if (changed & WIPHY_PARAM_COVERAGE_CLASS) { | |
| err = drv_set_coverage_class(local, wiphy->coverage_class); | |
| if (err) | |
| return err; | |
| } | |
| if (changed & WIPHY_PARAM_RTS_THRESHOLD) { | |
| err = drv_set_rts_threshold(local, wiphy->rts_threshold); | |
| if (err) | |
| return err; | |
| } | |
| if (changed & WIPHY_PARAM_RETRY_SHORT) { | |
| if (wiphy->retry_short > IEEE80211_MAX_TX_RETRY) | |
| return -EINVAL; | |
| local->hw.conf.short_frame_max_tx_count = wiphy->retry_short; | |
| } | |
| if (changed & WIPHY_PARAM_RETRY_LONG) { | |
| if (wiphy->retry_long > IEEE80211_MAX_TX_RETRY) | |
| return -EINVAL; | |
| local->hw.conf.long_frame_max_tx_count = wiphy->retry_long; | |
| } | |
| if (changed & | |
| (WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG)) | |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS); | |
| return 0; | |
| } | |
| static int ieee80211_set_tx_power(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| enum nl80211_tx_power_setting type, int mbm) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct ieee80211_sub_if_data *sdata; | |
| if (wdev) { | |
| sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| switch (type) { | |
| case NL80211_TX_POWER_AUTOMATIC: | |
| sdata->user_power_level = IEEE80211_UNSET_POWER_LEVEL; | |
| break; | |
| case NL80211_TX_POWER_LIMITED: | |
| case NL80211_TX_POWER_FIXED: | |
| if (mbm < 0 || (mbm % 100)) | |
| return -EOPNOTSUPP; | |
| sdata->user_power_level = MBM_TO_DBM(mbm); | |
| break; | |
| } | |
| ieee80211_recalc_txpower(sdata); | |
| return 0; | |
| } | |
| switch (type) { | |
| case NL80211_TX_POWER_AUTOMATIC: | |
| local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; | |
| break; | |
| case NL80211_TX_POWER_LIMITED: | |
| case NL80211_TX_POWER_FIXED: | |
| if (mbm < 0 || (mbm % 100)) | |
| return -EOPNOTSUPP; | |
| local->user_power_level = MBM_TO_DBM(mbm); | |
| break; | |
| } | |
| mutex_lock(&local->iflist_mtx); | |
| list_for_each_entry(sdata, &local->interfaces, list) | |
| sdata->user_power_level = local->user_power_level; | |
| list_for_each_entry(sdata, &local->interfaces, list) | |
| ieee80211_recalc_txpower(sdata); | |
| mutex_unlock(&local->iflist_mtx); | |
| return 0; | |
| } | |
| static int ieee80211_get_tx_power(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| int *dbm) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| if (!local->use_chanctx) | |
| *dbm = local->hw.conf.power_level; | |
| else | |
| *dbm = sdata->vif.bss_conf.txpower; | |
| return 0; | |
| } | |
| static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev, | |
| const u8 *addr) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| memcpy(&sdata->u.wds.remote_addr, addr, ETH_ALEN); | |
| return 0; | |
| } | |
| static void ieee80211_rfkill_poll(struct wiphy *wiphy) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| drv_rfkill_poll(local); | |
| } | |
| #ifdef CONFIG_NL80211_TESTMODE | |
| static int ieee80211_testmode_cmd(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| void *data, int len) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct ieee80211_vif *vif = NULL; | |
| if (!local->ops->testmode_cmd) | |
| return -EOPNOTSUPP; | |
| if (wdev) { | |
| struct ieee80211_sub_if_data *sdata; | |
| sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| if (sdata->flags & IEEE80211_SDATA_IN_DRIVER) | |
| vif = &sdata->vif; | |
| } | |
| return local->ops->testmode_cmd(&local->hw, vif, data, len); | |
| } | |
| static int ieee80211_testmode_dump(struct wiphy *wiphy, | |
| struct sk_buff *skb, | |
| struct netlink_callback *cb, | |
| void *data, int len) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| if (!local->ops->testmode_dump) | |
| return -EOPNOTSUPP; | |
| return local->ops->testmode_dump(&local->hw, skb, cb, data, len); | |
| } | |
| #endif | |
| int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata, | |
| enum ieee80211_smps_mode smps_mode) | |
| { | |
| const u8 *ap; | |
| enum ieee80211_smps_mode old_req; | |
| int err; | |
| lockdep_assert_held(&sdata->wdev.mtx); | |
| old_req = sdata->u.mgd.req_smps; | |
| sdata->u.mgd.req_smps = smps_mode; | |
| if (old_req == smps_mode && | |
| smps_mode != IEEE80211_SMPS_AUTOMATIC) | |
| return 0; | |
| /* | |
| * If not associated, or current association is not an HT | |
| * association, there's no need to do anything, just store | |
| * the new value until we associate. | |
| */ | |
| if (!sdata->u.mgd.associated || | |
| sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) | |
| return 0; | |
| ap = sdata->u.mgd.associated->bssid; | |
| if (smps_mode == IEEE80211_SMPS_AUTOMATIC) { | |
| if (sdata->u.mgd.powersave) | |
| smps_mode = IEEE80211_SMPS_DYNAMIC; | |
| else | |
| smps_mode = IEEE80211_SMPS_OFF; | |
| } | |
| /* send SM PS frame to AP */ | |
| err = ieee80211_send_smps_action(sdata, smps_mode, | |
| ap, ap); | |
| if (err) | |
| sdata->u.mgd.req_smps = old_req; | |
| return err; | |
| } | |
| static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, | |
| bool enabled, int timeout) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION && | |
| sdata->vif.type != NL80211_IFTYPE_MESH_POINT) | |
| return -EOPNOTSUPP; | |
| if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) | |
| return -EOPNOTSUPP; | |
| if (enabled == sdata->u.mgd.powersave && | |
| timeout == local->dynamic_ps_forced_timeout) | |
