| /* | |
| * SuperH Timer Support - CMT | |
| * | |
| * Copyright (C) 2008 Magnus Damm | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ioport.h> | |
| #include <linux/io.h> | |
| #include <linux/clk.h> | |
| #include <linux/irq.h> | |
| #include <linux/err.h> | |
| #include <linux/delay.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/sh_timer.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/pm_domain.h> | |
| #include <linux/pm_runtime.h> | |
| struct sh_cmt_priv { | |
| void __iomem *mapbase; | |
| void __iomem *mapbase_str; | |
| struct clk *clk; | |
| unsigned long width; /* 16 or 32 bit version of hardware block */ | |
| unsigned long overflow_bit; | |
| unsigned long clear_bits; | |
| struct irqaction irqaction; | |
| struct platform_device *pdev; | |
| unsigned long flags; | |
| unsigned long match_value; | |
| unsigned long next_match_value; | |
| unsigned long max_match_value; | |
| unsigned long rate; | |
| raw_spinlock_t lock; | |
| struct clock_event_device ced; | |
| struct clocksource cs; | |
| unsigned long total_cycles; | |
| bool cs_enabled; | |
| /* callbacks for CMSTR and CMCSR access */ | |
| unsigned long (*read_control)(void __iomem *base, unsigned long offs); | |
| void (*write_control)(void __iomem *base, unsigned long offs, | |
| unsigned long value); | |
| /* callbacks for CMCNT and CMCOR access */ | |
| unsigned long (*read_count)(void __iomem *base, unsigned long offs); | |
| void (*write_count)(void __iomem *base, unsigned long offs, | |
| unsigned long value); | |
| }; | |
| /* Examples of supported CMT timer register layouts and I/O access widths: | |
| * | |
| * "16-bit counter and 16-bit control" as found on sh7263: | |
| * CMSTR 0xfffec000 16-bit | |
| * CMCSR 0xfffec002 16-bit | |
| * CMCNT 0xfffec004 16-bit | |
| * CMCOR 0xfffec006 16-bit | |
| * | |
| * "32-bit counter and 16-bit control" as found on sh7372, sh73a0, r8a7740: | |
| * CMSTR 0xffca0000 16-bit | |
| * CMCSR 0xffca0060 16-bit | |
| * CMCNT 0xffca0064 32-bit | |
| * CMCOR 0xffca0068 32-bit | |
| * | |
| * "32-bit counter and 32-bit control" as found on r8a73a4 and r8a7790: | |
| * CMSTR 0xffca0500 32-bit | |
| * CMCSR 0xffca0510 32-bit | |
| * CMCNT 0xffca0514 32-bit | |
| * CMCOR 0xffca0518 32-bit | |
| */ | |
| static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs) | |
| { | |
| return ioread16(base + (offs << 1)); | |
| } | |
| static unsigned long sh_cmt_read32(void __iomem *base, unsigned long offs) | |
| { | |
| return ioread32(base + (offs << 2)); | |
| } | |
| static void sh_cmt_write16(void __iomem *base, unsigned long offs, | |
| unsigned long value) | |
| { | |
| iowrite16(value, base + (offs << 1)); | |
| } | |
| static void sh_cmt_write32(void __iomem *base, unsigned long offs, | |
| unsigned long value) | |
| { | |
| iowrite32(value, base + (offs << 2)); | |
| } | |
| #define CMCSR 0 /* channel register */ | |
| #define CMCNT 1 /* channel register */ | |
| #define CMCOR 2 /* channel register */ | |
| static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p) | |
| { | |
| return p->read_control(p->mapbase_str, 0); | |
| } | |
| static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p) | |
| { | |
| return p->read_control(p->mapbase, CMCSR); | |
| } | |
| static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p) | |
| { | |
| return p->read_count(p->mapbase, CMCNT); | |
| } | |
