blob: 4d1b4c003376d1d0d196c623738e60f8d07826e4 [file] [log] [blame]
/*
* Copyright 2011, Netlogic Microsystems.
* Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/resource.h>
#include <linux/spi/flash.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlr/iomap.h>
#include <asm/netlogic/xlr/flash.h>
#include <asm/netlogic/xlr/bridge.h>
#include <asm/netlogic/xlr/gpio.h>
#include <asm/netlogic/xlr/xlr.h>
/*
* Default NOR partition layout
*/
static struct mtd_partition xlr_nor_parts[] = {
{
.name = "User FS",
.offset = 0x800000,
.size = MTDPART_SIZ_FULL,
}
};
/*
* Default NAND partition layout
*/
static struct mtd_partition xlr_nand_parts[] = {
{
.name = "Root Filesystem",
.offset = 64 * 64 * 2048,
.size = 432 * 64 * 2048,
},
{
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
/* Use PHYSMAP flash for NOR */
struct physmap_flash_data xlr_nor_data = {
.width = 2,
.parts = xlr_nor_parts,
.nr_parts = ARRAY_SIZE(xlr_nor_parts),
};
static struct resource xlr_nor_res[] = {
{
.flags = IORESOURCE_MEM,
},
};
static struct platform_device xlr_nor_dev = {
.name = "physmap-flash",
.dev = {
.platform_data = &xlr_nor_data,
},
.num_resources = ARRAY_SIZE(xlr_nor_res),
.resource = xlr_nor_res,
};
/*
* Use "gen_nand" driver for NAND flash
*
* There seems to be no way to store a private pointer containing
* platform specific info in gen_nand drivier. We will use a global
* struct for now, since we currently have only one NAND chip per board.
*/
struct xlr_nand_flash_priv {
int cs;
uint64_t flash_mmio;
};
static struct xlr_nand_flash_priv nand_priv;
static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
if (ctrl & NAND_CLE)
nlm_write_reg(nand_priv.flash_mmio,
FLASH_NAND_CLE(nand_priv.cs), cmd);
else if (ctrl & NAND_ALE)
nlm_write_reg(nand_priv.flash_mmio,
FLASH_NAND_ALE(nand_priv.cs), cmd);
}
struct platform_nand_data xlr_nand_data = {
.chip = {
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(xlr_nand_parts),
.chip_delay = 50,
.partitions = xlr_nand_parts,
},
.ctrl = {
.cmd_ctrl = xlr_nand_ctrl,
},
};
static struct resource xlr_nand_res[] = {
{
.flags = IORESOURCE_MEM,
},
};
static struct platform_device xlr_nand_dev = {
.name = "gen_nand",
.id = -1,
.num_resources = ARRAY_SIZE(xlr_nand_res),
.resource = xlr_nand_res,
.dev = {
.platform_data = &xlr_nand_data,
}
};
/*
* XLR/XLS supports upto 8 devices on its FLASH interface. The value in
* FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
* flash devices.
* Under this, each flash device has an offset and size given by the
* CSBASE_ADDR and CSBASE_MASK registers for the device.
*
* The CSBASE_ registers are expected to be setup by the bootloader.
*/
static void setup_flash_resource(uint64_t flash_mmio,
uint64_t flash_map_base, int cs, struct resource *res)
{
u32 base, mask;
base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
res->start = flash_map_base + ((unsigned long)base << 16);
res->end = res->start + (mask + 1) * 64 * 1024;
}
static int __init xlr_flash_init(void)
{
uint64_t gpio_mmio, flash_mmio, flash_map_base;
u32 gpio_resetcfg, flash_bar;
int cs, boot_nand, boot_nor;
/* Flash address bits 39:24 is in bridge flash BAR */
flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
flash_map_base = (flash_bar & 0xffff0000) << 8;
gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
/* Get the chip reset config */
gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
/* Check for boot flash type */
boot_nor = boot_nand = 0;
if (nlm_chip_is_xls()) {
/* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
if (gpio_resetcfg & (1 << 16))
boot_nand = 1;
/* check boot from PCMCIA, (GPIO reset reg bit 15 */
if ((gpio_resetcfg & (1 << 15)) == 0)
boot_nor = 1; /* not set, booted from NOR */
} else { /* XLR */
/* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
if ((gpio_resetcfg & (1 << 16)) == 0)
boot_nor = 1; /* not set, booted from NOR */
}
/* boot flash at chip select 0 */
cs = 0;
if (boot_nand) {
nand_priv.cs = cs;
nand_priv.flash_mmio = flash_mmio;
setup_flash_resource(flash_mmio, flash_map_base, cs,
xlr_nand_res);
/* Initialize NAND flash at CS 0 */
nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
FLASH_NAND_CSDEV_PARAM);
nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
FLASH_NAND_CSTIME_PARAMA);
nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
FLASH_NAND_CSTIME_PARAMB);
pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
return platform_device_register(&xlr_nand_dev);
}
if (boot_nor) {
setup_flash_resource(flash_mmio, flash_map_base, cs,
xlr_nor_res);
pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
return platform_device_register(&xlr_nor_dev);
}
return 0;
}
arch_initcall(xlr_flash_init);