drivers/net/fddi/skfp/h/hwmtm.h - arm/linux - Git at Google

 /******************************************************************************
  *
  *	(C)Copyright 1998,1999 SysKonnect,
  *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  *
  *	The information in this file is provided "AS IS" without warranty.
  *
  ******************************************************************************/

 #ifndef	_HWM_
 #define	_HWM_

 #include "mbuf.h"

 /*
  * MACRO for DMA synchronization:
  *	The descriptor 'desc' is flushed for the device 'flag'.
  *	Devices are the CPU (DDI_DMA_SYNC_FORCPU) and the
  *	adapter (DDI_DMA_SYNC_FORDEV).
  *
  *	'desc'	Pointer to a Rx or Tx descriptor.
  *	'flag'	Flag for direction (view for CPU or DEVICE) that
  *		should be synchronized.
  *
  *	Empty macros and defines are specified here. The real macro
  *	is os-specific and should be defined in osdef1st.h.
  */
 #ifndef DRV_BUF_FLUSH
 #define DRV_BUF_FLUSH(desc,flag)
 #define DDI_DMA_SYNC_FORCPU
 #define DDI_DMA_SYNC_FORDEV
 #endif

 	/*
 	 * hardware modul dependent receive modes
 	 */
 #define	RX_ENABLE_PASS_SMT	21
 #define	RX_DISABLE_PASS_SMT	22
 #define	RX_ENABLE_PASS_NSA	23
 #define	RX_DISABLE_PASS_NSA	24
 #define	RX_ENABLE_PASS_DB	25
 #define	RX_DISABLE_PASS_DB	26
 #define	RX_DISABLE_PASS_ALL	27
 #define	RX_DISABLE_LLC_PROMISC	28
 #define	RX_ENABLE_LLC_PROMISC	29


 #ifndef	DMA_RD
 #define DMA_RD		1	/* memory -> hw */
 #endif
 #ifndef DMA_WR
 #define DMA_WR		2	/* hw -> memory */
 #endif
 #define SMT_BUF		0x80

 	/*
 	 * bits of the frame status byte
 	 */
 #define EN_IRQ_EOF	0x02	/* get IRQ after end of frame transmission */
 #define	LOC_TX		0x04	/* send frame to the local SMT */
 #define LAST_FRAG	0x08	/* last TxD of the frame */
 #define	FIRST_FRAG	0x10	/* first TxD of the frame */
 #define	LAN_TX		0x20	/* send frame to network if set */
 #define RING_DOWN	0x40	/* error: unable to send, ring down */
 #define OUT_OF_TXD	0x80	/* error: not enough TxDs available */


 #ifndef NULL
 #define NULL 		0
 #endif

 #define C_INDIC		(1L<<25)
 #define A_INDIC		(1L<<26)
 #define	RD_FS_LOCAL	0x80

 	/*
 	 * DEBUG FLAGS
 	 */
 #define	DEBUG_SMTF	1
 #define	DEBUG_SMT	2
 #define	DEBUG_ECM	3
 #define	DEBUG_RMT	4
 #define	DEBUG_CFM	5
 #define	DEBUG_PCM	6
 #define	DEBUG_SBA	7
 #define	DEBUG_ESS	8

 #define	DB_HWM_RX	10
 #define	DB_HWM_TX	11
 #define DB_HWM_GEN	12

 struct s_mbuf_pool {
 #ifndef	MB_OUTSIDE_SMC
 	SMbuf		mb[MAX_MBUF] ;		/* mbuf pool */
 #endif
 	SMbuf		*mb_start ;		/* points to the first mb */
 	SMbuf		*mb_free ;		/* free queue */
 } ;

 struct hwm_r {
 	/*
 	 * hardware modul specific receive variables
 	 */
 	u_int			len ;		/* length of the whole frame */
 	char			*mb_pos ;	/* SMbuf receive position */
 } ;

 struct hw_modul {
 	/*
 	 * All hardware modul specific variables
 	 */
 	struct	s_mbuf_pool	mbuf_pool ;
 	struct	hwm_r	r ;

 	union s_fp_descr volatile *descr_p ; /* points to the desriptor area */

 	u_short pass_SMT ;		/* pass SMT frames */
 	u_short pass_NSA ;		/* pass all NSA frames */
 	u_short pass_DB ;		/* pass Direct Beacon Frames */
 	u_short pass_llc_promisc ;	/* pass all llc frames (default ON) */