| return 0; | |
| sdata->u.mgd.powersave = enabled; | |
| local->dynamic_ps_forced_timeout = timeout; | |
| /* no change, but if automatic follow powersave */ | |
| sdata_lock(sdata); | |
| __ieee80211_request_smps(sdata, sdata->u.mgd.req_smps); | |
| sdata_unlock(sdata); | |
| if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) | |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | |
| ieee80211_recalc_ps(local, -1); | |
| ieee80211_recalc_ps_vif(sdata); | |
| return 0; | |
| } | |
| static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| s32 rssi_thold, u32 rssi_hyst) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_vif *vif = &sdata->vif; | |
| struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; | |
| if (rssi_thold == bss_conf->cqm_rssi_thold && | |
| rssi_hyst == bss_conf->cqm_rssi_hyst) | |
| return 0; | |
| bss_conf->cqm_rssi_thold = rssi_thold; | |
| bss_conf->cqm_rssi_hyst = rssi_hyst; | |
| /* tell the driver upon association, unless already associated */ | |
| if (sdata->u.mgd.associated && | |
| sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI) | |
| ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM); | |
| return 0; | |
| } | |
| static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| const u8 *addr, | |
| const struct cfg80211_bitrate_mask *mask) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| int i, ret; | |
| if (!ieee80211_sdata_running(sdata)) | |
| return -ENETDOWN; | |
| if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) { | |
| ret = drv_set_bitrate_mask(local, sdata, mask); | |
| if (ret) | |
| return ret; | |
| } | |
| for (i = 0; i < IEEE80211_NUM_BANDS; i++) { | |
| struct ieee80211_supported_band *sband = wiphy->bands[i]; | |
| int j; | |
| sdata->rc_rateidx_mask[i] = mask->control[i].legacy; | |
| memcpy(sdata->rc_rateidx_mcs_mask[i], mask->control[i].mcs, | |
| sizeof(mask->control[i].mcs)); | |
| sdata->rc_has_mcs_mask[i] = false; | |
| if (!sband) | |
| continue; | |
| for (j = 0; j < IEEE80211_HT_MCS_MASK_LEN; j++) | |
| if (~sdata->rc_rateidx_mcs_mask[i][j]) { | |
| sdata->rc_has_mcs_mask[i] = true; | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int ieee80211_start_roc_work(struct ieee80211_local *local, | |
| struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_channel *channel, | |
| unsigned int duration, u64 *cookie, | |
| struct sk_buff *txskb, | |
| enum ieee80211_roc_type type) | |
| { | |
| struct ieee80211_roc_work *roc, *tmp; | |
| bool queued = false; | |
| int ret; | |
| lockdep_assert_held(&local->mtx); | |
| if (local->use_chanctx && !local->ops->remain_on_channel) | |
| return -EOPNOTSUPP; | |
| roc = kzalloc(sizeof(*roc), GFP_KERNEL); | |
| if (!roc) | |
| return -ENOMEM; | |
| roc->chan = channel; | |
| roc->duration = duration; | |
| roc->req_duration = duration; | |
| roc->frame = txskb; | |
| roc->type = type; | |
| roc->mgmt_tx_cookie = (unsigned long)txskb; | |
| roc->sdata = sdata; | |
| INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work); | |
| INIT_LIST_HEAD(&roc->dependents); | |
| /* if there's one pending or we're scanning, queue this one */ | |
| if (!list_empty(&local->roc_list) || | |
| local->scanning || local->radar_detect_enabled) | |
| goto out_check_combine; | |
| /* if not HW assist, just queue & schedule work */ | |
| if (!local->ops->remain_on_channel) { | |
| ieee80211_queue_delayed_work(&local->hw, &roc->work, 0); | |
| goto out_queue; | |
| } | |
| /* otherwise actually kick it off here (for error handling) */ | |
| /* | |
| * If the duration is zero, then the driver | |
| * wouldn't actually do anything. Set it to | |
| * 10 for now. | |
| * | |
| * TODO: cancel the off-channel operation | |
| * when we get the SKB's TX status and | |
| * the wait time was zero before. | |
| */ | |
| if (!duration) | |
| duration = 10; | |
| ret = drv_remain_on_channel(local, sdata, channel, duration, type); | |
| if (ret) { | |
| kfree(roc); | |
| return ret; | |
| } | |
| roc->started = true; | |
| goto out_queue; | |
| out_check_combine: | |
| list_for_each_entry(tmp, &local->roc_list, list) { | |
| if (tmp->chan != channel || tmp->sdata != sdata) | |
| continue; | |
| /* | |
| * Extend this ROC if possible: | |
| * | |
| * If it hasn't started yet, just increase the duration | |
| * and add the new one to the list of dependents. | |
| * If the type of the new ROC has higher priority, modify the | |
| * type of the previous one to match that of the new one. | |
| */ | |
| if (!tmp->started) { | |
| list_add_tail(&roc->list, &tmp->dependents); | |
| tmp->duration = max(tmp->duration, roc->duration); | |
| tmp->type = max(tmp->type, roc->type); | |
| queued = true; | |
| break; | |
| } | |
| /* If it has already started, it's more difficult ... */ | |
| if (local->ops->remain_on_channel) { | |
| unsigned long j = jiffies; | |
| /* | |
| * In the offloaded ROC case, if it hasn't begun, add | |
| * this new one to the dependent list to be handled | |
| * when the master one begins. If it has begun, | |
| * check that there's still a minimum time left and | |
| * if so, start this one, transmitting the frame, but | |
| * add it to the list directly after this one with | |
| * a reduced time so we'll ask the driver to execute | |
| * it right after finishing the previous one, in the | |
| * hope that it'll also be executed right afterwards, | |
