| /* | 
 |  * pv88090-regulator.c - Regulator device driver for PV88090 | 
 |  * Copyright (C) 2015  Powerventure Semiconductor Ltd. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * as published by the Free Software Foundation; either version 2 | 
 |  * of the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  */ | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/regulator/driver.h> | 
 | #include <linux/regulator/machine.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/regulator/of_regulator.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/uaccess.h> | 
 | #include "pv88090-regulator.h" | 
 |  | 
 | #define PV88090_MAX_REGULATORS	5 | 
 |  | 
 | /* PV88090 REGULATOR IDs */ | 
 | enum { | 
 | 	/* BUCKs */ | 
 | 	PV88090_ID_BUCK1, | 
 | 	PV88090_ID_BUCK2, | 
 | 	PV88090_ID_BUCK3, | 
 |  | 
 | 	/* LDOs */ | 
 | 	PV88090_ID_LDO1, | 
 | 	PV88090_ID_LDO2, | 
 | }; | 
 |  | 
 | struct pv88090_regulator { | 
 | 	struct regulator_desc desc; | 
 | 	/* Current limiting */ | 
 | 	unsigned	n_current_limits; | 
 | 	const int	*current_limits; | 
 | 	unsigned int limit_mask; | 
 | 	unsigned int conf; | 
 | 	unsigned int conf2; | 
 | }; | 
 |  | 
 | struct pv88090 { | 
 | 	struct device *dev; | 
 | 	struct regmap *regmap; | 
 | 	struct regulator_dev *rdev[PV88090_MAX_REGULATORS]; | 
 | }; | 
 |  | 
 | struct pv88090_buck_voltage { | 
 | 	int min_uV; | 
 | 	int max_uV; | 
 | 	int uV_step; | 
 | }; | 
 |  | 
 | static const struct regmap_config pv88090_regmap_config = { | 
 | 	.reg_bits = 8, | 
 | 	.val_bits = 8, | 
 | }; | 
 |  | 
 | /* Current limits array (in uA) for BUCK1, BUCK2, BUCK3. | 
 |  *  Entry indexes corresponds to register values. | 
 |  */ | 
 |  | 
 | static const int pv88090_buck1_limits[] = { | 
 | 	 220000,  440000,  660000,  880000, 1100000, 1320000, 1540000, 1760000, | 
 | 	1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000, | 
 | 	3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000, | 
 | 	5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000 | 
 | }; | 
 |  | 
 | static const int pv88090_buck23_limits[] = { | 
 | 	1496000, 2393000, 3291000, 4189000 | 
 | }; | 
 |  | 
 | static const struct pv88090_buck_voltage pv88090_buck_vol[3] = { | 
 | 	{ | 
 | 		.min_uV = 600000, | 
 | 		.max_uV = 1393750, | 
 | 		.uV_step = 6250, | 
 | 	}, | 
 |  | 
 | 	{ | 
 | 		.min_uV = 1400000, | 
 | 		.max_uV = 2193750, | 
 | 		.uV_step = 6250, | 
 | 	}, | 
 | 	{ | 
 | 		.min_uV = 1250000, | 
 | 		.max_uV = 2837500, | 
 | 		.uV_step = 12500, | 
 | 	}, | 
 | }; | 
 |  | 
 | static unsigned int pv88090_buck_get_mode(struct regulator_dev *rdev) | 
 | { | 
 | 	struct pv88090_regulator *info = rdev_get_drvdata(rdev); | 
 | 	unsigned int data; | 
 | 	int ret, mode = 0; | 
 |  | 
 | 	ret = regmap_read(rdev->regmap, info->conf, &data); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	switch (data & PV88090_BUCK1_MODE_MASK) { | 
 | 	case PV88090_BUCK_MODE_SYNC: | 
 | 		mode = REGULATOR_MODE_FAST; | 
 | 		break; | 
 | 	case PV88090_BUCK_MODE_AUTO: | 
 | 		mode = REGULATOR_MODE_NORMAL; | 
 | 		break; | 
 | 	case PV88090_BUCK_MODE_SLEEP: | 
 | 		mode = REGULATOR_MODE_STANDBY; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return mode; | 
 | } | 
 |  | 
 | static int pv88090_buck_set_mode(struct regulator_dev *rdev, | 
 | 					unsigned int mode) | 
 | { | 
 | 	struct pv88090_regulator *info = rdev_get_drvdata(rdev); | 
 | 	int val = 0; | 
 |  | 
 | 	switch (mode) { | 
