blob: a10c6aae9ab98de7c752b05b9cc33059337b1410 [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2017 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <linuxwifi@intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2017 Intel Deutschland GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*****************************************************************************/
#ifndef __fw_api_rs_h__
#define __fw_api_rs_h__
#include "fw-api-mac.h"
/*
* These serve as indexes into
* struct iwl_rate_info fw_rate_idx_to_plcp[IWL_RATE_COUNT];
* TODO: avoid overlap between legacy and HT rates
*/
enum {
IWL_RATE_1M_INDEX = 0,
IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
IWL_RATE_2M_INDEX,
IWL_RATE_5M_INDEX,
IWL_RATE_11M_INDEX,
IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
IWL_RATE_6M_INDEX,
IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
IWL_RATE_MCS_0_INDEX = IWL_RATE_6M_INDEX,
IWL_FIRST_HT_RATE = IWL_RATE_MCS_0_INDEX,
IWL_FIRST_VHT_RATE = IWL_RATE_MCS_0_INDEX,
IWL_RATE_9M_INDEX,
IWL_RATE_12M_INDEX,
IWL_RATE_MCS_1_INDEX = IWL_RATE_12M_INDEX,
IWL_RATE_18M_INDEX,
IWL_RATE_MCS_2_INDEX = IWL_RATE_18M_INDEX,
IWL_RATE_24M_INDEX,
IWL_RATE_MCS_3_INDEX = IWL_RATE_24M_INDEX,
IWL_RATE_36M_INDEX,
IWL_RATE_MCS_4_INDEX = IWL_RATE_36M_INDEX,
IWL_RATE_48M_INDEX,
IWL_RATE_MCS_5_INDEX = IWL_RATE_48M_INDEX,
IWL_RATE_54M_INDEX,
IWL_RATE_MCS_6_INDEX = IWL_RATE_54M_INDEX,
IWL_LAST_NON_HT_RATE = IWL_RATE_54M_INDEX,
IWL_RATE_60M_INDEX,
IWL_RATE_MCS_7_INDEX = IWL_RATE_60M_INDEX,
IWL_LAST_HT_RATE = IWL_RATE_MCS_7_INDEX,
IWL_RATE_MCS_8_INDEX,
IWL_RATE_MCS_9_INDEX,
IWL_LAST_VHT_RATE = IWL_RATE_MCS_9_INDEX,
IWL_RATE_COUNT_LEGACY = IWL_LAST_NON_HT_RATE + 1,
IWL_RATE_COUNT = IWL_LAST_VHT_RATE + 1,
};
#define IWL_RATE_BIT_MSK(r) BIT(IWL_RATE_##r##M_INDEX)
/* fw API values for legacy bit rates, both OFDM and CCK */
enum {
IWL_RATE_6M_PLCP = 13,
IWL_RATE_9M_PLCP = 15,
IWL_RATE_12M_PLCP = 5,
IWL_RATE_18M_PLCP = 7,
IWL_RATE_24M_PLCP = 9,
IWL_RATE_36M_PLCP = 11,
IWL_RATE_48M_PLCP = 1,
IWL_RATE_54M_PLCP = 3,
IWL_RATE_1M_PLCP = 10,
IWL_RATE_2M_PLCP = 20,
IWL_RATE_5M_PLCP = 55,
IWL_RATE_11M_PLCP = 110,
IWL_RATE_INVM_PLCP = -1,
};
/*
* rate_n_flags bit fields
*
* The 32-bit value has different layouts in the low 8 bites depending on the
* format. There are three formats, HT, VHT and legacy (11abg, with subformats
* for CCK and OFDM).
