|  | /* | 
|  | * Clocksource driver for NXP LPC32xx/18xx/43xx timer | 
|  | * | 
|  | * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> | 
|  | * | 
|  | * Based on: | 
|  | * time-efm32 Copyright (C) 2013 Pengutronix | 
|  | * mach-lpc32xx/timer.c Copyright (C) 2009 - 2010 NXP Semiconductors | 
|  | * | 
|  | * This file is licensed under the terms of the GNU General Public | 
|  | * License version 2. This program is licensed "as is" without any | 
|  | * warranty of any kind, whether express or implied. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) "%s: " fmt, __func__ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/clockchips.h> | 
|  | #include <linux/clocksource.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/sched_clock.h> | 
|  |  | 
|  | #define LPC32XX_TIMER_IR		0x000 | 
|  | #define  LPC32XX_TIMER_IR_MR0INT	BIT(0) | 
|  | #define LPC32XX_TIMER_TCR		0x004 | 
|  | #define  LPC32XX_TIMER_TCR_CEN		BIT(0) | 
|  | #define  LPC32XX_TIMER_TCR_CRST		BIT(1) | 
|  | #define LPC32XX_TIMER_TC		0x008 | 
|  | #define LPC32XX_TIMER_PR		0x00c | 
|  | #define LPC32XX_TIMER_MCR		0x014 | 
|  | #define  LPC32XX_TIMER_MCR_MR0I		BIT(0) | 
|  | #define  LPC32XX_TIMER_MCR_MR0R		BIT(1) | 
|  | #define  LPC32XX_TIMER_MCR_MR0S		BIT(2) | 
|  | #define LPC32XX_TIMER_MR0		0x018 | 
|  | #define LPC32XX_TIMER_CTCR		0x070 | 
|  |  | 
|  | struct lpc32xx_clock_event_ddata { | 
|  | struct clock_event_device evtdev; | 
|  | void __iomem *base; | 
|  | u32 ticks_per_jiffy; | 
|  | }; | 
|  |  | 
|  | /* Needed for the sched clock */ | 
|  | static void __iomem *clocksource_timer_counter; | 
|  |  | 
|  | static u64 notrace lpc32xx_read_sched_clock(void) | 
|  | { | 
|  | return readl(clocksource_timer_counter); | 
|  | } | 
|  |  | 
|  | static unsigned long lpc32xx_delay_timer_read(void) | 
|  | { | 
|  | return readl(clocksource_timer_counter); | 
|  | } | 
|  |  | 
|  | static struct delay_timer lpc32xx_delay_timer = { | 
|  | .read_current_timer = lpc32xx_delay_timer_read, | 
|  | }; | 
|  |  | 
|  | static int lpc32xx_clkevt_next_event(unsigned long delta, | 
|  | struct clock_event_device *evtdev) | 
|  | { | 
|  | struct lpc32xx_clock_event_ddata *ddata = | 
|  | container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); | 
|  |  | 
|  | /* | 
|  | * Place timer in reset and program the delta in the match | 
|  | * channel 0 (MR0). When the timer counter matches the value | 
|  | * in MR0 register the match will trigger an interrupt. | 
|  | * After setup the timer is released from reset and enabled. | 
|  | */ | 
|  | writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR); | 
|  | writel_relaxed(delta, ddata->base + LPC32XX_TIMER_MR0); | 
|  | writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lpc32xx_clkevt_shutdown(struct clock_event_device *evtdev) | 
|  | { | 
|  | struct lpc32xx_clock_event_ddata *ddata = | 
|  | container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); | 
|  |  | 
|  | /* Disable the timer */ | 
|  | writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lpc32xx_clkevt_oneshot(struct clock_event_device *evtdev) | 
|  | { | 
|  | struct lpc32xx_clock_event_ddata *ddata = | 
|  | container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); | 
|  |  | 
|  | /* | 
|  | * When using oneshot, we must also disable the timer | 