 	SMbuf	*llc_rx_pipe ;		/* points to the first queued llc fr */
 	SMbuf	*llc_rx_tail ;		/* points to the last queued llc fr */
 	int	queued_rx_frames ;	/* number of queued frames */

 	SMbuf	*txd_tx_pipe ;		/* points to first mb in the txd ring */
 	SMbuf	*txd_tx_tail ;		/* points to last mb in the txd ring */
 	int	queued_txd_mb ;		/* number of SMT MBufs in txd ring */

 	int	rx_break ;		/* rev. was breaked because ind. off */
 	int	leave_isr ;		/* leave fddi_isr immedeately if set */
 	int	isr_flag ;		/* set, when HWM is entered from isr */
 	/*
 	 * variables for the current transmit frame
 	 */
 	struct s_smt_tx_queue *tx_p ;	/* pointer to the transmit queue */
 	u_long	tx_descr ;		/* tx descriptor for FORMAC+ */
 	int	tx_len ;		/* tx frame length */
 	SMbuf	*tx_mb ;		/* SMT tx MBuf pointer */
 	char	*tx_data ;		/* data pointer to the SMT tx Mbuf */

 	int	detec_count ;		/* counter for out of RxD condition */
 	u_long	rx_len_error ;		/* rx len FORMAC != sum of fragments */
 } ;


 /*
  * DEBUG structs and macros
  */

 #ifdef	DEBUG
 struct os_debug {
 	int	hwm_rx ;
 	int	hwm_tx ;
 	int	hwm_gen ;
 } ;
 #endif

 #ifdef	DEBUG
 #ifdef	DEBUG_BRD
 #define	DB_P	smc->debug
 #else
 #define DB_P	debug
 #endif

 #define DB_RX(lev, fmt, ...)						\
 do {									\
 	if (DB_P.d_os.hwm_rx >= (lev))					\
 		printf(fmt "\n", ##__VA_ARGS__);			\
 } while (0)
 #define DB_TX(lev, fmt, ...)						\
 do {									\
 	if (DB_P.d_os.hwm_tx >= (lev))					\
 		printf(fmt "\n", ##__VA_ARGS__);			\
 } while (0)
 #define DB_GEN(lev, fmt, ...)						\
 do {									\
 	if (DB_P.d_os.hwm_gen >= (lev))					\
 		printf(fmt "\n", ##__VA_ARGS__);			\
 } while (0)
 #else	/* DEBUG */
 #define DB_RX(lev, fmt, ...)	no_printk(fmt "\n", ##__VA_ARGS__)
 #define DB_TX(lev, fmt, ...)	no_printk(fmt "\n", ##__VA_ARGS__)
 #define DB_GEN(lev, fmt, ...)	no_printk(fmt "\n", ##__VA_ARGS__)
 #endif	/* DEBUG */

 #ifndef	SK_BREAK
 #define	SK_BREAK()
 #endif


 /*
  * HWM Macros
  */

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_TX_PHYS)
  *	u_long HWM_GET_TX_PHYS(txd)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to read
  *		the physical address of the specified TxD.
  *
  * para	txd	pointer to the TxD
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_TX_PHYS(txd)		(u_long)AIX_REVERSE((txd)->txd_tbadr)

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_TX_LEN)
  *	int HWM_GET_TX_LEN(txd)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to read
  *		the fragment length of the specified TxD
  *
  * para	rxd	pointer to the TxD
  *
  * return	the length of the fragment in bytes
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_TX_LEN(txd)	((int)AIX_REVERSE((txd)->txd_tbctrl)& RD_LENGTH)

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_TX_USED)
  *	txd *HWM_GET_TX_USED(smc,queue)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to get the
  *		number of used TxDs for the queue, specified by the index.
  *
  * para	queue	the number of the send queue: Can be specified by
  *		QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
  *
  * return	number of used TxDs for this send queue
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_TX_USED(smc,queue)	(int) (smc)->hw.fp.tx_q[queue].tx_used

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_CURR_TXD)
  *	txd *HWM_GET_CURR_TXD(smc,queue)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to get the
  *		pointer to the TxD which points to the current queue put
  *		position.
  *
  * para	queue	the number of the send queue: Can be specified by
  *		QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
  *
  * return	pointer to the current TxD
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_CURR_TXD(smc,queue)	(struct s_smt_fp_txd volatile *)\
 					(smc)->hw.fp.tx_q[queue].tx_curr_put

