| /* |
| * emc6w201.c - Hardware monitoring driver for the SMSC EMC6W201 |
| * Copyright (C) 2011 Jean Delvare <jdelvare@suse.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| |
| /* |
| * Addresses to scan |
| */ |
| |
| static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; |
| |
| /* |
| * The EMC6W201 registers |
| */ |
| |
| #define EMC6W201_REG_IN(nr) (0x20 + (nr)) |
| #define EMC6W201_REG_TEMP(nr) (0x26 + (nr)) |
| #define EMC6W201_REG_FAN(nr) (0x2C + (nr) * 2) |
| #define EMC6W201_REG_COMPANY 0x3E |
| #define EMC6W201_REG_VERSTEP 0x3F |
| #define EMC6W201_REG_CONFIG 0x40 |
| #define EMC6W201_REG_IN_LOW(nr) (0x4A + (nr) * 2) |
| #define EMC6W201_REG_IN_HIGH(nr) (0x4B + (nr) * 2) |
| #define EMC6W201_REG_TEMP_LOW(nr) (0x56 + (nr) * 2) |
| #define EMC6W201_REG_TEMP_HIGH(nr) (0x57 + (nr) * 2) |
| #define EMC6W201_REG_FAN_MIN(nr) (0x62 + (nr) * 2) |
| |
| enum subfeature { input, min, max }; |
| |
| /* |
| * Per-device data |
| */ |
| |
| struct emc6w201_data { |
| struct i2c_client *client; |
| struct mutex update_lock; |
| char valid; /* zero until following fields are valid */ |
| unsigned long last_updated; /* in jiffies */ |
| |
| /* registers values */ |
| u8 in[3][6]; |
| s8 temp[3][6]; |
| u16 fan[2][5]; |
| }; |
| |
| /* |
| * Combine LSB and MSB registers in a single value |
| * Locking: must be called with data->update_lock held |
| */ |
| static u16 emc6w201_read16(struct i2c_client *client, u8 reg) |
| { |
| int lsb, msb; |
| |
| lsb = i2c_smbus_read_byte_data(client, reg); |
| msb = i2c_smbus_read_byte_data(client, reg + 1); |
| if (unlikely(lsb < 0 || msb < 0)) { |
| dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", |
| 16, "read", reg); |
| return 0xFFFF; /* Arbitrary value */ |
| } |
| |
| return (msb << 8) | lsb; |
| } |
| |
| /* |
| * Write 16-bit value to LSB and MSB registers |
| * Locking: must be called with data->update_lock held |
| */ |
| static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val) |
| { |
| int err; |
| |
| err = i2c_smbus_write_byte_data(client, reg, val & 0xff); |
| if (likely(!err)) |
| err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8); |
| if (unlikely(err < 0)) |
| dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", |
| 16, "write", reg); |
| |
| return err; |
| } |
| |
| /* Read 8-bit value from register */ |
| static u8 emc6w201_read8(struct i2c_client *client, u8 reg) |
| { |
| int val; |
| |
| val = i2c_smbus_read_byte_data(client, reg); |
| if (unlikely(val < 0)) { |
| dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", |
| 8, "read", reg); |
| return 0x00; /* Arbitrary value */ |
| } |
| |
| return val; |
| } |
| |
| /* Write 8-bit value to register */ |
| static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val) |
| { |
| int err; |
| |
| err = i2c_smbus_write_byte_data(client, reg, val); |
| if (unlikely(err < 0)) |
| dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", |
| 8, "write", reg); |
| |
| return err; |
| } |
| |
| static struct emc6w201_data *emc6w201_update_device(struct device *dev) |
| { |
| struct emc6w201_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| int nr; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { |
| for (nr = 0; nr < 6; nr++) { |
| data->in[input][nr] = |
| emc6w201_read8(client, |
| EMC6W201_REG_IN(nr)); |
| data->in[min][nr] = |
| emc6w201_read8(client, |
| EMC6W201_REG_IN_LOW(nr)); |
| data->in[max][nr] = |
| emc6w201_read8(client, |
| EMC6W201_REG_IN_HIGH(nr)); |
| } |
| |
| for (nr = 0; nr < 6; nr++) { |
| data->temp[input][nr] = |
| emc6w201_read8(client, |
| EMC6W201_REG_TEMP(nr)); |
| data->temp[min][nr] = |
| emc6w201_read8(client, |
| EMC6W201_REG_TEMP_LOW(nr)); |
| data->temp[max][nr] = |
| emc6w201_read8(client, |
| EMC6W201_REG_TEMP_HIGH(nr)); |
| } |
| |
| for (nr = 0; nr < 5; nr++) { |
| data->fan[input][nr] = |
| emc6w201_read16(client, |
| EMC6W201_REG_FAN(nr)); |
| data->fan[min][nr] = |
| emc6w201_read16(client, |
| EMC6W201_REG_FAN_MIN(nr)); |
| } |
| |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| /* |
| * Sysfs callback functions |
| */ |
| |
| static const s16 nominal_mv[6] = { 2500, 1500, 3300, 5000, 1500, 1500 }; |
| |
| static ssize_t show_in(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct emc6w201_data *data = emc6w201_update_device(dev); |
| int sf = to_sensor_dev_attr_2(devattr)->index; |
| int nr = to_sensor_dev_attr_2(devattr)->nr; |
| |
| return sprintf(buf, "%u\n", |
| (unsigned)data->in[sf][nr] * nominal_mv[nr] / 0xC0); |
| } |
| |
| static ssize_t set_in(struct device *dev, struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct emc6w201_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| int sf = to_sensor_dev_attr_2(devattr)->index; |
| int nr = to_sensor_dev_attr_2(devattr)->nr; |
| int err; |
| long val; |
| u8 reg; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| val = DIV_ROUND_CLOSEST(val * 0xC0, nominal_mv[nr]); |
| reg = (sf == min) ? EMC6W201_REG_IN_LOW(nr) |