| static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p, | |
| unsigned long value) | |
| { | |
| p->write_control(p->mapbase_str, 0, value); | |
| } | |
| static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p, | |
| unsigned long value) | |
| { | |
| p->write_control(p->mapbase, CMCSR, value); | |
| } | |
| static inline void sh_cmt_write_cmcnt(struct sh_cmt_priv *p, | |
| unsigned long value) | |
| { | |
| p->write_count(p->mapbase, CMCNT, value); | |
| } | |
| static inline void sh_cmt_write_cmcor(struct sh_cmt_priv *p, | |
| unsigned long value) | |
| { | |
| p->write_count(p->mapbase, CMCOR, value); | |
| } | |
| static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p, | |
| int *has_wrapped) | |
| { | |
| unsigned long v1, v2, v3; | |
| int o1, o2; | |
| o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit; | |
| /* Make sure the timer value is stable. Stolen from acpi_pm.c */ | |
| do { | |
| o2 = o1; | |
| v1 = sh_cmt_read_cmcnt(p); | |
| v2 = sh_cmt_read_cmcnt(p); | |
| v3 = sh_cmt_read_cmcnt(p); | |
| o1 = sh_cmt_read_cmcsr(p) & p->overflow_bit; | |
| } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3) | |
| || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2))); | |
| *has_wrapped = o1; | |
| return v2; | |
| } | |
| static DEFINE_RAW_SPINLOCK(sh_cmt_lock); | |
| static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start) | |
| { | |
| struct sh_timer_config *cfg = p->pdev->dev.platform_data; | |
| unsigned long flags, value; | |
| /* start stop register shared by multiple timer channels */ | |
| raw_spin_lock_irqsave(&sh_cmt_lock, flags); | |
| value = sh_cmt_read_cmstr(p); | |
| if (start) | |
| value |= 1 << cfg->timer_bit; | |
| else | |
| value &= ~(1 << cfg->timer_bit); | |
| sh_cmt_write_cmstr(p, value); | |
| raw_spin_unlock_irqrestore(&sh_cmt_lock, flags); | |
| } | |
| static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) | |
| { | |
| int k, ret; | |
| pm_runtime_get_sync(&p->pdev->dev); | |
| dev_pm_syscore_device(&p->pdev->dev, true); | |
| /* enable clock */ | |
| ret = clk_enable(p->clk); | |
| if (ret) { | |
| dev_err(&p->pdev->dev, "cannot enable clock\n"); | |
| goto err0; | |
| } | |
| /* make sure channel is disabled */ | |
| sh_cmt_start_stop_ch(p, 0); | |
| /* configure channel, periodic mode and maximum timeout */ | |
| if (p->width == 16) { | |
| *rate = clk_get_rate(p->clk) / 512; | |
| sh_cmt_write_cmcsr(p, 0x43); | |
| } else { | |
| *rate = clk_get_rate(p->clk) / 8; | |
| sh_cmt_write_cmcsr(p, 0x01a4); | |
| } | |
| sh_cmt_write_cmcor(p, 0xffffffff); | |
| sh_cmt_write_cmcnt(p, 0); | |
| /* | |
| * According to the sh73a0 user's manual, as CMCNT can be operated | |
| * only by the RCLK (Pseudo 32 KHz), there's one restriction on | |
| * modifying CMCNT register; two RCLK cycles are necessary before | |
| * this register is either read or any modification of the value | |
| * it holds is reflected in the LSI's actual operation. | |
| * | |
| * While at it, we're supposed to clear out the CMCNT as of this | |
| * moment, so make sure it's processed properly here. This will | |
| * take RCLKx2 at maximum. | |
| */ | |
| for (k = 0; k < 100; k++) { | |
| if (!sh_cmt_read_cmcnt(p)) | |
| break; | |
| udelay(1); | |
| } | |
| if (sh_cmt_read_cmcnt(p)) { | |
| dev_err(&p->pdev->dev, "cannot clear CMCNT\n"); | |
| ret = -ETIMEDOUT; | |
| goto err1; | |
| } | |
| /* enable channel */ | |