*
* High-throughput (HT) rate format
* bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM)
* Very High-throughput (VHT) rate format
* bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM)
* Legacy OFDM rate format for bits 7:0
* bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM)
* Legacy CCK rate format for bits 7:0:
* bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK)
*/
/* Bit 8: (1) HT format, (0) legacy or VHT format */
#define RATE_MCS_HT_POS 8
#define RATE_MCS_HT_MSK (1 << RATE_MCS_HT_POS)
/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
#define RATE_MCS_CCK_POS 9
#define RATE_MCS_CCK_MSK (1 << RATE_MCS_CCK_POS)
/* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */
#define RATE_MCS_VHT_POS 26
#define RATE_MCS_VHT_MSK (1 << RATE_MCS_VHT_POS)
/*
* High-throughput (HT) rate format for bits 7:0
*
* 2-0: MCS rate base
* 0) 6 Mbps
* 1) 12 Mbps
* 2) 18 Mbps
* 3) 24 Mbps
* 4) 36 Mbps
* 5) 48 Mbps
* 6) 54 Mbps
* 7) 60 Mbps
* 4-3: 0) Single stream (SISO)
* 1) Dual stream (MIMO)
* 2) Triple stream (MIMO)
* 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
* (bits 7-6 are zero)
*
* Together the low 5 bits work out to the MCS index because we don't
* support MCSes above 15/23, and 0-7 have one stream, 8-15 have two
* streams and 16-23 have three streams. We could also support MCS 32
* which is the duplicate 20 MHz MCS (bit 5 set, all others zero.)
*/
#define RATE_HT_MCS_RATE_CODE_MSK 0x7
#define RATE_HT_MCS_NSS_POS 3
#define RATE_HT_MCS_NSS_MSK (3 << RATE_HT_MCS_NSS_POS)
/* Bit 10: (1) Use Green Field preamble */
#define RATE_HT_MCS_GF_POS 10
#define RATE_HT_MCS_GF_MSK (1 << RATE_HT_MCS_GF_POS)
#define RATE_HT_MCS_INDEX_MSK 0x3f
/*
* Very High-throughput (VHT) rate format for bits 7:0
*
* 3-0: VHT MCS (0-9)
* 5-4: number of streams - 1:
* 0) Single stream (SISO)
* 1) Dual stream (MIMO)
* 2) Triple stream (MIMO)
*/
/* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */
#define RATE_VHT_MCS_RATE_CODE_MSK 0xf
#define RATE_VHT_MCS_NSS_POS 4
#define RATE_VHT_MCS_NSS_MSK (3 << RATE_VHT_MCS_NSS_POS)
/*
* Legacy OFDM rate format for bits 7:0
*
* 3-0: 0xD) 6 Mbps
* 0xF) 9 Mbps
* 0x5) 12 Mbps
* 0x7) 18 Mbps
* 0x9) 24 Mbps
* 0xB) 36 Mbps
* 0x1) 48 Mbps
* 0x3) 54 Mbps
* (bits 7-4 are 0)
*
* Legacy CCK rate format for bits 7:0:
* bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK):
*
* 6-0: 10) 1 Mbps
* 20) 2 Mbps
* 55) 5.5 Mbps
* 110) 11 Mbps
* (bit 7 is 0)
*/
#define RATE_LEGACY_RATE_MSK 0xff
/* Bit 10 - OFDM HE */
#define RATE_MCS_OFDM_HE_POS 10
#define RATE_MCS_OFDM_HE_MSK BIT(RATE_MCS_OFDM_HE_POS)
/*
* Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz
* 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT
*/
#define RATE_MCS_CHAN_WIDTH_POS 11
#define RATE_MCS_CHAN_WIDTH_MSK (3 << RATE_MCS_CHAN_WIDTH_POS)
#define RATE_MCS_CHAN_WIDTH_20 (0 << RATE_MCS_CHAN_WIDTH_POS)
#define RATE_MCS_CHAN_WIDTH_40 (1 << RATE_MCS_CHAN_WIDTH_POS)
#define RATE_MCS_CHAN_WIDTH_80 (2 << RATE_MCS_CHAN_WIDTH_POS)
#define RATE_MCS_CHAN_WIDTH_160 (3 << RATE_MCS_CHAN_WIDTH_POS)