| : EMC6W201_REG_IN_HIGH(nr); |
| |
| mutex_lock(&data->update_lock); |
| data->in[sf][nr] = clamp_val(val, 0, 255); |
| err = emc6w201_write8(client, reg, data->in[sf][nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct emc6w201_data *data = emc6w201_update_device(dev); |
| int sf = to_sensor_dev_attr_2(devattr)->index; |
| int nr = to_sensor_dev_attr_2(devattr)->nr; |
| |
| return sprintf(buf, "%d\n", (int)data->temp[sf][nr] * 1000); |
| } |
| |
| static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct emc6w201_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| int sf = to_sensor_dev_attr_2(devattr)->index; |
| int nr = to_sensor_dev_attr_2(devattr)->nr; |
| int err; |
| long val; |
| u8 reg; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| val /= 1000; |
| reg = (sf == min) ? EMC6W201_REG_TEMP_LOW(nr) |
| : EMC6W201_REG_TEMP_HIGH(nr); |
| |
| mutex_lock(&data->update_lock); |
| data->temp[sf][nr] = clamp_val(val, -127, 128); |
| err = emc6w201_write8(client, reg, data->temp[sf][nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct emc6w201_data *data = emc6w201_update_device(dev); |
| int sf = to_sensor_dev_attr_2(devattr)->index; |
| int nr = to_sensor_dev_attr_2(devattr)->nr; |
| unsigned rpm; |
| |
| if (data->fan[sf][nr] == 0 || data->fan[sf][nr] == 0xFFFF) |
| rpm = 0; |
| else |
| rpm = 5400000U / data->fan[sf][nr]; |
| |
| return sprintf(buf, "%u\n", rpm); |
| } |
| |
| static ssize_t set_fan(struct device *dev, struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct emc6w201_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| int sf = to_sensor_dev_attr_2(devattr)->index; |
| int nr = to_sensor_dev_attr_2(devattr)->nr; |
| int err; |
| unsigned long val; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err < 0) |
| return err; |
| |
| if (val == 0) { |
| val = 0xFFFF; |
| } else { |
| val = DIV_ROUND_CLOSEST(5400000U, val); |
| val = clamp_val(val, 0, 0xFFFE); |
| } |
| |
| mutex_lock(&data->update_lock); |
| data->fan[sf][nr] = val; |
| err = emc6w201_write16(client, EMC6W201_REG_FAN_MIN(nr), |
| data->fan[sf][nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return err < 0 ? err : count; |
| } |
| |
| static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, input); |
| static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 0, min); |
| static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 0, max); |
| static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, input); |
| static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 1, min); |
| static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 1, max); |
| static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, input); |
| static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 2, min); |
| static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 2, max); |
| static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, input); |
| static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 3, min); |
| static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 3, max); |
| static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, input); |
| static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 4, min); |
| static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 4, max); |
| static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 5, input); |
| static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_in, set_in, |
| 5, min); |
| static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_in, set_in, |
| 5, max); |
| |
| static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, input); |
| static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 0, min); |
| static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 0, max); |
| static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 1, input); |
| static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 1, min); |
| static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 1, max); |
| static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 2, input); |
| static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 2, min); |
| static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 2, max); |
| static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, input); |
| static SENSOR_DEVICE_ATTR_2(temp4_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 3, min); |
| static SENSOR_DEVICE_ATTR_2(temp4_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 3, max); |
| static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, input); |
| static SENSOR_DEVICE_ATTR_2(temp5_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 4, min); |
| static SENSOR_DEVICE_ATTR_2(temp5_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 4, max); |
| static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, input); |
| static SENSOR_DEVICE_ATTR_2(temp6_min, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 5, min); |