| * effectively extending the old one. | |
| * If there's no minimum time left, just add it to the | |
| * normal list. | |
| * TODO: the ROC type is ignored here, assuming that it | |
| * is better to immediately use the current ROC. | |
| */ | |
| if (!tmp->hw_begun) { | |
| list_add_tail(&roc->list, &tmp->dependents); | |
| queued = true; | |
| break; | |
| } | |
| if (time_before(j + IEEE80211_ROC_MIN_LEFT, | |
| tmp->hw_start_time + | |
| msecs_to_jiffies(tmp->duration))) { | |
| int new_dur; | |
| ieee80211_handle_roc_started(roc); | |
| new_dur = roc->duration - | |
| jiffies_to_msecs(tmp->hw_start_time + | |
| msecs_to_jiffies( | |
| tmp->duration) - | |
| j); | |
| if (new_dur > 0) { | |
| /* add right after tmp */ | |
| list_add(&roc->list, &tmp->list); | |
| } else { | |
| list_add_tail(&roc->list, | |
| &tmp->dependents); | |
| } | |
| queued = true; | |
| } | |
| } else if (del_timer_sync(&tmp->work.timer)) { | |
| unsigned long new_end; | |
| /* | |
| * In the software ROC case, cancel the timer, if | |
| * that fails then the finish work is already | |
| * queued/pending and thus we queue the new ROC | |
| * normally, if that succeeds then we can extend | |
| * the timer duration and TX the frame (if any.) | |
| */ | |
| list_add_tail(&roc->list, &tmp->dependents); | |
| queued = true; | |
| new_end = jiffies + msecs_to_jiffies(roc->duration); | |
| /* ok, it was started & we canceled timer */ | |
| if (time_after(new_end, tmp->work.timer.expires)) | |
| mod_timer(&tmp->work.timer, new_end); | |
| else | |
| add_timer(&tmp->work.timer); | |
| ieee80211_handle_roc_started(roc); | |
| } | |
| break; | |
| } | |
| out_queue: | |
| if (!queued) | |
| list_add_tail(&roc->list, &local->roc_list); | |
| /* | |
| * cookie is either the roc cookie (for normal roc) | |
| * or the SKB (for mgmt TX) | |
| */ | |
| if (!txskb) { | |
| /* local->mtx protects this */ | |
| local->roc_cookie_counter++; | |
| roc->cookie = local->roc_cookie_counter; | |
| /* wow, you wrapped 64 bits ... more likely a bug */ | |
| if (WARN_ON(roc->cookie == 0)) { | |
| roc->cookie = 1; | |
| local->roc_cookie_counter++; | |
| } | |
| *cookie = roc->cookie; | |
| } else { | |
| *cookie = (unsigned long)txskb; | |
| } | |
| return 0; | |
| } | |
| static int ieee80211_remain_on_channel(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| struct ieee80211_channel *chan, | |
| unsigned int duration, | |
| u64 *cookie) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| struct ieee80211_local *local = sdata->local; | |
| int ret; | |
| mutex_lock(&local->mtx); | |
| ret = ieee80211_start_roc_work(local, sdata, chan, | |
| duration, cookie, NULL, | |
| IEEE80211_ROC_TYPE_NORMAL); | |
| mutex_unlock(&local->mtx); | |
| return ret; | |
| } | |
| static int ieee80211_cancel_roc(struct ieee80211_local *local, | |
| u64 cookie, bool mgmt_tx) | |
| { | |
| struct ieee80211_roc_work *roc, *tmp, *found = NULL; | |
| int ret; | |
| mutex_lock(&local->mtx); | |
| list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { | |
| struct ieee80211_roc_work *dep, *tmp2; | |
| list_for_each_entry_safe(dep, tmp2, &roc->dependents, list) { | |
| if (!mgmt_tx && dep->cookie != cookie) | |
| continue; | |
| else if (mgmt_tx && dep->mgmt_tx_cookie != cookie) | |
| continue; | |
| /* found dependent item -- just remove it */ | |
| list_del(&dep->list); | |
| mutex_unlock(&local->mtx); | |
| ieee80211_roc_notify_destroy(dep, true); | |
| return 0; | |
| } | |
| if (!mgmt_tx && roc->cookie != cookie) | |
| continue; | |
| else if (mgmt_tx && roc->mgmt_tx_cookie != cookie) | |
| continue; | |
| found = roc; | |
| break; | |
| } | |
| if (!found) { | |
| mutex_unlock(&local->mtx); | |
| return -ENOENT; | |
| } | |
| /* | |
| * We found the item to cancel, so do that. Note that it | |
| * may have dependents, which we also cancel (and send | |
| * the expired signal for.) Not doing so would be quite | |
| * tricky here, but we may need to fix it later. | |
| */ | |
| if (local->ops->remain_on_channel) { | |
| if (found->started) { | |
| ret = drv_cancel_remain_on_channel(local); | |
| if (WARN_ON_ONCE(ret)) { | |
| mutex_unlock(&local->mtx); | |
| return ret; | |
| } | |
| } | |
| list_del(&found->list); | |
| if (found->started) | |
| ieee80211_start_next_roc(local); | |
| mutex_unlock(&local->mtx); | |
| ieee80211_roc_notify_destroy(found, true); | |
| } else { | |
| /* work may be pending so use it all the time */ | |
| found->abort = true; | |
| ieee80211_queue_delayed_work(&local->hw, &found->work, 0); | |
| mutex_unlock(&local->mtx); | |
| /* work will clean up etc */ | |
| flush_delayed_work(&found->work); | |
| WARN_ON(!found->to_be_freed); | |
| kfree(found); | |
| } | |
| return 0; | |
| } | |
| static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| u64 cookie) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| struct ieee80211_local *local = sdata->local; | |
| return ieee80211_cancel_roc(local, cookie, false); | |
| } | |
| static int ieee80211_start_radar_detection(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| unsigned long timeout; | |
| int err; | |
| if (!list_empty(&local->roc_list) || local->scanning) | |
| return -EBUSY; | |
| /* whatever, but channel contexts should not complain about that one */ | |
| sdata->smps_mode = IEEE80211_SMPS_OFF; | |
| sdata->needed_rx_chains = local->rx_chains; | |