| sh_cmt_start_stop_ch(p, 1); | |
| return 0; | |
| err1: | |
| /* stop clock */ | |
| clk_disable(p->clk); | |
| err0: | |
| return ret; | |
| } | |
| static void sh_cmt_disable(struct sh_cmt_priv *p) | |
| { | |
| /* disable channel */ | |
| sh_cmt_start_stop_ch(p, 0); | |
| /* disable interrupts in CMT block */ | |
| sh_cmt_write_cmcsr(p, 0); | |
| /* stop clock */ | |
| clk_disable(p->clk); | |
| dev_pm_syscore_device(&p->pdev->dev, false); | |
| pm_runtime_put(&p->pdev->dev); | |
| } | |
| /* private flags */ | |
| #define FLAG_CLOCKEVENT (1 << 0) | |
| #define FLAG_CLOCKSOURCE (1 << 1) | |
| #define FLAG_REPROGRAM (1 << 2) | |
| #define FLAG_SKIPEVENT (1 << 3) | |
| #define FLAG_IRQCONTEXT (1 << 4) | |
| static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p, | |
| int absolute) | |
| { | |
| unsigned long new_match; | |
| unsigned long value = p->next_match_value; | |
| unsigned long delay = 0; | |
| unsigned long now = 0; | |
| int has_wrapped; | |
| now = sh_cmt_get_counter(p, &has_wrapped); | |
| p->flags |= FLAG_REPROGRAM; /* force reprogram */ | |
| if (has_wrapped) { | |
| /* we're competing with the interrupt handler. | |
| * -> let the interrupt handler reprogram the timer. | |
| * -> interrupt number two handles the event. | |
| */ | |
| p->flags |= FLAG_SKIPEVENT; | |
| return; | |
| } | |
| if (absolute) | |
| now = 0; | |
| do { | |
| /* reprogram the timer hardware, | |
| * but don't save the new match value yet. | |
| */ | |
| new_match = now + value + delay; | |
| if (new_match > p->max_match_value) | |
| new_match = p->max_match_value; | |
| sh_cmt_write_cmcor(p, new_match); | |
| now = sh_cmt_get_counter(p, &has_wrapped); | |
| if (has_wrapped && (new_match > p->match_value)) { | |
| /* we are changing to a greater match value, | |
| * so this wrap must be caused by the counter | |
| * matching the old value. | |
| * -> first interrupt reprograms the timer. | |
| * -> interrupt number two handles the event. | |
| */ | |
| p->flags |= FLAG_SKIPEVENT; | |
| break; | |
| } | |
| if (has_wrapped) { | |
| /* we are changing to a smaller match value, | |
| * so the wrap must be caused by the counter | |
| * matching the new value. | |
| * -> save programmed match value. | |
| * -> let isr handle the event. | |
| */ | |
| p->match_value = new_match; | |
| break; | |
| } | |
| /* be safe: verify hardware settings */ | |
| if (now < new_match) { | |
| /* timer value is below match value, all good. | |
| * this makes sure we won't miss any match events. | |
| * -> save programmed match value. | |
| * -> let isr handle the event. | |
| */ | |
| p->match_value = new_match; | |
| break; | |
| } | |
| /* the counter has reached a value greater | |
| * than our new match value. and since the | |
| * has_wrapped flag isn't set we must have | |
| * programmed a too close event. | |
| * -> increase delay and retry. | |
| */ | |
| if (delay) | |
| delay <<= 1; | |
| else | |
| delay = 1; | |
| if (!delay) | |
| dev_warn(&p->pdev->dev, "too long delay\n"); | |
| } while (delay); | |
| } | |
| static void __sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta) | |
| { | |
| if (delta > p->max_match_value) | |
| dev_warn(&p->pdev->dev, "delta out of range\n"); | |
| p->next_match_value = delta; | |
| sh_cmt_clock_event_program_verify(p, 0); | |
| } | |
| static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta) | |
| { | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&p->lock, flags); | |
| __sh_cmt_set_next(p, delta); | |
| raw_spin_unlock_irqrestore(&p->lock, flags); | |
| } | |
| static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id) | |
| { | |
| struct sh_cmt_priv *p = dev_id; | |
| /* clear flags */ | |
| sh_cmt_write_cmcsr(p, sh_cmt_read_cmcsr(p) & p->clear_bits); | |
| /* update clock source counter to begin with if enabled | |
| * the wrap flag should be cleared by the timer specific | |
| * isr before we end up here. | |
| */ | |
| if (p->flags & FLAG_CLOCKSOURCE) | |
| p->total_cycles += p->match_value + 1; | |
| if (!(p->flags & FLAG_REPROGRAM)) | |
| p->next_match_value = p->max_match_value; | |
| p->flags |= FLAG_IRQCONTEXT; | |
| if (p->flags & FLAG_CLOCKEVENT) { | |
| if (!(p->flags & FLAG_SKIPEVENT)) { | |
| if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT) { | |
| p->next_match_value = p->max_match_value; | |
| p->flags |= FLAG_REPROGRAM; | |
| } | |
| p->ced.event_handler(&p->ced); | |
| } | |
| } | |
| p->flags &= ~FLAG_SKIPEVENT; | |
| if (p->flags & FLAG_REPROGRAM) { | |
| p->flags &= ~FLAG_REPROGRAM; | |
| sh_cmt_clock_event_program_verify(p, 1); | |
| if (p->flags & FLAG_CLOCKEVENT) | |
| if ((p->ced.mode == CLOCK_EVT_MODE_SHUTDOWN) | |
| || (p->match_value == p->next_match_value)) | |
| p->flags &= ~FLAG_REPROGRAM; | |
| } | |
| p->flags &= ~FLAG_IRQCONTEXT; | |
| return IRQ_HANDLED; | |
| } | |
| static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag) | |
| { | |
| int ret = 0; | |
| unsigned long flags; | |
| raw_spin_lock_irqsave(&p->lock, flags); | |
| if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) | |
| ret = sh_cmt_enable(p, &p->rate); | |
| if (ret) | |
| goto out; | |
| p->flags |= flag; | |
| /* setup timeout if no clockevent */ | |
| if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT))) | |
| __sh_cmt_set_next(p, p->max_match_value); | |
| out: | |
| raw_spin_unlock_irqrestore(&p->lock, flags); | |
| return ret; | |
| } | |
| static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag) | |
| { | |
| unsigned long flags; | |
| unsigned long f; | |
| raw_spin_lock_irqsave(&p->lock, flags); | |
| f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE); | |
| p->flags &= ~flag; | |
| if (f && !(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) | |
| sh_cmt_disable(p); | |
| /* adjust the timeout to maximum if only clocksource left */ | |
| if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE)) | |
| __sh_cmt_set_next(p, p->max_match_value); | |
| raw_spin_unlock_irqrestore(&p->lock, flags); | |
| } | |
| static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs) | |
| { | |
| return container_of(cs, struct sh_cmt_priv, cs); | |
| } | |
| static cycle_t sh_cmt_clocksource_read(struct clocksource *cs) | |
| { | |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); | |
| unsigned long flags, raw; | |
| unsigned long value; | |
| int has_wrapped; | |
| raw_spin_lock_irqsave(&p->lock, flags); | |
| value = p->total_cycles; | |
| raw = sh_cmt_get_counter(p, &has_wrapped); | |
| if (unlikely(has_wrapped)) | |
| raw += p->match_value + 1; | |
| raw_spin_unlock_irqrestore(&p->lock, flags); | |
| return value + raw; | |
| } | |
| static int sh_cmt_clocksource_enable(struct clocksource *cs) | |
| { | |
| int ret; | |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); | |
