blob: 08aafba4481c66345b7ef770b3e44ce8b464f843 [file] [log] [blame]
/*
* STMicroelectronics magnetometers driver
*
* Copyright 2012-2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
*
* Licensed under the GPL-2.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/common/st_sensors.h>
#include "st_magn.h"
#define ST_MAGN_NUMBER_DATA_CHANNELS 3
/* DEFAULT VALUE FOR SENSORS */
#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0X03
#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0X07
#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0X05
/* FULLSCALE */
#define ST_MAGN_FS_AVL_1300MG 1300
#define ST_MAGN_FS_AVL_1900MG 1900
#define ST_MAGN_FS_AVL_2500MG 2500
#define ST_MAGN_FS_AVL_4000MG 4000
#define ST_MAGN_FS_AVL_4700MG 4700
#define ST_MAGN_FS_AVL_5600MG 5600
#define ST_MAGN_FS_AVL_8000MG 8000
#define ST_MAGN_FS_AVL_8100MG 8100
#define ST_MAGN_FS_AVL_12000MG 12000
#define ST_MAGN_FS_AVL_15000MG 15000
#define ST_MAGN_FS_AVL_16000MG 16000
/* Special L addresses for Sensor 2 */
#define ST_MAGN_2_OUT_X_L_ADDR 0x28
#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c
/* Special L addresses for sensor 3 */
#define ST_MAGN_3_OUT_X_L_ADDR 0x68
#define ST_MAGN_3_OUT_Y_L_ADDR 0x6a
#define ST_MAGN_3_OUT_Z_L_ADDR 0x6c
static const struct iio_chan_spec st_magn_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_X_H_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_Y_H_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_Z_H_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_X_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_Y_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_Z_L_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct iio_chan_spec st_magn_3_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
ST_MAGN_3_OUT_X_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
ST_MAGN_3_OUT_Y_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
ST_MAGN_3_OUT_Z_L_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct st_sensor_settings st_magn_sensors_settings[] = {
{
.wai = 0, /* This sensor has no valid WhoAmI report 0 */
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM303DLH_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
.odr = {
.addr = 0x00,
.mask = 0x1c,
.odr_avl = {
{ .hz = 1, .value = 0x00 },
{ .hz = 2, .value = 0x01 },
{ .hz = 3, .value = 0x02 },
{ .hz = 8, .value = 0x03 },
{ .hz = 15, .value = 0x04 },
{ .hz = 30, .value = 0x05 },
{ .hz = 75, .value = 0x06 },
/* 220 Hz, 0x07 reportedly exist */
},
},
.pw = {
.addr = 0x02,
.mask = 0x03,
.value_on = 0x00,
.value_off = 0x03,
},
.fs = {
.addr = 0x01,
.mask = 0xe0,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_1300MG,
.value = 0x01,
.gain = 1100,
.gain2 = 980,
},
[1] = {
.num = ST_MAGN_FS_AVL_1900MG,
.value = 0x02,
.gain = 855,
.gain2 = 760,
},
[2] = {
.num = ST_MAGN_FS_AVL_2500MG,
.value = 0x03,
.gain = 670,
.gain2 = 600,
},
[3] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = 0x04,
.gain = 450,
.gain2 = 400,
},
[4] = {
.num = ST_MAGN_FS_AVL_4700MG,
.value = 0x05,
.gain = 400,
.gain2 = 355,
},
[5] = {
.num = ST_MAGN_FS_AVL_5600MG,
.value = 0x06,
.gain = 330,
.gain2 = 295,
},
[6] = {
.num = ST_MAGN_FS_AVL_8100MG,
.value = 0x07,
.gain = 230,
.gain2 = 205,
},
},
},
.multi_read_bit = false,
.bootime = 2,
},
{
.wai = 0x3c,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LSM303DLHC_MAGN_DEV_NAME,
[1] = LSM303DLM_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
.odr = {
.addr = 0x00,
.mask = 0x1c,
.odr_avl = {
{ .hz = 1, .value = 0x00 },
{ .hz = 2, .value = 0x01 },
{ .hz = 3, .value = 0x02 },
{ .hz = 8, .value = 0x03 },
{ .hz = 15, .value = 0x04 },
{ .hz = 30, .value = 0x05 },
{ .hz = 75, .value = 0x06 },
{ .hz = 220, .value = 0x07 },
},
},
.pw = {
.addr = 0x02,
.mask = 0x03,
.value_on = 0x00,
.value_off = 0x03,
},
.fs = {
.addr = 0x01,
.mask = 0xe0,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_1300MG,
.value = 0x01,
.gain = 909,
.gain2 = 1020,
},
[1] = {
.num = ST_MAGN_FS_AVL_1900MG,
.value = 0x02,
.gain = 1169,
.gain2 = 1315,
},
[2] = {
.num = ST_MAGN_FS_AVL_2500MG,
.value = 0x03,
.gain = 1492,
.gain2 = 1666,
},
[3] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = 0x04,
.gain = 2222,
.gain2 = 2500,
},
[4] = {
.num = ST_MAGN_FS_AVL_4700MG,
.value = 0x05,
.gain = 2500,
.gain2 = 2816,
},
[5] = {
.num = ST_MAGN_FS_AVL_5600MG,
.value = 0x06,
.gain = 3030,
.gain2 = 3389,
},
[6] = {
.num = ST_MAGN_FS_AVL_8100MG,
.value = 0x07,
.gain = 4347,
.gain2 = 4878,
},
},
},
.multi_read_bit = false,
.bootime = 2,
},
{
.wai = 0x3d,
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = LIS3MDL_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
.odr = {
.addr = 0x20,
.mask = 0x1c,
.odr_avl = {
{ .hz = 1, .value = 0x00 },
{ .hz = 2, .value = 0x01 },
{ .hz = 3, .value = 0x02 },
{ .hz = 5, .value = 0x03 },
{ .hz = 10, .value = 0x04 },
{ .hz = 20, .value = 0x05 },
{ .hz = 40, .value = 0x06 },
{ .hz = 80, .value = 0x07 },
},
},
.pw = {
.addr = 0x22,