/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
#define RATE_MCS_SGI_POS 13
#define RATE_MCS_SGI_MSK (1 << RATE_MCS_SGI_POS)
/* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */
#define RATE_MCS_ANT_POS 14
#define RATE_MCS_ANT_A_MSK (1 << RATE_MCS_ANT_POS)
#define RATE_MCS_ANT_B_MSK (2 << RATE_MCS_ANT_POS)
#define RATE_MCS_ANT_C_MSK (4 << RATE_MCS_ANT_POS)
#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | \
RATE_MCS_ANT_B_MSK)
#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | \
RATE_MCS_ANT_C_MSK)
#define RATE_MCS_ANT_MSK RATE_MCS_ANT_ABC_MSK
#define RATE_MCS_ANT_NUM 3
/* Bit 17: (0) SS, (1) SS*2 */
#define RATE_MCS_STBC_POS 17
#define RATE_MCS_STBC_MSK BIT(RATE_MCS_STBC_POS)
/* Bit 18: OFDM-HE dual carrier mode */
#define RATE_HE_DUAL_CARRIER_MODE 18
#define RATE_HE_DUAL_CARRIER_MODE_MSK BIT(RATE_HE_DUAL_CARRIER_MODE)
/* Bit 19: (0) Beamforming is off, (1) Beamforming is on */
#define RATE_MCS_BF_POS 19
#define RATE_MCS_BF_MSK (1 << RATE_MCS_BF_POS)
/*
* Bit 20-21: HE guard interval and LTF type.
* (0) 1xLTF+1.6us, (1) 2xLTF+0.8us,
* (2) 2xLTF+1.6us, (3) 4xLTF+3.2us
*/
#define RATE_MCS_HE_GI_LTF_POS 20
#define RATE_MCS_HE_GI_LTF_MSK (3 << RATE_MCS_HE_GI_LTF_POS)
/* Bit 22-23: HE type. (0) SU, (1) SU_EXT, (2) MU, (3) trigger based */
#define RATE_MCS_HE_TYPE_POS 22
#define RATE_MCS_HE_TYPE_MSK (3 << RATE_MCS_HE_TYPE_POS)
/* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */
#define RATE_MCS_DUP_POS 24
#define RATE_MCS_DUP_MSK (3 << RATE_MCS_DUP_POS)
/* Bit 27: (1) LDPC enabled, (0) LDPC disabled */
#define RATE_MCS_LDPC_POS 27
#define RATE_MCS_LDPC_MSK (1 << RATE_MCS_LDPC_POS)
/* Link Quality definitions */
/* # entries in rate scale table to support Tx retries */
#define LQ_MAX_RETRY_NUM 16
/* Link quality command flags bit fields */
/* Bit 0: (0) Don't use RTS (1) Use RTS */
#define LQ_FLAG_USE_RTS_POS 0
#define LQ_FLAG_USE_RTS_MSK (1 << LQ_FLAG_USE_RTS_POS)
/* Bit 1-3: LQ command color. Used to match responses to LQ commands */
#define LQ_FLAG_COLOR_POS 1
#define LQ_FLAG_COLOR_MSK (7 << LQ_FLAG_COLOR_POS)
#define LQ_FLAG_COLOR_GET(_f) (((_f) & LQ_FLAG_COLOR_MSK) >>\
LQ_FLAG_COLOR_POS)
#define LQ_FLAGS_COLOR_INC(_c) ((((_c) + 1) << LQ_FLAG_COLOR_POS) &\
LQ_FLAG_COLOR_MSK)
#define LQ_FLAG_COLOR_SET(_f, _c) ((_c) | ((_f) & ~LQ_FLAG_COLOR_MSK))
/* Bit 4-5: Tx RTS BW Signalling
* (0) No RTS BW signalling
* (1) Static BW signalling
* (2) Dynamic BW signalling
*/
#define LQ_FLAG_RTS_BW_SIG_POS 4
#define LQ_FLAG_RTS_BW_SIG_NONE (0 << LQ_FLAG_RTS_BW_SIG_POS)
#define LQ_FLAG_RTS_BW_SIG_STATIC (1 << LQ_FLAG_RTS_BW_SIG_POS)
#define LQ_FLAG_RTS_BW_SIG_DYNAMIC (2 << LQ_FLAG_RTS_BW_SIG_POS)
/* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection
* Dyanmic BW selection allows Tx with narrower BW then requested in rates
*/
#define LQ_FLAG_DYNAMIC_BW_POS 6
#define LQ_FLAG_DYNAMIC_BW_MSK (1 << LQ_FLAG_DYNAMIC_BW_POS)
/* Single Stream Tx Parameters (lq_cmd->ss_params)
* Flags to control a smart FW decision about whether BFER/STBC/SISO will be
* used for single stream Tx.