| WARN_ON(p->cs_enabled); | |
| p->total_cycles = 0; | |
| ret = sh_cmt_start(p, FLAG_CLOCKSOURCE); | |
| if (!ret) { | |
| __clocksource_updatefreq_hz(cs, p->rate); | |
| p->cs_enabled = true; | |
| } | |
| return ret; | |
| } | |
| static void sh_cmt_clocksource_disable(struct clocksource *cs) | |
| { | |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); | |
| WARN_ON(!p->cs_enabled); | |
| sh_cmt_stop(p, FLAG_CLOCKSOURCE); | |
| p->cs_enabled = false; | |
| } | |
| static void sh_cmt_clocksource_suspend(struct clocksource *cs) | |
| { | |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); | |
| sh_cmt_stop(p, FLAG_CLOCKSOURCE); | |
| pm_genpd_syscore_poweroff(&p->pdev->dev); | |
| } | |
| static void sh_cmt_clocksource_resume(struct clocksource *cs) | |
| { | |
| struct sh_cmt_priv *p = cs_to_sh_cmt(cs); | |
| pm_genpd_syscore_poweron(&p->pdev->dev); | |
| sh_cmt_start(p, FLAG_CLOCKSOURCE); | |
| } | |
| static int sh_cmt_register_clocksource(struct sh_cmt_priv *p, | |
| char *name, unsigned long rating) | |
| { | |
| struct clocksource *cs = &p->cs; | |
| cs->name = name; | |
| cs->rating = rating; | |
| cs->read = sh_cmt_clocksource_read; | |
| cs->enable = sh_cmt_clocksource_enable; | |
| cs->disable = sh_cmt_clocksource_disable; | |
| cs->suspend = sh_cmt_clocksource_suspend; | |
| cs->resume = sh_cmt_clocksource_resume; | |
| cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8); | |
| cs->flags = CLOCK_SOURCE_IS_CONTINUOUS; | |
| dev_info(&p->pdev->dev, "used as clock source\n"); | |
| /* Register with dummy 1 Hz value, gets updated in ->enable() */ | |
| clocksource_register_hz(cs, 1); | |
| return 0; | |
| } | |
| static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced) | |
| { | |
| return container_of(ced, struct sh_cmt_priv, ced); | |
| } | |
| static void sh_cmt_clock_event_start(struct sh_cmt_priv *p, int periodic) | |
| { | |
| struct clock_event_device *ced = &p->ced; | |
| sh_cmt_start(p, FLAG_CLOCKEVENT); | |
| /* TODO: calculate good shift from rate and counter bit width */ | |
| ced->shift = 32; | |
| ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift); | |
| ced->max_delta_ns = clockevent_delta2ns(p->max_match_value, ced); | |
| ced->min_delta_ns = clockevent_delta2ns(0x1f, ced); | |
| if (periodic) | |
| sh_cmt_set_next(p, ((p->rate + HZ/2) / HZ) - 1); | |
| else | |
| sh_cmt_set_next(p, p->max_match_value); | |
| } | |
| static void sh_cmt_clock_event_mode(enum clock_event_mode mode, | |
| struct clock_event_device *ced) | |
| { | |
| struct sh_cmt_priv *p = ced_to_sh_cmt(ced); | |
| /* deal with old setting first */ | |
| switch (ced->mode) { | |
| case CLOCK_EVT_MODE_PERIODIC: | |
| case CLOCK_EVT_MODE_ONESHOT: | |
| sh_cmt_stop(p, FLAG_CLOCKEVENT); | |
| break; | |
| default: | |
| break; | |
| } | |
| switch (mode) { | |
| case CLOCK_EVT_MODE_PERIODIC: | |
| dev_info(&p->pdev->dev, "used for periodic clock events\n"); | |
| sh_cmt_clock_event_start(p, 1); | |
| break; | |
| case CLOCK_EVT_MODE_ONESHOT: | |
| dev_info(&p->pdev->dev, "used for oneshot clock events\n"); | |
| sh_cmt_clock_event_start(p, 0); | |
| break; | |
| case CLOCK_EVT_MODE_SHUTDOWN: | |
| case CLOCK_EVT_MODE_UNUSED: | |
| sh_cmt_stop(p, FLAG_CLOCKEVENT); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static int sh_cmt_clock_event_next(unsigned long delta, | |
| struct clock_event_device *ced) | |