| sdata->radar_required = true; | |
| mutex_lock(&local->iflist_mtx); | |
| err = ieee80211_vif_use_channel(sdata, chandef, | |
| IEEE80211_CHANCTX_SHARED); | |
| mutex_unlock(&local->iflist_mtx); | |
| if (err) | |
| return err; | |
| timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS); | |
| ieee80211_queue_delayed_work(&sdata->local->hw, | |
| &sdata->dfs_cac_timer_work, timeout); | |
| return 0; | |
| } | |
| static struct cfg80211_beacon_data * | |
| cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon) | |
| { | |
| struct cfg80211_beacon_data *new_beacon; | |
| u8 *pos; | |
| int len; | |
| len = beacon->head_len + beacon->tail_len + beacon->beacon_ies_len + | |
| beacon->proberesp_ies_len + beacon->assocresp_ies_len + | |
| beacon->probe_resp_len; | |
| new_beacon = kzalloc(sizeof(*new_beacon) + len, GFP_KERNEL); | |
| if (!new_beacon) | |
| return NULL; | |
| pos = (u8 *)(new_beacon + 1); | |
| if (beacon->head_len) { | |
| new_beacon->head_len = beacon->head_len; | |
| new_beacon->head = pos; | |
| memcpy(pos, beacon->head, beacon->head_len); | |
| pos += beacon->head_len; | |
| } | |
| if (beacon->tail_len) { | |
| new_beacon->tail_len = beacon->tail_len; | |
| new_beacon->tail = pos; | |
| memcpy(pos, beacon->tail, beacon->tail_len); | |
| pos += beacon->tail_len; | |
| } | |
| if (beacon->beacon_ies_len) { | |
| new_beacon->beacon_ies_len = beacon->beacon_ies_len; | |
| new_beacon->beacon_ies = pos; | |
| memcpy(pos, beacon->beacon_ies, beacon->beacon_ies_len); | |
| pos += beacon->beacon_ies_len; | |
| } | |
| if (beacon->proberesp_ies_len) { | |
| new_beacon->proberesp_ies_len = beacon->proberesp_ies_len; | |
| new_beacon->proberesp_ies = pos; | |
| memcpy(pos, beacon->proberesp_ies, beacon->proberesp_ies_len); | |
| pos += beacon->proberesp_ies_len; | |
| } | |
| if (beacon->assocresp_ies_len) { | |
| new_beacon->assocresp_ies_len = beacon->assocresp_ies_len; | |
| new_beacon->assocresp_ies = pos; | |
| memcpy(pos, beacon->assocresp_ies, beacon->assocresp_ies_len); | |
| pos += beacon->assocresp_ies_len; | |
| } | |
| if (beacon->probe_resp_len) { | |
| new_beacon->probe_resp_len = beacon->probe_resp_len; | |
| beacon->probe_resp = pos; | |
| memcpy(pos, beacon->probe_resp, beacon->probe_resp_len); | |
| pos += beacon->probe_resp_len; | |
| } | |
| return new_beacon; | |
| } | |
| void ieee80211_csa_finalize_work(struct work_struct *work) | |
| { | |
| struct ieee80211_sub_if_data *sdata = | |
| container_of(work, struct ieee80211_sub_if_data, | |
| csa_finalize_work); | |
| struct ieee80211_local *local = sdata->local; | |
| int err, changed; | |
| if (!ieee80211_sdata_running(sdata)) | |
| return; | |
| if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP)) | |
| return; | |
| sdata->radar_required = sdata->csa_radar_required; | |
| err = ieee80211_vif_change_channel(sdata, &local->csa_chandef, | |
| &changed); | |
| if (WARN_ON(err < 0)) | |
| return; | |
| err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon); | |
| if (err < 0) | |
| return; | |
| changed |= err; | |
| kfree(sdata->u.ap.next_beacon); | |
| sdata->u.ap.next_beacon = NULL; | |
| sdata->vif.csa_active = false; | |
| ieee80211_wake_queues_by_reason(&sdata->local->hw, | |
| IEEE80211_MAX_QUEUE_MAP, | |
| IEEE80211_QUEUE_STOP_REASON_CSA); | |
| ieee80211_bss_info_change_notify(sdata, changed); | |
| cfg80211_ch_switch_notify(sdata->dev, &local->csa_chandef); | |
| } | |
| static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, | |
| struct cfg80211_csa_settings *params) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| struct ieee80211_chanctx *chanctx; | |
| int err, num_chanctx; | |
| if (!list_empty(&local->roc_list) || local->scanning) | |
| return -EBUSY; | |
| if (sdata->wdev.cac_started) | |
| return -EBUSY; | |
| if (cfg80211_chandef_identical(¶ms->chandef, | |
| &sdata->vif.bss_conf.chandef)) | |
| return -EINVAL; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| rcu_read_unlock(); | |
| return -EBUSY; | |
| } | |
| /* don't handle for multi-VIF cases */ | |
| chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf); | |
| if (chanctx->refcount > 1) { | |
| rcu_read_unlock(); | |
| return -EBUSY; | |
| } | |
| num_chanctx = 0; | |
| list_for_each_entry_rcu(chanctx, &local->chanctx_list, list) | |
| num_chanctx++; | |
| rcu_read_unlock(); | |
| if (num_chanctx > 1) | |
| return -EBUSY; | |
| /* don't allow another channel switch if one is already active. */ | |
| if (sdata->vif.csa_active) | |
| return -EBUSY; | |
| /* only handle AP for now. */ | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP: | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| sdata->u.ap.next_beacon = cfg80211_beacon_dup(¶ms->beacon_after); | |
| if (!sdata->u.ap.next_beacon) | |
| return -ENOMEM; | |
| sdata->csa_counter_offset_beacon = params->counter_offset_beacon; | |
| sdata->csa_counter_offset_presp = params->counter_offset_presp; | |
| sdata->csa_radar_required = params->radar_required; | |
| if (params->block_tx) | |
| ieee80211_stop_queues_by_reason(&local->hw, | |
| IEEE80211_MAX_QUEUE_MAP, | |
| IEEE80211_QUEUE_STOP_REASON_CSA); | |
| err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa); | |
| if (err < 0) | |
| return err; | |
| local->csa_chandef = params->chandef; | |
| sdata->vif.csa_active = true; | |
