| /* |
| * Copyright (C) 2008 Maarten Maathuis. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining |
| * a copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sublicense, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial |
| * portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE |
| * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
| * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include <acpi/button.h> |
| |
| #include <linux/pm_runtime.h> |
| #include <linux/vga_switcheroo.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_atomic.h> |
| |
| #include "nouveau_reg.h" |
| #include "nouveau_drv.h" |
| #include "dispnv04/hw.h" |
| #include "nouveau_acpi.h" |
| |
| #include "nouveau_display.h" |
| #include "nouveau_connector.h" |
| #include "nouveau_encoder.h" |
| #include "nouveau_crtc.h" |
| |
| #include <nvif/class.h> |
| #include <nvif/cl0046.h> |
| #include <nvif/event.h> |
| |
| struct drm_display_mode * |
| nouveau_conn_native_mode(struct drm_connector *connector) |
| { |
| const struct drm_connector_helper_funcs *helper = connector->helper_private; |
| struct nouveau_drm *drm = nouveau_drm(connector->dev); |
| struct drm_device *dev = connector->dev; |
| struct drm_display_mode *mode, *largest = NULL; |
| int high_w = 0, high_h = 0, high_v = 0; |
| |
| list_for_each_entry(mode, &connector->probed_modes, head) { |
| mode->vrefresh = drm_mode_vrefresh(mode); |
| if (helper->mode_valid(connector, mode) != MODE_OK || |
| (mode->flags & DRM_MODE_FLAG_INTERLACE)) |
| continue; |
| |
| /* Use preferred mode if there is one.. */ |
| if (mode->type & DRM_MODE_TYPE_PREFERRED) { |
| NV_DEBUG(drm, "native mode from preferred\n"); |
| return drm_mode_duplicate(dev, mode); |
| } |
| |
| /* Otherwise, take the resolution with the largest width, then |
| * height, then vertical refresh |
| */ |
| if (mode->hdisplay < high_w) |
| continue; |
| |
| if (mode->hdisplay == high_w && mode->vdisplay < high_h) |
| continue; |
| |
| if (mode->hdisplay == high_w && mode->vdisplay == high_h && |
| mode->vrefresh < high_v) |
| continue; |
| |
| high_w = mode->hdisplay; |
| high_h = mode->vdisplay; |
| high_v = mode->vrefresh; |
| largest = mode; |
| } |
| |
| NV_DEBUG(drm, "native mode from largest: %dx%d@%d\n", |
| high_w, high_h, high_v); |
| return largest ? drm_mode_duplicate(dev, largest) : NULL; |
| } |
| |
| int |
| nouveau_conn_atomic_get_property(struct drm_connector *connector, |
| const struct drm_connector_state *state, |
| struct drm_property *property, u64 *val) |
| { |
| struct nouveau_conn_atom *asyc = nouveau_conn_atom(state); |
| struct nouveau_display *disp = nouveau_display(connector->dev); |
| struct drm_device *dev = connector->dev; |
| |
| if (property == dev->mode_config.scaling_mode_property) |
| *val = asyc->scaler.mode; |
| else if (property == disp->underscan_property) |
| *val = asyc->scaler.underscan.mode; |
| else if (property == disp->underscan_hborder_property) |
| *val = asyc->scaler.underscan.hborder; |
| else if (property == disp->underscan_vborder_property) |
| *val = asyc->scaler.underscan.vborder; |
| else if (property == disp->dithering_mode) |
| *val = asyc->dither.mode; |
| else if (property == disp->dithering_depth) |
| *val = asyc->dither.depth; |
| else if (property == disp->vibrant_hue_property) |
| *val = asyc->procamp.vibrant_hue; |
| else if (property == disp->color_vibrance_property) |
| *val = asyc->procamp.color_vibrance; |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| int |
| nouveau_conn_atomic_set_property(struct drm_connector *connector, |
| struct drm_connector_state *state, |
| struct drm_property *property, u64 val) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_conn_atom *asyc = nouveau_conn_atom(state); |
| struct nouveau_display *disp = nouveau_display(dev); |
| |
| if (property == dev->mode_config.scaling_mode_property) { |
| switch (val) { |
| case DRM_MODE_SCALE_NONE: |
| /* We allow 'None' for EDID modes, even on a fixed |
| * panel (some exist with support for lower refresh |
| * rates, which people might want to use for power- |
| * saving purposes). |
| * |
| * Non-EDID modes will force the use of GPU scaling |
| * to the native mode regardless of this setting. |
| */ |
| switch (connector->connector_type) { |
| case DRM_MODE_CONNECTOR_LVDS: |
| case DRM_MODE_CONNECTOR_eDP: |
| /* ... except prior to G80, where the code |
| * doesn't support such things. |
| */ |
| if (disp->disp.oclass < NV50_DISP) |
| return -EINVAL; |
| break; |
| default: |
| break; |
| } |
| case DRM_MODE_SCALE_FULLSCREEN: |
| case DRM_MODE_SCALE_CENTER: |
| case DRM_MODE_SCALE_ASPECT: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (asyc->scaler.mode != val) { |
| asyc->scaler.mode = val; |
| asyc->set.scaler = true; |
| } |
| } else |
| if (property == disp->underscan_property) { |
| if (asyc->scaler.underscan.mode != val) { |
| asyc->scaler.underscan.mode = val; |
| asyc->set.scaler = true; |
| } |
| } else |
| if (property == disp->underscan_hborder_property) { |
| if (asyc->scaler.underscan.hborder != val) { |
| asyc->scaler.underscan.hborder = val; |
| asyc->set.scaler = true; |
| } |
| } else |
| if (property == disp->underscan_vborder_property) { |