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_RX_FRAG_LEN)
  *	int HWM_GET_RX_FRAG_LEN(rxd)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to read
  *		the fragment length of the specified RxD
  *
  * para	rxd	pointer to the RxD
  *
  * return	the length of the fragment in bytes
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_RX_FRAG_LEN(rxd)	((int)AIX_REVERSE((rxd)->rxd_rbctrl)& \
 				RD_LENGTH)

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_RX_PHYS)
  *	u_long HWM_GET_RX_PHYS(rxd)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to read
  *		the physical address of the specified RxD.
  *
  * para	rxd	pointer to the RxD
  *
  * return	the RxD's physical pointer to the data fragment
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_RX_PHYS(rxd)	(u_long)AIX_REVERSE((rxd)->rxd_rbadr)

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_RX_USED)
  *	int HWM_GET_RX_USED(smc)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to get
  *		the count of used RXDs in receive queue 1.
  *
  * return	the used RXD count of receive queue 1
  *
  * NOTE: Remember, because of an ASIC bug at least one RXD should be unused
  *	 in the descriptor ring !
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_RX_USED(smc)	((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_used)

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_RX_FREE)
  *	int HWM_GET_RX_FREE(smc)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to get
  *		the rxd_free count of receive queue 1.
  *
  * return	the rxd_free count of receive queue 1
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_RX_FREE(smc)	((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_free-1)

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_GET_CURR_RXD)
  *	rxd *HWM_GET_CURR_RXD(smc)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro may be invoked by the OS-specific module to get the
  *		pointer to the RxD which points to the current queue put
  *		position.
  *
  * return	pointer to the current RxD
  *
  *	END_MANUAL_ENTRY
  */
 #define	HWM_GET_CURR_RXD(smc)	(struct s_smt_fp_rxd volatile *)\
 				(smc)->hw.fp.rx_q[QUEUE_R1].rx_curr_put

 /*
  *	BEGIN_MANUAL_ENTRY(HWM_RX_CHECK)
  *	void HWM_RX_CHECK(smc,low_water)
  *
  * function	MACRO		(hardware module, hwmtm.h)
  *		This macro is invoked by the OS-specific before it left the
  *		function mac_drv_rx_complete. This macro calls mac_drv_fill_rxd
  *		if the number of used RxDs is equal or lower than the
  *		the given low water mark.
  *
  * para	low_water	low water mark of used RxD's
  *
  *	END_MANUAL_ENTRY
  */
 #ifndef HWM_NO_FLOW_CTL
 #define	HWM_RX_CHECK(smc,low_water) {\
 	if ((low_water) >= (smc)->hw.fp.rx_q[QUEUE_R1].rx_used) {\
 		mac_drv_fill_rxd(smc) ;\
 	}\
 }
 #else
 #define	HWM_RX_CHECK(smc,low_water)		mac_drv_fill_rxd(smc)
 #endif

 #ifndef	HWM_EBASE
 #define	HWM_EBASE	500
 #endif

 #define	HWM_E0001	HWM_EBASE + 1
 #define	HWM_E0001_MSG	"HWM: Wrong size of s_rxd_os struct"
 #define	HWM_E0002	HWM_EBASE + 2
 #define	HWM_E0002_MSG	"HWM: Wrong size of s_txd_os struct"
 #define	HWM_E0003	HWM_EBASE + 3
 #define	HWM_E0003_MSG	"HWM: smt_free_mbuf() called with NULL pointer"
 #define	HWM_E0004	HWM_EBASE + 4
 #define	HWM_E0004_MSG	"HWM: Parity error rx queue 1"
 #define	HWM_E0005	HWM_EBASE + 5
 #define	HWM_E0005_MSG	"HWM: Encoding error rx queue 1"
 #define	HWM_E0006	HWM_EBASE + 6
 #define	HWM_E0006_MSG	"HWM: Encoding error async tx queue"
 #define	HWM_E0007	HWM_EBASE + 7
 #define	HWM_E0007_MSG	"HWM: Encoding error sync tx queue"
 #define	HWM_E0008	HWM_EBASE + 8
 #define	HWM_E0008_MSG	""
 #define	HWM_E0009	HWM_EBASE + 9
 #define	HWM_E0009_MSG	"HWM: Out of RxD condition detected"
 #define	HWM_E0010	HWM_EBASE + 10
 #define	HWM_E0010_MSG	"HWM: A protocol layer has tried to send a frame with an invalid frame control"
 #define HWM_E0011	HWM_EBASE + 11
 #define HWM_E0011_MSG	"HWM: mac_drv_clear_tx_queue was called although the hardware wasn't stopped"
 #define HWM_E0012	HWM_EBASE + 12
 #define HWM_E0012_MSG	"HWM: mac_drv_clear_rx_queue was called although the hardware wasn't stopped"
 #define HWM_E0013	HWM_EBASE + 13
 #define HWM_E0013_MSG	"HWM: mac_drv_repair_descr was called although the hardware wasn't stopped"

