| /* | |
| * lpc_sch.c - LPC interface for Intel Poulsbo SCH | |
| * | |
| * LPC bridge function of the Intel SCH contains many other | |
| * functional units, such as Interrupt controllers, Timers, | |
| * Power Management, System Management, GPIO, RTC, and LPC | |
| * Configuration Registers. | |
| * | |
| * Copyright (c) 2010 CompuLab Ltd | |
| * Author: Denis Turischev <denis@compulab.co.il> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License 2 as published | |
| * by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; see the file COPYING. If not, write to | |
| * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/errno.h> | |
| #include <linux/acpi.h> | |
| #include <linux/pci.h> | |
| #include <linux/mfd/core.h> | |
| #define SMBASE 0x40 | |
| #define SMBUS_IO_SIZE 64 | |
| #define GPIOBASE 0x44 | |
| #define GPIO_IO_SIZE 64 | |
| #define GPIO_IO_SIZE_CENTERTON 128 | |
| #define WDTBASE 0x84 | |
| #define WDT_IO_SIZE 64 | |
| static struct resource smbus_sch_resource = { | |
| .flags = IORESOURCE_IO, | |
| }; | |
| static struct resource gpio_sch_resource = { | |
| .flags = IORESOURCE_IO, | |
| }; | |
| static struct resource wdt_sch_resource = { | |
| .flags = IORESOURCE_IO, | |
| }; | |
| static struct mfd_cell lpc_sch_cells[3]; | |
| static struct mfd_cell isch_smbus_cell = { | |
| .name = "isch_smbus", | |
| .num_resources = 1, | |
| .resources = &smbus_sch_resource, | |
| }; | |
| static struct mfd_cell sch_gpio_cell = { | |
| .name = "sch_gpio", | |
| .num_resources = 1, | |
| .resources = &gpio_sch_resource, | |
| }; | |
| static struct mfd_cell wdt_sch_cell = { | |
| .name = "ie6xx_wdt", | |
| .num_resources = 1, | |
| .resources = &wdt_sch_resource, | |
| }; | |
| static DEFINE_PCI_DEVICE_TABLE(lpc_sch_ids) = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ITC_LPC) }, | |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CENTERTON_ILB) }, | |
| { 0, } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, lpc_sch_ids); | |
| static int lpc_sch_probe(struct pci_dev *dev, | |
| const struct pci_device_id *id) | |
| { | |
| unsigned int base_addr_cfg; | |
| unsigned short base_addr; | |
| int i, cells = 0; | |
| int ret; | |
| pci_read_config_dword(dev, SMBASE, &base_addr_cfg); | |
| base_addr = 0; | |
| if (!(base_addr_cfg & (1 << 31))) | |
| dev_warn(&dev->dev, "Decode of the SMBus I/O range disabled\n"); | |
| else | |
| base_addr = (unsigned short)base_addr_cfg; | |
| if (base_addr == 0) { | |
| dev_warn(&dev->dev, "I/O space for SMBus uninitialized\n"); | |
| } else { | |
| lpc_sch_cells[cells++] = isch_smbus_cell; | |
| smbus_sch_resource.start = base_addr; | |
| smbus_sch_resource.end = base_addr + SMBUS_IO_SIZE - 1; | |
| } | |
| pci_read_config_dword(dev, GPIOBASE, &base_addr_cfg); | |
| base_addr = 0; | |
| if (!(base_addr_cfg & (1 << 31))) | |
| dev_warn(&dev->dev, "Decode of the GPIO I/O range disabled\n"); | |
| else | |
| base_addr = (unsigned short)base_addr_cfg; | |
| if (base_addr == 0) { | |
| dev_warn(&dev->dev, "I/O space for GPIO uninitialized\n"); | |
| } else { | |
| lpc_sch_cells[cells++] = sch_gpio_cell; | |
| gpio_sch_resource.start = base_addr; | |
| if (id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) | |
| gpio_sch_resource.end = base_addr + GPIO_IO_SIZE_CENTERTON - 1; | |
| else | |
| gpio_sch_resource.end = base_addr + GPIO_IO_SIZE - 1; | |
| } | |
| if (id->device == PCI_DEVICE_ID_INTEL_ITC_LPC | |
| || id->device == PCI_DEVICE_ID_INTEL_CENTERTON_ILB) { | |
| pci_read_config_dword(dev, WDTBASE, &base_addr_cfg); | |
| base_addr = 0; | |
| if (!(base_addr_cfg & (1 << 31))) | |
| dev_warn(&dev->dev, "Decode of the WDT I/O range disabled\n"); | |
| else | |
| base_addr = (unsigned short)base_addr_cfg; | |
| if (base_addr == 0) | |
| dev_warn(&dev->dev, "I/O space for WDT uninitialized\n"); | |
| else { | |
| lpc_sch_cells[cells++] = wdt_sch_cell; | |
| wdt_sch_resource.start = base_addr; | |
| wdt_sch_resource.end = base_addr + WDT_IO_SIZE - 1; | |
| } | |
| } | |
| if (WARN_ON(cells > ARRAY_SIZE(lpc_sch_cells))) { | |
| dev_err(&dev->dev, "Cell count exceeds array size"); | |
| return -ENODEV; | |
| } | |
| if (cells == 0) { | |
| dev_err(&dev->dev, "All decode registers disabled.\n"); | |
| return -ENODEV; | |
| } | |
| for (i = 0; i < cells; i++) | |
| lpc_sch_cells[i].id = id->device; | |
| ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL); | |
| if (ret) | |
| mfd_remove_devices(&dev->dev); | |
| return ret; | |
| } | |
| static void lpc_sch_remove(struct pci_dev *dev) | |
| { | |
| mfd_remove_devices(&dev->dev); | |
| } | |
| static struct pci_driver lpc_sch_driver = { | |
| .name = "lpc_sch", | |
| .id_table = lpc_sch_ids, | |
| .probe = lpc_sch_probe, | |
| .remove = lpc_sch_remove, | |
| }; | |
| module_pci_driver(lpc_sch_driver); | |
| MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>"); | |
| MODULE_DESCRIPTION("LPC interface for Intel Poulsbo SCH"); | |
| MODULE_LICENSE("GPL"); |