| if (asyc->scaler.underscan.vborder != val) { |
| asyc->scaler.underscan.vborder = val; |
| asyc->set.scaler = true; |
| } |
| } else |
| if (property == disp->dithering_mode) { |
| if (asyc->dither.mode != val) { |
| asyc->dither.mode = val; |
| asyc->set.dither = true; |
| } |
| } else |
| if (property == disp->dithering_depth) { |
| if (asyc->dither.mode != val) { |
| asyc->dither.depth = val; |
| asyc->set.dither = true; |
| } |
| } else |
| if (property == disp->vibrant_hue_property) { |
| if (asyc->procamp.vibrant_hue != val) { |
| asyc->procamp.vibrant_hue = val; |
| asyc->set.procamp = true; |
| } |
| } else |
| if (property == disp->color_vibrance_property) { |
| if (asyc->procamp.color_vibrance != val) { |
| asyc->procamp.color_vibrance = val; |
| asyc->set.procamp = true; |
| } |
| } else { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| void |
| nouveau_conn_atomic_destroy_state(struct drm_connector *connector, |
| struct drm_connector_state *state) |
| { |
| struct nouveau_conn_atom *asyc = nouveau_conn_atom(state); |
| __drm_atomic_helper_connector_destroy_state(&asyc->state); |
| kfree(asyc); |
| } |
| |
| struct drm_connector_state * |
| nouveau_conn_atomic_duplicate_state(struct drm_connector *connector) |
| { |
| struct nouveau_conn_atom *armc = nouveau_conn_atom(connector->state); |
| struct nouveau_conn_atom *asyc; |
| if (!(asyc = kmalloc(sizeof(*asyc), GFP_KERNEL))) |
| return NULL; |
| __drm_atomic_helper_connector_duplicate_state(connector, &asyc->state); |
| asyc->dither = armc->dither; |
| asyc->scaler = armc->scaler; |
| asyc->procamp = armc->procamp; |
| asyc->set.mask = 0; |
| return &asyc->state; |
| } |
| |
| void |
| nouveau_conn_reset(struct drm_connector *connector) |
| { |
| struct nouveau_conn_atom *asyc; |
| |
| if (WARN_ON(!(asyc = kzalloc(sizeof(*asyc), GFP_KERNEL)))) |
| return; |
| |
| if (connector->state) |
| __drm_atomic_helper_connector_destroy_state(connector->state); |
| __drm_atomic_helper_connector_reset(connector, &asyc->state); |
| asyc->dither.mode = DITHERING_MODE_AUTO; |
| asyc->dither.depth = DITHERING_DEPTH_AUTO; |
| asyc->scaler.mode = DRM_MODE_SCALE_NONE; |
| asyc->scaler.underscan.mode = UNDERSCAN_OFF; |
| asyc->procamp.color_vibrance = 150; |
| asyc->procamp.vibrant_hue = 90; |
| |
| if (nouveau_display(connector->dev)->disp.oclass < NV50_DISP) { |
| switch (connector->connector_type) { |
| case DRM_MODE_CONNECTOR_LVDS: |
| /* See note in nouveau_conn_atomic_set_property(). */ |
| asyc->scaler.mode = DRM_MODE_SCALE_FULLSCREEN; |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| void |
| nouveau_conn_attach_properties(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_conn_atom *armc = nouveau_conn_atom(connector->state); |
| struct nouveau_display *disp = nouveau_display(dev); |
| |
| /* Init DVI-I specific properties. */ |
| if (connector->connector_type == DRM_MODE_CONNECTOR_DVII) |
| drm_object_attach_property(&connector->base, dev->mode_config. |
| dvi_i_subconnector_property, 0); |
| |
| /* Add overscan compensation options to digital outputs. */ |
| if (disp->underscan_property && |
| (connector->connector_type == DRM_MODE_CONNECTOR_DVID || |
| connector->connector_type == DRM_MODE_CONNECTOR_DVII || |
| connector->connector_type == DRM_MODE_CONNECTOR_HDMIA || |
| connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)) { |
| drm_object_attach_property(&connector->base, |
| disp->underscan_property, |
| UNDERSCAN_OFF); |
| drm_object_attach_property(&connector->base, |
| disp->underscan_hborder_property, 0); |
| drm_object_attach_property(&connector->base, |
| disp->underscan_vborder_property, 0); |
| } |
| |
| /* Add hue and saturation options. */ |
| if (disp->vibrant_hue_property) |
| drm_object_attach_property(&connector->base, |
| disp->vibrant_hue_property, |
| armc->procamp.vibrant_hue); |
| if (disp->color_vibrance_property) |
| drm_object_attach_property(&connector->base, |
| disp->color_vibrance_property, |
| armc->procamp.color_vibrance); |
| |
| /* Scaling mode property. */ |
| switch (connector->connector_type) { |
| case DRM_MODE_CONNECTOR_TV: |
| break; |
| case DRM_MODE_CONNECTOR_VGA: |
| if (disp->disp.oclass < NV50_DISP) |
| break; /* Can only scale on DFPs. */ |
| /* Fall-through. */ |
| default: |
| drm_object_attach_property(&connector->base, dev->mode_config. |
| scaling_mode_property, |
| armc->scaler.mode); |
| break; |
| } |
| |
| /* Dithering properties. */ |
| switch (connector->connector_type) { |
| case DRM_MODE_CONNECTOR_TV: |
| case DRM_MODE_CONNECTOR_VGA: |
| break; |
| default: |
| if (disp->dithering_mode) { |
| drm_object_attach_property(&connector->base, |
| disp->dithering_mode, |
| armc->dither.mode); |
| } |
| if (disp->dithering_depth) { |
| drm_object_attach_property(&connector->base, |
| disp->dithering_depth, |
| armc->dither.depth); |
| } |
| break; |
| } |
| } |
| |
| MODULE_PARM_DESC(tv_disable, "Disable TV-out detection"); |
| int nouveau_tv_disable = 0; |
| module_param_named(tv_disable, nouveau_tv_disable, int, 0400); |
| |
| MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status"); |
| int nouveau_ignorelid = 0; |
