| STMicroelectronics sti ASoC cards |
| |
| The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas |
| codec or external codecs. |
| |
| sti sound drivers allows to expose sti SoC audio interface through the |
| generic ASoC simple card. For details about sound card declaration please refer to |
| Documentation/devicetree/bindings/sound/simple-card.txt. |
| |
| 1) sti-uniperiph-dai: audio dai device. |
| --------------------------------------- |
| |
| Required properties: |
| - compatible: "st,stih407-uni-player-hdmi", "st,stih407-uni-player-pcm-out", |
| "st,stih407-uni-player-dac", "st,stih407-uni-player-spdif", |
| "st,stih407-uni-reader-pcm_in", "st,stih407-uni-reader-hdmi", |
| |
| - st,syscfg: phandle to boot-device system configuration registers |
| |
| - clock-names: name of the clocks listed in clocks property in the same order |
| |
| - reg: CPU DAI IP Base address and size entries, listed in same |
| order than the CPU_DAI properties. |
| |
| - reg-names: names of the mapped memory regions listed in regs property in |
| the same order. |
| |
| - interrupts: CPU_DAI interrupt line, listed in the same order than the |
| CPU_DAI properties. |
| |
| - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same |
| order than the CPU_DAI properties. |
| |
| - dma-names: identifier string for each DMA request line in the dmas property. |
| "tx" for "st,sti-uni-player" compatibility |
| "rx" for "st,sti-uni-reader" compatibility |
| |
| Required properties ("st,sti-uni-player" compatibility only): |
| - clocks: CPU_DAI IP clock source, listed in the same order than the |
| CPU_DAI properties. |
| |
| Optional properties: |
| - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for |
| external codecs connection. |
| |
| - pinctrl-names: should contain only one value - "default". |
| |
| - st,tdm-mode: to declare to set TDM mode for unireader and uniplayer IPs. |
| Only compartible with IPs in charge of the external I2S/TDM bus. |
| Should be declared depending on associated codec. |
| |
| Example: |
| |
| sti_uni_player1: sti-uni-player@0x8D81000 { |
| compatible = "st,stih407-uni-player-hdmi"; |
| status = "okay"; |
| #sound-dai-cells = <0>; |
| st,syscfg = <&syscfg_core>; |
| clocks = <&clk_s_d0_flexgen CLK_PCM_1>; |
| reg = <0x8D81000 0x158>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; |
| dmas = <&fdma0 3 0 1>; |
| dma-names = "tx"; |
| st,tdm-mode = <1>; |
| }; |
| |
| sti_uni_player2: sti-uni-player@0x8D82000 { |
| compatible = "st,stih407-uni-player-pcm-out"; |
| status = "okay"; |
| #sound-dai-cells = <0>; |
| st,syscfg = <&syscfg_core>; |
| clocks = <&clk_s_d0_flexgen CLK_PCM_2>; |
| reg = <0x8D82000 0x158>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; |
| dmas = <&fdma0 4 0 1>; |
| dma-names = "tx"; |
| }; |
| |
| sti_uni_player3: sti-uni-player@0x8D85000 { |
| compatible = "st,stih407-uni-player-spdif"; |
| status = "okay"; |
| #sound-dai-cells = <0>; |
| st,syscfg = <&syscfg_core>; |
| clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; |
| reg = <0x8D85000 0x158>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; |
| dmas = <&fdma0 7 0 1>; |
| dma-names = "tx"; |
| }; |
| |
| sti_uni_reader1: sti-uni-reader@0x8D84000 { |
| compatible = "st,stih407-uni-reader-hdmi"; |
| status = "disabled"; |
| #sound-dai-cells = <0>; |
| st,syscfg = <&syscfg_core>; |
| reg = <0x8D84000 0x158>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>; |
| dmas = <&fdma0 6 0 1>; |
| dma-names = "rx"; |
| }; |
| |
| 2) sti-sas-codec: internal audio codec IPs driver |
| ------------------------------------------------- |
| |
| Required properties: |
| - compatible: "st,sti<chip>-sas-codec" . |
| Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec" |
| |
| - st,syscfg: phandle to boot-device system configuration registers. |
| |
| - pinctrl-0: SPDIF PIO description. |
| |
| - pinctrl-names: should contain only one value - "default". |
| |
| Example: |
| sti_sas_codec: sti-sas-codec { |
| compatible = "st,stih407-sas-codec"; |
| #sound-dai-cells = <1>; |
| st,reg_audio = <&syscfg_core>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif_out >; |
| }; |
| |
| Example of audio card declaration: |
| sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "sti audio card"; |
| status = "okay"; |
| |
| simple-audio-card,dai-link@0 { |
| /* DAC */ |
| format = "i2s"; |
| dai-tdm-slot-width = <32>; |
| cpu { |
| sound-dai = <&sti_uni_player2>; |
| }; |
| |
| codec { |
| sound-dai = <&sti_sasg_codec 1>; |
| }; |
| }; |
| simple-audio-card,dai-link@1 { |
| /* SPDIF */ |
| format = "left_j"; |
| cpu { |
| sound-dai = <&sti_uni_player3>; |
| }; |
| |
| codec { |
| sound-dai = <&sti_sasg_codec 0>; |
| }; |
| }; |
| simple-audio-card,dai-link@2 { |
| /* TDM playback */ |
| format = "left_j"; |
| frame-inversion = <1>; |
| cpu { |
| sound-dai = <&sti_uni_player1>; |
| dai-tdm-slot-num = <16>; |
| dai-tdm-slot-width = <16>; |
| dai-tdm-slot-tx-mask = |
| <1 1 1 1 0 0 0 0 0 0 1 1 0 0 1 1>; |
| }; |
| |
| codec { |
| sound-dai = <&sti_sasg_codec 3>; |
| }; |
| }; |
| }; |