blob: 07a9713ae6a75757f43139a9a4b75c22c95f7304 [file] [log] [blame]
* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
sensors (THS) which are the analog circuits for measuring temperature (Tj)
inside the LSI.
Required properties:
- compatible : "renesas,<soctype>-thermal",
Examples with soctypes are:
- "renesas,r8a7795-thermal" (R-Car H3)
- "renesas,r8a7796-thermal" (R-Car M3-W)
- reg : Address ranges of the thermal registers. Each sensor
needs one address range. Sorting must be done in
increasing order according to datasheet, i.e.
TSC1, TSC2, ...
- clocks : Must contain a reference to the functional clock.
- #thermal-sensor-cells : must be <1>.
Optional properties:
- interrupts : interrupts routed to the TSC (3 for H3 and M3-W)
- power-domain : Must contain a reference to the power domain. This
property is mandatory if the thermal sensor instance
is part of a controllable power domain.
Example:
tsc: thermal@e6198000 {
compatible = "renesas,r8a7795-thermal";
reg = <0 0xe6198000 0 0x68>,
<0 0xe61a0000 0 0x5c>,
<0 0xe61a8000 0 0x5c>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#thermal-sensor-cells = <1>;
status = "okay";
};
thermal-zones {
sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
trips {
sensor1_crit: sensor1-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};