 #endif
	/******************************************************************************
	*
	* (C)Copyright 1998,1999 SysKonnect,
	* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* The information in this file is provided "AS IS" without warranty.
	*
	******************************************************************************/

	#ifndef _HWM_
	#define _HWM_

	#include "mbuf.h"

	/*
	* MACRO for DMA synchronization:
	* The descriptor 'desc' is flushed for the device 'flag'.
	* Devices are the CPU (DDI_DMA_SYNC_FORCPU) and the
	* adapter (DDI_DMA_SYNC_FORDEV).
	*
	* 'desc' Pointer to a Rx or Tx descriptor.
	* 'flag' Flag for direction (view for CPU or DEVICE) that
	* should be synchronized.
	*
	* Empty macros and defines are specified here. The real macro
	* is os-specific and should be defined in osdef1st.h.
	*/
	#ifndef DRV_BUF_FLUSH
	#define DRV_BUF_FLUSH(desc,flag)
	#define DDI_DMA_SYNC_FORCPU
	#define DDI_DMA_SYNC_FORDEV
	#endif

	/*
	* hardware modul dependent receive modes
	*/
	#define RX_ENABLE_PASS_SMT 21
	#define RX_DISABLE_PASS_SMT 22
	#define RX_ENABLE_PASS_NSA 23
	#define RX_DISABLE_PASS_NSA 24
	#define RX_ENABLE_PASS_DB 25
	#define RX_DISABLE_PASS_DB 26
	#define RX_DISABLE_PASS_ALL 27
	#define RX_DISABLE_LLC_PROMISC 28
	#define RX_ENABLE_LLC_PROMISC 29


	#ifndef DMA_RD
	#define DMA_RD 1 /* memory -> hw */
	#endif
	#ifndef DMA_WR
	#define DMA_WR 2 /* hw -> memory */
	#endif
	#define SMT_BUF 0x80

	/*
	* bits of the frame status byte
	*/
	#define EN_IRQ_EOF 0x02 /* get IRQ after end of frame transmission */
	#define LOC_TX 0x04 /* send frame to the local SMT */
	#define LAST_FRAG 0x08 /* last TxD of the frame */
	#define FIRST_FRAG 0x10 /* first TxD of the frame */
	#define LAN_TX 0x20 /* send frame to network if set */
	#define RING_DOWN 0x40 /* error: unable to send, ring down */
	#define OUT_OF_TXD 0x80 /* error: not enough TxDs available */


	#ifndef NULL
	#define NULL 0
	#endif

	#define C_INDIC (1L<<25)
	#define A_INDIC (1L<<26)
	#define RD_FS_LOCAL 0x80

	/*
	* DEBUG FLAGS
	*/
	#define DEBUG_SMTF 1
	#define DEBUG_SMT 2
	#define DEBUG_ECM 3
	#define DEBUG_RMT 4
	#define DEBUG_CFM 5
	#define DEBUG_PCM 6
	#define DEBUG_SBA 7
	#define DEBUG_ESS 8

	#define DB_HWM_RX 10
	#define DB_HWM_TX 11
	#define DB_HWM_GEN 12

	struct s_mbuf_pool {
	#ifndef MB_OUTSIDE_SMC
	SMbuf mb[MAX_MBUF] ; /* mbuf pool */
	#endif
	SMbuf mb_start ; / points to the first mb */
	SMbuf mb_free ; / free queue */
	} ;

	struct hwm_r {
	/*
	* hardware modul specific receive variables
	*/
	u_int len ; /* length of the whole frame */
	char mb_pos ; / SMbuf receive position */
	} ;

	struct hw_modul {
	/*
	* All hardware modul specific variables
	*/
	struct s_mbuf_pool mbuf_pool ;
	struct hwm_r r ;

	union s_fp_descr volatile descr_p ; / points to the desriptor area */

	u_short pass_SMT ; /* pass SMT frames */
	u_short pass_NSA ; /* pass all NSA frames */
	u_short pass_DB ; /* pass Direct Beacon Frames */
	u_short pass_llc_promisc ; /* pass all llc frames (default ON) */