|  | * to wait for the first call to set_next_event(). | 
|  | */ | 
|  | writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR); | 
|  |  | 
|  | /* Enable interrupt, reset on match and stop on match (MCR). */ | 
|  | writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R | | 
|  | LPC32XX_TIMER_MCR_MR0S, ddata->base + LPC32XX_TIMER_MCR); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lpc32xx_clkevt_periodic(struct clock_event_device *evtdev) | 
|  | { | 
|  | struct lpc32xx_clock_event_ddata *ddata = | 
|  | container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); | 
|  |  | 
|  | /* Enable interrupt and reset on match. */ | 
|  | writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R, | 
|  | ddata->base + LPC32XX_TIMER_MCR); | 
|  |  | 
|  | /* | 
|  | * Place timer in reset and program the delta in the match | 
|  | * channel 0 (MR0). | 
|  | */ | 
|  | writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR); | 
|  | writel_relaxed(ddata->ticks_per_jiffy, ddata->base + LPC32XX_TIMER_MR0); | 
|  | writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static irqreturn_t lpc32xx_clock_event_handler(int irq, void *dev_id) | 
|  | { | 
|  | struct lpc32xx_clock_event_ddata *ddata = dev_id; | 
|  |  | 
|  | /* Clear match on channel 0 */ | 
|  | writel_relaxed(LPC32XX_TIMER_IR_MR0INT, ddata->base + LPC32XX_TIMER_IR); | 
|  |  | 
|  | ddata->evtdev.event_handler(&ddata->evtdev); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static struct lpc32xx_clock_event_ddata lpc32xx_clk_event_ddata = { | 
|  | .evtdev = { | 
|  | .name			= "lpc3220 clockevent", | 
|  | .features		= CLOCK_EVT_FEAT_ONESHOT | | 
|  | CLOCK_EVT_FEAT_PERIODIC, | 
|  | .rating			= 300, | 
|  | .set_next_event		= lpc32xx_clkevt_next_event, | 
|  | .set_state_shutdown	= lpc32xx_clkevt_shutdown, | 
|  | .set_state_oneshot	= lpc32xx_clkevt_oneshot, | 
|  | .set_state_periodic	= lpc32xx_clkevt_periodic, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init lpc32xx_clocksource_init(struct device_node *np) | 
|  | { | 
|  | void __iomem *base; | 
|  | unsigned long rate; | 
|  | struct clk *clk; | 
|  | int ret; | 
|  |  | 
|  | clk = of_clk_get_by_name(np, "timerclk"); | 
|  | if (IS_ERR(clk)) { | 
|  | pr_err("clock get failed (%ld)\n", PTR_ERR(clk)); | 
|  | return PTR_ERR(clk); | 
|  | } | 
|  |  | 
|  | ret = clk_prepare_enable(clk); | 
|  | if (ret) { | 
|  | pr_err("clock enable failed (%d)\n", ret); | 
|  | goto err_clk_enable; | 
|  | } | 
|  |  | 
|  | base = of_iomap(np, 0); | 
|  | if (!base) { | 
|  | pr_err("unable to map registers\n"); | 
|  | ret = -EADDRNOTAVAIL; | 
|  | goto err_iomap; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Disable and reset timer then set it to free running timer | 
|  | * mode (CTCR) with no prescaler (PR) or match operations (MCR). | 
|  | * After setup the timer is released from reset and enabled. | 
|  | */ | 
|  | writel_relaxed(LPC32XX_TIMER_TCR_CRST, base + LPC32XX_TIMER_TCR); | 
|  | writel_relaxed(0, base + LPC32XX_TIMER_PR); | 
|  | writel_relaxed(0, base + LPC32XX_TIMER_MCR); | 
|  | writel_relaxed(0, base + LPC32XX_TIMER_CTCR); | 
|  | writel_relaxed(LPC32XX_TIMER_TCR_CEN, base + LPC32XX_TIMER_TCR); | 
|  |  | 
|  | rate = clk_get_rate(clk); | 
|  | ret = clocksource_mmio_init(base + LPC32XX_TIMER_TC, "lpc3220 timer", | 