| { | |
| struct sh_cmt_priv *p = ced_to_sh_cmt(ced); | |
| BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT); | |
| if (likely(p->flags & FLAG_IRQCONTEXT)) | |
| p->next_match_value = delta - 1; | |
| else | |
| sh_cmt_set_next(p, delta - 1); | |
| return 0; | |
| } | |
| static void sh_cmt_clock_event_suspend(struct clock_event_device *ced) | |
| { | |
| pm_genpd_syscore_poweroff(&ced_to_sh_cmt(ced)->pdev->dev); | |
| } | |
| static void sh_cmt_clock_event_resume(struct clock_event_device *ced) | |
| { | |
| pm_genpd_syscore_poweron(&ced_to_sh_cmt(ced)->pdev->dev); | |
| } | |
| static void sh_cmt_register_clockevent(struct sh_cmt_priv *p, | |
| char *name, unsigned long rating) | |
| { | |
| struct clock_event_device *ced = &p->ced; | |
| memset(ced, 0, sizeof(*ced)); | |
| ced->name = name; | |
| ced->features = CLOCK_EVT_FEAT_PERIODIC; | |
| ced->features |= CLOCK_EVT_FEAT_ONESHOT; | |
| ced->rating = rating; | |
| ced->cpumask = cpumask_of(0); | |
| ced->set_next_event = sh_cmt_clock_event_next; | |
| ced->set_mode = sh_cmt_clock_event_mode; | |
| ced->suspend = sh_cmt_clock_event_suspend; | |
| ced->resume = sh_cmt_clock_event_resume; | |
| dev_info(&p->pdev->dev, "used for clock events\n"); | |
| clockevents_register_device(ced); | |
| } | |
| static int sh_cmt_register(struct sh_cmt_priv *p, char *name, | |
| unsigned long clockevent_rating, | |
| unsigned long clocksource_rating) | |
| { | |
| if (clockevent_rating) | |
| sh_cmt_register_clockevent(p, name, clockevent_rating); | |
| if (clocksource_rating) | |
| sh_cmt_register_clocksource(p, name, clocksource_rating); | |
| return 0; | |
| } | |
| static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev) | |
| { | |
| struct sh_timer_config *cfg = pdev->dev.platform_data; | |
| struct resource *res, *res2; | |
| int irq, ret; | |
| ret = -ENXIO; | |
| memset(p, 0, sizeof(*p)); | |
| p->pdev = pdev; | |
| if (!cfg) { | |
| dev_err(&p->pdev->dev, "missing platform data\n"); | |
| goto err0; | |
| } | |
| res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0); | |
| if (!res) { | |
| dev_err(&p->pdev->dev, "failed to get I/O memory\n"); | |
| goto err0; | |
| } | |
| /* optional resource for the shared timer start/stop register */ | |
| res2 = platform_get_resource(p->pdev, IORESOURCE_MEM, 1); | |
| irq = platform_get_irq(p->pdev, 0); | |
| if (irq < 0) { | |
| dev_err(&p->pdev->dev, "failed to get irq\n"); | |
| goto err0; | |
| } | |
| /* map memory, let mapbase point to our channel */ | |
| p->mapbase = ioremap_nocache(res->start, resource_size(res)); | |
| if (p->mapbase == NULL) { | |
| dev_err(&p->pdev->dev, "failed to remap I/O memory\n"); | |
| goto err0; | |
| } | |
| /* map second resource for CMSTR */ | |
| p->mapbase_str = ioremap_nocache(res2 ? res2->start : | |
| res->start - cfg->channel_offset, | |
| res2 ? resource_size(res2) : 2); | |
| if (p->mapbase_str == NULL) { | |
| dev_err(&p->pdev->dev, "failed to remap I/O second memory\n"); | |
| goto err1; | |
| } | |
| /* request irq using setup_irq() (too early for request_irq()) */ | |
| p->irqaction.name = dev_name(&p->pdev->dev); | |
| p->irqaction.handler = sh_cmt_interrupt; | |
| p->irqaction.dev_id = p; | |
| p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | \ | |
| IRQF_IRQPOLL | IRQF_NOBALANCING; | |
| /* get hold of clock */ | |
| p->clk = clk_get(&p->pdev->dev, "cmt_fck"); | |