	SMbuf llc_rx_pipe ; / points to the first queued llc fr */
	SMbuf llc_rx_tail ; / points to the last queued llc fr */
	int queued_rx_frames ; /* number of queued frames */

	SMbuf txd_tx_pipe ; / points to first mb in the txd ring */
	SMbuf txd_tx_tail ; / points to last mb in the txd ring */
	int queued_txd_mb ; /* number of SMT MBufs in txd ring */

	int rx_break ; /* rev. was breaked because ind. off */
	int leave_isr ; /* leave fddi_isr immedeately if set */
	int isr_flag ; /* set, when HWM is entered from isr */
	/*
	* variables for the current transmit frame
	*/
	struct s_smt_tx_queue tx_p ; / pointer to the transmit queue */
	u_long tx_descr ; /* tx descriptor for FORMAC+ */
	int tx_len ; /* tx frame length */
	SMbuf tx_mb ; / SMT tx MBuf pointer */
	char tx_data ; / data pointer to the SMT tx Mbuf */

	int detec_count ; /* counter for out of RxD condition */
	u_long rx_len_error ; /* rx len FORMAC != sum of fragments */
	} ;


	/*
	* DEBUG structs and macros
	*/

	#ifdef DEBUG
	struct os_debug {
	int hwm_rx ;
	int hwm_tx ;
	int hwm_gen ;
	} ;
	#endif

	#ifdef DEBUG
	#ifdef DEBUG_BRD
	#define DB_P smc->debug
	#else
	#define DB_P debug
	#endif

	#define DB_RX(lev, fmt, ...) \
	do { \
	if (DB_P.d_os.hwm_rx >= (lev)) \
	printf(fmt "\n", ##__VA_ARGS__); \
	} while (0)
	#define DB_TX(lev, fmt, ...) \
	do { \
	if (DB_P.d_os.hwm_tx >= (lev)) \
	printf(fmt "\n", ##__VA_ARGS__); \
	} while (0)
	#define DB_GEN(lev, fmt, ...) \
	do { \
	if (DB_P.d_os.hwm_gen >= (lev)) \
	printf(fmt "\n", ##__VA_ARGS__); \
	} while (0)
	#else /* DEBUG */
	#define DB_RX(lev, fmt, ...) no_printk(fmt "\n", ##__VA_ARGS__)
	#define DB_TX(lev, fmt, ...) no_printk(fmt "\n", ##__VA_ARGS__)
	#define DB_GEN(lev, fmt, ...) no_printk(fmt "\n", ##__VA_ARGS__)
	#endif /* DEBUG */

	#ifndef SK_BREAK
	#define SK_BREAK()
	#endif


	/*
	* HWM Macros
	*/

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_TX_PHYS)
	* u_long HWM_GET_TX_PHYS(txd)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to read
	* the physical address of the specified TxD.
	*
	* para txd pointer to the TxD
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_TX_PHYS(txd) (u_long)AIX_REVERSE((txd)->txd_tbadr)

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_TX_LEN)
	* int HWM_GET_TX_LEN(txd)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to read
	* the fragment length of the specified TxD
	*
	* para rxd pointer to the TxD
	*
	* return the length of the fragment in bytes
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_TX_LEN(txd) ((int)AIX_REVERSE((txd)->txd_tbctrl)& RD_LENGTH)

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_TX_USED)
	* txd *HWM_GET_TX_USED(smc,queue)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to get the
	* number of used TxDs for the queue, specified by the index.
	*
	* para queue the number of the send queue: Can be specified by
	* QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
	*
	* return number of used TxDs for this send queue
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_TX_USED(smc,queue) (int) (smc)->hw.fp.tx_q[queue].tx_used

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_CURR_TXD)
	* txd *HWM_GET_CURR_TXD(smc,queue)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to get the
	* pointer to the TxD which points to the current queue put
	* position.
	*
	* para queue the number of the send queue: Can be specified by
	* QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0)
	*
	* return pointer to the current TxD
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_CURR_TXD(smc,queue) (struct s_smt_fp_txd volatile *)\
	(smc)->hw.fp.tx_q[queue].tx_curr_put

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_RX_FRAG_LEN)
	* int HWM_GET_RX_FRAG_LEN(rxd)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to read
	* the fragment length of the specified RxD
	*
	* para rxd pointer to the RxD
	*
	* return the length of the fragment in bytes
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_RX_FRAG_LEN(rxd) ((int)AIX_REVERSE((rxd)->rxd_rbctrl)& \
	RD_LENGTH)