| static SENSOR_DEVICE_ATTR_2(temp6_max, S_IRUGO | S_IWUSR, show_temp, set_temp, |
| 5, max); |
| |
| static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, input); |
| static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 0, min); |
| static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 1, input); |
| static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 1, min); |
| static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 2, input); |
| static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 2, min); |
| static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 3, input); |
| static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 3, min); |
| static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, input); |
| static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan, |
| 4, min); |
| |
| static struct attribute *emc6w201_attrs[] = { |
| &sensor_dev_attr_in0_input.dev_attr.attr, |
| &sensor_dev_attr_in0_min.dev_attr.attr, |
| &sensor_dev_attr_in0_max.dev_attr.attr, |
| &sensor_dev_attr_in1_input.dev_attr.attr, |
| &sensor_dev_attr_in1_min.dev_attr.attr, |
| &sensor_dev_attr_in1_max.dev_attr.attr, |
| &sensor_dev_attr_in2_input.dev_attr.attr, |
| &sensor_dev_attr_in2_min.dev_attr.attr, |
| &sensor_dev_attr_in2_max.dev_attr.attr, |
| &sensor_dev_attr_in3_input.dev_attr.attr, |
| &sensor_dev_attr_in3_min.dev_attr.attr, |
| &sensor_dev_attr_in3_max.dev_attr.attr, |
| &sensor_dev_attr_in4_input.dev_attr.attr, |
| &sensor_dev_attr_in4_min.dev_attr.attr, |
| &sensor_dev_attr_in4_max.dev_attr.attr, |
| &sensor_dev_attr_in5_input.dev_attr.attr, |
| &sensor_dev_attr_in5_min.dev_attr.attr, |
| &sensor_dev_attr_in5_max.dev_attr.attr, |
| |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_min.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_min.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_min.dev_attr.attr, |
| &sensor_dev_attr_temp3_max.dev_attr.attr, |
| &sensor_dev_attr_temp4_input.dev_attr.attr, |
| &sensor_dev_attr_temp4_min.dev_attr.attr, |
| &sensor_dev_attr_temp4_max.dev_attr.attr, |
| &sensor_dev_attr_temp5_input.dev_attr.attr, |
| &sensor_dev_attr_temp5_min.dev_attr.attr, |
| &sensor_dev_attr_temp5_max.dev_attr.attr, |
| &sensor_dev_attr_temp6_input.dev_attr.attr, |
| &sensor_dev_attr_temp6_min.dev_attr.attr, |
| &sensor_dev_attr_temp6_max.dev_attr.attr, |
| |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| &sensor_dev_attr_fan1_min.dev_attr.attr, |
| &sensor_dev_attr_fan2_input.dev_attr.attr, |
| &sensor_dev_attr_fan2_min.dev_attr.attr, |
| &sensor_dev_attr_fan3_input.dev_attr.attr, |
| &sensor_dev_attr_fan3_min.dev_attr.attr, |
| &sensor_dev_attr_fan4_input.dev_attr.attr, |
| &sensor_dev_attr_fan4_min.dev_attr.attr, |
| &sensor_dev_attr_fan5_input.dev_attr.attr, |
| &sensor_dev_attr_fan5_min.dev_attr.attr, |
| NULL |
| }; |
| |
| ATTRIBUTE_GROUPS(emc6w201); |
| |
| /* |
| * Driver interface |
| */ |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int emc6w201_detect(struct i2c_client *client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = client->adapter; |
| int company, verstep, config; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| /* Identification */ |
| company = i2c_smbus_read_byte_data(client, EMC6W201_REG_COMPANY); |
| if (company != 0x5C) |
| return -ENODEV; |
| verstep = i2c_smbus_read_byte_data(client, EMC6W201_REG_VERSTEP); |
| if (verstep < 0 || (verstep & 0xF0) != 0xB0) |
| return -ENODEV; |
| if ((verstep & 0x0F) > 2) { |
| dev_dbg(&client->dev, "Unknwown EMC6W201 stepping %d\n", |
| verstep & 0x0F); |
| return -ENODEV; |
| } |
| |
| /* Check configuration */ |
| config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG); |
| if (config < 0 || (config & 0xF4) != 0x04) |
| return -ENODEV; |
| if (!(config & 0x01)) { |
| dev_err(&client->dev, "Monitoring not enabled\n"); |
| return -ENODEV; |
| } |
| |
| strlcpy(info->type, "emc6w201", I2C_NAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int emc6w201_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| struct emc6w201_data *data; |
| struct device *hwmon_dev; |
| |
| data = devm_kzalloc(dev, sizeof(struct emc6w201_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->client = client; |
| mutex_init(&data->update_lock); |
| |
| hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, |
| data, |
| emc6w201_groups); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct i2c_device_id emc6w201_id[] = { |
| { "emc6w201", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, emc6w201_id); |
| |
| static struct i2c_driver emc6w201_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = "emc6w201", |
| }, |
| .probe = emc6w201_probe, |
| .id_table = emc6w201_id, |
| .detect = emc6w201_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(emc6w201_driver); |
| |
| MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); |
| MODULE_DESCRIPTION("SMSC EMC6W201 hardware monitoring driver"); |
| MODULE_LICENSE("GPL"); |