| /* |
| * i8259 interrupt controller driver. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #undef DEBUG |
| |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <asm/io.h> |
| #include <asm/i8259.h> |
| #include <asm/prom.h> |
| |
| static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */ |
| |
| static unsigned char cached_8259[2] = { 0xff, 0xff }; |
| #define cached_A1 (cached_8259[0]) |
| #define cached_21 (cached_8259[1]) |
| |
| static DEFINE_RAW_SPINLOCK(i8259_lock); |
| |
| static struct irq_domain *i8259_host; |
| |
| /* |
| * Acknowledge the IRQ using either the PCI host bridge's interrupt |
| * acknowledge feature or poll. How i8259_init() is called determines |
| * which is called. It should be noted that polling is broken on some |
| * IBM and Motorola PReP boxes so we must use the int-ack feature on them. |
| */ |
| unsigned int i8259_irq(void) |
| { |
| int irq; |
| int lock = 0; |
| |
| /* Either int-ack or poll for the IRQ */ |
| if (pci_intack) |
| irq = readb(pci_intack); |
| else { |
| raw_spin_lock(&i8259_lock); |
| lock = 1; |
| |
| /* Perform an interrupt acknowledge cycle on controller 1. */ |
| outb(0x0C, 0x20); /* prepare for poll */ |
| irq = inb(0x20) & 7; |
| if (irq == 2 ) { |
| /* |
| * Interrupt is cascaded so perform interrupt |
| * acknowledge on controller 2. |
| */ |
| outb(0x0C, 0xA0); /* prepare for poll */ |
| irq = (inb(0xA0) & 7) + 8; |
| } |
| } |
| |
| if (irq == 7) { |
| /* |
| * This may be a spurious interrupt. |
| * |
| * Read the interrupt status register (ISR). If the most |
| * significant bit is not set then there is no valid |
| * interrupt. |
| */ |
| if (!pci_intack) |
| outb(0x0B, 0x20); /* ISR register */ |
| if(~inb(0x20) & 0x80) |
| irq = 0; |
| } else if (irq == 0xff) |
| irq = 0; |
| |
| if (lock) |
| raw_spin_unlock(&i8259_lock); |
| return irq; |
| } |
| |
| static void i8259_mask_and_ack_irq(struct irq_data *d) |
| { |
| unsigned long flags; |
| |
| raw_spin_lock_irqsave(&i8259_lock, flags); |
| if (d->irq > 7) { |
| cached_A1 |= 1 << (d->irq-8); |
| inb(0xA1); /* DUMMY */ |
| outb(cached_A1, 0xA1); |
| outb(0x20, 0xA0); /* Non-specific EOI */ |
| outb(0x20, 0x20); /* Non-specific EOI to cascade */ |
| } else { |
| cached_21 |= 1 << d->irq; |
| inb(0x21); /* DUMMY */ |
| outb(cached_21, 0x21); |
| outb(0x20, 0x20); /* Non-specific EOI */ |
| } |
| raw_spin_unlock_irqrestore(&i8259_lock, flags); |
| } |
| |
| static void i8259_set_irq_mask(int irq_nr) |
| { |
| outb(cached_A1,0xA1); |
| outb(cached_21,0x21); |
| } |
| |
| static void i8259_mask_irq(struct irq_data *d) |
| { |
| unsigned long flags; |
| |
| pr_debug("i8259_mask_irq(%d)\n", d->irq); |
| |
| raw_spin_lock_irqsave(&i8259_lock, flags); |
| if (d->irq < 8) |
| cached_21 |= 1 << d->irq; |
| else |
| cached_A1 |= 1 << (d->irq-8); |
| i8259_set_irq_mask(d->irq); |
| raw_spin_unlock_irqrestore(&i8259_lock, flags); |
| } |
| |
| static void i8259_unmask_irq(struct irq_data *d) |
| { |
| unsigned long flags; |
| |
| pr_debug("i8259_unmask_irq(%d)\n", d->irq); |
| |
| raw_spin_lock_irqsave(&i8259_lock, flags); |
| if (d->irq < 8) |
| cached_21 &= ~(1 << d->irq); |
| else |
| cached_A1 &= ~(1 << (d->irq-8)); |
| i8259_set_irq_mask(d->irq); |
| raw_spin_unlock_irqrestore(&i8259_lock, flags); |
| } |
| |
| static struct irq_chip i8259_pic = { |
| .name = "i8259", |
| .irq_mask = i8259_mask_irq, |
| .irq_disable = i8259_mask_irq, |
| .irq_unmask = i8259_unmask_irq, |
| .irq_mask_ack = i8259_mask_and_ack_irq, |
| }; |
| |
| static struct resource pic1_iores = { |
| .name = "8259 (master)", |
| .start = 0x20, |
| .end = 0x21, |
| .flags = IORESOURCE_BUSY, |
| }; |
| |
| static struct resource pic2_iores = { |
| .name = "8259 (slave)", |
| .start = 0xa0, |
| .end = 0xa1, |
| .flags = IORESOURCE_BUSY, |
| }; |
| |