.mask = 0x03,
.value_on = 0x00,
.value_off = 0x03,
},
.fs = {
.addr = 0x21,
.mask = 0x60,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = 0x00,
.gain = 146,
},
[1] = {
.num = ST_MAGN_FS_AVL_8000MG,
.value = 0x01,
.gain = 292,
},
[2] = {
.num = ST_MAGN_FS_AVL_12000MG,
.value = 0x02,
.gain = 438,
},
[3] = {
.num = ST_MAGN_FS_AVL_16000MG,
.value = 0x03,
.gain = 584,
},
},
},
.drdy_irq = {
/* drdy line is routed drdy pin */
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
},
.multi_read_bit = true,
.bootime = 2,
},
{
.wai = 0x40,
.wai_addr = 0x4f,
.sensors_supported = {
[0] = LSM303AGR_MAGN_DEV_NAME,
[1] = LIS2MDL_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_3_16bit_channels,
.odr = {
.addr = 0x60,
.mask = 0x0c,
.odr_avl = {
{ .hz = 10, .value = 0x00 },
{ .hz = 20, .value = 0x01 },
{ .hz = 50, .value = 0x02 },
{ .hz = 100, .value = 0x03 },
},
},
.pw = {
.addr = 0x60,
.mask = 0x03,
.value_on = 0x00,
.value_off = 0x03,
},
.fs = {
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_15000MG,
.gain = 1500,
},
},
},
.bdu = {
.addr = 0x62,
.mask = 0x10,
},
.drdy_irq = {
.addr = 0x62,
.mask_int1 = 0x01,
.addr_stat_drdy = 0x67,
},
.multi_read_bit = false,
.bootime = 2,
},
};
static int st_magn_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *ch, int *val,
int *val2, long mask)
{
int err;
struct st_sensor_data *mdata = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
err = st_sensors_read_info_raw(indio_dev, ch, val);
if (err < 0)
goto read_error;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
if ((ch->scan_index == ST_SENSORS_SCAN_Z) &&
(mdata->current_fullscale->gain2 != 0))
*val2 = mdata->current_fullscale->gain2;
else
*val2 = mdata->current_fullscale->gain;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = mdata->odr;
return IIO_VAL_INT;
default:
return -EINVAL;
}
read_error:
return err;
}
static int st_magn_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
int err;
switch (mask) {
case IIO_CHAN_INFO_SCALE:
err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
if (val2)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
err = st_sensors_set_odr(indio_dev, val);
mutex_unlock(&indio_dev->mlock);
return err;
default:
err = -EINVAL;
}
return err;
}
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available);
static struct attribute *st_magn_attributes[] = {
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_magn_scale_available.dev_attr.attr,
NULL,
};
static const struct attribute_group st_magn_attribute_group = {
.attrs = st_magn_attributes,
};
static const struct iio_info magn_info = {
.driver_module = THIS_MODULE,
.attrs = &st_magn_attribute_group,
.read_raw = &st_magn_read_raw,
.write_raw = &st_magn_write_raw,
.debugfs_reg_access = &st_sensors_debugfs_reg_access,
};
#ifdef CONFIG_IIO_TRIGGER
static const struct iio_trigger_ops st_magn_trigger_ops = {
.owner = THIS_MODULE,
.set_trigger_state = ST_MAGN_TRIGGER_SET_STATE,
.validate_device = st_sensors_validate_device,
};
#define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops)
#else
#define ST_MAGN_TRIGGER_OPS NULL
#endif
int st_magn_common_probe(struct iio_dev *indio_dev)
{
struct st_sensor_data *mdata = iio_priv(indio_dev);
int irq = mdata->get_irq_data_ready(indio_dev);
int err;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &magn_info;
mutex_init(&mdata->tb.buf_lock);
err = st_sensors_power_enable(indio_dev);
if (err)
return err;
err = st_sensors_check_device_support(indio_dev,
ARRAY_SIZE(st_magn_sensors_settings),
st_magn_sensors_settings);
if (err < 0)
goto st_magn_power_off;
mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
indio_dev->channels = mdata->sensor_settings->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
&mdata->sensor_settings->fs.fs_avl[0];
mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;
err = st_sensors_init_sensor(indio_dev, NULL);
if (err < 0)
goto st_magn_power_off;
err = st_magn_allocate_ring(indio_dev);
if (err < 0)
goto st_magn_power_off;
if (irq > 0) {
err = st_sensors_allocate_trigger(indio_dev,
ST_MAGN_TRIGGER_OPS);
if (err < 0)
goto st_magn_probe_trigger_error;
}
err = iio_device_register(indio_dev);
if (err)
goto st_magn_device_register_error;
dev_info(&indio_dev->dev, "registered magnetometer %s\n",
indio_dev->name);
return 0;
st_magn_device_register_error:
if (irq > 0)
st_sensors_deallocate_trigger(indio_dev);
st_magn_probe_trigger_error:
st_magn_deallocate_ring(indio_dev);
st_magn_power_off:
st_sensors_power_disable(indio_dev);
return err;
}
EXPORT_SYMBOL(st_magn_common_probe);
void st_magn_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *mdata = iio_priv(indio_dev);
st_sensors_power_disable(indio_dev);
iio_device_unregister(indio_dev);
if (mdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_magn_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_magn_common_remove);
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics magnetometers driver");
MODULE_LICENSE("GPL v2");