| if (IS_ERR(p->clk)) { | |
| dev_err(&p->pdev->dev, "cannot get clock\n"); | |
| ret = PTR_ERR(p->clk); | |
| goto err2; | |
| } | |
| if (res2 && (resource_size(res2) == 4)) { | |
| /* assume both CMSTR and CMCSR to be 32-bit */ | |
| p->read_control = sh_cmt_read32; | |
| p->write_control = sh_cmt_write32; | |
| } else { | |
| p->read_control = sh_cmt_read16; | |
| p->write_control = sh_cmt_write16; | |
| } | |
| if (resource_size(res) == 6) { | |
| p->width = 16; | |
| p->read_count = sh_cmt_read16; | |
| p->write_count = sh_cmt_write16; | |
| p->overflow_bit = 0x80; | |
| p->clear_bits = ~0x80; | |
| } else { | |
| p->width = 32; | |
| p->read_count = sh_cmt_read32; | |
| p->write_count = sh_cmt_write32; | |
| p->overflow_bit = 0x8000; | |
| p->clear_bits = ~0xc000; | |
| } | |
| if (p->width == (sizeof(p->max_match_value) * 8)) | |
| p->max_match_value = ~0; | |
| else | |
| p->max_match_value = (1 << p->width) - 1; | |
| p->match_value = p->max_match_value; | |
| raw_spin_lock_init(&p->lock); | |
| ret = sh_cmt_register(p, (char *)dev_name(&p->pdev->dev), | |
| cfg->clockevent_rating, | |
| cfg->clocksource_rating); | |
| if (ret) { | |
| dev_err(&p->pdev->dev, "registration failed\n"); | |
| goto err3; | |
| } | |
| p->cs_enabled = false; | |
| ret = setup_irq(irq, &p->irqaction); | |
| if (ret) { | |
| dev_err(&p->pdev->dev, "failed to request irq %d\n", irq); | |
| goto err3; | |
| } | |
| platform_set_drvdata(pdev, p); | |
| return 0; | |
| err3: | |
| clk_put(p->clk); | |
| err2: | |
| iounmap(p->mapbase_str); | |
| err1: | |
| iounmap(p->mapbase); | |
| err0: | |
| return ret; | |
| } | |
| static int sh_cmt_probe(struct platform_device *pdev) | |
| { | |
| struct sh_cmt_priv *p = platform_get_drvdata(pdev); | |
| struct sh_timer_config *cfg = pdev->dev.platform_data; | |
| int ret; | |
| if (!is_early_platform_device(pdev)) { | |
| pm_runtime_set_active(&pdev->dev); | |
| pm_runtime_enable(&pdev->dev); | |
| } | |
| if (p) { | |
| dev_info(&pdev->dev, "kept as earlytimer\n"); | |
| goto out; | |
| } | |
| p = kmalloc(sizeof(*p), GFP_KERNEL); | |
| if (p == NULL) { | |
| dev_err(&pdev->dev, "failed to allocate driver data\n"); | |
| return -ENOMEM; | |
| } | |
| ret = sh_cmt_setup(p, pdev); | |
| if (ret) { | |
| kfree(p); | |
| pm_runtime_idle(&pdev->dev); | |
| return ret; | |
| } | |
| if (is_early_platform_device(pdev)) | |
| return 0; | |
| out: | |
| if (cfg->clockevent_rating || cfg->clocksource_rating) | |
| pm_runtime_irq_safe(&pdev->dev); | |
| else | |
| pm_runtime_idle(&pdev->dev); | |
| return 0; | |
| } | |
| static int sh_cmt_remove(struct platform_device *pdev) | |
| { | |
| return -EBUSY; /* cannot unregister clockevent and clocksource */ | |
| } | |
| static struct platform_driver sh_cmt_device_driver = { | |
| .probe = sh_cmt_probe, | |
| .remove = sh_cmt_remove, | |
| .driver = { | |
| .name = "sh_cmt", | |
| } | |
| }; | |
| static int __init sh_cmt_init(void) | |
| { | |
| return platform_driver_register(&sh_cmt_device_driver); | |
| } | |
| static void __exit sh_cmt_exit(void) | |
| { | |
| platform_driver_unregister(&sh_cmt_device_driver); | |
| } | |
| early_platform_init("earlytimer", &sh_cmt_device_driver); | |
| subsys_initcall(sh_cmt_init); | |
| module_exit(sh_cmt_exit); | |
| MODULE_AUTHOR("Magnus Damm"); | |
| MODULE_DESCRIPTION("SuperH CMT Timer Driver"); | |
| MODULE_LICENSE("GPL v2"); |