| module_param_named(ignorelid, nouveau_ignorelid, int, 0400); |
| |
| MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (default: enabled)"); |
| int nouveau_duallink = 1; |
| module_param_named(duallink, nouveau_duallink, int, 0400); |
| |
| MODULE_PARM_DESC(hdmimhz, "Force a maximum HDMI pixel clock (in MHz)"); |
| int nouveau_hdmimhz = 0; |
| module_param_named(hdmimhz, nouveau_hdmimhz, int, 0400); |
| |
| struct nouveau_encoder * |
| find_encoder(struct drm_connector *connector, int type) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_encoder *nv_encoder; |
| struct drm_encoder *enc; |
| int i, id; |
| |
| for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { |
| id = connector->encoder_ids[i]; |
| if (!id) |
| break; |
| |
| enc = drm_encoder_find(dev, id); |
| if (!enc) |
| continue; |
| nv_encoder = nouveau_encoder(enc); |
| |
| if (type == DCB_OUTPUT_ANY || |
| (nv_encoder->dcb && nv_encoder->dcb->type == type)) |
| return nv_encoder; |
| } |
| |
| return NULL; |
| } |
| |
| struct nouveau_connector * |
| nouveau_encoder_connector_get(struct nouveau_encoder *encoder) |
| { |
| struct drm_device *dev = to_drm_encoder(encoder)->dev; |
| struct drm_connector *drm_connector; |
| |
| list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head) { |
| if (drm_connector->encoder == to_drm_encoder(encoder)) |
| return nouveau_connector(drm_connector); |
| } |
| |
| return NULL; |
| } |
| |
| static void |
| nouveau_connector_destroy(struct drm_connector *connector) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| nvif_notify_fini(&nv_connector->hpd); |
| kfree(nv_connector->edid); |
| drm_connector_unregister(connector); |
| drm_connector_cleanup(connector); |
| if (nv_connector->aux.transfer) |
| drm_dp_aux_unregister(&nv_connector->aux); |
| kfree(connector); |
| } |
| |
| static struct nouveau_encoder * |
| nouveau_connector_ddc_detect(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nvkm_gpio *gpio = nvxx_gpio(&drm->client.device); |
| struct nouveau_encoder *nv_encoder; |
| struct drm_encoder *encoder; |
| int i, panel = -ENODEV; |
| |
| /* eDP panels need powering on by us (if the VBIOS doesn't default it |
| * to on) before doing any AUX channel transactions. LVDS panel power |
| * is handled by the SOR itself, and not required for LVDS DDC. |
| */ |
| if (nv_connector->type == DCB_CONNECTOR_eDP) { |
| panel = nvkm_gpio_get(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff); |
| if (panel == 0) { |
| nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, 1); |
| msleep(300); |
| } |
| } |
| |
| for (i = 0; nv_encoder = NULL, i < DRM_CONNECTOR_MAX_ENCODER; i++) { |
| int id = connector->encoder_ids[i]; |
| if (id == 0) |
| break; |
| |
| encoder = drm_encoder_find(dev, id); |
| if (!encoder) |
| continue; |
| nv_encoder = nouveau_encoder(encoder); |
| |
| if (nv_encoder->dcb->type == DCB_OUTPUT_DP) { |
| int ret = nouveau_dp_detect(nv_encoder); |
| if (ret == NOUVEAU_DP_MST) |
| return NULL; |
| if (ret == NOUVEAU_DP_SST) |
| break; |
| } else |
| if ((vga_switcheroo_handler_flags() & |
| VGA_SWITCHEROO_CAN_SWITCH_DDC) && |
| nv_encoder->dcb->type == DCB_OUTPUT_LVDS && |
| nv_encoder->i2c) { |
| int ret; |
| vga_switcheroo_lock_ddc(dev->pdev); |
| ret = nvkm_probe_i2c(nv_encoder->i2c, 0x50); |
| vga_switcheroo_unlock_ddc(dev->pdev); |
| if (ret) |
| break; |
| } else |
| if (nv_encoder->i2c) { |
| if (nvkm_probe_i2c(nv_encoder->i2c, 0x50)) |
| break; |
| } |
| } |
| |
| /* eDP panel not detected, restore panel power GPIO to previous |
| * state to avoid confusing the SOR for other output types. |
| */ |
| if (!nv_encoder && panel == 0) |
| nvkm_gpio_set(gpio, 0, DCB_GPIO_PANEL_POWER, 0xff, panel); |
| |
| return nv_encoder; |
| } |
| |
| static struct nouveau_encoder * |
| nouveau_connector_of_detect(struct drm_connector *connector) |
| { |
| #ifdef __powerpc__ |
| struct drm_device *dev = connector->dev; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder; |
| struct device_node *cn, *dn = pci_device_to_OF_node(dev->pdev); |
| |
| if (!dn || |
| !((nv_encoder = find_encoder(connector, DCB_OUTPUT_TMDS)) || |
| (nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG)))) |
| return NULL; |
| |
| for_each_child_of_node(dn, cn) { |
| const char *name = of_get_property(cn, "name", NULL); |
| const void *edid = of_get_property(cn, "EDID", NULL); |
| int idx = name ? name[strlen(name) - 1] - 'A' : 0; |
| |
| if (nv_encoder->dcb->i2c_index == idx && edid) { |
| nv_connector->edid = |
| kmemdup(edid, EDID_LENGTH, GFP_KERNEL); |
| of_node_put(cn); |
| return nv_encoder; |
| } |
| } |
| #endif |
| return NULL; |
| } |
| |
| static void |
| nouveau_connector_set_encoder(struct drm_connector *connector, |
| struct nouveau_encoder *nv_encoder) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_drm *drm = nouveau_drm(connector->dev); |
| struct drm_device *dev = connector->dev; |
| |
| if (nv_connector->detected_encoder == nv_encoder) |
| return; |
| nv_connector->detected_encoder = nv_encoder; |
| |
| if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_TESLA) { |
| connector->interlace_allowed = true; |
| connector->doublescan_allowed = true; |
| } else |
| if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS || |
