blob: e15f9b19901f8568d91f232bc4dfb610370a4c92 [file] [log] [blame]
* Qualcomm PCI express root complex
- compatible:
Usage: required
Value type: <stringlist>
Definition: Value should contain
- "qcom,pcie-ipq8064" for ipq8064
- "qcom,pcie-apq8064" for apq8064
- "qcom,pcie-apq8084" for apq8084
- "qcom,pcie-msm8996" for msm8996 or apq8096
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: Register ranges as listed in the reg-names property
- reg-names:
Usage: required
Value type: <stringlist>
Definition: Must include the following entries
- "parf" Qualcomm specific registers
- "dbi" Designware PCIe registers
- "elbi" External local bus interface registers
- "config" PCIe configuration space
- device_type:
Usage: required
Value type: <string>
Definition: Should be "pci". As specified in designware-pcie.txt
- #address-cells:
Usage: required
Value type: <u32>
Definition: Should be 3. As specified in designware-pcie.txt
- #size-cells:
Usage: required
Value type: <u32>
Definition: Should be 2. As specified in designware-pcie.txt
- ranges:
Usage: required
Value type: <prop-encoded-array>
Definition: As specified in designware-pcie.txt
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: MSI interrupt
- interrupt-names:
Usage: required
Value type: <stringlist>
Definition: Should contain "msi"
- #interrupt-cells:
Usage: required
Value type: <u32>
Definition: Should be 1. As specified in designware-pcie.txt
- interrupt-map-mask:
Usage: required
Value type: <prop-encoded-array>
Definition: As specified in designware-pcie.txt
- interrupt-map:
Usage: required
Value type: <prop-encoded-array>
Definition: As specified in designware-pcie.txt
- clocks:
Usage: required
Value type: <prop-encoded-array>
Definition: List of phandle and clock specifier pairs as listed
in clock-names property
- clock-names:
Usage: required
Value type: <stringlist>
Definition: Should contain the following entries
- "iface" Configuration AHB clock
- clock-names:
Usage: required for ipq/apq8064
Value type: <stringlist>
Definition: Should contain the following entries
- "core" Clocks the pcie hw block
- "phy" Clocks the pcie PHY block
- clock-names:
Usage: required for apq8084
Value type: <stringlist>
Definition: Should contain the following entries
- "aux" Auxiliary (AUX) clock
- "bus_master" Master AXI clock
- "bus_slave" Slave AXI clock
- clock-names:
Usage: required for msm8996/apq8096
Value type: <stringlist>
Definition: Should contain the following entries
- "pipe" Pipe Clock driving internal logic
- "aux" Auxiliary (AUX) clock
- "cfg" Configuration clock
- "bus_master" Master AXI clock
- "bus_slave" Slave AXI clock
- resets:
Usage: required
Value type: <prop-encoded-array>
Definition: List of phandle and reset specifier pairs as listed
in reset-names property
- reset-names:
Usage: required for ipq/apq8064
Value type: <stringlist>
Definition: Should contain the following entries
- "axi" AXI reset
- "ahb" AHB reset
- "por" POR reset
- "pci" PCI reset
- "phy" PHY reset
- reset-names:
Usage: required for apq8084
Value type: <stringlist>
Definition: Should contain the following entries
- "core" Core reset
- power-domains:
Usage: required for apq8084 and msm8996/apq8096
Value type: <prop-encoded-array>
Definition: A phandle and power domain specifier pair to the
power domain which is responsible for collapsing
and restoring power to the peripheral
- vdda-supply:
Usage: required
Value type: <phandle>
Definition: A phandle to the core analog power supply
- vdda_phy-supply:
Usage: required for ipq/apq8064
Value type: <phandle>
Definition: A phandle to the analog power supply for PHY
- vdda_refclk-supply:
Usage: required for ipq/apq8064
Value type: <phandle>
Definition: A phandle to the analog power supply for IC which generates
reference clock
- phys:
Usage: required for apq8084
Value type: <phandle>
Definition: List of phandle(s) as listed in phy-names property
- phy-names:
Usage: required for apq8084
Value type: <stringlist>
Definition: Should contain "pciephy"
- <name>-gpios:
Usage: optional
Value type: <prop-encoded-array>
Definition: List of phandle and gpio specifier pairs. Should contain
- "perst-gpios" PCIe endpoint reset signal line
- "wake-gpios" PCIe endpoint wake signal line
* Example for ipq/apq8064
pcie@1b500000 {
compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
reg = <0x1b500000 0x1000
0x1b502000 0x80
0x1b600000 0x100
0x0ff00000 0x100000>;
reg-names = "dbi", "elbi", "parf", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc PCIE_A_CLK>,
<&gcc PCIE_H_CLK>,
<&gcc PCIE_PHY_CLK>;
clock-names = "core", "iface", "phy";
resets = <&gcc PCIE_ACLK_RESET>,
<&gcc PCIE_HCLK_RESET>,
<&gcc PCIE_POR_RESET>,
<&gcc PCIE_PCI_RESET>,
<&gcc PCIE_PHY_RESET>;
reset-names = "axi", "ahb", "por", "pci", "phy";
pinctrl-0 = <&pcie_pins_default>;
pinctrl-names = "default";
};
* Example for apq8084
pcie0@fc520000 {
compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
reg = <0xfc520000 0x2000>,
<0xff000000 0x1000>,
<0xff001000 0x1000>,
<0xff002000 0x2000>;
reg-names = "parf", "dbi", "elbi", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */
0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>;
clock-names = "iface", "master_bus", "slave_bus", "aux";
resets = <&gcc GCC_PCIE_0_BCR>;
reset-names = "core";
power-domains = <&gcc PCIE0_GDSC>;
vdda-supply = <&pma8084_l3>;
phys = <&pciephy0>;
phy-names = "pciephy";
perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins_default>;
pinctrl-names = "default";
};