| /* |
| * Copyright (c) 2016, Linaro Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/slab.h> |
| #include <linux/rpmsg.h> |
| #include <linux/idr.h> |
| #include <linux/circ_buf.h> |
| #include <linux/soc/qcom/smem.h> |
| #include <linux/sizes.h> |
| #include <linux/delay.h> |
| #include <linux/regmap.h> |
| #include <linux/workqueue.h> |
| #include <linux/list.h> |
| |
| #include <linux/delay.h> |
| #include <linux/rpmsg.h> |
| #include <linux/rpmsg/qcom_glink.h> |
| |
| #include "qcom_glink_native.h" |
| |
| #define FIFO_FULL_RESERVE 8 |
| #define FIFO_ALIGNMENT 8 |
| #define TX_BLOCKED_CMD_RESERVE 8 /* size of struct read_notif_request */ |
| |
| #define SMEM_GLINK_NATIVE_XPRT_DESCRIPTOR 478 |
| #define SMEM_GLINK_NATIVE_XPRT_FIFO_0 479 |
| #define SMEM_GLINK_NATIVE_XPRT_FIFO_1 480 |
| |
| struct glink_smem_pipe { |
| struct qcom_glink_pipe native; |
| |
| __le32 *tail; |
| __le32 *head; |
| |
| void *fifo; |
| |
| int remote_pid; |
| }; |
| |
| #define to_smem_pipe(p) container_of(p, struct glink_smem_pipe, native) |
| |
| static size_t glink_smem_rx_avail(struct qcom_glink_pipe *np) |
| { |
| struct glink_smem_pipe *pipe = to_smem_pipe(np); |
| size_t len; |
| void *fifo; |
| u32 head; |
| u32 tail; |
| |
| if (!pipe->fifo) { |
| fifo = qcom_smem_get(pipe->remote_pid, |
| SMEM_GLINK_NATIVE_XPRT_FIFO_1, &len); |
| if (IS_ERR(fifo)) { |
| pr_err("failed to acquire RX fifo handle: %ld\n", |
| PTR_ERR(fifo)); |
| return 0; |
| } |
| |
| pipe->fifo = fifo; |
| pipe->native.length = len; |
| } |
| |
| head = le32_to_cpu(*pipe->head); |
| tail = le32_to_cpu(*pipe->tail); |
| |
| if (head < tail) |
| return pipe->native.length - tail + head; |
| else |
| return head - tail; |
| } |
| |
| static void glink_smem_rx_peak(struct qcom_glink_pipe *np, |
| void *data, unsigned int offset, size_t count) |
| { |
| struct glink_smem_pipe *pipe = to_smem_pipe(np); |
| size_t len; |
| u32 tail; |
| |
| tail = le32_to_cpu(*pipe->tail); |
| tail += offset; |
| if (tail >= pipe->native.length) |
| tail -= pipe->native.length; |
| |
| len = min_t(size_t, count, pipe->native.length - tail); |
| if (len) { |
| __ioread32_copy(data, pipe->fifo + tail, |
| len / sizeof(u32)); |
| } |
| |
| if (len != count) { |
| __ioread32_copy(data + len, pipe->fifo, |
| (count - len) / sizeof(u32)); |
| } |
| } |
| |
| static void glink_smem_rx_advance(struct qcom_glink_pipe *np, |
| size_t count) |
| { |
| struct glink_smem_pipe *pipe = to_smem_pipe(np); |
| u32 tail; |
| |
| tail = le32_to_cpu(*pipe->tail); |
| |
| tail += count; |
| if (tail > pipe->native.length) |
| tail -= pipe->native.length; |
| |
| *pipe->tail = cpu_to_le32(tail); |
| } |
| |
| static size_t glink_smem_tx_avail(struct qcom_glink_pipe *np) |
| { |
| struct glink_smem_pipe *pipe = to_smem_pipe(np); |
| u32 head; |
| u32 tail; |
| u32 avail; |
| |
| head = le32_to_cpu(*pipe->head); |
| tail = le32_to_cpu(*pipe->tail); |
| |
| if (tail <= head) |
| avail = pipe->native.length - head + tail; |
| else |
| avail = tail - head; |
| |
| if (avail < (FIFO_FULL_RESERVE + TX_BLOCKED_CMD_RESERVE)) |
| avail = 0; |
| else |
| avail -= FIFO_FULL_RESERVE + TX_BLOCKED_CMD_RESERVE; |
| |
| return avail; |
| } |
| |
| static unsigned int glink_smem_tx_write_one(struct glink_smem_pipe *pipe, |
| unsigned int head, |
| const void *data, size_t count) |
| { |
| size_t len; |
| |
| len = min_t(size_t, count, pipe->native.length - head); |
| if (len) |
| memcpy(pipe->fifo + head, data, len); |
| |
| if (len != count) |
| memcpy(pipe->fifo, data + len, count - len); |
| |
| head += count; |
| if (head >= pipe->native.length) |
| head -= pipe->native.length; |
| |
| return head; |
| } |
| |
| static void glink_smem_tx_write(struct qcom_glink_pipe *glink_pipe, |
| const void *hdr, size_t hlen, |
| const void *data, size_t dlen) |
| { |