 | 	case REGULATOR_MODE_FAST: | 
 | 		val = PV88090_BUCK_MODE_SYNC; | 
 | 		break; | 
 | 	case REGULATOR_MODE_NORMAL: | 
 | 		val = PV88090_BUCK_MODE_AUTO; | 
 | 		break; | 
 | 	case REGULATOR_MODE_STANDBY: | 
 | 		val = PV88090_BUCK_MODE_SLEEP; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return regmap_update_bits(rdev->regmap, info->conf, | 
 | 					PV88090_BUCK1_MODE_MASK, val); | 
 | } | 
 |  | 
 | static int pv88090_set_current_limit(struct regulator_dev *rdev, int min, | 
 | 				    int max) | 
 | { | 
 | 	struct pv88090_regulator *info = rdev_get_drvdata(rdev); | 
 | 	int i; | 
 |  | 
 | 	/* search for closest to maximum */ | 
 | 	for (i = info->n_current_limits; i >= 0; i--) { | 
 | 		if (min <= info->current_limits[i] | 
 | 			&& max >= info->current_limits[i]) { | 
 | 			return regmap_update_bits(rdev->regmap, | 
 | 				info->conf, | 
 | 				info->limit_mask, | 
 | 				i << PV88090_BUCK1_ILIM_SHIFT); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int pv88090_get_current_limit(struct regulator_dev *rdev) | 
 | { | 
 | 	struct pv88090_regulator *info = rdev_get_drvdata(rdev); | 
 | 	unsigned int data; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(rdev->regmap, info->conf, &data); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	data = (data & info->limit_mask) >> PV88090_BUCK1_ILIM_SHIFT; | 
 | 	return info->current_limits[data]; | 
 | } | 
 |  | 
 | static struct regulator_ops pv88090_buck_ops = { | 
 | 	.get_mode = pv88090_buck_get_mode, | 
 | 	.set_mode = pv88090_buck_set_mode, | 
 | 	.enable = regulator_enable_regmap, | 
 | 	.disable = regulator_disable_regmap, | 
 | 	.is_enabled = regulator_is_enabled_regmap, | 
 | 	.set_voltage_sel = regulator_set_voltage_sel_regmap, | 
 | 	.get_voltage_sel = regulator_get_voltage_sel_regmap, | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | 	.set_current_limit = pv88090_set_current_limit, | 
 | 	.get_current_limit = pv88090_get_current_limit, | 
 | }; | 
 |  | 
 | static struct regulator_ops pv88090_ldo_ops = { | 
 | 	.enable = regulator_enable_regmap, | 
 | 	.disable = regulator_disable_regmap, | 
 | 	.is_enabled = regulator_is_enabled_regmap, | 
 | 	.set_voltage_sel = regulator_set_voltage_sel_regmap, | 
 | 	.get_voltage_sel = regulator_get_voltage_sel_regmap, | 
 | 	.list_voltage = regulator_list_voltage_linear, | 
 | }; | 
 |  | 
 | #define PV88090_BUCK(chip, regl_name, min, step, max, limits_array) \ | 
 | {\ | 
 | 	.desc	=	{\ | 
 | 		.id = chip##_ID_##regl_name,\ | 
 | 		.name = __stringify(chip##_##regl_name),\ | 
 | 		.of_match = of_match_ptr(#regl_name),\ | 
 | 		.regulators_node = of_match_ptr("regulators"),\ | 
 | 		.type = REGULATOR_VOLTAGE,\ | 
 | 		.owner = THIS_MODULE,\ | 
 | 		.ops = &pv88090_buck_ops,\ | 
 | 		.min_uV = min, \ | 
 | 		.uV_step = step, \ | 
 | 		.n_voltages = ((max) - (min))/(step) + 1, \ | 
 | 		.enable_reg = PV88090_REG_##regl_name##_CONF0, \ | 
 | 		.enable_mask = PV88090_##regl_name##_EN, \ | 
 | 		.vsel_reg = PV88090_REG_##regl_name##_CONF0, \ | 
 | 		.vsel_mask = PV88090_V##regl_name##_MASK, \ | 
 | 	},\ | 
 | 	.current_limits = limits_array, \ | 
 | 	.n_current_limits = ARRAY_SIZE(limits_array), \ | 
 | 	.limit_mask = PV88090_##regl_name##_ILIM_MASK, \ | 
 | 	.conf = PV88090_REG_##regl_name##_CONF1, \ | 
 | 	.conf2 = PV88090_REG_##regl_name##_CONF2, \ | 
 | } | 
 |  | 
 | #define PV88090_LDO(chip, regl_name, min, step, max) \ | 
 | {\ | 
 | 	.desc	=	{\ | 