| nv_encoder->dcb->type == DCB_OUTPUT_TMDS) { |
| connector->doublescan_allowed = false; |
| connector->interlace_allowed = false; |
| } else { |
| connector->doublescan_allowed = true; |
| if (drm->client.device.info.family == NV_DEVICE_INFO_V0_KELVIN || |
| (drm->client.device.info.family == NV_DEVICE_INFO_V0_CELSIUS && |
| (dev->pdev->device & 0x0ff0) != 0x0100 && |
| (dev->pdev->device & 0x0ff0) != 0x0150)) |
| /* HW is broken */ |
| connector->interlace_allowed = false; |
| else |
| connector->interlace_allowed = true; |
| } |
| |
| if (nv_connector->type == DCB_CONNECTOR_DVI_I) { |
| drm_object_property_set_value(&connector->base, |
| dev->mode_config.dvi_i_subconnector_property, |
| nv_encoder->dcb->type == DCB_OUTPUT_TMDS ? |
| DRM_MODE_SUBCONNECTOR_DVID : |
| DRM_MODE_SUBCONNECTOR_DVIA); |
| } |
| } |
| |
| static enum drm_connector_status |
| nouveau_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = NULL; |
| struct nouveau_encoder *nv_partner; |
| struct i2c_adapter *i2c; |
| int type; |
| int ret; |
| enum drm_connector_status conn_status = connector_status_disconnected; |
| |
| /* Cleanup the previous EDID block. */ |
| if (nv_connector->edid) { |
| drm_mode_connector_update_edid_property(connector, NULL); |
| kfree(nv_connector->edid); |
| nv_connector->edid = NULL; |
| } |
| |
| ret = pm_runtime_get_sync(connector->dev->dev); |
| if (ret < 0 && ret != -EACCES) |
| return conn_status; |
| |
| nv_encoder = nouveau_connector_ddc_detect(connector); |
| if (nv_encoder && (i2c = nv_encoder->i2c) != NULL) { |
| if ((vga_switcheroo_handler_flags() & |
| VGA_SWITCHEROO_CAN_SWITCH_DDC) && |
| nv_connector->type == DCB_CONNECTOR_LVDS) |
| nv_connector->edid = drm_get_edid_switcheroo(connector, |
| i2c); |
| else |
| nv_connector->edid = drm_get_edid(connector, i2c); |
| |
| drm_mode_connector_update_edid_property(connector, |
| nv_connector->edid); |
| if (!nv_connector->edid) { |
| NV_ERROR(drm, "DDC responded, but no EDID for %s\n", |
| connector->name); |
| goto detect_analog; |
| } |
| |
| /* Override encoder type for DVI-I based on whether EDID |
| * says the display is digital or analog, both use the |
| * same i2c channel so the value returned from ddc_detect |
| * isn't necessarily correct. |
| */ |
| nv_partner = NULL; |
| if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS) |
| nv_partner = find_encoder(connector, DCB_OUTPUT_ANALOG); |
| if (nv_encoder->dcb->type == DCB_OUTPUT_ANALOG) |
| nv_partner = find_encoder(connector, DCB_OUTPUT_TMDS); |
| |
| if (nv_partner && ((nv_encoder->dcb->type == DCB_OUTPUT_ANALOG && |
| nv_partner->dcb->type == DCB_OUTPUT_TMDS) || |
| (nv_encoder->dcb->type == DCB_OUTPUT_TMDS && |
| nv_partner->dcb->type == DCB_OUTPUT_ANALOG))) { |
| if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL) |
| type = DCB_OUTPUT_TMDS; |
| else |
| type = DCB_OUTPUT_ANALOG; |
| |
| nv_encoder = find_encoder(connector, type); |
| } |
| |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| conn_status = connector_status_connected; |
| goto out; |
| } |
| |
| nv_encoder = nouveau_connector_of_detect(connector); |
| if (nv_encoder) { |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| conn_status = connector_status_connected; |
| goto out; |
| } |
| |
| detect_analog: |
| nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG); |
| if (!nv_encoder && !nouveau_tv_disable) |
| nv_encoder = find_encoder(connector, DCB_OUTPUT_TV); |
| if (nv_encoder && force) { |
| struct drm_encoder *encoder = to_drm_encoder(nv_encoder); |
| const struct drm_encoder_helper_funcs *helper = |
| encoder->helper_private; |
| |
| if (helper->detect(encoder, connector) == |
| connector_status_connected) { |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| conn_status = connector_status_connected; |
| goto out; |
| } |
| |
| } |
| |
| out: |
| |
| pm_runtime_mark_last_busy(connector->dev->dev); |
| pm_runtime_put_autosuspend(connector->dev->dev); |
| |
| return conn_status; |
| } |
| |
| static enum drm_connector_status |
| nouveau_connector_detect_lvds(struct drm_connector *connector, bool force) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = NULL; |
| enum drm_connector_status status = connector_status_disconnected; |
| |
| /* Cleanup the previous EDID block. */ |
| if (nv_connector->edid) { |
| drm_mode_connector_update_edid_property(connector, NULL); |
| kfree(nv_connector->edid); |
| nv_connector->edid = NULL; |
| } |
| |
| nv_encoder = find_encoder(connector, DCB_OUTPUT_LVDS); |
| if (!nv_encoder) |
| return connector_status_disconnected; |
| |
| /* Try retrieving EDID via DDC */ |
| if (!drm->vbios.fp_no_ddc) { |
| status = nouveau_connector_detect(connector, force); |
| if (status == connector_status_connected) |
| goto out; |
| } |
| |
| /* On some laptops (Sony, i'm looking at you) there appears to |
| * be no direct way of accessing the panel's EDID. The only |
| * option available to us appears to be to ask ACPI for help.. |
| * |
| * It's important this check's before trying straps, one of the |
| * said manufacturer's laptops are configured in such a way |
| * the nouveau decides an entry in the VBIOS FP mode table is |