| static struct resource pic_edgectrl_iores = { |
| .name = "8259 edge control", |
| .start = 0x4d0, |
| .end = 0x4d1, |
| .flags = IORESOURCE_BUSY, |
| }; |
| |
| static int i8259_host_match(struct irq_domain *h, struct device_node *node, |
| enum irq_domain_bus_token bus_token) |
| { |
| struct device_node *of_node = irq_domain_get_of_node(h); |
| return of_node == NULL || of_node == node; |
| } |
| |
| static int i8259_host_map(struct irq_domain *h, unsigned int virq, |
| irq_hw_number_t hw) |
| { |
| pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw); |
| |
| /* We block the internal cascade */ |
| if (hw == 2) |
| irq_set_status_flags(virq, IRQ_NOREQUEST); |
| |
| /* We use the level handler only for now, we might want to |
| * be more cautious here but that works for now |
| */ |
| irq_set_status_flags(virq, IRQ_LEVEL); |
| irq_set_chip_and_handler(virq, &i8259_pic, handle_level_irq); |
| return 0; |
| } |
| |
| static int i8259_host_xlate(struct irq_domain *h, struct device_node *ct, |
| const u32 *intspec, unsigned int intsize, |
| irq_hw_number_t *out_hwirq, unsigned int *out_flags) |
| { |
| static unsigned char map_isa_senses[4] = { |
| IRQ_TYPE_LEVEL_LOW, |
| IRQ_TYPE_LEVEL_HIGH, |
| IRQ_TYPE_EDGE_FALLING, |
| IRQ_TYPE_EDGE_RISING, |
| }; |
| |
| *out_hwirq = intspec[0]; |
| if (intsize > 1 && intspec[1] < 4) |
| *out_flags = map_isa_senses[intspec[1]]; |
| else |
| *out_flags = IRQ_TYPE_NONE; |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops i8259_host_ops = { |
| .match = i8259_host_match, |
| .map = i8259_host_map, |
| .xlate = i8259_host_xlate, |
| }; |
| |
| struct irq_domain *i8259_get_host(void) |
| { |
| return i8259_host; |
| } |
| |
| /** |
| * i8259_init - Initialize the legacy controller |
| * @node: device node of the legacy PIC (can be NULL, but then, it will match |
| * all interrupts, so beware) |
| * @intack_addr: PCI interrupt acknowledge (real) address which will return |
| * the active irq from the 8259 |
| */ |
| void i8259_init(struct device_node *node, unsigned long intack_addr) |
| { |
| unsigned long flags; |
| |
| /* initialize the controller */ |
| raw_spin_lock_irqsave(&i8259_lock, flags); |
| |
| /* Mask all first */ |
| outb(0xff, 0xA1); |
| outb(0xff, 0x21); |
| |
| /* init master interrupt controller */ |
| outb(0x11, 0x20); /* Start init sequence */ |
| outb(0x00, 0x21); /* Vector base */ |
| outb(0x04, 0x21); /* edge triggered, Cascade (slave) on IRQ2 */ |
| outb(0x01, 0x21); /* Select 8086 mode */ |
| |
| /* init slave interrupt controller */ |
| outb(0x11, 0xA0); /* Start init sequence */ |
| outb(0x08, 0xA1); /* Vector base */ |
| outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */ |
| outb(0x01, 0xA1); /* Select 8086 mode */ |
| |
| /* That thing is slow */ |
| udelay(100); |
| |
| /* always read ISR */ |
| outb(0x0B, 0x20); |
| outb(0x0B, 0xA0); |
| |
| /* Unmask the internal cascade */ |
| cached_21 &= ~(1 << 2); |
| |
| /* Set interrupt masks */ |
| outb(cached_A1, 0xA1); |
| outb(cached_21, 0x21); |
| |
| raw_spin_unlock_irqrestore(&i8259_lock, flags); |
| |
| /* create a legacy host */ |
| i8259_host = irq_domain_add_legacy_isa(node, &i8259_host_ops, NULL); |
| if (i8259_host == NULL) { |
| printk(KERN_ERR "i8259: failed to allocate irq host !\n"); |
| return; |
| } |
| |
| /* reserve our resources */ |
| /* XXX should we continue doing that ? it seems to cause problems |
| * with further requesting of PCI IO resources for that range... |
| * need to look into it. |
| */ |
| request_resource(&ioport_resource, &pic1_iores); |
| request_resource(&ioport_resource, &pic2_iores); |
| request_resource(&ioport_resource, &pic_edgectrl_iores); |
| |
| if (intack_addr != 0) |
| pci_intack = ioremap(intack_addr, 1); |
| |
| printk(KERN_INFO "i8259 legacy interrupt controller initialized\n"); |
| } |