| ieee80211_bss_info_change_notify(sdata, err); | |
| drv_channel_switch_beacon(sdata, ¶ms->chandef); | |
| return 0; | |
| } | |
| static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, | |
| struct ieee80211_channel *chan, bool offchan, | |
| unsigned int wait, const u8 *buf, size_t len, | |
| bool no_cck, bool dont_wait_for_ack, u64 *cookie) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| struct ieee80211_local *local = sdata->local; | |
| struct sk_buff *skb; | |
| struct sta_info *sta; | |
| const struct ieee80211_mgmt *mgmt = (void *)buf; | |
| bool need_offchan = false; | |
| u32 flags; | |
| int ret; | |
| if (dont_wait_for_ack) | |
| flags = IEEE80211_TX_CTL_NO_ACK; | |
| else | |
| flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX | | |
| IEEE80211_TX_CTL_REQ_TX_STATUS; | |
| if (no_cck) | |
| flags |= IEEE80211_TX_CTL_NO_CCK_RATE; | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_ADHOC: | |
| if (!sdata->vif.bss_conf.ibss_joined) | |
| need_offchan = true; | |
| /* fall through */ | |
| #ifdef CONFIG_MAC80211_MESH | |
| case NL80211_IFTYPE_MESH_POINT: | |
| if (ieee80211_vif_is_mesh(&sdata->vif) && | |
| !sdata->u.mesh.mesh_id_len) | |
| need_offchan = true; | |
| /* fall through */ | |
| #endif | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_AP_VLAN: | |
| case NL80211_IFTYPE_P2P_GO: | |
| if (sdata->vif.type != NL80211_IFTYPE_ADHOC && | |
| !ieee80211_vif_is_mesh(&sdata->vif) && | |
| !rcu_access_pointer(sdata->bss->beacon)) | |
| need_offchan = true; | |
| if (!ieee80211_is_action(mgmt->frame_control) || | |
| mgmt->u.action.category == WLAN_CATEGORY_PUBLIC || | |
| mgmt->u.action.category == WLAN_CATEGORY_SELF_PROTECTED) | |
| break; | |
| rcu_read_lock(); | |
| sta = sta_info_get(sdata, mgmt->da); | |
| rcu_read_unlock(); | |
| if (!sta) | |
| return -ENOLINK; | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_P2P_CLIENT: | |
| if (!sdata->u.mgd.associated) | |
| need_offchan = true; | |
| break; | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| need_offchan = true; | |
| break; | |
| default: | |
| return -EOPNOTSUPP; | |
| } | |
| /* configurations requiring offchan cannot work if no channel has been | |
| * specified | |
| */ | |
| if (need_offchan && !chan) | |
| return -EINVAL; | |
| mutex_lock(&local->mtx); | |
| /* Check if the operating channel is the requested channel */ | |
| if (!need_offchan) { | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (chanctx_conf) { | |
| need_offchan = chan && (chan != chanctx_conf->def.chan); | |
| } else if (!chan) { | |
| ret = -EINVAL; | |
| rcu_read_unlock(); | |
| goto out_unlock; | |
| } else { | |
| need_offchan = true; | |
| } | |
| rcu_read_unlock(); | |
| } | |
| if (need_offchan && !offchan) { | |
| ret = -EBUSY; | |
| goto out_unlock; | |
| } | |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + len); | |
| if (!skb) { | |
| ret = -ENOMEM; | |
| goto out_unlock; | |
| } | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| memcpy(skb_put(skb, len), buf, len); | |
| IEEE80211_SKB_CB(skb)->flags = flags; | |
| skb->dev = sdata->dev; | |
| if (!need_offchan) { | |
| *cookie = (unsigned long) skb; | |
| ieee80211_tx_skb(sdata, skb); | |
| ret = 0; | |
| goto out_unlock; | |
| } | |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN | | |
| IEEE80211_TX_INTFL_OFFCHAN_TX_OK; | |
| if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) | |
| IEEE80211_SKB_CB(skb)->hw_queue = | |
| local->hw.offchannel_tx_hw_queue; | |
| /* This will handle all kinds of coalescing and immediate TX */ | |
| ret = ieee80211_start_roc_work(local, sdata, chan, | |
| wait, cookie, skb, | |
| IEEE80211_ROC_TYPE_MGMT_TX); | |
| if (ret) | |
| kfree_skb(skb); | |
| out_unlock: | |
| mutex_unlock(&local->mtx); | |
| return ret; | |
| } | |
| static int ieee80211_mgmt_tx_cancel_wait(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| u64 cookie) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| return ieee80211_cancel_roc(local, cookie, true); | |
| } | |
| static void ieee80211_mgmt_frame_register(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| u16 frame_type, bool reg) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| switch (frame_type) { | |
| case IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ: | |
| if (reg) | |
| local->probe_req_reg++; | |
| else | |
| local->probe_req_reg--; | |
| if (!local->open_count) | |
| break; | |
| ieee80211_queue_work(&local->hw, &local->reconfig_filter); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| if (local->started) | |
| return -EOPNOTSUPP; | |
| return drv_set_antenna(local, tx_ant, rx_ant); | |
| } | |
| static int ieee80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| return drv_get_antenna(local, tx_ant, rx_ant); | |
| } | |
| static int ieee80211_set_ringparam(struct wiphy *wiphy, u32 tx, u32 rx) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| return drv_set_ringparam(local, tx, rx); | |
| } | |
| static void ieee80211_get_ringparam(struct wiphy *wiphy, | |
| u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| drv_get_ringparam(local, tx, tx_max, rx, rx_max); | |
| } | |
| static int ieee80211_set_rekey_data(struct wiphy *wiphy, | |
| struct net_device *dev, | |
| struct cfg80211_gtk_rekey_data *data) | |
| { | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (!local->ops->set_rekey_data) | |