| * valid - it's not (rh#613284) |
| */ |
| if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) { |
| if ((nv_connector->edid = nouveau_acpi_edid(dev, connector))) { |
| status = connector_status_connected; |
| goto out; |
| } |
| } |
| |
| /* If no EDID found above, and the VBIOS indicates a hardcoded |
| * modeline is avalilable for the panel, set it as the panel's |
| * native mode and exit. |
| */ |
| if (nouveau_bios_fp_mode(dev, NULL) && (drm->vbios.fp_no_ddc || |
| nv_encoder->dcb->lvdsconf.use_straps_for_mode)) { |
| status = connector_status_connected; |
| goto out; |
| } |
| |
| /* Still nothing, some VBIOS images have a hardcoded EDID block |
| * stored for the panel stored in them. |
| */ |
| if (!drm->vbios.fp_no_ddc) { |
| struct edid *edid = |
| (struct edid *)nouveau_bios_embedded_edid(dev); |
| if (edid) { |
| nv_connector->edid = |
| kmemdup(edid, EDID_LENGTH, GFP_KERNEL); |
| if (nv_connector->edid) |
| status = connector_status_connected; |
| } |
| } |
| |
| out: |
| #if defined(CONFIG_ACPI_BUTTON) || \ |
| (defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE)) |
| if (status == connector_status_connected && |
| !nouveau_ignorelid && !acpi_lid_open()) |
| status = connector_status_unknown; |
| #endif |
| |
| drm_mode_connector_update_edid_property(connector, nv_connector->edid); |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| return status; |
| } |
| |
| static void |
| nouveau_connector_force(struct drm_connector *connector) |
| { |
| struct nouveau_drm *drm = nouveau_drm(connector->dev); |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder; |
| int type; |
| |
| if (nv_connector->type == DCB_CONNECTOR_DVI_I) { |
| if (connector->force == DRM_FORCE_ON_DIGITAL) |
| type = DCB_OUTPUT_TMDS; |
| else |
| type = DCB_OUTPUT_ANALOG; |
| } else |
| type = DCB_OUTPUT_ANY; |
| |
| nv_encoder = find_encoder(connector, type); |
| if (!nv_encoder) { |
| NV_ERROR(drm, "can't find encoder to force %s on!\n", |
| connector->name); |
| connector->status = connector_status_disconnected; |
| return; |
| } |
| |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| } |
| |
| static int |
| nouveau_connector_set_property(struct drm_connector *connector, |
| struct drm_property *property, uint64_t value) |
| { |
| struct nouveau_conn_atom *asyc = nouveau_conn_atom(connector->state); |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; |
| struct drm_encoder *encoder = to_drm_encoder(nv_encoder); |
| int ret; |
| |
| ret = connector->funcs->atomic_set_property(&nv_connector->base, |
| &asyc->state, |
| property, value); |
| if (ret) { |
| if (nv_encoder && nv_encoder->dcb->type == DCB_OUTPUT_TV) |
| return get_slave_funcs(encoder)->set_property( |
| encoder, connector, property, value); |
| return ret; |
| } |
| |
| nv_connector->scaling_mode = asyc->scaler.mode; |
| nv_connector->dithering_mode = asyc->dither.mode; |
| |
| if (connector->encoder && connector->encoder->crtc) { |
| ret = drm_crtc_helper_set_mode(connector->encoder->crtc, |
| &connector->encoder->crtc->mode, |
| connector->encoder->crtc->x, |
| connector->encoder->crtc->y, |
| NULL); |
| if (!ret) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| struct moderec { |
| int hdisplay; |
| int vdisplay; |
| }; |
| |
| static struct moderec scaler_modes[] = { |
| { 1920, 1200 }, |
| { 1920, 1080 }, |
| { 1680, 1050 }, |
| { 1600, 1200 }, |
| { 1400, 1050 }, |
| { 1280, 1024 }, |
| { 1280, 960 }, |
| { 1152, 864 }, |
| { 1024, 768 }, |
| { 800, 600 }, |
| { 720, 400 }, |
| { 640, 480 }, |
| { 640, 400 }, |
| { 640, 350 }, |
| {} |
| }; |
| |
| static int |
| nouveau_connector_scaler_modes_add(struct drm_connector *connector) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct drm_display_mode *native = nv_connector->native_mode, *m; |
| struct drm_device *dev = connector->dev; |
| struct moderec *mode = &scaler_modes[0]; |
| int modes = 0; |
| |
| if (!native) |
| return 0; |
| |
| while (mode->hdisplay) { |
| if (mode->hdisplay <= native->hdisplay && |
| mode->vdisplay <= native->vdisplay && |
| (mode->hdisplay != native->hdisplay || |
| mode->vdisplay != native->vdisplay)) { |
| m = drm_cvt_mode(dev, mode->hdisplay, mode->vdisplay, |
| drm_mode_vrefresh(native), false, |
| false, false); |
| if (!m) |
| continue; |
| |
| drm_mode_probed_add(connector, m); |
| modes++; |
| } |
| |
| mode++; |
| } |
| |
| return modes; |
| } |
| |
| static void |
| nouveau_connector_detect_depth(struct drm_connector *connector) |
| { |
| struct nouveau_drm *drm = nouveau_drm(connector->dev); |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; |
| struct nvbios *bios = &drm->vbios; |
| struct drm_display_mode *mode = nv_connector->native_mode; |
| bool duallink; |
| |
| /* if the edid is feeling nice enough to provide this info, use it */ |
| if (nv_connector->edid && connector->display_info.bpc) |
| return; |
| |
| /* EDID 1.4 is *supposed* to be supported on eDP, but, Apple... */ |
| if (nv_connector->type == DCB_CONNECTOR_eDP) { |
| connector->display_info.bpc = 6; |
| return; |
| } |
| |
| /* we're out of options unless we're LVDS, default to 8bpc */ |
| if (nv_encoder->dcb->type != DCB_OUTPUT_LVDS) { |
| connector->display_info.bpc = 8; |