|  | rate, 300, 32, clocksource_mmio_readl_up); | 
|  | if (ret) { | 
|  | pr_err("failed to init clocksource (%d)\n", ret); | 
|  | goto err_clocksource_init; | 
|  | } | 
|  |  | 
|  | clocksource_timer_counter = base + LPC32XX_TIMER_TC; | 
|  | lpc32xx_delay_timer.freq = rate; | 
|  | register_current_timer_delay(&lpc32xx_delay_timer); | 
|  | sched_clock_register(lpc32xx_read_sched_clock, 32, rate); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_clocksource_init: | 
|  | iounmap(base); | 
|  | err_iomap: | 
|  | clk_disable_unprepare(clk); | 
|  | err_clk_enable: | 
|  | clk_put(clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __init lpc32xx_clockevent_init(struct device_node *np) | 
|  | { | 
|  | void __iomem *base; | 
|  | unsigned long rate; | 
|  | struct clk *clk; | 
|  | int ret, irq; | 
|  |  | 
|  | clk = of_clk_get_by_name(np, "timerclk"); | 
|  | if (IS_ERR(clk)) { | 
|  | pr_err("clock get failed (%ld)\n", PTR_ERR(clk)); | 
|  | return PTR_ERR(clk); | 
|  | } | 
|  |  | 
|  | ret = clk_prepare_enable(clk); | 
|  | if (ret) { | 
|  | pr_err("clock enable failed (%d)\n", ret); | 
|  | goto err_clk_enable; | 
|  | } | 
|  |  | 
|  | base = of_iomap(np, 0); | 
|  | if (!base) { | 
|  | pr_err("unable to map registers\n"); | 
|  | ret = -EADDRNOTAVAIL; | 
|  | goto err_iomap; | 
|  | } | 
|  |  | 
|  | irq = irq_of_parse_and_map(np, 0); | 
|  | if (!irq) { | 
|  | pr_err("get irq failed\n"); | 
|  | ret = -ENOENT; | 
|  | goto err_irq; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Disable timer and clear any pending interrupt (IR) on match | 
|  | * channel 0 (MR0). Clear the prescaler as it's not used. | 
|  | */ | 
|  | writel_relaxed(0, base + LPC32XX_TIMER_TCR); | 
|  | writel_relaxed(0, base + LPC32XX_TIMER_PR); | 
|  | writel_relaxed(0, base + LPC32XX_TIMER_CTCR); | 
|  | writel_relaxed(LPC32XX_TIMER_IR_MR0INT, base + LPC32XX_TIMER_IR); | 
|  |  | 
|  | rate = clk_get_rate(clk); | 
|  | lpc32xx_clk_event_ddata.base = base; | 
|  | lpc32xx_clk_event_ddata.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ); | 
|  | clockevents_config_and_register(&lpc32xx_clk_event_ddata.evtdev, | 
|  | rate, 1, -1); | 
|  |  | 
|  | ret = request_irq(irq, lpc32xx_clock_event_handler, | 
|  | IRQF_TIMER | IRQF_IRQPOLL, "lpc3220 clockevent", | 
|  | &lpc32xx_clk_event_ddata); | 
|  | if (ret) { | 
|  | pr_err("request irq failed\n"); | 
|  | goto err_irq; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_irq: | 
|  | iounmap(base); | 
|  | err_iomap: | 
|  | clk_disable_unprepare(clk); | 
|  | err_clk_enable: | 
|  | clk_put(clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function asserts that we have exactly one clocksource and one | 
|  | * clock_event_device in the end. | 
|  | */ | 
|  | static void __init lpc32xx_timer_init(struct device_node *np) | 
|  | { | 
|  | static int has_clocksource, has_clockevent; | 
|  | int ret; | 
|  |  | 
|  | if (!has_clocksource) { | 
|  | ret = lpc32xx_clocksource_init(np); | 
|  | if (!ret) { | 
|  | has_clocksource = 1; | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!has_clockevent) { | 
|  | ret = lpc32xx_clockevent_init(np); | 
|  | if (!ret) { | 
|  | has_clockevent = 1; | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  | CLOCKSOURCE_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init); |