| return -EOPNOTSUPP; | |
| drv_set_rekey_data(local, sdata, data); | |
| return 0; | |
| } | |
| static void ieee80211_tdls_add_ext_capab(struct sk_buff *skb) | |
| { | |
| u8 *pos = (void *)skb_put(skb, 7); | |
| *pos++ = WLAN_EID_EXT_CAPABILITY; | |
| *pos++ = 5; /* len */ | |
| *pos++ = 0x0; | |
| *pos++ = 0x0; | |
| *pos++ = 0x0; | |
| *pos++ = 0x0; | |
| *pos++ = WLAN_EXT_CAPA5_TDLS_ENABLED; | |
| } | |
| static u16 ieee80211_get_tdls_sta_capab(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| u16 capab; | |
| capab = 0; | |
| if (ieee80211_get_sdata_band(sdata) != IEEE80211_BAND_2GHZ) | |
| return capab; | |
| if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) | |
| capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; | |
| if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE)) | |
| capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; | |
| return capab; | |
| } | |
| static void ieee80211_tdls_add_link_ie(struct sk_buff *skb, u8 *src_addr, | |
| u8 *peer, u8 *bssid) | |
| { | |
| struct ieee80211_tdls_lnkie *lnkid; | |
| lnkid = (void *)skb_put(skb, sizeof(struct ieee80211_tdls_lnkie)); | |
| lnkid->ie_type = WLAN_EID_LINK_ID; | |
| lnkid->ie_len = sizeof(struct ieee80211_tdls_lnkie) - 2; | |
| memcpy(lnkid->bssid, bssid, ETH_ALEN); | |
| memcpy(lnkid->init_sta, src_addr, ETH_ALEN); | |
| memcpy(lnkid->resp_sta, peer, ETH_ALEN); | |
| } | |
| static int | |
| ieee80211_prep_tdls_encap_data(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *peer, u8 action_code, u8 dialog_token, | |
| u16 status_code, struct sk_buff *skb) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| enum ieee80211_band band = ieee80211_get_sdata_band(sdata); | |
| struct ieee80211_tdls_data *tf; | |
| tf = (void *)skb_put(skb, offsetof(struct ieee80211_tdls_data, u)); | |
| memcpy(tf->da, peer, ETH_ALEN); | |
| memcpy(tf->sa, sdata->vif.addr, ETH_ALEN); | |
| tf->ether_type = cpu_to_be16(ETH_P_TDLS); | |
| tf->payload_type = WLAN_TDLS_SNAP_RFTYPE; | |
| switch (action_code) { | |
| case WLAN_TDLS_SETUP_REQUEST: | |
| tf->category = WLAN_CATEGORY_TDLS; | |
| tf->action_code = WLAN_TDLS_SETUP_REQUEST; | |
| skb_put(skb, sizeof(tf->u.setup_req)); | |
| tf->u.setup_req.dialog_token = dialog_token; | |
| tf->u.setup_req.capability = | |
| cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata)); | |
| ieee80211_add_srates_ie(sdata, skb, false, band); | |
| ieee80211_add_ext_srates_ie(sdata, skb, false, band); | |
| ieee80211_tdls_add_ext_capab(skb); | |
| break; | |
| case WLAN_TDLS_SETUP_RESPONSE: | |
| tf->category = WLAN_CATEGORY_TDLS; | |
| tf->action_code = WLAN_TDLS_SETUP_RESPONSE; | |
| skb_put(skb, sizeof(tf->u.setup_resp)); | |
| tf->u.setup_resp.status_code = cpu_to_le16(status_code); | |
| tf->u.setup_resp.dialog_token = dialog_token; | |
| tf->u.setup_resp.capability = | |
| cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata)); | |
| ieee80211_add_srates_ie(sdata, skb, false, band); | |
| ieee80211_add_ext_srates_ie(sdata, skb, false, band); | |
| ieee80211_tdls_add_ext_capab(skb); | |
| break; | |
| case WLAN_TDLS_SETUP_CONFIRM: | |
| tf->category = WLAN_CATEGORY_TDLS; | |
| tf->action_code = WLAN_TDLS_SETUP_CONFIRM; | |
| skb_put(skb, sizeof(tf->u.setup_cfm)); | |
| tf->u.setup_cfm.status_code = cpu_to_le16(status_code); | |
| tf->u.setup_cfm.dialog_token = dialog_token; | |
| break; | |
| case WLAN_TDLS_TEARDOWN: | |
| tf->category = WLAN_CATEGORY_TDLS; | |
| tf->action_code = WLAN_TDLS_TEARDOWN; | |
| skb_put(skb, sizeof(tf->u.teardown)); | |
| tf->u.teardown.reason_code = cpu_to_le16(status_code); | |
| break; | |
| case WLAN_TDLS_DISCOVERY_REQUEST: | |
| tf->category = WLAN_CATEGORY_TDLS; | |
| tf->action_code = WLAN_TDLS_DISCOVERY_REQUEST; | |
| skb_put(skb, sizeof(tf->u.discover_req)); | |
| tf->u.discover_req.dialog_token = dialog_token; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int | |
| ieee80211_prep_tdls_direct(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *peer, u8 action_code, u8 dialog_token, | |
| u16 status_code, struct sk_buff *skb) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| enum ieee80211_band band = ieee80211_get_sdata_band(sdata); | |
| struct ieee80211_mgmt *mgmt; | |
| mgmt = (void *)skb_put(skb, 24); | |
| memset(mgmt, 0, 24); | |
| memcpy(mgmt->da, peer, ETH_ALEN); | |
| memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); | |
| memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN); | |
| mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_ACTION); | |
| switch (action_code) { | |
| case WLAN_PUB_ACTION_TDLS_DISCOVER_RES: | |
| skb_put(skb, 1 + sizeof(mgmt->u.action.u.tdls_discover_resp)); | |
| mgmt->u.action.category = WLAN_CATEGORY_PUBLIC; | |
| mgmt->u.action.u.tdls_discover_resp.action_code = | |
| WLAN_PUB_ACTION_TDLS_DISCOVER_RES; | |
| mgmt->u.action.u.tdls_discover_resp.dialog_token = | |
| dialog_token; | |
| mgmt->u.action.u.tdls_discover_resp.capability = | |
| cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata)); | |
| ieee80211_add_srates_ie(sdata, skb, false, band); | |
| ieee80211_add_ext_srates_ie(sdata, skb, false, band); | |
| ieee80211_tdls_add_ext_capab(skb); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int ieee80211_tdls_mgmt(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *peer, u8 action_code, u8 dialog_token, | |
| u16 status_code, const u8 *extra_ies, | |