 | 		.id = chip##_ID_##regl_name,\ | 
 | 		.name = __stringify(chip##_##regl_name),\ | 
 | 		.of_match = of_match_ptr(#regl_name),\ | 
 | 		.regulators_node = of_match_ptr("regulators"),\ | 
 | 		.type = REGULATOR_VOLTAGE,\ | 
 | 		.owner = THIS_MODULE,\ | 
 | 		.ops = &pv88090_ldo_ops,\ | 
 | 		.min_uV = min, \ | 
 | 		.uV_step = step, \ | 
 | 		.n_voltages = ((max) - (min))/(step) + 1, \ | 
 | 		.enable_reg = PV88090_REG_##regl_name##_CONT, \ | 
 | 		.enable_mask = PV88090_##regl_name##_EN, \ | 
 | 		.vsel_reg = PV88090_REG_##regl_name##_CONT, \ | 
 | 		.vsel_mask = PV88090_V##regl_name##_MASK, \ | 
 | 	},\ | 
 | } | 
 |  | 
 | static struct pv88090_regulator pv88090_regulator_info[] = { | 
 | 	PV88090_BUCK(PV88090, BUCK1, 600000, 6250, 1393750, | 
 | 		pv88090_buck1_limits), | 
 | 	PV88090_BUCK(PV88090, BUCK2, 600000, 6250, 1393750, | 
 | 		pv88090_buck23_limits), | 
 | 	PV88090_BUCK(PV88090, BUCK3, 600000, 6250, 1393750, | 
 | 		pv88090_buck23_limits), | 
 | 	PV88090_LDO(PV88090, LDO1, 1200000, 50000, 4350000), | 
 | 	PV88090_LDO(PV88090, LDO2,  650000, 25000, 2225000), | 
 | }; | 
 |  | 
 | static irqreturn_t pv88090_irq_handler(int irq, void *data) | 
 | { | 
 | 	struct pv88090 *chip = data; | 
 | 	int i, reg_val, err, ret = IRQ_NONE; | 
 |  | 
 | 	err = regmap_read(chip->regmap, PV88090_REG_EVENT_A, ®_val); | 
 | 	if (err < 0) | 
 | 		goto error_i2c; | 
 |  | 
 | 	if (reg_val & PV88090_E_VDD_FLT) { | 
 | 		for (i = 0; i < PV88090_MAX_REGULATORS; i++) { | 
 | 			if (chip->rdev[i] != NULL) { | 
 | 				regulator_notifier_call_chain(chip->rdev[i], | 
 | 					REGULATOR_EVENT_UNDER_VOLTAGE, | 
 | 					NULL); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		err = regmap_write(chip->regmap, PV88090_REG_EVENT_A, | 
 | 			PV88090_E_VDD_FLT); | 
 | 		if (err < 0) | 
 | 			goto error_i2c; | 
 |  | 
 | 		ret = IRQ_HANDLED; | 
 | 	} | 
 |  | 
 | 	if (reg_val & PV88090_E_OVER_TEMP) { | 
 | 		for (i = 0; i < PV88090_MAX_REGULATORS; i++) { | 
 | 			if (chip->rdev[i] != NULL) { | 
 | 				regulator_notifier_call_chain(chip->rdev[i], | 
 | 					REGULATOR_EVENT_OVER_TEMP, | 
 | 					NULL); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		err = regmap_write(chip->regmap, PV88090_REG_EVENT_A, | 
 | 			PV88090_E_OVER_TEMP); | 
 | 		if (err < 0) | 
 | 			goto error_i2c; | 
 |  | 
 | 		ret = IRQ_HANDLED; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 |  | 
 | error_i2c: | 
 | 	dev_err(chip->dev, "I2C error : %d\n", err); | 
 | 	return IRQ_NONE; | 
 | } | 
 |  | 
 | /* | 
 |  * I2C driver interface functions | 
 |  */ | 
 | static int pv88090_i2c_probe(struct i2c_client *i2c, | 
 | 		const struct i2c_device_id *id) | 
 | { | 
 | 	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev); | 
 | 	struct pv88090 *chip; | 
 | 	struct regulator_config config = { }; | 
 | 	int error, i, ret = 0; | 
 | 	unsigned int conf2, range, index; | 
 |  | 
 | 	chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88090), GFP_KERNEL); | 
 | 	if (!chip) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	chip->dev = &i2c->dev; | 
 | 	chip->regmap = devm_regmap_init_i2c(i2c, &pv88090_regmap_config); | 
 | 	if (IS_ERR(chip->regmap)) { | 
 | 		error = PTR_ERR(chip->regmap); | 
 | 		dev_err(chip->dev, "Failed to allocate register map: %d\n", | 
 | 			error); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(i2c, chip); | 
 |  | 
 | 	if (i2c->irq != 0) { | 
 | 		ret = regmap_write(chip->regmap, PV88090_REG_MASK_A, 0xFF); | 