*/
/* Bit 0-1: Max STBC streams allowed. Can be 0-3.
* (0) - No STBC allowed
* (1) - 2x1 STBC allowed (HT/VHT)
* (2) - 4x2 STBC allowed (HT/VHT)
* (3) - 3x2 STBC allowed (HT only)
* All our chips are at most 2 antennas so only (1) is valid for now.
*/
#define LQ_SS_STBC_ALLOWED_POS 0
#define LQ_SS_STBC_ALLOWED_MSK (3 << LQ_SS_STBC_ALLOWED_MSK)
/* 2x1 STBC is allowed */
#define LQ_SS_STBC_1SS_ALLOWED (1 << LQ_SS_STBC_ALLOWED_POS)
/* Bit 2: Beamformer (VHT only) is allowed */
#define LQ_SS_BFER_ALLOWED_POS 2
#define LQ_SS_BFER_ALLOWED (1 << LQ_SS_BFER_ALLOWED_POS)
/* Bit 3: Force BFER or STBC for testing
* If this is set:
* If BFER is allowed then force the ucode to choose BFER else
* If STBC is allowed then force the ucode to choose STBC over SISO
*/
#define LQ_SS_FORCE_POS 3
#define LQ_SS_FORCE (1 << LQ_SS_FORCE_POS)
/* Bit 31: ss_params field is valid. Used for FW backward compatibility
* with other drivers which don't support the ss_params API yet
*/
#define LQ_SS_PARAMS_VALID_POS 31
#define LQ_SS_PARAMS_VALID (1 << LQ_SS_PARAMS_VALID_POS)
/**
* struct iwl_lq_cmd - link quality command
* @sta_id: station to update
* @control: not used
* @flags: combination of LQ_FLAG_*
* @mimo_delim: the first SISO index in rs_table, which separates MIMO
* and SISO rates
* @single_stream_ant_msk: best antenna for SISO (can be dual in CDD).
* Should be ANT_[ABC]
* @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC]
* @initial_rate_index: first index from rs_table per AC category
* @agg_time_limit: aggregation max time threshold in usec/100, meaning
* value of 100 is one usec. Range is 100 to 8000
* @agg_disable_start_th: try-count threshold for starting aggregation.
* If a frame has higher try-count, it should not be selected for
* starting an aggregation sequence.
* @agg_frame_cnt_limit: max frame count in an aggregation.
* 0: no limit
* 1: no aggregation (one frame per aggregation)
* 2 - 0x3f: maximal number of frames (up to 3f == 63)
* @rs_table: array of rates for each TX try, each is rate_n_flags,
* meaning it is a combination of RATE_MCS_* and IWL_RATE_*_PLCP
* @ss_params: single stream features. declare whether STBC or BFER are allowed.
*/
struct iwl_lq_cmd {
u8 sta_id;
u8 reduced_tpc;
u16 control;
/* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */
u8 flags;
u8 mimo_delim;
u8 single_stream_ant_msk;
u8 dual_stream_ant_msk;
u8 initial_rate_index[AC_NUM];
/* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */
__le16 agg_time_limit;
u8 agg_disable_start_th;
u8 agg_frame_cnt_limit;
__le32 reserved2;
__le32 rs_table[LQ_MAX_RETRY_NUM];
__le32 ss_params;
}; /* LINK_QUALITY_CMD_API_S_VER_1 */
#endif /* __fw_api_rs_h__ */