| size_t extra_ies_len) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| struct sk_buff *skb = NULL; | |
| bool send_direct; | |
| int ret; | |
| if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)) | |
| return -ENOTSUPP; | |
| /* make sure we are in managed mode, and associated */ | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION || | |
| !sdata->u.mgd.associated) | |
| return -EINVAL; | |
| tdls_dbg(sdata, "TDLS mgmt action %d peer %pM\n", | |
| action_code, peer); | |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + | |
| max(sizeof(struct ieee80211_mgmt), | |
| sizeof(struct ieee80211_tdls_data)) + | |
| 50 + /* supported rates */ | |
| 7 + /* ext capab */ | |
| extra_ies_len + | |
| sizeof(struct ieee80211_tdls_lnkie)); | |
| if (!skb) | |
| return -ENOMEM; | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| switch (action_code) { | |
| case WLAN_TDLS_SETUP_REQUEST: | |
| case WLAN_TDLS_SETUP_RESPONSE: | |
| case WLAN_TDLS_SETUP_CONFIRM: | |
| case WLAN_TDLS_TEARDOWN: | |
| case WLAN_TDLS_DISCOVERY_REQUEST: | |
| ret = ieee80211_prep_tdls_encap_data(wiphy, dev, peer, | |
| action_code, dialog_token, | |
| status_code, skb); | |
| send_direct = false; | |
| break; | |
| case WLAN_PUB_ACTION_TDLS_DISCOVER_RES: | |
| ret = ieee80211_prep_tdls_direct(wiphy, dev, peer, action_code, | |
| dialog_token, status_code, | |
| skb); | |
| send_direct = true; | |
| break; | |
| default: | |
| ret = -ENOTSUPP; | |
| break; | |
| } | |
| if (ret < 0) | |
| goto fail; | |
| if (extra_ies_len) | |
| memcpy(skb_put(skb, extra_ies_len), extra_ies, extra_ies_len); | |
| /* the TDLS link IE is always added last */ | |
| switch (action_code) { | |
| case WLAN_TDLS_SETUP_REQUEST: | |
| case WLAN_TDLS_SETUP_CONFIRM: | |
| case WLAN_TDLS_TEARDOWN: | |
| case WLAN_TDLS_DISCOVERY_REQUEST: | |
| /* we are the initiator */ | |
| ieee80211_tdls_add_link_ie(skb, sdata->vif.addr, peer, | |
| sdata->u.mgd.bssid); | |
| break; | |
| case WLAN_TDLS_SETUP_RESPONSE: | |
| case WLAN_PUB_ACTION_TDLS_DISCOVER_RES: | |
| /* we are the responder */ | |
| ieee80211_tdls_add_link_ie(skb, peer, sdata->vif.addr, | |
| sdata->u.mgd.bssid); | |
| break; | |
| default: | |
| ret = -ENOTSUPP; | |
| goto fail; | |
| } | |
| if (send_direct) { | |
| ieee80211_tx_skb(sdata, skb); | |
| return 0; | |
| } | |
| /* | |
| * According to 802.11z: Setup req/resp are sent in AC_BK, otherwise | |
| * we should default to AC_VI. | |
| */ | |
| switch (action_code) { | |
| case WLAN_TDLS_SETUP_REQUEST: | |
| case WLAN_TDLS_SETUP_RESPONSE: | |
| skb_set_queue_mapping(skb, IEEE80211_AC_BK); | |
| skb->priority = 2; | |
| break; | |
| default: | |
| skb_set_queue_mapping(skb, IEEE80211_AC_VI); | |
| skb->priority = 5; | |
| break; | |
| } | |
| /* disable bottom halves when entering the Tx path */ | |
| local_bh_disable(); | |
| ret = ieee80211_subif_start_xmit(skb, dev); | |
| local_bh_enable(); | |
| return ret; | |
| fail: | |
| dev_kfree_skb(skb); | |
| return ret; | |
| } | |
| static int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev, | |
| u8 *peer, enum nl80211_tdls_operation oper) | |
| { | |
| struct sta_info *sta; | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| if (!(wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)) | |
| return -ENOTSUPP; | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return -EINVAL; | |
| tdls_dbg(sdata, "TDLS oper %d peer %pM\n", oper, peer); | |
| switch (oper) { | |
| case NL80211_TDLS_ENABLE_LINK: | |
| rcu_read_lock(); | |
| sta = sta_info_get(sdata, peer); | |
| if (!sta) { | |
| rcu_read_unlock(); | |
| return -ENOLINK; | |
| } | |
| set_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH); | |
| rcu_read_unlock(); | |
| break; | |
| case NL80211_TDLS_DISABLE_LINK: | |
| return sta_info_destroy_addr(sdata, peer); | |
| case NL80211_TDLS_TEARDOWN: | |
| case NL80211_TDLS_SETUP: | |
| case NL80211_TDLS_DISCOVERY_REQ: | |
| /* We don't support in-driver setup/teardown/discovery */ | |
| return -ENOTSUPP; | |
| default: | |
| return -ENOTSUPP; | |
| } | |
| return 0; | |
| } | |
| static int ieee80211_probe_client(struct wiphy *wiphy, struct net_device *dev, | |
| const u8 *peer, u64 *cookie) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_qos_hdr *nullfunc; | |
| struct sk_buff *skb; | |
| int size = sizeof(*nullfunc); | |
| __le16 fc; | |
| bool qos; | |
| struct ieee80211_tx_info *info; | |
| struct sta_info *sta; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| enum ieee80211_band band; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (WARN_ON(!chanctx_conf)) { | |
| rcu_read_unlock(); | |
| return -EINVAL; | |
| } | |
| band = chanctx_conf->def.chan->band; | |
| sta = sta_info_get_bss(sdata, peer); | |
| if (sta) { | |
| qos = test_sta_flag(sta, WLAN_STA_WME); | |
| } else { | |
| rcu_read_unlock(); | |
| return -ENOLINK; | |
| } | |
| if (qos) { | |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | |
| IEEE80211_STYPE_QOS_NULLFUNC | | |
| IEEE80211_FCTL_FROMDS); | |
| } else { | |
| size -= 2; | |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | |
| IEEE80211_STYPE_NULLFUNC | | |
| IEEE80211_FCTL_FROMDS); | |
| } | |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + size); | |
| if (!skb) { | |
| rcu_read_unlock(); | |
| return -ENOMEM; | |
| } | |
