| /* |
| * Copyright (c) 2016, Mellanox Technologies. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/cpu.h> |
| #include <soc/nps/common.h> |
| |
| #define NPS_MSU_TICK_LOW 0xC8 |
| #define NPS_CLUSTER_OFFSET 8 |
| #define NPS_CLUSTER_NUM 16 |
| |
| /* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */ |
| static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly; |
| |
| static int __init nps_get_timer_clk(struct device_node *node, |
| unsigned long *timer_freq, |
| struct clk **clk) |
| { |
| int ret; |
| |
| *clk = of_clk_get(node, 0); |
| ret = PTR_ERR_OR_ZERO(*clk); |
| if (ret) { |
| pr_err("timer missing clk\n"); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(*clk); |
| if (ret) { |
| pr_err("Couldn't enable parent clk\n"); |
| clk_put(*clk); |
| return ret; |
| } |
| |
| *timer_freq = clk_get_rate(*clk); |
| if (!(*timer_freq)) { |
| pr_err("Couldn't get clk rate\n"); |
| clk_disable_unprepare(*clk); |
| clk_put(*clk); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static u64 nps_clksrc_read(struct clocksource *clksrc) |
| { |
| int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET; |
| |
| return (u64)ioread32be(nps_msu_reg_low_addr[cluster]); |
| } |
| |
| static int __init nps_setup_clocksource(struct device_node *node) |
| { |
| int ret, cluster; |
| struct clk *clk; |
| unsigned long nps_timer1_freq; |
| |
| |
| for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++) |
| nps_msu_reg_low_addr[cluster] = |
| nps_host_reg((cluster << NPS_CLUSTER_OFFSET), |
| NPS_MSU_BLKID, NPS_MSU_TICK_LOW); |
| |
| ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick", |
| nps_timer1_freq, 300, 32, nps_clksrc_read); |
| if (ret) { |
| pr_err("Couldn't register clock source.\n"); |
| clk_disable_unprepare(clk); |
| } |
| |
| return ret; |
| } |
| |
| CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer", |
| nps_setup_clocksource); |
| CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1", |
| nps_setup_clocksource); |
| |
| #ifdef CONFIG_EZNPS_MTM_EXT |
| #include <soc/nps/mtm.h> |
| |
| /* Timer related Aux registers */ |
| #define NPS_REG_TIMER0_TSI 0xFFFFF850 |
| #define NPS_REG_TIMER0_LIMIT 0x23 |
| #define NPS_REG_TIMER0_CTRL 0x22 |
| #define NPS_REG_TIMER0_CNT 0x21 |
| |
| /* |
| * Interrupt Enabled (IE) - re-arm the timer |
| * Not Halted (NH) - is cleared when working with JTAG (for debug) |
| */ |
| #define TIMER0_CTRL_IE BIT(0) |
| #define TIMER0_CTRL_NH BIT(1) |
| |
| static unsigned long nps_timer0_freq; |
| static unsigned long nps_timer0_irq; |
| |
| static void nps_clkevent_rm_thread(void) |
| { |
| int thread; |
| unsigned int cflags, enabled_threads; |
| |
| hw_schd_save(&cflags); |
| |
| enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI); |
| |
| /* remove thread from TSI1 */ |
| thread = read_aux_reg(CTOP_AUX_THREAD_ID); |
| enabled_threads &= ~(1 << thread); |
| write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads); |
| |
| /* Acknowledge and if needed re-arm the timer */ |
| if (!enabled_threads) |
| write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH); |
| else |
| write_aux_reg(NPS_REG_TIMER0_CTRL, |
| TIMER0_CTRL_IE | TIMER0_CTRL_NH); |
| |
| hw_schd_restore(cflags); |
| } |
| |
| static void nps_clkevent_add_thread(unsigned long delta) |
| { |
| int thread; |
| unsigned int cflags, enabled_threads; |
| |
| hw_schd_save(&cflags); |
| |
| /* add thread to TSI1 */ |
| thread = read_aux_reg(CTOP_AUX_THREAD_ID); |
| enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI); |
| enabled_threads |= (1 << thread); |
| write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads); |
| |
| /* set next timer event */ |
| write_aux_reg(NPS_REG_TIMER0_LIMIT, delta); |
| write_aux_reg(NPS_REG_TIMER0_CNT, 0); |
| write_aux_reg(NPS_REG_TIMER0_CTRL, |
| TIMER0_CTRL_IE | TIMER0_CTRL_NH); |
| |
| hw_schd_restore(cflags); |
| } |
| |
| /* |
| * Whenever anyone tries to change modes, we just mask interrupts |
| * and wait for the next event to get set. |
| */ |
| static int nps_clkevent_set_state(struct clock_event_device *dev) |
| { |
| nps_clkevent_rm_thread(); |
| disable_percpu_irq(nps_timer0_irq); |
| |
| return 0; |
| } |
| |
| static int nps_clkevent_set_next_event(unsigned long delta, |
| struct clock_event_device *dev) |
| { |
| nps_clkevent_add_thread(delta); |
| enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE); |
| |
| return 0; |
| } |
| |
| static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = { |
| .name = "NPS Timer0", |
| .features = CLOCK_EVT_FEAT_ONESHOT, |
| .rating = 300, |
| .set_next_event = nps_clkevent_set_next_event, |
| .set_state_oneshot = nps_clkevent_set_state, |
| .set_state_oneshot_stopped = nps_clkevent_set_state, |
| .set_state_shutdown = nps_clkevent_set_state, |
| .tick_resume = nps_clkevent_set_state, |
| }; |
| |
| static irqreturn_t timer_irq_handler(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = dev_id; |
| |
| nps_clkevent_rm_thread(); |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int nps_timer_starting_cpu(unsigned int cpu) |
| { |
| struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device); |
| |
| evt->cpumask = cpumask_of(smp_processor_id()); |
| |
| clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX); |
| enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE); |
| |
| return 0; |
| } |
| |
| static int nps_timer_dying_cpu(unsigned int cpu) |
| { |
| disable_percpu_irq(nps_timer0_irq); |
| return 0; |
| } |
| |
| static int __init nps_setup_clockevent(struct device_node *node) |
| { |
| struct clk *clk; |
| int ret; |
| |
| nps_timer0_irq = irq_of_parse_and_map(node, 0); |
| if (nps_timer0_irq <= 0) { |
| pr_err("clockevent: missing irq\n"); |
| return -EINVAL; |
| } |
| |
| ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk); |
| if (ret) |
| return ret; |
| |
| /* Needs apriori irq_set_percpu_devid() done in intc map function */ |
| ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler, |
| "Timer0 (per-cpu-tick)", |
| &nps_clockevent_device); |
| if (ret) { |
| pr_err("Couldn't request irq\n"); |
| clk_disable_unprepare(clk); |
| return ret; |
| } |
| |
| ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING, |
| "clockevents/nps:starting", |
| nps_timer_starting_cpu, |
| nps_timer_dying_cpu); |
| if (ret) { |
| pr_err("Failed to setup hotplug state\n"); |
| clk_disable_unprepare(clk); |
| free_percpu_irq(nps_timer0_irq, &nps_clockevent_device); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0", |
| nps_setup_clockevent); |
| #endif /* CONFIG_EZNPS_MTM_EXT */ |