 | 		if (ret < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to mask A reg: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		ret = regmap_write(chip->regmap, PV88090_REG_MASK_B, 0xFF); | 
 | 		if (ret < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to mask B reg: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, | 
 | 					pv88090_irq_handler, | 
 | 					IRQF_TRIGGER_LOW|IRQF_ONESHOT, | 
 | 					"pv88090", chip); | 
 | 		if (ret != 0) { | 
 | 			dev_err(chip->dev, "Failed to request IRQ: %d\n", | 
 | 				i2c->irq); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		ret = regmap_update_bits(chip->regmap, PV88090_REG_MASK_A, | 
 | 			PV88090_M_VDD_FLT | PV88090_M_OVER_TEMP, 0); | 
 | 		if (ret < 0) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to update mask reg: %d\n", ret); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 	} else { | 
 | 		dev_warn(chip->dev, "No IRQ configured\n"); | 
 | 	} | 
 |  | 
 | 	config.dev = chip->dev; | 
 | 	config.regmap = chip->regmap; | 
 |  | 
 | 	for (i = 0; i < PV88090_MAX_REGULATORS; i++) { | 
 | 		if (init_data) | 
 | 			config.init_data = &init_data[i]; | 
 |  | 
 | 		if (i == PV88090_ID_BUCK2 || i == PV88090_ID_BUCK3) { | 
 | 			ret = regmap_read(chip->regmap, | 
 | 				pv88090_regulator_info[i].conf2, &conf2); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 |  | 
 | 			conf2 = (conf2 >> PV88090_BUCK_VDAC_RANGE_SHIFT) & | 
 | 				PV88090_BUCK_VDAC_RANGE_MASK; | 
 |  | 
 | 			ret = regmap_read(chip->regmap, | 
 | 				PV88090_REG_BUCK_FOLD_RANGE, &range); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 |  | 
 | 			range = (range >> | 
 | 				 (PV88080_BUCK_VRANGE_GAIN_SHIFT + i - 1)) & | 
 | 				PV88080_BUCK_VRANGE_GAIN_MASK; | 
 | 			index = ((range << 1) | conf2); | 
 |  | 
 | 			pv88090_regulator_info[i].desc.min_uV | 
 | 				= pv88090_buck_vol[index].min_uV; | 
 | 			pv88090_regulator_info[i].desc.uV_step | 
 | 				= pv88090_buck_vol[index].uV_step; | 
 | 			pv88090_regulator_info[i].desc.n_voltages | 
 | 				= ((pv88090_buck_vol[index].max_uV) | 
 | 				- (pv88090_buck_vol[index].min_uV)) | 
 | 				/(pv88090_buck_vol[index].uV_step) + 1; | 
 | 		} | 
 |  | 
 | 		config.driver_data = (void *)&pv88090_regulator_info[i]; | 
 | 		chip->rdev[i] = devm_regulator_register(chip->dev, | 
 | 			&pv88090_regulator_info[i].desc, &config); | 
 | 		if (IS_ERR(chip->rdev[i])) { | 
 | 			dev_err(chip->dev, | 
 | 				"Failed to register PV88090 regulator\n"); | 
 | 			return PTR_ERR(chip->rdev[i]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id pv88090_i2c_id[] = { | 
 | 	{"pv88090", 0}, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, pv88090_i2c_id); | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct of_device_id pv88090_dt_ids[] = { | 
 | 	{ .compatible = "pvs,pv88090", .data = &pv88090_i2c_id[0] }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, pv88090_dt_ids); | 
 | #endif | 
 |  | 
 | static struct i2c_driver pv88090_regulator_driver = { | 
 | 	.driver = { | 
 | 		.name = "pv88090", | 
 | 		.of_match_table = of_match_ptr(pv88090_dt_ids), | 
 | 	}, | 
 | 	.probe = pv88090_i2c_probe, | 
 | 	.id_table = pv88090_i2c_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(pv88090_regulator_driver); | 
 |  | 
 | MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); | 
 | MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88090"); | 
 | MODULE_LICENSE("GPL"); |