| return; |
| } |
| |
| connector->display_info.bpc = 6; |
| |
| /* LVDS: panel straps */ |
| if (bios->fp_no_ddc) { |
| if (bios->fp.if_is_24bit) |
| connector->display_info.bpc = 8; |
| return; |
| } |
| |
| /* LVDS: DDC panel, need to first determine the number of links to |
| * know which if_is_24bit flag to check... |
| */ |
| if (nv_connector->edid && |
| nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) |
| duallink = ((u8 *)nv_connector->edid)[121] == 2; |
| else |
| duallink = mode->clock >= bios->fp.duallink_transition_clk; |
| |
| if ((!duallink && (bios->fp.strapless_is_24bit & 1)) || |
| ( duallink && (bios->fp.strapless_is_24bit & 2))) |
| connector->display_info.bpc = 8; |
| } |
| |
| static int |
| nouveau_connector_get_modes(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; |
| struct drm_encoder *encoder = to_drm_encoder(nv_encoder); |
| int ret = 0; |
| |
| /* destroy the native mode, the attached monitor could have changed. |
| */ |
| if (nv_connector->native_mode) { |
| drm_mode_destroy(dev, nv_connector->native_mode); |
| nv_connector->native_mode = NULL; |
| } |
| |
| if (nv_connector->edid) |
| ret = drm_add_edid_modes(connector, nv_connector->edid); |
| else |
| if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS && |
| (nv_encoder->dcb->lvdsconf.use_straps_for_mode || |
| drm->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) { |
| struct drm_display_mode mode; |
| |
| nouveau_bios_fp_mode(dev, &mode); |
| nv_connector->native_mode = drm_mode_duplicate(dev, &mode); |
| } |
| |
| /* Determine display colour depth for everything except LVDS now, |
| * DP requires this before mode_valid() is called. |
| */ |
| if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS) |
| nouveau_connector_detect_depth(connector); |
| |
| /* Find the native mode if this is a digital panel, if we didn't |
| * find any modes through DDC previously add the native mode to |
| * the list of modes. |
| */ |
| if (!nv_connector->native_mode) |
| nv_connector->native_mode = nouveau_conn_native_mode(connector); |
| if (ret == 0 && nv_connector->native_mode) { |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(dev, nv_connector->native_mode); |
| drm_mode_probed_add(connector, mode); |
| ret = 1; |
| } |
| |
| /* Determine LVDS colour depth, must happen after determining |
| * "native" mode as some VBIOS tables require us to use the |
| * pixel clock as part of the lookup... |
| */ |
| if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) |
| nouveau_connector_detect_depth(connector); |
| |
| if (nv_encoder->dcb->type == DCB_OUTPUT_TV) |
| ret = get_slave_funcs(encoder)->get_modes(encoder, connector); |
| |
| if (nv_connector->type == DCB_CONNECTOR_LVDS || |
| nv_connector->type == DCB_CONNECTOR_LVDS_SPWG || |
| nv_connector->type == DCB_CONNECTOR_eDP) |
| ret += nouveau_connector_scaler_modes_add(connector); |
| |
| return ret; |
| } |
| |
| static unsigned |
| get_tmds_link_bandwidth(struct drm_connector *connector, bool hdmi) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_drm *drm = nouveau_drm(connector->dev); |
| struct dcb_output *dcb = nv_connector->detected_encoder->dcb; |
| |
| if (hdmi) { |
| if (nouveau_hdmimhz > 0) |
| return nouveau_hdmimhz * 1000; |
| /* Note: these limits are conservative, some Fermi's |
| * can do 297 MHz. Unclear how this can be determined. |
| */ |
| if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_KEPLER) |
| return 297000; |
| if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_FERMI) |
| return 225000; |
| } |
| if (dcb->location != DCB_LOC_ON_CHIP || |
| drm->client.device.info.chipset >= 0x46) |
| return 165000; |
| else if (drm->client.device.info.chipset >= 0x40) |
| return 155000; |
| else if (drm->client.device.info.chipset >= 0x18) |
| return 135000; |
| else |
| return 112000; |
| } |
| |
| static int |
| nouveau_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; |
| struct drm_encoder *encoder = to_drm_encoder(nv_encoder); |
| unsigned min_clock = 25000, max_clock = min_clock; |
| unsigned clock = mode->clock; |
| bool hdmi; |
| |
| switch (nv_encoder->dcb->type) { |
| case DCB_OUTPUT_LVDS: |
| if (nv_connector->native_mode && |
| (mode->hdisplay > nv_connector->native_mode->hdisplay || |
| mode->vdisplay > nv_connector->native_mode->vdisplay)) |
| return MODE_PANEL; |
| |
| min_clock = 0; |
| max_clock = 400000; |
| break; |
| case DCB_OUTPUT_TMDS: |
| hdmi = drm_detect_hdmi_monitor(nv_connector->edid); |
| max_clock = get_tmds_link_bandwidth(connector, hdmi); |
| if (!hdmi && nouveau_duallink && |
| nv_encoder->dcb->duallink_possible) |
| max_clock *= 2; |
| break; |
| case DCB_OUTPUT_ANALOG: |
| max_clock = nv_encoder->dcb->crtconf.maxfreq; |
| if (!max_clock) |
| max_clock = 350000; |
| break; |
| case DCB_OUTPUT_TV: |
| return get_slave_funcs(encoder)->mode_valid(encoder, mode); |
| case DCB_OUTPUT_DP: |
| max_clock = nv_encoder->dp.link_nr; |
| max_clock *= nv_encoder->dp.link_bw; |
| clock = clock * (connector->display_info.bpc * 3) / 10; |
| break; |
| default: |
| BUG(); |
| return MODE_BAD; |
| } |
| |
| if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING) |
| clock *= 2; |
| |