| struct glink_smem_pipe *pipe = to_smem_pipe(glink_pipe); |
| unsigned int head; |
| |
| head = le32_to_cpu(*pipe->head); |
| |
| head = glink_smem_tx_write_one(pipe, head, hdr, hlen); |
| head = glink_smem_tx_write_one(pipe, head, data, dlen); |
| |
| /* Ensure head is always aligned to 8 bytes */ |
| head = ALIGN(head, 8); |
| if (head >= pipe->native.length) |
| head -= pipe->native.length; |
| |
| *pipe->head = cpu_to_le32(head); |
| } |
| |
| static void qcom_glink_smem_release(struct device *dev) |
| { |
| kfree(dev); |
| } |
| |
| struct qcom_glink *qcom_glink_smem_register(struct device *parent, |
| struct device_node *node) |
| { |
| struct glink_smem_pipe *rx_pipe; |
| struct glink_smem_pipe *tx_pipe; |
| struct qcom_glink *glink; |
| struct device *dev; |
| u32 remote_pid; |
| __le32 *descs; |
| size_t size; |
| int ret; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return ERR_PTR(-ENOMEM); |
| |
| dev->parent = parent; |
| dev->of_node = node; |
| dev->release = qcom_glink_smem_release; |
| dev_set_name(dev, "%s:%s", node->parent->name, node->name); |
| ret = device_register(dev); |
| if (ret) { |
| pr_err("failed to register glink edge\n"); |
| return ERR_PTR(ret); |
| } |
| |
| ret = of_property_read_u32(dev->of_node, "qcom,remote-pid", |
| &remote_pid); |
| if (ret) { |
| dev_err(dev, "failed to parse qcom,remote-pid\n"); |
| goto err_put_dev; |
| } |
| |
| rx_pipe = devm_kzalloc(dev, sizeof(*rx_pipe), GFP_KERNEL); |
| tx_pipe = devm_kzalloc(dev, sizeof(*tx_pipe), GFP_KERNEL); |
| if (!rx_pipe || !tx_pipe) { |
| ret = -ENOMEM; |
| goto err_put_dev; |
| } |
| |
| ret = qcom_smem_alloc(remote_pid, |
| SMEM_GLINK_NATIVE_XPRT_DESCRIPTOR, 32); |
| if (ret && ret != -EEXIST) { |
| dev_err(dev, "failed to allocate glink descriptors\n"); |
| goto err_put_dev; |
| } |
| |
| descs = qcom_smem_get(remote_pid, |
| SMEM_GLINK_NATIVE_XPRT_DESCRIPTOR, &size); |
| if (IS_ERR(descs)) { |
| dev_err(dev, "failed to acquire xprt descriptor\n"); |
| ret = PTR_ERR(descs); |
| goto err_put_dev; |
| } |
| |
| if (size != 32) { |
| dev_err(dev, "glink descriptor of invalid size\n"); |
| ret = -EINVAL; |
| goto err_put_dev; |
| } |
| |
| tx_pipe->tail = &descs[0]; |
| tx_pipe->head = &descs[1]; |
| rx_pipe->tail = &descs[2]; |
| rx_pipe->head = &descs[3]; |
| |
| ret = qcom_smem_alloc(remote_pid, SMEM_GLINK_NATIVE_XPRT_FIFO_0, |
| SZ_16K); |
| if (ret && ret != -EEXIST) { |
| dev_err(dev, "failed to allocate TX fifo\n"); |
| goto err_put_dev; |
| } |
| |
| tx_pipe->fifo = qcom_smem_get(remote_pid, SMEM_GLINK_NATIVE_XPRT_FIFO_0, |
| &tx_pipe->native.length); |
| if (IS_ERR(tx_pipe->fifo)) { |
| dev_err(dev, "failed to acquire TX fifo\n"); |
| ret = PTR_ERR(tx_pipe->fifo); |
| goto err_put_dev; |
| } |
| |
| rx_pipe->native.avail = glink_smem_rx_avail; |
| rx_pipe->native.peak = glink_smem_rx_peak; |
| rx_pipe->native.advance = glink_smem_rx_advance; |
| rx_pipe->remote_pid = remote_pid; |
| |
| tx_pipe->native.avail = glink_smem_tx_avail; |
| tx_pipe->native.write = glink_smem_tx_write; |
| tx_pipe->remote_pid = remote_pid; |
| |
| *rx_pipe->tail = 0; |
| *tx_pipe->head = 0; |
| |
| glink = qcom_glink_native_probe(dev, |
| GLINK_FEATURE_INTENT_REUSE, |
| &rx_pipe->native, &tx_pipe->native, |
| false); |
| if (IS_ERR(glink)) { |
| ret = PTR_ERR(glink); |
| goto err_put_dev; |
| } |
| |
| return glink; |
| |
| err_put_dev: |
| put_device(dev); |
| |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(qcom_glink_smem_register); |
| |
| void qcom_glink_smem_unregister(struct qcom_glink *glink) |
| { |
| qcom_glink_native_remove(glink); |
| qcom_glink_native_unregister(glink); |
| } |
| EXPORT_SYMBOL_GPL(qcom_glink_smem_unregister); |
| |
| MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@linaro.org>"); |
| MODULE_DESCRIPTION("Qualcomm GLINK SMEM driver"); |
| MODULE_LICENSE("GPL v2"); |