arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts

/dts-v1/;

#include "tegra210-p2180.dtsi"
#include "tegra210-p2597.dtsi"

/ {
	model = "NVIDIA Jetson TX1 Developer Kit";
	compatible = "nvidia,p2371-2180", "nvidia,tegra210";

	pcie@1003000 {
		status = "okay";

		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
		hvddio-pex-supply = <&vdd_1v8>;
		dvddio-pex-supply = <&vdd_pex_1v05>;
		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
		hvdd-pex-pll-e-supply = <&vdd_1v8>;
		vddio-pex-ctl-supply = <&vdd_1v8>;

		pci@1,0 {
			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
			phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
			status = "okay";
		};

		pci@2,0 {
			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
			phy-names = "pcie-0";
			status = "okay";
		};
	};

	host1x@50000000 {
		dsi@54300000 {
			status = "okay";

			avdd-dsi-csi-supply = <&vdd_dsi_csi>;

			panel@0 {
				compatible = "auo,b080uan01";
				reg = <0>;

				enable-gpios = <&gpio TEGRA_GPIO(V, 2)
						GPIO_ACTIVE_HIGH>;
				power-supply = <&vdd_5v0_io>;
				backlight = <&backlight>;
			};
		};
	};

	i2c@7000c400 {
		backlight: backlight@2c {
			compatible = "ti,lp8557";
			reg = <0x2c>;

			dev-ctrl = /bits/ 8 <0x80>;
			init-brt = /bits/ 8 <0xff>;

			pwm-period = <29334>;

			pwms = <&pwm 0 29334>;
			pwm-names = "lp8557";

			/* 3 LED string */
			rom_14h {
				rom-addr = /bits/ 8 <0x14>;
				rom-val = /bits/ 8 <0x87>;
			};

			/* boost frequency 1 MHz */
			rom_13h {
				rom-addr = /bits/ 8 <0x13>;
				rom-val = /bits/ 8 <0x01>;
			};
		};
	};
};