| if (clock < min_clock) |
| return MODE_CLOCK_LOW; |
| |
| if (clock > max_clock) |
| return MODE_CLOCK_HIGH; |
| |
| return MODE_OK; |
| } |
| |
| static struct drm_encoder * |
| nouveau_connector_best_encoder(struct drm_connector *connector) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| |
| if (nv_connector->detected_encoder) |
| return to_drm_encoder(nv_connector->detected_encoder); |
| |
| return NULL; |
| } |
| |
| static const struct drm_connector_helper_funcs |
| nouveau_connector_helper_funcs = { |
| .get_modes = nouveau_connector_get_modes, |
| .mode_valid = nouveau_connector_mode_valid, |
| .best_encoder = nouveau_connector_best_encoder, |
| }; |
| |
| static const struct drm_connector_funcs |
| nouveau_connector_funcs = { |
| .dpms = drm_helper_connector_dpms, |
| .reset = nouveau_conn_reset, |
| .detect = nouveau_connector_detect, |
| .force = nouveau_connector_force, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .set_property = nouveau_connector_set_property, |
| .destroy = nouveau_connector_destroy, |
| .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, |
| .atomic_destroy_state = nouveau_conn_atomic_destroy_state, |
| .atomic_set_property = nouveau_conn_atomic_set_property, |
| .atomic_get_property = nouveau_conn_atomic_get_property, |
| }; |
| |
| static const struct drm_connector_funcs |
| nouveau_connector_funcs_lvds = { |
| .dpms = drm_helper_connector_dpms, |
| .reset = nouveau_conn_reset, |
| .detect = nouveau_connector_detect_lvds, |
| .force = nouveau_connector_force, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .set_property = nouveau_connector_set_property, |
| .destroy = nouveau_connector_destroy, |
| .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, |
| .atomic_destroy_state = nouveau_conn_atomic_destroy_state, |
| .atomic_set_property = nouveau_conn_atomic_set_property, |
| .atomic_get_property = nouveau_conn_atomic_get_property, |
| }; |
| |
| static int |
| nouveau_connector_hotplug(struct nvif_notify *notify) |
| { |
| struct nouveau_connector *nv_connector = |
| container_of(notify, typeof(*nv_connector), hpd); |
| struct drm_connector *connector = &nv_connector->base; |
| struct nouveau_drm *drm = nouveau_drm(connector->dev); |
| const struct nvif_notify_conn_rep_v0 *rep = notify->data; |
| const char *name = connector->name; |
| struct nouveau_encoder *nv_encoder; |
| |
| if (rep->mask & NVIF_NOTIFY_CONN_V0_IRQ) { |
| NV_DEBUG(drm, "service %s\n", name); |
| if ((nv_encoder = find_encoder(connector, DCB_OUTPUT_DP))) |
| nv50_mstm_service(nv_encoder->dp.mstm); |
| } else { |
| bool plugged = (rep->mask != NVIF_NOTIFY_CONN_V0_UNPLUG); |
| |
| NV_DEBUG(drm, "%splugged %s\n", plugged ? "" : "un", name); |
| if ((nv_encoder = find_encoder(connector, DCB_OUTPUT_DP))) { |
| if (!plugged) |
| nv50_mstm_remove(nv_encoder->dp.mstm); |
| } |
| |
| drm_helper_hpd_irq_event(connector->dev); |
| } |
| |
| return NVIF_NOTIFY_KEEP; |
| } |
| |
| static ssize_t |
| nouveau_connector_aux_xfer(struct drm_dp_aux *obj, struct drm_dp_aux_msg *msg) |
| { |
| struct nouveau_connector *nv_connector = |
| container_of(obj, typeof(*nv_connector), aux); |
| struct nouveau_encoder *nv_encoder; |
| struct nvkm_i2c_aux *aux; |
| u8 size = msg->size; |
| int ret; |
| |
| nv_encoder = find_encoder(&nv_connector->base, DCB_OUTPUT_DP); |
| if (!nv_encoder || !(aux = nv_encoder->aux)) |
| return -ENODEV; |
| if (WARN_ON(msg->size > 16)) |
| return -E2BIG; |
| |
| ret = nvkm_i2c_aux_acquire(aux); |
| if (ret) |
| return ret; |
| |
| ret = nvkm_i2c_aux_xfer(aux, false, msg->request, msg->address, |
| msg->buffer, &size); |
| nvkm_i2c_aux_release(aux); |
| if (ret >= 0) { |
| msg->reply = ret; |
| return size; |
| } |
| |
| return ret; |
| } |
| |
| static int |
| drm_conntype_from_dcb(enum dcb_connector_type dcb) |
| { |
| switch (dcb) { |
| case DCB_CONNECTOR_VGA : return DRM_MODE_CONNECTOR_VGA; |
| case DCB_CONNECTOR_TV_0 : |
| case DCB_CONNECTOR_TV_1 : |
| case DCB_CONNECTOR_TV_3 : return DRM_MODE_CONNECTOR_TV; |
| case DCB_CONNECTOR_DMS59_0 : |
| case DCB_CONNECTOR_DMS59_1 : |
| case DCB_CONNECTOR_DVI_I : return DRM_MODE_CONNECTOR_DVII; |
| case DCB_CONNECTOR_DVI_D : return DRM_MODE_CONNECTOR_DVID; |
| case DCB_CONNECTOR_LVDS : |
| case DCB_CONNECTOR_LVDS_SPWG: return DRM_MODE_CONNECTOR_LVDS; |
| case DCB_CONNECTOR_DMS59_DP0: |
| case DCB_CONNECTOR_DMS59_DP1: |
| case DCB_CONNECTOR_DP : return DRM_MODE_CONNECTOR_DisplayPort; |
| case DCB_CONNECTOR_eDP : return DRM_MODE_CONNECTOR_eDP; |
| case DCB_CONNECTOR_HDMI_0 : |
| case DCB_CONNECTOR_HDMI_1 : |
| case DCB_CONNECTOR_HDMI_C : return DRM_MODE_CONNECTOR_HDMIA; |
| case DCB_CONNECTOR_WFD : return DRM_MODE_CONNECTOR_VIRTUAL; |
| default: |
| break; |
| } |
| |
| return DRM_MODE_CONNECTOR_Unknown; |
| } |
| |
| struct drm_connector * |
| nouveau_connector_create(struct drm_device *dev, int index) |
| { |
| const struct drm_connector_funcs *funcs = &nouveau_connector_funcs; |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct nouveau_display *disp = nouveau_display(dev); |
| struct nouveau_connector *nv_connector = NULL; |
| struct drm_connector *connector; |
| int type, ret = 0; |
| bool dummy; |