| skb->dev = dev; | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| nullfunc = (void *) skb_put(skb, size); | |
| nullfunc->frame_control = fc; | |
| nullfunc->duration_id = 0; | |
| memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); | |
| memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); | |
| memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN); | |
| nullfunc->seq_ctrl = 0; | |
| info = IEEE80211_SKB_CB(skb); | |
| info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | | |
| IEEE80211_TX_INTFL_NL80211_FRAME_TX; | |
| skb_set_queue_mapping(skb, IEEE80211_AC_VO); | |
| skb->priority = 7; | |
| if (qos) | |
| nullfunc->qos_ctrl = cpu_to_le16(7); | |
| local_bh_disable(); | |
| ieee80211_xmit(sdata, skb, band); | |
| local_bh_enable(); | |
| rcu_read_unlock(); | |
| *cookie = (unsigned long) skb; | |
| return 0; | |
| } | |
| static int ieee80211_cfg_get_channel(struct wiphy *wiphy, | |
| struct wireless_dev *wdev, | |
| struct cfg80211_chan_def *chandef) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | |
| struct ieee80211_local *local = wiphy_priv(wiphy); | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| int ret = -ENODATA; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (chanctx_conf) { | |
| *chandef = chanctx_conf->def; | |
| ret = 0; | |
| } else if (local->open_count > 0 && | |
| local->open_count == local->monitors && | |
| sdata->vif.type == NL80211_IFTYPE_MONITOR) { | |
| if (local->use_chanctx) | |
| *chandef = local->monitor_chandef; | |
| else | |
| *chandef = local->_oper_chandef; | |
| ret = 0; | |
| } | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| #ifdef CONFIG_PM | |
| static void ieee80211_set_wakeup(struct wiphy *wiphy, bool enabled) | |
| { | |
| drv_set_wakeup(wiphy_priv(wiphy), enabled); | |
| } | |
| #endif | |
| struct cfg80211_ops mac80211_config_ops = { | |
| .add_virtual_intf = ieee80211_add_iface, | |
| .del_virtual_intf = ieee80211_del_iface, | |
| .change_virtual_intf = ieee80211_change_iface, | |
| .start_p2p_device = ieee80211_start_p2p_device, | |
| .stop_p2p_device = ieee80211_stop_p2p_device, | |
| .add_key = ieee80211_add_key, | |
| .del_key = ieee80211_del_key, | |
| .get_key = ieee80211_get_key, | |
| .set_default_key = ieee80211_config_default_key, | |
| .set_default_mgmt_key = ieee80211_config_default_mgmt_key, | |
| .start_ap = ieee80211_start_ap, | |
| .change_beacon = ieee80211_change_beacon, | |
| .stop_ap = ieee80211_stop_ap, | |
| .add_station = ieee80211_add_station, | |
| .del_station = ieee80211_del_station, | |
| .change_station = ieee80211_change_station, | |
| .get_station = ieee80211_get_station, | |
| .dump_station = ieee80211_dump_station, | |
| .dump_survey = ieee80211_dump_survey, | |
| #ifdef CONFIG_MAC80211_MESH | |
| .add_mpath = ieee80211_add_mpath, | |
| .del_mpath = ieee80211_del_mpath, | |
| .change_mpath = ieee80211_change_mpath, | |
| .get_mpath = ieee80211_get_mpath, | |
| .dump_mpath = ieee80211_dump_mpath, | |
| .update_mesh_config = ieee80211_update_mesh_config, | |
| .get_mesh_config = ieee80211_get_mesh_config, | |
| .join_mesh = ieee80211_join_mesh, | |
| .leave_mesh = ieee80211_leave_mesh, | |
| #endif | |
| .change_bss = ieee80211_change_bss, | |
| .set_txq_params = ieee80211_set_txq_params, | |
| .set_monitor_channel = ieee80211_set_monitor_channel, | |
| .suspend = ieee80211_suspend, | |
| .resume = ieee80211_resume, | |
| .scan = ieee80211_scan, | |
| .sched_scan_start = ieee80211_sched_scan_start, | |
| .sched_scan_stop = ieee80211_sched_scan_stop, | |
| .auth = ieee80211_auth, | |
| .assoc = ieee80211_assoc, | |
| .deauth = ieee80211_deauth, | |
| .disassoc = ieee80211_disassoc, | |
| .join_ibss = ieee80211_join_ibss, | |
| .leave_ibss = ieee80211_leave_ibss, | |
| .set_mcast_rate = ieee80211_set_mcast_rate, | |
| .set_wiphy_params = ieee80211_set_wiphy_params, | |
| .set_tx_power = ieee80211_set_tx_power, | |
| .get_tx_power = ieee80211_get_tx_power, | |
| .set_wds_peer = ieee80211_set_wds_peer, | |
| .rfkill_poll = ieee80211_rfkill_poll, | |
| CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd) | |
| CFG80211_TESTMODE_DUMP(ieee80211_testmode_dump) | |
| .set_power_mgmt = ieee80211_set_power_mgmt, | |
| .set_bitrate_mask = ieee80211_set_bitrate_mask, | |
| .remain_on_channel = ieee80211_remain_on_channel, | |
| .cancel_remain_on_channel = ieee80211_cancel_remain_on_channel, | |
| .mgmt_tx = ieee80211_mgmt_tx, | |
| .mgmt_tx_cancel_wait = ieee80211_mgmt_tx_cancel_wait, | |
| .set_cqm_rssi_config = ieee80211_set_cqm_rssi_config, | |
| .mgmt_frame_register = ieee80211_mgmt_frame_register, | |
| .set_antenna = ieee80211_set_antenna, | |
| .get_antenna = ieee80211_get_antenna, | |
| .set_ringparam = ieee80211_set_ringparam, | |
| .get_ringparam = ieee80211_get_ringparam, | |
| .set_rekey_data = ieee80211_set_rekey_data, | |
| .tdls_oper = ieee80211_tdls_oper, | |
| .tdls_mgmt = ieee80211_tdls_mgmt, | |
| .probe_client = ieee80211_probe_client, | |
| .set_noack_map = ieee80211_set_noack_map, | |
| #ifdef CONFIG_PM | |
| .set_wakeup = ieee80211_set_wakeup, | |
| #endif | |
| .get_et_sset_count = ieee80211_get_et_sset_count, | |
| .get_et_stats = ieee80211_get_et_stats, | |
| .get_et_strings = ieee80211_get_et_strings, | |
| .get_channel = ieee80211_cfg_get_channel, | |
| .start_radar_detection = ieee80211_start_radar_detection, | |
| .channel_switch = ieee80211_channel_switch, | |
| }; |