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_RX_PHYS)
	* u_long HWM_GET_RX_PHYS(rxd)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to read
	* the physical address of the specified RxD.
	*
	* para rxd pointer to the RxD
	*
	* return the RxD's physical pointer to the data fragment
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_RX_PHYS(rxd) (u_long)AIX_REVERSE((rxd)->rxd_rbadr)

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_RX_USED)
	* int HWM_GET_RX_USED(smc)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to get
	* the count of used RXDs in receive queue 1.
	*
	* return the used RXD count of receive queue 1
	*
	* NOTE: Remember, because of an ASIC bug at least one RXD should be unused
	* in the descriptor ring !
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_RX_USED(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_used)

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_RX_FREE)
	* int HWM_GET_RX_FREE(smc)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to get
	* the rxd_free count of receive queue 1.
	*
	* return the rxd_free count of receive queue 1
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_RX_FREE(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_free-1)

	/*
	* BEGIN_MANUAL_ENTRY(HWM_GET_CURR_RXD)
	* rxd *HWM_GET_CURR_RXD(smc)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro may be invoked by the OS-specific module to get the
	* pointer to the RxD which points to the current queue put
	* position.
	*
	* return pointer to the current RxD
	*
	* END_MANUAL_ENTRY
	*/
	#define HWM_GET_CURR_RXD(smc) (struct s_smt_fp_rxd volatile *)\
	(smc)->hw.fp.rx_q[QUEUE_R1].rx_curr_put

	/*
	* BEGIN_MANUAL_ENTRY(HWM_RX_CHECK)
	* void HWM_RX_CHECK(smc,low_water)
	*
	* function MACRO (hardware module, hwmtm.h)
	* This macro is invoked by the OS-specific before it left the
	* function mac_drv_rx_complete. This macro calls mac_drv_fill_rxd
	* if the number of used RxDs is equal or lower than the
	* the given low water mark.
	*
	* para low_water low water mark of used RxD's
	*
	* END_MANUAL_ENTRY
	*/
	#ifndef HWM_NO_FLOW_CTL
	#define HWM_RX_CHECK(smc,low_water) {\
	if ((low_water) >= (smc)->hw.fp.rx_q[QUEUE_R1].rx_used) {\
	mac_drv_fill_rxd(smc) ;\
	}\
	}
	#else
	#define HWM_RX_CHECK(smc,low_water) mac_drv_fill_rxd(smc)
	#endif

	#ifndef HWM_EBASE
	#define HWM_EBASE 500
	#endif

	#define HWM_E0001 HWM_EBASE + 1
	#define HWM_E0001_MSG "HWM: Wrong size of s_rxd_os struct"
	#define HWM_E0002 HWM_EBASE + 2
	#define HWM_E0002_MSG "HWM: Wrong size of s_txd_os struct"
	#define HWM_E0003 HWM_EBASE + 3
	#define HWM_E0003_MSG "HWM: smt_free_mbuf() called with NULL pointer"
	#define HWM_E0004 HWM_EBASE + 4
	#define HWM_E0004_MSG "HWM: Parity error rx queue 1"
	#define HWM_E0005 HWM_EBASE + 5
	#define HWM_E0005_MSG "HWM: Encoding error rx queue 1"
	#define HWM_E0006 HWM_EBASE + 6
	#define HWM_E0006_MSG "HWM: Encoding error async tx queue"
	#define HWM_E0007 HWM_EBASE + 7
	#define HWM_E0007_MSG "HWM: Encoding error sync tx queue"
	#define HWM_E0008 HWM_EBASE + 8
	#define HWM_E0008_MSG ""
	#define HWM_E0009 HWM_EBASE + 9
	#define HWM_E0009_MSG "HWM: Out of RxD condition detected"
	#define HWM_E0010 HWM_EBASE + 10
	#define HWM_E0010_MSG "HWM: A protocol layer has tried to send a frame with an invalid frame control"
	#define HWM_E0011 HWM_EBASE + 11
	#define HWM_E0011_MSG "HWM: mac_drv_clear_tx_queue was called although the hardware wasn't stopped"
	#define HWM_E0012 HWM_EBASE + 12
	#define HWM_E0012_MSG "HWM: mac_drv_clear_rx_queue was called although the hardware wasn't stopped"
	#define HWM_E0013 HWM_EBASE + 13
	#define HWM_E0013_MSG "HWM: mac_drv_repair_descr was called although the hardware wasn't stopped"

	#endif