| |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| nv_connector = nouveau_connector(connector); |
| if (nv_connector->index == index) |
| return connector; |
| } |
| |
| nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL); |
| if (!nv_connector) |
| return ERR_PTR(-ENOMEM); |
| |
| connector = &nv_connector->base; |
| nv_connector->index = index; |
| |
| /* attempt to parse vbios connector type and hotplug gpio */ |
| nv_connector->dcb = olddcb_conn(dev, index); |
| if (nv_connector->dcb) { |
| u32 entry = ROM16(nv_connector->dcb[0]); |
| if (olddcb_conntab(dev)[3] >= 4) |
| entry |= (u32)ROM16(nv_connector->dcb[2]) << 16; |
| |
| nv_connector->type = nv_connector->dcb[0]; |
| if (drm_conntype_from_dcb(nv_connector->type) == |
| DRM_MODE_CONNECTOR_Unknown) { |
| NV_WARN(drm, "unknown connector type %02x\n", |
| nv_connector->type); |
| nv_connector->type = DCB_CONNECTOR_NONE; |
| } |
| |
| /* Gigabyte NX85T */ |
| if (nv_match_device(dev, 0x0421, 0x1458, 0x344c)) { |
| if (nv_connector->type == DCB_CONNECTOR_HDMI_1) |
| nv_connector->type = DCB_CONNECTOR_DVI_I; |
| } |
| |
| /* Gigabyte GV-NX86T512H */ |
| if (nv_match_device(dev, 0x0402, 0x1458, 0x3455)) { |
| if (nv_connector->type == DCB_CONNECTOR_HDMI_1) |
| nv_connector->type = DCB_CONNECTOR_DVI_I; |
| } |
| } else { |
| nv_connector->type = DCB_CONNECTOR_NONE; |
| } |
| |
| /* no vbios data, or an unknown dcb connector type - attempt to |
| * figure out something suitable ourselves |
| */ |
| if (nv_connector->type == DCB_CONNECTOR_NONE) { |
| struct nouveau_drm *drm = nouveau_drm(dev); |
| struct dcb_table *dcbt = &drm->vbios.dcb; |
| u32 encoders = 0; |
| int i; |
| |
| for (i = 0; i < dcbt->entries; i++) { |
| if (dcbt->entry[i].connector == nv_connector->index) |
| encoders |= (1 << dcbt->entry[i].type); |
| } |
| |
| if (encoders & (1 << DCB_OUTPUT_DP)) { |
| if (encoders & (1 << DCB_OUTPUT_TMDS)) |
| nv_connector->type = DCB_CONNECTOR_DP; |
| else |
| nv_connector->type = DCB_CONNECTOR_eDP; |
| } else |
| if (encoders & (1 << DCB_OUTPUT_TMDS)) { |
| if (encoders & (1 << DCB_OUTPUT_ANALOG)) |
| nv_connector->type = DCB_CONNECTOR_DVI_I; |
| else |
| nv_connector->type = DCB_CONNECTOR_DVI_D; |
| } else |
| if (encoders & (1 << DCB_OUTPUT_ANALOG)) { |
| nv_connector->type = DCB_CONNECTOR_VGA; |
| } else |
| if (encoders & (1 << DCB_OUTPUT_LVDS)) { |
| nv_connector->type = DCB_CONNECTOR_LVDS; |
| } else |
| if (encoders & (1 << DCB_OUTPUT_TV)) { |
| nv_connector->type = DCB_CONNECTOR_TV_0; |
| } |
| } |
| |
| switch ((type = drm_conntype_from_dcb(nv_connector->type))) { |
| case DRM_MODE_CONNECTOR_LVDS: |
| ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &dummy); |
| if (ret) { |
| NV_ERROR(drm, "Error parsing LVDS table, disabling\n"); |
| kfree(nv_connector); |
| return ERR_PTR(ret); |
| } |
| |
| funcs = &nouveau_connector_funcs_lvds; |
| break; |
| case DRM_MODE_CONNECTOR_DisplayPort: |
| case DRM_MODE_CONNECTOR_eDP: |
| nv_connector->aux.dev = dev->dev; |
| nv_connector->aux.transfer = nouveau_connector_aux_xfer; |
| ret = drm_dp_aux_register(&nv_connector->aux); |
| if (ret) { |
| NV_ERROR(drm, "failed to register aux channel\n"); |
| kfree(nv_connector); |
| return ERR_PTR(ret); |
| } |
| |
| funcs = &nouveau_connector_funcs; |
| break; |
| default: |
| funcs = &nouveau_connector_funcs; |
| break; |
| } |
| |
| /* HDMI 3D support */ |
| if ((disp->disp.oclass >= G82_DISP) |
| && ((type == DRM_MODE_CONNECTOR_DisplayPort) |
| || (type == DRM_MODE_CONNECTOR_eDP) |
| || (type == DRM_MODE_CONNECTOR_HDMIA))) |
| connector->stereo_allowed = true; |
| |
| /* defaults, will get overridden in detect() */ |
| connector->interlace_allowed = false; |
| connector->doublescan_allowed = false; |
| |
| drm_connector_init(dev, connector, funcs, type); |
| drm_connector_helper_add(connector, &nouveau_connector_helper_funcs); |
| |
| connector->funcs->reset(connector); |
| nouveau_conn_attach_properties(connector); |
| |
| /* Default scaling mode */ |
| switch (nv_connector->type) { |
| case DCB_CONNECTOR_LVDS: |
| case DCB_CONNECTOR_LVDS_SPWG: |
| case DCB_CONNECTOR_eDP: |
| /* see note in nouveau_connector_set_property() */ |
| if (disp->disp.oclass < NV50_DISP) { |
| nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN; |
| break; |
| } |
| nv_connector->scaling_mode = DRM_MODE_SCALE_NONE; |
| break; |
| default: |
| nv_connector->scaling_mode = DRM_MODE_SCALE_NONE; |
| break; |
| } |
| |
| /* dithering properties */ |
| switch (nv_connector->type) { |
| case DCB_CONNECTOR_TV_0: |
| case DCB_CONNECTOR_TV_1: |
| case DCB_CONNECTOR_TV_3: |
| case DCB_CONNECTOR_VGA: |
| break; |
| default: |
| nv_connector->dithering_mode = DITHERING_MODE_AUTO; |
| break; |
| } |
| |
| ret = nvif_notify_init(&disp->disp, nouveau_connector_hotplug, true, |
| NV04_DISP_NTFY_CONN, |
| &(struct nvif_notify_conn_req_v0) { |
| .mask = NVIF_NOTIFY_CONN_V0_ANY, |
| .conn = index, |
| }, |
| sizeof(struct nvif_notify_conn_req_v0), |
| sizeof(struct nvif_notify_conn_rep_v0), |
| &nv_connector->hpd); |
| if (ret) |
| connector->polled = DRM_CONNECTOR_POLL_CONNECT; |
| else |
| connector->polled = DRM_CONNECTOR_POLL_HPD; |
| |
| drm_connector_register(connector); |
| return connector; |
| } |